郭彦林

期刊论文

1. Xiangtao Zhao, Yanlin Guo, Ke Wang, J. Duan, Wen-Ke Zheng (2026). Compression and shear stability capacity design for a composite wall combining concrete-filled steel tubes and corrugated steel plates. Engineering structures.DOI
2. Yan-Guo Hou, Yanlin Guo, Chen Wen, Xiao-Jin Zhu, Qi-Dong Zhang (2026). Interactive strength design of transformed triangular corrugated plates with top stringers under combined bending and shear. Structures.DOI
3. Haojun Sun, Wei Zhang, Chen Xian, Hai-Tao Luan, Qingping Song, Yanlin Guo (2026). Load-bearing capacity prediction of built-up radially battened composite columns under axial compression. Structures.DOI
4. Bo-Li Zhu, Wen-Cong Liu, Hong-Wei Shan, Xiao-dong Wang, Yanlin Guo (2026). Equivalent elastic-plastic model of horizontally CSPSW used in structural design. Journal of constructional steel research.DOI
5. Chen Wen, Jiabao Zuo, Yanlin Guo, Xiong He, Haojun Sun, J. Duan (2025). Experimental and numerical study on seismic behaviors of corrugated plate shear walls. Journal of constructional steel research.DOI
6. Bo-Li Zhu, J. Duan, Hai-Tao Luan, Guo Yu, Yanlin Guo (2025). Elastic equivalent multi-bar models for corrugated steel plate shear walls in structural analysis. Structures.DOI
7. Bo-Li Zhu, Wen-Cong Liu, Jun Hou, Yanlin Guo (2025). Simplified shear-resistant computational model of vertically corrugated steel plate shear wall embedded in frame structure. Structures.DOI
8. Yanguo Hou, Chenbao Wen, Kuisheng Liu, J. Duan, Haojun Sun, Yanlin Guo (2025). Local and global buckling prevention design of transformed triangular corrugated plates under shear and bending. Thin-walled structures.DOI
9. Haojun Sun, Yan-Guo Hou, Yanlin Guo, Zhi-Yuan Hu, Kai Duan (2025). Strength design of the steel Y-shaped column with a tensile rod under vertical loads. Journal of constructional steel research.DOI
10. Haojun Sun, Yan-Guo Hou, Yanlin Guo, Cheng-Wu Wang, Xiao-dong Wang, Hong-Wei Shan (2025). Strength design of the built-up radially battened composite column under combined axial compression and any directional bending moment. Structures.DOI
11. Yan-Guo Hou, Yanlin Guo, Hong-Wei Shan, Xiao-dong Wang (2025). General strength design for transformed triangular corrugated steel plates with varying-shaped top stringers. Structures.DOI
12. Bo-Li Zhu, Chen Wen, Yanlin Guo (2024). Load-bearing capacity prediction of the orthogonal double corrugated SPSW under combined compression and shear load. Structures.DOI
13. Chen Wen, Jiabao Zuo, Bo-Li Zhu, Haojun Sun, Yanlin Guo, Wen-Jin Zheng, Li-Lan Deng (2024). Shear resistance design of prefabricated corrugated steel plate shear walls with reinforced boundary elements. Structures.DOI
14. Bo-Li Zhu, Yanlin Guo, Hao Liao (2024). Stability capacity design of shuttle-shaped restrained-buckling braces with uniform cross-section at mid-span. Journal of constructional steel research.DOI
15. Haojun Sun, Yanlin Guo (2024). Strength design of built-up radially battened columns subject to axial compression and arbitrary directional bending moment. Engineering structures.DOI
16. Chen Wen, Bo-Li Zhu, Haojun Sun, Yanlin Guo, Wen-Jin Zheng, Li-Lan Deng (2024). Global stability design of double corrugated steel plate shear walls under combined shear and compression loads. Thin-walled structures.DOI
17. Yanguo Hou, Chen Wen, Yanlin Guo, Haojun Sun (2024). Bending-bearing capacity design of transformed triangular corrugated plates with top stringers. Thin-walled structures.DOI
18. Chen Wen, Bo-Li Zhu, Yan-Guo Hou, Yanlin Guo (2024). Shear-bearing capacity prediction of concrete-infilled double steel corrugated-plate shear walls. Structures.DOI
19. Wang Liu, Xiong Wang, Yanlin Guo, Zi-Hao Tian, Jing-Yuan Li, Wen-Hua Bai (2024). Experimental and numerical study of L-shaped irregularly concrete-filled steel tube columns under axial compression and eccentric compression. Journal of Building Engineering.DOI
20. Wang Liu, Wen-Hua Bai, Yanlin Guo, Xiong Wang (2024). Design method of irregular-shaped concrete-filled steel tube column joints with inner semi-diaphragm. Structures.DOI
21. Yanlin Guo, M. Lian, Qianqian Cheng (2024). Performance-based plastic design of high-strength steel framed-tube structures fused with replaceable shear links. Journal of constructional steel research.DOI
22. Wang Liu, Yanlin Guo, Zi-Hao Tian, Xiao Yang (2024). Sectional strength design of T-shaped irregularly concrete-filled steel tube columns under combined axial load and any directional moments. Structures.DOI
23. Yan-Guo Hou, Yanlin Guo, Chen Wen, Haojun Sun (2024). Shear-bearing capacity design of transformed triangular corrugated plates with top stringers. Journal of constructional steel research.DOI
24. Chen Wen, Haojun Sun, Ya-zhou Liu, Yan-Guo Hou, Jiabao Zuo, Yanlin Guo (2024). Cyclic tests and shear resistance design of stiffened corrugated steel plate shear walls. Engineering structures.DOI
25. Wang Liu, Yanlin Guo, Zi-Hao Tian, Ya-zhou Liu, Yan-Guo Hou, Jing-Yuan Li (2024). Sectional strength design of l-shaped irregularly concrete-filled steel tube column under axial compression and any directional moment. Structures.DOI
26. Wang Liu, Yanlin Guo (2024). Experimental and numerical study on the seismic performance of irregularly concrete-filled steel tube column to steel beam joints with inner semi-diaphragm. IABSE Reports.DOI
27. Xiang-Yu Zhao, Can Chen, Xiao Lin Yu, Qi-Da Song, Yan‐Lin Guo (2024). Stability capacity design of longitudinal asymmetrical shuttle-shaped columns subjected to compression-bending loads. Journal of Building Engineering.DOI
28. Pumsakheyna Chea, Yan‐Lin Guo, Xiao-Kun Han, Kai Liu, Xiaojin Zhu, Jianpeng Yang, Xiaoming Yang (2024). Overall stability design of L-shaped batten-connected multi-cell concrete-filled steel tube columns under axial compression. Journal of Building Engineering.DOI
29. Xiang-Yu Zhao, Yan‐Lin Guo, Chen-Bao Wen (2024). Axial compressive stability design of longitudinal asymmetrical shuttle-shaped columns. Journal of Building Engineering.DOI
30. 杨啸，郭彦林，闻陈宝，朱博莉（2023）. 波形钢板组合墙边缘构件-梁连接节点的滞回性能. 《工程力学》.
