李伟力

2026

双轴励磁调相机异步运行能力与转子温度场研究

《电网技术》

DOI

2026

基于温升分区匹配的抽水蓄能电机转子磁轭通风结构设计与流热机理研究

《大电机技术》

2026

Electromagnetic–structural coupling-based analysis of vibration characteristics in interior permanent magnet synchronous motor with experimental validation

Engineering Science and Technology, an International Journal

DOI

2026

Study on temperature distribution of permanent magnet synchronous motor for electric vehicles under three-port hybrid cooling structure

Case Studies in Thermal Engineering

DOI

2026

Research on temperature estimation and suppression methods for permanent magnets in interior permanent magnet synchronous motor

Applied Thermal Engineering

DOI

2026

Identification and Localization for Inter-Turn Short Circuit Fault of PMSMs Using α-β Plane Voltage and Current in FOC

IEEE Transactions on Power Electronics

DOI

2026

Analysis and Optimization of a Hybrid Oil-Cooled PMSM Considering Oil Film Non-Uniformity and Layered Heat Transfer

IEEE Transactions on Transportation Electrification

DOI

2026

Comprehensive Analysis for the Electrical and Thermal Performance of DT-PMSMs with Two Typical Pole-Slot Combinations

IEEE Transactions on Energy Conversion

DOI

2026

Study on the Hotspot Temperature Suppression Method of Hairpin Winding in Permanent Magnet Synchronous Motors for EV Applications

IEEE Transactions on Transportation Electrification

DOI

2026

Loss Mechanism Analysis and Cooling Structure Design for Enhanced Asynchronous Operation of a Dual-Excited Synchronous Condenser

IEEE Transactions on Energy Conversion

DOI

2025

可变速双轴励磁调相机转子结构设计及阻尼材料优化

《电网技术》

2025

永磁材料的晶界扩散及其在机器人关节用永磁同步电机优化设计中的应用研究

《电机与控制学报》

DOI

2025

金属屏蔽材料对双轴励磁调相机端部电磁场和损耗的影响

《大电机技术》

2025

Equation chapter 1 section 1Triple-port cooling system and temperature field calculation and analysis of IPMSM for electric vehicles

Microchemical journal (Print)

DOI

2025

Temperature-Field Analysis of an Air-Cooled Line-Start Solid-Rotor PMSM With Alternating-Hollow-Solid Slot Arrangement

IEEE Transactions on Energy Conversion

DOI

2025

Electromagnetic vibration performance of dual three-phase PMSMs considering multiple fault-tolerant operation modes

Journal of Power Electronics

DOI

2025

Electromagnetic Vibration Analysis for Dual Three-phase PMSM under Single Three-phase Conditions

IEEE International Conference on Mechatronics (ICM)

DOI

2025

Research on Fault Diagnosis Method Based on Probe Coil for Inter-Turn Short Circuit and Rotor Eccentricity

Conference on Fully Actuated System Theory and Applications (FASTA)

DOI

2025

Influence of Rotor Slot Wedge Material on Temperature Distribution of Dual-Excited Synchronous Condenser during Asynchronous Operation

Conference record

DOI

2025

Design Considerations and Many-Objective Optimization of Synchronous Condenser Used for New Energy Power System Based on Electromagnetic-Thermal Constraints

IEEE Transactions on Industrial Electronics

DOI

2025

Efficient ventilation optimization and thermal balance management technology for the large turbogenerator rotor

International Conference on Electrical Machines and Systems (ICEMS)

DOI

2025

Thermal analysis of direct-drive offshore permanent magnet synchronous generator with peak–valley heat sinks

Sustainable Energy Technologies and Assessments

DOI

2025

Study on Inverse Correlation Between Rare-earth Consumption and Temperature Field in Permanent Magnet Motor of Electric Vehicle

Conference record

DOI

2025

Impact of Key Parameters of Motor Structure, Battery Temperature, and Control Strategy on the Acceleration and Efficiency Performance of Electric Vehicles

Conference record

DOI

2025

Investigation of Fluid Flow and Heat Transfer in a Turbogenerator Rotor With Alternating Radial Ventilation System

IEEE Transactions on Energy Conversion

DOI

2025

Fluid and heat transfer enhancement of synchronous condenser rotor with alternating contraction ventiducts based on global fluid network model

International Communications in Heat and Mass Transfer

DOI

2025

Electromagnetic parameter analysis and influence mechanism of q-axis excitation winding structures on doubly excited synchronous machine ventilation and cooling

Journal of Power Electronics

DOI

2025

Open-Circuit Fault Diagnosis Method for the Dual Three-Phase Permanent Magnet Synchronous Motor Drive in the Fault-Tolerant Mode

IEEE Transactions on Instrumentation and Measurement

DOI

2025

Thermal Study of the Stator in Large-Capacity Turbine Generator Cooled by Water-Hydrogen

