刘焜

期刊论文

1. 豆航，许吉敏，王一凡，王伟，刘焜（2026）. 液体火箭涡轮泵三垫流体箔片轴承转子系统非线性动力学特性研究. 《摩擦学学报(中英文)》.
2. Xiaomeng Zhu, Jian Hao Zhou, Xiaojun Liu, Lihua Li, Jiaxin Ye, Wei Wang, Kun Liu (2026). Velocity-dependent evolution of central wear and lateral third-body retention in a carbide-bonded graphene/steel reciprocating contact. Tribology International.DOI
3. 王梦娇，胡新政，刘焜，樊学峰，孟祥铠，彭旭东，王金清（2025）. 激光微织构排布方式对铝青铜摩擦学性能影响研究. 《摩擦学学报(中英文)》.DOI
4. 张炜，龚旭，海博展，吴威昌，林晨康，刘焜（2025）. 二维颗粒尺度铁粉压制中力学拓扑特征量化. 《粉末冶金工业》.DOI
5. Zitong Huang, Tianci Chen, Yijiang Wang, Qingrui Song, Kun Liu, Jiaxin Ye (2025). Traceable Force Calibration (TFC) for Microtribometers via Diamagnetic Levitation and Microbalance. Tribology Letters.DOI
6. Cheng Zheng, Jimin Xu, Haiyang Gu, Shuo Cheng, Lin Sun, Kun Liu, Tomoko Hirayama (2025). Interfacial tribofilm stability and friction-reduction mechanisms of esterification-grafted MXene. Tribology International.DOI
7. Zitong Huang, Qingrui Song, Kun Liu, Jiaxin Ye (2025). In-situ Investigation of Stick–Slip Behavior of an Elastic String: Insights into Fiber-Based Friction. Tribology Letters.DOI
8. Jiawei Ji, Fangbin Wang, Wei Liu, Xiaojun Liu, Xiaojun Liu, Yunlong Jiao, Kun Liu (2025). Formation mechanism of air cavity and drag reduction properties for spheres with varied wettability during water entry. Colloids and Surfaces A Physicochemical and Engineering Aspects.DOI
9. Yunlong Jiao, Xi Chen, Yuhang Guo, Jiawei Ji, Jiaxiang Wang, Xuejie Zhang, Xiaojun Liu, Kun Liu (2025). Achieving the Bidirectional Transportation of Boiling Droplets on the Functional Ratchet-Valley Array. Langmuir.DOI
10. Tianci Chen, Qingrui Song, Zitong Huang, Kun Liu, Jiaxin Ye (2025). Scaling Up AFM Friction Studies: Tailored Probes for Cross-Scale Measurements on Single-Crystal MoS2. Tribology Letters.DOI
11. Hang Dou, Longgui He, Cuiping Zhang, Wei Wang, Kun Liu, Jimin Xu (2025). Novel Fluid Foil Compound Bearings Incorporating Superconducting Magnetic Field for Reusable Rocket Turbopumps: Lubrication Characteristics and Nonlinear Rotor Dynamics. Journal of Computational and Nonlinear Dynamics.DOI
12. Yunlong Jiao, Xi Chen, Xiaojun Liu, Jiawei Ji, Wei Wang, Xuejie Zhang, Kun Liu (2025). Dynamic Behavior of Droplet Impact on a Superheated Particle Bed. ACS Applied Materials & Interfaces.DOI
13. Wei Juan Jiang, Kun Liu, Xiaojun Liu, Yi Feng, Jiaxin Ye (2025). Statistical modeling of multi-asperity wear and transfer in polymer-metal interfaces. Wear.DOI
14. Cheng En Zheng, Tomoko Hirayama, Naoki Yamashita, Haiyang Gu, Wei Wang, Kun Liu, Jimin Xu (2025). Underlying Mechanisms of Improved Cryogenic Tribological Performance of the Pure Graphite: Suppressed Thermal Atomic Motions and Enhanced Mechanical Properties. Journal of Tribology.DOI
15. Kaisen Zhang, Kun Liu, Tianyan Gao, Wei Wang, Xiaojun Liu, Jiaxin Ye (2025). Friction beyond the Amontons-Coulomb Law: A hidden pitfall in granular solids mechanics. Tribology International.DOI
