汪馗｜中南大学｜学者主页

2026

Influence of printing angle on mechanical anisotropy and failure of FDM-fabricated polyamide composites

Yi-Sen Liu, Yang-Dong Guo, Kui Wang, V. Shim

Thin-walled structures

DOI

2026

3D printed continuous carbon fiber reinforced polymer composites with adjustable self-monitoring properties based on layup design

Depeng Wang, Yangyu Huang, Ping Cheng, Huijing Gao, Yong Peng, Kui Wang

Structural Health Monitoring

DOI

2026

Tailoring the crashworthiness of functionally graded annular cutting structures

Wanying Zhu, Yangyu Huang, Benhuai Li, Chong Shi, Yong Peng, Kui Wang

Thin-Walled Structures

DOI

2026

A CUF-Based Data-Driven Simulation Framework for Static Analysis of Fiber-Reinforced Composite Profile Structures

Yanchuan Hui, Yushui Miao, Yutong Liu, Qun Huang, Wei Huang, Kui Wang, Depeng Wang, Xiao Liu, Peng Niu, Zhaohui Liu, Huicui Li, Fengcheng Sun, Xi Wang

Buildings

DOI

2026

3D-printed composite thin-walled tubes for energy absorption and multifunctionality: State of the art and prospects

Qianbing Tan, Kui Wang

Composite Structures

DOI

2026

Three Dimensional Printed Continuous Fiber‐Reinforced Foamed Composite Expansion Tubes With Radial Density Gradients for Enhanced Energy Absorption

Yangyu Huang, Xinru Li, Wanying Zhu, Yanni Rao, Kui Wang

Polymers for Advanced Technologies

DOI

2026

Local folding control via geometric tailoring for enhanced crashworthiness of bio-inspired multi-cell tubes

Kui Wang, Junyu Lu, Yisen Liu, Qianbing Tan, Huijing Gao, Ping Hu, Yanni Rao, Yong Peng

Aerospace Science and Technology

DOI

2026

Compressive responses and reusability of 3D-printed continuous ramie fiber-reinforced composite honeycombs

Kui Wang, Yangyu Huang, Jingdong Wang, Peiyu Han, Yong Peng, V.E. Yudin, С. А. Патлажан, Xiaodong Song

European Journal of Mechanics - A/Solids

DOI

2026

A Multiple-Criteria Evaluation Model and Decision-Making Algorithm for 3D-Printed Continuous-Carbon-Fiber-Reinforced Composites Under Different Heat Treatment Conditions

Honghao Zhang, Shaolin Zhang, Wanying Zhu, Kui Wang, Yong Peng, Lingyu Wang

Symmetry

DOI

2026

Multiscale modeling of 3D-printed continuous fiber-reinforced composites considering fiber bundle shape variability

Jiangyang Xiang, Yisen Liu, Yanni Rao, Yong Peng, Kui Wang

Composites Part B Engineering

DOI

2026

A novel printing path node elevation strategy for uniform Joule heating in 3D-printed continuous carbon fiber grids

Jinge Li, Depeng Wang, Yangyu Huang, Guangyu Dong, Yanni Rao, Yong Peng, J.P.M. Correia, S. Ahzi, Kui Wang

Journal of Manufacturing Processes

DOI

2026

Bio-inspired embedded lattice structures for synergistic load-bearing and energy absorption: Design, mechanical characterization, and multi-objective optimization

Guoquan Xie, Xiaobo Luo, Tao Li, Yisen Liu, Honghao Zhang, Yong Peng, Kui Wang

Composite Structures

DOI

2026

Energy absorption characteristics of 3D printed continuous fiber-reinforced foamed composite expansion tubes with rotational-transition printing path

Yangyu Huang, Xinru Li, Wanying Zhu, Yanni Rao, Chong Shi, Benhuai Li, Thomas Ochuku Mbuya, Kui Wang

Composites Communications

DOI

2026

Enhancing temperature adaptability and repeatable functionality of shape-memory corrugated structures via adding continuous Kevlar fibers

Guangyu Sun, Jin Wang, Jin Wang, Qianbing Tan, Cheng Peng, Yong Peng, Mostafa Baghani, Majid Baniassadi, Kui Wang

Composites Part B Engineering

DOI

2026

Crashworthiness analysis and multi-objective optimization of an annular cutting-type energy-absorbing structure for high-speed trains

Wanying Zhu, Tao Li, Xingtao Liao, Yaxian Wu, Yong Peng, Kui Wang

Engineering Structures

DOI

2026

Quasi-static compression behaviour of additively manufactured continuous carbon/glass fibre hybrid composites: Effects of hybrid ratio and stacking sequence

Mingzhu Guan, Bing Yang, Jinghan Yan, Haoxu Ding, Dongdong Chen, Kui Wang, Shoune Xiao

Composites Part A Applied Science and Manufacturing

DOI

2026

Effects of stacking sequence and strain rate on flexural performance and energy absorption capability of continuous carbon fiber‐reinforced polymers via fused filament fabrication

Yiyun Wu, Kui Wang, Yinbo Peng, Victor Neto, Robertt A. Fontes Valente, Shixian Li

Polymer International

DOI

2025

列车-驼鹿碰撞安全评估分析方法

田洪雷，于洋洋，赵士忠，王新禹，廖兴涛，汪馗，易深根，彭勇

《交通运输工程学报》

2025

Optimizing the mechanical properties and print accuracy of 3D printed lightweighting continuous fibre reinforced polylactic acid foams

Kui Wang, Xinru Li, Ping Cheng, Donghua Zhao, Yi Xiong, Wei Wen, Yong Long Peng, S. Ahzi

Transportation Safety and Environment

DOI

2025

Hydrothermal aging induced interfacial degradation behavior of 3D printed continuous glass fiber composites

Kui Wang, Gejin Zhao, Ying Chen, Bing Yang, Yong Long Peng, Yanni Rao

Composites Science and Technology

DOI

2025

Electrothermal performance of 3D printed continuous carbon fiber reinforced structures with different geometric configurations

Yanni Rao, Jinge Li, Depeng Wang, Depeng Wang, Yuxuan Liu, Yangyu Huang, Guangyu Dong, J.P.M. Correia, Kui Wang

Composite Structures

DOI

2025

Compressive deformation modes and properties of 3D printed continuous fiber reinforced composite auxetic honeycomb structures regulated by structural parameters

Depeng Wang, Depeng Wang, Yanlu Chang, Ping Cheng, Yanni Rao, Yong Peng, Kui Wang

Structures

DOI

2025

High Fiber Content 3D Printed Dry Continuous Carbon Fiber Reinforce Composites Based on Coaxial Dual‐Aperture Nozzle

Depeng Wang, Jiangyang Xiang, Yangyu Huang, Yanni Rao, Yong Long Peng, Kui Wang

Advanced Materials Technologies

DOI

2025

Dynamic Behavior of Fused Filament Fabricated Continuous Ramie Fiber‐Reinforced Polypropylene Composites under Diverse Loading Conditions