Lecture notes in electrical engineering

DOI

2025

Analysis of the External Characteristics and Eddy Current Loss of PMSG-Based WECS Relying on a Multi-Domain Coupling Model

Lecture notes in electrical engineering

DOI

2024

汽轮发电机带有交替径向风道的转子流体与传热耦合分析

《电机与控制学报》

2024

双三相永磁同步电动机驱动器全开路故障模式的诊断方法

《电机与控制学报》

2024

Optimization Design Of PMSM With High Torque Density and Large Overload

IEEE Transportation Electrification Conference and Expo, Asia-Pacific

DOI

2024

Optimisation of Permanent Magnet Synchronous Motor for Electric Vehicles

International Conference on Electrical Machines and Systems

DOI

2024

Design and Analysis of Series Dual-Excited Synchronous Machine for Power Flow Control

Asia Conference on Energy and Electrical Engineering (ACEEE)

DOI

2024

Comparative study of electromagnetic vibration on single three‐phase and dual three‐phase permanent magnet machines with different winding layouts

IET Electric Power Applications

DOI

2024

Coupled Electromagnetic-Fluid- Thermal Analysis in Large Scale Water-Hydrogen-Hydrogen Cooled Generator-Condenser Under Different Operations

IEEE Biennial Conference on Electromagnetic Field Computation (CEFC)

DOI

2024

Numerical Calculation of Fluid Heat Transfer in Rotor of Large Air-Cooled Generator Based on Global Ventilation Network Model

IEEE Transactions on Industry Applications

DOI

2024

Optimization Design of Electromagnetic Vibration of Permanent Magnet Synchronous Motor Considering Force Modulation

IEEE International Electrical and Energy Conference (CIEEC)

DOI

2024

Research on Intrinsic Shaft Voltage in Permanent Magnet Synchronous Wind Generators with Sectionalized and Overlapped Stator Laminations

Lecture notes in electrical engineering

DOI

2023

Influence of Modification of Dual V-Shaped IPMSM Rotor Permanent Magnet Structure on Motor Performance

IEEE Vehicle Power and Propulsion Conference (VPPC)

DOI

2023

Quantitative Analysis of the Influence of PM Reshaping on EM Vibration in SPMSM Considering Structure Modulation

IEEE Transactions on Transportation Electrification

DOI

2023

Numerical Calculation of Fluid Heat Transfer in Rotor of Large Air-cooled Generator Based on Global Ventilation Network Model

International Conference on Electrical Machines and Systems (ICEMS)

DOI

2023

Impact of excitation windings with different cooling structures on cooling performance and cost of a full air-cooled pumped storage power generator/motor

Journal of Thermal Analysis and Calorimetry

DOI

2023

Modelling of high frequency bearing voltage for dual‐winding permanent magnet synchronous generators

IET Electric Power Applications

DOI

2023

Realization of Reduced Common-Mode Voltage PWM Strategy Under Low Switching Frequency

IEEE International Power Electronics and Application Symposium (PEAS)

DOI

2023

Modeling and Measurement of Bearing Voltage in Traction Motor for High Speed Train

IEEE Vehicle Power and Propulsion Conference (VPPC)

DOI

2023

Research on the Calculation of Rotor’s Convective Heat Transfer Coefficient of High-Speed Drive Motor for EVs Based on Multiple Scenarios

Journal of Electrical Engineering and Technology

DOI

2023

Influence of Rotor Damping Bars on Rotor Temperature Rise of Synchronous Condenser After Single-Phase Short-Circuit Fault

IEEE Transactions on Industry Applications

DOI

2022

双轴励磁发电机功率跟踪励磁控制系统研究

《电力自动化设备》

2022

不同磁极拓扑结构的轴向磁通永磁同步电机传热的研究

《电机与控制学报》

2022

不同通风结构下高铁异步牵引电机温度场分析

《电机与控制学报》

2022

Wide-Speed-Range Performances of Rotor Structural Deformation of V-Shaped IPMSM in Electric Vehicles

IEEE Biennial Conference on Electromagnetic Field Computation (CEFC)

DOI

2022

Wide-Speed-Range Performance of IPMSM with Variation of Saliency Considering Saturation for Electric Vehicle Application

International Conference on Electrical Machines and Systems (ICEMS)

DOI

2022

Influence of Inverter Open Circuit Fault on Multiple Physical Quantities in the PMSM

IEEE Transactions on Power Electronics

DOI

2022

Internal Ventilation and Thermal Characteristics of a New Ventilation System for a Large Offshore Permanent Magnet Wind Turbine Generator

IEEE International Power and Renewable Energy Conference (IPRECON)

DOI

2022

Influence of Magnetic Shield Thickness on Stator End Leakage Reactance of Synchronous Condenser

IEEE Energy Conversion Congress and Exposition (ECCE)