31. Haojun Sun, Chen Wen, Bo-Li Zhu, Yanlin Guo, J. Duan, Zhen-Guo Liu, Qiang Zhao (2023). Strength Prediction of Built-up Radially Battened Columns in Torsional Buckling. Thin-walled structures.DOI
32. Haojun Sun, Ya-zhou Liu, Yan-Guo Hou, Wen-Hua Bai, Guang-Hui Liu, Xiong Wang, Yanlin Guo (2023). Static strength design of local thickened plate joints between multi-cell concrete-filled steel tubular column and steel beam. Journal of Building Engineering.DOI
33. Haojun Sun, Chen Wen, Yan-Guo Hou, Yanlin Guo, Wen-Hua Bai (2023). Overall flexural-shear buckling strength design of built-up radially battened columns. Journal of Building Engineering.DOI
34. Chen-Bao Wen, Yanlin Guo, Jia-Qi Zuo, Hao-Jun Sun (2023). Global shear stability capacity of trapezoidally corrugated steel plate shear walls with boundary elements. Journal of Building Engineering.DOI
35. Bo‐Li Zhu, Wen-Hua Bai, Chen-Bao Wen, Jia-Qi Zuo, Hao-Jun Sun, Xiong Wang, Yan‐Lin Guo (2023). Experimental and numerical investigation into hysteretic performance of orthogonal double corrugated steel plate shear wall. Thin-Walled Structures.DOI
36. Pumsakheyna Chea, Yan‐Lin Guo, Dexin Zhang, Huifang Wang, Jinpeng Wu (2023). Buckling behaviors and load resistance design of steel cable-arches under in-plane loads. Journal of Constructional Steel Research.DOI
37. Yan‐Lin Guo, Chen-Bao Wen, Hao-Jun Sun (2023). Study and Application of Steel and Composite Walls with Corrugated Steel Plates in China. International Journal of Structural Stability and Dynamics.DOI
38. Wang-Hui Liu, Yan‐Lin Guo, Zi-Hao Tian, Jing Li (2023). Seismic performance of irregular-shaped concrete-filled steel tube column to H-shaped steel beam joints with inner semi-diaphragm: Experimental and numerical study. Journal of Building Engineering.DOI
39. Bo‐Li Zhu, Jing‐Zhong Tong, Jin‐Xun Zhang, Yan‐Lin Guo (2023). Shear-resistant capacity and design of orthogonal double-corrugated-plate shear walls. Thin-Walled Structures.DOI
40. Wang-Hui Liu, Yan‐Lin Guo, Zi-Hao Tian, Xiao Yang (2023). Overall stability capacity design of T-shaped irregularly concrete-filled steel tube columns considering axial compression and any directional moments. Journal of Building Engineering.DOI
41. En-Yuan Zhang, Jing‐Zhong Tong, Yan‐Lin Guo (2023). Seismic performance of triple-truss-latticed buckling-restrained braces: Tests and numerical simulations. Journal of Constructional Steel Research.DOI
42. Chen-Bao Wen, Yan‐Lin Guo, Hao-Jun Sun, Zi-Hao Tian, Xiong He (2023). Experimental and numerical study on seismic performance of concrete-infilled double steel corrugated-plate walls. Journal of Building Engineering.DOI
43. Hao-Jun Sun, Yan‐Lin Guo, Chen-Bao Wen, Jia-Qi Zuo (2023). Local and global buckling prevention design of corrugated steel plate shear walls. Journal of Building Engineering.DOI
44. 章友浩，朱博莉，郭彦林，李霆，王海山（2022）. 双曲面斜交网格筒相贯节点受力性能试验研究. 《建筑结构学报》.DOI
45. 刘文聪，朱博莉，王宏业，贾淑瑛，郭彦林（2022）. 某高层建筑混凝土核心筒-外框架竖向变形差值研究. 《施工技术(中英文)》.
46. Hao-Jun Sun, Yanlin Guo, Chen-Bao Wen, Jia-Qi Zuo, Qiang Zhao, Zhenguo Liu (2022). The strength design of deeply buried circular corrugated steel arches with considering only soil radial restraining. Thin-Walled Structures.DOI
47. Wang-Hui Liu, Yan‐Lin Guo, Zi-Hao Tian, Xiao Yang, Jing Li (2022). Experimental and numerical study of T-shaped irregularly concrete-filled steel tube columns under combined axial loads and moments. Journal of Building Engineering.DOI
48. Chen-Bao Wen, Yan‐Lin Guo, Jia-Qi Zuo, Xiangyu Zhao (2022). Strength design of prefabricated corrugated steel plate shear walls under combined compression and shear loads. Journal of Building Engineering.DOI
49. Jing‐Zhong Tong, Ruo-Min Wu, Zhaoyu Xu, Yan‐Lin Guo (2022). Subassemblage tests on seismic behavior of double-corrugated-plate shear walls. Engineering Structures.DOI
50. Bo‐Li Zhu, Yan‐Lin Guo, You‐Hao Zhang (2022). Global stability design of grid cylindrical-lattice shells under combined axial compression and bending moment. Journal of Constructional Steel Research.DOI
51. Jia-Qi Zuo, Bo‐Li Zhu, Yan‐Lin Guo, Chen-Bao Wen, Jing‐Zhong Tong (2022). Experimental and numerical study of Steel Corrugated-Plate Coupling Beam connecting shear walls. Journal of Building Engineering.DOI
52. Bo‐Li Zhu, Wen-Cong Liu, Yan‐Lin Guo, Jiaxin Wang (2022). In-plane stability behaviours and design of web-opened steel arch. Journal of Constructional Steel Research.DOI
53. Bo‐Li Zhu, Yan‐Lin Guo, You‐Hao Zhang (2022). Stability capacity design of grid cylindrical-lattice shells loaded axially. Journal of Constructional Steel Research.DOI
54. Jing‐Zhong Tong, En-Yuan Zhang, Yan‐Lin Guo, Chao-Qun Yu (2022). Cyclic experiments and global buckling design of steel-angle-assembled buckling-restrained braces. Bulletin of Earthquake Engineering.DOI
55. 王宇伟，郭彦林，刘王恢，朱靖申（2021）. 波形钢板组合墙对拉螺栓受力机理及设计方法. 《建筑结构》.DOI
56. 李竞远，郭彦林（2021）. 大型地上实验水池钢结构方案研究及计算. 《工业建筑》.
57. 王宇伟，郭彦林，王梦争（2021）. T形截面波形钢板-混凝土组合墙研究进展. 《工业建筑》.DOI
58. Xiao Yang, Yan‐Lin Guo, Jing Li, Wang-Hui Liu, Jun-Kai Gao, Meng-Zheng Wang (2021). Overall stability design of T-shaped irregular concrete-filled steel tubular columns under axial compression. Journal of Building Engineering.DOI
59. Bo‐Li Zhu, Yan‐Lin Guo, Chi Zhang (2021). Global buckling behaviours and design of uniform-section BRBs considering lateral load effects. Journal of Constructional Steel Research.DOI
60. 郭彦林，朱靖申（2020）. 剪力墙的型式、设计理论研究进展. 《工程力学》.
61. 朱博莉，郭彦林（2020）. 梭形空间桁架约束型防屈曲支撑的性能研究. 《工程力学》.
62. 张卫，李霆，许敏，敖晓钦，郭彦林，朱博莉，罗尧治（2020）. 中国动漫博物馆复杂铸钢节点分析与研究. 《建筑结构》.DOI
63. 王海山，谢伟烈，李竞远，郭彦林（2020）. 拱脚带水平约束弹簧的车辐拱平面内稳定性能. 《建筑科学与工程学报》.DOI
64. 白文化，高珺恺，杨振清，申新波，朱靖申，郭彦林（2020）. 钢屋盖结构滑移和落架一体化协同时变分析. 《施工技术(中英文)》.
