王明海

期刊论文

1. 王明海，张闯，王启家（2026）. 舱段自动对接调姿机构的设计与研究. 《机械设计与研究》.
2. 陈香池，王明海，肖康，黄文涛（2026）. 基于ABAQUS变形控制的飞机蒙皮铣边柔性工装布局优化. 《机械设计与研究》.DOI
3. 陈铁日，王明海，孙英浒，王贵轩（2026）. 17% SiCp/Al复合材料激光加热辅助铣削性能研究. 《机械设计与研究》.DOI
4. Zhengqiang Li, Kang Xiao, Minghai Wang, Qijia Wang, Xuezhi Wang, Xianjun Kong, Siyu Zhou (2026). Experimental Investigation of Laser-Assisted Ultrasonic Vibration Milling of CF/PEEK-Based CFRTP Unidirectional Laminates. Micromachines.DOI
5. Ning Hou, Shunxiang Niu, Lidong Bai, Huang Shutao, Jinquan Li, Xuezhi Wang, Minghai Wang, Dehui Song (2026). Study on the stress field characteristics and laws of titanium alloy surface layer under the combined action of rotation and impact by finite element simulation. Journal of Mechanical Science and Technology.DOI
6. Xianjun Kong, Han Cui, Yaodi Wang, Xiaole Liu, Yaohui Zheng, Minghai Wang (2026). A Research on Fiber Removal Mechanism and its Effect on Damage Formation of CFRP Composites in Laser-Assisted Helical Milling. International Journal of Precision Engineering and Manufacturing.DOI
7. Yibo Yang, Cunke Niu, Zinan Ye, Ning Hou, Minghai Wang, Yuxin Zhang (2026). Investigation on the Different Characteristics of Subsurface Plastic Deformation Measured Between Parallel and Vertical Feed Direction during Milling TC4 Titanium Alloy. Journal of Materials Engineering and Performance.DOI
8. Xuezhi Wang, Qingyao Liu, Hanying Wang, Xinggang Li, Qijia Wang, Guiqiu Song, Minghai Wang (2026). Machining behavior and milling force modeling of powder metallurgy Superalloy under nanofluid minimum quantity lubrication. The International Journal of Advanced Manufacturing Technology.DOI
9. Xuezhi Wang, Lianxin Zhou, Na Liu, Na Yuan, Xinggang Li, Qijia Wang, Shujuan Ma, Minghai Wang (2026). Research on characteristics and hole quality of vibration-assisted deep hole drilling in titanium alloy. The International Journal of Advanced Manufacturing Technology.DOI
10. Qijia Wang, Kang Xiao, Minghai Wang, Xuezhi Wang, Xianjun Kong (2026). Research on milling performance of CF/PEEK composites assisted by laser-ultrasonic vibration. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
11. 王明海，张言可，孔宪俊，宋一平，李雅楠（2025）. 激光加热辅助铣削钛铝合金试验研究. 《工具技术》.
12. 王学智，王佳伟，王兴超，侯宁，王明海（2025）. 基于纳秒脉冲激光的结构化砂轮制备及其磨削实验研究. 《表面技术》.DOI
13. 王明海，刘雨宣，郑耀辉，王学智（2025）. 振动钻削参数对钛合金/铝合金叠层材料钻削轴向力的影响. 《机械设计与研究》.DOI
14. Minghai Wang, Yanan Li, Xianjun Kong, Xiaole Liu, Yinghu Sun (2025). Study on Surface Quality Formation Mechanism of Laser-Assisted Turning Si3N4 Ceramic. Journal of Materials Engineering and Performance.DOI
15. Xianjun Kong, Zhencai Wang, Xiaole Liu, Ning Hou, Minghai Wang (2025). Evolution mechanism of residual stress under the influence of thermo-mechanical coupling in laser-assisted machining of superalloy GH4169. The International Journal of Advanced Manufacturing Technology.DOI
16. Qijia Wang, Minghai Wang, Li Fu, Kang Xiao, Xuezhi Wang (2025). Study of the Material Removal Mechanism and Surface Damage in Laser-Assisted Milling of CF/PEEK. Materials.DOI
17. Kang Xiao, Minghai Wang, Qijia Wang, Chengming Tang, Xuezhi Wang (2025). Machinability Analysis of CF / PEEK Composites Under Laser‐Ultrasonic Coupling‐Assisted Milling. Polymer Composites.DOI