16. Wei Zhang, Bozhan Hai, Rongxin Chen, Xu Gong, Kun Liu, Hui Zhong, Guofu Lian (2025). Analysis on friction characteristics and stick-slip behavior based on PDMS sponge. Surfaces and Interfaces.DOI
17. Wei Juan Jiang, Kun Liu, Xiaojun Liu, Yi Feng, Jiaxin Ye (2025). Revealing the Tribochemical Evolution of PTFE Transfer Films During Ambient Aging. Journal of Tribology.DOI
18. Qingrui Song, Jiaxin Ye, Shengming Zhang, Jianjun Yuan, Rongxin Chen, Kun Liu (2025). In situ experimental study on the evolution of liquid bridge geometry and adhesion under shear: Effects of volume, separation distance, and velocity. Colloids and Surfaces A Physicochemical and Engineering Aspects.DOI
19. Nan Zheng, Baohong Tong, Guotao Zhang, Zhaochang Wang, Wei Wang, Kun Liu (2025). Jet characteristics of multiple oil droplets impinging process under the influence of micro-bubbles. Physics of Fluids.DOI
20. 李直，杜溢渊，徐志明，乔旭钱，刘焜（2024）. 织构表面摩擦特性与三维形貌参数的关系研究. 《润滑与密封》.
21. 王兆长，刘小君，童宝宏，张国涛，刘焜，焦云龙（2024）. 考虑表面形貌效应的球体入水动力学特性研究. 《中国科学:物理学 力学 天文学》.
22. Yunlong Jiao, Yu Jie Du, Yuhang Guo, Jiawei Ji, Jiaxiang Wang, Xiaojun Liu, Kun Liu (2024). Dominant Role of Surface Peak–Valley Features in Droplet Infiltration Dynamics. Langmuir.DOI
23. Yunlong Jiao, Jiaxiang Wang, Yuhang Guo, Yu Jie Du, Yongqing Zhu, Jiawei Ji, Xiaojun Liu, Kun Liu (2024). Effect of the Surface Peak–Valley Features on Droplet Impact Dynamics under Leidenfrost Temperature. Langmuir.DOI
24. Jiawei Ji, Wei Sun, Yu Jie Du, Yongqing Zhu, Yuhang Guo, Xiaojun Liu, Yunlong Jiao, Kun Liu (2024). Topographic variation and fluid flow characteristics in rough contact interface. Friction.DOI
25. Jiawei Ji, Xiaojun Liu, Wei Wang, Yunlong Jiao, Kun Liu (2024). Synergistic Effect of Microconvex Texture and Particle Medium on the Tribological Property of the Rubber Sliding Interface. Langmuir.DOI
26. Kaisen Zhang, Kun Liu, Danfeng Sun, Tianyan Gao, Jiaxin Ye (2024). Friction Variability in Slip Rings: Geometry and Stiffness Effects. Journal of Tribology.DOI
27. Xuejie Zhang, Wei Liu, Xuehui Chen, Wei Wang, Kun Liu, Jian Hao Zhou (2024). Investigation on the rheological properties of dense granular inertial flow based on the contact features of four dual-partitioned subnetworks. Tribology International.DOI
28. Zhaochang Wang, Xiaojun Liu, Yuhang Guo, Baohong Tong, Guotao Zhang, Kun Liu, Yunlong Jiao (2024). Armored Superhydrophobic Surfaces with Excellent Drag Reduction in Complex Environmental Conditions. Langmuir.DOI
29. Zhaochang Wang, Xiaojun Liu, Jiawei Ji, Yuhang Guo, Yongqing Zhu, Guotao Zhang, Baohong Tong, Yunlong Jiao, Kun Liu (2024). Suppressed Droplet Splashing on Positively Skewed Surfaces for High‐Efficiency Evaporation Cooling. Small.DOI
30. 高天燕，张开森，叶家鑫，刘小君，刘焜（2023）. PDMS材料特性和滑动速度对黏着态下摩擦峰的影响. 《摩擦学学报(中英文)》.DOI
31. 高天燕，张开森，叶家鑫，刘小君，刘焜（2023）. 界面润湿性和粗糙度对橡胶滑动摩擦行为的影响. 《摩擦学学报(中英文)》.DOI
32. 张国涛，马镇，童宝宏，焦云龙，尹延国，刘焜（2023）. 固液双相作用下多孔自润滑表面渗流行为分析. 《摩擦学学报(中英文)》.
