百晓学者学者目录

程晓农

江苏大学材料科学与工程学院

精选作品

期刊论文

  1. 刘瑜,刘安国,姜欣欣,王锋,邵新中,杨苏冰,杨程,罗锐,庄建新,程晓农(2026). 基于冷轧与热处理的UNS N06625镍基合金无缝管成套制备工艺. 《现代交通与冶金材料》.
  2. 赵钱钱,郑力赫,王紫琪,丁恒楠,曹甫洋,杨程,罗锐,程晓农(2026). 热作模具钢制备工艺与强韧化行为关联性研究进展. 《金属热处理》.
  3. 鞠玉琳,魏琪,袁志钟,程晓农(2025). 低合金高强钢板贝/马复相回火过程硬度及微观组织的演变行为. 《金属学报》.
  4. 付佳乐,倪豪豪,郭顺,翟绍康,刘海霞,刘光磊,沈宝国,程晓农(2025). 淬火-回火工艺对圆盘耙片用27MnCrB5钢组织性能的影响. 《材料热处理学报》.
  5. 张亮,Akyea Ntriwaa Audrey,许福海,刘光磊,李志强,陶诚,程晓农(2025). 不同热处理状态真空压铸铝合金的高温摩擦磨损行为. 《材料热处理学报》.
  6. 袁志钟,牛宗冉,王致远,鞠玉琳,徐辉霞,廖俊,于洋,程晓农(2025). 固溶时间对D41A粉末不锈钢组织及性能的影响. 《金属热处理》.DOI
  7. 李志强,刘光磊,丁冉,许福海,陶诚,刘海霞,程晓农(2025). 深冷-固溶-时效强化真空压铸铝合金的腐蚀行为. 《金属热处理》.DOI
  8. 沈宝国,付佳乐,郭顺,倪豪豪,翟绍康,王宸煜,刘海霞,程晓农(2025). 27MnCrB5钢的配分工艺. 《金属热处理》.DOI
  9. Heng Liu, Rui Luo, Qiang Yao, Xuefei Chen, Yu Liu, Cheng Yang, Xin-Zhong Shao, Xiu-Li Hou, Yi-Ming Zhou, Xiaonong Cheng (2025). A Study on the Hot Deformation and Recrystallization Behavior of a Novel Ni-Fe-Cr Superalloy at Ultra-Supercritical Conditions. Materials Today Communications.DOI
  10. Zhizhong Yuan, Yulin Ju, Mingrui Yang, Xiaonong Cheng (2025). Microstructure and hardness evolution for LB/M microstructures in a hot working die steel. Heat Treatment and Surface Engineering.DOI
  11. 杨雨童,黄诗尧,郑江,杨莉,程晓农,陈睿凯,韩维建(2024). 孔隙和α-Al(Fe/Mn)Si相对高压压铸Al-7Si-0.2Mg合金塑性的影响(英文). Transactions of Nonferrous Metals Society of China.
  12. 王稳,程晓农,苗现华,倪聪,贾海涛,刘超杰,蒋沁洋,丁恒楠,罗锐(2024). 预回火工艺对H13钢组织和性能的影响. 《机械工程材料》.
  13. 王爽,王资兴,程晓农,罗锐(2024). 稀土La对钴基高温合金GH5188在1100℃下空气中氧化行为的影响. 《中国腐蚀与防护学报》.
  14. 崔力云,刘庆涛,罗锐,钱喜根,丁恒楠,孙希,赵小桃,刘恒,程晓农(2024). 固溶处理对022Cr22Ni5Mo3N双相不锈钢组织及低温冲击性能的影响. 《金属热处理》.
  15. 袁志钟,刘海明,鞠玉琳,陈露,牛宗冉,王致远,曹甫洋,程晓农(2024). 亚临界热处理对高铬铸铁组织及性能的影响. 《金属热处理》.
  16. 陈乐利,高佩,罗锐,程晓农,孟宪凯(2024). 通过再结晶退火实现剪切-压缩变形态GH4169高温合金的显微组织均匀化(英文). 《稀有金属材料与工程》.
  17. 许福海,刘光磊,丁冉,李志强,陶诚,郭顺,刘海霞,程晓农(2024). 深冷、固溶和时效处理对真空压铸铝合金摩擦磨损性能的影响. 《摩擦学学报(中英文)》.
  18. 袁志钟,陈露,张伯承,刘海明,牛宗冉,王致远,鞠玉琳,程晓农(2024). LB/M复相热处理工艺对冷作模具钢DC53组织和力学性能的影响. 《特殊钢》.
  19. 侯艳嫔,吴亭慧,郭顺,刘海霞,程晓农(2024). 具有bcc结构的β型钛或锆系合金的低模量机制. 《稀有金属》.
  20. Cheng Tao, Xiaonong Cheng, Fu-hai Xu, Guang-Lei Liu, Zhi-Qiang Li, Shukuan Xie, Z. Kuang, Yong Guo, Haixia Liu (2024). Optimization and analysis of die-casting Al alloy solid solution process based on response surface model and NSGA-2 algorithm. Materials Express.DOI
  21. Zeng Xia, Wei Wang, Shaokang Zhai, Shun Guo, Peng Lv, Guang-Lei Liu, Hai-Xia Liu, Xiaonong Cheng (2024). Near-linear deformation behavior of quasi-Gum Metal with composition Ti-18.4Nb-1.4Zr-0.3Ta-4.3 O. Journal of Alloys and Compounds.DOI
  22. Wei Wang, Shun Guo, H. Ni, Baoguo Shen, Guang-Lei Liu, Hai-Xia Liu, Xiaonong Cheng (2024). The mechanism for the superior isotropic mechanical properties attained in a cross rolling TiNb alloy. Materials Science & Engineering: A.DOI
  23. Guang-lei Liu, Xiao-xuan Sun, Yi-yuan Cai, Zhiqiang Li, Fu-hai Xu, Yuhao Cao, Haixia Liu, Jianzhong Zhou, Xiaonong Cheng (2024). High-temperature dry sliding friction and wear behavior of Ni60A coating on the 20CrNiMo alloy surface treated by laser shock peening and its bonding zone. Journal of Materials Research and Technology.DOI
  24. Yu-tong YANG, Shiyao Huang, Jiang Zheng, Li Yang, Xiaonong Cheng, R.C. Chen, HAN Wei-jian (2024). Effect of porosity and α-Al(Fe/Mn)Si phase on ductility of high-pressure die-casting Al−7Si−0.2Mg alloy. Transactions of Nonferrous Metals Society of China.DOI
  25. 袁志钟,王梦飞,段旭斌,杨海峰,李表敏,罗锐,赵小强,程晓农(2023). 热处理对42CrMo钢截齿微观组织与力学性能的影响. 《金属热处理》.
  26. 袁志钟,王梦飞,张伯承,段旭斌,李表敏,杨海峰,罗锐,程晓农(2023). 冷作模具钢SKD11的热处理增韧技术. 《金属热处理》.
  27. 陶诚,程晓农,许福海,李志强,刘光磊,谢树宽,匡中华,郭勇,吕鹏(2023). 基于响应曲面模型和Matlab遗传算法的压铸铝硅合金时效工艺优化及分析. 《材料热处理学报》.
  28. 陶诚,程晓农,李志强,许福海,刘光磊,谢树宽,匡中华,郭勇,吕鹏(2023). 深冷处理对压铸铝硅合金力学性能与微观组织的影响. 《铸造》.
  29. 邵红红,刘凡,李承龙,赵恩旭,杨柳,程晓农(2023). 12Cr13马氏体不锈钢B/C化学热处理的研究. 《材料保护》.
  30. 蒋沁洋,丁恒楠,罗锐,周易名,程晓农(2023). 改进型H13钢的微观形貌及高温性能. 《钢铁研究学报》.
  31. 于森,陈乐利,罗锐,袁志钟,王爽,高佩,程晓农(2023). 高温合金GH4169的动态再结晶和组织演化机制. 《材料研究学报》.
  32. 杨柳,谢奕心,鞠玉琳,魏琪,曹甫洋,罗锐,袁志钟,程晓农(2023). 贝氏体等温淬火对Dievar热作模具钢高温摩擦磨损性能的影响. 《金属热处理》.
  33. Shun Guo, Wei Wang, Wang Ding, Hao Huang, Hai-Xia Liu, Xiaonong Cheng (2023). In-situ EBSD study of the multiple deformation modes of a TiNb/Nb/NiTi multilayer composite. Materials Characterization.DOI
  34. Rui Luo, Qing-Tao Liu, P. Gao, Tian Liu, H. Ding, Di Zhang, Yun Cao, Xiaonong Cheng (2023). Effect of Microstructural Evolution and Mechanical Properties of Haynes 230 Superalloy During Long-term Aging at 700 °C. Journal of Alloys and Compounds.DOI
  35. Wei Wang, Shu-Mei Guo, W. Ding, Hao Huang, Hai-Xia Liu, Xiaonong Cheng (2023). The mechanism of multi-directional Invar effect in a Cross-rolling TiNb alloy. Journal of Alloys and Compounds.DOI
  36. H. Ding, Zhizhong Yuan, Tian Liu, Leli Chen, Yi-Ming Zhou, Yun Cao, Fu-Yang Cao, Rui Luo, Xiaonong Cheng (2023). Microstructure and high-temperature tensile behavior of modified H13 steel with the addition of tungsten, molybdenum, and lowering of chromium. Materials Science & Engineering: A.DOI
  37. Tian Liu, Xiaonong Cheng, Hengnan Ding, Leli Chen, Qian Wang, Di Zhang, Rui Luo (2023). Microstructure and microtexture evolution of dynamic recrystallization of a Ni-based superalloy under high-throughput gradient thermal compression. Materials Science and Engineering A.DOI
  38. Qi Zheng, Tian Liu, Jiabo Wei, Rui Luo, Yiming Zhou, Hengnan Ding, Leli Chen, Di Zhang, Xiaonong Cheng (2023). Temperature dependence in tensile properties and deformation behavior of GH4169 alloy. Journal of Iron and Steel Research International.DOI
  39. Forthan Umba Mikombe, Zhizhong Yuan, Ching‐Tun Peng, Rui Luo, Xiaonong Cheng, Leli Chen, Xubin Duan, Chanez Maouche (2023). Hot working processing and microstructure characterisation of as-cast high manganese TWIP steel. Advances in Materials and Processing Technologies.DOI
  40. Cheng Tao, Xiaonong Cheng, Zhiqiang Li, Guanglei Liu, Fu-hai Xu, Shu-Kuan Xie, Zhiwei Kuang, Yong Zhen Guo, Haixia Liu (2023). Mechanism of cryogenic, solid solution and aging compound heat treatment of die‐cast Al alloys considering microstructure variation. Rare Metals.DOI
  41. Wen Ma, Hao Huang, Wang Ding, Shun Guo, Haixia Liu, Xiaonong Cheng (2023). Near‐linear elastic deformation behavior of a novel Zr‐Ti‐Nb‐Sn alloy with multi‐phase microstructures of β, α″ and α′ phases. Rare Metals.DOI
  42. 杨成康,程晓农,蒋沁洋,丁恒楠(2022). 回火处理对Cr-W-Mo系改进型H13钢的微观形貌及高温性能的影响. 《现代交通与冶金材料》.
  43. 郭幼丹,程晓农(2022). 二次急冷淬火成形SAF2507双相不锈钢螺旋桨在SRB+IOB海水中的腐蚀行为. 《稀有金属材料与工程》.
  44. 刘昱君,程晓农,罗锐,高佩(2022). 热处理工艺对Inconel 617合金管组织性能的影响. 《金属热处理》.
  45. 周宇森,程晓农,罗锐,高佩,刘瑜,袁志钟(2022). Inconel 600合金的微观组织及其热加工图. 《金属热处理》.
  46. 段旭斌,吴宇宁,袁志钟,王梦飞,卿海标,钟成铭,罗锐,程晓农(2022). 溅射靶材用Cr20Ni80合金管材的微观组织与再结晶退火. 《金属热处理》.
  47. 罗锐,曹赟,邱宇,袁志钟,李绍伟,程晓农(2022). 喷射沉积态Al-Zn-Mg-Cu合金的高温变形行为及组织演变. 《稀有金属》.
  48. 郑琦,袁飞,杜京伦,蒋沁洋,丁恒楠,程晓农(2022). 热处理对W-Mo-V系改进型热作模具钢组织及力学性能的影响. 《材料热处理学报》.
  49. 罗锐,谭莉,陈乐利,陈佳宇,刘玉,高佩,程晓农(2022). 核电厂反应堆压力容器O型密封管用GH4169合金的热加工性能及组织演变. 《压力容器》.
  50. Qian Wang, Tian Liu, Tan Li, Xiaonong Cheng, Zhizhong Yuan, Yulin Ju, Fuyang Cao, Hengnan Ding, Leli Chen, Baosen Zhang, Rui Luo (2022). Investigation of isothermal continuous hot deformation behavior of the new as-cast alumina-forming austenitic alloy. Journal of Alloys and Compounds.DOI
  51. Yixin Xie, Shanshan Si, Yu-Lin Ju, Rui Luo, Lei Zhou, Xiaonong Cheng (2022). Carbide evolution for a quenched and tempered Dievar steel. Materials Science and Technology.DOI
  52. Rui Luo, Yuyan Yang, Yun Fei Cao, Zhou Zhou, Hengnan Ding, Tian Liu, Yiming Zhou, Yu Liu, Yu Qiu, Yu Cao, Baosen Zhang, Xiaonong Cheng (2022). Hot workability of a spray formed 2195 aluminum‑lithium alloy based on an improved isothermal processing map and DRX ‘C-curve’. Materials Characterization.DOI
  53. Leli Chen, Rui Luo, Pei Gao, Tian-wei Yin, Hui-xia Hao, Donghua Sheng, Tian Liu, Hengnan Ding, Yu Cao, Baosen Zhang, Xiaonong Cheng (2022). Dynamic recrystallization behavior and coincidence site lattice evolution in thermal deformation of 316H stainless steel used in nuclear systems. Journal of Iron and Steel Research International.DOI
  54. Hengnan Ding, Tian Liu, Jiabo Wei, Leli Chen, Fuyang Cao, Baosen Zhang, Rui Luo, Xiaonong Cheng (2022). Microstructure and tempering softening mechanism of modified H13 steel with the addition of Tungsten, Molybdenum, and lowering of Chromium. Materials & Design.DOI
  55. Yixin Xie, Xiaonong Cheng, Jiabo Wei, Rui Luo (2022). Characterization of Carbide Precipitation during Tempering for Quenched Dievar Steel. Materials.DOI
  56. Shun Guo, Ding Wang, Tinghui Wu, Wen Ma, Baoguo Shen, Haixia Liu, Xiaonong Cheng (2022). Micromechanical behavior of TiNb/NiTi composite during a pre‐straining process: an in situ synchrotron investigation. Rare Metals.DOI
  57. Leli Chen, Rui Luo, Xiuli Hou, Yonghuan Yang, Jiayi Sun, Tian Liu, Hengnan Ding, Yuanxiang Zhang, Yu Cao, Pei Gao, Xiaonong Cheng (2022). Shear-compression flow behavior and thermoforming properties of GH4169 superalloy. Journal of Materials Processing Technology.DOI
  58. Tian Liu, Qi Zheng, Xiaonong Cheng, Rui Luo, Yuanxiang Zhang, Hengnan Ding, Leli Chen, Pei Gao, Qian Wang, Baosen Zhang (2022). Effect of recrystallization annealing on microstructure and tensile properties of Inconel 617B alloy cold rolled pipes. Materials Science and Engineering A.DOI
  59. Shun Guo, Wang Ding, Minkyung Kwak, Guanglei Liu, Haixia Liu, Xiaonong Cheng, Yang Zhao, Xinqing Zhao (2022). Deformation mechanisms of a novel multiphase Zr–30Ti–7Nb–4Sn alloy consisting of β, α′ and α″ phases. Materials Today Advances.DOI
  60. Hengnan Ding, Xiaonong Cheng, Tian Liu, Fuyang Cao, Leli Chen, Rui Luo, Yuanxiang Zhang, Baosen Zhang (2022). Microstructure and high-temperature tensile behavior of spray-formed modified 2000MPa H13 hot work die steel with 0.5wt % carbon. Materials Science and Engineering A.DOI
  61. Shun Guo, Wang Ding, Huihui Zhang, Weiqun Lu, Guanglei Liu, Haixia Liu, Xiaonong Cheng, Xinqing Zhao (2022). Mechanisms of near-linear elastic deformation behavior in a binary metastable β-type Ti-Nb alloy with large recoverable strain. Materials Characterization.DOI
  62. 李婧晗,宋亚乘,周亚洲,程晓农,杨娟(2021). 氮掺杂泡沫碳电催化剂的制备及氧还原性能. 《无机化学学报》.
  63. 周宇森,程晓农,罗锐,高佩,刘瑜,袁志钟(2021). 基于热加工图与有限元分析的Inconel 600热挤压工艺研究. 《压力容器》.
  64. 杨成康,程晓农,张洁,鞠玉琳,罗锐,丁恒楠(2021). W-Mo-V改进型H13模具钢的力学性能与磨损行为. 《金属热处理》.
