刘君武｜合肥工业大学｜学者主页

2025

Grain boundary diffusion of dysprosium using DyF3 dip-coating method to enhance the magnetic properties of sintered Nd-Fe-B magnet

Zechuan Wang, Zhenyu Li, Jian Li, Jikun Deng, Meng Li, Guoqing Tong, Honghai Zhong, Junwu Liu, Yang Jiang

Journal of Materials Science

DOI

2025

Crystalline Si coating on diamond particles by silane CVD and the improving thermal conductivity of diamond-Si/Al composites

Jikun Deng, Jian Li, Zhenyu Li, Zechuan Wang, Guoqing Tong, Junwu Liu, Honghai Zhong, Yang Jiang

Diamond and Related Materials

DOI

2024

注射成形低钨-钨连接度的90W-6Ni-4Mn的高比重合金及其组织与性能研究

伍威，邓汲坤，任伯勇，刘君武，仲洪海，蒋阳

《粉末冶金工业》

2024

Electrochemical deposition of super-conductive Cu/MXene laminated composite foils with low thermal expansion coefficient

Chenyu Gao, Jikun Deng, Jiaxing He, Zechuan Wang, Yuanyuan Sheng, Junwu Liu, Honghai Zhong, Guoqing Tong, Yang Jiang

Journal of materials research/Pratt's guide to venture capital sources

DOI

2023

Enhanced mechanical and current-carrying wear performances of copper/carbon-matrix composites via interfacial reaction of chromium

Boyong Ren, Chenyu Gao, Wei Wu, Jiaxing He, Junwu Liu, Honghai Zhong, Yang Jiang

Journal of Materials Science

DOI

2023

Current-Carrying Wear Behavior of Bi-Containing Graphite/Copper-Matrix Composites via Hot Powder Forging

Wei Wu, Jiaxing He, Boyong Ren, Chenyu Gao, Junwu Liu, Honghai Zhong, Yang Jiang

Journal of Materials Engineering and Performance

DOI

2022

Characterization of Cr Coating Obtained on Micrometer-Scale Diamond Particles Prepared by Molten Salt Method

Qingzhu Ge, Meng Yan, Yang Jiang, Yonghong Wang, Junwu Liu

Journal of Superhard Materials

DOI

2022

Copper fiber reinforced needle-coke/carbon composite for pantograph slide and its current-carrying wear performance

Meng Li, Boyong Ren, Wei Wu, Ke Rong Jiang, Jiamin Zhang, Enze Xu, Junwu Liu, Honghai Zhong, Guoqing Tong, Yang Jiang

Materials Research Express

DOI

2022

Effect of diamond particle type on the thermal properties of diamond/copper composites

Qingzhu Ge, Yan Meng, Yang Jiang, Yonghong Wang, Junwu Liu

Kovove Materialy-Metallic Materials

DOI

2021

梯度SiCP/Al复合材料的组织与性能

晏萌，刘君武，江道传

《理化检验-物理分册》

2021

Full density graphite/copper-alloy matrix composite fabricated via hot powder forging for pantograph slide

Man Wang, Meng Li, Ke Rong Jiang, Enze Xu, Junwu Liu, Honghai Zhong, Yang Jiang

Materials Research Express

DOI

2020

Effect of flake graphite content on wear between behavior between P/M copper-based pantograph slide and contact wire

Jianxiang Huang, Man Wang, Yaochuan Li, Enze Xu, Ke Rong Jiang, Meng Li, Honghai Zhong, Junwu Liu, Yang Jiang

Materials Research Express

DOI

2020

Microstructure and Current Carrying Wear Behaviors of Copper/Sintered–Carbon Composites for Pantograph Sliders

Yaochuan Li, Jianxiang Huang, Man Wang, Junwu Liu, Chengyong Wang, Honghai Zhong, Yang Jiang

Metals and Materials International

DOI

2018

Graphite cluster/copper-based powder metallurgy composite for pantograph slider with well-behaved mechanical and wear performance

Enze Xu, Jianxiang Huang, Yaochuan Li, Zhifeng Zhu, Min Cheng, Danting Li, Honghai Zhong, Junwu Liu, Yang Jiang