18. Xuezhi Wang, Xuezhi Wang, Zixiang Mei, Xingchao Wang, Minghai Wang, Ning Hou, Minghai Wang (2025). Study on surface quality of GH4169 superalloy milling with ultrasonic synergistic nanofluid minimal quantity lubrication. Scientific Reports.DOI
19. Xuezhi Wang, Chongli You, Xiaoguang Li, Shujuan Ma, Ning Hou, Guiqiu Song, Minghai Wang (2025). Chatter feature extraction for milling thin-walled parts based on GWO-VMD and CMSE. The International Journal of Advanced Manufacturing Technology.DOI
20. Xiaole Liu, Fanbo Meng, Hu Guang, Hou Ning, Minghai Wang, Xianjun Kong (2025). Surface Integrity Investigations and its Effect on the Fatigue Life in Laser Assisted Machining of TC6 Titanium Alloy. International Journal of Precision Engineering and Manufacturing.DOI
21. Qijia Wang, Li Hua Fu, Minghai Wang, Kang Xiao, Xuezhi Wang (2025). Investigation of Machining Characteristics and Parameter Optimization for Laser-Assisted Milling of CF/PEEK Composites. Micromachines.DOI
22. 王明海，李雅楠，孔宪俊（2024）. 刀具主偏角对镍基高温合金的车削颤振的影响分析. 《工具技术》.
23. 孔宪俊，刘世文，侯宁，郑耀辉，王明海（2024）. 激光加热辅助车削高温合金薄壁件变形仿真及试验研究. 《航空科学技术》.
24. 王明海，张威，刘香辰（2024）. 考虑位姿变换的钻铆工业机器人刚度寻优. 《机床与液压》.
25. 王明海，张威，刘香辰（2024）. 基于位姿变化的钻铆机器人刚度优化. 《机床与液压》.
26. Xiangchen Liu, Minghai Wang, Yaohui Zheng, Xuezhi Wang (2024). Fuzzy PI vibration suppression control strategy for space double flexible telescopic manipulator with fractional disturbance observer. Aerospace Science and Technology.DOI
27. Xianjun Kong, Xinbo Hu, Minghai Wang, Yaohui Zheng, Ning Hou (2024). Nanoindentation-induced serrated flow behavior and deformation mechanism in metallic glass: A combined experiments and molecular dynamics simulation. Journal of Alloys and Compounds.DOI
28. Jing Li, Yang Wang, Ligang Qu, Minghai Wang, Guangming Lv, Pengfei Su (2024). Study on Dynamic Scanning Trajectory of Large Aerospace Parts Based on 3D Scanning. Aerospace.DOI
29. Xianjun Kong, Yaodi Wang, Xiaole Liu, Zhanpeng Dang, Minghai Wang (2024). Research on the removal mechanism and surface damage of laser assisted cutting of CFRP materials. Journal of Manufacturing Processes.DOI
30. Xianjun Kong, Zeshan Cheng, Wenwu Wang, Ning Hou, Minghai Wang (2024). Evolution of the supercooled liquid region and STZ in laser assisted scratching Cu50Zr50 amorphous alloy. Applied Physics A.DOI
31. Xianjun Kong, Xinbo Hu, Minghai Wang, Yaohui Zheng (2024). Ultrasonic elliptical vibratory nanocutting mechanisms of Cu50Zr50 amorphous alloy: A molecular dynamics simulation. Intermetallics.DOI
32. Xianjun Kong, Xiaole Liu, Wenwu Wang, Minghai Wang, Ning Hou (2024). Mechanism of void interaction and closure in nanocutting of amorphous alloy. Applied Physics A.DOI
33. Xianjun Kong, Fanbo Meng, Xiaole Liu, Ning Hou, Yaohui Zheng, Minghai Wang (2024). Enhancing machinability and removal mechanism of SiCf/SiC composites in laser ablation assisted step milling. Ceramics International.DOI
34. Ning Hou, Lidong Bai, Chao Ye, Xiaoxia Niu, Minghai Wang, Shutao Huang, Qijia Wang (2024). An analytical model for predicting the depth of subsurface plastic deformation during cutting titanium alloy. The International Journal of Advanced Manufacturing Technology.DOI
35. 王学智，丛铭，刘清遥，王奔，王明海（2023）. SiCf/SiC复合材料超声辅助磨削试验研究. 《工具技术》.