  65. 罗锐,周皓天,陈乐利,曹赟,程晓农,高佩(2021). 高温合金NiCr22Mo9Nb的热塑性行为与加工图研究. 《稀有金属》.DOI
  66. 李骁,程晓农,徐桂芳,杨成康,陈乐利(2021). 退火工艺对3003铝合金板微观组织与力学性能的影响. 《金属热处理》.
  67. 罗锐,曹赟,邱宇,崔树刚,周皓天,周易名,袁飞,张肖佩佩,程晓农(2021). 基于BP人工神经网络喷射成形7055铝合金的本构模型. 《航空材料学报》.
  68. Yanli Li, Xuehua Yan, Wenjing Angela Zhang, Wending Zhou, Yihan Zhu, Mengyang Zhang, Wen Zhu, Xiaonong Cheng (2021). Hierarchical micro-nano structure based NiCoAl-LDH nanosheets reinforced by NiCo2S4 on carbon cloth for asymmetric supercapacitor. Journal of Electroanalytical Chemistry.DOI
  69. Leli Chen, Hengnan Ding, Tian Liu, Rui Luo, Yun Fei Cao, Yuanxiang Zhang, Yu Liu, Fei Yuan, Yu Qiu, Shu-gang Cui, Yu Cao, Xiaonong Cheng (2021). Thermal deformation behavior and microstructure evolution of GH4169 superalloy under the shear-compression deformation conditions. Materials & Design.DOI
  70. Tian Liu, Hengnan Ding, Rui Luo, Leli Chen, Yu Cao, Xiaonong Cheng (2021). Hot Deformation Characteristics and Dynamic Recrystallization Mechanisms of a Newly Developed Austenitic Heat-Resistant Alloy. Metallurgical and Materials Transactions A.DOI
  71. Tian Liu, Xiaonong Cheng, Rui Luo, Yu Cao, Hengnan Ding, Leli Chen, Qian Wang, Baosen Zhang (2021). Evolution of strain-induced precipitates in Inconel 617B alloy and their effect on flow behavior. Journal of Alloys and Compounds.DOI
  72. Shun Guo, Tinghui Wu, Minkyung Kwak, Weiqun Lu, Wen Ma, Qing Huo Liu, Haixia Liu, Qingkun Meng, Guanglei Liu, Xiaonong Cheng, Xinqing Zhao (2021). Achieving a combination of decent biocompatibility and large near-linear-elastic deformation behavior in shell-core-like structural TiNb/NiTi composite. Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials.DOI
  73. Pei Gao, Leli Chen, Rui Luo, Ching‐Tun Peng, Donghua Sheng, Tian Liu, Xiaonong Cheng (2021). Investigation of Hot Working Performance and Microstructure Evolution of GH1059 Superalloy Based on Processing Map. Transactions of the Indian Institute of Metals.DOI
  74. Wenjing Angela Zhang, Xiaoxue Yuan, Xuehua Yan, Mingyu You, Hui Jiang, Jieyu Miao, Yanli Li, Wending Zhou, Yihan Zhu, Xiaonong Cheng (2021). Tripotassium citrate monohydrate derived carbon nanosheets as a competent assistant to manganese dioxide with remarkable performance in the supercapacitor. Frontiers of Chemical Science and Engineering.DOI
  75. Shun Guo, Wei Wang, Baoguo Shen, Tan Li, Haixia Liu, Wen Ma, Zhong-Min Xie, Xiaonong Cheng, Ping An Shi (2021). Uniaxial tensile deformation behavior of a sandwich‐like structural TiNb‐NiTi composite for biomedical applications. Rare Metals.DOI
  76. Tian Liu, Xiaonong Cheng, Rui Luo, Yu Cao, Hengnan Ding, Leli Chen, Yuyan Yang, Yu Liu (2021). Plastic thermal deformation behavior and microstructure evolution of solid solution strengthened Ni-based superalloy. Materials Science and Engineering A.DOI
  77. Rui Luo, Yun Fei Cao, Shu-gang Cui, Yu Cao, Ching‐Tun Peng, Yuyan Yang, Tian Liu, Leli Chen, Yiming Zhou, Yu Qiu, Yanjin Xu, Xiaonong Cheng (2021). An Improved Constitutive Model Based on BP Artificial Neural Network and 3D Processing Maps of a Spray-Formed Al–Cu–Li Alloy. Transactions of the Indian Institute of Metals.DOI
  78. Rui Luo, Yun Fei Cao, Huakang Bian, Leli Chen, Ching‐Tun Peng, Fuyang Cao, Lingxiao Ouyang, Yu Qiu, Yanjin Xu, Aikihiko Chiba, Xiaonong Cheng (2021). Hot workability and dynamic recrystallization behavior of a spray formed 7055 aluminum alloy. Materials Characterization.DOI
  79. Wending Zhou, Xuehua Yan, Wenjing Angela Zhang, Yanli Li, Yihan Zhu, Mengyang Zhang, Wen Zhu, Xiaonong Cheng (2021). Tailored synthesis of nano-corals nickel-vanadium layered double hydroxide@Co2NiO4 on nickel foam for a novel hybrid supercapacitor. Journal of Energy Storage.DOI
  80. Yihan Zhu, Dongfeng Wang, Xuehua Yan, Yanli Li, Wending Zhou, Wenjing Angela Zhang, Xiaonong Cheng (2021). Vertical, dense and uniform V2O5 nanoneedle arrays on carbon foam for boosting electrochemical performance. Journal of Energy Storage.DOI
  81. Wenqiang Zhong, Haoyu Sun, Jianmei Pan, Yahai Zhang, Xuehua Yan, Yi Guan, Wei Hua Shen, Xiaonong Cheng (2021). Hierarchical porous TiO2/carbide-derived carbon for asymmetric supercapacitor with enhanced electrochemical performance. Materials Science in Semiconductor Processing.DOI
  82. Chao Zeng Cheng, Yi Lut Li, Chanez Maouche, Bing Li, Yazhou Zhou, Shuang Wang, Xiaonong Cheng, Juan Yang (2021). Green synthesis of N, P-co doped porous reduced graphene oxide as an active metal-free electrocatalyst toward oxygen reduction reaction. Journal of Electroanalytical Chemistry.DOI
  83. Jieyu Miao, Chen Zhou, Xuehua Yan, Hui Jiang, Mingyu You, Yihan Zhu, Yanli Li, Wending Zhou, Xiaonong Cheng (2021). Electrochemical Performance of an Asymmetric Coin Cell Supercapacitor Based on Marshmallow-like MnO 2 /Carbon Cloth in Neutral and Alkaline Electrolytes. Energy & Fuels.DOI
  84. Rui Luo, Leli Chen, Yuanxiang Zhang, Yu Cao, Ching‐Tun Peng, Yuyan Yang, Tian Liu, Qi Zheng, Xiaonong Cheng (2021). Characteristic and mechanism of dynamic recrystallization in a newly developed Fe-Cr-Ni-Al-Nb superalloy during hot deformation. Journal of Alloys and Compounds.DOI
  85. Yunyan Wu, Pan Xiong, Jianchun Wu, Zengliang Huang, Jingwen Sun, Qinqin Liu, Xiaonong Cheng, Juan Yang, Junwu Zhu, Yazhou Zhou (2021). Band Engineering and Morphology Control of Oxygen-Incorporated Graphitic Carbon Nitride Porous Nanosheets for Highly Efficient Photocatalytic Hydrogen Evolution. Nano-Micro Letters.DOI
  86. 程晓农,陈乐利,张肖佩佩,袁飞,崔树刚,杨玉艳,高佩,刘天,杨柳,罗锐(2020). 第四代核能系统换热管用Inconel 617B的热加工性能与组织特性. 《压力容器》.
  87. 罗锐,陈乐利,程晓农,杨玉艳,袁飞,崔树刚,张肖佩佩,曹赟,刘天,高佩(2020). 高温合金Inconel 617B的热变形及动态再结晶行为. 《压力容器》.
  88. 张洁,程晓农,罗锐,刘明(2020). 碳化硼对高熵合金结构及性能的影响. 《金属热处理》.DOI
  89. 李洋城,程晓农,罗锐,韦家波,张洁,高天明(2020). 热疲劳对B/M复相H13钢组织及力学性能的影响. 《金属热处理》.DOI
  90. 高佩,程晓农,罗锐(2020). 超高温气冷堆中间换热器用Haynes 230合金的热拉伸行为研究. 《塑性工程学报》.
  91. 刘天,罗锐,程晓农,郑琦,陈乐利,王茜(2020). 形成Al2O3表层的奥氏体不锈钢加速蠕变实验研究. 《金属学报》.
  92. 戴俭,徐桂芳,程晓农,罗锐,顾晓栋(2020). 高氮钢的热加工图及动态再结晶模型. 《热加工工艺》.DOI
  93. 韦家波,程晓农,张伯承,张洁,李洋城,罗锐,袁志钟(2020). 硬岩掘进盾构机刀圈的热处理. 《金属热处理》.
  94. 程晓农,桂香,罗锐,徐桂芳,袁志钟,周宇森,高佩(2020). 新型奥氏体耐热钢CHDG-A的动态再结晶行为及其动力学模型. 《材料研究学报》.
  95. 高天明,程晓农,罗锐,郑琦,李洋城,王威(2020). 时效处理对GH4169合金显微组织及高温拉伸变形行为的影响. 《金属热处理》.
  96. 高佩,程晓农(2020). 固溶处理对GH984G合金冷轧无缝管组织及硬度的影响. 《机械工程材料》.
  97. 袁志钟,崔树刚,罗锐,程晓农,陈乐利,曹赟,高佩,韩敏,裴昌磊(2020). 57Ni-22Cr-14W-2Mo高温合金的高温本构模型及微观组织演化. 《塑性工程学报》.
  98. Shun Guo, Huihui Zhang, Yueliang Chen, Qing Liu, Ruitang Wu, Wen Ma, Haixia Liu, Qingkun Meng, Guanglei Liu, Xiaonong Cheng, Xinqing Zhao (2020). A sandwich-structured Nb/NiTi composite with good bio-compatibility, near-linear-elastic deformation and large elastic admissible strain. Composites Part B Engineering.DOI
  99. Shun Guo, Ruitang Wu, Yulu Shi, Yan-Pin Hou, Wen Ma, Guanglei Liu, Haixia Liu, Xiaonong Cheng (2020). In situ synchrotron X‐ray diffraction analysis of deformation behavior of a Nb/NiTi composite for biomedical applications. Rare Metals.DOI
  100. Qi Zheng, Leli Chen, Rui Luo, Yu Qiu, Ching‐Tun Peng, Tian Liu, Shu-gang Cui, Yun Fei Cao, Pei Gao, Xiaonong Cheng (2020). Critical Dynamic Recrystallization Model and Nucleation Mechanisms of an Alumina-Forming Austenitic Stainless Steel during Hot Deformation. Transactions of the Indian Institute of Metals.DOI
  101. Yihan Zhu, Dongfeng Wang, Xuehua Yan, Yanli Li, Wending Zhou, Xiaonong Cheng, Baogui Geng (2020). Rational Design for Mn3O4@carbon Foam Nanocomposite with 0D@3D Structure for Boosting Electrochemical Performance. Energy & Fuels.DOI
  102. Hui Jiang, Chen Zhou, Xuehua Yan, Jieyu Miao, Mingyu You, Yihan Zhu, Yanli Li, Wending Zhou, Xiaonong Cheng (2020). Effects of various electrolytes on the electrochemistry performance of Mn3O4/carbon cloth to ultra-flexible all-solid-state asymmetric supercapacitor. Journal of Energy Storage.DOI
  103. Mingyu You, Wenjing Angela Zhang, Xuehua Yan, Hui Jiang, Jieyu Miao, Yanli Li, Wending Zhou, Yihan Zhu, Xiaonong Cheng (2020). V2O5 nanosheets assembled on 3D carbon fiber felt as a free-standing electrode for flexible asymmetric supercapacitor with remarkable energy density. Ceramics International.DOI
  104. Hui Jiang, Xuehua Yan, Jieyu Miao, Mingyu You, Yihan Zhu, Jianmei Pan, Le Wang, Xiaonong Cheng (2020). Super-conductive silver nanoparticles functioned three-dimensional CuxO foams as a high-pseudocapacitive electrode for flexible asymmetric supercapacitors. Journal of Materiomics.DOI
  105. Shun Guo, Yulu Shi, Ruitang Wu, Haixia Liu, Qingkun Meng, Guanglei Liu, Xiaonong Cheng, Xinqing Zhao (2020). Deformation behavior of a novel sandwich-like TiNb/NiTi composite with good biocompatibility and superelasticity. Materials Science and Engineering A.DOI
  106. Dongfeng Wang, Xuehua Yan, Chen Zhou, Jingjing Wang, Xiaoxue Yuan, Hui Jiang, Yihan Zhu, Xiaonong Cheng, Ruifeng Li (2020). A free‐standing electrode based on 2D SnS 2 nanoplates@ 3D carbon foam for high performance supercapacitors. International Journal of Energy Research.DOI
  107. Jianmei Pan, Haoyu Sun, Xuehua Yan, Wenqiang Zhong, Wei Hua Shen, Yahai Zhang, Xiaonong Cheng (2020). Cube Fe3O4 nanoparticles embedded in three-dimensional net porous carbon from silicon oxycarbide for high performance supercapacitor. Ceramics International.DOI
  108. Xiaoxue Yuan, Xuehua Yan, Chen Zhou, Dongfeng Wang, Yihan Zhu, Jingjing Wang, Xingyi Tao, Xiaonong Cheng (2020). Promising carbon nanosheets decorated by self-assembled MoO2 nanoparticles: Controllable synthesis, boosting performance and application in symmetric coin cell supercapacitors. Ceramics International.DOI
  109. Shuai Gao, Zongliang Nan, Yi Li, Nan Zhao, Qinqin Liu, Guifang Xu, Xiaonong Cheng, Juan Yang (2020). Copper matrix thermal conductive composites with low thermal expansion for electronic packaging. Ceramics International.DOI
  110. Shun Guo, Yulu Shi, Huihui Zhang, Qingkun Meng, Ru Su, Jinming Zhang, Guanglei Liu, Xiaonong Cheng, Xinqing Zhao (2020). Design and fabrication of a Nb/NiTi superelastic composite with high critical stress for inducing martensitic transformation and large recoverable strain for biomedical applications. Materials Science and Engineering C.DOI
  111. Chen Zhou, Qidong Wang, Xuehua Yan, J.J. Wang, D. F. Wang, Xiaoxue Yuan, Hui Jiang, Yihan Zhu, Xiaonong Cheng (2020). A facile route to synthesize Ag decorated MoO3 nanocomposite for symmetric supercapacitor. Ceramics International.DOI
  112. Wen Ma, Shun Guo, Guanglei Liu, Qingkun Meng, Rui Luo, Dongsheng Li, Ching‐Tun Peng, Xiaonong Cheng (2020). Tensile deformation behavior of a solution-treated Ti–33Nb–4Sn alloy with a dual β and α" phases under cyclic loading-unloading. Progress in Natural Science Materials International.DOI
  113. 王稳,陶霞芳,吴赟炎,赵南,程晓农,杨娟,周亚洲(2019). 三明治结构纳米银/氧化石墨烯基底的制备及SERS性能. 《高等学校化学学报》.
  114. 杨雨童,程晓农,罗锐,陈乐利,桂香(2019). 304和304L奥氏体不锈钢的热加工性能研究. 《塑性工程学报》.
  115. 王稳,程晓农,韦家波,罗锐,段承宇,苗现华,李洋城(2019). 等温球化退火温度对超细化H13钢组织与力学性能的影响. 《金属热处理》.DOI
  116. 杨雨童,罗锐,程晓农,陈乐利,桂香,王威,张桢,高仕渊(2019). 喷射成形高强Al-Zn-Mg-Cu合金的高应变速率塑性变形行为. 《中国有色金属学报》.DOI
  117. 高佩,程晓农,罗锐(2019). 热处理对N06230合金无缝管组织及抗拉强度的影响. 《钢铁》.DOI
  118. 杨雨童,罗锐,程晓农,桂香,陈乐利,王威,郑琦(2019). 新型含铝奥氏体耐热合金的高温塑性变形行为和热加工性能. 《材料研究学报》.