DOI

2022

Heat transfer in air-gap and thermal-fluid coupling field of a large-scale turbine generator

Heat and Mass Transfer

DOI

2022

Transient Process Analysis of Multi-Physical Parameters of Turbine Generator During Out of Phase Synchronization Fault

IEEE Transactions on Energy Conversion

DOI

2022

Health diagnosis of permanent magnets under different cooling system effectiveness in high-speed permanent magnet motors for electric vehicles

Journal of Power Electronics

DOI

2022

Influence of Rotor Damping Bars on Rotor Temperature Rise of Synchronous Condenser after Single-Phase Short-Circuit Fault

Conference record

DOI

2022

Analysis of interpolar air motion coherence and heat transfer under different asymmetric rotor yoke ventilation duct structures of the pumped storage power machine

International Communications in Heat and Mass Transfer

DOI

2022

Demagnetization Fault Diagnosis of the Permanent Magnet Motor for Electric Vehicles Based on Temperature Characteristic Quantity

IEEE Transactions on Transportation Electrification

DOI

2022

Temperature Analysis for the Asymmetric Six-Phase Permanent Magnet Synchronous Motor in Healthy and Fault-Tolerant Modes

IEEE Transactions on Industrial Electronics

DOI

2022

Power Tracking Excitation Control and Its Parameter Optimization of Dual-Excited Synchronous Generator

IEEE Transactions on Industry Applications

DOI

2022

Simplified Piecewise Model of Line-Start Permanent Magnet Linear Synchronous Motors

IEEE Transactions on Industry Applications

DOI

2022

Structure of a permanent magnet motor used for electric vehicles to suppress the eddy current effect

Journal of Power Electronics

DOI

2021

Study on Power Tracking Excitation Control and Parameters Sensitivity of Dual-Excited Synchronous Generator

IEEE Energy Conversion Congress and Exposition (ECCE)

DOI

2021

A Reliability Design Method of High-Speed Permanent Magnet Synchronous Motors Based on Assembly Error Randomnes

Conference record

DOI

2021

Influence of the Variable Cross-Section Stator Ventilation Structure on the Temperature of an Induction Motor

Energies

DOI

2021

Stator Non-Uniform Radial Ventilation Design Methodology for a 15 MW Turbo-Synchronous Generator Based on Single Ventilation Duct Subsystem

Energies

DOI

2021

Comparative analysis of the operating performance, magnetic field, and temperature rise of the three‐phase permanent magnet synchronous motor with or without fault‐tolerant control under single‐phase open‐circuit fault

IET Electric Power Applications

DOI

2021

The eddy current loss segmentation model of permanent magnet for temperature analysis in high‐speed permanent magnet motor

IET Power Electronics

DOI

2021

Optimal design of the drive motor based on the road condition of the electric vehicle

IET Electric Power Applications

DOI

2021

Rotor Loss and Thermal Analysis of Synchronous Condenser Under Single-Phase Short-Circuit Fault in the Transmission Line

IEEE Transactions on Energy Conversion

DOI

2021

Longitudinal End Effect of Line-Start Permanent Magnet Linear Synchronous Motors

International Symposium on Linear Drives for Industry Applications (LDIA)

DOI

2021

Finite‐element calculation of electromagnetic characteristics and steady‐state stability of dual‐excited synchronous generator

IET Electric Power Applications

DOI

2021

Transient Analysis of Line-Start Permanent Magnet Linear Synchronous Motors

IEEE Transactions on Energy Conversion

DOI

2021

Thermal Analysis of the Solid Rotor Permanent Magnet Synchronous Motors With Air-Cooled Hybrid Ventilation Systems

IEEE Transactions on Industrial Electronics

DOI

2020

大型发电机定子三支路绕组方案集的参数计算

《电机技术》

2020

Research on Discharge Process and Temperature Field of PMSM/G for High Speed Flywheel Energy Storage System

IEEE China International Youth Conference on Electrical Engineering (CIYCEE)

DOI

2020

Calculation and Analysis of the Electromagnetic Field and Temperature Field of the PMSM Based on Fault-Tolerant Control of Four-Leg Inverters

IEEE Transactions on Energy Conversion

DOI

2020

Analyzing regularity of interpolar air motion and heat dissipation coefficient distribution of a salient pole synchronous generator considering rotary airflow

International Communications in Heat and Mass Transfer

DOI

2020

Influence of the opening width of stator semi‐closed slot and the dimension of the closed slot on the magnetic field distribution and temperature field of the permanent magnet synchronous motor

IET Electric Power Applications

DOI

2020

Improvement of Ferromagnetic Bridge Structure of Axial-Radial Flux Type Permanent Magnet Synchronous Machine

IEEE Transactions on Industry Applications

DOI

2020

Heat transfer coefficient distribution in inner surface of stator ventilation duct for large capacity air-cooled turbine generator