36. 王明海，图晨华，王奔，宋万万，张静波（2023）. 硬质合金刀具刃口形状对高温合金切削力的影响. 《工具技术》.
37. 王明海，葛鹏程，郑耀辉（2023）. 薄壁环形工件车削颤振有限元分析及试验研究. 《工具技术》.
38. 王明海，李雅楠，孔宪俊（2023）. 车削Si3N4陶瓷的表面质量形成机理研究. 《工具技术》.
39. Qi Zhang, Ben Wang, Jiaxing Zhao, Ning Hou, Minghai Wang (2023). Formation Mechanism of Surface Integrity Anisotropism after Milling Laser-Deposition-Manufactured Titanium Alloy. Journal of Materials Engineering and Performance.DOI
40. Jing Li, Minghai Wang, Ligang Qu, Guangming Lv (2023). Research on Three-Dimensional Scanning Path Planning of Casing Parts Based on Industrial Robot. Applied Sciences.DOI
41. Xianjun Kong, Zhanpeng Dang, Xiaole Liu, Minghai Wang (2023). A comparative evaluation of laser assisted drilling CFRP with improved machining mechanism. Journal of Materials Processing Technology.DOI
42. Yaohui Zheng, Pengcheng Hu, Minghai Wang, Xiaoyue Huang (2023). Prediction Model for the Evolution of Residual Stresses and Machining Deformation of Uneven Milling Plate Blanks. Materials.DOI
43. Yaohui Zheng, Xiaoyue Huang, Minghai Wang, Pengcheng Hu (2023). Source and Accumulation Analysis of Deviation during Multi-Level Assembly of an Aircraft Rear Fuselage Frame. Applied Sciences.DOI
44. Wujiu Pan, Xianmu Li, Lele Sun, Hongxing Song, Minghai Wang (2023). General prediction model of residual pretightening force of bolt group with one-step and multi-step pretightening and analysis of influencing factors from the perspective of elastic interaction. Engineering Computations.DOI
45. Xianjun Kong, Guang Ling Hu, Ning Hou, Na Liu, Minghai Wang (2023). Numerical and experimental investigations on the laser assisted machining of the TC6 titanium alloy. Journal of Manufacturing Processes.DOI
46. Wujiu Pan, Haoyong Qu, Yinghao Sun, Minghai Wang (2023). A deep convolutional neural network model with two-stream feature fusion and cross-load adaptive characteristics for fault diagnosis. Measurement Science and Technology.DOI
47. Xuezhi Wang, Zhelun Ma, Ying Shi, Yaohui Zheng, Minghai Wang (2023). Controllable Preparation of Ceramic CBN Composites with Preferred Abrasive Orientation and Excellent Properties under Magnetic Fields. Journal of Materials Engineering and Performance.DOI
48. Wujiu Pan, Liangyu Ling, Haoyong Qu, Minghai Wang (2023). Nonlinear Vibration of Bolted Rotor Bearing System Accounting for the Bending Stiffness Characteristics of the Connection Interface. International Journal of Bifurcation and Chaos.DOI
49. Xiangchen Liu, Minghai Wang, Yihan Wang (2023). Improved Vibration Suppression Strategy of Fuzzy PI Servo Control for Dual Flexible System with Flexible Joints. Mathematics.DOI
50. Xianjun Kong, Wenwu Wang, Minghai Wang, Ning Hou (2023). Nanocutting mechanisms of Cu50Zr50 amorphous alloy: A molecular dynamics simulation. Journal of Non-Crystalline Solids.DOI
51. 张静波，王奔，王明海，宋万万，龙志凯，图晨华（2022）. 磨粒尺寸对硬质合金铣刀刃口钝化的影响. 《组合机床与自动化加工技术》.
52. 王明海，葛鹏程，崔林琳，郑耀辉（2022）. 刀尖圆弧半径对车削颤振稳定性影响分析. 《组合机床与自动化加工技术》.
53. 王明海，张健（2022）. 液氮低温冷却钻削叠层复合材料的有限元仿真分析与试验研究. 《工具技术》.
54. 孔宪俊，王文武，赵明，刘娜，吴志新，王明海（2022）. 陶瓷基复合材料铣削力优化及刀具磨损研究. 《工具技术》.
