Rui Zhao, Yuan Zong, Guang Li, Ling Zhao, Gance Dai (2024). Study on Interfacial Mass Transport and Process Intensification for Ionic Liquid [BMIM]Br Synthesis. Industrial & Engineering Chemistry Research.DOI
Wei-Tong Pan, Bin Wang, Long-Fei Tang, Yunfei Gao, Lu Ding, Zheng-Hua Dai, Xueli Chen, Fuchen Wang, Shan-Tung Tu, Gance Dai (2023). A novel design of distribution zone in scaled‐up PEM fuel cells based on active control of transverse flow. AIChE Journal.DOI
Jinhu Jiang, Cai-ying Lu, S. Shen, Qi-Fan Deng, Bei Wang, Chun-Yin Shen, Yanli Wang, L. Zhan, Gance Dai (2023). Effect of air gap induction on the morphological microstructure of polyether sulfone hollow fiber membrane. Journal of Applied Polymer Science.DOI
He Shi, Y. Zong, Ling Zhao, Gance Dai (2023). Flow and mass transfer for the adsorption separation of para-xylene in a packed bed by particle-resolved CFD simulations. Chemical Engineering and Science.DOI
Wei-Tong Pan, Zhe-Kun Chen, Xueli Chen, Fuchen Wang, Gance Dai (2022). Slot die coating window for a uniform fuel cell ink dispersion. AIChE Journal.DOI
Lu Zhang, Haoran Zhang, Jinhu Jiang, Dong Zhao, Chun-Yin Shen, Shangwen Zha, Shaoyi Qu, Run-Ji Lin, Yanli Wang, Gance Dai (2022). Rheological behavior of
PES
/
PVP
/
DMAc
solution and
PVP
structural regulation for hollow fiber membrane. Journal of Applied Polymer Science.DOI
Hao Gu, Dennis T. Lee, Peter Corkery, Yurun Miao, Jung-Sik Kim, Yu-Chen Yuan, Zhen-Liang Xu, Gance Dai, G. Parsons, I. Kevrekidis, Li-Wei Zhuang, M. Tsapatsis (2022). Modeling of deposit formation in mesoporous substrates via atomic layer deposition: insights from pore‐scale simulation. AIChE Journal.DOI
Wei-Tong Pan, Zhe-Kun Chen, Xueli Chen, Fuchen Wang, Gance Dai (2022). Analytical and numerical investigation of flow distribution in PEMFC stacks. Chemical Engineering Journal.DOI
Le-Qi Li, Han-Guang Xie, Long He, B. Deng, Y. Zong, Xiaogang Yang, Ling Zhao, Gance Dai (2022). Numerical Investigation of Twin-liquid Film on Spoked Rotating Disk Reactor with Highly Viscous Fluid. Chemical Engineering and Science.DOI
Han-Guang Xie, Lian Shen, Gance Dai (2022). Asymmetric flow and mass transfer of twin-liquid films. International Journal of Heat and Mass Transfer.DOI
Wei-Tong Pan, Xueli Chen, Fuchen Wang, Gance Dai (2021). Investigation on the sufficiency and uniformity of channel-porous layer flow in PEM fuel cells.DOI
Li-Wei Zhuang, Peter Corkery, Dennis T. Lee, Seungjoon Lee, M. Kooshkbaghi, Zhen-Liang Xu, Gance Dai, I. Kevrekidis, M. Tsapatsis (2021). Numerical simulation of atomic layer deposition for thin deposit formation in a mesoporous substrate. AIChE Journal.DOI
Juan Huang, Botao Zhang, Gance Dai, Chen Chen, Hai-Yan Yu, Huaixiang Tian (2021). Synergistic effects in coaxial mixers: the controlling strategy of the flow and shear. Chemical Engineering & Technology.DOI
Wei-Tong Pan, Zhe-Kun Chen, Dingsong Yao, Xueli Chen, Fuchen Wang, Gance Dai (2021). Microstructure and macroscopic rheology of microporous layer nanoinks for PEM fuel cells.DOI
Han-Guang Xie, Y. Zong, Lian Shen, Gance Dai (2021). Interfacial mass transfer intensification with highly viscous mixture.DOI
Wei-Tong Pan, Xueli Chen, Gance Dai, Fuchen Wang (2020). Enhanced Effect of Bubble Deformation on Internal Particle Transport.DOI
Wei-Tong Pan, Xueli Chen, Fuchen Wang, Gance Dai (2020). Mass transfer enhancement of PEM fuel cells with optimized flow channel dimensions.DOI