Journal of Thermal Analysis and Calorimetry

DOI

2020

Heat transfer analysis of an air-cooled turbine generator Stator under ground-wall insulation multi-direction shelling

Heat and Mass Transfer

DOI

2020

Influence of a Novel Stator Teeth Internal Ventilation Structure on Air-Cooled Turbo-Generator Parameters and Stator Temperature

IEEE Access

DOI

2019

基于旋转弱耦合与强耦合计算方法的大型汽轮发电机转子流体场与温度场研究

《北京交通大学学报》

2019

表贴式永磁同步轮毂电机低速位置检测研究

《电机与控制学报》

2019

计及转子护套与永磁体机械强度的高速永磁同步电机多物理场研究

《北京交通大学学报》

2019

Research on Multi-Physical Fields of High-Power PMSM/G Used for FESS During the Process of Controllable Charging and Uncontrollable Discharging

IEEE Transactions on Energy Conversion

DOI

2019

Sensitivity of Axial Velocity at the Air Gap Entrance to Flow Rate Distribution at Stator Radial Ventilation Ducts of Air-Cooled Turbo-Generator with Single-Channel Ventilation

Energies

DOI

2019

Thermal Barrier for High-Voltage Permanent Magnet Synchronous Motor with Air-cooling Hybrid Ventilation Systems

International Conference on Electrical Machines and Systems (ICEMS)

DOI

2019

Effect of Demagnetization fault on Electromagnetic Field and Related Parameters in Permanent magnet Wind Generator

International Conference on Electrical Machines and Systems (ICEMS)

DOI

2019

Improvement of Ferromagnetic Bridge Structure of Axial-radial flux type fully superconducting synchronous motor

International Conference on Electrical Machines and Systems (ICEMS)

DOI

2019

Study on Heat Exchange of Different Ventilation Structures of Asynchronous Traction Motor for High Speed EMU

Transportation systems and technology

DOI

2019

Influence of incident angle of hydrogen in the ventilation ducts on multi-physical fields of 1100 MW turbine-generator rotor

International Journal of Heat and Mass Transfer

DOI

2019

Influence of Electric Shield Materials on Temperature Distribution in the End Region of a Large Water–Hydrogen–Hydrogen-Cooled Turbogenerator

IEEE Transactions on Industrial Electronics

DOI

2019

Optimization of Ventilation Spacer for Direct-Drive Permanent Magnet Wind Generator

Energies

DOI

2019

Multi-physical fields of rotor windings with axial-radial ventilation system for 1100 MW nuclear half-speed turbine generator

Energy

DOI

2019

Rotor-Position Detection in Permanent-Magnet Wheel Motor to Ensure Smooth Startup From Standstill

IEEE Access

DOI

2018

1100 MW半速汽轮发电机转子绕组电阻率对转子温度场的影响

《电机技术》

2018

The Fluid Flowing and Heat Transfer in a LSPMSM with Rotor Axial-Radial Ventilation System

International Conference on Electrical Machines and Systems (ICEMS)

DOI

2018

Influence of Single/Dual Ventilation Path on Fluid Field and Temperature Field of HVLSSR-PMSM with Air-Cooled Hybrid Ventilation Systems

Energies

DOI

2018

An Innovative Rotor Position Detection at Stand-Still and Low Speed with Carrier Phase-Shifted PWM Method

International Journal of Precision Engineering and Manufacturing

DOI

2018

Analysis of complex fluid flow and temperature field in the turbogenerator end region with magnetic shield structure under underexcitation operation

Applied Thermal Engineering

DOI

2018

Numerical analysis of end part temperature in the turbogenerator end region with magnetic shield structure under the different operation conditions

International Journal of Thermal Sciences

DOI

2018

Influence of sleeve thickness and various structures on eddy current losses of rotor parts and temperature field in surface mounted permanent‐magnet synchronous motor

IET Electric Power Applications

DOI

2018

Three-Dimensional Temperature Field Calculation and Analysis of an Axial-Radial Flux-Type Permanent Magnet Synchronous Motor

Energies

DOI

2018

Research on Stator Main Insulation Temperature Field of Air-Cooled Turbo-Generator after Main Insulation Shelling

Energies

DOI

2018

Influence of Magnetic Permeability of the Press Plate on the Loss and Temperature of the End Part in the End Region of a Turbogenerator

IEEE Transactions on Industrial Electronics

DOI

2018

Influence of Sleeve Material on Electromagnetic Field Based on Multi-Physical Field for Permanent Magnet Synchronous Motor

IEEE International Magnetics Conference

DOI

2018

Influence of Additional Loss in the Rotor Surface on Rotor Temperature Field of 1100MW Half-speed Nuclear Power Turbine Generator

IEEE International Magnetics Conference

DOI

2018

Influence of direct‐connected inverter with one power switch open circuit fault on electromagnetic field and temperature field of permanent magnet synchronous motor