55. 王明海，张健，王奔，郑耀辉，刘标，董志（2022）. 阶梯钻钻削Ti6Al4V过程的切削力与残余应力仿真分析. 《工具技术》.
56. 孔宪俊，王进，刘标，刘屹巍，刘胜男，王明海（2022）. 车削GH4169镍基高温合金的刀具磨损率仿真及实验研究. 《工具技术》.
57. 孔宪俊，胡光，刘标，董志，慈言海，王明海（2022）. 钛合金车削切削力及表面粗糙度优化分析. 《工具技术》.
58. 王明海，图晨华，吴志新，王奔，张静波（2022）. 硬质合金铣刀钝圆半径对Inconel 718高温合金切削力与切削温度的影响. 《工具技术》.
59. 王奔，王禹封，赵华，王明海（2022）. 钻孔过程中切削温度对CFRP亚表面的影响（英文）. 《稀有金属材料与工程》.
60. 王奔，杨全威，邓佳伟，王明海，郑耀辉，赵明，闫永达（2022）. 石墨烯纳米流体加工Ti-6Al-4V合金的黏着磨损、表面粗糙度和切削力（英文）. 《稀有金属材料与工程》.
61. 孔宪俊，胡光，赵明，刘娜，侯宁，王明海（2022）. 车削高温合金GH4169表面粗糙度及残余应力优化分析. 《机床与液压》.
62. Xianjun Kong, Zhanpeng Dang, Xiaole Liu, Minghai Wang, Ning Hou (2022). Simulation and Experimental Analysis of Tool Wear and Surface Roughness in Laser Assisted Machining of Titanium Alloy. Crystals.DOI
63. Xianjun Kong, Shiwen Liu, Ning Hou, Ming Zhao, Na Liu, Minghai Wang (2022). Cutting performance and tool wear in laser-assisted grinding of SiCf/SiC ceramic matrix composites. Materials Research Express.DOI
64. Xianjun Kong, Guang Ling Hu, Minghai Wang, Ming Long Zhao, Zhenlong Wang (2022). Investigations on chip formation mechanism and surface integrity analysis in LAM of 45%SiCp/Al composites. The International Journal of Advanced Manufacturing Technology.DOI
65. Xianjun Kong, Jin Wang, Minghai Wang, Ben Wang, Yaohui Zheng, Lijun Yang (2022). Retraction notice to “Mechanisms involved in the tool life improvement of laser assisted machining 45%SiCp/Al composites” [Opt. Laser Technol. 139 (2021) 106919]. Optics & Laser Technology.DOI
66. Ben Wang, Quanwei Yang, Jiawei Deng, Ning Hou, Xuezhi Wang, Minghai Wang (2022). Effect of graphene nanoparticles and sulfurized additives to MQL for the machining of Ti-6Al-4 V. The International Journal of Advanced Manufacturing Technology.DOI
67. Xiangchen Liu, Yihan Wang, Minghai Wang (2022). Speed Fluctuation Suppression Strategy of Servo System with Flexible Load Based on Pole Assignment Fuzzy Adaptive PID. Mathematics.DOI
68. Ning Hou, Yuxin Zhang, Minghai Wang, Shutao Huang, Xianjun Kong (2022). Discrete characteristic and edge effect during subsurface microhardness measurement of Ti-6Al-4V alloy. Materials Research Express.DOI
69. Xuezhi Wang, Cong Ming, Yaohui Zheng, Ning Hou, Minghai Wang (2022). Study on grinding nickel-based superalloy GH4169 with ceramic bond CBN wheel controlling abrasive orientation by magnetic field. The International Journal of Advanced Manufacturing Technology.DOI
70. Xuezhi Wang, Qingyao Liu, Yaohui Zheng, Wei Dong Xing, Minghai Wang (2022). A grinding force prediction model with random distribution of abrasive grains: considering material removal and undeformed chips. The International Journal of Advanced Manufacturing Technology.DOI
71. 王明海，赵新伟，李晓鹏，庄鑫（2021）. 刀具涂层和几何参数对钻削SiC/SiC的影响. 《组合机床与自动化加工技术》.
