易朋兴｜华中科技大学｜学者主页

2025

基于深度学习的齿轮箱设备故障智能诊断方法研究

黄俊杰，易朋兴，王桢

《计算机与数字工程》

2025

用于电磁超声检测信号的联合降噪方法

杨斌，易朋兴，郝峥旭

《应用声学》

2025

A defect recognition method based on ITLPP and multi-feature fusion matrix

Biting Lei, Pengxing Yi

Scientific Reports

DOI

2024

A novel data augmentation framework for remaining useful life estimation with dense convolutional regression network

Jie Shang, Danyang Xu, Haobo Qiu, Liang Gao, Chen Jiang, Pengxing Yi

Journal Of Manufacturing Systems，Vol. 740

DOI

2024

基于电磁超声的小样本铝板表面缺陷检测方法

杨斌，易朋兴，郝峥旭

《电子测量技术》

2024

基于改进FCM算法的舰船备件分类方法研究

王桢，黄俊杰，易朋兴

《火力与指挥控制》

2024

基于改进TOPSIS方法的舰船维修级别判定方法研究

李方正，刘坤，王桢，王浩，易朋兴

《火力与指挥控制》

2023

多人协同舰船维修任务分配研究

杜度，李阳，李方正，易朋兴，黄俊杰

《机电工程技术》

2022

基于分层任务网络的舰船维修任务分解方法

李方正，李阳，易朋兴，王浩，黄俊杰

《装备制造技术》

2022

Research on Simulation Method of Ship Equipment maintenance Support process

Lei Li, Pengxing Yi, Zhen Wang, Kun Liu, Fangzheng Li

2022 2nd International Conference on Algorithms, High Performance Computing and Artificial Intelligence (AHPCAI)

DOI

2021

虚拟装配中基于层次包围盒的空间快速验证

方舟，易朋兴，杜玉娇，李阳

《中国舰船研究》

DOI

2021

Research on fuzzy comprehensive evaluation method of vessel equipment maintainability

Yuefeng Du, Ming-yu Li, Yang Li, X. Shen, Pengxing Yi

International Conference on Graphic and Image Processing

DOI

2021

A SVD-Based Signal De-Noising Method With Fitting Threshold for EMAT

Biting Lei, Pengxing Yi, Jiayun Xiang, Wei Xu

IEEE Access

DOI

2021

A New Defect Classification Approach Based on the Fusion Matrix of Multi-Eigenvalue

Biting Lei, Pengxing Yi, Jiayun Xiang

IEEE Sensors Journal

DOI

2021

Disassembly modeling in ship maintenance with consideration of the influence of fasteners

Hua Zhang, Minhao Mu, Zhou Fang, Yue Qiu, Pengxing Yi

International Conference on Graphic and Image Processing

DOI

2021

Improvement of maintenance visibility analysis method based on the cone of human visual field

Ming-yu Li, Minhao Mu, Zhou Fang, Chunhua He, Pengxing Yi

International Conference on Graphic and Image Processing

DOI

2020

基于视野锥的维修可视性分析方法改进

何春华，方舟，李阳，易朋兴

《中国舰船研究》

2020

Fast Verification of Space Based on Hierarchical Bounding Boxes in Virtual Assembly

Yaxu Bai, Ming-yu Li, Zhou Fang, Yang Li, Hui Li, Pengxing Yi

2020 5th International Conference on Mechanical, Control and Computer Engineering (ICMCCE)

DOI

2020

Research on Key Technologies of Quantitative Evaluation of Ergonomics for Equipment Maintenance

Minhao Mu, Ming-yu Li, Pengxing Yi, Yang Li, Bao-He Li, Zhou Fang

2020 5th International Conference on Mechanical, Control and Computer Engineering (ICMCCE)

DOI

2019

基于稀疏网格模型与MOGA算法的起重机主梁结构优化

梁其传，易朋兴，邱悦

《现代制造工程》

DOI

2019

桥式起重机主梁自适应多目标动态优化

邱悦，易朋兴，聂福全，马德杨

《机械设计与制造》

DOI

2019

A novel transfer learning method for robust fault diagnosis of rotating machines under variable working conditions

Weiwei Qian, Shun-Ming Li, Pengxing Yi, Kaicheng Zhang

Measurement

DOI

2019

Inventory management for a remanufacture-to-order production with multi-components (parts)