Powder Technology

DOI

2018

Microstructure and properties of Al-60wt.%Si composites prepared by powder semi-solid squeeze

Junwu Liu, Daochuan Jiang, Xingxing Zhou, Yonghong Wang, Xuemin Liu, Hongxing Xin, Yang Jiang, Lei Yang, Yujun Zhang, Zhigang Huang, Dong Feng

Powder Technology

DOI

2018

Tungsten-coated diamond powders prepared by microwave-heating salt-bath plating

Chenlong Wei, Jigui Cheng, Jian‐Feng Li, Wenchao Chen, Pengqi Chen, Laima Luo, Junwu Liu

Powder Technology

DOI

2017

Effects of partial substitution of copper for cobalt on the microstructure and properties of ultrafine-grained WC-Co cemented carbides

Jianfeng Li, Jigui Cheng, Pengqi Chen, Wenchao Chen, Bangzheng Wei, Junwu Liu

Journal of Alloys and Compounds

DOI

2017

High-Si reinforced Al matrix composites prepared by powder semi-solid squeeze

Junwu Liu, Xingxing Zhou, Hongxing Xin

Journal of Alloys and Compounds

DOI

2017

Mechanical and wear performances of aluminum/sintered-carbon composites produced by pressure infiltration for pantograph sliders

Shuai Ma, Enze Xu, Zhifeng Zhu, Qian Liu, Shimeng Yu, Junwu Liu, Honghai Zhong, Yang Jiang

Powder Technology

DOI

2017

Fabrication, microstructures and properties of 50 vol.-% SiCp/6061Al composites via a pressureless sintering technique

Xuezhi Mao, Yu Hong, Binhao Wang, Junwu Liu, Yujun Zhang, Dong Feng, Lei Yang, Changdong Shi, Yucheng Wu, Wenming Tang

Powder Metallurgy

DOI

2016

CaMoO4∶Eu3+,M+（M=Li,Na,K）粉体的制备与发光性能研究

符启慧，刘君武

《粉末冶金工业》

2016

Eu3+掺杂CaMoO4粉体的制备及发光性能

符启慧，刘君武

《中国陶瓷》

2014

无压浸渗制备SiCp/Al复合材料的力学性能研究

吴米贵，刘君武，蒋会宾

《粉末冶金工业》

2014

铝合金中硅含量对无压浸渗Si3N4/Al复合材料性能的影响

吴米贵，刘君武，蒋会宾，贺港，尹辉

《理化检验-物理分册》

2013

无压浸渗制备SiC/Al电子封装材料的结构与性能

蒋会宾，刘君武，吴米贵，肖鹏

《理化检验-物理分册》

2012

素坯制备工艺对反应烧结碳化硅结构与性能的影响

蒋会宾，束成祥，刘君武，吴米贵，汤文明

《粉末冶金工业》

2012

反应烧结微米级SiC陶瓷材料的结构与力学性能

束成祥，蒋会宾，李晓阳，刘君武，汤文明

《理化检验-物理分册》

2012

硅溶胶粘结SiC预制件的烧结特性研究

黄思德，刘君武，李青鑫，蒋会宾，丁锋，郑治祥

《粉末冶金工业》

2011

煅烧温度对高体积分数SiCp/Al复合材料性能的影响

刘君武，李青鑫，丁锋，黄思德，郑治祥

《中国有色金属学报》

2011

无压渗透法制备Al/AlN复合材料及其性能

俞雨，程继贵，万磊，梁槟星，刘君武

《复合材料学报》

2011

粒度组成对高体积分数SiCp/Al复合材料性能的影响

刘君武，李青鑫，吴金方，丁锋，郑治祥

《材料热处理学报》

DOI

2011

AlSiC电子封装材料的凝胶注模法制备

吴金方，刘君武，丁锋，李青鑫，郑治祥

《合肥工业大学学报(自然科学版)》

2011

Effect of calcination temperature on properties of high volume fraction SiCp/Al composites