  119. 张盼盼,程晓农,罗锐,刘天,高天明(2019). 新型Fe-Cr-Ni耐热合金的应变诱导析出行为. 《钢铁研究学报》.DOI
  120. 王雪俊,程晓农,罗锐,郑琦(2019). 新型含铝奥氏体耐热钢高温氧化行为. 《金属热处理》.DOI
  121. Zhou Chen, Yanze Wu, Xuehua Yan, Jingjing Wang, Qiong Wang, Dong-Feng Wang, Xiaoxue Yuan, Jianmei Pan, Xiaonong Cheng (2019). Is CuO Suitable for Improving the Electrochemical Properties of g-C3N4? Journal of Nanoscience and Nanotechnology.DOI
  122. Xiafang Tao, Nan Zhao, Rongguang Yang, Juan Yang, Xiaonong Cheng, Yazhou Zhou (2019). Ultrafine Ag–Fe alloys with graphene-based cellular monolith as a novel antimicrobial material. Journal of Alloys and Compounds.DOI
  123. Leli Chen, Rui Luo, Yutong Yang, Ching‐Tun Peng, Xiang Gui, Jie Zhang, Ke-yang Song, Pei Gao, Xiaonong Cheng (2019). Investigation on the Hot Deformation Behavior of 316L Stainless Steel Using 3D Processing Map. Transactions of the Indian Institute of Metals.DOI
  124. Xiaoxue Yuan, Xuehua Yan, Chen Zhou, Jingjing Wang, Dongfeng Wang, Hui Jiang, Yihan Zhu, Xingyi Tao, Xiaonong Cheng (2019). Decorating carbon nanosheets with copper oxide nanoparticles for boosting the electrochemical performance of symmetric coin cell supercapacitor with different electrolytes. Ceramics International.DOI
  125. Chen Zhou, Xuehua Yan, Jingjing Wang, Xiaoxue Yuan, Dongfeng Wang, Yihan Zhu, Xiaonong Cheng (2019). Mn3 O4 nanoparticles on activated carbonitride by soft chemical method for symmetric coin cell supercapacitors. International Journal of Energy Research.DOI
  126. Haoyu Sun, Jianmei Pan, Xuehua Yan, Wei Hua Shen, Wenqiang Zhong, Xiaonong Cheng (2019). MnO2 nanoneedles loaded on silicon oxycarbide-derived hierarchically porous carbon for supercapacitor electrodes with enhanced electrochemical performance. Ceramics International.DOI
  127. Chen Zhou, Jingjing Wang, Xuehua Yan, Xiaoxue Yuan, Dongfeng Wang, Yihan Zhu, Xiaonong Cheng (2019). Vertical MoS2 nanosheets arrays on carbon cloth as binder-free and flexible electrode for high-performance all-solid-state symmetric supercapacitor. Ceramics International.DOI
  128. Shun Guo, Yulu Shi, Guanglei Liu, Ruitang Wu, Rui Luo, Ching‐Tun Peng, Qingkun Meng, Xiaonong Cheng, Xinqing Zhao (2019). Design and fabrication of a (β+α") dual-phase Ti-Nb-Sn alloy with linear deformation behavior for biomedical applications. Journal of Alloys and Compounds.DOI
  129. Guomin Hua, Linbo Chen, Jianhong Yang, Yang Qi, Xinglong Dong, Dongyang Li, Shuai Zhang, Xiaonong Cheng (2019). Effect of Co-alloying Ti and V on microstructure, mechanical and tribological properties of (Wx,Tiy,V1-x-y)C–Co alloys: A combined theoretical and experimental study. Journal of Alloys and Compounds.DOI
  130. Xuehua Yan, Xiaoxue Yuan, Jinging Wang, Qiong Wang, Chen Zhou, Dongfeng Wang, Hua Tang, Jianmei Pan, Xiaonong Cheng (2019). Construction of novel ternary dual Z-scheme Ag3VO4/C3N4/reduced TiO2 composite with excellent visible-light photodegradation activity. Journal of materials research/Pratt's guide to venture capital sources.DOI
  131. Rui Luo, Yutong Yang, Huakang Bian, Leli Chen, Lingxiao Ouyang, Ching‐Tun Peng, Pei Gao, Guifang Xu, Xiaonong Cheng (2019). High Temperature Deformation Characteristics of an Alumina‐Forming Stainless Steel. steel research international.DOI
  132. D. F. Wang, Yin‐Zhong Wu, Xuehua Yan, J.J. Wang, Qidong Wang, Chen Zhou, Xiaoxue Yuan, Jianmei Pan, Xiaonong Cheng (2019). Self-assembly synthesis of AgNPs@g-C3N4 composite with enhanced electrochemical properties for supercapacitors. MRS Communications.DOI
  133. Jingjing Wang, Chen Zhou, Xuehua Yan, Qiong Wang, Dawei Sha, Jianmei Pan, Xiaonong Cheng (2019). Hydrothermal synthesis of hierarchical nanocomposite assembled by Bi2S3 nanorods and MoS2 nanosheets with improved electrochemical performance. Journal of Materials Science Materials in Electronics.DOI
  134. Qiong Wang, Chen Zhou, Xuehua Yan, Jingjing Wang, Dongfeng Wang, Xiaoxue Yuan, Xiaonong Cheng (2019). One-dimensional MoO3 coated by carbon for supercapacitor with enhanced electrochemical performance. Journal of Materials Science Materials in Electronics.DOI
  135. Jia Zhu, Wentao Zhou, Yazhou Zhou, Xiaonong Cheng, Juan Yang (2019). Cobalt Sulfide/Reduced Graphene Oxide Nanocomposite with Enhanced Performance for Supercapacitors. Journal of Electronic Materials.DOI
  136. 黄骥培,李毅,杨申辉,周亚洲,程晓农,朱佳,杨娟(2018). 三维多孔结构Pt-Ag气凝胶的制备及电催化氧还原反应性能. 《高等学校化学学报》.
  137. 程晓农,王皎,罗锐,朱晶晶,杨雨童,郑琦(2018). 超(超)临界火电用新型奥氏体不锈钢的高温塑性变形行为及本构模型. 《塑性工程学报》.
  138. 徐桂芳,胡峰,农靖云,罗锐,周晓,程晓农(2018). 06Ni31Cr19Mo2Nb含铌奥氏体不锈钢热变形行为及其热加工图. 《塑性工程学报》.
  139. 刘天,程晓农,罗锐,郑琦,王皎,陈光,杨乔(2018). 固溶处理对Cr18Ni31NbAl奥氏体不锈钢组织和抗拉强度的影响. 《热加工工艺》.
  140. 谢奕心,程晓农,徐桂芳,李冬升,郑琦(2018). 高温合金Inconel 740H在空气和水蒸气环境中的氧化行为. 《热加工工艺》.
  141. 杨乔,程晓农(2018). 新型奥氏体耐热钢钝化膜的XPS谱研究. 《材料保护》.
  142. 杨乔,程晓农(2018). 新型奥氏体耐热合金的应力腐蚀性能. 《材料保护》.
  143. 田恬,郑琦,商铫,侯艳嫔,程晓农,郭顺(2018). 新型亚稳β型Ti-30Nb-1Mo-4Sn合金时效过程中ω相与α相的竞争. 《稀有金属》.
  144. 高佩,程晓农,陈正宗,李冬升,罗锐,刘瑜(2018). 超临界水冷堆包壳材料用C-276合金的热拉伸行为研究. 《塑性工程学报》.
  145. Shuai Gao, Nan Zhao, Qinqin Liu, Yi Li, Guifang Xu, Xiaonong Cheng, Juan Yang (2018). Sc2W3O12/Cu composites with low thermal expansion coefficient and high thermal conductivity for efficient cooling of electronics. Journal of Alloys and Compounds.DOI
  146. Xiafang Tao, Yazhou Zhou, Kai Xu, Yunyan Wu, Jianli Mi, Yi Li, Qinqin Liu, Xiaonong Cheng, Nan Zhao, Haifeng Shi, Juan Yang (2018). Bifunctional Material with Organic Pollutant Removing and Antimicrobial Properties: Graphene Aerogel Decorated with Highly Dispersed Ag and CeO 2 Nanoparticles. ACS Sustainable Chemistry & Engineering.DOI
  147. Yu Dai, Ming Chen, Xuehua Yan, Jingjing Wang, Qiong Wang, Chen Zhou, Dongfeng Wang, Han Zhang, Yaping Wang, Xiaonong Cheng (2018). Ultra-Small Fe3O4 Nanoparticles Decorated WS2 Nanosheets with Superior Electrochemical Properties for Supercapacitors. Journal of Nanoscience and Nanotechnology.DOI
  148. Yi Lut Li, Hejing Wen, Juan Yang, Yazhou Zhou, Xiaonong Cheng (2018). Boosting oxygen reduction catalysis with N, F, and S tri-doped porous graphene: Tertiary N-precursors regulates the constitution of catalytic active sites. Carbon.DOI
  149. Yunyan Wu, Yazhou Zhou, Xu Han, Qinqin Liu, Yi Li, Lili Zhang, Hanqing Liu, Zhigang Tu, Xiaonong Cheng, Juan Yang (2018). Highly Active, Superstable, and Biocompatible Ag/Polydopamine/g-C 3 N 4 Bactericidal Photocatalyst: Synthesis, Characterization, and Mechanism. ACS Sustainable Chemistry & Engineering.DOI
  150. Yazhou Zhou, Jipei Huang, Weidong Shi, Yi Li, Yunyan Wu, Qinqin Liu, Jia Zhu, Nan Zhao, Lili Zhang, Juan Yang, Xiaonong Cheng (2018). Ecofriendly and environment-friendly synthesis of size-controlled silver nanoparticles/graphene composites for antimicrobial and SERS actions. Applied Surface Science.DOI
  151. Qidong Wang, Chen Zhou, Xuehua Yan, J.J. Wang, D. F. Wang, Xiaoxue Yuan, Xiaonong Cheng (2018). TiO 2 Nanoparticles Modified MoO 3 Nanobelts as Electrode Materials with Superior Performances for Supercapacitors. Energy Technology.DOI
  152. Guomin Hua, J.X. Zhong, Yang Qi, Xiaonong Cheng (2018). Influence of carbon on stability, mechanical property, electronic structure, and lattice dynamics of silicon carbonitride. Journal of the American Ceramic Society.DOI
  153. Jingjing Wang, Nanfei Ye, Xuehua Yan, Chen Zhou, Jianmei Pan, Dongfeng Wang, Qiong Wang, Han Zhang, Xiaonong Cheng (2018). Sb2WO6 nanoparticles coated TiO2 nanobelts exhibiting remarkable photo-catalyst response. Materials Technology.DOI
  154. Shun Guo, Yao Shang, Jinming Zhang, Jinming Zhang, Junsong Zhang, Junsong Zhang, Qingkun Meng, Xiaonong Cheng, Xinqing Zhao (2018). A metastable β-type Zr-4Mo-4Sn alloy with low cost, low Young's modulus and low magnetic susceptibility for biomedical applications. Journal of Alloys and Compounds.DOI
  155. Jing Zhong, Guomin Hua, Linbo Chen, Changsheng Li, Jianhong Yang, Xiaonong Cheng (2018). Influence of carbon on structure stability, mechanical and tribological properties of β-Si3(Cx,N1−x)4 silicon carbonitride. Materials Research Express.DOI
  156. Jingjing Wang, Ming Chen, Xuehua Yan, Chen Zhou, Qiong Wang, Dongfeng Wang, Xiaoxue Yuan, Jianmei Pan, Xiaonong Cheng (2018). A facile one-step hydrothermal synthesis of carbon–MoS2 yolk–shell hierarchical microspheres with excellent electrochemical cycling stability. Journal of Applied Electrochemistry.DOI
  157. Nanfei Ye, Jingjing Wang, Xuehua Yan, Dawei Sha, Ming Chen, Chen Zhou, Dongfeng Wang, Xiaoxue Yuan, Xiaonong Cheng, Jiaxing Zu (2018). Novel Cs x WO 3 /TiO 2 Microspheres as Enhanced Visible Light Photocatalysts for Dye Pollutant Treatments. Journal of Nanoscience and Nanotechnology.DOI
  158. Shun Guo, Jinming Zhang, Jinming Zhang, Yao Shang, Junsong Zhang, Junsong Zhang, Qingkun Meng, Xiaonong Cheng, Xinqing Zhao (2018). A novel metastable β-type Zr-12Nb-4Sn alloy with low Young's modulus and low magnetic susceptibility. Journal of Alloys and Compounds.DOI
  159. Yazhou Zhou, Chengzhou Zhu, Guohai Yang, Dan Du, Xiaonong Cheng, Juan Yang, Yuehe Lin (2018). Embedding platinum-based nanoparticles within ordered mesoporous carbon using supercritical carbon dioxide technique as a highly efficient oxygen reduction electrocatalyst. Journal of Alloys and Compounds.DOI
  160. Yi Lut Li, Yazhou Zhou, Chengzhou Zhu, Yun Hang Hu, Shuai He Gao, Qinqin Liu, Xiaonong Cheng, Lili Zhang, Juan Yang, Yuehe Lin (2018). Porous graphene doped with Fe/N/S and incorporating Fe 3 O 4 nanoparticles for efficient oxygen reduction. Catalysis Science & Technology.DOI
  161. Yi Lut Li, Yazhou Zhou, Hejing Wen, Juan Yang, Chanez Maouche, Qinqin Liu, Yunyan Wu, Chao Zeng Cheng, Jia Zhu, Xiaonong Cheng (2018). N,S-Atom-coordinated Co 9 S 8 trinary dopants within a porous graphene framework as efficient catalysts for oxygen reduction/evolution reactions. Dalton Transactions.DOI
  162. 罗锐,程晓农,徐桂芳,郭顺,郑琦,朱晶晶(2017). 新型Fe-20Cr-30Ni-0.6Nb-2Al-Mo合金的热变形行为及本构模型. 《稀有金属》.
  163. 程晓农,姚永泉,李冬升,罗锐,郑琦,唐桢丁(2017). 一种含铝奥氏体不锈钢的高温氧化行为. 《金属热处理》.
  164. 徐桂芳,徐文慧,罗锐,李冬升,程晓农(2017). 高氮低镍奥氏体不锈钢的低温性能与组织稳定性. 《金属热处理》.
  165. 程晓农,韩秉霖,罗锐,郑琦,朱晶晶,谢奕心,田恬(2017). 新型耐热奥氏体不锈钢焊接接头650℃时效组织及力学性能. 《金属热处理》.
  166. 张琰琰,程晓农,黎振兴,杨娟,徐凯,陈敏(2017). 粉末冶金法制备SiCp/Al2W3O12/Al复合材料及其热膨胀性能. 《材料科学与工程学报》.
  167. 程晓农,朱晶晶,罗锐,郑琦,韩秉霖(2017). 新型CHDG-A06奥氏体不锈钢的热变形行为. 《机械工程材料》.
  168. 高佩,朱海涛,程晓农,徐松乾,李冬升,潘坤,丛生达(2017). 700℃超超临界锅炉用Inconel 740H合金的热塑性. 《金属热处理》.
  169. 徐文慧,徐桂芳,罗锐,吴晓东,程晓农(2017). 深冷处理后0Cr17Mn17Mo3NiN奥氏体不锈钢的低温冲击性能. 《机械工程材料》.
  170. 程晓农,唐桢丁,罗锐,郭顺,姚永泉,李冬升(2017). 固溶处理对新型Cr18Ni10Cu3NbN奥氏体不锈钢组织和力学性能的影响. 《金属热处理》.
  171. 徐桂芳,袁圆,卓秀秀,罗锐,程晓农(2017). 新型0Cr17Mn17Mo3NiN奥氏体不锈钢模拟焊接热影响区的组织和性能. 《金属热处理》.
  172. 郭幼丹,程晓农,蓝剑锋,梁昱晨,吴华峰(2017). 热成形SAF2507双相不锈钢析出相与耐腐蚀性能. 《材料热处理学报》.