Fei Zhang, Z. Guan, Li Zhang, Yanyan Cui, Pengxing Yi, Saif Ullah

Journal of Intelligent Manufacturing

DOI

2018

基于迭代经验小波变换的齿轮故障诊断方法

辛玉，李舜酩，王金瑞，易朋兴，刘颉

《仪器仪表学报》

DOI

2018

桥式起重机主梁静挠度有限元分析的约束条件

易朋兴，马德扬，聂福全，梁其传，邱悦

《中国工程机械学报》

2018

基于改进Floyd算法的转向机拆卸序列研究

刘玉娟，易朋兴，胡玖坤，罗璐琴

《机电工程》

2018

A modal interval based method for dynamic decision model considering uncertain quality of used products in remanufacturing

Min Huang, Pengxing Yi, Tie-Lin Shi, Lijun Guo

Journal of Intelligent Manufacturing

DOI

2018

A Temperature Drift Compensation Method for Pulsed Eddy Current Technology

Biting Lei, Pengxing Yi, Ya-Hui Li, Jiayun Xiang

Italian National Conference on Sensors

DOI

2016

Dual recycling channel decision in retailer oriented closed-loop supply chain for construction machinery remanufacturing

Pengxing Yi, Min Huang, Lijun Guo, Tie-Lin Shi

DOI

2016

Numerical analysis and experimental investigation of modal properties for the gearbox in wind turbine

Pengxing Yi, Peng Huang, Tie-Lin Shi

Frontiers of Mechanical Engineering

DOI

2016

A Modal Interval Based Genetic Algorithm for Closed-loop Supply Chain Network Design under Uncertainty

Min Huang, Pengxing Yi, Lijun Guo, Tie-Lin Shi

DOI

2016

A retailer oriented closed-loop supply chain network design for end of life construction machinery remanufacturing

Pengxing Yi, Min Huang, Lijun Guo, Tie-Lin Shi

DOI

2016

風力タービンにおけるギアボックスのためのモード特性の数値解析と実験的研究【Powered by NICT】

Pengxing Yi, Peng Huang, Tie-Lin Shi

2015

Finite Element Modal Analysis of Four-link Combination Portal Crane

Yong-Feng Zheng, You-Min Hu, Bo Wu, Pengxing Yi, Jie Liu

International Congress of Mathematicans

DOI

2015

Multi-dimensional Reverse Channel Decision under Different Collection Strategies

Min Huang, Pengxing Yi, Lijun Guo, Tie-Lin Shi

DOI

2015

A New Method to Evaluate Surface Defects with an Electromagnetic Acoustic Transducer

Kang Zhang, Pengxing Yi, Ya-Hui Li, Bing Hui, Xu-Ming Zhang

Italian National Conference on Sensors

DOI

2015

Dynamic modeling and analysis of load sharing characteristics of wind turbine gearbox

Pengxing Yi, Cheng Zhang, Lijun Guo, Tie-Lin Shi

DOI

2014

不同误差下风电齿轮箱均载与太阳轮轨迹关系研究

易朋兴，张成，黄鹏

《装备制造技术》

2014

Numerical investigation of the lift-off effect on the cut-off frequency in the Rayleigh wave

Kang Zhang, Pengxing Yi, Ya-Hui Li, Xu-Ming Zhang, Zailin Guan

Proceedings of the 16th International Conference on Mechatronics - Mechatronika 2014

DOI

2014

Influence of the Lift-Off Effect on the Cut-Off Frequency of the EMAT-Generated Rayleigh Wave Signal

Pengxing Yi, Kang Zhang, Ya-Hui Li, Xu-Ming Zhang

Italian National Conference on Sensors

DOI

2014

Multi-objective genetic algorithms based structural optimization and experimental investigation of the planet carrier in wind turbine gearbox

Pengxing Yi, Lijian Dong, Tie-Lin Shi

Frontiers of Mechanical Engineering

DOI

2013

An improved discrete particle swarm optimization algorithm for high-speed trains assembly sequence planning

Ming-Yu Li, Bo Wu, Pengxing Yi, Chao-Ren Jin, Youmin Hu, Tie-Lin Shi

DOI

2013

The study of multi-dimensional reverse channels for construction machinery remanufacturing

