Yecheng Liu, Kemin Xue, Yuan Liu, Jiajie Zhao, Junjia Lian, Ping Li (2026). Microstructural evolution, secondary phase precipitation and mechanical behavior of N36 zirconium alloy processed by BPMABE and current annealing. Materials Characterization.DOI
Junfu Dong, Kemin Xue, Tianle Wang, Shibo Xue, Chenyang Wang, Kun Zhou, Shuangwu Xia, Hui Li, Weiwei Li, P Q Li (2026). Study on the coupling effects of solution treatment and extrusion ratio on the microstructure, texture evolution, and mechanical properties of Mg-Gd-Y-Zn-Zr alloy. Journal of Alloys and Compounds.DOI
Ping Li (31981), Jianfeng Shi, Yashan Guo, Haixiang Wang, Kemin Xue (2026). Effects of Equal Channel Double Angular Pressing on the Microstructure and Mechanical Properties of Zr-Sn-Nb-Fe Alloy. Journal of Materials Engineering and Performance.DOI
Baisong Liu, Ping Li, Shaofeng Liu, Yingsheng Li, Lin Zhong, Kemin Xue, Renhai Yu (2026). Electroplasticity in Ti-6Al-4V alloy: Effects of pulsed current loading modes on mechanical properties and microstructural evolution under near-isothermal conditions. Materials Science and Engineering A.DOI
Zhehuan Tian, Kemin Xue, Chi Zhang, Guoqiang Wang, Yiyang Zhou, Kecheng Wang, Wenchao Shi, Ping Li (2026). Interfacial formation mechanisms of B4C-reinforced 6082Al composites via cyclic extrusion compression. Vacuum.DOI
Chi Zhang, Kemin Xue, Zhehuan Tian, Guotao Wang, Yiyang Zhou, Wenchao Shi, Ping Li (2026). Mechanical Behavior and Neutron Shielding Performance of B4C/6082Al Composites Consolidated through Cyclic Extrusion Compression. Journal of Materials Engineering and Performance.DOI
Kemin Xue, Liangwei Dai, Zhipeng Chen, Kecheng Wang, Ping Li (2026). Study on Irradiation Resistance of RAFM Steel Subjected to Closed Double Equal Channel Angular Pressing. Journal of Materials Engineering and Performance.DOI
Zilong Liu, Jun-yuan Zhang, Si-liang Yan, Kemin Xue, Ping Li, Miao Meng (2026). Achieving strength-ductility synergy in X2A66 aluminum-lithium alloy by tuning T1 phase morphology in tailored heat treatments. Journal of Alloys and Compounds.DOI
Chi Zhang, Kemin Xue, Zhehuan Tian, Guotao Wang, Yiyang Zhou, Wenchao Shi, Ping Li (2026). Characterization of microstructure and hardening of B4C/6082Al neutron absorbing composites irradiated by He ions. Journal of Materials Research and Technology.DOI
张勇强，薛克敏，孟淼，严思梁，李萍（2025）. 具有不同典型显微组织Ti-22Al-26Nb合金的高温断裂行为（英文）. Transactions of Nonferrous Metals Society of China.