  173. Yu Dai, Lu-Lin Wei, Ming Chen, Jingjing Wang, Jie Ren, Qiong Wang, Yanze Wu, Yaping Wang, Xiaonong Cheng, Xuehua Yan (2017). Liquid Exfoliation and Electrochemical Properties of WS2 Nanosheets. Journal of Nanoscience and Nanotechnology.DOI
  174. Guomin Hua, Changsheng Li, Xiaonong Cheng, Xinluo Zhao, Quan Feng, Zhijie Li, Dongyang Li, Jerzy A. Szpunar (2017). First-principles study on influence of molybdenum on acicular ferrite formation on TiC particles in microallyed steels. Solid State Communications.DOI
  175. Nan Zhao, Fei Xiao, Xiaonong Cheng, Juan Yang (2017). Synthesis of silver/silver chloride/graphene oxide composite and its surface-enhanced Raman scattering activity and self-cleaning property. IOP Conference Series Materials Science and Engineering.DOI
  176. Yi Li, Juan Yang, Jipei Huang, Yazhou Zhou, Kai Xu, Nan Zhao, Xiaonong Cheng (2017). Soft template-assisted method for synthesis of nitrogen and sulfur co-doped three-dimensional reduced graphene oxide as an efficient metal free catalyst for oxygen reduction reaction. Carbon.DOI
  177. Ming Chen, Jingjing Wang, Xuehua Yan, Jie Ren, Yu Dai, Qiong Wang, Yaping Wang, Xiaonong Cheng (2017). Flower-like molybdenum disulfide nanosheets grown on carbon nanosheets to form nanocomposites: Novel structure and excellent electrochemical performance. Journal of Alloys and Compounds.DOI
  178. Xuehua Yan, Yu Dai, Ming Chen, Jingjing Wang, Jie Ren, Qiong Wang, Yanze Wu, Nanfei Ye, Yaping Wang, Xiaonong Cheng (2017). WS2 nanosheets decorated by Ag nanoparticles with different content and uniform distribution for enhanced electrochemical properties. Journal of Nanoparticle Research.DOI
  179. Yanze Wu, Minghaonan Chen, Xuehua Yan, Jie Ren, Yu Dai, J.J. Wang, Jianmei Pan, Y.P. Wang, Xiaonong Cheng (2017). Hydrothermal synthesis of Fe 3 O 4 nanorods/graphitic C 3 N 4 composite with enhanced supercapacitive performance. Materials Letters.DOI
  180. Shun Guo, Yao Shang, Junsong Zhang, Qingkun Meng, Xiaonong Cheng, Xinqing Zhao (2017). In situ synchrotron X-ray diffraction study of deformation behaviour of a metastable β-type Ti-33Nb-4Sn alloy. Materials Science and Engineering A.DOI
  181. Shun Guo, Yao Shang, Junsong Zhang, Qingkun Meng, Xiaonong Cheng, Xinqing Zhao (2017). In situ synchrotron X-ray diffraction study of stress-induced martensitic transformation in a metastable β-type Ti-33Nb-4Sn alloy. Intermetallics.DOI
  182. Yazhou Zhou, Xiaonong Cheng, Clive Hsu Yen, Chien Moo Wai, Chongmin Wang, Juan Yang, Yuehe Lin (2017). Synthesis of an excellent electrocatalyst for oxygen reduction reaction with supercritical fluid: Graphene cellular monolith with ultrafine and highly dispersive multimetallic nanoparticles. Journal of Power Sources.DOI
  183. Jianmei Pan, Jie Ren, Yu Xie, Xiaoshun Wei, Yi Guan, Xuehua Yan, Hua Tang, Xiaonong Cheng (2017). Porous SiOC composites fabricated from preceramic polymers and wood powders for efficient dye adsorption and removal. Research on Chemical Intermediates.DOI
  184. 徐凯,李毅,赵南,杜文修,曾炜炜,高帅,程晓农,杨娟(2016). 中空铂镍/三维石墨烯催化剂的制备及电化学性能. 《高等学校化学学报》.
  185. 杜文修,杨娟,程晓农,吴贲华,王银茂,高国忠(2016). 纳米银的制备及其在抗菌玻璃中的应用. 《成都工业学院学报》.
  186. 孙秀娟,程晓农,杨娟,刘芹芹(2016). 酸性溶剂对水热法合成ZrW2O8粉体形貌的影响. 《硅酸盐通报》.
  187. 孙秀娟,左方圆,焦雷,程晓农,杨娟,刘芹芹(2016). ZrW2O8薄膜的合成及结构表征. 《功能材料》.
  188. 孙秀娟,程晓农,杨娟,刘芹芹(2016). 不同酸催化溶胶-凝胶法制备负热膨胀ZrW2O8粉体及其性能. 《机械工程材料》.
  189. 徐桂芳,严羽,徐文慧,程晓农,李冬升(2016). 03Cr16Mn14Mo2N奥氏体不锈钢的热疲劳行为. 《机械工程材料》.
  190. 程晓农,张楠,王铖,李冬升,郭顺,罗锐(2016). 新型Cr18Ni31NbAl铁镍基合金的高温蠕变行为. 《热加工工艺》.
  191. 潘建梅,严学华,程晓农,张成华(2016). 前驱体热解制备多孔SiOC复合材料及性能. 《硅酸盐学报》.
  192. 罗锐,程晓农,徐桂芳,李冬升,郑琦,唐桢丁,姚永泉,张琰琰(2016). 一种铁镍铬合金的热变形行为及其本构模型的修正. 《功能材料》.
  193. 程晓农,王铖,张楠,李冬升,罗锐,高佩(2016). 新型Cr18Ni9NbTiN奥氏体不锈钢的高温蠕变行为. 《金属热处理》.
  194. 吴晓东,吴刚,朱晶晶,李冬升,程晓农(2016). 含铝奥氏体耐热钢的高温抗氧化性能. 《金属热处理》.
  195. Huan Yu, Junli Wang, Tingting Wang, Hongsong Yu, Juan Yang, Guiwu Liu, Guanjun Qiao, Qing Yang, Xiaonong Cheng (2016). Scalable colloidal synthesis of uniform Bi 2 S 3 nanorods as sensitive materials for visible-light photodetectors. CrystEngComm.DOI
  196. Ming Chen, Yu Dai, Jingjing Wang, Qiong Wang, Yaping Wang, Xiaonong Cheng, Xuehua Yan (2016). Smart combination of three-dimensional-flower-like MoS2 nanospheres/interconnected carbon nanotubes for application in supercapacitor with enhanced electrochemical performance. Journal of Alloys and Compounds.DOI
  197. Jinjin Miao, Jiaqi Liu, Xiao Dong Wu, Han Zou, Dawei Sha, Jie Ren, Yu Dai, Xuehua Yan, Xiaonong Cheng (2016). Thermal expansion, electrical conductivity and hardness of Mn 3 Zn 0.5 Sn 0.5 N/Al composites. Science and Engineering of Composite Materials.DOI
  198. Yazhou Zhou, Juan Yang, Chengzhou Zhu, Dan Du, Xiaonong Cheng, Clive Hsu Yen, Chien Moo Wai, Yuehe Lin (2016). Newly Designed Graphene Cellular Monolith Functionalized with Hollow Pt-M (M = Ni, Co) Nanoparticles as the Electrocatalyst for Oxygen Reduction Reaction. ACS Applied Materials & Interfaces.DOI
  199. Rui Luo, Qi Zheng, Zhending Tang, Yongquan Yao, Guifang Xu, Dongsheng Li, Xiaonong Cheng (2016). Hot Deformation Behavior and Constitutive Modeling of Alloy 800H Considering Effectsof Strain. High Temperature Materials and Processes.DOI
  200. Jianmei Pan, Xuehua Yan, Xiaonong Cheng, Wei Shen, Shaoxin Li, Cai Xiaoling (2016). In situ synthesis and electrical properties of porous SiOC ceramics decorated with SiC nanowires. Ceramics International.DOI
  201. Yazhou Zhou, Ru Chen, Tingting He, Kai Xu, Dan Du, Nan Zhao, Xiaonong Cheng, Juan Yang, Haifeng Shi, Yuehe Lin (2016). Biomedical Potential of Ultrafine Ag/AgCl Nanoparticles Coated on Graphene with Special Reference to Antimicrobial Performances and Burn Wound Healing. ACS Applied Materials & Interfaces.DOI
  202. Xuehua Yan, Jinjin Miao, Jiaqi Liu, Xiao Dong Wu, Han Zou, Dawei Sha, Jie Ren, Yu Dai, Jingjing Wang, Xiaonong Cheng (2016). Zero thermal expansion, electrical conductivity and hardness of Mn 3 Zn 0.5 Sn 0.5 N/Cu composites. Journal of Alloys and Compounds.DOI
  203. Yan-Pin Hou, Shun Guo, X.L. Qiao, Tian Tian, Qingkun Meng, Xiaonong Cheng, Xinqing Zhao (2016). Origin of ultralow Young׳s modulus in a metastable β-type Ti–33Nb–4Sn alloy. Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials.DOI
  204. Yazhou Zhou, Clive Hsu Yen, Yun Hang Hu, Chongmin Wang, Xiaonong Cheng, Chien Moo Wai, Juan Yang, Yuehe Lin (2016). Making ultrafine and highly-dispersive multimetallic nanoparticles in three-dimensional graphene with supercritical fluid as excellent electrocatalyst for oxygen reduction reaction. Journal of Materials Chemistry A.DOI
  205. Zhizhong Yuan, Hua Cheng, Qixun Dai, Xiaonong Cheng (2016). Content revision and case study in Metallic Materials.DOI
  206. 缪进进,刘佳琪,严学华,程晓农(2015). 反钙钛矿Mn3AN负热膨胀材料研究进展. 《中国材料进展》.
  207. 孙秀娟,程晓农,杨娟,刘芹芹(2015). 负热膨胀ZrW2O8纳米球颗粒的制备及其性能研究. 《材料导报》.
  208. 居相文,吴日民,周亚洲,马双彪,杨娟,程晓农(2015). 氧化石墨烯在水热法制备Sc2W3O12粉体中的应用. 《无机材料学报》.
  209. 刘婧,刘军,李江,林丽,潘裕柏,程晓农,郭景坤(2015). 球磨转速对Nd:YAG透明陶瓷的显微结构及光学性能的影响. 《无机材料学报》.
  210. 莫纪平,程晓农,邓平安,许晓静,吴瑶,蒋伟(2015). 多向压缩对7085铝合金挤压材组织和力学性能的影响. 《稀有金属材料与工程》.
  211. 孙秀娟,程晓农,杨娟,刘芹芹(2015). 柠檬酸溶胶-凝胶法合成负热膨胀性ZrW2O8粉体及其性质研究. 《功能材料》.
  212. 程晓农,罗锐,李冬升,戴起勋,徐桂芳,高佩,邱宇,刘瑜,王植栋(2015). 基于Incoloy800H钨极氩弧焊接头组织及其性能分析. 《稀有金属材料与工程》.
  213. 孙秀娟,程晓农,杨娟,刘芹芹(2015). 酸性溶剂对水热法合成ZrW 2 O 8 粉体形貌的影响(POSTER PRESENTATION). 《第二届海峡两岸功能材料科技与产业峰会(2015)》.
  214. 吴日民,居相文,程晓农,杨娟(2015). 基于ZrW2O8粉体的可控热膨胀复合材料的研究进展. 《材料科学与工程学报》.
  215. 吴浩,徐桂芳,严羽,程晓农,李冬升,吴晓东(2015). 新型高氮低镍奥氏体不锈钢的点蚀性能. 《金属热处理》.
  216. 郭顺,郑琦,张俊松,程晓农(2015). 低弹性模量亚稳β型Ti-38Nb合金的微观组织与力学行为. 《稀有金属》.
  217. 程晓农,张瑜,李冬升,韩敏,高佩,王铖,张楠(2015). 新型USC锅炉管用CHDG-A06合金的晶间腐蚀敏感性. 《金属热处理》.
  218. Shun Guo, Qingkun Meng, Xiaonong Cheng, Xinqing Zhao (2015). Microstructural evolution and mechanical behavior of metastable β-type Ti–30Nb–1Mo–4Sn alloy with low modulus and high strength. Progress in Natural Science Materials International.DOI
  219. Qinqin Liu, Chunya Fan, Hua Tang, Xiujuan Sun, Juan Yang, Xiaonong Cheng (2015). One-pot synthesis of g-C3N4/V2O5 composites for visible light-driven photocatalytic activity. Applied Surface Science.DOI
  220. Qinqin Liu, Chunya Fan, Junxiong Liu, Xiujuan Sun, Xiaonong Cheng, Haohua Li (2015). Synthesis, photocatalytic performance and negative thermal expansion property of nanorods ZrMo2−x V x O8−x/2 with cubic structure. Journal of Sol-Gel Science and Technology.DOI
  221. Shun Guo, Qi Zheng, Xiuli Hou, Xiaonong Cheng, Xinqing Zhao (2015). Wear response of metastable β‐type Ti–25Nb–2Mo–4Sn alloy for biomedical applications. Rare Metals.DOI
  222. Jinjin Miao, Jiaqi Liu, Jianmei Pan, Yi Wang, Xueying Chen, Wenhao Zhang, Xuehua Yan, Xiaonong Cheng (2015). Thermal expansion and electrical properties of stannum doped manganese nitrides and composites. Journal of the European Ceramic Society.DOI
  223. Jing Liu, Xiaonong Cheng, Jiang Li, Tengfei Xie, М. Г. Иванов, Xuewei Ba, Haohong Chen, Qiang Liu, Yubai Pan, Jingkun Guo (2015). Influence of non-stoichiometry on solid-state reactive sintering of YAG transparent ceramics. Journal of the European Ceramic Society.DOI
  224. Shun Guo, Junsong Zhang, Xiaonong Cheng, Xinqing Zhao (2015). A metastable β-type Ti–Nb binary alloy with low modulus and high strength. Journal of Alloys and Compounds.DOI
  225. Qinqin Liu, Chunya Fan, Xiujuan Sun, Xiaonong Cheng, Juan Yang, Hua Tang (2015). Influence of doping and solid solution formation on photocatalytic activity of ZrW 2 O 8 with cubic structure. Materials Technology.DOI
  226. Jianmei Pan, Xuehua Yan, Xiaonong Cheng, Dong Yu Xu, Qingbo Lu (2015). Preparation and tribological properties of hierarchical porous SiOC/BN composites from wood powder and polysiloxane precursor. Ceramics International.DOI
  227. Xiao Dong Wu, Xuehua Yan, Yu Dai, Jingjing Wang, Jie Wang, Xiaonong Cheng (2015). Facile synthesis of AgNPs/MoS2 nanocomposite with excellent electrochemical properties. Materials Letters.DOI
  228. Qinqin Liu, Chunya Fan, Guodong Wu, Yuhong Zhao, Xiujuan Sun, Xiaonong Cheng, Jiangtao Shen, Yangming Hu (2015). In-situ synthesis of Sc2W3O12/YSZ ceramic composites with controllable thermal expansion. Ceramics International.DOI
  229. Yazhou Zhou, Clive Hsu Yen, Shaofang Fu, Guohai Yang, Chengzhou Zhu, Dan Du, Pui Ching Wo, Xiaonong Cheng, Juan Yang, Chien Moo Wai, Yuehe Lin (2015). One-pot synthesis of B-doped three-dimensional reduced graphene oxide via supercritical fluid for oxygen reduction reaction. Green Chemistry.DOI
  230. Yazhou Zhou, Guohai Yang, Horng‐Bin Pan, Chengzhou Zhu, Shaofang Fu, Qiurong Shi, Dan Du, Xiaonong Cheng, Juan Yang, Chien Moo Wai, Yuehe Lin (2015). Ultrasonic-assisted synthesis of carbon nanotube supported bimetallic Pt–Ru nanoparticles for effective methanol oxidation. Journal of Materials Chemistry A.DOI
  231. Yeping Li, Jingbo Xu, Xu Yun, Liying Huang, Junli Wang, Xiaonong Cheng (2015). Synthesis and characterization of fluorescent chitosan–ZnSe/ZnS nanoparticles for potential drug carriers. RSC Advances.DOI
  232. 苏文佳,左然,程晓农(2014). μ-PD法蓝宝石纤维晶体生长中传热传质的数值模拟. 《人工晶体学报》.
  233. 苏文佳,左然,程晓农,狄晨莹(2014). 多晶硅炉氩气导流系统设计与数值模拟优化. 《人工晶体学报》.
  234. 苏文佳,左然,狄晨莹,程晓农(2014). 不同驱动力对Cz硅生长中熔体对流影响的数值模拟研究. 《人工晶体学报》.
  235. 徐桂芳,王飞,严羽,程晓农,戴起勋(2014). 新型低Ni不锈钢的组织与性能. 《金属热处理》.
  236. 李惠,程晓农,谢春生,焦雷(2014). CuCo2Be表面等离子喷涂制备Cr3C2-NiCr/NiAl复合涂层成形机理及界面扩散研究. 《稀有金属材料与工程》.
  237. 罗锐,程晓农,李冬升,徐桂芳,高佩,郭顺,邱宇,郑琦(2014). 一种新型核级奥氏体不锈钢焊接接头的晶间腐蚀研究. 《功能材料》.
  238. 李惠,程晓农,谢春生,项宏福,王冀恒(2014). CuCo2Be表面等离子喷涂NiAl涂层的物相组成及其形成机理. 《焊接学报》.
  239. 李惠,程晓农,谢春生,陆鹏程(2014). CuCo2Be表面热喷涂制备Cr3C2-NiCr涂层的微观结构及高温摩擦磨损行为. 《稀有金属材料与工程》.
  240. 程晓农,郑琦,李冬升,陈明,赵春风,王植栋,高佩,都红(2014). 新型Cr18Ni31Al合金的高温抗氧化性能. 《金属热处理》.
  241. 徐桂芳,梁国山,杨娟,刘芹芹,严学华,程晓农(2014). ZrWMoO8/Cu复合材料的制备与热膨胀性能(英文). 《稀有金属材料与工程》.
  242. 邓平安,许晓静,莫纪平,蒋伟,程晓农,吴瑶(2014). 多向压缩对7085铝合金挤压材组织和抗腐蚀性能的影响. 《材料热处理学报》.
  243. 程晓农,赵春风,李冬升,郭顺,陈明,郑琦,高佩,陶亚平(2014). 0Cr19Ni30Al2奥氏体不锈钢焊缝组织和性能的研究. 《热加工工艺》.