IET Electric Power Applications

DOI

2018

Study on the Influence of Different Rotor Structures on the Axial-Radial Flux Type Synchronous Machine

IEEE Transactions on Industrial Electronics

DOI

2017

变截面转子通风沟对全空冷水轮发电机转子温度场和流体场的影响

《电工技术学报》

2017

电流时间谐波对转子带护套伺服永磁同步电动机温度场的影响

《北京交通大学学报》

2017

水轮发电机转子通风道堵塞时的耦合场分析

《电机与控制学报》

2017

Research on Strategies and Methods Suppressing Permanent Magnet Demagnetization in Permanent Magnet Synchronous Motors Based on a Multi-Physical Field and Rotor Multi-Topology Structure

Energies

DOI

2017

The Research on Correlated Sensitivity Factors of Flux-Regulation Capability for Axial–Radial Flux-Type Synchronous Motor with Hybrid Poles

IETE Journal of Research

DOI

2017

Assessment of the Stray Flux, Losses, and Temperature Rise in the End Region of a High-Power Turbogenerator Based on a Novel Frequency-Domain Model

IEEE Transactions on Industrial Electronics

DOI

2017

Research on the Temperature Field of High-Voltage High Power Line Start Permanent Magnet Synchronous Machines with Different Rotor Cage Structure

Energies

DOI

2017

Numerical calculation of CHTC on end metal parts and flow in end region of a turbogenerator

IET Science Measurement & Technology

DOI

2017

Research on stator winding open circuit faults of permanent magnet wind turbine

International Conference on Electrical Machines and Systems (ICEMS)

DOI

2017

Numerical calculation of the end region of large air-cooled turbo-generator under the single-phase earth fault

International Conference on Electrical Machines and Systems (ICEMS)

DOI

2017

Influence of axial ventilation structures on electromagnetic field and heat transfer of traction motor used for high — Speed EMU

International Conference on Electrical Machines and Systems (ICEMS)

DOI

2017

Calculation of motor electromagnetic field for flywheel energy storage system in discharge mode

International Conference on Electrical Machines and Systems (ICEMS)

DOI

2017

Influence of load on discharge performance of high-speed flywheel energy storage system

International Conference on Electrical Machines and Systems (ICEMS)

DOI

2017

Effect of inverter fault on distribution of electromagnetic field for permanent magnet synchronous motor

International Conference on Electrical Machines and Systems (ICEMS)

DOI

2017

Thermal investigation on HSPM with new alloy sleeve

International Conference on Electrical Machines and Systems (ICEMS)

DOI

2017

Calculation of Temperature Distribution in End Region of Large Turbogenerator Under Different Cooling Mediums

IEEE Transactions on Industrial Electronics

DOI

2017

Power traction and suspension system of maglev train

Transportation systems and technology

DOI

2017

Application of flywheel energy storage and permanent magnet suspension technology

Transportation systems and technology

DOI

2017

Influence of Magnetic slot Wedge Defect on Starting Performance of high voltage line-start permanent magnet synchronous motor

IEEE International Magnetics Conference

DOI

2017

Calculation and analysis of complex fluid flow and thermal fields in a fully air-cooled hydrogenerator

International Journal of Thermal Sciences

DOI

2017

Influence of Rotor Radial Ventilation Ducts Number on Temperature Distribution of Rotor Excitation Winding and Fluid Flow State Between Two Poles of a Fully Air-Cooled Hydro-Generator

IEEE Transactions on Industrial Electronics

DOI

2017

Influence of Stator Parameter Variation and Phase-Shift Under Synchronizing Out of Phase on Turbine Generator Electromagnetic Field

IEEE Transactions on Energy Conversion

DOI

2017

Numerical calculation of primary slot leakage inductance of a Single-sided HTS linear induction motor used for linear metro

Cryogenics

DOI

2016

电枢绕组断路故障对永磁风力发电机电磁场的影响

《北京交通大学学报》

2016

控制策略与载波比对电机损耗与温度场的研究

《电机与控制学报》

2016

磁性槽楔对永磁电机转子损耗及温度场影响

《电机与控制学报》

2016

具有磁性和非磁性槽楔的汽轮发电机转子槽分度的计算与分析

《电机与控制学报》

2016

Research on rotor eddy current fields and temperature fields of high voltage solid rotor PMSM with a novel stator slot wedge

Digest of the Fifth Biennial IEEE Conference on Electromagnetic Field Computation

DOI

2016

PMSM Low Speed Position Detection on Carrier Phase-Shifted PWM Technology

IEEE Vehicle Power and Propulsion Conference (VPPC)

DOI

2016

CQICO and multi-objective thermal optimization for high speed PM generator

Digest of the Fifth Biennial IEEE Conference on Electromagnetic Field Computation