Baisong Liu, Ping Li, Shaofeng Liu, Lin Zhong, Yingsheng Li, Heli Peng, Kemin Xue (2025). The relationship between dynamic recrystallization and dislocation slip in Ti-6Al-4V alloy under high-energy short-duration electrical pulsing. Journal of Alloys and Compounds.DOI
Kemin Xue, Yecheng Liu, Ao Zhang, Jiajie Zhao, Yuan Liu, Ping Li (2025). Effect of current annealing on microstructure and twin-induced texture evolution in N36 zirconium alloy. International Journal of Refractory Metals and Hard Materials.DOI
Xue Wang, Aofei Jiao, Yahui Zhu, Yashan Guo, Kemin Xue, Ping Li (2025). Microstructure evolution and microhardness improvement of tantalum-modified tungsten heavy alloy processed by high-pressure torsion processing. International Journal of Refractory Metals and Hard Materials.DOI
Ping Li, Baisong Liu, Shaofeng Liu, Siliang Yan, Kemin Xue (2025). A Study on the Mechanism of the Effect of Low‐Frequency High‐Density Pulse Current on the Strength and Ductility of TC4 Titanium Alloy. Advanced Engineering Materials.DOI
Kemin Xue, Chi Zhang, Zhehuan Tian, Guotao Wang, Guoqiang Gan, Ping Li (2025). B4C/6082Al Composites Fabricated by Cyclic Extrusion and Compression: Microstructure and Mechanical Properties at Different Deformation Temperatures. Advanced Engineering Materials.DOI
Renhai Yu, Shaofeng Liu, Paul Ling, Bosong Liu, Yingsheng Li, Lin Zhong, Kemin Xue (2025). Forming characteristics and precision control method of Ti60 titanium alloy ultra-thin hyperbolic shell in electro-assisted drawing. Journal of Materials Research and Technology.DOI
Yongqiang Zhang, Kemin Xue, Miao MENG, Si-liang Yan, Ping Li (2025). High-temperature fracture behavior of Ti−22Al−26Nb with different featured microstructures. Transactions of Nonferrous Metals Society of China.DOI
Ping Li, Renhai Yu, B. Zhang, Yang Wang, Jie Chu, Kemin Xue (2025). Study on Mechanical Behavior and Forming Simulation of Ultra-Thin 8011 Aluminum Alloy. Journal of Materials Engineering and Performance.DOI
Siliang Yan, Zilong Liu, Yongqiang Zhang, Xiaoli Zhang, Kemin Xue, Miao Meng (2024). Molecular dynamics study on the microstructure evolution of Ti2AlNb-based alloy subjected to tensile pre-strain and electric current treatment. Journal of Materials Science.DOI
Renhai Yu, Siliang Yan, Kemin Xue, Shaofeng Liu, Ping Li (2024). Dislocation density evolution and related model construction of Ti60 alloy under multi-physical field coupling. Materials Today Communications.DOI
Yashan Guo, Ning Guo, Ao Zhang, Kemin Xue, Ping Li (2024). Effect of severe plastic deformation on surface modification of tungsten exposed to low energy helium ion irradiation. Fusion Engineering and Design.DOI
Shuangwu Xia, Ping Li, Junfu Dong, Tianle Wang, Kemin Xue (2024). Study of strength-ductility and anisotropic behavior of Mg-Gd-Y-Zn-Zr alloy prepared by Equal channel double angular pressing. Materials Today Communications.DOI
Shenghua Guo, Kemin Xue, Si-liang Yan, Ping Li (2024). Grain Size Effects on the Rheological Behavior of Ti2AlNb-Based Alloy by Transverse Ultrasonic Vibration-Assisted Compression. Journal of Materials Engineering and Performance.DOI
Siliang Yan, Lan-qing Yang, Lei Hu, Zilong Liu, Miao Meng, Heli Peng, Su-tong Yu, Kemin Xue (2024). Unconventional mechanical responses and mechanisms of Ti-6Al-4V sheet subjected to electrically-assisted cyclic loading-unloading: Thermal and athermal effects. Materials Science and Engineering A.DOI