Hao Lin, Ruijun Cai, Jiangyang Xiang, Yisen Liu, Yangyu Huang, Yanni Rao, Yong Long Peng, Kui Wang, S. Ahzi

Advanced Engineering Materials

DOI

2025

Assembled suture multi-cell structures with enhanced interlocking and tailored energy absorption

Huijing Gao, Yisen Liu, Qianbing Tan, Yanni Rao, Yong Long Peng, Kui Wang

Composite Structures

DOI

2025

Multilevel woven-like cell size effect on mechanical behavior of 3D printed continuous ramie fiber reinforced biocomposites

Ping Cheng, Hao Lin, Kui Wang, S. Ahzi, Yong Long Peng

Engineering Failure Analysis

DOI

2025

Additive Manufacturing of Fibre-Reinforced Polymer Composites

Chengxing Yang, Kui Wang, Jianxun Zhang, A. Codolini

Polymers

DOI

2025

3D printed continuous fiber-reinforced composites with high fiber bundle shape uniformity, mechanical performance consistency, and fiber content

Jiangyang Xiang, Hao Lin, Depeng Wang, Depeng Wang, Yanni Rao, J.P.M. Correia, S. Ahzi, Yong Peng, Kui Wang

Composites Communications

DOI

2025

Crushing behaviors and optimization design of 3D printed rib-filled corrugated structures with shape-memory function

Guangyu Sun, Jin Wang, Jin Wang, Qianbing Tan, Cheng Peng, Jing Zhang, Song Yao, Yong Li Peng, Kui Wang

Engineering Structures

DOI

2025

Real-time self-monitoring properties in 3D printed continuous carbon fiber reinforced thin-walled composite structures under large deformation

Yangyu Huang, Depeng Wang, Depeng Wang, Wei Wen, Wanying Zhu, Jinge Li, Ping Cheng, Yong Peng, Tianjian Yu, Kui Wang, S. Ahzi

Composite Structures

DOI

2025

In-process density measurement for model-based process optimization of functionally graded foam microcellular structures in material extrusion additive manufacturing

Donghua Zhao, Zhaowei Zhou, Kaicheng Ruan, Xuguang Xu, Guoquan Zhang, Ziwen Chen, Kui Wang, Yi Xiong

Additive manufacturing

DOI

2025

A multi-scale model for interlayer fracture behavior of FDM-printed short fiber reinforced polymers

Yanni Rao, Xianli Yu, Ning Wei, Song Yao, Kui Wang

Mechanics of Advanced Materials and Structures

DOI

2025

Analysis of the tensile mechanical performance of the adhesive and rivet hybrid connection in carbon fiber reinforced composite rail vehicles

Yong Long Peng, Jiajie Yin, Xin Wang, Xuanzhen Chen, Kui Wang, Zhiqiang Huang, Fang Wang, Honghao Zhang

Composites Communications

DOI

2025

Design and crashworthiness behaviors of novel 3D printed cutting-type energy-absorbing composite structures

Wanying Zhu, Yaxian Wu, Huijing Gao, Peiyu Han, Xingtao Liao, Yong Long Peng, J.P.M. Correia, S. Ahzi, Kui Wang

Mechanics of Advanced Materials and Structures

DOI

2025

Printing path induced temperature history and interfacial properties of 3D printed continuous nature fiber reinforced polypropylene composites

Xiongbing Li, Yuxuan Liu, Shixian Li, Kui Wang, J.P.M. Correia, S. Ahzi

Journal of Manufacturing Processes

DOI

2025

Bioinspired staggered diaphragm design of multi-cell thin-walled structures for enhancing compressive performance

Qianbing Tan, Jin Wang, Jin Wang, Yisen Liu, Guangyu Sun, Huijing Gao, Yao Song, Song Yao, Kui Wang

Composites Science and Technology

DOI

2025

Crashworthy Performance of Sustainable Filled Structures Using Recycled Beverage Cans and Eco-Friendly Multi-Cell Fillers

Huijing Gao, Jiangyang Xiang, Junyu Lu, Qianbing Tan, Frédéric Addiego, Yong Long Peng, Kui Wang

Polymers

DOI

2025

Simulation analysis and optimization of 3D printed continuous carbon fiber reinforced composites

Wanying Zhu, Shixian Li, Hongmei Long, Shaoqi Dong, Kui Wang, Yong Long Peng

Composite Structures

DOI

2025

Effect of reinforcements and crosslink density on Poly (methyl methacrylate) based nano-rubbers: friction, toughness and impact resistance

Rodrigue Matadi Boumbimba, Ange‐Therese Akono, A.Y.E. Kouassi, Kui Wang

Journal of Polymer Research

DOI

2025

Crashworthiness Design of Composite Thin-Walled Structures Manufactured by Additive Manufacturing

Kui Wang, Qianbing Tan, Yisen Liu

International Conference on Computational & Experimental Engineering and Sciences

DOI

2025

Improved Self-Locking Multi-Cell Structures with Customizable Energy Absorption

Huijing Gao, Yisen Liu, Qianbing Tan, Kui Wang

International Conference on Computational & Experimental Engineering and Sciences

DOI

2024

Effects of PLA-Type and Reinforcement Content on the Mechanical Behavior of Additively Manufactured Continuous Ramie Fiber-Filled Biocomposites

Kui Wang, Yanlu Chang, Ping Cheng, Wei Wen, Yong Peng, Yanni Rao, Said Ahzi

Sustainability，Vol. 16, No. 7

DOI

2024

Finite element analysis and multi-stage cooperative optimization of the expansion-tearing energy absorption structure

Lu Wang, Benhuai Li, Tao Li, Wanying Zhu, Song Yao, Kui Wang, Yong Long Peng

Mechanics of Advanced Materials and Structures

DOI

2024

Effects of undulating printing paths on axial compressive behaviors of 3D-printed continuous fiber-reinforced multi-cell thin-walled structure

Jiangyang Xiang, Jin Wang, Jin Wang, Yisen Liu, Huijing Gao, Qianbing Tan, Kui Wang, Yong Long Peng

Engineering Structures

DOI

2024

Crashworthiness analysis of splitting-expanding structures made from magnesium alloy

Benhuai Li, Lu Wang, Wanying Zhu, Tao Li, Kui Wang, Yong Long Peng

Materials Today Communications

DOI

2024

Influence of continuous ramie yarn content on printability and mechanical properties of in situ impregnation 3D printed biocomposites

Kui Wang, Yanlu Chang, Ping Cheng, Yanni Rao, Yong Long Peng, S. Ahzi

Polymer Composites

DOI

2024

A behavior three-way decision approach under interval-valued triangular fuzzy numbers with application to the selection of additive manufacturing composites

Guoquan Xie, Wanying Zhu, Jiangyang Xiang, Tao Li, Xuan Wu, Yong Long Peng, Honghao Zhang, Kui Wang

Engineering Applications of Artificial Intelligence

DOI

2024

On multi-stage deformation and gradual energy absorption of 3D printed multi-cell tubes with varying cross-section