  244. Guifang Xu, Guoshan Liang, Juan Yang, Qinqin Liu, Xuehua Yan, Xiaonong Cheng (2014). Preparation and Thermal Expansion Property of ZrWMoO8/Cu Composite. 《稀有金属材料与工程》.DOI
  245. Junli Wang, Weiling Fan, Juan Yang, Zulin Da, Xiaofei Yang, Kangmin Chen, Huan Yu, Xiaonong Cheng (2014). Tetragonal–Orthorhombic–Cubic Phase Transitions in Ag 2 Se Nanocrystals. Chemistry of Materials.DOI
  246. Jing Liu, Qiang Liu, Jiang Li, М. Г. Иванов, Xuewei Ba, Yong Yuan, Lin Li, Min Chen, Wenbin Liu, Huamin Kou, Yun Shi, Haohong Chen, Yubai Pan, Xiaonong Cheng, Jingkun Guo (2014). Influence of doping concentration on microstructure evolution and sintering kinetics of Er:YAG transparent ceramics. Optical Materials.DOI
  247. Qinqin Liu, Xiaonong Cheng, Xiujuan Sun, Juan Yang, Haohua Li (2014). Synthesis and characterization of sol–gel derived ZrV2O7 fibers with negative thermal expansion property. Journal of Sol-Gel Science and Technology.DOI
  248. Shun Guo, Qingkun Meng, Xiaonong Cheng, Xinqing Zhao (2014). α′ martensite Ti–10Nb–2Mo–4Sn alloy with ultralow elastic modulus and High strength. Materials Letters.DOI
  249. Qinqin Liu, Juan Yang, Xiaoqing Rong, Xiujuan Sun, Xiaonong Cheng, Hua Tang, Haohua Li (2014). Structural, negative thermal expansion and photocatalytic properties of ZrV2O7: a comparative study between fibers and powders. Materials Characterization.DOI
  250. Tingting He, Haitao Liu, Yazhou Zhou, Juan Yang, Xiaonong Cheng, Haifeng Shi (2014). Antibacterial effect and proteomic analysis of graphene-based silver nanoparticles on a pathogenic bacterium Pseudomonas aeruginosa. BioMetals.DOI
  251. Shun Guo, Qingkun Meng, Xiaonong Cheng, Xinqing Zhao (2014). Deformation behavior of metastable β-type Ti–25Nb–2Mo–4Sn alloy for biomedical applications. Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials.DOI
  252. Yazhou Zhou, Xiaonong Cheng, Dan Du, Juan Yang, Nan Zhao, Shuangbiao Ma, Tao Zhong, Yuehe Lin (2014). Graphene–silver nanohybrids for ultrasensitive surface enhanced Raman spectroscopy: size dependence of silver nanoparticles. Journal of Materials Chemistry C.DOI
  253. Nan Zhao, Xiaonong Cheng, Juan Yang, Mingxin Yang, Sihui Zheng, Yazhou Zhou (2014). Experimental study on the preparation, characterization and conductivity improvement of reduced graphene-oxide papers. Journal of Physics and Chemistry of Solids.DOI
  254. Qinqin Liu, Juan Yang, Xiujuan Sun, Xiaonong Cheng, Hua Tang, Haohua Li (2014). Influence of W doped ZrV2O7 on structure, negative thermal expansion property and photocatalytic performance. Applied Surface Science.DOI
  255. Xiaonong Cheng, Fuxiang Mao, Zhitang Song, Cheng Peng, Yuefeng Gong (2014). Improved performances of Ge2Sb2Te5based phase change memory by W doping. Japanese Journal of Applied Physics.DOI
  256. Nan Zhao, Xiaonong Cheng, Yazhou Zhou, Mingxin Yang, Juan Yang, Tao Zhong, Sihui Zheng (2014). Synthesis of flexible free-standing silver nanoparticles-graphene films and their surface-enhanced Raman scattering activity. Journal of Nanoparticle Research.DOI
  257. Xuehua Yan, Jianmei Pan, Xiaonong Cheng, Chenghua Zhang, Guifang Xu (2014). Synthesis of Hierarchical Porous SiCO Monoliths from Preceramic Polymer Impregnated with Porous Templates. Ceramic transactions /Ceramic transactions.DOI
  258. Dong Yu Xu, Kai He, Renhong Yu, Lei Jiao, Hongming Yuan, Xiujuan Sun, Guoping Zhao, Hongxin Xu, Xiaonong Cheng (2014). Effect of AETiO3 (AE=Mg, Ca, Sr) doping on dielectric and varistor characteristics of CaCu3Ti4O12 ceramic prepared by the sol–gel process. Journal of Alloys and Compounds.DOI
  259. Qinqin Liu, Zengqiang Yu, Gaofa Che, Jinliang Yao, Xiujuan Sun, Xiaonong Cheng, Juan Yang (2014). Synthesis and tunable thermal expansion properties of Sc2−xYxW3O12 solid solutions. Ceramics International.DOI
  260. 黄立英,李夜平,李华明,许晖,徐远国,程晓农(2013). Bi2O3/g-C3N4复合光催化剂的合成及其可见光降解亚甲基蓝研究. 《化工新型材料》.
  261. Dong Yu Xu, Jie-ting Wu, Lei Jiao, Hongxin Xu, Peimei ZHANG, Renhong Yu, Xiaonong Cheng (2013). Highly nonlinear property and threshold voltage of Sc2O3 doped ZnO-Bi2O3-based varistor ceramics. Journal of Rare Earths.DOI
  262. 程晓农,高仕渊,李冬升,戴起勋,姜杨,王植栋,邱宇,都红(2013). 新型Cr20Ni30NbAl铁镍基合金的高温蠕变行为. 《金属热处理》.
  263. 程晓农,姜杨,李冬升,戴起勋,邱宇,高仕渊,王植栋(2013). 新型Cr19Ni28Ti合金空气中高温氧化的研究. 《功能材料》.
  264. 程晓农,王植栋,李冬升,戴起勋,邱宇,高仕渊,姜杨,高佩,刘瑜(2013). 新型铁铬镍合金固溶处理后的组织和性能. 《金属热处理》.
  265. 李军,朱君君,程晓农(2013). 稀土钨酸盐负热膨胀材料研究进展. 《功能材料》.
  266. 程晓农,邱宇,李冬升,戴起勋,高仕渊,姜杨,王植栋,高佩,王国建(2013). 800H合金焊接性能研究. 《热加工工艺》.
  267. 郭幼丹,程晓农(2013). Cr12MoV钢表面喷涂陶瓷涂层组织与性能研究. 《热加工工艺》.
  268. 刘强,刘婧,李江,曾燕萍,巴学巍,潘裕柏,程晓农,郭景坤(2013). 人眼安全激光用Er:YAG陶瓷的致密化、显微结构与光学性能. 《硅酸盐学报》.
  269. 潘建梅,程晓农,严学华,张成华,徐桂芳(2013). 多孔SiCO陶瓷中SiC纳米线的原位合成及生长机理. 《无机材料学报》.
  270. Wenjia Su, Ran Zuo, Jinggang Lu, Chenying Di, Xiaonong Cheng (2013). Numerical and experimental studies on the Black Periphery Wafer in CZ Si growth. Journal of Crystal Growth.DOI
  271. Jianmei Pan, Jianmei Pan, Jianfeng Pan, Jianfeng Pan, Xiaonong Cheng, Xuehua Yan, Qingbo Lu, Chenghua Zhang (2013). Synthesis of hierarchical porous silicon oxycarbide ceramics from preceramic polymer and wood biomass composites. Journal of the European Ceramic Society.DOI
  272. Liying Huang, Hui Fang Xu, Rongxian Zhang, Xiaonong Cheng, Jiexiang Xia, Yuanguo Xu, Huaming Li (2013). Synthesis and characterization of g-C3N4/MoO3 photocatalyst with improved visible-light photoactivity. Applied Surface Science.DOI
  273. Yazhou Zhou, Juan Yang, Tingting He, Haifeng Shi, Xiaonong Cheng, Yuxin Lu (2013). Highly Stable and Dispersive Silver Nanoparticle–Graphene Composites by a Simple and Low‐Energy‐Consuming Approach and Their Antimicrobial Activity. Small.DOI
  274. Jing Liu, Qiang Liu, Jiang Li, Xuewei Ba, Wenbin Liu, Huamin Kou, Benxue Jiang, Yubai Pan, Xiaonong Cheng, Jingkun Guo (2013). High doping Nd:YAG transparent ceramics fabricated by solid‐state reactive sintering. Physica status solidi. C, Conferences and critical reviews/Physica status solidi. C, Current topics in solid state physics.DOI
  275. Yazhou Zhou, Juan Yang, Shuangbiao Ma, Nan Zhao, Xiaonong Cheng, Tao Zhong (2013). Fabrication of free-standing and flexible silver nanoparticle-graphene films and their surface-enhanced Raman scattering activity. Monatshefte für Chemie - Chemical Monthly.DOI
  276. Jianmei Pan, Xiaonong Cheng, Xuehua Yan, Jianfeng Pan, Chenghua Zhang, Qingbo Lu (2013). Synthesis and growth of SiC/SiO 2 nanocables decorated with laminated porous ceramics from filter paper and polymericprecursor. Ceramics International.DOI
  277. Liying Huang, Hui Fang Xu, Yeping Li, Huaming Li, Xiaonong Cheng, Jixiang Xia, Yuanguo Xu, Cai Guobin (2013). Visible-light-induced WO3/g-C3N4 composites with enhanced photocatalytic activity. Dalton Transactions.DOI
  278. Liying Huang, Yeping Li, Hui Fang Xu, Yuanguo Xu, Jixiang Xia, Kun Wang, Huaming Li, Xiaonong Cheng (2013). Synthesis and characterization of CeO2/g-C3N4 composites with enhanced visible-light photocatatalytic activity. RSC Advances.DOI
  279. Yazhou Zhou, Xiaonong Cheng, Juan Yang, Nan Zhao, Shuangbiao Ma, Dan Li, Tao Zhong (2013). Fast and green synthesis of flexible free-standing silver nanoparticles–graphene substrates and their surface-enhanced Raman scattering activity. RSC Advances.DOI
  280. Xiaonong Cheng (2013). Microstructure and Performance of Ceramic Coating Sprayed on Cr12MoV. Rejiagong gongyi.
  281. 徐东,唐冬梅,焦雷,袁宏明,赵国平,程晓农 (2012). Comparative characteristics of yttrium oxide and yttrium nitric acid doping in ZnO varistor ceramics. Journal of Central South University.
  282. Dong Yu Xu, Dong-mei Tang, Yuanhua Lin, Lei Jiao, Guoping Zhao, Xiaonong Cheng (2012). Influence of Yb2O3 doping on microstructural and electrical properties of ZnO-Bi2O3-based varistor ceramics. Journal of Central South University.DOI
  283. 杨娟,周亚洲,赵南,孙磊,程晓农(2012). 纳米银/石墨烯薄膜的制备及表征. 《中国化学会第28届学术年会第5分会场摘要集》.
  284. 杨娟,孙磊,程晓农,周亚洲,赵南(2012). 溶剂热法制备十二胺改性的氧化石墨及其表征. 《江苏大学学报(自然科学版)》.
  285. 周亚洲,杨娟,孙磊,赵南,程晓农(2012). 石墨烯/银复合薄膜的制备及表征. 《无机化学学报》.
  286. 郭幼丹,程晓农(2012). 基于多层复合微观结构的22MnB5钢热成形的力学行为. 《塑性工程学报》.
  287. 徐东,姜斌,焦雷,崔凤单,徐红星,杨永涛,于仁红,程晓农(2012). 溶胶-凝胶法制备Y2O3掺杂ZnO压敏薄膜及其电性能(英文). Transactions of Nonferrous Metals Society of China.
  288. 郭幼丹,程晓农(2012). 10CrNi3MoV船用钢热成形的力学行为与性能研究. 《船舶工程》.
  289. 张成华,张柯,徐红星,宋琪,杨永涛,于仁红,徐东,程晓农(2012). 溶胶-凝胶法制备Ni掺杂CaCu3Ti4O12陶瓷的显微组织及电性能(英文). Transactions of Nonferrous Metals Society of China.
  290. 徐东,唐冬梅,焦雷,袁宏明,赵国平,程晓农(2012). 高能球磨掺杂氧化物粉体和压敏陶瓷粉体对氧化锌压敏陶瓷性能的影响(英文). Transactions of Nonferrous Metals Society of China.
  291. 严学华,尹君,程晓农(2012). 磁控溅射Ta-C-N薄膜摩擦学性能研究. 《硅酸盐通报》.
  292. 黄燕,戴起勋,李冬升,程晓农,陶亚平,刘瑜(2012). 固溶处理对800H合金组织和硬度的影响. 《金属热处理》.
  293. 潘建梅,严学华,程晓农,张成华,徐桂芳(2012). 先驱体转化法制备SiOC多孔木质陶瓷. 《硅酸盐学报》.
  294. 李冬升,戴起勋,程晓农,王荣荣,王国建,高佩(2012). Cr18Ni30Mo2Al3Nb合金的高温抗氧化性能. 《稀有金属材料与工程》.
  295. 程晓农,王荣荣,李冬升,戴起勋,黄燕,刘瑜,陶亚平(2012). 800H合金的高温抗氧化性能. 《材料热处理学报》.
  296. 李冬升,戴起勋,程晓农,邵新中,王国建(2012). 奥氏体不锈钢室温强度和塑性的数值模拟计算. 《材料热处理学报》.
  297. 贲云飞,徐桂芳,杨娟,程晓农(2012). Cu/Ti3SiC2复合材料的制备及其磨损性能研究. 《热加工工艺》.
  298. J.-Z. Lu, K. Luo, Deng-Ke Yang, Xiaonong Cheng, J.-L. Hu, Feng-Ze Dai, H. Qi, Lina Zhang, J.-S. Zhong, Q.-W. Wang, Y.-K. Zhang (2012). Effects of laser peening on stress corrosion cracking (SCC) of ANSI 304 austenitic stainless steel.DOI
  299. Fei Zhou, Qianzhi Wang, Bin Yue, Xuemei Wu, Lanjian Zhuge, Xiaonong Cheng (2012). Mechanical properties and bonding structure of boron carbon nitride films synthesized by dual ion beam sputtering. Materials Chemistry and Physics.DOI
  300. Yazhou Zhou, Juan Yang, Xiaonong Cheng, Nan Zhao, Hong‐Bo Sun, Dan Li (2012). Transparent and conductive reduced graphene oxide/silver nanoparticles multilayer film obtained by electrical self-assembly process with graphene oxide sheets and silver colloid. RSC Advances.DOI
  301. Jianmei Pan, Qingbo Lu, Xiaonong Cheng, Xuehua Yan, Chenghua Zhang (2012). Large‐scale synthesis of SiC nanowires from polysiloxane and wood powder composites. Crystal Research and Technology.DOI
  302. Dongsheng Li, Qixun Dai, Xiaonong Cheng (2012). Numerical Simulation of the Strength and Plasticity Performance in Austenitic Stainless Steel. High Temperature Materials and Processes.DOI
  303. Jianmei Pan, Xiaonong Cheng, Xuehua Yan, Chenghua Zhang (2012). Preparation and hierarchical porous structure of biomorphic woodceramics from sugarcane bagasse. Journal of the European Ceramic Society.DOI
  304. Qinqin Liu, Xiaonong Cheng, Juan Yang (2012). Development of low thermal expansion Sc2(WO4)3containing composites. Materials Technology.DOI
  305. Chenghua Zhang, Ke Zhang, XU Hong-xing, Qi Song, Yong-tao Yang, Renhong Yu, Dong Yu Xu, Xiaonong Cheng (2012). Microstructure and electrical properties of sol–gel derived Ni-doped CaCu3Ti4O12 ceramics. Transactions of Nonferrous Metals Society of China.DOI
  306. Jiexiang Xia, Hua Liu, Xiaonong Cheng, Sheng Yin, Huaming Li, Hui Fang Xu, Li Xu, Ye Qiu (2012). Reactable ionic liquid synthesis and visible-light photocatalytic activity of dendritic ferric oxide hierarchical structures. Micro & Nano Letters.DOI
  307. Qinqin Liu, Shuai Sun, Haohua Li, Xiaofei Yang, Hao Shen, Xiaonong Cheng, Shubin Dong (2012). Preparation, characterization and photocatalytic activities of ZrWMoO8/Ag composites with core–shell structure. Applied Surface Science.DOI
  308. Xiujuan Sun, Xiaonong Cheng, Juan Yang, Qinqin Liu (2012). Effect of acids on the morphology and negative thermal expansion analysis of ZrW2O8 powders prepared by the hydrothermal method. Ceramics International.DOI
  309. Jianmei Pan, Xuehua Yan, Xiaonong Cheng, Qingbo Lu, Mingsong Wang, Chenghua Zhang (2012). Preparation of SiC nanowires-filled cellular SiCO ceramics from polymeric precursor. Ceramics International.DOI
  310. Dong Yu Xu, Dong-mei Tang, Lei Jiao, Hongming Yuan, Guoping Zhao, Xiaonong Cheng (2012). Effects of high-energy ball milling oxide-doped and varistor ceramic powder on ZnO varistor. Transactions of Nonferrous Metals Society of China.DOI
  311. Yazhou Zhou, Juan Yang, Xiaonong Cheng, Nan Zhao, Lei Sun, Hong‐Bo Sun, Dan Li (2012). Electrostatic self-assembly of graphene–silver multilayer films and their transmittance and electronic conductivity. Carbon.DOI
  312. Mingsong Wang, Weiqiang Liang, Yunfeng Yang, Juan Yang, Xiaonong Cheng, Sung Hong Hahn, Eui Jung Kim (2012). Sol-gel derived transparent conducting ZnO:Al thin films: Effect of crystallite orientation on conductivity and self-assembled network texture. Materials Chemistry and Physics.DOI
  313. Junjun Zhu, Juan Yang, Xiaonong Cheng (2012). ChemInform Abstract: Synthesis and Tunable Thermal Expansion Property of Al2‐δScδW3O12. ChemInform.DOI
  314. Dong Yu Xu, Biao Wang, Yuanhua Lin, Lei Jiao, Hongming Yuan, Guoping Zhao, Xiaonong Cheng (2012). Influence of Lu2O3 on electrical and microstructural properties of CaCu3Ti4O12 ceramics. Physica B Condensed Matter.DOI
  315. Dong Yu Xu, Chen Zhang, Yuanhua Lin, Lei Jiao, Hongming Yuan, Guoping Zhao, Xiaonong Cheng (2012). Influence of zinc on electrical and microstructural properties of CaCu3Ti4O12 ceramics prepared by sol–gel process. Journal of Alloys and Compounds.DOI
  316. Juan Yang, Yazhou Zhou, Lei Sun, Nan Zhao, Chuanliang Zang, Xiaonong Cheng (2012). Synthesis, characterization and optical property of graphene oxide films. Applied Surface Science.DOI
  317. Xiaonong Cheng (2012). Tribological Properties of Ta-C-N Thin Film Deposited by Magnetron Sputtering. Guisuanyan tongbao.