72. Wujiu Pan, Liangyu Ling, Haoyong Qu, Minghai Wang (2021). Early Wear Fault Dynamics Analysis Method of Gear Coupled Rotor System Based on Dynamic Fractal Backlash. Journal of Computational and Nonlinear Dynamics.DOI
73. Wujiu Pan, Liangyu Ling, Haoyong Qu, Minghai Wang (2021). Nonlinear response analysis of aero-engine rotor bearing rub-impact system caused by horizontal yawing maneuver load. International Journal of Non-Linear Mechanics.DOI
74. Ben Wang, Hua Zhao, Fan Zhang, Minghai Wang, Yaohui Zheng (2021). Comparison of the geometric accuracy of holes made in CFRP/Ti laminate by drilling and helical milling. The International Journal of Advanced Manufacturing Technology.DOI
75. Wujiu Pan, Liangyu Ling, Haoyong Qu, Minghai Wang (2021). Coupling dynamic behavior of aero-engine rotor system caused by rolling, pitching and yawing maneuver loads. Applied Mathematical Modelling.DOI
76. Xianjun Kong, Wenwu Wang, Minghai Wang, Lijun Yang (2021). Influence of temperature on the cutting performance of single-crystal beryllium: a molecular dynamics simulation investigation. Applied Physics A.DOI
77. Ning Hou, Minghai Wang, Ben Wang, Yaohui Zheng, Siyu Zhou, Ce Song (2021). Fundamental functions of physical and chemical principles in the polishing of titanium alloys: mechanisms and problems. The International Journal of Advanced Manufacturing Technology.DOI
78. Ning Hou, Yong an Zhang, Liangchi Zhang, Minghai Wang (2021). Material removal mechanisms and characteristics of potassium dihydrogen phosphate crystals under nanoscratching. Advances in Manufacturing.DOI
79. Wujiu Pan, Changxuan Song, Liangyu Ling, Haoyong Qu, Minghai Wang (2021). Unloading contact mechanics analysis of elastic–plastic fractal surface. Archive of Applied Mechanics.DOI
80. Ben Wang, Yufeng Wang, Hua Zhao, Minghai Wang, Lei Sun (2021). Mechanisms and evaluation of the influence of cutting temperature on the damage of CFRP by helical milling. The International Journal of Advanced Manufacturing Technology.DOI
81. Xianjun Kong, Jin Wang, Minghai Wang, Ben Wang, Yaohui Zheng, Lijun Yang (2021). RETRACTED: Mechanisms involved in the tool life improvement of laser assisted machining 45%SiCp/Al composites. Optics & Laser Technology.DOI
82. Ning Hou, Minghai Wang, Yong an Zhang, Hao Wang, Ce Song (2021). Insights into the fatigue property of titanium alloy Ti-6Al-4V in aero-engine from the subsurface damages induced by milling: state of the art. The International Journal of Advanced Manufacturing Technology.DOI
83. Wujiu Pan, Liangyu Ling, Haoyong Qu, Minghai Wang (2021). Analysis of complex modal instability of a minimal friction self-excited vibration system from multiscale fractal surface topography. European Journal of Mechanics - A/Solids.DOI
84. 王明海，王福宁，王奔，刘琪，尤思尧（2020）. 刀具前角对单晶硅超精密加工表面质量的影响. 《沈阳航空航天大学学报》.
85. 孔宪俊，王明海，王奔，郑耀辉，王扬，杨立军（2020）. 45% SiCp/Al复合材料切削表面对高斯激光吸收规律研究. 《兵工学报》.
86. 王明海，孟群，孔宪俊（2020）. 车削45%SiCp/Al复合材料刀具寿命及磨损机制研究. 《组合机床与自动化加工技术》.DOI
87. 郑耀辉，赵明月，刘娜，王明海（2020）. 2024铝合金结构件残余应力的评估与变形预测. 《组合机床与自动化加工技术》.
88. 王奔，王禹封，赵华，孙磊，庄鑫，王明海（2020）. 钛合金对CFRP/Ti叠层构件螺旋铣孔表面质量的影响. 《组合机床与自动化加工技术》.DOI
89. 王明海，王江，郑耀辉，赵明，刘娜（2020）. 薄壁变形机匣件限位检测机理分析与预测. 《组合机床与自动化加工技术》.