Yisen Liu, Jin Wang, Qianbing Tan, Huijing Gao, Kui Wang, Song Yao, Yong Long Peng

Engineering Structures

DOI

2024

Effects of the printing parameters on geometric accuracy and mechanical properties of digital light processing printed polymer

Ruijun Cai, Xiaobo Luo, Guoquan Xie, Kui Wang, Yong Long Peng, Yanni Rao

Journal of Materials Science

DOI

2024

Investigating gradient temperature control for enhanced interfacial bonding behavior in material extrusion 3D printing continuous fiber reinforced polymer composites

Shixian Li, Kui Wang, J.P.M. Correia, Yuxuan Liu, S. Ahzi

European Journal of Mechanics - A/Solids

DOI

2024

High–speed train crash safety assessment for Train–moose collisions

Yong Long Peng, Zhengsheng Hu, Min Deng, Kui Wang, Yangyang Yu, Quanwei Che, Gongxun Deng

Proceedings of the Institution of Mechanical Engineers Part F Journal of Rail and Rapid Transit

DOI

2024

Shape recovery and energy absorption properties of 3D printed continuous ramie fiber reinforced thin‐walled biocomposite structures

Hao Lin, Ruijun Cai, Ping Cheng, Jin Wang, Yanni Rao, Yong Long Peng, Kui Wang, S. Ahzi, Song Yao

Polymer Composites

DOI

2024

Numerical simulation of the effect of projectile shape and size on the high-velocity impact of carbon fiber reinforced composite laminates

Yong Long Peng, Xin Wang, Xuanzhen Chen, Kui Wang, Zhiqiang Huang, Zhixiang Liu, Honghao Zhang

Journal of Materials Research and Technology

DOI

2024

Novel application of dual-nozzle 3D printer for enhanced in-situ impregnation 3D printing of dry continuous fiber reinforced composites

Kui Wang, Yangyu Huang, Ping Cheng, Yi Xiong, Antoine Le Duigou, Yong Long Peng, Yanni Rao, S. Ahzi

Composites Part A Applied Science and Manufacturing

DOI

2024

Validated numerical unrestrained occupant-seat crash scenarios for high-speed trains integrating experimental, computational, and inverse methods

Gongxun Deng, Tuo Xu, Yong Long Peng, Dayan Sun, Zhengsheng Hu, Min Deng, Kui Wang, Ciaran Knut Simms

Traffic Injury Prevention

DOI

2024

Remanufacturing and mechanical property restoration of post-used polypropylene-based composites based on in-situ impregnated 3D printing

Jiangyang Xiang, Hao Lin, Zejun Zhang, Ruijun Cai, Ping Cheng, Baoli Gong, Kui Wang, Yong Long Peng

Sustainable materials and technologies

DOI

2024

A low-cost granular-medium hot quasi-isostatic pressing method for enhancing compressive properties of 3D printed structures

Kui Wang, Qianbing Tan, Jin Wang, Yisen Liu, Zhanyu Zhai, Song Yao, Yong Long Peng

Journal of Manufacturing Processes

DOI

2024

Developing a multiscale approach for damage analysis of functionalized-GNP/PET nanocomposite

Mohammad Safaei, D. Pourbandari, M. R. Karimi, Mostafa Baghani, Karen Abrinia, Kui Wang, Majid Baniassadi

Journal of Materials Science

DOI

2024

An analytical study on low velocity impact resistance behaviors of general bio‐inspired helicoidal composite plates

Yanni Rao, Tao Xiong, Song Yao, Han Zhao, Kui Wang

Polymer Composites

DOI

2024

Study on the low‐velocity impact response of the repaired carbon fiber‐reinforced plastic laminates: Bonded versus scarf repair

Xuanzhen Chen, Yong Long Peng, Kui Wang, Xin Wang, Zhixiang Liu, Zhiqiang Huang, Honghao Zhang

Polymer Composites

DOI

2024

Modular assembly for multicell structures with designable energy absorption characteristics

Kui Wang, Huijing Gao, Jin Wang, Depeng Wang, Wei Wen, Yong Long Peng, Tianjian Yu

Mechanics of Advanced Materials and Structures

DOI

2024

Exploring Anisotropic Mechanical Characteristics in 3D-Printed Polymer Biocomposites Filled with Waste Vegetal Fibers

Honggang Wang, Zhiqiang Fu, Yu Liu, Ping Cheng, Kui Wang, Yong Long Peng

Symmetry

DOI

2024

Assessment of High-Speed Train Interactions with Containment Walls in Post-derailment Collisions

Gongxun Deng, Yong Long Peng, Benhuai Li, Kui Wang, Ciaran Knut Simms

Mechanisms and machine science

DOI

2024

Multi-Objective Optimization of Aluminum Alloy Electric Bus Frame Connectors for Enhanced Durability

Wenjun Zhou, Mingzhi Yang, Qian Peng, Yong Long Peng, Kui Wang, Qiang Xiao

Computer Modeling in Engineering & Sciences

DOI

2024

The Staggered Design of Multi-Diaphragm in Thin-Walled Structures for Improving Compressive Performance

Qianbing Tan, Jin Wang, Yisen Liu, Guangyu Sun, Huijing Gao, Yong Li Peng, Yao Song, Kui Wang

International Conference on Computational & Experimental Engineering and Sciences

DOI

2024

Development and Validation of Moose Numerical Models for Vehicle Crash Safety Assessments

Yong Long Peng, Zhengsheng Hu, Gongxun Deng, Kui Wang, Quanwei Che, Yangyang Yu

Mechanisms and machine science

DOI

2023

Study on the Cell Magnification Equivalent Method in Out-of-Plane Compression Simulations of Aluminum Honeycomb

Yuning Qiao, Yong Peng, Ping Cheng, Xuefei Zhou, Fang Wang, Fan Li, Kui Wang, Chao Yu, Honggang Wang

Sustainability，Vol. 15, No. 3

DOI

2023

3D/4D Printed Functional Continuous Fiber-reinforced Polymer Composites: Progress and Perspectives

P. Cheng, Shixian Li, Yong Peng, A. Le Duigou, Kui Wang, Said Ahzi

Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers

DOI

2023

Effect of continuous fiber orientations on quasi‐static indentation properties in 3D printed hybrid continuous carbon/Kevlar fiber reinforced composites

Wan-Ying Zhu, Shixian Li, Yong Peng, Kui Wang, S. Ahzi

Polymers for Advanced Technologies

DOI

2023

Correction to: Interfacial behaviors of continuous carbon fiber reinforced polymers manufactured by fused filament fabrication: A review and prospect

Yiyun Wu, Kui Wang, V. Neto, Yong Peng, R. Valente, S. Ahzi

International Journal of Material Forming

DOI

2023

Advances in hybrid fibers reinforced polymer-based composites prepared by FDM: A review on mechanical properties and prospects

Shixian Li, P. Cheng, S. Ahzi, Yong Peng, Kui Wang, F. Chinesta, J. P. Correia

Composites Communications

DOI

2023

Quasi-static penetration property of 3D printed woven-like ramie fiber reinforced biocomposites