Wei-Tong Pan, Peng-Hui Wang, Xueli Chen, Fuchen Wang, Gance Dai (2020). Combined effects of flow channel configuration and operating conditions on PEM fuel cell performance.DOI
Li-Wei Zhuang, Gance Dai, Zhen-Liang Xu (2020). CFD study on the performance of hollow fiber ultrafiltration membrane modules with different fiber arrangement. Desalination and Water Treatment.DOI
Peng-Hui Wang, Wei-Tong Pan, Gance Dai (2020). A CFD‐based design scheme for the perforated distributor with the control of radial flow.DOI
Wei-Tong Pan, Ping Li, Quan-Quan Gan, Xueli Chen, Fuchen Wang, Gance Dai (2020). Thermal stability analysis of cold start processes in PEM fuel cells.DOI
Han-Guang Xie, Jiang-Tao Hu, Cheng Wang, Gance Dai (2018). Liquid flow transition and confined free film formation on a vertical plate with an open window.DOI
Peng-Hui Wang, Gance Dai (2018). Field Synergy of the Rod Bank on the Enhancement of Mass Transfer in a Spray Column. Industrial & Engineering Chemistry Research.DOI
Peng-Hui Wang, Gance Dai (2018). Synergistic effect between spraying layers on the performance of the WFGD spray column. Asia-Pacific Journal of Chemical Engineering.DOI
Xu Fang, Chun-Yin Shen, Gance Dai (2018). The influence of compatibilizers on the structure and mechanical properties of lightweight reinforced thermoplastics.DOI
Han-Guang Xie, Jiang-Tao Hu, Gance Dai (2018). Numerical simulation on flow behavior of twin‐liquid films over a vertical plate with an open window.DOI
Li-Wei Zhuang, Yang Wang, Zhen-Liang Xu, Gance Dai (2018). Transient Simulation of Hollow-Fiber Membrane Filtration with Nonuniform Permeability Distribution. Chemical Engineering & Technology.DOI
Li-Wei Zhuang, Gance Dai, Zhen-Liang Xu (2018). Three‐dimensional simulation of the time‐dependent fluid flow and fouling behavior in an industrial hollow fiber membrane module.DOI
Xu Fang, Chun-Yin Shen, Gance Dai (2017). Comparative investigation of molded thickness and surface density on the structures and mechanical properties of lightweight reinforced thermoplastic composites. Fibers And Polymers.DOI
Jiang-Tao Hu, Xiao-Gang Yang, Jian-Guo Yu, Gance Dai (2017). Carbon dioxide (CO2) absorption and interfacial mass transfer across vertically confined free liquid film-a numerical investigation.DOI
Juan Huang, Gance Dai (2017). Granular Flow of Corn Stover Particles in a Helical Ribbon Stirred Tank.DOI
Juan Huang, Gance Dai (2017). Synergistic and interference effects in coaxial mixers: Numerical analysis of the power consumption.DOI
Li-Wei Zhuang, Han-Fei Guo, Gance Dai, Zhen-Liang Xu (2017). Effect of the inlet manifold on the performance of a hollow fiber membrane module-A CFD study.DOI
Peng-Hui Wang, Li-Wei Zhuang, Gance Dai (2017). Synergistic effect of droplet self-adjustment and rod bank internal on fluid distribution in a WFGD spray column.DOI
Jiang-Tao Hu, Xiao-Gang Yang, Jian-Guo Yu, Gance Dai (2016). Numerical investigation on hydrodynamics of vertically confined free film.DOI
Xu Fang, Chun-Yin Shen, Gance Dai (2016). Mechanical properties of unidirectional continuous fiber tapes reinforced long fiber thermoplastics and their manufacturing.DOI
Li-Wei Zhuang, Gance Dai (2016). Numerical simulation of dynamic process during outside-in dead-end filtration in hollow fiber membrane module.