Junwu Liu, Qingxin Li, Feng Ding, Huang Si-de, Zheng Zhi-xiang

The Chinese Journal of Nonferrous Metals

2009

酸性电解液对Ti-6Al-4V合金微弧氧化的影响

王建民，郑治祥，汪景奇，刘君武，吴玉程，徐光青，吕珺，汤文明

《材料热处理学报》

DOI

2008

溶胶-凝胶制备SnO2/TiO2复合材料及其性能研究

汪冬梅，吴玉程，吕珺，徐光青，刘君武，汤文明，郑治祥

《功能材料》

2008

阳极氧化-电化学沉积-水热合成法制备Ti/TiO2/HA

王建民，郑治祥，汪景奇，刘君武，徐光青，吕珺，汤文明

《金属功能材料》

2008

Structural evolution of Si-50%C powder during mechanical alloying and heat treatment

Wenming Tang, Zhixiang Zheng, Yucheng Wu, Guangqing Xu, Jun Biao Lu, Junwu Liu, Jian-min WANG

Transactions of Nonferrous Metals Society of China

DOI

2008

高增强体含量的SiC/Al复合材料无压渗透法制备及性能研究

刘君武

《合肥工业大学》

2007

近净成形制备SiCp/Al复合材料Ⅱ:SiC预成形坯自发熔渗Z101

刘君武，郑治祥，吴玉程，王建民，汤文明，吕君，徐光青

《中国有色金属学报》

2007

高SiC含量的Al基复合材料的制备II:SiC预成形坯无压渗透纯Al

刘君武，郑治祥，吴玉程，王建民，汤文明，吕君，徐光青

《金属功能材料》

2007

高SiC含量的Al基复合材料的制备I:SiC预成形坯的制备

刘君武，郑治祥，王建民，吴玉程，汤文明，吕君，徐光青

《金属功能材料》

2007

电泳沉积制备Ca10（PO4）6（OH）2/TiO2/Ti复合涂层

王建民，刘君武，郑治祥，邢晓洁，汤文明，吕珺

《特种铸造及有色合金》

2007

近净成形制备SiC/Al复合材料Ⅰ:SiC预成形坯的制备

刘君武，郑治祥，吴玉程，王建民，汤文明，吕君，徐光青

《中国有色金属学报》

2007

Pressureless infiltration of liquid aluminum alloy into SiC preforms to form near-net-shape SiC/Al composites

Junwu Liu, Zhixiang Zheng, Jianmin Wang, Yucheng Wu, Wenming Tang, Jun Lü

Journal of Alloys and Compounds

DOI

2006

Synthesis of TiB2 nanocrystalline powder by mechanical alloying

Wenming Tang, Zhixiang Zheng, Yucheng Wu, Jianmin Wang, Jun Biao Lu, Junwu Liu

Transactions of Nonferrous Metals Society of China

DOI

2005

粉体化学镀的研究及应用进展

刘君武，吕珺，王建民，郑治祥，汤文明

《金属功能材料》

2003

纳米(Ti,Ni,Fe)-Al金属间化合物及其复合材料研究进展

汤文明，唐红军，郑治祥，丁厚福，吕君，刘君武

《金属功能材料》

2003

Fe-Al金属间化合物基复合材料的研究进展

汤文明，唐红军，郑治祥，丁厚福，吕珺，刘君武

《中国有色金属学报》

2003

Progresses in Studies on(Ti,Ni,Fe)-Al Nanocrystalline Intermetallics and Composites

Junwu Liu

Metallic Functional Materials

2001

Fe/SiC金属基复合材料的研究

刘君武，郑治祥，丁厚福，汤文明，邹正军

《兵器材料科学与工程》

2000

SiC颗粒表面改性对SiCp/Fe烧结及性能的影响

石磊，刘君武，王支相，汪翔，郑治祥

《合肥工业大学学报(自然科学版)》

精选作品

期刊论文

Grain boundary diffusion of dysprosium using DyF3 dip-coating method to enhance the magnetic properties of sintered Nd-Fe-B magnet

Crystalline Si coating on diamond particles by silane CVD and the improving thermal conductivity of diamond-Si/Al composites