DOI

2016

Erratum to “Influence of Cooling Fluid Parameter on the Fluid Flow and End Part Temperature in End Region of a Large Turbogenerator” [Jun 16 466-476]

IEEE Transactions on Energy Conversion

DOI

2016

Effects of driving modes on permanent magnet motor electromagnetic and temperature fields at limit conditions

COMPEL The International Journal for Computation and Mathematics in Electrical and Electronic Engineering

DOI

2016

Influence of rotor structure on field current and rotor electromagnetic field of turbine generator under out-of-phase synchronization

Digest of the Fifth Biennial IEEE Conference on Electromagnetic Field Computation

DOI

2016

Stator temperature field of large-scale air-cooled turbine generator considering main insulation shelling

Digest of the Fifth Biennial IEEE Conference on Electromagnetic Field Computation

DOI

2016

Influence of magnetic slot wedge on electromagnetic parameters and magnetic field distribution of turbo-generator

Digest of the Fifth Biennial IEEE Conference on Electromagnetic Field Computation

DOI

2016

Transient thermal variation in stator winding of nuclear power turbo‐generator with the inner sudden water brake

IET Science Measurement & Technology

DOI

2016

Analytical analysis of sleeve permeability for output performance of high speed permanent magnet generators driven by micro gas turbines

Applied Mathematical Modelling

DOI

2016

Topology investigation on high speed PM generator with back wound windings

IEEE International Symposium on Industrial Electronics (ISIE)

DOI

2016

Calculation and analysis of complex fluid flow in the multistage fan of a large turbogenerator end region

Applied Thermal Engineering

DOI

2016

Influence of Cooling Fluid Parameter on the Fluid Flow and End Part Temperature in End Region of a Large Turbogenerator

IEEE Transactions on Energy Conversion

DOI

2015

控制器控制方式对永磁电机电磁场影响的研究

《微特电机》

2015

转子通风结构对永磁电机转子流体场和温度场的影响

《北京交通大学学报》

2015

导磁导电复合笼条转子感应电动机性能计算

《电机与控制学报》

2015

不同转子结构对复合笼条转子感应电动机性能的影响

《电机与控制学报》

2015

Investigation on the Influence of Motors Grounding States on Bearing Voltage in Inverter Drive System

Proceedings of the CSEE

2015

Research on the Impact of Screen Properties on Eddy Current and Flux in End Region of a Large Air-Cooled Turbo-Generator

IEEE Transactions on Energy Conversion

DOI

2015

Influences of turbo-generator end winding dimensions on electromagnetic loss in the end core and metal parts

IEEE International Magnetics Conference

DOI

2015

Influence of copper content change in alloy material on performance of induction motor with compound cage rotor

Materials Research Innovations

DOI

2015

Analysis of Three-Dimensional Complex Fluid Flow and Temperature Distribution in the End Region of a Turbogenerator

IEEE Transactions on Industrial Electronics

DOI

2015

A New Approach to Evaluate Influence of Transverse Edge Effect of a Single-Sided HTS Linear Induction Motor Used for Linear Metro

IEEE Transactions on Magnetics

DOI

2015

Influence of magnetic wedge on electromagnetic field distribution of permanent magent traction motor

International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles

DOI

2015

Analyses on heat transfer and fluid flowing in a traction motor used in high-speed CRH

International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles

DOI

2015

Influence of material electromagnetic properties on HTS Linear Induction Motor used in rail transit

International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles

DOI

2015

Research of a new structure of HTS DC Motor

International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles

DOI

2015

Influence of Rectifiers on High-Speed Permanent Magnet Generator Electromagnetic and Temperature Fields in Distributed Power Generation Systems

IEEE Transactions on Energy Conversion

DOI

2014

Modeling of Bearing Capacitance and Resistance in Motor Bearing Current Problem

Proceedings of the CSEE

2014

Electrothermal Combined Optimization on Notch in Air-Cooled High-Speed Permanent-Magnet Generator

IEEE Transactions on Magnetics

DOI

2014

Influence of Underexcitation Operation on Electromagnetic Loss in the End Metal Parts and Stator Step Packets of a Turbogenerator

IEEE Transactions on Energy Conversion

DOI

2014

Calculation and Analysis of the Surface Heat-Transfer Coefficient and Temperature Fields on the Three-Dimensional Complex End Windings of a Large Turbogenerator

IEEE Transactions on Industrial Electronics

DOI

2014

Investigation of a Low-Speed Single-Side HTS Linear Induction Motor With Different Primary Structures Used for Linear Metro

IEEE Transactions on Applied Superconductivity

DOI

2014

Research on Flow Rule and Thermal Dissipation Between the Rotor Poles of a Fully Air-cooled Hydro-generator