65. 邹怡菲，高珺恺，黄永周，魏鹏，朱靖申，郭彦林（2020）. 钢屋盖结构液压顶推滑移时变模拟分析. 《施工技术(中英文)》.
66. 王海山，张可，章友浩，朱靖申，朱博莉，郭彦林（2020）. 大尺度斜交网格筒环向多点加载试验研究. 《工业建筑》.DOI
67. Meng-Zheng Wang, Yan‐Lin Guo, Xiao Zhan Yang, Jing-Shen Zhu (2020). Interaction equations of composite walls with T-section under axial compression and biaxial bending. Engineering Structures.DOI
68. Meng-Zheng Wang, Yan‐Lin Guo, Xiao Yang, Jing-Shen Zhu (2020). Compressive buckling behaviour of steel corrugated-plates in contact with a rigid medium. Composite Structures.DOI
69. Yuqi Zhou, Jing-Shen Zhu, Yan‐Lin Guo, Meng-Zheng Wang, Xiao Yang, Yao-Hui Ren (2020). Numerical and experimental studies on sectional load capacity of concrete-infilled double steel corrugated-plate walls under combined compression and in-plane bending. Thin-Walled Structures.DOI
70. Bo‐Li Zhu, You‐Hao Zhang, Yan‐Lin Guo, Wang-Hui Liu (2020). Elastic buckling behaviours of grid cylindrical-lattice shells under axial compression. Journal of Constructional Steel Research.DOI
71. Peng Zhou, Bo‐Li Zhu, Yan‐Lin Guo, Jingyuan Li (2020). Performance and design of double cross-arm cable-stayed buckling-restrained braces with fix-ended stays. Journal of Constructional Steel Research.DOI
72. Bo‐Li Zhu, Yan‐Lin Guo, Jun-Kai Gao, Yong‐Lin Pi (2020). Behaviour and design of spatial triple-truss-confined BRBs with a longitudinal shuttle shape. Engineering Structures.DOI
73. Jing-Shen Zhu, Yan‐Lin Guo, Meng-Zheng Wang, Xiao Zhan Yang, Yong‐Lin Pi (2020). Seismic performance of concrete-infilled double steel corrugated-plate walls: Experimental research. Engineering Structures.DOI
74. Meng-Zheng Wang, Yan‐Lin Guo, Peng Zhou (2020). Load-carrying mechanism of truss-confined buckling-restrained braces: Numerical and theoretical analyses. Engineering Structures.DOI
75. Wenhao Pan, Jing‐Zhong Tong, Yan‐Lin Guo, C.M. Wang (2020). Optimal design of steel buckling-restrained braces considering stiffness and strength requirements. Engineering Structures.DOI
76. Meng-Zheng Wang, Yan‐Lin Guo, Jing-Shen Zhu, Xiao Zhan Yang (2020). Flexural-torsional buckling and design recommendations of axially loaded concrete-infilled double steel corrugated-plate walls with T-section. Engineering Structures.DOI
77. Bo‐Li Zhu, Yan‐Lin Guo, Peng Zhou, Yong‐Lin Pi (2020). Load-carrying performance and design of BRBs confined with longitudinal shuttle-shaped-trusses. Journal of Constructional Steel Research.DOI
78. Bo‐Li Zhu, Peng Zhou, Yan‐Lin Guo, Jing-Shen Zhu, Yong‐Lin Pi (2020). Load resistance and hysteretic response of shuttle-shaped truss-confined BRBs. Engineering Structures.DOI
79. Meng-Zheng Wang, Yan‐Lin Guo, Jing-Shen Zhu, Xiao Zhan Yang (2020). Flexural buckling of axially loaded concrete-infilled double steel corrugated-plate walls with T-section. Journal of Constructional Steel Research.DOI
80. Jing‐Zhong Tong, Yan‐Lin Guo, Wenhao Pan, M.H. Shen, Peng Zhou (2019). Global buckling prevention of reduced-core-length buckling-restrained braces: theoretical and numerical investigations. Bulletin of Earthquake Engineering.DOI
81. Jing‐Zhong Tong, Yan‐Lin Guo, Wenhao Pan (2019). Ultimate shear resistance and post-ultimate behavior of double-corrugated-plate shear walls. Journal of Constructional Steel Research.DOI
82. Jing‐Zhong Tong, Yan‐Lin Guo, Jia-Qi Zuo, Junkai Gao (2019). Experimental and numerical study on shear resistant behavior of double-corrugated-plate shear walls. Thin-Walled Structures.DOI
83. Yan‐Lin Guo, Peng Zhou, Peng-Peng Fu, Bo‐Li Zhu, Meng-Zheng Wang (2019). Experimental test and hysteretic behavior of single cross-arm PCS-BRBs. Journal of Constructional Steel Research.DOI
84. Meng-Zheng Wang, Yan‐Lin Guo, Jing-Shen Zhu, Xiao Yang, Jing‐Zhong Tong (2019). Sectional strength design of concrete-infilled double steel corrugated-plate walls with T-section. Journal of Constructional Steel Research.DOI
85. Jing-Shen Zhu, Yan‐Lin Guo, Meng-Zheng Wang, Xiao Yang, Bo‐Li Zhu (2019). Strength design of concrete-infilled double steel corrugated-plate walls under uniform compressions. Thin-Walled Structures.DOI
86. Jing‐Zhong Tong, Yan‐Lin Guo, Wenhao Pan, Peng Zhou, Meng-Zheng Wang (2019). Hysteretic performance of inverted-V patterned BRB systems considering vertical pre-compression effects. Bulletin of Earthquake Engineering.DOI
87. Peng Zhou, Yan‐Lin Guo, Mark Andrew Bradford, Yong‐Lin Pi, Jing‐Zhong Tong (2019). Load resistance and hysteretic response of multiple cross-arm pre-tensioned cable stayed buckling-restrained braces. Engineering Structures.DOI
88. 谢伟烈，王海山，郭彦林（2018）. 双索盘车辐拱平面内稳定性能研究与设计建议. 《第十七届空间结构学术会议论文集》.
89. 章友浩，郭彦林（2018）. 三层柱面网格筒在纯弯荷载作用下的稳定性研究. 《第十七届空间结构学术会议论文集》.
90. Peng Zhou, Yan‐Lin Guo (2018). Design of multiple cross-arm PCS-BRBs considering asymmetric imperfection and initial pre-tensioning force. Journal of Constructional Steel Research.DOI
91. Jing‐Zhong Tong, Yan‐Lin Guo, Jia-Qi Zuo (2018). Elastic buckling and load-resistant behaviors of double-corrugated-plate shear walls under pure in-plane shear loads. Thin-Walled Structures.DOI
92. Yan‐Lin Guo, Jing-Shen Zhu, Meng-Zheng Wang, Xiao Yang, Peng Zhou (2018). Overall instability performance of concrete-infilled double steel corrugated-plate wall. Thin-Walled Structures.DOI
93. Peng Zhou, Yan‐Lin Guo, Yong‐Lin Pi (2018). Numerical investigations of multiple cross-arm pre-tensioned cable stayed BRBs with pin-ended stays. Journal of Constructional Steel Research.DOI
94. Yan‐Lin Guo, You‐Hao Zhang, Bo‐Li Zhu, Peng Zhou, Yong‐Lin Pi (2018). Experimental and numerical studies of instability mechanism and load resistance of rhombic grid hyperboloid-latticed shells under vertical load. Engineering Structures.DOI
95. Jing‐Zhong Tong, Yan‐Lin Guo (2018). Numerical investigations on elastic buckling and hysteretic behavior of steel angles assembled buckling-restrained braces. Journal of Constructional Steel Research.DOI
96. Bo‐Li Zhu, Yan‐Lin Guo, Peng Zhou, You‐Hao Zhang (2018). Load resistance and hysteretic response of rhombic grid hyperboloid‐latticed shell subjected to combined vertical and horizontal loads. The Structural Design of Tall and Special Buildings.DOI
97. Yan‐Lin Guo, Jing‐Zhong Tong, Xiaoan Wang, Peng Zhou (2018). Subassemblage tests and design of steel channels assembled buckling-restrained braces. Bulletin of Earthquake Engineering.DOI
98. Jing‐Zhong Tong, Yan‐Lin Guo (2018). Shear resistance of stiffened steel corrugated shear walls. Thin-Walled Structures.DOI
99. 张旭乔，郭彦林（2017）. 采用定长索设计的索网玻璃幕墙结构索长误差控制理论. 《工程力学》.