  318. Xiaonong Cheng (2012). Preparation of Cu/Ti_3SiC_2 and Its Wear Property. Rejiagong gongyi.
  319. 郭幼丹,吴春笃,程晓农(2011). 基于相变与回弹的热冲压成形冷却过程控制. 《塑性工程学报》.
  320. 刘红飞,张志萍,张伟,陈小兵,程晓农(2011). 射频磁控溅射制备负热膨胀ZrW2O8薄膜的应力特性研究. 《真空科学与技术学报》.
  321. 潘建梅,严学华,程晓农,张成华,徐桂芳(2011). 生物形态木质陶瓷的摩擦学性能研究. 《摩擦学学报(中英文)》.
  322. 张伟,刘红飞,陈小兵,程晓农(2011). Al2Mo3O12的制备及其负热膨胀性能研究. 《硅酸盐通报》.
  323. 郭幼丹,程晓农,吴春笃(2011). 10CrNi3MoV船用钢热冲压成形工艺与冷却速度研究. 《船舶工程》.
  324. 刘芹芹,程晓农,杨娟,孙秀娟,臧传亮(2011). ZrW2-xMoxO8晶体结构及热膨胀性能. 《江苏大学学报(自然科学版)》.
  325. 郝欣妮,许晓静,陈丹,于春杭,邵红红,程晓农(2011). Ti表面高承载摩擦学SiC薄膜的研究. 《机械设计与制造》.
  326. 房士义,许晓静,周海,王彬,潘励,程晓农(2011). 等通道转角变形与固溶处理对铸态7085铝合金微观组织的影响. 《机械设计与制造》.
  327. 张福豹,许晓静,吴桂潮,王彬,罗勇,宋涛,程晓农(2011). 锆微合金化6013型铝合金的抗晶间腐蚀性能. 《航空材料学报》.
  328. 许晓静,吴桂潮,王彬,张福豹,罗勇,宋涛,成城,潘励,程晓农(2011). 7085铝合金固溶温度预热后的大应变变形强化. 《上海交通大学学报》.
  329. 许晓静,吴桂潮,王彬,张福豹,罗勇,宋涛,成城,潘励,程晓农(2011). 含Sr7085型铝合金的晶间腐蚀和剥落腐蚀性能. 《材料热处理学报》.
  330. 许晓静,王彬,吴桂潮,张福豹,宋涛,罗勇,程晓农(2011). 锶微合金化高锌2099型铝合金抗晶间腐蚀及剥蚀性能. 《稀有金属材料与工程》.
  331. 朱君君,杨娟,程晓农(2011). 烧结温度对Sc2(MoO4)3负热膨胀性能的影响. 《硅酸盐学报》.
  332. 李军,刘芹芹,杨娟,程晓农,朱君君(2011). A2(WO4)3(A:Al,Y,Sc)粉体的制备及热膨胀性能. 《硅酸盐学报》.
  333. 李孟伟,严学华,程晓农,李军(2011). 不同层Cu/ZrW2O8梯度薄膜的制备和性能. 《硅酸盐学报》.
  334. 严学华,尹君,程晓农(2011). 氮分压对Ta–N薄膜摩擦性能的影响. 《硅酸盐学报》.
  335. 李亚波,袁凯杰,程晓农,朱儒燕(2011). D2冷作模具钢边部裂纹成因分析. 《热加工工艺》.
  336. 刘红飞,张志萍,张伟,陈小兵,程晓农(2011). 脉冲激光沉积ZrW2O8薄膜的制备和性能. 《无机材料学报》.
  337. 李亚波,程晓农,朱儒燕(2011). 铈对D6冷作模具钢中共晶碳化物的影响. 《铸造技术》.
  338. 朱君君,程晓农,杨娟(2011). Sc2(WO4)3负热膨胀材料合成及其热性能. 《功能材料》.
  339. 徐红星,程晓农,许晓静,宋刚,莫纪平(2011). 超细亚晶粒铝合金的强化机理. 《江苏大学学报(自然科学版)》.
  340. 李冬升,戴起勋,程晓农,陈祖伟,高佩,刘瑜(2011). 奥氏体不锈钢Cr18Ni3Mn11Cu3NbN高温抗氧化性能. 《材料热处理学报》.
  341. Qinqin Liu, Xiaonong Cheng, Juan Yang, Xiujuan Sun (2011). Fabrication of negative thermal expansion ZrMo2O8 film by sol–gel method. Materials Science and Engineering B.DOI
  342. Junjun Zhu, Juan Yang, Xiaonong Cheng (2011). Synthesis and tunable thermal expansion property of Al2−δScδW3O12. Solid State Sciences.DOI
  343. Qinqin Liu, Juan Yang, Xiaonong Cheng, Guoshan Liang, Xiujuan Sun (2011). Preparation and characterization of negative thermal expansion Sc2W3O12/Cu core–shell composite. Ceramics International.DOI
  344. Dong Yu Xu, Xiaonong Cheng, Hongming Yuan, Juan Yang, Yuanhua Lin (2011). Microstructure and electrical properties of Y(NO3)3·6H2O-doped ZnO–Bi2O3-based varistor ceramics. Journal of Alloys and Compounds.DOI
  345. Qinqin Liu, Juan Yang, Xiaonong Cheng, Xiujuan Sun, Chuanliang Zang (2011). Abnormal positive thermal expansion in Mo substituted ZrW2O8. Physica B Condensed Matter.DOI
  346. Hongfei Liu, Zhiping Zhang, Wei Zhang, Xiaobin Chen, Xiaonong Cheng (2011). Negative thermal expansion ZrW2O8 thin films prepared by pulsed laser deposition. Surface and Coatings Technology.DOI
  347. Juan Yang, Chuanliang Zang, Lei Sun, Nan Zhao, Xiaonong Cheng (2011). Synthesis of graphene/Ag nanocomposite with good dispersibility and electroconductibility via solvothermal method. Materials Chemistry and Physics.DOI
  348. Xiaonong Cheng (2011). Effects of Sintering Temperature on Negative Thermal Expansion Properties of Sc_2(MoO_4)_3. Guisuanyan xuebao.
  349. Xiaonong Cheng (2011). Study on Synthesis and Negative Thermal Expansion Properties of Al_2Mo_3O_(12). Guisuanyan tongbao.
  350. Xiaonong Cheng (2011). Synthesis and Characterization of Monodispersed Graphene via Hydrothermal Method. Cailiao daobao.
  351. Xiaonong Cheng (2011). Effects of N_2 Partial Pressure on Tribological Properties of Ta-N Thin Films. Guisuanyan xuebao.
  352. Guirong Li, Hongming Wang, Yutao Zhao, Dengbin Chen, Gang Chen, Xiaonong Cheng (2010). Microstructure of in situ Al3Ti/6351Al composites fabricated with electromagnetic stirring and fluxes. Transactions of Nonferrous Metals Society of China.DOI
  353. 徐驰,严学华,李孟伟,李军,程晓农(2010). 铜/钨酸锆功能梯度薄膜的热应力场特征有限元分析. 《硅酸盐学报》.
  354. 房士义,许晓静,周海,潘励,韦宝存,程晓农(2010). 等通道转角变形对电解铝液直接生产6063铝合金组织的影响. 《机械设计与制造》.
  355. 徐东,程晓农,赵国平,严学华,施利毅(2010). 烧结方式对ZnO-Bi2O3压敏瓷Bi2O3挥发的影响. 《中国有色金属学报》.
  356. 杨娟,刘芹芹,程晓农,孙秀娟(2010). ZrO2/β-ZrWMoO8可控热膨胀复合材料的制备. 《江苏大学学报(自然科学版)》.
  357. 许晓静,韦宝存,房士义,程晓农(2010). 铝合金大厚板淬火残余应力数值分析. 《江苏大学学报(自然科学版)》.
  358. 黄照军,程晓农,顾冬青,赵国平,李孟伟(2010). Cu-Zn-Sn-Mn低熔点合金的设计. 《铸造》.
  359. 程晓农,戴起勋,李冬升(2010). 核电装备关键管材新材料研究进展. 《金属热处理》.
  360. 陈祖伟,戴起勋,李冬升,程晓农,陈康敏(2010). Cr18Ni9Cu3NbN奥氏体不锈钢的性能研究. 《金属热处理》.
  361. 李丹,李冬升,戴起勋,程晓农,华杨康,刘瑜,邵新中(2010). 超超临界火电用Super304H不锈钢管的组织分析. 《金属热处理》.
  362. 刘芹芹,程晓农,杨娟,孙秀娟(2010). 湿化学法合成可控热膨胀ZrWMoO8陶瓷复合材料. 《功能材料》.
  363. 李丹,程晓农,李冬升,华杨康,邵新中,戴起勋,刘瑜(2010). 超(超)临界火电机组用高加管的国产化. 《机械工程材料》.
  364. Dong Yu Xu, Xiaonong Cheng, Guoping Zhao, Juan Yang, Liyi Shi (2010). Microstructure and electrical properties of Sc2O3-doped ZnO–Bi2O3-based varistor ceramics. Ceramics International.DOI
  365. Qinqin Liu, Xiaonong Cheng, Juan Yang, Xiujuan Sun (2010). Influence of fabrication method on the structure and thermal expansion property of ZrWMoO8 and its composites. Journal of Materials Science.DOI
  366. Mingsong Wang, Zhijie Xu, Longfei Ge, Eui Jung Kim, Sung Hong Hahn, Juan Yang, Xiaonong Cheng (2010). Texture-controlled growth of ZnO nanorods/films by aluminum ion and solvent. Journal of Alloys and Compounds.DOI
  367. Juan Yang, Yong-Sen Yang, Qinqin Liu, Guifang Xu, Xiaonong Cheng (2010). Preparation of Negative Thermal Expansion ZrW2O8 Powders and Its Application in Polyimide/ZrW2O8 Composites. Journal of Material Science and Technology.DOI
  368. Juan Yang, Chuanliang Zang, Guoxiu Wang, Guifang Xu, Xiaonong Cheng (2010). Synthesis of CdSe microspheres via solvothermal process in a mixed solution. Journal of Alloys and Compounds.DOI
  369. Xiaonong Cheng (2010). FINITE ELEMENT ANALYSIS OF THERMAL STRESS FIELDS OF COPPER/ZIRCONIUM TUNGSTATE FUNCTIONALLY GRADED FILMS. Guisuanyan xuebao.
  370. Xiaonong Cheng (2010). Microstructure and Electrical Properties of Sc_2O_3-doped ZnO Varistor Ceramics. Insulators and Surge Arresters.
  371. 刘红飞,张志萍,程晓农(2009). 射频磁控溅射ZrW2O8薄膜的高温退火研究. 《稀有金属材料与工程》.
  372. 程晓农(2009). ZrW 2 O 8 系列负热膨胀性化合物的研究. 《2009中国功能材料科技与产业高层论坛》.
  373. 王宏明,李桂荣,赵玉涛,程晓农,陈刚(2009). DMR法原位合成亚微米Al 2 O 3 /Al复合材料的微结构和功能特征. 《2009中国功能材料科技与产业高层论坛》.
  374. 刘芹芹,程晓农,杨娟,孙秀娟,徐驰(2009). NTE化合物ZrW 0.5 Mo 1.5 O 8 的合成及其性能研究. 《2009中国功能材料科技与产业高层论坛》.
  375. 李桂荣,王宏明,赵玉涛,程晓农,陈刚(2009). 20wt% Mg 2 Si/Al梯度复合材料的原位合成和凝固组织. 《2009中国功能材料科技与产业高层论坛》.
  376. 程晓农,汝金明,莫纪平,许晓静(2009). 固溶-大应变-后续热处理态AZ31镁合金的组织和性能. 《稀有金属材料与工程》.
  377. 严学华,李炳云,RIEDEL Ralf,程晓农(2009). 先进负热膨胀材料(英文). 《硅酸盐学报》.
  378. 刘红飞,程晓农,张志萍(2009). 脉冲激光沉积法制备ZrW2O8薄膜(英文). 《硅酸盐学报》.
  379. 张志萍,刘红飞,程晓农(2009). 原位反应固相法合成低热膨胀ZrW2O8/ZrO2复合材料. 《功能材料》.
  380. 张志萍,刘红飞,程晓农(2009). 共沉淀法合成近零膨胀ZrW2O8/ZrO2复合陶瓷的致密化. 《复合材料学报》.
  381. 程晓农,李丹,戴起勋,李冬升,吴青松,王志健(2009). 超临界锅炉用不锈钢热处理工艺与组织分析. 《江苏大学学报(自然科学版)》.
  382. 严学华,程晓农,徐桂芳,王春生,李炳云(2009). α-ZrW2O8/Cu复合材料的制备、微观结构和致密度. 《江苏大学学报(自然科学版)》.
  383. 李桂荣,王宏明,赵玉涛,陈刚,戴起勋,程晓农(2009). Al2O3,Al3Zr颗粒增强Al-12%Si基原位复合材料的高温热膨胀性. 《工程科学学报》.
  384. 赵国平,程晓农(2009). 温度梯度条件下糊状区的凝固行为研究. 《材料科学与工艺》.
  385. 韩剑,戴起勋,李桂荣,陈登斌,赵玉涛,刘瑜,陈刚,程晓农(2009). 稀土钇对7055铝合金铸态组织的影响. 《材料工程》.
  386. Dong Yu Xu, Xiaonong Cheng, Xuehua Yan, Hongxin Xu, Liyi Shi (2009). Sintering process as relevant parameter for Bi2O3 vaporization from ZnO-Bi2O3-based varistor ceramics. Transactions of Nonferrous Metals Society of China.DOI
  387. Guifang Xu, Qinqin Liu, Juan Yang, Xiujuan Sun, Xiaonong Cheng (2009). Study on the synthesis of Al2W2MoO12 by a simple stearic acid route and its negative thermal expansion property. Ceramics International.DOI
  388. Mingsong Wang, Xiaonong Cheng, Juan Yang (2009). Controlled visible photoluminescence of ZnO thin films prepared by RF magnetron sputtering. Applied Physics A.DOI
  389. Xiujuan Sun, Juan Yang, Qinqin Liu, Xiaonong Cheng (2009). Influence of sodium dodecyl benzene sulfonate (SDBS) on the morphology and negative thermal expansion property of ZrW2O8 powders synthesized by hydrothermal method. Journal of Alloys and Compounds.DOI
  390. Hongfei Liu, Zhiping Zhang, Xiaonong Cheng, Juan Yang (2009). THERMAL EXPANSION OF ZrO 2- ZrW 2 O 8 COMPOSITES PREPARED USING CO-PRECIPITATION ROUTE. International Journal of Modern Physics B.DOI
  391. Xiaonong Cheng (2009). Solidification behavior of Al-6.0wt% Cu alloy in mushy zone under temperature gradient. Materials Science and Technology.
  392. Xiaonong Cheng (2009). Effect of Addition of Yttrium on As-cast Microstructure of 7055 Aluminum Alloy. Cailiao gongcheng.
  393. Xiaonong Cheng (2009). High-temperature thermal expansion properties of Al_2O_3,Al_3Zr particulate reinforced Al-12%Si in situ matrix composites. Journal of University of Science and Technology Beijing.
  394. Xiaonong Cheng (2009). Densification of nearly-zero-thermal-expansion ZrW_2O_8/ZrO_2 ceramics synthesized by chemical co-precipitation method. Fuhe cailiao xuebao.
  395. 杨娟,杨永森,徐祥宁,刘芹芹,孙秀娟,程晓农(2008). ZrW2O8粉体及ZrW2O8/PI杂化薄膜的制备研究. 《稀有金属材料与工程》.