邓斌，戴干策（2015）. 圆盘反应器流场数值模拟. 《化学反应工程与工艺》.
黄娟，戴干策（2015）. 同轴异速组合桨的流动特性研究. 《2015年中国化工学会年会论文集》.
邓斌，戴干策（2015）. 圆盘反应器液膜表面更新数值模拟. 《化工学报》.
胡剑光，刘佳特，王成，于建国，戴干策（2015）. 丝网板液膜流动及传质. 《化工学报》.
Di Mao, Bharat Indu Chaudhary, Bin Sun, Chunyin Shen, Dongming Yuan, Gan‐Ce Dai, Bin Li, Jeffrey M. Cogen (2015). Absorption and migration of bio‐based epoxidized soybean oil and its mixtures with tri(2‐ethylhexyl) trimellitate in poly(vinylchloride). Journal of Applied Polymer Science.DOI
Y. Zong, B. Deng, Han-Guang Xie, Jiang-Tao Hu, Xiao-Gang Yang, Gance Dai (2015). EXPERIMENTAL AND NUMERICAL SIMULATION OF FILM FLOW ON A ROTATING DISK.
Li-Wei Zhuang, Han-Fei Guo, Peng-Hui Wang, Gance Dai (2015). Study on the flux distribution in a dead-end outside-in hollow fiber membrane module.DOI
P. Ren, Gance Dai (2014). Fiber dispersion and breakage in deep screw channel during processing of long fiber-reinforced polypropylene. Fibers And Polymers.DOI
Jiang-Tao Hu, Xiao-Gang Yang, Jian-Guo Yu, Gance Dai (2014). Numerical simulation of carbon dioxide (CO2) absorption and interfacial mass transfer across vertically wavy falling film.DOI
Gance Dai (2013). Migration of Epoxidized Soybean Oil in Plasticized Poly(vinyl chloride).
Juan Huang, Jian Zhang, Yanqing He, Jie Bao, Gance Dai (2013). Dynamic Characteristics and Speed Control Strategy of Cellulose Hydrolysis Reactor at High Solids Loading.DOI
Jiang-Tao Hu, Jia-T. Liu, Jian-Guo Yu, Gance Dai (2013). CO2 absorption into highly concentrated DEA solution flowing over a vertical plate with rectangular windows.DOI
Bin Sun, Bharat Indu Chaudhary, Chunyin Shen, Di Mao, Dongming Yuan, Gan‐Ce Dai, Bin Li, Jeffrey M. Cogen (2012). Thermal stability of epoxidized soybean oil and its absorption and migration in poly(vinylchloride). Polymer Engineering and Science.DOI
Gance Dai (2012). Statistical Characteristics of Wavy Falling Films over Micro Textured Surfaces.
Y. Zong, Gance Dai, Xiao-Bing Huang, Xiao-Gang Yang (2012). Large Eddy Simulation (LES) of Glass-Fibre-Loaded Flow in an Internally Spout-Fluidised Bed for Processing of Thermoplastic Composites.DOI
Gance Dai (2012). Effect of Breaker Plate Structure on Morphology of Long Glass Fiber in Extrusion Compounding.
Gance Dai (2012). Development and scale up of the enzymatic cellulose hydrolysis reactor.
Gance Dai (2011). Rheological Properties of Xanthan Gum Solutions.
Gance Dai (2011). Numerical Simulation of Residence Time Distribution in Single Screw Extruders.
Gance Dai (2011). Solid Suspension Characteristics in a Three-phase Shallow Bubble Column.
Gance Dai (2011). Lattice Boltzmann simulation for impregnation of LWRT.