100. 郭彦林，符鹏鹏，胡正平（2017）. 预应力索撑型防屈曲支撑在某工程中的应用研究. 《建筑结构》.
101. 张旭乔，肖绪文，田伟，郭彦林，林冰（2017）. 超高层建筑施工过程结构竖向变形的研究现状. 《施工技术(中英文)》.
102. Yan‐Lin Guo, Bo‐Li Zhu, Peng Zhou, You‐Hao Zhang, Yong‐Lin Pi (2017). Experimental and numerical investigation into the load resistance and hysteretic response of rhombic grid hyperboloid-latticed shells. Engineering Structures.DOI
103. Yan‐Lin Guo, Peng Zhou, Mark Andrew Bradford, Yong‐Lin Pi, Jing‐Zhong Tong, Peng-Peng Fu (2017). Theoretical and numerical studies of elastic buckling and load resistance of double cross-arm pre-tensioned cable stayed buckling-restrained braces. Engineering Structures.DOI
104. Jing‐Zhong Tong, Yan‐Lin Guo (2017). Global buckling prevention of end collared buckling-restrained braces: Theoretical, numerical analyses and design recommendations. Engineering Structures.DOI
105. Yan‐Lin Guo, Hang Chen, Yong‐Lin Pi (2017). In-plane failure mechanisms and strength design of circular steel planar tubular Vierendeel truss arches. Engineering Structures.DOI
106. Bo‐Li Zhu, Yan‐Lin Guo (2017). 11.27: Elastic buckling load and load resistance of core‐separated assembled BRB confined by two concrete‐infilled tubes. ce/papers.DOI
107. Yan‐Lin Guo, Peng Zhou, Meng-Zheng Wang, Yong‐Lin Pi, Mark Andrew Bradford, Jing‐Zhong Tong (2017). Experimental and numerical studies of hysteretic response of triple-truss-confined buckling-restrained braces. Engineering Structures.DOI
108. Yan‐Lin Guo, Jing-Shen Zhu, Peng Zhou, Bo‐Li Zhu (2017). A new shuttle-shaped buckling-restrained brace. Theoretical study on buckling behavior and load resistance. Engineering Structures.DOI
109. Yan‐Lin Guo, Peng Zhou, Meng-Zheng Wang, Yong‐Lin Pi, Mark Andrew Bradford (2017). Numerical studies of cyclic behavior and design suggestions on triple-truss-confined buckling-restrained braces. Engineering Structures.DOI
110. Yan‐Lin Guo, Jing‐Zhong Tong, Bohao Zhang, Bo‐Li Zhu, Yong‐Lin Pi (2017). Theoretical and experimental investigation of core-separated buckling-restrained braces. Journal of Constructional Steel Research.DOI
111. Zi-Qin Jiang, C. Dou, Yan‐Lin Guo, A.L. Zhang (2017). End detailing experimental study of the pinned double-rectangular tube assembled buckling-restrained brace. Journal of Constructional Steel Research.DOI
112. Yan‐Lin Guo, Jing‐Zhong Tong, Xiao-An Wang, Bohao Zhang (2017). Subassemblage tests and numerical analyses of buckling-restrained braces under pre-compression. Engineering Structures.DOI
113. Yan‐Lin Guo, Xing Fei Yuan, Mark Andrew Bradford, Yong‐Lin Pi, Hang Chen (2017). Strength design of pin-ended circular steel arches with welded hollow section accounting for web local buckling. Thin-Walled Structures.DOI
114. Yan‐Lin Guo, Bo-Hao Zhang, Bo‐Li Zhu, Peng Zhou, You‐Hao Zhang, Jing‐Zhong Tong (2017). Theoretical and experimental studies of battened buckling-restrained braces. Engineering Structures.DOI
115. Zi-Qin Jiang, Yan‐Lin Guo, Ailin Zhang, Chao Dou, Caixia Zhang (2017). Experimental study of the pinned double rectangular tube assembled buckling-restrained brace. Journal of Zhejiang University. Science A.DOI
116. 郭彦林，郇志乾，朱邵辉，宫健，吕黄兵（2016）. 某超高层巨型转换桁架焊接残余应力数值模拟应用研究. 《施工技术(中英文)》.
117. 赵思远，王宏，郭彦林（2016）. 平面桁架拱平面外弹性稳定及设计方法研究. 《第五届建筑结构抗震技术国际会议》.
118. 郭彦林，朱博莉，章友浩，朱靖申，李霆，胡正平，王海山，徐敏（2016）. 双曲面菱形钢网格筒(Y4)结构承载力与抗震性能数值分析与试验研究. 《第十六届空间结构学术会议》.
119. 高占远，郭彦林（2016）. 大型或复杂钢结构焊接残余应力与变形研究进展. 《建筑科学与工程学报》.
120. 高占远，郭彦林（2016）. 焊接残余应力对Y型相贯节点极限承载力影响分析. 《建筑科学与工程学报》.
121. 赵思远，郭彦林，王宏（2016）. 闭合截面压弯钢拱的平面外稳定性能研究. 《工程力学》.
122. 张旭乔，郭彦林（2016）. 索网玻璃幕墙结构变形预调分析及施工安装顺序比较. 《施工技术(中英文)》.
123. 郭彦林，童精中，周鹏（2016）. 防屈曲支撑的型式、设计理论与应用研究进展. 《第25届全国结构工程学术会议》.
124. 郭彦林，张旭乔（2016）. 温度作用和索长误差对采用定长索设计的张拉结构的影响研究. 《第十六届空间结构学术会议》.
125. 郭彦林，章友浩，朱博莉，朱靖申，胡正平，李霆，王海山，徐敏（2016）. 中国动漫博物馆双曲面菱形网格筒(Y2)整体稳定性试验研究. 《第十六届空间结构学术会议》.
126. 章友浩，郭彦林，朱博莉，朱靖申，胡正平，李霆，王海山，徐敏（2016）. 中国动漫博物馆X型节点承载力试验研究. 《第十六届空间结构学术会议》.
127. 赵思远，郭彦林，王宏（2016）. 带支撑箱形钢拱的平面外弹性屈曲性能分析. 《清华大学学报(自然科学版)》.