33. 张炜，袁传牛，萧伟健，陈荣昕，张宁，刘焜（2023）. 粉末压制中粉末形状对粉体力学行为的影响. 《锻压技术》.DOI
34. 李直，徐志明，杜溢渊，乔旭钱，刘焜（2023）. 弹流润滑条件下织构表面亚表层特性研究. 《润滑与密封》.
35. Jimin Xu, Xing Gao, Hang Dou, Cuiping Zhang, Wei Wang, Kun Liu (2023). Improved cryogenic frictional properties of thrust ball bearings in liquid nitrogen through PTFE cages and dimple-type textures. Cryogenics.DOI
36. Wei Sun, Qingrui Song, Kun Liu, Qing Zhang, Zhensheng Tao, Jiaxin Ye (2023). Comparative study on boundary lubrication of Ti3C2Tx MXene and graphene oxide in water. Friction.DOI
37. Yi Zhang, Wei Wang, Gang Wang, Pengcheng Huang, Jimin Xu, Kun Liu (2023). Experimental Detection of Lubrication Characteristics in a Solid–Liquid Two-Phase Flow Supported Bearing-Rotor System Using Vibration Monitoring Techniques. Tribology Transactions.DOI
38. Yunlong Jiao, Xidong Hu, Yongqing Zhu, Yuhang Guo, Jiawei Ji, Yu Jie Du, Jiaxiang Wang, Xiaojun Liu, Wei Wang, Kun Liu (2023). Dynamic Behavior of Droplet Impact on Laminar Superheated Particles. Langmuir.DOI
39. Yuhang Guo, Xiaojun Liu, Jiawei Ji, Zhaochang Wang, Xidong Hu, Yongqing Zhu, Tao Zhang, Tongtong Tao, Kun Liu, Yunlong Jiao (2023). Delayed Leidenfrost Effect of a Cutting Droplet on a Microgrooved Tool Surface. Langmuir.DOI
40. Jun Du, Ning Liu, Cheng En Zheng, Fang Zhang, Xing Gao, Kun Liu, Jimin Xu (2023). Development of a novel reciprocating cryogenic tribometer through deformations of measurement structure. Review of Scientific Instruments.DOI
41. Qingrui Song, Kun Liu, Wei Sun, Yunlong Jiao, Xiaojun Liu, Jiaxin Ye (2023). Liquid Bridge Modulated Friction: From Millimeter to Nanometer. Tribology Letters.DOI
42. Wei Juan Jiang, Wei Sun, Kun Liu, Xiaojun Liu, Jiaxin Ye (2023). Tribochemical driven interfacial energy gradient in ultralow wear PTFE composite. Tribology International.DOI
43. Jiaxin Ye, Shuaikang Li, Wei Sun, Xiaojun Liu, Kun Liu (2023). The Ultralow Wear Tipping Point Between Wear and Tribochemistry. Tribology Letters.DOI
44. Cheng En Zheng, Xing Gao, Fan Zhang, Wei Wang, Kun Liu, Jimin Xu (2023). High-quality surface polishing of selective-laser-melting stainless steel by defoamed magnetorheological elastomer. Precision Engineering.DOI
45. 孙魏，刘小君，刘焜，叶家鑫（2022）. 环境水氧对纳米氮化铝/聚四氟乙烯复合材料摩擦学性能的影响. 《摩擦学学报(中英文)》.
46. 张炜，谈健君，张帅，陈荣昕，陈丙三，张宁，刘焜（2022）. 基于颗粒物质力学的铁粉末压制中摩擦特性对力链演化影响. 《摩擦学学报(中英文)》.
47. 张毅，王伟，魏道高，王刚，许吉敏，刘焜（2022）. 高速涡轮增压器轴承-转子系统不平衡响应及稳定性分析. 《摩擦学学报(中英文)》.