注射成形低钨-钨连接度的90W-6Ni-4Mn的高比重合金及其组织与性能研究

Electrochemical deposition of super-conductive Cu/MXene laminated composite foils with low thermal expansion coefficient

Enhanced mechanical and current-carrying wear performances of copper/carbon-matrix composites via interfacial reaction of chromium

Current-Carrying Wear Behavior of Bi-Containing Graphite/Copper-Matrix Composites via Hot Powder Forging

Characterization of Cr Coating Obtained on Micrometer-Scale Diamond Particles Prepared by Molten Salt Method

Copper fiber reinforced needle-coke/carbon composite for pantograph slide and its current-carrying wear performance

Effect of diamond particle type on the thermal properties of diamond/copper composites

梯度SiCP/Al复合材料的组织与性能

Full density graphite/copper-alloy matrix composite fabricated via hot powder forging for pantograph slide

Effect of flake graphite content on wear between behavior between P/M copper-based pantograph slide and contact wire

Microstructure and Current Carrying Wear Behaviors of Copper/Sintered–Carbon Composites for Pantograph Sliders

Graphite cluster/copper-based powder metallurgy composite for pantograph slider with well-behaved mechanical and wear performance

Microstructure and properties of Al-60wt.%Si composites prepared by powder semi-solid squeeze

Tungsten-coated diamond powders prepared by microwave-heating salt-bath plating

Effects of partial substitution of copper for cobalt on the microstructure and properties of ultrafine-grained WC-Co cemented carbides

High-Si reinforced Al matrix composites prepared by powder semi-solid squeeze

Mechanical and wear performances of aluminum/sintered-carbon composites produced by pressure infiltration for pantograph sliders

Fabrication, microstructures and properties of 50 vol.-% SiCp/6061Al composites via a pressureless sintering technique

CaMoO4∶Eu3+,M+（M=Li,Na,K）粉体的制备与发光性能研究

Eu3+掺杂CaMoO4粉体的制备及发光性能

无压浸渗制备SiCp/Al复合材料的力学性能研究

铝合金中硅含量对无压浸渗Si3N4/Al复合材料性能的影响

无压浸渗制备SiC/Al电子封装材料的结构与性能

素坯制备工艺对反应烧结碳化硅结构与性能的影响

反应烧结微米级SiC陶瓷材料的结构与力学性能

硅溶胶粘结SiC预制件的烧结特性研究

煅烧温度对高体积分数SiCp/Al复合材料性能的影响

无压渗透法制备Al/AlN复合材料及其性能

粒度组成对高体积分数SiCp/Al复合材料性能的影响

AlSiC电子封装材料的凝胶注模法制备

Effect of calcination temperature on properties of high volume fraction SiCp/Al composites

酸性电解液对Ti-6Al-4V合金微弧氧化的影响

溶胶-凝胶制备SnO2/TiO2复合材料及其性能研究

阳极氧化-电化学沉积-水热合成法制备Ti/TiO2/HA

Structural evolution of Si-50%C powder during mechanical alloying and heat treatment

高增强体含量的SiC/Al复合材料无压渗透法制备及性能研究

近净成形制备SiCp/Al复合材料Ⅱ:SiC预成形坯自发熔渗Z101

高SiC含量的Al基复合材料的制备II:SiC预成形坯无压渗透纯Al

高SiC含量的Al基复合材料的制备I:SiC预成形坯的制备

电泳沉积制备Ca10（PO4）6（OH）2/TiO2/Ti复合涂层

近净成形制备SiC/Al复合材料Ⅰ:SiC预成形坯的制备

Pressureless infiltration of liquid aluminum alloy into SiC preforms to form near-net-shape SiC/Al composites

Synthesis of TiB2 nanocrystalline powder by mechanical alloying

粉体化学镀的研究及应用进展

纳米(Ti,Ni,Fe)-Al金属间化合物及其复合材料研究进展

Fe-Al金属间化合物基复合材料的研究进展

Progresses in Studies on(Ti,Ni,Fe)-Al Nanocrystalline Intermetallics and Composites

Fe/SiC金属基复合材料的研究

SiC颗粒表面改性对SiCp/Fe烧结及性能的影响

研究方向