128. Bo‐Li Zhu, Yan‐Lin Guo, Peng Zhou, Mark Andrew Bradford, Yong‐Lin Pi (2016). Numerical and experimental studies of corrugated-web-connected buckling-restrained braces. Engineering Structures.DOI
129. Zi-Qin Jiang, C. Dou, Yan‐Lin Guo, A.L. Zhang (2016). Theoretical study on design methods for pinned assembled BRB with flat core. Engineering Structures.DOI
130. Zi-Qin Jiang, Yan‐Lin Guo, Ailin Zhang, Chao Dou, Caixia Zhang (2016). Study on failure mechanism and end construction influences of double rectangular tube assembled buckling-restrained brace. Advances in Structural Engineering.DOI
131. Hang Chen, Yan‐Lin Guo, Mark Andrew Bradford, Yong‐Lin Pi, Xing Fei Yuan (2016). Strength and Design of Pin-Ended Circular Arches with Sinusoidal Corrugated Web under Combined In-Plane Loads. Journal of Structural Engineering.DOI
132. Yan‐Lin Guo, Xing Fei Yuan, Yong‐Lin Pi, Mark Andrew Bradford, Hang Chen (2016). In-Plane Failure and Strength of Pin-Ended Circular Steel Arches Considering Coupled Local and Global Buckling. Journal of Structural Engineering.DOI
133. Yan‐Lin Guo, Peng-Peng Fu, Peng Zhou, Jing‐Zhong Tong (2016). Elastic buckling and load resistance of a single cross-arm pre-tensioned cable stayed buckling-restrained brace. Engineering Structures.DOI
134. Chao Dou, Zi-Qin Jiang, Yong‐Lin Pi, Yan‐Lin Guo (2016). Elastic shear buckling of sinusoidally corrugated steel plate shear wall. Engineering Structures.DOI
135. Yong‐Lin Pi, Mark Andrew Bradford, Yan‐Lin Guo (2016). Revisiting Nonlinear In-Plane Elastic Buckling and Postbuckling Analysis of Shallow Circular Arches under a Central Concentrated Load. Journal of Engineering Mechanics.DOI
136. 姜子钦，郭彦林，张博浩，王小安（2015）. 双矩管装配式防屈曲支撑设计理论研究. 《工程力学》.
137. 郭彦林，姜子钦，王小安，黄彬（2015）. 双矩管装配式防屈曲支撑约束刚度取值研究. 《工程力学》.
138. 张博浩，郭彦林，朱博莉，黄彬（2015）. 缀板连接的内核分离式屈曲约束构件的承载力设计方法. 《建筑结构学报》.
139. 郭彦林，张博浩，朱博莉（2015）. 全钢型分离式防屈曲支撑的约束比取值研究. 《建筑结构学报》.
140. 郭彦林，张博浩，姜子钦，赵思远（2015）. 分离式防屈曲支撑及其弹性屈曲荷载的Ritz解. 《工程力学》.
141. Zi-Qin Jiang, Yanlin Guo, Hang Chen, Xuqiao Zhang (2015). Numerical analysis of initial imperfection influence on the performance of buckling-restrained brace. Tehnicki vjesnik - Technical Gazette.DOI
142. Yan‐Lin Guo, Hang Chen, Yong‐Lin Pi, Mark Andrew Bradford (2015). In-plane strength of steel arches with a sinusoidal corrugated web under a full-span uniform vertical load: Experimental and numerical investigations. Engineering Structures.DOI
143. Zi-Qin Jiang, Yan‐Lin Guo, Jing‐Zhong Tong, Xing Fei Yuan (2015). Design method of the pinned external integrated buckling-restrained braces with extended core. Part II: finite element numerical verification. Journal of Zhejiang University. Science A.DOI
144. Zi-Qin Jiang, Yan‐Lin Guo, Xiaoan Wang, Bin Huang (2015). Design method of the pinned external integrated buckling-restrained braces with extended core. Part I: theoretical derivation. Journal of Zhejiang University. Science A.DOI
145. Yan‐Lin Guo, Hang Chen, Yong‐Lin Pi, Chao Dou, Mark Andrew Bradford (2015). In-Plane Failure Mechanism and Strength of Pin-Ended Steel I-Section Circular Arches with Sinusoidal Corrugated Web. Journal of Structural Engineering.DOI
146. Jing‐Zhong Tong, Yan‐Lin Guo (2015). Elastic buckling behavior of steel trapezoidal corrugated shear walls with vertical stiffeners. Thin-Walled Structures.DOI
147. Yan‐Lin Guo, Siyuan Zhao, Yong‐Lin Pi, Mark Andrew Bradford, Chao Dou (2015). An experimental study on out-of-plane inelastic buckling strength of fixed steel arches. Engineering Structures.DOI
148. Chao Dou, Yan‐Lin Guo, Siyuan Zhao, Yong‐Lin Pi (2015). Experimental Investigation into Flexural-Torsional Ultimate Resistance of Steel Circular Arches. Journal of Structural Engineering.DOI
149. Yan‐Lin Guo, Si-Yuan Zhao, Mark Andrew Bradford, Yong‐Lin Pi (2015). Threshold Stiffness of Discrete Lateral Bracing for Out-of-Plane Buckling of Steel Arches. Journal of Structural Engineering.DOI
150. 王小安，郭彦林（2014）. 一种四角钢组合约束型防屈曲支撑外围连接的设计方法研究:数值分析. 《工程力学》.
151. 郭彦林，王小安（2014）. 一种四角钢组合约束型防屈曲支撑外围连接的设计方法研究:理论推导. 《工程力学》.
152. 郭彦林，赵思远，窦超（2014）. 面外支撑非均匀布置的箱型与圆管截面拱平面外弹性屈曲. 《工程力学》.
153. 郭彦林，陈航，袁星（2014）. 厚钢板对接焊接三维有限元数值模拟与分析. 《建筑科学与工程学报》.
154. 章友浩，郭彦林，朱博莉（2014）. 群柱失稳研究进展. 《建筑科学与工程学报》.
155. 赵思远，郭彦林，窦超（2014）. 倒三角截面空间桁架拱平面外弹塑性稳定设计方法研究. 《工程力学》.
156. 郭彦林，赵思远，张博浩（2014）. 某钢屋盖结构整体提升技术数值模拟方法及一体化有限元分析. 《施工技术(中英文)》.
157. Yan‐Lin Guo, Bohao Zhang, Zi-Qin Jiang, Hang Chen (2014). Critical load and application of core-separated buckling-restrained braces. Journal of Constructional Steel Research.DOI
158. Zi-Qin Jiang, Yan‐Lin Guo, Bohao Zhang, Xuqiao Zhang (2014). Influence of design parameters of buckling-restrained brace on its performance. Journal of Constructional Steel Research.DOI
159. Chao Dou, Yan‐Lin Guo, Yong‐Lin Pi, Siyuan Zhao (2014). Flexural-Torsional Buckling and Ultimate Resistance of Parabolic Steel Arches Subjected to Uniformly Distributed Vertical Load. Journal of Structural Engineering.DOI
160. Yan‐Lin Guo, Bohao Zhang, Siyuan Zhao, Chao Dou, Yong‐Lin Pi (2014). Ultimate Resistance Design of Shuttle-Shaped Steel Tubular Latticed Columns. Journal of Structural Engineering.DOI
161. Yan‐Lin Guo, Siyuan Zhao, Chao Dou, Yong‐Lin Pi (2014). Out-of-Plane Elastic Buckling of Circular Arches with Elastic End Restraints. Journal of Structural Engineering.DOI
162. Yan‐Lin Guo, Siyuan Zhao, Chao Dou (2014). Out-of-plane elastic buckling behavior of hinged planar truss arch with lateral bracings. Journal of Constructional Steel Research.DOI
163. 郭彦林，王昆，孙文波，田广宇，张博浩（2013）. 宝安体育场结构设计关键问题研究. 《建筑结构学报》.