Gance Dai (2011). Effect of Time and Temperature on Plasticizer Absorption of Suspension Poly(vinyl chloride) Resin.
Gance Dai (2011). Wettability of Modified Polymer Surface and Liquid Film Behavior.
Gance Dai (2011). Surface-Film-Formation Behavior of Modified Polypropylene.
Gance Dai (2011). Measurement of Trailing Vortices around a Hydrofoil Impeller with PIV and Large Eddy Simulation.
Y. Zong, Xiao-Gang Yang, Gance Dai (2011). Design Simulation of Glass-Fiber-Loaded Flow in an Internally Spout-Fluidized Bed for Processing of Thermoplastic Composites. I. Flow Characterization.DOI
蔡清白，戴干策（2010）. 两相/三相翼形浆搅拌反应器的泛点研究(英文). Chinese Journal of Chemical Engineering.
Gance Dai (2010). Analysis and Simulation of the Flow Field in a Helical Ribbon Stirred Tank.
Jian Zhang, De-Qiang Chu, Zhanchun Yu, Xiaoxi Zhang, Hong-Bo Deng, Xiusheng Wang, Zhinan Zhu, Huai-Qing Zhang, Gance Dai, Jie Bao (2010). [Process strategy for ethanol production from lignocellulose feedstock under extremely low water usage and high solids loading conditions]. Sheng wu gong cheng xue bao = Chinese journal of biotechnology.
Gance Dai (2010). Gas Holdup in a Shallow Bubble Column Measured by Electrical Capacitance Tomography(ECT).
Gance Dai (2010). Pre-extraction of Hemicellulose from Corn Stover under Microwave Irradiation.
Gance Dai (2010). Liquid Phase Mixing Time in Bubble Columns.
Qing-Bai Cai, Xuesong Shen, Chun-Yin Shen, Gance Dai (2010). A simple method for identifying bubbling/jetting regimes transition from large submerged orifices using electrical capacitance tomography (ECT).DOI
Qing-Bai Cai, Gance Dai (2010). Flooding Characteristics of Hydrofoil Impeller in a Two- and Three-phase Stirred Tank.DOI
Gance Dai (2010). Treatment for the Inherent Properties of Natural Fibers and Its Effects on the Natural Fiber Composites.
Gance Dai (2010). Mechanical and Thermal Properties of Polypropylene/ZnO Composite.
Zhangteng Sun, Haibo Han, Gance Dai (2010). Mechanical Properties of Injection-molded Natural Fiber-reinforced Polypropylene Composites: Formulation and Compounding Processes.DOI
Gance Dai (2009). Prediction on impact strength of sisal fiber/polypropylene composites.
Gance Dai (2009). Preparation and Mechanical Properties of PP/PP-g-GMA/Sisal Fiber Composite.
Jia-Ting Zhang, Jian Zhang, Gance Dai, Jie Bao, Juan Huang (2009). Combined stirring paddle.
Guang Li, Qing-Bai Cai, Gance Dai, Xiao-Gang Yang (2009). Numerical simulations of fluid dynamics and mixing in a large shallow bubble column: effects of the sparging pipe allocations for multiple-pipe gas distributors.DOI
Gance Dai (2009). Correlation Between Thermal Properties and Rheological Behavior of Graphite Filled Polypropylene.
Guang Li, Xiao-Gang Yang, Gance Dai (2009). CFD simulation of effects of the configuration of gas distributors on gas–liquid flow and mixing in a bubble column.DOI
Juan Huang, Yue-Ming Ma, Gance Dai (2009). Mixing Phenomena in Gas Stirred Liquid Systems.DOI
Jia-Ting Zhang, Jian Zhang, Gance Dai, De-Qiang Chu, Jie Bao, Juan Huang (2009). Bioreactor for producing ethanol by using lignocellulose materials with high solid content.