Chuanmei Xue, Liangwei Dai, Jiren Dai, Zhaoyu Wang, Wenchun Tian, Kemin Xue (2024). Effect of deformation on the mechanical property of reduced activation ferritic/martensitic steel refined by closed-dual equal channel angular pressing. Materials Testing.DOI
Kemin Xue, Zhehuan Tian, Kecheng Wang, Yunhui Li, Wenchao Shi, Ping Li (2024). Effect of a Novel Thermomechanical Treatment on Microstructure and Mechanical Properties of 7034 Aluminum Alloy. Journal of Materials Engineering and Performance.DOI
Ping Li, Shuangwu Xia, Junfu Dong, Liangwei Dai, Zhicheng Luo, Kemin Xue (2024). Effect of Bimodal Quasicrystal Phase on the Dynamic Recrystallization of Mg–Zn–Gd Alloy during High-Pressure Torsion. Acta Metallurgica Sinica (English Letters).DOI
Ping Li, Renhai Yu, Si-liang Yan, Chi Zhang, Yang Wang, Lanqing Yang, Kemin Xue (2023). Study on deformation behavior of Ti60 alloy based on multi-physics coupling. Materials Today Communications.DOI
Kemin Xue, Zhicheng Luo, Shuangwu Xia, Junfu Dong, Ping Li (2023). Study of microstructural evolution, mechanical properties and plastic deformation behavior of Mg-Gd-Y-Zn-Zr alloy prepared by high-pressure torsion. Materials Science and Engineering A.DOI
Wenchun Tian, Ping Li, Siliang Yan, Chuanmei Xue, Kemin Xue (2023). Study on the Improved Mechanical Properties of RAFM Steel After Dual Equal-Channel Lateral Extrusion: Reflected by Quantified Microstructure. Transactions of the Indian Institute of Metals.DOI
Ping Li, Haixiang Wang, Yashan Guo, Ao Zhang, Kemin Xue (2023). Deformation Behavior and Microstructural Evolution of Zr–Sn–Nb–Fe Alloy over a Wide Temperature Range Based on the Law of Mixture. Advanced Engineering Materials.DOI
Kemin Xue, Zhehuan Tian, Rui Juan Xie, Ping Li (2023). Effect of high pressure torsion on interfaces and mechanical properties of SiC/Al composite. Vacuum.DOI
Ping Li, Shuangwu Xia, Yufeng Zhou, Mingming Wang, Zhicheng Luo, Kemin Xue (2023). Quasicrystal phase evolution and mechanical properties of Mg-3.5Zn-0.6Gd alloy processed by high-pressure torsion. Vacuum.DOI
Kemin Xue, Yongqiang Zhang, Miao Meng, Lusheng Wang, Ping Li (2023). Fracture behavior of B2 phase matrix of Ti2AlNb-based alloy with microcracks of different orientations. Engineering Fracture Mechanics.DOI
Ping Li, Le Liu, Lei Hu, Yue Zhang, Si-liang Yan, Kemin Xue (2023). Flow softening rules and mechanisms in Ti–6Al–4V alloy sheet during electrically assisted near-isothermal tension. Journal of Materials Science.DOI
Kemin Xue, Shenghua Guo, Xiaohu Ji, Miao Meng, Ping Li (2022). Investigation on Ultrasonic Vibration Effects on the Plastic Flow Behavior of Ti2AlNb Alloy: Johnson–Cook Model. Journal of Materials Engineering and Performance.DOI
Ping Li, Jiren Dai, Lusheng Wang, Yufeng Zhou, Zhaoyu Wang, Kemin Xue (2022). The effect and mechanism of closed double equal channel angular pressing deformation on He+ irradiation damage of low activation steel. Fusion Engineering and Design.DOI
Kemin Xue, Wenchun Tian, Siliang Yan, Huiling Zhu, Ping Li (2022). A Unified Constitutive Model for CLAM Steel Coupling Microstructure Evolution and Considering Phase Transformation in a Wide Range of Temperatures. Transactions of the Indian Institute of Metals.DOI
Kemin Xue, Zhaoyu Wang, Wenchun Tian, Jiren Dai, Qinghang Hu, Ping Li (2022). Effect of deformation behavior on the evolution of microstructure of RAFM steel subject to closed-dual equal channel angular pressing. Fusion Engineering and Design.DOI