164. 郭彦林，田广宇，王昆，张博浩（2013）. 一种基于静力位移测量值的车辐式屋盖结构索力识别方法. 《工程力学》.
165. 郭彦林，王小安（2013）. 一种四角钢组合约束型防屈曲支撑的外围约束比取值研究. 《工程力学》.
166. 田广宇，郭彦林，张博浩，王昆（2013）. 车辐式屋盖结构的一种索力识别方法的误差研究. 《工程力学》.
167. 郭彦林，张博浩，王小安，姜子钦（2013）. 装配式防屈曲支撑设计理论的研究进展. 《建筑科学与工程学报》.
168. 王小安，郭彦林，姜子钦（2013）. 两端铰接防屈曲支撑的受力性能及设计方法. 《建筑结构学报》.DOI
169. 童精中，郭彦林（2013）. 波浪腹板工形梁支承加劲肋设计方法研究. 《建筑科学与工程学报》.
170. 赵思远，郭彦林，张旭乔，张博浩（2013）. 张弦梁平面外弹性稳定性能研究. 《工程力学》.
171. 郭彦林，王昆，田广宇，张博浩（2013）. 车辐式张拉结构体型研究与设计. 《建筑结构学报》.
172. Xuqiao Zhang, Yan‐Lin Guo (2013). Behavior of steel plate shear walls with pre-compression from adjacent frame columns. Thin-Walled Structures.DOI
173. Chao Dou, Yan‐Lin Guo, Yong‐Lin Pi, Siyuan Zhao, Mark Andrew Bradford (2013). Effects of shape functions on flexural–torsional buckling of fixed circular arches. Engineering Structures.DOI
174. Bohao Zhang, Yan‐Lin Guo, Chao Dou (2013). Ultimate bearing capacity of asymmetrically double tapered steel columns with tubular cross-section. Journal of Constructional Steel Research.DOI
175. Yan‐Lin Guo, Si-Yuan Zhao, Chao Dou, Yong‐Lin Pi (2013). Out-of-plane strength design of spatially trussed arches with a rectangular lattice section. Journal of Constructional Steel Research.DOI
176. Chao Dou, Yan‐Lin Guo, Siyuan Zhao, Yong‐Lin Pi, Mark Andrew Bradford (2013). Elastic out-of-plane buckling load of circular steel tubular truss arches incorporating shearing effects. Engineering Structures.DOI
177. 窦超，郭彦林（2012）. 圆弧拱平面外弹性弯扭屈曲临界荷载分析. 《工程力学》.
178. 窦超，郭彦林（2012）. 受弯圆弧拱平面外稳定承载力分析. 《建筑结构学报》.
179. 窦超，郭彦林（2012）. 压弯圆弧拱平面外稳定承载力设计方法. 《建筑结构学报》.
180. 郭彦林，赵思远，窦超（2012）. 拱墙结构平面外失稳机理与设计研究. 《建筑结构学报》.
181. 剧锦三，丁敏，郭彦林，蒋秀根（2012）. 圆管拱结构平面外弹塑性二次分岔屈曲性能. 《工程力学》.
182. 窦超，郭彦林（2012）. 均匀受压圆弧拱平面外弹塑性稳定设计方法. 《建筑结构学报》.
183. 张博浩，郭彦林，赵思远，窦超，陈国栋（2012）. 异形空心构件螺栓端板连接节点设计与制作. 《施工技术(中英文)》.
184. 赵思远，郭彦林，张博浩，窦超（2012）. 异形空心构件螺栓端板连接节点受力机理及性能研究. 《施工技术(中英文)》.
185. 郭彦林，窦超（2012）. 有平面外支撑的工形截面圆弧钢拱弹性稳定性能及支撑刚度设计. 《建筑结构学报》.DOI
186. 郭彦林，窦超（2012）. 我国拱形钢结构设计理论研究现状与展望. 《建筑结构学报》.DOI
187. 郭彦林，姜子钦（2012）. 纯弯等截面焊接工字形梁整体稳定系数研究. 《建筑科学与工程学报》.
188. 尚仁杰，郭彦林，吴转琴，张心斌，孙文波（2011）. 基于索合力线形状的车辐式结构找形方法. 《工程力学》.
189. 郭彦林，田广宇，王昆，张博浩，赵思远（2011）. 宝安体育场车辐式屋盖结构整体模型施工张拉试验. 《建筑结构学报》.
190. 田广宇，郭彦林，张博浩，王昆，赵思远（2011）. 宝安体育场车辐式屋盖结构施工误差敏感性试验及误差限值控制方法研究. 《建筑结构学报》.DOI
191. 郭彦林，周明（2011）. 非加劲钢板剪力墙结构分析等代模型研究. 《工程力学》.
192. 郭彦林，王小安，姜子钦，白国良（2011）. 防屈曲支撑空冷岛结构体系的抗震性能. 《建筑科学与工程学报》.
193. 窦超，郭彦林（2011）. 单轴对称截面圆弧拱弹性弯扭屈曲临界荷载. 《建筑科学与工程学报》.
194. 郭彦林，周明，董全利，王小安（2011）. 三类钢板剪力墙结构试验研究. 《建筑结构学报》.
195. 王永海，郭彦林（2011）. 十字型刚架中轴压柱面外稳定性设计方法研究. 《工程力学》.
196. 郭彦林，王永海（2011）. 两层通高区群柱面外稳定性能与设计方法研究. 《工程力学》.
197. 郭彦林，周明（2011）. 非加劲与防屈曲钢板剪力墙性能及设计理论的研究现状. 《建筑结构学报》.
198. 郭彦林，王小安，张庆林，姜子钦（2011）. 波浪腹板门式刚架轻型房屋钢结构设计理论及应用. 《建筑结构》.DOI
199. 窦超，郭彦林，王永海，曹平周（2010）. 基于目标索力的“位移-荷载双控”张拉算法研究及应用. 《建筑结构学报》.DOI
200. 郭彦林，郭宇飞，窦超，林冰（2010）. 四边形截面圆弧空间钢管桁架拱平面内稳定性及试验研究. 《建筑结构学报》.DOI
201. 郭彦林，郭宇飞，窦超（2010）. 纯压圆弧形钢管桁架拱平面内稳定性能及设计方法. 《建筑结构学报》.DOI
202. 郭彦林，王永海（2010）. 广州新电视塔透空区外筒群柱面外稳定承载力与设计方法研究. 《建筑结构学报》.DOI
203. 刘学武，郭彦林，郭宇飞（2010）. 千斤顶单元法在大跨度钢屋盖拆撑过程数值模拟中的应用. 《施工技术(中英文)》.
204. 赵瑛，郭彦林（2010）. 防屈曲支撑框架设计方法研究. 《建筑结构》.DOI
205. 郭彦林，兰涛，田广宇，刘涛，田晋华（2010）. 泰达市民广场多折面钢结构及拉杆桁架支承体系和膜结构设计与研究. 《建筑结构》.DOI
206. 郭彦林，兰涛，田广宇，马智刚（2010）. 泰达市民文化广场金字塔钢结构及幕墙支承体系性能研究与设计. 《建筑结构》.DOI
207. 郭彦林，江磊鑫（2010）. 型钢组合装配式防屈曲支撑性能及设计方法研究. 《建筑结构》.DOI
208. 李波，胡少兵，郭彦林，冯宇飞（2010）. 某钢结构厂房的二阶效应影响研究. 《建筑结构》.DOI
209. 郭彦林，田广宇，张博浩，王昆（2010）. 施工环境温度对车辐式结构成型状态影响分析. 《建筑结构》.DOI
210. 郭彦林，王昆，田广宇，张博浩（2010）. 宝安体育场屋盖张拉结构施工环境温度影响分析. 《建筑结构》.