90. Ben Wang, Qi Zhang, Minghai Wang, Yaohui Zheng, Xianjun Kong (2020). Comparison of surface integrity of Ti6Al4V titanium alloy manufactured by laser deposition and traditional method after end milling. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
91. Wujiu Pan, Hongshuang Li, Minghai Wang, Lin-lin Wang (2020). Elastothermodynamic damping modeling of three-layer Kirchhoff–Love microplate considering three-dimensional heat conduction. Applied Mathematical Modelling.DOI
92. Ben Wang, Tianxu Hao, Quanwei Yang, Minghai Wang, Yaohui Zheng (2020). Effects of temperature and loads on hardness and surface failure modes of cemented carbide. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
93. Ben Wang, Yufeng Wang, Hua Zhao, Lei Sun, Minghai Wang, Xianjun Kong (2020). Effect of a Ti alloy layer on CFRP hole quality during helical milling of CFRP/Ti laminate. Composite Structures.DOI
94. Lei Sun, Hang Gao, Ben Wang, Yongjie Bao, Minghai Wang, Shujuan Ma (2020). Mechanism of reduction of damage during helical milling of titanium/CFRP/aluminium stacks. The International Journal of Advanced Manufacturing Technology.DOI
95. Xianjun Kong, Ben Wang, Minghai Wang, Yaohui Zheng, Shujuan Ma, Lijun Yang (2020). Microscratch characteristic and deformation mechanism of SiC particle-reinforced composites at elevated temperatures. Advanced Composites Letters.DOI
96. Wujiu Pan, Nan Wang, Hongshuang Li, Minghai Wang (2020). Investigation on the transfer characteristics of the normal interface force. Mechanics Based Design of Structures and Machines.DOI
97. Ben Wang, Qi Zhang, Minghai Wang, Yaohui Zheng, Xianjun Kong (2020). A predictive model of milling surface roughness. The International Journal of Advanced Manufacturing Technology.DOI
98. 王奔，常康，王碧玲，张亚飞，王明海（2019）. 不同刀具车削GH4169时的切削性能对比. 《组合机床与自动化加工技术》.
99. 王奔，常康，王碧玲，迟兴春，王明海（2019）. 不同切削距离下硬质合金刀具加工GH4169的切削性能研究. 《组合机床与自动化加工技术》.
100. 孔宪俊，王明海，王奔，郑耀辉，王扬，杨立军（2019）. 激光诱致温度场对38CrN3MoV淬火组织转变及性能影响研究. 《航空制造技术》.DOI
101. 王奔，杨博文，张凡，郑耀辉，王明海，孔宪俊（2019）. 切削温度及加工时间对CFRP弯曲性能的影响. 《组合机床与自动化加工技术》.DOI
102. 郑耀辉，赵明月，刘娜，王明海（2019）. 2024铝合金铣削加工表面残余应力仿真研究. 《组合机床与自动化加工技术》.DOI
103. Xianjun Kong, Minghai Wang, Ben Wang, Yaohui Zheng, Lijun Yang (2019). Thermal mismatch stress relaxation and dislocation transformation of 45%SiCp/Al composites by continuous diode laser heating. Applied Physics A.DOI
104. Ben Wang, Bowen Yang, Minghai Wang, Yaohui Zheng, Xianjun Hong, Fan Zhang (2019). Effect of Cutting Temperature on Bending Properties of Carbon Fibre Reinforced Plastics. Science and Engineering of Composite Materials.DOI
105. 王明海，王朋，郑耀辉，李晓鹏，邵晨峰（2018）. 初始残余应力对薄壁回转件加工变形的影响. 《组合机床与自动化加工技术》.
106. 王明海，赵明月，郑耀辉，王奔，马书娟，李晓鹏（2018）. 非规则结构件铣削加工低变形走刀方式有限元分析. 《组合机床与自动化加工技术》.
107. 王奔，马振博，王明海，常康，郑耀辉（2018）. CFRP/Ti叠层材料螺旋铣孔与钻孔的刀具磨损对比与分析. 《工具技术》.
108. 王明海，周冬亮，郑耀辉，邵晨峰，庄鑫（2018）. TA15钛合金铣削试验及磨损分析. 《工具技术》.
109. 郑耀辉，王朋，王明海，李晓鹏（2018）. 不同加工顺序对薄壁件加工变形的仿真研究. 《组合机床与自动化加工技术》.
110. 王奔，印文典，王明海，马振博，杨博文，常康，郑耀辉（2018）. CFRP/Ti叠层构件钻削过程中硬质合金刀具磨损特性. 《组合机床与自动化加工技术》.