Kemin Xue, Wenchun Tian, Qinghang Hu, Siliang Yan, Ping Li (2022). Comprehensive improvement of strength and ductility in CLAM steel subjected to TEU: The role of heterogeneous microstructure. Journal of Nuclear Materials.DOI
Lusheng Wang, Siliang Yan, Miao Meng, Kemin Xue, Ping Li (2022). Twin boundary-assisted improvement of radiation resistance of iron: Defect evolution, mechanical properties, and deformation mechanism. Journal of Nuclear Materials.DOI
Kemin Xue, Shenghui Guo, Wentong Guo, M. Meng, Xiankun Ji, P. Li (2022). Microstructure evolution and mechanical properties of severely deformed TA15 alloy by multi‐directional forging and annealing. Materialwissenschaft und Werkstofftechnik.DOI
Ning Guo, Shuchang Li, Fafa Yan, Zhen Wang, Kemin Xue, Rou Wang, Wenfang Xing (2022). The Deformation Characteristics and Effect of Processing Parameters on the Microstructure of 7075 Al Shell Part Manufactured by Rotating Backward Extrusion. Metals.DOI
Kemin Xue, Jinliang Zhou, Si-liang Yan, Ping Li (2022). Flow diversion mechanisms and control methodology in asymmetric spinning of special-shaped multi-wedge belt pulley. The International Journal of Advanced Manufacturing Technology.DOI
Lusheng Wang, Ping Li, Jiren Dai, Kemin Xue (2022). Synergistic Strengthening and Plasticizing of Reduced Activation Ferritic/Martensitic Steel Processed by Sequential Extrusion-Twist-Extrusion. Journal of Materials Engineering and Performance.DOI
Kemin Xue, Yashan Guo, Jianfeng Shi, Xuefeng Wei, Ping Li (2021). The brittle-to-ductile transition of pure tungsten processed by closed dual equal channel angular pressing process. Materials Science and Engineering A.DOI
Ping Li, Lusheng Wang, Bin Wang, Siliang Yan, Miao Meng, Xiaohu Ji, Kemin Xue (2021). Diffusion and mechanical properties of Ti2AlNb and TA15 interface: From experiments to molecular dynamics. Vacuum.DOI
H.Q. Duan, H.M. Zhang, Xingwang Cheng, Pengwan Chen, Xiaonan Mu, Kemin Xue, Yufeng Zhou (2021). Achieving homogeneous dispersion of GNPs in Ti-based nanocomposites via high-pressure torsion. Materials Letters.DOI
M. Meng, Siliang Yan, Xiaoguang Fan, Kemin Xue (2021). Modeling of quasi-trimodal microstructures formation in large-size Ti-alloy parts under near-isothermal local loading forming process. Journal of Materials Processing Technology.DOI
Ping Li, Juan-Juan Shu, Lu-Sheng Wang, Miao Meng, Kemin Xue (2021). The role of shear deformation in pure tungsten: Mechanical properties and micro-mechanism. International Journal of Modern Physics B.DOI
Kemin Xue, Yashan Guo, Yufeng Zhou, Bing Xu, Ping Li (2020). Thermal stability of the HPT-processed tungsten at 1250 – 1350 °C. International Journal of Refractory Metals and Hard Materials.DOI
Ping Li, Lusheng Wang, Siliang Yan, Miao Meng, Yufeng Zhou, Kemin Xue (2020). The role of non-equilibrium grain boundary in micro-deformation and failure mechanisms of Bicrystal structural tungsten. International Journal of Refractory Metals and Hard Materials.DOI
Kemin Xue, Biao Huang, Siliang Yan, Guangshan Wu, Ping Li (2020). Effect of Heterogeneous Lamellar Structure on Mechanical Properties and Electrochemical Corrosion Behavior of Al-Zn-Mg-Cu Alloy Subjected to High-Pressure Torsion. Journal of Materials Engineering and Performance.DOI
Kemin Xue, Zhe Wang, Xue Wang, Yufeng Zhou, Ping Li (2020). Nano-indentation nanohardness and elastic modulus evolution of molybdenum processed by high-pressure torsion. Materials Science and Technology.DOI