P. Cheng, Yong Peng, Kui Wang, A. Le Duigou, Song Yao, Chaoming Chen

Composite structures

DOI

2023

A hierarchical analytical model for twisted yarn reinforced plant fiber composites considering dual-scale filler content, porosity and local aggregation effect

Y. Rao, Zi-Yun Chen, N. Wei, T. Xiong, Kui Wang

Composite structures

DOI

2023

Bio-inspired cellular thin-walled structures under impact loading: Modeling and multi-stage cooperative optimization algorithm

Yong Peng, Tao Li, Lin Hou, Kui Wang, Guo-Quan Xie, Hong-Hao Zhang

Mechanics of Advanced Materials and Structures

DOI

2023

Repeatable compressive functionality of 3D printed shape-memory thin-walled corrugated structures

Guangyu Sun, Jin Wang, Kui Wang, M. Baghani, Yong Peng, Y. Rao

International Journal of Mechanical Sciences

DOI

2023

A novel 3D printed continuous ramie fiber reinforced variable stiffness biocomposite honeycomb structure

P. Cheng, Kui Wang, Yong Peng, S. Ahzi, Fei-Peng Xu, Zhiqiang Huang

Vacuum

DOI

2023

A novel dual-nozzle 3D printing method for continuous fiber reinforced composite cellular structures

P. Cheng, Kui Wang, A. Le Duigou, Jiachen Liu, Zhixiang Liu, Yong Peng, S. Ahzi

Composites Communications

DOI

2023

Retraction notice to “Interfacial microstructure and properties between epoxy resin and novel organic hybrid graphene oxide modification ultra high molecular weight polyethylene fiber” [Polymer 197 (2020) 122472]

Xiang-Zhe Liu, Kui Wang

Polymer

DOI

2023

Analysis of moose motion trajectory after bullet train-moose collisions

Yong Peng, Min Deng, Y. Yu, Zhengsheng Hu, Kui Wang, Xin Wang, Shen-Gen Yi, Gong Deng

Engineering Failure Analysis

DOI

2023

A hybrid multi-stage decision-making method with probabilistic interval-valued hesitant fuzzy set for 3D printed composite material selection

Guo-Quan Xie, Kui Wang, Xuan Wu, Jin Wang, Tao Li, Yong Peng, Hong-Hao Zhang

Engineering applications of artificial intelligence

DOI

2023

Corrigendum to “The crack propagation and dynamic impact responses of tempered laminated glass used in high-speed trains” [Eng. Fail. Anal. 134 (2022) 106024]

Shiming Wang, Yong Peng, Xuanzhen Chen, Kui Wang

Engineering Failure Analysis

DOI

2023

Reversible energy absorbing behaviors of shape-memory thin-walled structures

Kui Wang, Guangyu Sun, Jin Wang, Song Yao, M. Baghani, Yong Peng

Engineering structures

DOI

2023

Frequency‐dependent dynamic moduli prediction for general bio‐inspired staggered platelet reinforced composites

Y. Rao, Wei Wan, N. Wei, Kui Wang

Polymer Composites

DOI

2023

Effects of loading rate and temperature on crushing behaviors of 3D printed multi-cell composite tubes

Yi-Sen Liu, Jin Wang, R. Cai, Jiangyang Xiang, Kui Wang, Song Yao, Yong Peng

Thin-walled structures

DOI

2023

Improving the mechanical properties of 3D printed recycled polypropylene‐based composites through adjusting printing temperature

Kui Wang, Ze-Jun Zhang, R. Cai, Guangyu Sun, P. Cheng, Yong Peng

Journal of Applied Polymer Science

DOI

2023

Interlaminar and translaminar fracture toughness of 3D ‐printed continuous fiber reinforced composites: A review and prospect

Jiangyang Xiang, Ping Cheng, Kui Wang, Yaxian Wu, Yanni Rao, Yong Long Peng

Polymer Composites

DOI

2023

A multiscale study of heat treatment effects on the interlayer mechanical properties of 3D printed continuous carbon fiber‐reinforced composites

Wanying Zhu, Shixian Li, Hongmei Long, Kui Wang, Yanni Rao, Yong Long Peng, S. Ahzi

Polymer Composites

DOI

2023

Effects of cellular crossing paths on mechanical properties of 3D printed continuous fiber reinforced biocomposite honeycomb structures

Ping Cheng, Kui Wang, Yong Long Peng, S. Ahzi

Composites Part A Applied Science and Manufacturing

DOI

2023

Experimental study on crashworthiness and lightweight of cutting-type energy-absorbing structure of magnesium alloy for trains

Tao Li, Yong Long Peng, Yuning Qiao, Wanying Zhu, Jing Zhang, Kui Wang, Guoquan Xie, Honghao Zhang

Engineering Structures

DOI

2023

Geometric Accuracy and Energy Absorption Characteristics of 3D Printed Continuous Ramie Fiber Reinforced Thin-Walled Composite Structures

Kui Wang, Hao Lin, Antoine Le Duigou, Ruijun Cai, Yangyu Huang, Ping Cheng, Honghao Zhang, Yong Long Peng

Chinese Journal of Mechanical Engineering

DOI

2023

Experimental and simulation study on bonded repaired low-velocity impact of carbon fiber reinforced plastic laminates for rail vehicles

Xuanzhen Chen, Yong Long Peng, Kui Wang, Xin Wang, Zhixiang Liu, Zhiqiang Huang, Honghao Zhang

Journal of Materials Research and Technology

DOI

2023

3D printing continuous natural fiber reinforced polymer composites: A review

Ping Cheng, Yong Long Peng, Kui Wang, Antoine Le Duigou, S. Ahzi

Polymers for Advanced Technologies

DOI

2023

Study on High-Velocity Impact Perforation Performance of CFRP Laminates for Rail Vehicles: Experiment and Simulation

Xuanzhen Chen, Yong Long Peng, Kui Wang, Xin Wang, Zhixiang Liu, Zhiqiang Huang, Honghao Zhang

Biomimetics

DOI

2023

Path Planning and Bending Behaviors of 3D Printed Continuous Carbon Fiber Reinforced Polymer Honeycomb Structures

Kui Wang, Depeng Wang, Yisen Liu, Huijing Gao, Chengxing Yang, Yong Long Peng

Polymers

DOI

2023

Controlling the Water Diffusion Inside Smart 4D‐Printed HBC by Functional Channels

Thomas Fruleux, David Correa, Mickaël Castro, Simon Poppinga, Kui Wang, Antoine Le Duigou

Advanced Functional Materials

DOI

2023

Electrical resistance-based self-monitoring of manufacturing damage in 3D printed continuous carbon fiber reinforced composites

Ping Cheng, Zezhen Ye, Yangyu Huang, Depeng Wang, Depeng Wang, Yong Peng, Kui Wang, S. Ahzi

Composites Communications

DOI

2023

Integrated design and additive manufacturing of lattice-filled multi-cell tubes

Yisen Liu, Qianbing Tan, Hao Lin, Jin Wang, Kui Wang, Yong Long Peng, Song Yao

Composites Science and Technology

DOI

2023

Novel modified triply periodic minimal surfaces (MTPMS) developed using genetic algorithm