111. Ben Wang, Kang Chang, Minghai Wang, Fan Zhang, Yafei Zhang, Yaohui Zheng (2018). Experimental studies on helical milling process to improve hole quality for the Superalloy (MSRR7197). The International Journal of Advanced Manufacturing Technology.DOI
112. 王明海，吕海洋，刘娜，郑耀辉，王奔（2017）. 轮廓法测量残余应力中影响切割质量的参数研究. 《工具技术》.
113. 郑耀辉，吕海洋，李晓鹏，王明海，王奔（2017）. 大型复杂结构件加工变形有限元快速仿真方法. 《组合机床与自动化加工技术》.
114. 王明海，张枢南，郑耀辉，王奔，印文典（2017）. 单晶硅超精密切削的刀具磨损试验研究. 《组合机床与自动化加工技术》.
115. Haitao Liu, Wenkun Xie, Yazhou Sun, Xiufu Zhu, Minghai Wang (2017). Investigations on brittle-ductile cutting transition and crack formation in diamond cutting of mono-crystalline silicon. The International Journal of Advanced Manufacturing Technology.DOI
116. Ben Wang, Wendian Yin, Minghai Wang, Yaohui Zheng, Xiaopeng Li, Zhenbo Ma (2017). Edge chipping mechanism and failure time prediction on carbide cemented tool during drilling of CFRP/Ti stack. The International Journal of Advanced Manufacturing Technology.DOI
117. 金晓波，康万军，曹军，吕海洋，郑耀辉，王明海（2016）. 钻头几何角度对CFRP和钛合金叠层制孔的影响. 《工具技术》.
118. 郑耀辉，王江涛，王明海，李晓鹏（2016）. 基于装夹方案的夹紧力及加工变形仿真. 《组合机床与自动化加工技术》.
119. 王晓燕，胡付红，郑耀辉，王明海，王奔，李晓鹏（2016）. 基于模糊层次分析法的刀具优选技术研究. 《组合机床与自动化加工技术》.
120. 郑耀辉，胡付红，王明海，王晓燕（2016）. 基于模糊层次分析法的多工艺方案评价. 《组合机床与自动化加工技术》.
121. 王奔，刘东玺，王明海，郑耀辉，印文典（2016）. 刀具前角对聚晶金刚石刀具磨损过程的影响. 《组合机床与自动化加工技术》.
122. 郑耀辉，王江涛，王明海，李晓鹏，王奔（2016）. 大型薄壁机匣件辅助支撑方式优化. 《制造技术与机床》.
123. 王明海，徐颖翔，姜庆杰（2015）. 基于有限元仿真的碳纤维复合材料螺旋铣孔研究. 《制造技术与机床》.
124. 王奔，刘东玺，王明海，印文典，郑耀辉（2015）. 聚晶金刚石刀具切削各向同性热解石墨过程中的磨损机理. 《中国机械工程》.
125. 王明海，王京刚，郑耀辉，高蕾，李世永（2015）. 基于IAGA-LSSVM的切削加工表面粗糙度的智能预测. 《制造技术与机床》.
126. 王明海，姜庆杰，刘大响，徐颖翔（2015）. 超声扭转振动铣削C/SiC复合材料表面粗糙度研究. 《组合机床与自动化加工技术》.
127. 王明海，刘明辉，徐颖翔，刘大响，姜庆杰（2015）. 不同工艺对碳纤维复合材料制孔的影响. 《组合机床与自动化加工技术》.
128. 王明海，刘东玺，刘大响，王奔，郑耀辉（2015）. 工艺参数对各向同性热解石墨超精密加工质量的影响. 《组合机床与自动化加工技术》.
129. Minghai Wang, Ben Wang, Yaohui Zheng (2015). Weakening of the anisotropy of surface roughness in ultra-precision turning of single-crystal silicon. Chinese Journal of Aeronautics.DOI
130. 王明海，徐颖翔，郑耀辉（2014）. 钛合金与铝合金叠层材料制孔研究. 《制造技术与机床》.
131. Minghai Wang, Yue Sun (2014). Error prediction and compensation based on interference-free tool paths in blade milling. The International Journal of Advanced Manufacturing Technology.DOI
132. Minghai Wang, Lei Gao, Yaohui Zheng (2014). Prediction of regenerative chatter in the high-speed vertical milling of thin-walled workpiece made of titanium alloy. The International Journal of Advanced Manufacturing Technology.DOI
133. 王明海，李世永，郑耀辉（2013）. Ti6Al4V的超声振动铣削加工三维有限元仿真. 《塑性工程学报》.