Ping Li, Ya‐Ling Hua, Siliang Yan, Yufeng Zhou, Xuefeng Wei, Kemin Xue (2020). Strengthening mechanisms of pure tungsten subjected to high pressure torsion: Deviation from classic Hall‐Petch relation. Materialwissenschaft und Werkstofftechnik.DOI
Kemin Xue, Wenchun Tian, Siliang Yan, Hanlin Li, Ping Li (2020). Variations in mechanical properties of RAFM steel under vacuum diffusion welding with pre-deformation and subsequent heat treatment. Fusion Engineering and Design.DOI
Xue Ke-min, Zhou Yufeng, Wenchun Tian, Ping Li (2020). Texture evolution and deformation - induced amorphization in high pressure torsion of W. Materials Today Communications.DOI
Ping Li, Lusheng Wang, Siliang Yan, Miao Meng, Kemin Xue (2019). Temperature effect on the diffusion welding process and mechanism of B2–O interface in the Ti2AlNb-based alloy:A molecular dynamics simulation. Vacuum.DOI
Ping Li, G.S. Wu, Siliang Yan, Jun Long Zhou, Kemin Xue, Wenchao Shi (2019). Improve stress corrosion cracking resistance and mechanical properties of Al‐Zn‐Mg‐Cu‐Zr alloy with heterogeneous lamellae structure produced by high pressure torsion. Materialwissenschaft und Werkstofftechnik.DOI
Kemin Xue, Chao Wu, Weizheng Yang, Guangxu Dai, Ping Li, Si-liang Yan (2019). Study on Rotary Bending Forming Process of Torsional Damper Shell Pulley. Xibei Gongye Daxue Xuebao/Journal of Northwestern Polytechnical University.DOI
Ping Li, Tao Wu, Juan-Juan Shu, Yufeng Zhou, Xue Wang, Kemin Xue (2019). Phase transformation of pure tungsten subjected to multi-directional compression. International Journal of Refractory Metals and Hard Materials.DOI
Kemin Xue, Bo‐Xiao‐Tian Wang, Siliang Yan, Dong‐Qing Bo, Ping Li (2019). Strain‐Induced Dissolution and Precipitation of Secondary Phases and Synergetic Stengthening Mechanisms of Al–Zn–Mg–Cu Alloy during ECAP. Advanced Engineering Materials.DOI
Kemin Xue, Ning Guo, Kuanxin Liu, Shunqi Zheng (2019). A systemic study on hydroforming process of exhaust pipe by FE simulation and experiment. International Journal of Materials and Product Technology.DOI
Kemin Xue, Weizheng Yang, Si-liang Yan, Ping Li (2018). Forming defect control and optimization of multi-step spinning thickening process considering the variation of spinning gap. The International Journal of Advanced Manufacturing Technology.DOI
Ping Li, Xiankun Ji, Kemin Xue (2018). Correlation between the thermal responses and microstructure patterns in aluminum‐based silicon carbide composites (SiCp/Al) consolidated by different high pressure torsion schemes. Materialwissenschaft und Werkstofftechnik.DOI
Feng Ying Xu, Dongmei Gong, Ke Chen, Kemin Xue, Ping Li (2018). Isothermal Forming of Aluminum Alloy Control Arm. IOP Conference Series Materials Science and Engineering.DOI
Kemin Xue, Mei Liu, Siliang Yan, Zhe Wang, Ya‐Ling Hua, Ping Li (2018). Synergic Improvement of Plasticity and Strength of Al–Zn–Mg–Cu Alloy by Grain Refinement and Precipitates Redistribution using Cyclic Extrusion Compression. Advanced Engineering Materials.DOI
Ping Li, Dazhi Sun, Xue Wang, Kemin Xue, Rui Hua, Yucheng Wu (2018). Microstructure and thermal stability of sintered pure tungsten processed by multiple direction compression. Transactions of Nonferrous Metals Society of China.DOI
Ping Li, Quan Lin, Xue Wang, Ye Tian, Kemin Xue (2018). Recrystallization behavior of pure molybdenum powder processed by high-pressure torsion. International Journal of Refractory Metals and Hard Materials.DOI
Xue Wang, Ping Li, Kemin Xue (2018). Strain effect on grain refinement and thermal stability of ultrafine-grained molybdenum processed by severe plastic deformation. Procedia Manufacturing.DOI