Jian Zhang, De-Qiang Chu, Juan Huang, Zhanchun Yu, Gance Dai, Jie Bao (2009). Simultaneous saccharification and ethanol fermentation at high corn stover solids loading in a helical stirring bioreactor. Biotechnology and Bioengineering.DOI
Bin Lee, Gance Dai (2009). Influence of interfacial modification on the thermal conductivity of polymer composites.DOI
Gance Dai (2009). Numerical simulation of the mixing ability of the channel in a single-screw extruder.
Gance Dai (2009). Adsorption and encapsulation phenomena in thermoplastic composite.
Gance Dai (2009). Effect of Surface Tension on the Impregnation of Glass Fiber Mat Reinforced Thermoplastic(GMT).
Gance Dai (2009). Properties and heat-conduction mechanism of thermally conductive polymer composites.
Gance Dai (2008). Study on the Aging Properties of Polyolefins Thermal Conductive composites.
Gance Dai (2008). Chaotic Characteristics in Shallow Gas-Liquid Two-Phase Bubble Columns.
Xiao-Ye Liu, Gance Dai (2008). Impregnation of thermoplastic resin in jute fiber mat.DOI
Gance Dai (2008). Sound Absorption Properties of Lightweight Reinforced Thermoplastic Laminates.
Gance Dai (2008). Gas Holdup in a Bubble Column at Elevated Temperature with Organic Liquid Solutions.
Gance Dai (2008). Shear-Thickening of PBT Composites.
Y. Zong, Yongfeng Cheng, Gance Dai (2008). The Relationship Between Rheological Behavior and Toughening Mechanism of Toughened Poly(Ethylene Terephthalate).DOI
Gance Dai (2008). Mechanical Properties of PBT Toughened with PTW and PBT/PTW Alloy Reinforced with GF.
Gance Dai (2008). Preparation of GMT Materials with High Fluidity.
Gance Dai (2008). Application of CFD simulation for optimisation of the multi-pipe gas distributors in a large-scale shallow bubble column.
Guang Li, Xiao-Gang Yang, Gance Dai (2008). CFD Simulation of Gas-Liquid Flow in Bubble Column with Two-bubble Phase Population Balance Model.
Gance Dai (2008). Bubble formation from large submerged single orifice at high gas velocity.
Gance Dai (2006). Effects of Interface Coupling Reaction on the Rheology of Polypropylene/Glass Bead System.
Gance Dai (2006). Application of β-Form Nucleating Agent for Polypropylene II.Non-isothermal Crystallization Kinetics of Polypropylene Nucleated by β-Form Nucleating Agent.
Gance Dai (2006). Application of β-Form Nucleating Agent for Polypropylene I.Effect of β-Form Nucleating Agent on Crystallization Behavior and Mechanical Property of Polypropylene.
Gance Dai (2006). Properties of the Thermal Conductive Composite Based on Graphite Modified PEX.
Min Guo, Xiao-Dong Zhou, Gance Dai, Fu-Zeng Hu (2005). Polypropylene/Ethylene-Octene Copolymer/Organic-Montmorillonite Nanocomposites.DOI
Gance Dai (2005). EFFECT OF SILANE SURFACE TREATMENT ON RHEOLOGY OF POWDER SUSPENSION.
Gance Dai (2005). Study on Crystallization Behavior and Morphology of β form iPP Induced by DC26NDCA.
Gance Dai (2005). Analysis of Shrinkage Mark on Ribs of GMT Parts.
Xiao-Dong Zhou, Q. Lin, R. Xiong, X. Cui, Gance Dai (2005). Effect of Flexible Polymer Coating on Interfacial Adhesion of Glass Fibre Reinforced Polypropylene.DOI
Gance Dai (2004). Study on Lofting Behavior of Long Fiber Reinforced PP-GMT.
Gance Dai (2004). Compatibilization of Silane Grafted Polypropylene on PP/GF Composites.