134. 王明海，王维，高蕾（2013）. 超精密切削中单晶脆性材料脆塑转变过程. 《北京航空航天大学学报》.
135. 王明海，王京刚，郑耀辉，李世永，高蕾（2013）. 基于改进遗传算法的钛合金铣削参数优化. 《组合机床与自动化加工技术》.
136. 王明海，孙越，孙国强（2013）. 基于刀具轨迹的扭曲薄壁件加工仿真与实验. 《南京航空航天大学学报(自然科学版)》.
137. 王明海，孙国强，孙越（2012）. 小角度螺旋槽钻头加工复合材料的模拟研究. 《制造技术与机床》.
138. Minghai Wang, Wei Wang, Zesheng Lu (2012). Critical cutting thickness in ultra-precision machining of single crystal silicon. The International Journal of Advanced Manufacturing Technology.DOI
139. 聂鹏，康晓峰，王明海（2011）. 金刚石工具的性能、应用研究与进展. 《沈阳航空航天大学学报》.
140. 杨得国，王明海，王立安（2011）. 巡航导弹航迹与威胁区相对位置判定方法. 《兵器装备工程学报》.
141. 王明海，王虎军，刘中海（2011）. 不同速度下切削钛合金刀具上温度场应力场的数值模拟. 《制造技术与机床》.
142. Minghai Wang, Wei Wang, Zesheng Lu (2011). Anisotropy of machined surfaces involved in the ultra-precision turning of single-crystal silicon—a simulation and experimental study. The International Journal of Advanced Manufacturing Technology.DOI
143. Minghai Wang (2011). Research on property and application of diamond tools and its development. Journal of Shenyang Aerospace University.
144. 王明海，王虎军，韩锰，刘中海（2010）. 精加工中刀具不同前角的有限元模拟研究. 《工具技术》.
145. 于超，王明海，王焱，鲍永杰（2010）. 氢对Ti600合金切削加工性能影响的试验研究. 《工具技术》.
146. Minghai Wang, Hujun Wang, Zhonghai Liu (2010). Study on the cutting mechanism and the brittle ductile transition model of isotropic pyrolyric graphite. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
147. 庞继有，胡家农，于在梅，刘中海，王明海，卢泽生（2009）. 超精密复合加工机床的总体设计. 《航空制造技术》.
148. 庞继有，胡家农，于在梅，张川，杨金发，王明海，万熠（2009）. 航空发动机刀具切削加工现状与发展. 《航空制造技术》.
149. 李邦杰，王明海（2009）. 滑翔式远程导弹滑翔段弹道研究. 《宇航学报》.
150. 于超，王焱，鲍永杰，王明海（2009）. 氢对TC21合金切削加工性影响的试验研究. 《制造技术与机床》.
151. 杨涛，王顺宏，曹锐，王明海（2009）. 弹道导弹惯导系统误差系数自由段补偿. 《导弹与航天运载技术(中英文)》.
152. 魏鹏涛，王明海（2008）. 陀螺经纬仪漂移误差对导弹落点偏差的影响. 《兵器装备工程学报》.
153. 王继平，王明海，张志辉（2008）. 扰动引力的神经网络逼近算法. 《宇航学报》.
154. 康建斌，赵建亭，王明海，赵久奋（2006）. 基于固体火箭发动机耗尽关机的混合轨道自适应制导方案研究. 《固体火箭技术》.
155. 周江华，苗育红，王明海（2004）. 姿态运动的Rodrigues参数描述. 《宇航学报》.
156. 康建斌，刘新学，王明海，张胜才（2002）. GPS在弹道导弹制导工具误差分离中的应用研究. 《导弹与航天运载技术(中英文)》.
157. 赵久奋，王明海（2001）. 预警卫星对导弹预警模型的仿真. 《固体火箭技术》.
158. 赵久奋，王明海（2000）. 红外探测阵列对固体导弹尾焰跟踪定位的研究. 《固体火箭技术》.
159. 王晓春，王明海（1997）. 采用刮削方式快速清除小齿轮毛刺. 《工具技术》.
160. 王明海（1989）. 用标准丝锥改制成跳牙丝锥及其应用. 《工具技术》.
161. 王明海（1983）. 滚丝轮轴向进给对螺纹零件表面光洁度的影响. 《工具技术》.