Min Huang, Pengxing Yi, Tie-Lin Shi, Kang Zhang, Lijun Guo

IEEE International Symposium on Assembly and Manufacturing

DOI

2008

Reliability Analysis of Condition Monitoring Systems under Fuzzy Environment

Pengxing Yi, Shiyuan Liu, Yunzhu Hu, Weiming Liu

Advanced materials research

DOI

2006

分布式监测系统可靠性贝叶斯评估

易朋兴，刘世元，杜润生，杨叔子

《华中科技大学学报(自然科学版)》

2006

System Reliability Analysis of Redundant Condition Monitoring Systems

Pengxing Yi

2005

DISTRIBUTED MONITORING SYSTEM RELIABILITY ESTIMATION WITH CONSIDERATION OF STATISTICAL UNCERTAINTY

Pengxing Yi

DOI

2005

STUDY ON MARKOV MODEL BASED RELIABILITY FOR DISTRIBUTED MONITORING SYSTEM

Pengxing Yi

DOI

精选作品

期刊论文

基于深度学习的齿轮箱设备故障智能诊断方法研究

用于电磁超声检测信号的联合降噪方法

A defect recognition method based on ITLPP and multi-feature fusion matrix

A novel data augmentation framework for remaining useful life estimation with dense convolutional regression network

基于电磁超声的小样本铝板表面缺陷检测方法

基于改进FCM算法的舰船备件分类方法研究

基于改进TOPSIS方法的舰船维修级别判定方法研究

多人协同舰船维修任务分配研究

基于分层任务网络的舰船维修任务分解方法

Research on Simulation Method of Ship Equipment maintenance Support process

虚拟装配中基于层次包围盒的空间快速验证

Research on fuzzy comprehensive evaluation method of vessel equipment maintainability

A SVD-Based Signal De-Noising Method With Fitting Threshold for EMAT

A New Defect Classification Approach Based on the Fusion Matrix of Multi-Eigenvalue

Disassembly modeling in ship maintenance with consideration of the influence of fasteners

Improvement of maintenance visibility analysis method based on the cone of human visual field

基于视野锥的维修可视性分析方法改进

Fast Verification of Space Based on Hierarchical Bounding Boxes in Virtual Assembly

Research on Key Technologies of Quantitative Evaluation of Ergonomics for Equipment Maintenance

基于稀疏网格模型与MOGA算法的起重机主梁结构优化

桥式起重机主梁自适应多目标动态优化

A novel transfer learning method for robust fault diagnosis of rotating machines under variable working conditions

Inventory management for a remanufacture-to-order production with multi-components (parts)

基于迭代经验小波变换的齿轮故障诊断方法

桥式起重机主梁静挠度有限元分析的约束条件

基于改进Floyd算法的转向机拆卸序列研究

A modal interval based method for dynamic decision model considering uncertain quality of used products in remanufacturing

A Temperature Drift Compensation Method for Pulsed Eddy Current Technology

Dual recycling channel decision in retailer oriented closed-loop supply chain for construction machinery remanufacturing

Numerical analysis and experimental investigation of modal properties for the gearbox in wind turbine

A Modal Interval Based Genetic Algorithm for Closed-loop Supply Chain Network Design under Uncertainty

A retailer oriented closed-loop supply chain network design for end of life construction machinery remanufacturing

風力タービンにおけるギアボックスのためのモード特性の数値解析と実験的研究【Powered by NICT】

Finite Element Modal Analysis of Four-link Combination Portal Crane

Multi-dimensional Reverse Channel Decision under Different Collection Strategies

A New Method to Evaluate Surface Defects with an Electromagnetic Acoustic Transducer

Dynamic modeling and analysis of load sharing characteristics of wind turbine gearbox

不同误差下风电齿轮箱均载与太阳轮轨迹关系研究

Numerical investigation of the lift-off effect on the cut-off frequency in the Rayleigh wave

Influence of the Lift-Off Effect on the Cut-Off Frequency of the EMAT-Generated Rayleigh Wave Signal

Multi-objective genetic algorithms based structural optimization and experimental investigation of the planet carrier in wind turbine gearbox

An improved discrete particle swarm optimization algorithm for high-speed trains assembly sequence planning

The study of multi-dimensional reverse channels for construction machinery remanufacturing

Reliability Analysis of Condition Monitoring Systems under Fuzzy Environment

分布式监测系统可靠性贝叶斯评估

System Reliability Analysis of Redundant Condition Monitoring Systems

DISTRIBUTED MONITORING SYSTEM RELIABILITY ESTIMATION WITH CONSIDERATION OF STATISTICAL UNCERTAINTY

STUDY ON MARKOV MODEL BASED RELIABILITY FOR DISTRIBUTED MONITORING SYSTEM

研究方向