Saeed Khaleghi, Mostafa Baghani, Morad Karimpour, Masoud Shariat-Panahi, Kui Wang, Majid Baniassadi

Journal of Materials Research and Technology

DOI

2022

3D printed continuous fiber reinforced composite lightweight structures: A review and outlook

P. Cheng, Yong Peng, Shixian Li, Y. Rao, A. Le Duigou, Kui Wang, S. Ahzi

Composites Part B: Engineering

DOI

2022

Interfacial behaviors of continuous carbon fiber reinforced polymers manufactured by fused filament fabrication: A review and prospect

Yiyun Wu, Kui Wang, V. Neto, Yong Peng, R. Valente, S. Ahzi

International Journal of Material Forming

DOI

2022

Compressive property and shape memory effect of 3D printed continuous ramie fiber reinforced biocomposite corrugated structures

P. Cheng, Kui Wang, Xuanzhen Chen, A. Le Duigou, Yong Peng, W. Wen

Smart materials and structures (Print)

DOI

2022

Contributions of interfaces on the mechanical behavior of 3D printed continuous fiber reinforced composites

Shixian Li, Kui Wang, Wan-Ying Zhu, Yong Peng, S. Ahzi, F. Chinesta

Construction and Building Materials

DOI

2022

On crashworthiness behaviors of 3D printed multi-cell filled thin-walled structures

Kui Wang, Yi-Sen Liu, Jin Wang, Jiangyang Xiang, Song Yao, Yong Peng

Engineering structures

DOI

2022

On impact behaviors of 3D concave structures with negative Poisson’s ratio

Jin Wang, Xiao-Bo Luo, Kui Wang, Song Yao, Yong Peng

Composite structures

DOI

2022

Investigation on dynamic strength of 3D ‐printed continuous ramie fiber reinforced biocomposites at various strain rates using machine learning methods

R. Cai, Hao Lin, P. Cheng, Ze-Jun Zhang, Kui Wang, Yong Peng, Yuankai Wu, S. Ahzi

Polymer Composites

DOI

2022

An integrated prediction model for processing related yield strength of extrusion-based additive manufactured polymers

N. Wei, Song Yao, Y. Rao, Kui Wang, Yong Peng

Mechanics of Advanced Materials and Structures

DOI

2022

Investigations of quasi‐static indentation properties of 3D printed polyamide/continuous Kevlar/continuous carbon fiber composites

Kui Wang, Wan-Ying Zhu, Shixian Li, Yong Peng, S. Ahzi

Journal of Applied Polymer Science

DOI

2022

Crashworthiness behavior of thin-walled bioinspired structures in the coconut palm

Estephany Reyes, N. Marín, Kui Wang

2022 8th International Engineering, Sciences and Technology Conference (IESTEC)

DOI

2022

Materials selection of 3D printed polyamide-based composites at different strain rates: A case study of automobile front bumpers

Kui Wang, Guo-Quan Xie, Jiangyang Xiang, Tao Li, Yong Peng, Jin Wang, Hong-Hao Zhang

Journal of Manufacturing Processes

DOI

2022

Progressive collapse behaviors and mechanisms of 3D printed thin-walled composite structures under multi-conditional loading

Jin Wang, Yi-Sen Liu, Kui Wang, Song Yao, Yong Peng, Y. Rao, S. Ahzi

Thin-walled structures

DOI

2022

Investigation on the mechanical properties of 3D printed hybrid continuous fiber-filled composite considering influence of interfaces

Shixian Li, Kui Wang, Wan-Ying Zhu, Yong Peng, S. Ahzi, F. Chinesta

The International Journal of Advanced Manufacturing Technology

DOI

2022

The crack propagation and dynamic impact responses of tempered laminated glass used in high-speed trains

Shiming Wang, Yong Peng, Xuanzhen Chen, Kui Wang

Engineering Failure Analysis

DOI

2022

A hybrid MCDM-based optimization method for cutting-type energy-absorbing structures of subway vehicles

Yong Peng, Jia-Hao Zhou, Lin Hou, Kui Wang, Chaoming Chen, Hong-Hao Zhang

Structural And Multidisciplinary Optimization

DOI

2022

A heat‐press‐treatment method for 3D printed thin‐walled composite structures with improved interfacial and compressive properties

Jin Wang, Qian-Bing Tan, Kui Wang, Song Yao, Yong Peng, Y. Rao

Polymer Composites

DOI

2022

Tailoring interfacial properties of 3D-printed continuous natural fiber reinforced polypropylene composites through parameter optimization using machine learning methods

R. Cai, W. Wen, Kui Wang, Yong Peng, S. Ahzi, F. Chinesta

Materials Today Communications

DOI

2022

Effects of printing direction on quasi‐static and dynamic compressive behavior of 3D printed short fiber reinforced polyamide‐based composites

Kui Wang, Jiangyang Xiang, Jin Wang, Guo-Quan Xie, Yi-Sen Liu, Yong Peng, Y. Rao, Rodrigue Matadi Boumbimba

Polymers for Advanced Technologies

DOI

2022

Application of machine learning methods on dynamic strength analysis for additive manufactured polypropylene-based composites

R. Cai, Kui Wang, Wei Wen, Yong Peng, M. Baniassadi, S. Ahzi

Polymer testing

DOI

2022

Effect of heat‐treatment on compressive response of 3D printed continuous carbon fiber reinforced composites under different loading directions

Jiangyang Xiang, Yi-Sen Liu, Jin Wang, Kui Wang, Yong Peng, Y. Rao, Rodrigue Matadi Boumbimba

Journal of Applied Polymer Science

DOI

2022

Geometric limitations of 3D printed continuous flax-fiber reinforced biocomposites cellular lattice structures

Thomas Fruleux, Mickaël Castro, David Correa, Kui Wang, Ryosuke Matsuzaki, Antoine Le Duigou

Composites Part C Open Access

DOI

2022

Shape memory performance of PETG 4D printed parts under compression in cold, warm, and hot programming

Elyas Soleyman, Davood Rahmatabadi, Kianoosh Soltanmohammadi, Mohammad Aberoumand, Ismaeil Ghasemi, Karen Abrinia, Majid Baniassadi, Kui Wang, Mostafa Baghani

Smart Materials and Structures

DOI

2022

Diseño bioinspirado en la palma de coco de Panamá para estructuras de absorción de energía

Nacarí Marín, Estephany Reyes, Kui Wang, Noé A. Serrano

I+D Tecnológico

DOI

2021

On the directional elastic modulus of the TPMS structures and a novel hybridization method to control anisotropy

Saeedeh Khaleghi, Fayyaz Nosouhi Dehnavi, M. Baghani, Masoud Safdari, Kui Wang, M. Baniassadi

DOI

2021

Interfacial and mechanical properties of continuous ramie fiber reinforced biocomposites fabricated by in-situ impregnated 3D printing