Wei Zhu, Guang-Ping Zhang, Jian-Yong Yu, Gance Dai (2004). Crystallization behavior and mechanical properties of polypropylene copolymer by in situ copolymerization with a nucleating agent and/or nano‐calcium carbonate.DOI
Ke Zhao, Pei-Qin Sun, Da-Zhuang Liu, Gance Dai (2004). The formation mechanism of poly(vinyl acetate)/poly(butyl acrylate) core/shell latex in two-stage seeded semi-continuous starved emulsion polymerization process ☆.DOI
Gance Dai (2004). Compatibilizing mechanism and effect of silane grafted polypropylene on GMT-PP.
Y. Luo, Gance Dai (2004). Absorption of trioctyl trimellitate into mass-polymerization and suspension-polymerization poly(vinyl chloride).DOI
Gance Dai (2004). Effect of Block Copolymer Coupling Agents on the Interfacial Adhesion of Glass Fiber Reinforced Polypropylene.
Quan-De Gui, Z. Xin, Wei Zhu, Gance Dai (2003). Effects of an organic phosphorus nucleating agent on crystallization behaviors and mechanical properties of poly(propylene).DOI
Gance Dai (2003). STUDYING ON COMPATIBILIZING PVC／POE THERMOPLAS TIC ELASTOMER.
Gance Dai (2002). Solid Phase Graft of Maleic anhydride onto Polypropylene in Helical Ribbon Reactor.
Ruo-Fei Zhao, Xiao-Dong Zhou, Gance Dai (2002). Effect of the microstructure of GMT on its mechanical properties.DOI
Ruo-Fei Zhao, Gance Dai (2002). Mechanical property and morphology comparison between the two blends poly(propylene)/ethylene-propylene-diene monomer elastomer and poly(propylene)/maleic anhydride-g-ethylene-propylene-diene monomer.DOI
Q. Lin, Xiao-Dong Zhou, Gance Dai, Yiemao Bi (2002). Some studies on mechanical properties of wood flour/continuous glass mat/polypropylene composite.DOI
Q. Lin, Xiao-Dong Zhou, Gance Dai (2002). Effect of hydrothermal environment on moisture absorption and mechanical properties of wood flour–filled polypropylene composites.DOI
Y. Luo, Gance Dai (2002). Effect of poly(vinyl chloride) resin type in the preparation process of slush powder.DOI
Xiao-Dong Zhou, Gance Dai, Q. Lin (2002). Improvement in impact property of continuous glass mat reinforced polypropylene composites.DOI
Xiao-Dong Zhou, Q. Lin, Gance Dai (2002). Studies on Mechanical Properties of Discontinuous Glass Fiber/Continuous Glass Mat/Polypropylene Composite.DOI
Mengru Tang, Xue-Jun Cao, Zuozhen Liu, Xing-Yan Wu, Gance Dai (1999). Synthesis of glycidyl methacrylate-based matrix and its application in affinity chromatography of urokinase.DOI
Wei-Guang Yao, Koji Takahashi, K. Koyama, Gance Dai (1997). Two-Dimensional Dynamic Analysis of Distributive Mixing in Pin Mixing Section of Screw Extruder.DOI
Wei-Guang Yao, Koji Takahashi, K. Koyama, Gance Dai (1997). Design of a new type of pin mixing section for a screw extruder based on analysis of flow and distributive mixing performance.DOI
Wei-Guang Yao, K. Takahashi, K. Koyama, Gance Dai (1997). Experimental study on distributive mixing characteristics of a new type of pin mixing section.DOI
徐魁，戴干策（1996）. 气液固三相体系搅拌功率与气固分散状态的研究. 《化学工程师》.
肖作兵，徐宏，吴湘萍，戴干策（1996）. 非牛顿流体中的单气泡行为研究. 《化学工程师》.
蔡志武，戴干策（1996）. 搅拌混合中的循环与剪切. 《化工学报》.
张辉，方图南，戴干策（1996）. 剪切稀化悬浮体流变性的唯象模型. 《化工学报》.
Xue-Jun Cao, Jia-Wen Zhu, Da-Wei Wang, Xing-Yan Wu, Gance Dai (1996). Purification of Urokinase by Affinity Cross‐flow Filtration Using a Water‐soluble Macroligand a. Annals of the New York Academy of Sciences.DOI