211. 郭彦林，田广宇，兰涛，王昆，刘涛（2010）. 点支式幕墙索支承体系的性能研究及工程应用. 《建筑结构》.
212. 郭彦林，窦超，王永海，曹平周，刘琼祥，倪绍文，郭满良，叶虔，李兴武（2010）. 深圳大运会体育中心体育场整体模型承载力试验研究. 《建筑结构学报》.
213. 郭彦林，郭宇飞，窦超（2010）. 钢管桁架拱平面内失稳与破坏机理的数值研究. 《工程力学》.
214. 郭彦林，王小安，张庆林（2010）. 波浪腹板变截面压弯构件稳定承载力设计方法和试验研究. 《工程力学》.
215. 郭彦林，窦超（2010）. 单层折面空间网格结构性能研究及设计. 《建筑结构学报》.
216. 郭彦林，王永海，刘禄宇，林冰，潘汉明，梁硕（2010）. 广州新电视塔底部透空区外筒群柱面外稳定承载力试验研究. 《建筑结构学报》.
217. 江磊鑫，郭彦林（2010）. 屈曲延迟型增强构件的设计方法. 《建筑科学与工程学报》.
218. 郭彦林，江磊鑫（2010）. 双矩管带肋约束型装配式防屈曲支撑的设计方法. 《建筑科学与工程学报》.
219. 王小安，郭彦林，兰涛（2010）. 采光天顶支承结构设计与施工一体化时变分析模型. 《建筑科学与工程学报》.
220. 郭彦林，田广宇，张博浩，王昆（2010）. 基于一次二阶矩可靠度指标的车辐式结构索长误差控制限值研究. 《建筑科学与工程学报》.
221. 郭彦林，周明（2009）. 钢板剪力墙的分类及性能. 《建筑科学与工程学报》.
222. 郭彦林，林冰，郭宇飞（2009）. 焊接工字形截面抛物线拱平面内稳定性试验研究. 《建筑结构学报》.
223. 林冰，郭彦林（2009）. 均匀受压工字型等截面三铰圆弧钢拱的平面内稳定性和极限强度. 《建筑结构》.DOI
224. 郭彦林，董全利，周明（2009）. 防屈曲钢板剪力墙滞回性能理论与试验研究. 《建筑结构学报》.DOI
225. 林冰，郭彦林（2009）. 纯压抛物线拱平面内稳定性及设计方法研究. 《建筑结构学报》.
226. 郭彦林，林冰（2009）. 中部等截面轴心受压梭形钢管柱的弹性屈曲荷载. 《建筑结构》.
227. 郭彦林，董全利，周明（2009）. 防屈曲钢板剪力墙弹性性能及混凝土盖板约束刚度研究. 《建筑结构学报》.
228. 郭彦林，周明，董全利（2009）. 防屈曲钢板剪力墙弹塑性抗剪极限承载力与滞回性能研究. 《工程力学》.
229. 郭彦林，盛和太，林冰，高巍（2008）. CCTV新台址主楼SRC柱承载力试验研究. 《建筑结构学报》.
230. 郭彦林，刘学武（2008）. 大跨度钢结构屋盖拆撑过程数值模拟的千斤顶-间隙单元法. 《西安建筑科技大学学报(自然科学版)》.
231. 郭彦林，刘学武（2008）. 钢结构施工力学状态非线性分析方法. 《工程力学》.
232. 郭彦林，田广宇，刘学武（2008）. 地基不均匀沉降对CCTV新台址主楼变形预调值的影响及分析. 《建筑结构学报》.
233. 高巍，郭彦林（2008）. CCTV新台址主楼外筒“米”形节点滞回性能数值研究. 《建筑结构学报》.
234. 盛和太，郭彦林（2008）. CCTV新台址主楼高含钢率SRC柱承载性能研究. 《建筑结构学报》.
235. 林冰，郭彦林，黄李骥（2008）. 均匀受压两铰圆弧钢拱的平面内稳定设计曲线. 《工程力学》.
236. 郭彦林，霍轶力，盛和太（2008）. CCTV新台址主楼SRC柱抗震计算模型的建立. 《建筑结构学报》.DOI
237. 郭彦林，高巍，林冰，盛和太（2008）. CCTV新台址主楼外筒“米”形节点滞回性能的试验研究. 《建筑结构学报》.DOI
238. 郭彦林，霍轶力（2008）. CCTV新台址主楼抗震性能研究. 《建筑结构学报》.
239. 郭彦林，周明（2008）. 两层单跨钢板墙的比较试验研究及其简化分析模型. 《第六届全国土木工程研究生学术论坛论文集》.
240. 郭彦林，王永海，刘禄宇（2008）. 广州新电视塔结构稳定性试验及理论研究. 《第六届全国土木工程研究生学术论坛论文集》.
241. 林冰，郭彦林（2008）. 实腹式等截面纯压钢拱的平面内弹性屈曲系数. 《建筑结构》.DOI
242. Hanming Pan, Yan‐Lin Guo, Shuo Liang, Shengxing Pei, Weisheng Liang, Wang Lewen (2008). Stability analysis of large diameter thin-walled tube beam-columns. Frontiers of Architecture and Civil Engineering in China.DOI
243. Yan‐Lin Guo, Jie Wang (2008). Instability behavior and application of prismatic multi-tube latticed steel column. Journal of Constructional Steel Research.DOI
244. 黄李骥，郭彦林（2007）. 实腹圆弧钢拱的平面内稳定极限承载力设计理论及方法. 《建筑结构学报》.DOI
245. 郭彦林，黄李骥（2007）. 腹板开洞钢拱的平面内稳定极限承载力设计理论及方法. 《建筑结构学报》.DOI
246. 郭兵，郭彦林，李光明（2007）. 半刚接钢框架的动力特性探讨. 《建筑结构》.
247. 郭彦林，霍轶力，盛和太，高巍，林冰（2007）. 中央电视台新台址主楼抗震性能研究. 《中国大型建筑钢结构工程设计与施工》.
248. 郭彦林，郭宇飞，刘学武（2007）. 大跨度钢结构屋盖落架分析方法. 《建筑科学与工程学报》.
249. 郭彦林，张庆林（2007）. 波折腹板工形构件翼缘稳定性能研究. 《建筑科学与工程学报》.
250. 黄李骥，郭彦林（2006）. 腹板开洞的工形截面拱的平面内特征值屈曲性能. 《工程力学》.
251. 崔晓强，郭彦林，叶可明（2006）. 大跨度钢结构施工过程的结构分析方法研究. 《工程力学》.
252. 剧锦三，蒋秀根，郭彦林，陈杰（2006）. 拱结构的弹塑性二次分岔屈曲性能. 《工程力学》.
253. 郭兵，郭彦林，柳锋，李光明，迟云（2006）. 焊接及螺栓连接钢框架的循环加载试验研究. 《建筑结构学报》.DOI
254. 郭彦林，张庆林（2006）. 波折腹板工形构件截面承载力设计方法. 《建筑科学与工程学报》.