C. Ping, Kui Wang, Xuanzhen Chen, Jin Wang, Yong Peng, S. Ahzi, Chaoming Chen

DOI

2021

A hierarchical prediction scheme for effective properties of fuzzy fiber reinforced composites with two-scale interphases: Based on three-phase bridging model

Y. Rao, Jing Ban, Song Yao, Kui Wang, N. Wei, Yue Lu, S. Ahzi

DOI

2021

Compressive behaviors of 3D printed polypropylene-based composites at low and high strain rates

Kui Wang, R. Cai, Ze Zhang, Jin-Long Liu, S. Ahzi, Yong Peng, Y. Rao

Polymer testing

DOI

2021

Study on intralaminar crack propagation mechanisms in single- and multi-layer 2D woven composite laminate

P. Cheng, Yong Peng, Kui Wang, Yi-Qi Wang, Chaoming Chen

Mechanics of Advanced Materials and Structures

DOI

2021

The effect of loading rate on the interfacial behavior of overmolded hybrid fiber reinforced polypropylene composites

L. Fu, Bing-Yan Jiang, Yudong Ding, Kui Wang, Zhan-Yu Zhai

Journal of Applied Polymer Science

DOI

2021

Mechanical properties improvement of shape memory polymers by designing the microstructure of multi-phase heterogeneous materials

Mohamad Mahdi Rafiee, M. Baniassadi, Kui Wang, M. Baniasadi, M. Baghani

DOI

2021

Heat-treatment effects on dimensional stability and mechanical properties of 3D printed continuous carbon fiber-reinforced composites

Kui Wang, H. Long, Ying Chen, M. Baniassadi, Y. Rao, Yong Peng

Composites. Part A, Applied science and manufacturing

DOI

2021

Mechanical performance and damage behavior of delaminated composite laminates subject to different modes of loading

P. Cheng, Yong Peng, Kui Wang, Yi-Qi Wang

Journal of the Brazilian Society of Mechanical Sciences and Engineering

DOI

2021

Hygrothermal aging effects on the mechanical properties of 3D printed composites with different stacking sequence of continuous glass fiber layers

Kui Wang, Ying Chen, H. Long, M. Baghani, Y. Rao, Yong Peng

Polymer testing

DOI

2021

A process-structure-performance modeling for thermoplastic polymers via material extrusion additive manufacturing

Y. Rao, N. Wei, Song Yao, Kui Wang, Yong Peng

DOI

2021

New insights into the synergistic influence of voids and interphase characteristics on effective properties of unidirectional composites

Kui Wang, Yue Lu, Y. Rao, N. Wei, Jing Ban, Yong Peng, Song Yao, S. Ahzi

DOI

2021

Simultaneous reinforcement of both rigidity and energy absorption of polyamide-based composites with hybrid continuous fibers by 3D printing

Kui Wang, Shixian Li, Yiyun Wu, Y. Rao, Yong Peng

Composite structures

DOI

2021

Investigation of the Ballistic Performance of GFRP Laminate under 150 m/s High-Velocity Impact: Simulation and Experiment

Feng-Qiang Chen, Yong Peng, Xuanzhen Chen, Kui Wang, Zhixiang Liu, Chaoming Chen

Polymers

DOI

2020

Developing a beam formulation for semi-crystalline two-way shape memory polymers

M. Maleki-Bigdeli, M. Baniassadi, Kui Wang, M. Baghani

DOI

2020

Large deformation of hyperelastic thick-walled vessels under combined extension-torsion-pressure: analytical solution and FEM

M. Shojaeifard, Kui Wang, M. Baghani

Mechanics based design of structures and machines

DOI

2020

Computational modeling of degradation process on the mechanical performance of Poly-lactic acid /Magnesium composite

Armin Shahmohmmadi, M. Baghani, Masoud Shariat Panahi, Kui Wang, Ehsan Hasanpur, M. Baniassadi

Proceedings of the Institution of mechanical engineers. Part L, journal of materials

DOI

2020

Modeling the mechanical response of polymers and nano‐filled polymers: Effects of porosity and fillers content

Reema H. Alasfar, S. Ahzi, Kui Wang, N. Barth

DOI

2020

Numerical investigation of smart auxetic three-dimensional meta-structures based on shape memory polymers via topology optimization

Ehsan Jebellat, M. Baniassadi, Alireza Moshki, Kui Wang, M. Baghani

DOI

2020

Effects of Scanning Strategy and Printing Temperature on the Compressive Behaviors of 3D Printed Polyamide-Based Composites

Jin Wang, Jiangyang Xiang, Hao Lin, Kui Wang, Song Yao, Yong Peng, Y. Rao

Polymers

DOI

2020

Materials selection of 3D-printed continuous carbon fiber reinforced composites considering multiple criteria

Hong-Hao Zhang, Yiyun Wu, Kui Wang, Yong Peng, Danqi Wang, Song Yao, Jin Wang

DOI

2020

Interfacial microstructure and properties between epoxy resin and novel organic hybrid graphene oxide modification ultra high molecular weight polyethylene fiber

Xiang-Zhe Liu, Kui Wang

Polymer

DOI

2020

Effects of infill characteristics and strain rate on the deformation and failure properties of additively manufactured polyamide-based composite structures

Kui Wang, Xun Xie, Jin Wang, An-Dong Zhao, Yong Peng, Y. Rao

DOI

2020

Tailorable rigidity and energy-absorption capability of 3D printed continuous carbon fiber reinforced polyamide composites

Yong Peng, Yiyun Wu, Shixian Li, Kui Wang, Song Yao, Zhixiang Liu, H. Garmestani

DOI

2019

Synergistic reinforcement of polyamide-based composites by combination of short and continuous carbon fibers via fused filament fabrication

Yong Peng, Yiyun Wu, Kui Wang, G. Gao, S. Ahzi

Composite structures

DOI

2019

Constitutive Modeling of the Tensile Behavior of Recycled Polypropylene-Based Composites

Kui Wang, Yong Peng, Rodrigue Matadi Boumbimba, N. Bahlouli, D. Pessey, S. Ahzi, F. Addiego, Y. Rémond

Materials

DOI

2019

Investigation of the fracture behaviors of windshield laminated glass used in high-speed trains

Yong Peng, Wen Ma, Shiming Wang, Kui Wang, G. Gao

Composite structures

DOI

2019

Flexure Behaviors of ABS-Based Composites Containing Carbon and Kevlar Fibers by Material Extrusion 3D Printing

Kui Wang, Shixian Li, Y. Rao, Yiyun Wu, Yong Peng, Song Yao, Hong-Hao Zhang, S. Ahzi

Polymers

DOI

2018

Experimental and Numerical Investigations of Fracture Response on High-Speed Train Windshield under Impact Loading

Wen Ma, Yong Peng, Zhixiang Li, Kui Wang

2018

Investigation of the impact response of PMMA-based nano-rubbers under various temperatures

Rodrigue Matadi Boumbimba, M. Coulibaly, Yong Long Peng, Komi Espoir N'souglo, Kui Wang, P. Gerard