  396. 刘红飞,程晓农,张志萍(2008). Al 2 O 3 薄膜制备及其性能研究. 《2008全国功能材料科技与产业高层论坛论文集》.
  397. 程晓农,刘芹芹,杨娟,孙秀娟(2008). 花状立方相ZrWMoO 8 粉体的制备及其负热膨胀特性研究. 《2008全国功能材料科技与产业高层论坛论文集》.
  398. 严学华,杨新波,程晓农(2008). 近零膨胀ZrW2O8/ZrO2(Al2O3)复合材料的制备与性能. 《稀有金属材料与工程》.
  399. 孙秀娟,杨娟,刘芹芹,程晓农(2008). 水热法制备负热膨胀性ZrW2O8粉体(英文). 《硅酸盐学报》.
  400. 张志萍,刘红飞,程晓农(2008). 化学共沉淀法合成低热膨胀ZrW2O8/ZrO2复合材料. 《复合材料学报》.
  401. 孙爱民,程晓农(2008). 汽车面板用铝合金的研究现状. 《轻金属》.
  402. 李桂荣,陈瑞泷,赵玉涛,王宏明,陈刚,戴起勋,程晓农(2008). 铝基复合材料原位合成过程的熔体表观粘度特征. 《特种铸造及有色合金》.
  403. 刘红飞,张志萍,程晓农(2008). 制备方法对ZrO2-ZrW2O8复合材料的微观结构和热膨胀性能的影响. 《功能材料》.
  404. 周峰,程晓农,严学华,王萍(2008). 原位反应烧结法制备SiC多孔木材陶瓷. 《材料科学与工程学报》.
  405. 刘芹芹,杨娟,孙秀娟,程晓农(2008). 水热法制备负热膨胀性超细ZrMo2O8粉体. 《稀有金属材料与工程》.
  406. 刘囝,程晓农,温晓静,潘秋红(2008). 均匀化退火工艺对1100铝带材织构及制耳率的影响. 《机械工程材料》.
  407. 刘红飞,程晓农,张志萍,付廷波(2008). 负热膨胀ZrW2O8薄膜的制备和性能. 《材料研究学报》.
  408. 林东洋,赵玉涛,甘俊旗,程晓农,戴起勋(2008). 钛合金表面磁控溅射制备HA/YSZ梯度涂层. 《材料工程》.
  409. 刘红飞,程晓农,张志萍,付廷波(2008). 工艺参数和热处理温度对ZrW2O8薄膜制备的影响. 《真空科学与技术学报》.
  410. 徐桂芳,程晓农,严学华,杨娟,肖兆娟(2008). 热处理工艺对ZrW2O8薄膜组成与形态的影响(英文). 《硅酸盐学报》.
  411. 汪建敏,陆晋,李新城,程晓农,许晓静(2008). 基于等通道角挤压工艺制备超细晶中碳钢. 《材料热处理学报》.DOI
  412. 张志萍,刘红飞,程晓农(2008). 共沉淀法合成ZrO2-ZrW2O8复合材料的工艺研究. 《无机材料学报》.
  413. 雷玉成,李贤,陈刚,程晓农,张建会(2008). Ti-Mg对SiCp/Al复合材料等离子弧原位焊接性能的影响. 《江苏大学学报(自然科学版)》.
  414. 李桂荣,王宏明,赵玉涛,陈刚,戴起勋,程晓农(2008). 低频电磁场下原位合成Al-Zr-O系复合材料机制研究. 《材料科学与工艺》.
  415. Juan Yang, Guoxiu Wang, Hao Liu, Jinsoo Park, Xiaonong Cheng (2008). Controlled synthesis and characterization of ZnSe nanostructures via a solvothermal approach in a mixed solution. Materials Chemistry and Physics.DOI
  416. Songli Zhang, Yutao Zhao, Gang Chen, Xiaonong Cheng (2008). Interface structures of the (Al2O3+Al3Zr)/A356 nanocomposites fabricated by magnetochemistry in situ reaction. Journal of Alloys and Compounds.DOI
  417. Qinqin Liu, Juan Yang, Xiujuan Sun, Xiaonong Cheng (2008). Morphology control and negative thermal expansion in cubic ZrWMoO8 powders. physica status solidi (b).DOI
  418. Hongfei Liu, Xiaonong Cheng, Zhiping Zhang (2008). Preparation and properties of negative thermal expansion zirconium tungstate thin films deposited by radio frequency magnetron sputtering. physica status solidi (b).DOI
  419. Songli Zhang, Yutao Zhao, Gang Chen, Xiaonong Cheng (2008). (Al2O3+Al3Zr)/A356 nanocomposites fabricated by magnetochemistry in situ reaction. Journal of Alloys and Compounds.DOI
  420. Juan Yang, Guoxiu Wang, Hao Liu, Jinsoo Park, Xinglong Gou, Xiaonong Cheng (2008). Solvothermal synthesis and characterization of ZnSe nanoplates. Journal of Crystal Growth.DOI
  421. Xifeng Zhang, Xiaonong Cheng, Hengbo Yin, Jian An Yuan, Chi Xu (2008). Preparation of needle shaped nano-copper by microwave-assisted water system and study on its application of enhanced epoxy resin coating electrical conductivity. Applied Surface Science.DOI
  422. Songli Zhang, Yutao Zhao, Xiaonong Cheng, Gang Chen, Qixun Dai (2008). High-energy ultrasonic field effects on the microstructure and mechanical behaviors of A356 alloy. Journal of Alloys and Compounds.DOI
  423. Juan Yang, Qinqin Liu, Xiujuan Sun, Guifang Xu, Xiaonong Cheng (2008). Synthesis of negative thermal expansion materials ZrW2−xMoxO8 (0≤x≤2) using hydrothermal method. Ceramics International.DOI
  424. Yutao Zhao, Songli Zhang, Gang Chen, Xiaonong Cheng, Qixun Dai (2008). (ZrB2+Al2O3+Al3Zr)p/Al–4Cu composite synthesized by magneto-chemical melt reaction. Materials Science and Engineering A.DOI
  425. Xinbo Yang, Xiaonong Cheng, Hongjun Li, Jun Xu, Xiujuan Sun (2008). Thermal and electric conductivity of near-zero thermal expansion ZrW2O8/ZrO2 composites. Journal of the Ceramic Society of Japan.DOI
  426. Xiaonong Cheng (2008). RESEARCH ON ANTI-BULLET PROPERTIES OF CONTINUOUS BASALT FIBER REINFORCED COMPOSITES. Fiber Reinforced Plastics/Composites.
  427. Xiaonong Cheng (2008). SYNTHESIS OF NEGATIVE THERMAL EXPANSION ZrW_2O_8 POWDER USING THE HYDROTHERMAL METHOD. Guisuanyan xuebao.
  428. Xiaonong Cheng (2008). Synthesis of ZrW_2O_8/ZrO_2 composites with low thermal expansion using chemical co-precipitation method. Fuhe cailiao xuebao.
  429. Xiaonong Cheng (2008). Recent progress of research on aluminium alloys for automobile body sheets. Light Metals.
  430. Xiaonong Cheng (2008). Effects of preparation method on microstructure and thermal expansion property of ZrO_2-ZrW_2O_8 composites. Journal of Functional Biomaterials.
  431. Xiaonong Cheng (2008). Research Advances in Thermal Expansion Properties of Epoxy Molding Compounds. Cailiao daobao.
  432. Xiaonong Cheng (2008). Mechanism of in situ fabricating composites in the system of Al-Zr-O in low frequency electromagnetic field. Materials Science and Technology.
  433. Xiaonong Cheng (2008). Study on Negative Thermal Expansion Property of ZrW_2O_8 Synthesized by Different Cooling Methods. Guisuanyan tongbao.
  434. 杨新波,程晓农,严学华(2007). ZrW2O8/ZrO2可控热膨胀复合材料的制备. 《复合材料学报》.
  435. 程晓农,王春生,严学华,邱杰(2007). 铜包覆钨酸锆复合粉体的制备. 《硅酸盐学报》.
  436. 许晓静,程晓农(2007). 高强度、高应变速率超塑性铸锭铝合金AI-Cu-Mg-Ti-Sr. 《大型飞机关键技术高层论坛暨中国航空学会2007年学术年会》.
  437. 刘芹芹,杨娟,孙秀娟,程晓农(2007). 负热膨胀ZrW1.7Mo0.3O8粉体的水热合成研究. 《无机材料学报》.
  438. 许晓静,程晓农(2007). 固溶-大变形-时效路线制备超高强度高塑性纳米结构铝合金. 《大型飞机关键技术高层论坛暨中国航空学会2007年学术年会》.
  439. 屈展,杨新波,程晓农(2007). 固相法制备Al2(WO4)3粉体及其负热膨胀性能. 《机械工程材料》.
  440. 刘红飞,程晓农,张志萍,付廷波(2007). 工艺参数和热处理温度对ZrW 2 O 8 薄膜制备的影响. 《TFC'07全国薄膜技术学术研讨会》.
  441. 付廷波,程晓农,严学华,刘红飞(2007). 磁控溅射法制备ZrW2O8薄膜及其性能. 《机械工程材料》.
  442. 李桂荣,王利,赵玉涛,戴起勋,王宏明,程晓农,陈刚(2007). 电磁场作用下(Al2O3+Al3Zr)p/Al复合材料的梯度效应. 《特种铸造及有色合金》.
  443. 程晓农,宋娟,严学华(2007). 磁控溅射法制备ZrW 2 O 8 /Cu梯度薄膜. 《《硅酸盐学报》创刊50周年暨中国硅酸盐学会2007年学术年会论文摘要集》.
  444. 汪小燕,赵玉涛,陈刚,程晓农,张红杰,章照(2007). Al-K2ZrF6体系熔体反应法合成复合材料的微观组织和力学性能. 《稀有金属材料与工程》.
  445. 程晓农,宋刚,莫纪平,徐红星,许晓静(2007). 强化固溶态2024铝合金ECAP加工后的拉伸性能. 《江苏大学学报(自然科学版)》.
  446. 程晓农,付廷波,杨新波,严学华(2007). ZrO2粒径对ZrO2/ZrW2O8复合材料性能的影响. 《江苏大学学报(自然科学版)》.
  447. 张志萍,刘红飞,程晓农(2007). 共沉淀法合成近零膨胀ZrO 2 -ZrW 2 O 8 复合材料. 《《硅酸盐学报》创刊50周年暨中国硅酸盐学会2007年学术年会论文摘要集》.
  448. 程晓农,王春生,严学华,邱杰(2007). Cu包覆ZrW 2 O 8 复合粉体的制备. 《《硅酸盐学报》创刊50周年暨中国硅酸盐学会2007年学术年会论文摘要集》.
  449. 张志萍,刘红飞,程晓农(2007). 近零膨胀ZrO 2 -ZrW 2 O 8 复合材料的制备和表征. 《第六届中国功能材料及其应用学术会议论文集(8)》.
  450. 杨新波,程晓农,严学华,付廷波(2007). 负热膨胀材料ZrW2O8及其复合材料研究进展. 《材料科学与工程学报》.
  451. 孙秀娟,杨娟,刘芹芹,程晓农(2007). 共沉淀法制备不同粒径的ZrW 2 O 8 粉体及其负热膨胀特性的分析(英文). 《第六届中国功能材料及其应用学术会议论文集(8)》.
  452. 刘芹芹,杨娟,孙秀娟,程晓农(2007). 超细ZrW 2 O 8 的制备及其NTE特性的研究(英文). 《第六届中国功能材料及其应用学术会议论文集(8)》.
  453. 程晓农,邱杰,严学华,王春生(2007). 非均匀沉淀法制备Cu包覆ZrW 2 O 8 复合粉体的研究. 《第六届中国功能材料及其应用学术会议论文集(8)》.
  454. 雷玉成,朱飞,袁为进,程晓农(2007). SiCp/6061 Al复合材料等离子弧焊工艺参数对焊缝组织及性能的影响. 《焊接学报》.
  455. 雷玉成,朱强,陈炜,程晓农(2007). 高强度钢差厚板激光拼焊焊缝成形及组织分析. 《焊接学报》.
  456. 周立,李冬升,程晓农(2007). 锶合金化在镁合金中的作用. 《轻金属》.
  457. 雷玉成,李贤,陈刚,张建会,程晓农(2007). N2在等离子弧原位焊接SiCp/Al基复合材料中的作用. 《中国有色金属学报》.
  458. 张志萍,刘红飞,程晓农(2007). ZrW2O8可控热膨胀系数复合材料的研究进展. 《材料导报》.
  459. Y.T. Zhao, S.-L. Zhang, Guan‐Hua Chen, Xiaonong Cheng, C.-Q. Wang (2007). In situ (Al2O3+Al3Zr)np/Al nanocomposites synthesized by magneto-chemical melt reaction. Composites Science and Technology.DOI
  460. Qinqin Liu, Juan Yang, Xiujuan Sun, Xiaonong Cheng (2007). Preparation and characterization of ZrWMoO8 powders with different morphologies. Frontiers of Chemistry in China.DOI
  461. Songli Zhang, Yutao Zhao, Gang Chen, Xiaonong Cheng, Sun Hong-qiang (2007). Preparation and electrode behavior of NdMgNi3.6Co0.4 hydrogen storage alloy. Journal of Materials Processing Technology.DOI
  462. Zhizhong Yuan, Qixun Dai, Xiaonong Cheng, Kangmin Chen, Wenwei Xu (2007). Impact properties of high-nitrogen austenitic stainless steels. Materials Science and Engineering A.DOI
  463. Xinbo Yang, Jun Xu, Hongjun Li, Xiaonong Cheng, Xuehua Yan (2007). In Situ Synthesis of ZrO 2 /ZrW 2 O 8 Composites With Near‐Zero Thermal Expansion. Journal of the American Ceramic Society.DOI
  464. Yutao Zhao, Songli Zhang, Gang Chen, Xiaonong Cheng, Qixun Dai (2007). Dynamics responses of the in situ magnetochemistry reaction for Al-Zr(CO3)2 system. Journal of Alloys and Compounds.DOI
  465. Yutao Zhao, Songli Zhang, Gang Chen, Xiaonong Cheng (2007). Effects of molten temperature on the morphologies of in situ Al3Zr and ZrB2 particles and wear properties of (Al3Zr+ZrB2)/Al composites. Materials Science and Engineering A.DOI
  466. Yucheng Lei, Wei-jin YUAN, Xizhang Chen, Fei Zhu, Xiaonong Cheng (2007). In-situ weld-alloying plasma arc welding of SiCp/Al MMC. Transactions of Nonferrous Metals Society of China.DOI
  467. Qinqin Liu, Juan Yang, Xiujuan Sun, Xiaonong Cheng, Guifang Xu, Xuehua Yan (2007). Preparation and characterization of ZrWMoO8 powders with different morphologies using hydrothermal method. Journal of Materials Science.DOI
  468. Xiaonong Cheng (2007). Research Progress in the Preparation and Application of Polyimide Composite Films with Low Thermal Expansion Coefficient. Cailiao daobao.
  469. Xiaonong Cheng (2007). Effect of nitrogen on plasma arc in-situ welding of SiC_p/Al MMCs. The Chinese Journal of Nonferrous Metals.
  470. Xiaonong Cheng (2007). Study on electrical properties of ZrW_2O_8/E—51 electronic casting composite materials. Electronic Components and Materials.
  471. Xiaonong Cheng (2007). Role of Strontium Alloying in Magnesium Alloys. Light Metals.
  472. Xiaonong Cheng (2007). Advances in Research on ZrW2O8 Composites with Controllable Coefficient of Thermal Expansion. Cailiao daobao.
  473. Xiaonong Cheng (2007). Preparing Fibrillar Nickel Nanocrystals by Liquor-phase Reduction. Jiangsu Chemical Industry.
  474. Xiaonong Cheng (2007). Effect of welding parameters on microstructure and mechanical propertes of welded joint in PAW of SiCp/6061Al. Transactions of the China Welding Institution.
  475. 雷玉成,李彩辉,郁雯霞,程晓农(2006). 钨极氮弧焊焊接电弧数值分析. 《江苏大学学报(自然科学版)》.
  476. 雷玉成,李贤,张建会,袁为进,程晓农(2006). SiCp/Al MMCs等离子弧原位焊接接头组织与性能. 《江苏大学学报(自然科学版)》.
  477. 孙秀娟,杨娟,刘芹芹,程晓农(2006). 溶胶凝胶法制备超细负热膨胀性ZrW2O8粉体. 《功能材料》.
  478. 严学华,程晓农,李长生,Ralf Hauser,Ralf Riedel(2006). 金属/聚合物转化陶瓷复合材料的原位反应合成和磁学性能研究. 《功能材料》.
  479. 刘芹芹,杨娟,孙秀娟,程晓农(2006). 负热膨胀材料立方ZrMo2O8的制备研究. 《稀有金属材料与工程》.
  480. 雷玉成,郁雯霞,李彩辉,程晓农(2006). 不预热情况下的紫铜TIG焊熔池温度场的数值模拟. 《焊接学报》.
  481. 雷玉成,李彩辉,郁雯霞,程晓农(2006). 氮氩气体保护TIG焊接电弧数值分析. 《焊接学报》.