IEEE Transactions on Industrial Electronics

DOI

2013

轴径向支架安放角对灯泡贯流式水轮发电机通风结构的影响

《江苏大学学报(自然科学版)》

2013

水轮发电机通风散热系统多场耦合的数值分析

《电机与控制学报》

2013

Influence of Copper Shield Structure on 3-D Electromagnetic Field, Fluid and Temperature Fields in End Region of Large Turbogenerator

IEEE Transactions on Energy Conversion

DOI

2013

Influence of clamping plate permeability and metal screen structures on three-dimensional magnetic field and eddy current loss in end region of a turbo-generator by numerical analysis

Journal of Applied Physics

DOI

2013

Performance Evaluation of a Low-Speed Single-Side HTS Linear Induction Motor Used for Subway System

IEEE Transactions on Magnetics

DOI

2013

Influence of the End Ventilation Structure Change on the Temperature Distribution in the End Region of Large Water–Hydrogen–Hydrogen Cooled Turbogenerator

IEEE Transactions on Energy Conversion

DOI

2013

Influence of Copper Screen Thickness on Three-Dimensional Electromagnetic Field and Eddy Current Losses of Metal Parts in End Region of Large Water-Hydrogen–Hydrogen-Cooled Turbogenerator

IEEE Transactions on Industrial Electronics

DOI

2013

Influence of Rotor-Sleeve Electromagnetic Characteristics on High-Speed Permanent-Magnet Generator

IEEE Transactions on Industrial Electronics

DOI

2013

Analyses on Electromagnetic and Temperature Fields of Superhigh-Speed Permanent-Magnet Generator With Different Sleeve Materials

IEEE Transactions on Industrial Electronics

DOI

2013

Numerical Calculation and Analysis of Three-Dimensional Transient Electromagnetic Field in the End Region of Large Water–Hydrogen–Hydrogen Cooled Turbogenerator

IEEE Transactions on Industrial Electronics

DOI

2012

超临界汽轮发电机定子股线堵塞对温度分布的影响

《电机与控制学报》

2012

高压永磁同步电动机永磁体隔热分析

《电机与控制学报》

2012

大型汽轮发电机空实心股线涡流损耗分布与温度场的计算方法

《中国电机工程学报》

2012

不同工况下永磁同步风力发电机饱和同步电抗的计算与分析

《防爆电机》

2012

Influence of Rotation on Rotor Fluid and Temperature Distribution in a Large Air-Cooled Hydrogenerator

IEEE Transactions on Energy Conversion

DOI

2012

Influence of Metal Screen Materials on 3-D Electromagnetic Field and Eddy Current Loss in the End Region of Turbogenerator

IEEE Transactions on Magnetics

DOI

2012

Calculation of Ventilation Cooling, Three-Dimensional Electromagnetic Fields, and Temperature Fields of the End Region in a Large Water–Hydrogen–Hydrogen-Cooled Turbogenerator

IEEE Transactions on Industrial Electronics

DOI

2012

Thermal analysis of high speed permanent magnetic generator

Science China Technological Sciences

DOI

2012

Influence of Copper Plating on Electromagnetic and Temperature Fields in a High-Speed Permanent-Magnet Generator