255. 郭彦林，陈国栋，缪友武（2006）. 加劲钢板剪力墙弹性抗剪屈曲性能研究. 《工程力学》.
256. 郭彦林，缪友武，娄俊杰，林冰，徐衍林，崔巍（2005）. 澳门综合体育馆主桁架整体提升及提升塔架分析. 《建筑结构学报》.
257. 邓科，郭彦林（2005）. 轴心受压梭形变截面钢管格构柱的弹性屈曲性能. 《工程力学》.
258. 崔晓强，郭彦林（2005）. 弦支穹顶结构的抗震性能研究. 《地震工程与工程振动》.
259. 郭彦林，潘湧，刘涛，罗颖（2004）. 变截面门式钢刚架结构稳定承载力的试验与理论研究. 《建筑结构学报》.
260. 陈国栋，郭彦林，范珍，韩艳（2004）. 钢板剪力墙低周反复荷载试验研究. 《建筑结构学报》.
261. 陈国栋，郭彦林（2004）. 十字加劲钢板剪力墙的抗剪极限承载力. 《建筑结构学报》.
262. 崔晓强，郭彦林，叶可明（2004）. 滑动环索连接节点在弦支穹顶结构中的应用. 《同济大学学报(自然科学版)》.
263. Xiao-Xiong Cui, Yan‐Lin Guo (2004). Influence of Gliding Cable Joint on Mechanical Behavior of Suspen-Dome Structures. International Journal of Space Structures.DOI
264. 王宏，郭彦林，任革学（2003）. 大跨度悬吊索系结构目标位置成形分析方法. 《工程力学》.
265. 陈国栋，郭彦林（2003）. 非加劲板抗剪极限承载力. 《工程力学》.
266. 崔晓强，郭彦林（2003）. Kiewitt型弦支穹顶结构的弹性极限承载力研究. 《建筑结构学报》.
267. 郭彦林，崔晓强（2003）. 滑动索系结构的统一分析方法——冷冻-升温法. 《工程力学》.
268. 王宏，郭彦林，崔晓强（2003）. 索—拱杂交结构动力反应分析. 《工程力学》.
269. 郭彦林，陈国栋，兰勇（2002）. 三管梭形钢格构柱稳定极限承载力研究. 《建筑结构学报》.DOI
270. 剧锦三，郭彦林，刘玉擎（2002）. 拱结构的弹性二次屈曲性能. 《工程力学》.
271. 郭彦林，兰勇，高玉峰，曹平周，陈国栋，王宏，崔晓强，刘涛（2002）. 三管梭形钢格构柱足尺寸破坏性稳定试验研究. 《建筑结构学报》.
272. 陈国栋，郭彦林，梁志，李伟峰（2002）. 广州新白云国际机场航站楼结构分析的关键问题. 《建筑结构学报》.
273. 王宏，郭彦林，任革学，路英杰，林贵斌（2002）. 500m口径球面射电望远镜馈源支撑结构体系试验研究与理论分析. 《建筑结构学报》.DOI
274. 鲍广鉴，郭彦林，李国荣，王煦，陈国栋，刘涛（2002）. 广州新白云国际机场航站楼钢结构整体曲线滑移施工技术. 《建筑结构学报》.DOI
275. 兰勇，郭彦林，陈国栋（2002）. 梭形钢管格构柱弹性屈曲性能. 《建筑结构学报》.DOI
276. 兰勇，郭彦林，刘涛，黄李骥，邓科，韩艳（2002）. 三管梭形钢格构柱缩尺模型破坏性稳定试验研究. 《建筑结构学报》.DOI
277. 剧锦三，郭彦林 (2002). In-Plane Elastic Buckling of Arch. Tsinghua Science and Technology.
278. 刘建平，郭彦林（2001）. K型方、圆管相贯节点的极限承载力非线性有限元分析. 《建筑科学》.
279. 郭彦林，刘建平，陈国栋（2001）. 管节点承载力有限元分析. 《管结构技术交流会》.
280. 刘建平，郭彦林（2001）. 管节点弹塑性大挠度有限元分析. 《青海大学学报》.
281. 李时，郭彦林（2001）. 波折腹板梁抗剪性能研究. 《建筑结构学报》.
282. 剧锦三，郭彦林（2001）. 索-拱结构的平面内稳定性研究. 《建筑结构学报》.
283. 郭彦林，王文明，石永久（2000）. 变截面门式刚架结构的非线性性能. 《工程力学》.
284. 王文明，郭彦林，赵熙元（1999）. 变截面门式钢刚架结构体系平面内稳定研究. 《建筑结构学报》.DOI
285. 赵晓林，郭彦林（1998）. 21世纪轻型钢结构的发展与展望. 《中国土木工程学会第八届年会》.
286. 郭彦林，Ｒ．Ｓｃｈａｒｄｔ（1998）. 冷弯薄壁槽形截面钢柱的优化设计. 《应用力学学报》.
287. Yan‐Lin Guo, Yutaka Fukumoto (1996). Theoretical study of ultimate load of locally buckled stub columns loaded eccentrically. Journal of Constructional Steel Research.DOI
288. 郭彦林，梅占馨（1992）. 加筋板的非线性相关屈曲研究. 《应用力学学报》.
289. 郭彦林（1992）. 冷弯薄壁槽钢截面柱局部与整体相关屈曲. 《建筑结构学报》.
290. 郭彦林，陈绍蕃（1992）. 冷弯薄壁箱形梁柱构件局部与整体稳定相关作用的弹塑性分析. 《工程力学》.
291. 郭彦林（1991）. 矩形板在面内荷载作用下的非线性屈曲分析. 《应用力学学报》.
292. 郭彦林（1991）. 材料和几何线性的有限条分析. 《工程力学》.
293. 郭彦林（1990）. 冷弯薄壁箱形截面柱在偏心荷载作用下的弹塑性屈曲. 《工程力学》.

预印本

1. Hao-Jun Sun, Yan-Guo Hou, Yan‐Lin Guo, Wei Zhang, Chen Xian (2025). Buckling Behaviour and Design of the Built-Up Radially Battened Composite Column. SSRN Electronic Journal.DOI
2. Yan-Guo Hou, Yan‐Lin Guo, Chen-Bao Wen, Xiaojin Zhu, Qidong Zhang (2025). Interactive Strength Design of Built-Up Tt-Csps Under Combined Bending and Shear. SSRN Electronic Journal.DOI
3. Xiangyu Zhao, Yan‐Lin Guo, Xiaojin Zhu, Qidong Zhang (2025). Capacity Prediction for Cfst-Csp Composite Walls Subjected to Compression and Bending. SSRN Electronic Journal.DOI

书籍章节

1. Yanlin Guo, Chen-Bao Wen, Hao-Jun Sun (2025). Study and Application of Steel and Composite Walls with Corrugated Steel Plates in China. WORLD SCIENTIFIC eBooks.DOI
2. Yan‐Lin Guo, Yan Han, W.Q. Hao, Tingfa Liu (2002). Elastic torsional-flexural buckling of tapered I beam-columns. Elsevier eBooks.DOI
3. Tingfa Liu, Yan‐Lin Guo (2002). Load-carrying capacity of box section beam-column. Elsevier eBooks.DOI
4. Yan‐Lin Guo, Yong Pan (2002). In-plane ultimate load-carrying capacity of tapered I columns. Elsevier eBooks.DOI
5. Yan Han, Zheng Fang, Yan‐Lin Guo (2002). Instability behavior of the prestressed steel-concrete composite continuous beam. Elsevier eBooks.DOI