Journal of Polymer Research

DOI

2017

Investigation of the Impact Response of PMMA-Based Nano-rubbers Over a Large Range of Temperatures and Strain Rates

Rodrigue Matadi Boumbimba, M. Coulibaly, Kui Wang

Data-Driven Modeling for Sustainable Engineering

DOI

2017

Renewable biocomposites based on cellulose fibers and dimer fatty acid polyamide: Experiments and modeling of the stress-strain behavior

R. M. Boumbimba, Kui Wang, E. Hablot, N. Bahlouli, S. Ahzi, L. Avérous

DOI

2017

Investigation of the impact response of PMMA based nano-rubber over a large range of temperatures and strain rates

Rodrigue Matadi Boumbimba, Mamadou Tidiane Coulibaly, Kui Wang

HAL (Le Centre pour la Communication Scientifique Directe)

2016

Specimen Geometry Effect on the Deformation Mechanisms of Polypropylene-Based Composites Under Impact Loading at Different Temperatures

Kui Wang, Nadia Bahlouli, R. M. Boumbimba, Frédéric Addiego, Yves Rémond

Journal of Dynamic Behavior of Materials

DOI

2016

Quasistatic to dynamic behavior of particulate composites for different temperatures

N. Bahlouli, Kui Wang, R. M. Boumbimba, C. Wagner-Kocher, S. Ahzi

DOI

2016

Elastic and yield behaviors of recycled polypropylene-based composites: Experimental and modeling study

Kui Wang, N. Bahlouli, F. Addiego, S. Ahzi

DOI

2016

Modelling of the compressive high strain rate behaviour of biocomposite: application to dimer fatty acid-based polyamides with cellulose fibres

Rodrigue Matadi Boumbimba, Marie Reulier, Elodie Hablot, Kui Wang, Nadia Bahlouli, S. Ahzi, Luc Avérous

HAL (Le Centre pour la Communication Scientifique Directe)

2015

Dynamic mechanical characterization and modelling of polypropylene based organoclay nanocomposite

Kui Wang, R. M. Boumbimba, N. Bahlouli, S. Ahzi, R. Muller

DOI

2015

Strain-induced deformation mechanisms of polylactide plasticized with acrylated poly(ethylene glycol) obtained by reactive extrusion

Kui Wang, Berit Brüster, F. Addiego, Georgio Kfoury, Fatima Hassouna, D. Ruch, Jean-Marie Raquez, P. Dubois

DOI

2015

Time-resolved small-angle X-ray scattering study of void fraction evolution in high-density polyethylene during stress unloading and strain recovery

F. Addiego, S. Patlazhan, Kui Wang, S. Andre, S. Bernstorff, D. Ruch

DOI

2015

Sensibilité à la vitesse des composites particulaires à base de polypropylène

Nadia Bahlouli, Kui Wang, Rodrigue Matadi Boumbimba, Frédéric Addiego, S. Ahzi

Revue des composites et des matériaux avancés

DOI

2014

Impact response of recycled polypropylene-based composites under a wide range of temperature: Effect of filler content and recycling

Kui Wang, F. Addiego, N. Bahlouli, S. Ahzi, Y. Rémond, V. Toniazzo

DOI

2014

Dynamic behavior and flame retardancy of HDPE/hemp short fiber composites: Effect of coupling agent and fiber loading

Kui Wang, F. Addiego, A. Laachachi, B. Kaouache, N. Bahlouli, V. Toniazzo, D. Ruch

DOI

2013

Micromechanical modeling of the elastic behavior of polypropylene based organoclay nanocomposites under a wide range of temperatures and strain rates/frequencies

Kui Wang, S. Ahzi, R. M. Boumbimba, N. Bahlouli, F. Addiego, Y. Rémond

DOI

2013

Characterization and modeling of the thermomechanical behavior of polypropylene-based composites : effect of recycling and filler content

Kui Wang

DOI

2013

Effect of talc content on the degradation of re-extruded polypropylene/talc composites

Kui Wang, N. Bahlouli, F. Addiego, S. Ahzi, Y. Rémond, D. Ruch, R. Muller

DOI

2012

Experimental investigation and micromechanical modeling of high strain rate compressive yield stress of a melt mixing polypropylene organoclay nanocomposites

R. M. Boumbimba, Kui Wang, N. Bahlouli, S. Ahzi, Y. Rémond, F. Addiego

DOI

2012

Analysis of thermomechanical reprocessing effects on polypropylene/ethylene octene copolymer blends

Kui Wang, F. Addiego, N. Bahlouli, S. Ahzi, Y. Rémond, V. Toniazzo, R. Muller

DOI

2012

Dynamic Compressive Behavior of a Melt Mixed Polypropylene/Organoclay Nanocomposites

Kui Wang, R. M. Boumbimba, N. Bahlouli, S. Ahzi, R. Muller, M. Bouquey

DOI

2011

DYNAMIC BEHAVIOR OF VIRGIN AND RECYCLED PP/EPR AND PP/EPDM/TALC MATERIALS FOR CAR BUMPERS

Nadia Bahlouli, Y. R�mond, Kui Wang, Rodrigue Matadi Boumbimba, S. Ahzi

HAL (Le Centre pour la Communication Scientifique Directe)

DOI

2010

Polypropylene based organoclay nanocomposites: stiffness and yield stress predictions

Kui Wang, Rodrigue Matadi Boumbimba, Nadia Bahlouli, S. Ahzi, Yves Rémond, Michel Bouquey, René Müller

HAL (Le Centre pour la Communication Scientifique Directe)

精选作品

期刊论文

Influence of printing angle on mechanical anisotropy and failure of FDM-fabricated polyamide composites

3D printed continuous carbon fiber reinforced polymer composites with adjustable self-monitoring properties based on layup design

Tailoring the crashworthiness of functionally graded annular cutting structures

A CUF-Based Data-Driven Simulation Framework for Static Analysis of Fiber-Reinforced Composite Profile Structures

3D-printed composite thin-walled tubes for energy absorption and multifunctionality: State of the art and prospects

Three Dimensional Printed Continuous Fiber‐Reinforced Foamed Composite Expansion Tubes With Radial Density Gradients for Enhanced Energy Absorption

Local folding control via geometric tailoring for enhanced crashworthiness of bio-inspired multi-cell tubes

Compressive responses and reusability of 3D-printed continuous ramie fiber-reinforced composite honeycombs

A Multiple-Criteria Evaluation Model and Decision-Making Algorithm for 3D-Printed Continuous-Carbon-Fiber-Reinforced Composites Under Different Heat Treatment Conditions

Multiscale modeling of 3D-printed continuous fiber-reinforced composites considering fiber bundle shape variability

A novel printing path node elevation strategy for uniform Joule heating in 3D-printed continuous carbon fiber grids

Bio-inspired embedded lattice structures for synergistic load-bearing and energy absorption: Design, mechanical characterization, and multi-objective optimization

Energy absorption characteristics of 3D printed continuous fiber-reinforced foamed composite expansion tubes with rotational-transition printing path