IEEE Transactions on Magnetics

DOI

2012

Thermal Optimization for a HSPMG Used for Distributed Generation Systems

IEEE Transactions on Industrial Electronics

DOI

2011

超导同步电动机温度场计算与分析

《电机与控制学报》

2011

基于流体传热理论永磁风力发电机温度场计算

《电机与控制学报》

2011

大型水轮发电机阻尼条数对电磁参数和附加损耗的影响

《电机与控制学报》

2011

磁极不等厚对兆瓦级永磁直驱风力发电机的影响

《大电机技术》

2011

汽轮发电机定子绕组异结构饱和参数与温度场计算

《电机与控制学报》

2011

定子结构型式对高速永磁发电机电磁性能影响

《电机与控制学报》

2011

汽轮发电机不同冷却介质对定子传热特性的影响

《电机与控制学报》

2011

离网式风力发电机电磁与传热特性计算分析

《防爆电机》

2011

高速永磁发电机冷却流道结构双维度连续量子蚁群优化的温度场计算

《中国电机工程学报》

2010

大型空冷汽轮发电机定子通风结构优化方案的计算与分析

《中国电机工程学报》

2010

不同转子结构离网型永磁同步发电机的电磁性能分析

《防爆电机》

2010

不同转子结构的永磁半直驱同步风力发电机电磁场的计算与分析

《防爆电机》

2010

离网型永磁同步发电机电磁场和温度场数值计算与分析

《中国电机工程学报》

2010

前苏联核电1000MW四极汽轮发电机设计制造技术与运行效果

《大电机技术》

2010

1.5MW永磁风力发电机电磁场与温度场计算与分析

《电机与控制学报》

2010

高压永磁同步电动机转子不同结构的起动性能分析

《电机与控制学报》

2010

高性能低谐波绕组感应电动机电磁性能的数值分析

《电机与控制学报》

2010

俄罗斯核电1000MW两极和四极汽轮发电机特性对比

《电机与控制学报》

2009

无槽盘式永磁风力发电机有限元分析

《防爆电机》

2009

铁耗和环流损耗分布对定子温度场及绝缘外表面散热系数计算的影响

《中国电机工程学报》

2009

空冷汽轮发电机冷却气流风量对定子内流体的影响

《中国电机工程学报》

2009

汽轮发电机不对称绕组结构下的绝缘温降计算与分析

《大电机技术》

2009

多风路空冷汽轮发电机定子内流体流动与传热耦合计算与分析

《电工技术学报》

2008

次级对直线感应电动机性能的影响

《电机与控制学报》

2008

笼式无刷双馈风力发电机的设计及仿真分析

《电机与控制应用》

2007

场路耦合双馈感应风力发电机负载性能的分析与计算

《微电机》

2007

异步变频电机发展综述

《微电机》

2007

永磁同步电动机发展展望

《微电机》

2007

永磁无刷直流电动机时步有限元与Matlab协同仿真计算

《微电机》

2007

屏蔽电机屏蔽损耗与电机性能的计算与分析

《哈尔滨工业大学学报》

2007

转子槽形及材料对复合笼条转子感应电动机运行性能的影响

《电机与控制学报》

2007

实心转子永磁同步电动机起动性能

《电机与控制学报》

2007

变速恒频双馈感应发电机的空载特性

《电机与控制学报》

2007

变频电机恒转矩运行时的电磁计算与分析

《防爆电机》

2006

三相异步起动永磁同步电动机起动特性

《电机与控制学报》

2006

游梁式抽油机用节能电机性能的计算模型

《电机与控制学报》

2006

3Y/3Y变极电机的绕组设计和转子槽漏抗计算法

《电机与控制学报》

2006

感应电机定子温度场的数值计算

《电机与控制学报》

2006

感应电机运行时的定子温度场分析与计算

《防爆电机》

2006

发电机内部冷却气流状态对定子温度场的影响

《中国电机工程学报》

2006

大型同步发电机排间绝缘对定子三维温度场的影响

《哈尔滨工业大学学报》

2006

排间绝缘故障引起电机定子热问题的分析及诊断

《大电机技术》

2006

笼型感应电机转子断条故障诊断方法

《仪器仪表学报》

2006

大型发电机定子排间绝缘老化的热性能分析

《现代电力》

2006

电网波动下双馈风力发电励磁系统的仿真分析

《现代电力》

2006

笼型异步电机转子断条故障的有限元分析

《电机与控制应用》

2005

直线感应电动机稳态运行特性的有限元分析

《电机与控制学报》

2005

直线感应电动机起动性能的有限元计算与分析

《微特电机》

2005

凸极同步电动机起动时电磁场数值计算

《大电机技术》

2005

游梁式抽油机专用高起动转矩节能电机的起动性能计算

《防爆电机》

2005

新型多星形移相变极电机中定子绕组附加环流损耗的计算方法

《防爆电机》

2005

大型电机定子三维流体场计算及其对温度场分布的影响

《中国电机工程学报》

2005

复合笼条转子感应电动机不同转子材料特性对起动性能的影响

《中国电机工程学报》

2004

电网电压偏差对水轮发电机转子温度场的影响

《哈尔滨工业大学学报》

2004

直线感应电动机起动性能的有限元计算

《防爆电机》

2003

水轮发电机气隙内磁场和转子温度场计算

《哈尔滨工业大学学报》

2003

大型发电机定子绝缘老化后非线性温度场计算

《哈尔滨工业大学学报》

2003

凸极同步发电机空载下的气隙磁场波形特征系数及转子温度场的数值计算

《大电机技术》

2002

大型水轮发电机定子绕组内股线绝缘热老化下的定子温度场计算

《大电机技术》

2002

复合笼条转子异步电动机起动过程的仿真分析

《微特电机》

2002

发电机定子绝缘老化故障的诊断和数值模拟

《哈尔滨工业大学学报》

2001

绝缘老化对大型水轮发电机定子最热段温度场的影响

《大电机技术》

2001

涡流分布对大型同步发电机定子温度场的影响

《大电机技术》

2001

基于涡流分布系数法的发电机定子温度场计算

《哈尔滨工业大学学报》

2000

汽轮发电机径切两向空冷系统转子温度场的计算方法

《中国电机工程学报》

2000

大型水轮发电机定子三维温度场的等参元计算

《大电机技术》

1999

大型水轮发电机定子径向通风沟与散热

《大电机技术》

1999

中型高压防爆电机定子三维温度场的计算

《电机与控制应用》

1998

匝间绝缘对水轮发电机转子最热段温度场的影响

《哈尔滨理工大学学报》

1997

股线绝缘对水轮发电机定子绕组最热段温度的影响

《电机与控制学报》