Si-liang Yan, Hongwei Li, Ping Li, Kemin Xue (2018). Mechanisms and forming rules of large thin-walled aluminum alloy components in electromagnetic incremental forming. Procedia Manufacturing.DOI
Ping Li, Xiaohu Ji, Kemin Xue (2017). Diffusion Bonding of TA15 and Ti2AlNb Alloys: Interfacial Microstructure and Mechanical Properties. Journal of Materials Engineering and Performance.DOI
Liang Chen, Ping Li, Ye Tian, Lingfeng Li, Xue Ke-min, Meng Zhao (2016). Observations on the Ductility and Thermostability of Tungsten Processed from Micropowder by Improved High-pressure Torsion. 《稀有金属材料与工程》.DOI
Ping Li, Yong-gen Ding, Peng Peng Yao, Kemin Xue, Chengming Li (2016). Study on High-Temperature Flow Behavior and Substructure and Texture Evolution of TA15 Titanium Alloy. Journal of Materials Engineering and Performance.DOI
Hongli Liu, Ping Li, Kemin Xue, Chen‐Hao Qian, Rui Hua (2016). Microstructural evolution and fracture mechanism of a new Al–Zn–Mg–Cu–Zr alloy processed by equal‐channel angular pressing. Rare Metals.DOI
Ping Li, Xue Wang, Kemin Xue, Ye Tian, Yucheng Wu (2015). Microstructure and recrystallization behavior of pure W powder processed by high-pressure torsion. International Journal of Refractory Metals and Hard Materials.DOI
Xue Wang, Ping Li, Kemin Xue (2015). An Analysis on Microstructure and Grain Size of Molybdenum Powder Material Processed by Equal Channel Angular Pressing. Journal of Materials Engineering and Performance.DOI
Xiao-xi WANG, Min HE, Zhu Zhen, Kemin Xue, Ping Li (2015). Influence of twist extrusion process on consolidation of pure aluminum powder in tubes by equal channel angular pressing and torsion. Transactions of Nonferrous Metals Society of China.DOI
Chen-hao QIAN, Ping Li, Kemin Xue (2015). Interface, lattice strain and dislocation density of SiCp/Al composite consolidated by equal channel angular pressing and torsion. Transactions of Nonferrous Metals Society of China.DOI
Chen-hao QIAN, Ping Li, Kemin Xue (2015). Influence of deformation passes on interface of SiC p /Al composites consolidated by equal channel angular pressing and torsion. Transactions of Nonferrous Metals Society of China.DOI
Chen-hao Qian, Ping Li, Kemin Xue (2014). Thermal Properties of SiCp/Al Composites Consolidated by Equal Channel Angular Pressing and Torsion. Journal of Materials Engineering and Performance.DOI
Ping Li, Kemin Xue, Xiaoxi Wang, Chen-hao QIAN (2014). Refinement and consolidation of pure Al particles by equal channel angular pressing and torsion. Transactions of Nonferrous Metals Society of China.DOI
Ping Li, Baoguo Yuan, Kemin Xue, Jiang Zheng (2014). Microstructure and properties of hydrogenated TB8 alloy. Rare Metals.DOI
Xue Ke-min (2013). Multi-scale study of pure molybdenum powder material in tubes during equal channel angular pressing. Materials Science and Engineering of Powder Metallurgy.
Xue Ke-min (2013). Study on Softening Behavior of TB8 Titanium Alloy during Double-rolling Hot Deformation. Rare Metals and Cemented Carbides.
Xue Ke-min (2013). Precise extrusion process of waveguide component for radar use. Suxing gongcheng xuebao.
Xue Ke-min (2013). Mechanical Behavior and Microstructure of TA15 Titanium Alloy during Hot Compressive Deformation. Hangkong cailiao xuebao.
Xue Ke-min (2013). EFFECT OF VOLUME FRACTION ON TENSILE PROPERTIES OF SiCp/Al ALLOY COMPOSITES BY HIGH-PRESSURE TORSION. Powder Metallurgy Industry.