Enhancing temperature adaptability and repeatable functionality of shape-memory corrugated structures via adding continuous Kevlar fibers

Crashworthiness analysis and multi-objective optimization of an annular cutting-type energy-absorbing structure for high-speed trains

Quasi-static compression behaviour of additively manufactured continuous carbon/glass fibre hybrid composites: Effects of hybrid ratio and stacking sequence

Effects of stacking sequence and strain rate on flexural performance and energy absorption capability of continuous carbon fiber‐reinforced polymers via fused filament fabrication

列车-驼鹿碰撞安全评估分析方法

Optimizing the mechanical properties and print accuracy of 3D printed lightweighting continuous fibre reinforced polylactic acid foams

Hydrothermal aging induced interfacial degradation behavior of 3D printed continuous glass fiber composites

Electrothermal performance of 3D printed continuous carbon fiber reinforced structures with different geometric configurations

Compressive deformation modes and properties of 3D printed continuous fiber reinforced composite auxetic honeycomb structures regulated by structural parameters

High Fiber Content 3D Printed Dry Continuous Carbon Fiber Reinforce Composites Based on Coaxial Dual‐Aperture Nozzle

Dynamic Behavior of Fused Filament Fabricated Continuous Ramie Fiber‐Reinforced Polypropylene Composites under Diverse Loading Conditions

Assembled suture multi-cell structures with enhanced interlocking and tailored energy absorption

Multilevel woven-like cell size effect on mechanical behavior of 3D printed continuous ramie fiber reinforced biocomposites

Additive Manufacturing of Fibre-Reinforced Polymer Composites

3D printed continuous fiber-reinforced composites with high fiber bundle shape uniformity, mechanical performance consistency, and fiber content

Crushing behaviors and optimization design of 3D printed rib-filled corrugated structures with shape-memory function

Real-time self-monitoring properties in 3D printed continuous carbon fiber reinforced thin-walled composite structures under large deformation

In-process density measurement for model-based process optimization of functionally graded foam microcellular structures in material extrusion additive manufacturing

A multi-scale model for interlayer fracture behavior of FDM-printed short fiber reinforced polymers

Analysis of the tensile mechanical performance of the adhesive and rivet hybrid connection in carbon fiber reinforced composite rail vehicles

Design and crashworthiness behaviors of novel 3D printed cutting-type energy-absorbing composite structures

Printing path induced temperature history and interfacial properties of 3D printed continuous nature fiber reinforced polypropylene composites

Bioinspired staggered diaphragm design of multi-cell thin-walled structures for enhancing compressive performance

Crashworthy Performance of Sustainable Filled Structures Using Recycled Beverage Cans and Eco-Friendly Multi-Cell Fillers

Simulation analysis and optimization of 3D printed continuous carbon fiber reinforced composites

Effect of reinforcements and crosslink density on Poly (methyl methacrylate) based nano-rubbers: friction, toughness and impact resistance

Crashworthiness Design of Composite Thin-Walled Structures Manufactured by Additive Manufacturing

Improved Self-Locking Multi-Cell Structures with Customizable Energy Absorption

Effects of PLA-Type and Reinforcement Content on the Mechanical Behavior of Additively Manufactured Continuous Ramie Fiber-Filled Biocomposites

Finite element analysis and multi-stage cooperative optimization of the expansion-tearing energy absorption structure

Effects of undulating printing paths on axial compressive behaviors of 3D-printed continuous fiber-reinforced multi-cell thin-walled structure

Crashworthiness analysis of splitting-expanding structures made from magnesium alloy

Influence of continuous ramie yarn content on printability and mechanical properties of in situ impregnation 3D printed biocomposites

A behavior three-way decision approach under interval-valued triangular fuzzy numbers with application to the selection of additive manufacturing composites

On multi-stage deformation and gradual energy absorption of 3D printed multi-cell tubes with varying cross-section

Effects of the printing parameters on geometric accuracy and mechanical properties of digital light processing printed polymer

Investigating gradient temperature control for enhanced interfacial bonding behavior in material extrusion 3D printing continuous fiber reinforced polymer composites

High–speed train crash safety assessment for Train–moose collisions

Shape recovery and energy absorption properties of 3D printed continuous ramie fiber reinforced thin‐walled biocomposite structures

Numerical simulation of the effect of projectile shape and size on the high-velocity impact of carbon fiber reinforced composite laminates

Novel application of dual-nozzle 3D printer for enhanced in-situ impregnation 3D printing of dry continuous fiber reinforced composites

Validated numerical unrestrained occupant-seat crash scenarios for high-speed trains integrating experimental, computational, and inverse methods

Remanufacturing and mechanical property restoration of post-used polypropylene-based composites based on in-situ impregnated 3D printing

A low-cost granular-medium hot quasi-isostatic pressing method for enhancing compressive properties of 3D printed structures

Developing a multiscale approach for damage analysis of functionalized-GNP/PET nanocomposite

An analytical study on low velocity impact resistance behaviors of general bio‐inspired helicoidal composite plates

Study on the low‐velocity impact response of the repaired carbon fiber‐reinforced plastic laminates: Bonded versus scarf repair

Modular assembly for multicell structures with designable energy absorption characteristics

Exploring Anisotropic Mechanical Characteristics in 3D-Printed Polymer Biocomposites Filled with Waste Vegetal Fibers

Assessment of High-Speed Train Interactions with Containment Walls in Post-derailment Collisions

Multi-Objective Optimization of Aluminum Alloy Electric Bus Frame Connectors for Enhanced Durability

The Staggered Design of Multi-Diaphragm in Thin-Walled Structures for Improving Compressive Performance

Development and Validation of Moose Numerical Models for Vehicle Crash Safety Assessments

Study on the Cell Magnification Equivalent Method in Out-of-Plane Compression Simulations of Aluminum Honeycomb

3D/4D Printed Functional Continuous Fiber-reinforced Polymer Composites: Progress and Perspectives

Effect of continuous fiber orientations on quasi‐static indentation properties in 3D printed hybrid continuous carbon/Kevlar fiber reinforced composites

Correction to: Interfacial behaviors of continuous carbon fiber reinforced polymers manufactured by fused filament fabrication: A review and prospect

Advances in hybrid fibers reinforced polymer-based composites prepared by FDM: A review on mechanical properties and prospects

Quasi-static penetration property of 3D printed woven-like ramie fiber reinforced biocomposites

A hierarchical analytical model for twisted yarn reinforced plant fiber composites considering dual-scale filler content, porosity and local aggregation effect

Bio-inspired cellular thin-walled structures under impact loading: Modeling and multi-stage cooperative optimization algorithm

Repeatable compressive functionality of 3D printed shape-memory thin-walled corrugated structures

A novel 3D printed continuous ramie fiber reinforced variable stiffness biocomposite honeycomb structure

A novel dual-nozzle 3D printing method for continuous fiber reinforced composite cellular structures

Retraction notice to “Interfacial microstructure and properties between epoxy resin and novel organic hybrid graphene oxide modification ultra high molecular weight polyethylene fiber” [Polymer 197 (2020) 122472]