  482. 肖兆娟,程晓农,严学华(2006). 磁控溅射法制备钨酸锆薄膜. 《硅酸盐学报》.
  483. 严学华,杨新波,程晓农,付廷波,邱杰,刘红飞(2006). 燃烧法合成高纯度负热膨胀材料ZrW2O8粉体. 《硅酸盐学报》.
  484. 雷玉成,朱飞,袁为进,程晓农(2006). Ti对SiCp/Al等离子弧焊焊缝组织的影响. 《材料科学与工艺》.
  485. 章照,赵玉涛,程晓农,戴起勋,陈刚(2006). Al-Zr-B体系反应合成复合材料的组织和性能. 《特种铸造及有色合金》.DOI
  486. 李桂荣,赵玉涛,戴起勋,程晓农,曹建峰,王宏明,刘忠德,陈刚(2006). 铸造工艺对(Al3Zr+Al2O3)p/A356原位复合材料组织和性能的影响. 《中国有色金属学报》.
  487. 李彩辉,雷玉成,郁雯霞,程晓农(2006). 氮氩气体保护的TIG焊接电弧等离子体流场的数值分析. 《焊接技术》.
  488. 李桂荣,赵玉涛,戴起勋,程晓农,曹健峰,柏立庆(2006). 电磁搅拌合成(Al2O3+Al3Zr)p/Al复合材料的净化机制与性能. 《机械工程材料》.
  489. 李冬升,程晓农,李丹(2006). 微量钛、硼对AM50镁合金组织和性能的影响. 《机械工程材料》.
  490. 李桂荣,赵玉涛,戴起勋,程晓农,王宏明,刘忠德,陈刚(2006). 挤压铸造颗粒增强铝基复合材料的凝固组织. 《特种铸造及有色合金》.
  491. Songli Zhang, Yutao Zhao, Gang Chen, Xiaonong Cheng (2006). Microstructures and dry sliding wear properties of in situ (Al3Zr+ZrB2)/Al composites. Journal of Materials Processing Technology.DOI
  492. Aili Wang, Dong Liu, Hengbo Yin, Huixiong Wu, Yuji Wada, Min Ren, Tingshun Jiang, Xiaonong Cheng, Yiqing Xu (2006). Size-controlled synthesis of hydroxyapatite nanorods by chemical precipitation in the presence of organic modifiers. Materials Science and Engineering C.DOI
  493. Songli Zhang, Yutao Zhao, Gang Chen, Xiaonong Cheng, Huo Xiao-yang (2006). Fabrication and dry sliding wear behavior of in situ Al–K2ZrF6–KBF4 composites reinforced by Al3Zr and ZrB2 particles. Journal of Alloys and Compounds.DOI
  494. Zhaojuan Xiao, Xiaonong Cheng, Xuehua Yan (2006). Effect of post-deposition annealing on ZrW2O8 thin films prepared by radio frequency magnetron sputtering. Surface and Coatings Technology.DOI
  495. Hongxin Xu, Xiaonong Cheng, Gang Song, J.P. Mo, Xiaojing Xu (2006). WITHDRAWN: Effect of Ecap on Mechanical properties of 2024 Al alloy. Materials Science and Engineering A.DOI
  496. Aili Wang, Hengbo Yin, Dong Liu, Huixiong Wu, Min Ren, Tingshun Jiang, Xiaonong Cheng, Yiqing Xu (2006). Size-controlled synthesis of hydroxyapatite nanorods in the presence of organic modifiers. Materials Letters.DOI
  497. Aili Wang, Hengbo Yin, Dong Liu, Huixiong Wu, Yuji Wada, Min Ren, Yiqing Xu, Tingshun Jiang, Xiaonong Cheng (2006). Effects of organic modifiers on the size-controlled synthesis of hydroxyapatite nanorods. Applied Surface Science.DOI
  498. Yucheng Lei, YU Wen-xia, LI Cai-hui, Xiaonong Cheng (2006). Simulation on temperature field of TIG welding of copper without preheating. Transactions of Nonferrous Metals Society of China.DOI
  499. Xiaonong Cheng, Xifeng Zhang, Hengbo Yin, Aili Wang, Yiqing Xu (2006). Modifier effects on chemical reduction synthesis of nanostructured copper. Applied Surface Science.DOI
  500. Songli Zhang, Yutao Zhao, Gang Chen, Xiaonong Cheng, Qixun Dai (2006). Microstructures and mechanical properties of aluminum matrix composites fabricated from Al–xwt.% Zr(CO3)2 (x=5, 10, 15, 20, 25) systems. Journal of Alloys and Compounds.DOI
  501. Xifeng Zhang, Hengbo Yin, Xiaonong Cheng, Huifeng Hu, Qi Yu, Aili Wang (2006). Effects of various polyoxyethylene sorbitan monooils (Tweens) and sodium dodecyl sulfate on reflux synthesis of copper nanoparticles. Materials Research Bulletin.DOI
  502. Xiaonong Cheng (2006). Numerical analysis on nitrogen protecting of TIG welding arc. Journal of Jiangsu University.
  503. Xiaonong Cheng (2006). The Development of Creep Resistant Magnesium Alloys. Cailiao daobao.
  504. Xiaonong Cheng (2006). Numerical analysis of N_2-Ar protecting tungsten inert gas welding arc. Transactions of the China Welding Institution.
  505. Xiaonong Cheng (2006). Microstructure and mechanical properties of welds during plasma arc "in-situ"welding of SiCp/Al MMCs. Journal of Jiangsu University.
  506. Xiaonong Cheng (2006). Effect of Ti on weld microstructure of PAW SiCp/Al MMCs. Materials Science and Technology.
  507. Xiaonong Cheng (2006). Wear Property of PTFE Composites Reinforced by Glass Fibers and Graphite. Gōsei jushi.
  508. Xiaonong Cheng (2006). Preparation of ZrW_2O_8 Using Solid State Method and Characterization of Negative Thermal Expansion Properties. Cailiao gongcheng.
  509. Xiaonong Cheng (2006). Synthesize negative thermal expansion material ZrW_2O_8 superfine-powders using sol-gel chemistry method. Journal of Functional Biomaterials.
  510. Xiaonong Cheng (2006). Numerical simulation of molten pool temperature field for TIG welding of pure copper without preheating. Transactions of the China Welding Institution.
  511. 朱延山,赵玉涛,戴起勋,程晓农,李桂荣,冯钦(2005). Al-ZrOCl2-B2O3体系反应合成复合材料研究. 《特种铸造及有色合金》.DOI
  512. 江润莲,赵玉涛,戴起勋,程晓农,陈刚(2005). Al-Zr-O体系反应合成原位复合材料的微结构与磨损特性. 《中国有色金属学报》.
  513. 朱延山,赵玉涛,戴起勋,程晓农,李桂荣,冯钦(2005). Al-Zr(CO3)2体系熔体反应合成(Al3Zr+Al2O3)/Al复合材料的热力学与动力学机制. 《铸造》.
  514. 赵玉涛,孙建祥,戴起勋,程晓农,林东洋(2005). Al-Zr(CO3)2体系反应合成复合材料的反应机制及动力学模型. 《中国有色金属学报》.
  515. 雷玉成,郁雯霞,李彩辉,张成,程晓农(2005). GMAW温度场计算及其焊接质量的特征建模. 《江苏大学学报(自然科学版)》.
  516. Xifeng Zhang, Hengbo Yin, Xiaonong Cheng, Zhonggui Jiang, Xin Jie Zhao, Aili Wang (2005). Modifying effects of polyethylene glycols and sodium dodecyl sulfate on synthesis of Ni nanocrystals in 1,2-propanediol. Applied Surface Science.DOI
  517. Xiaonong Cheng (2005). Calculation of temperature field and modeling of welding quality for GMAW. Journal of Jiangsu University.
  518. 郑成琪,程晓农(2004). CuAlMn形状记忆合金微观组织对阻尼性能的影响. 《铸造》.
  519. 郑成琪,程晓农(2004). CuAlMn形状记忆合金的高阻尼特性. 《中国有色金属学报》.
  520. 孙建祥,赵玉涛,戴起勋,程晓农,蔡兰(2004). Al-Zr(CO3)2体系反应合成复合材料的力学性能与断裂行为①. 《中国有色金属学报》.
  521. 江润莲,赵玉涛,戴起勋,程晓农,纪嘉明,朱延山,冯钦(2004). A359-Zr(CO3)2体系反应合成复合材料的干滑动磨损性能. 《中国有色金属学报》.
  522. 许晓静,徐海卫,张洁,汪建敏,刘忠德,程晓农,蔡兰(2004). 铸锭铝合金Al-Cu-Mg-Ti高应变速率超塑性. 《第五届中国功能材料及其应用学术会议论文集Ⅱ》.
  523. 徐桂芳,程晓农,司乃潮,李霞章,李玉祥(2004). 不同磨损介质下铜锌铝形状记忆合金滚动磨损性能与磨损机制研究. 《新技术新工艺》.
  524. 雷玉成,张成,程晓农,胡小俊,冯雅明(2004). 基于ANSYS的GMAW温度场计算. 《焊接学报》.
  525. 袁志钟,陈康敏,戴起勋,程晓农(2004). 高氮奥氏体钢的Cr2N晶间析出研究. 《金属热处理》.
  526. 张美芬,杨娟,严学华,程晓农(2004). ZrW2O8的合成及高温转变过程. 《功能材料》.
  527. 严学华,程晓农,张美芬(2004). 不同处理条件对前驱体转变成ZrW2O8的影响. 《硅酸盐学报》.
  528. 郑成琪,程晓农(2004). 应力振幅对CuAlMn记忆合金阻尼特性的影响. 《特种铸造及有色合金》.DOI
  529. Xiaonong Cheng (2004). Study on Cr_2N-Phase Precipitation Along Intercrystalline of High Nitrogen Austenitic Steels. Heat treatment of metals.
  530. Xiaonong Cheng (2004). High-damping capacity of CuAlMn shape memory alloys. The Chinese Journal of Nonferrous Metals.
  531. Xiaonong Cheng (2004). Effect of Microstructure on the Damping Capacity of Cu-Al-Mn Shape Memory Alloys.
  532. Xiaonong Cheng (2004). Present Status and Future of Damping Measurement for Metals. Journal of Experimental Mechanics.
  533. 王晓东,郑成琪,司乃潮,程晓农(2003). 合金元素对CuAl系阻尼合金组织的影响. 《铸造》.
  534. 郑丽娟,赵玉涛,程晓农,陈志刚(2003). 仿生叠层复合材料的制备及层间性能研究. 《机械工程材料》.
  535. 严学华,程晓农,丁华,肖爱民(2003). 基于有限元法的锌合金涡轮铸件的温度场模拟. 《中国铸造装备与技术》.
  536. 程晓农,戴起勋,王安东(2003). 奥氏体钢层错能与ε马氏体相变. 《钢铁研究学报》.
  537. 曹芬,程晓农(2003). H08Mn2E钢的等温转变曲线和连续冷却转变曲线. 《金属热处理》.
  538. 雷玉成,郑惠锦,程晓农(2003). 铝合金等离子弧立焊穿孔熔池的计算机模拟. 《焊接学报》.
  539. 郑丽娟,赵玉涛,金明江,程晓农,刘强(2003). 纤维/树脂/铝合金叠层复合材料的显微组织与阻尼性能. 《中国有色金属学报》.
  540. 曹芬,程晓农,邢一明(2003). 低合金高强度结构钢埋弧焊丝盘条的研制. 《江苏大学学报(自然科学版)》.
  541. 雷玉成,张成,程晓农,陈希章(2003). 基于遗传算法的模糊神经网络控制器在GTAW中的应用. 《焊接学报》.
  542. 戴起勋,程晓农,王安东(2002). 低温奥氏体钢相变的结构参数. 《钢铁研究学报》.
  543. 戴起勋,王安东,程晓农(2002). 低温奥氏体钢的层错能. 《钢铁研究学报》.
  544. 戴起勋,王安东,程晓农(2002). 低温奥氏体钢的强度计算. 《钢铁研究学报》.
  545. 雷玉成,程晓农,戴启勋,邢一明(2002). 并行工程在焊接材料开发中的应用. 《焊接学报》.
  546. 雷玉成,刘伟,程晓农(2002). 铝合金穿孔型等离子弧立焊的BP神经网络预测模型. 《焊接学报》.
  547. 赵玉涛,李忠华,戴起勋,程晓农(2002). Al-K2ZrF6反应体系生成Al3Zrp/Al复合材料的界面结构. 《中国有色金属学报》.
  548. 罗新民,程晓农,黄卫平,江峰(2002). 木材旋切刀专用钢5Cr8Mo2WSiV及其强韧化研究. 《金属热处理》.
  549. 黄卫平,程晓农,贾薇(2002). 人造板机械用新型刀片材料的开发. 《金属热处理》.
  550. 李丹,程晓农(2002). 形状记忆合金的功能动力学特性. 《江苏大学学报(自然科学版)》.
  551. 韩启成,程晓农,赵玉涛(2001). 仿生叠层复合材料的研究现状与发展. 《江苏大学学报(自然科学版)》.
  552. 程晓农,邵红红(2000). 铝合金表面化学复合镀研究. 《江苏大学学报(自然科学版)》.
  553. 吴铭方,于治水,蒋成禹,祁凯,程晓农(2000). 反应层厚度对Al2O3/AgCuTi/Ti-6Al-4V接头强度的影响. 《稀有金属材料与工程》.
  554. 孙永庆,程晓农,张伯承(2000). 高铬白口铸铁气门座圈热处理工艺改进研究. 《江苏大学学报(自然科学版)》.
  555. 程晓农(1999). 我国材料科学中高技术发展现状与趋势. 《金属热处理》.
  556. 江峰,罗新民,程晓农(1998). YK 钢热处理工艺对硬度的影响. 《江苏大学学报(自然科学版)》.
  557. 程晓农(1998). 强化流态床淬火能力的研究. 《金属热处理》.
  558. 邢一明,程晓农,赵玉涛(1997). 金属基复合材料中增强材料的表面处理. 《江苏大学学报(自然科学版)》.
  559. 柳秉毅,程晓农(1992). 韧性金属材料冲蚀磨损机理的研究. 《江苏大学学报(自然科学版)》.
  560. 吴光英,周汝霖,程晓农(1988). 精确热处理设备的初探——滴控炉与流态床炉联合装置的设计和试验. 《工业加热》.

预印本

  1. Hengnan Ding, Tianwei Yin, Rui Luo, Shi Feng, Yucheng Liu, Jiayu Chen, Qingbin Liu, JianHe Lai, Weidong Jia, Xiaonong Cheng (2026). Microstructure evolution and tempering softening mechanism of modified high hardenability die-casting steel. SSRN Electronic Journal.DOI
  2. Hengnan Ding, Rui Luo, Tian Liu, Yang Yu, Fuyang Cao, Jun Liao, Yongzong Lu, Weidong Jia, Xiaonong Cheng (2025). Evolution Mechanisms of Microstructure and Mechanical Properties in Spray-formed H13 during Isothermal Quenching near Ms and Subsequent Tempering. SSRN Electronic Journal.DOI
  3. Leli Chen, Tianwei Yin, Pei Gao, Yu Cao, Zhou Zhou, Donghua Sheng, Lingxiao Ouyang, Tian Liu, Hengnan Ding, Rui Luo, Xiaonong Cheng (2023). Clarifying the Hot Shear-Compression Deformation Behavior of a Ni-Mo Superalloy: Flow Characteristic and Microstructure Evolution. SSRN Electronic Journal.DOI
  4. Tian Liu, Xiaonong Cheng, Hengnan Ding, Leli Chen, Qian Wang, Shu-gang Cui, Haotian Sun, Mengke Niu, Peng Yu Bi, Yu Juan Cao, Wenjun Lu, Rui Luo (2023). Unveiling Generation Mechanism of Grain Boundary Serration and its Impact on Mechanical Behavior in a Nickel-Based Superalloy. SSRN Electronic Journal.DOI
  5. Tianwei Yin, Leli Chen, Pei Gao, Feng Wang, Rui Luo, Xiaonong Cheng (2023). Explorative Study on the Deformation Behavior of Inconel 617b Superalloy at 1200 ℃ with the Drastic Strain Rate. SSRN Electronic Journal.DOI
  6. Yu-tong Yutong, Jie Zheng, Shirao Huang, Yang Li, Xiaonong Cheng, Wei-jian Han (2023). The Role of Strain Rate in Microstructure Evolution, Deformation Heterogeneity and Cracking Mode of High-Pressure Die-Casting Al7si0.2mg Alloy. SSRN Electronic Journal.DOI
  7. Leli Chen, Rui Luo, Xiuli Hou, Yonghuan Yang, Jiayi Sun, Tian Liu, Hengnan Ding, Yuanxiang Zhang, Yu Cao, Pei Gao, Xiaonong Cheng (2022). Investigation of Shear-Compression Rheological Characteristics and Thermoforming Properties of Gh4169 Superalloy. SSRN Electronic Journal.DOI

此主页由公开资料整理,尚未经学者本人认领。