Ping Li, Xiang Zhang, Kemin Xue, Xiao Li (2012). Effect of equal channel angular pressing and torsion on SiC-particle distribution of SiCp–Al composites. Transactions of Nonferrous Metals Society of China.DOI
Xue Ke-min (2012). Effect of hydrogenation on room temperature compression properties of TB8 titanium alloy. Suxing gongcheng xuebao.
Xue Ke-min (2012). Numerical Simulation on the Roll-forging and Die-forging of Aluminum Alloy Control Arms. Journal of Netshape Forming Engineering.
Xue Ke-min (2012). Numerical Simulation of Die Casting Technology on Aluminium Alloy and Its Analysis. Journal of Netshape Forming Engineering.
Xue Ke-min (2012). The Numerical Simulation and Experimental Study of Cold Closed Die Forging Process of Planetary Gear. Journal of Netshape Forming Engineering.
Xue Ke-min (2012). Simulation Study on Ring Rolling of Inside Groove Rings. Journal of Netshape Forming Engineering.
Xue Ke-min (2012). Simulation of Local Cold Forging for Spur Gear. Rejiagong gongyi.
Jun Hua Huang, Zhirui Wang, Kemin Xue (2011). Cyclic deformation response and micromechanisms of Ti alloy Ti–5Al–5V–5Mo–3Cr–0.5Fe. Materials Science and Engineering A.DOI
Xue Ke-min (2011). Effect of hot deformation parameters on microstructure of TA15 alloy and phase transformation kinetics. Journal of Functional Biomaterials.
Xue Ke-min (2011). Research on Forging and Demoulding of the Helical Gear. Journal of Netshape Forming Engineering.
Xue Ke-min (2011). Fractal feature of recrystallized structure of TB8 alloy. Materials Research and Application.
Xue Ke-min (2011). Effects of key parameters on copper powder cones processed by high-pressure torsion. Materials Science and Technology.
Xue Ke-min (2010). Numerical Simulating of the Stamping Forming Process of Auto Left-front Door's Anti-collision Beam. Journal of Netshape Forming Engineering.
Xue Ke-min (2010). A Study on Forging and Demoulding of the Helical Gear. Journal of Netshape Forming Engineering.
Xue Ke-min (2010). Cold-close Precision Forging of Half Axle Bevel Gear with Big Modulus Based on Divided Flow Method. Journal of Netshape Forming Engineering.
Xue Ke-min (2010). Model of constitutive relationship for TB8 alloy based on BP neural network. Duanya jishu.
Xue Ke-min (2010). Study of Stamping Process of Door Inner Made of Tailor-welded Blanks. Journal of Netshape Forming Engineering.
Ping Li, Xue Ke-min, Zhou Meng-Zhi (2009). Microstructure and properties evolution and mechanism analysis of sintered aluminum powder during equal channel angular expression. Cailiao yanjiu xuebao.
Xue Ke-min (2009). Fractal on hot deformed microstructure of Ti-15-3 alloy. The Chinese Journal of Nonferrous Metals.
Xue Ke-min (2009). Material properties improvement of molybdenum powder sintered body by forging process. Journal of Zhejiang University of Science and Technology.
Shuyong Jiang, Zhengyi Ren, Chunfeng Li, Kemin Xue (2008). Role of ball size in backward ball spinning of thin-walled tubular part with longitudinal inner ribs. Journal of Materials Processing Technology.DOI
Xue Ke-min (2008). FE numerical simulation of automobile hub spinning forming process. Journal of Hefei University of Technology.
Xue Ke-min (2008). Application of ANN in the drawbead design of automobile panel. Journal of Hefei University of Technology.
Yuanpei Duan, Ping Li, Kemin Xue, Qing Zhang, Xiao-xi WANG (2007). Flow behavior and microstructure evolution of TB8 alloy during hot deformation process. Transactions of Nonferrous Metals Society of China.DOI
Shuyong Jiang, Zhengyi Ren, Kemin Xue, Chunfeng Li (2007). Application of BPANN for prediction of backward ball spinning of thin-walled tubular part with longitudinal inner ribs. Journal of Materials Processing Technology.DOI
Xue Ke-min (2007). Fractal analysis of recrystallized grains of Ti-15-3 alloy after hot deformation. The Chinese Journal of Nonferrous Metals.
Xue Ke-min (2007). The Development of Isothermal Forging of Titanium Alloy at Home and Abroad. Wanxi Xueyuan xuebao.
Xue Ke-min (2007). Study on Die-casting Filling Process for T-type Copper Alloy Piece. Rejiagong gongyi.
Jiang Shuyong, Xue Ke-min, Chunfeng Li, Ren Zhengyi (2006). Spinning deformation criteria of thin-walled tubular part with longitudinal inner ribs. Journal of Wuhan University of Technology-Mater Sci Ed.DOI
Xue Ke-min (2006). Study on the high temperature deformation mechanism of Ti-15-3 alloy. Journal of Hefei University of Technology.
Xue Ke-min (2006). Optimization of hot deformation process for titanium based on artificial intelligence. The Chinese Journal of Nonferrous Metals.
Xue Ke-min (2006). The Research Development of Semi-solid Blank Production.
Xue Ke-min (2006). Effect of pouring temperatures on the microstructure of the semi-solid AlSi_9Mg alloy. Journal of Hefei University of Technology.
Xue Ke-min (2005). Coupled thermo-mechanical FEM analysis of the sintered powder during upsetting process. Suxing gongcheng xuebao.
Xue Ke-min (2005). Study on Refining of Semisolid Al-alloy by Ti-B. Rejiagong gongyi.
Xue Ke-min (2005). 3D elasto-plastic FEM simulation of precise extrusion process of the box-shaped work piece. Journal of Hefei University of Technology.
Shuyong Jiang, Ping Li, Kemin Xue (2004). Application of BPANN in spinning deformation of thin-walled tubular parts with longitudinal inner ribs. Journal of Central South University of Technology.DOI
Yecheng Liu, Kemin Xue, Yuan Liu, Jia-jie Zhao, Junjia Lian, P Q Li (2026). Multi-directional Extrusion and Coordinated Heat Treatment Regime: Dominant Mechanisms Governing Microstructural Response, Secondary Phase Precipitation, and Mechanical Behavior in N36 Zirconium Alloy. SSRN Electronic Journal.DOI
Ao Zhang, Ping Li, Yecheng Liu, Jiajie Zhao, Yuan Liu, Kemin Xue (2025). Effect of Annealing Method on Microstructure and Properties of Deformed N36 Zr-Alloy. SSRN Electronic Journal.DOI
Zilong Liu, Junyuan Zhang, Siliang Yan, Kemin Xue, Ping Li, Miao Meng (2025). Precipitation behavior of T1 phase and strengthening mechanism in X2A66 aluminum-lithium alloy via tailored aging treatments. SSRN Electronic Journal.DOI
Jian Zheng Song, Ding Yonggen, Kemin Xue, Dong Feng, qin qiang (2024). The Effect of High-Pressure Torsion Process on the Microstructure and Mechanical Properties of Al-Zn-Mg-Cu Alloy. SSRN Electronic Journal.DOI
Ping Li, Kemin Xue, Qinghang Hu, Wenchun Tian, Jiren Dai (2023). Comprehensive Improvement of Strength and Ductility in Rafm Steel Subjected to Twist Extrusion an Upsetting Cooperate with Tempering. SSRN Electronic Journal.DOI
Xiaoli Zhang, Si-liang Yan, Kemin Xue, Ping Li, Xiaogang Fang, Yashan Guo (2023). Spatio-Temporal Distribution Characteristics of Coupled Field and Formation Mechanisms of Forming Defects in Electrically-Assisted Press Bending of Ti2alnb-Based Alloy Stiffened Panel. SSRN Electronic Journal.DOI