48. 张炜，萧伟健，袁传牛，张宁，刘焜（2022）. 离散元法铁粉末压制中粒径分布对力链演化机制的影响. 《力学学报》.
49. 裴宁，刘小君，季佳伟，张涛，王兆长，焦云龙，刘焜（2022）. 微观凸织构及润湿性对橡胶滑动接触界面摩擦特性的影响. 《中国表面工程》.
50. 王彬，周剑，祝宸宇，李莉华，叶家鑫，刘小君，刘焜（2022）. 多层碳键联石墨烯涂层的宏观摩擦磨损特性. 《中国表面工程》.
51. 张国涛，史英康，童宝宏，焦云龙，尹延国，刘焜（2022）. 含油轴承表面供油行为与自润滑机理分析. 《摩擦学学报(中英文)》.
52. 鄢晓宇，刘小君，魏道高，刘焜，王伟（2022）. 受限颗粒体对制动系统非线性振动的影响. 《摩擦学学报(中英文)》.
53. 董慧芳，孔俊超，胡健，刘焜（2022）. 轴表面微织构对唇形油封的密封性能影响研究. 《热加工工艺》.
54. Yi Zhang, Wei Wang, Daogao Wei, Gang Wang, Jimin Xu, Kun Liu (2022). Dynamic stability of unbalance-induced vibration in a turbocharger rotor-bearing system with the nonlinear effect of thermal turbulent lubricating fluid film. Journal of Sound and Vibration.DOI
55. Gang Wang, Wei Wang, Yi Zhang, Jinlong Shen, Jimin Xu, Kun Liu (2022). A solution for mixed elastohydrodynamic lubrication modeling considering effects of solid particles and surface roughness. Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology.DOI
56. Wei Juan Jiang, Wei Sun, Kun Liu, Xiaojun Liu, Kaisen Zhang, Qing Zhang, Jiaxin Ye (2022). How moisture driven mechanochemistry stabilizes transfer film adhesion and cohesion in ultralow wear PTFE composite. Wear.DOI
57. Zhaochang Wang, Jiawei Ji, Yuhang Guo, Tongtong Tao, Xidong Hu, Yongqing Zhu, Xiaojun Liu, Kun Liu, Yunlong Jiao (2022). Robust air cavity generation on sacrificial microstructures for sustainable underwater drag reduction. Applied Physics Letters.DOI
58. Xuejie Zhang, Wei Wang, Tong Zhang, Xiaojun Liu, Kun Liu (2022). Contributions of strong and weak subnetworks to the shear strength of dense granular inertial flow. Tribology International.DOI
59. Yunlong Jiao, Tao Zhang, Jiawei Ji, Yuhang Guo, Zhaochang Wang, Tongtong Tao, Jimin Xu, Xiaojun Liu, Kun Liu (2022). Functional Microtextured Superhydrophobic Surface with Excellent Anti-Wear Resistance and Friction Reduction Properties. Langmuir.DOI
60. Tianyan Gao, Kaisen Zhang, Yijian Wang, Kun Liu, Xiaojun Liu, Jiaxin Ye (2022). Contribution of meniscus force to friction of multi-asperity sliding contact. Tribology International.DOI
61. Jimin Xu, Ning Liu, Fang Zhang, Jun Du, Cheng En Zheng, Xin Gao, Kun Liu (2022). Frictional Behaviors of 3D-Printed Polylactic Acid Components With Spiral-Groove Surface Textures Under Oil Lubrication. Journal of Tribology.DOI
62. Xuejie Zhang, Wei Wang, Xiaojun Liu, Kun Liu (2022). Effect mechanism of contact sliding state on rheological properties of dense granular inertial flow. Powder Technology.DOI
63. Tongtong Tao, Zhaochang Wang, Jiawei Ji, Yuhang Guo, Yongqing Zhu, Xidong Hu, Kun Liu, Yunlong Jiao (2022). Influence of superhydrophobic area occupancy and impact angle on the water entry dynamics of spheres. Physics of Fluids.DOI
64. Yingkang Shi, Guotao Zhang, Baohong Tong, Yunlong Jiao, Yanguo Yin, Kun Liu (2022). Characteristics of droplet exudation on slippery liquid-infused porous surfaces considering thermal effect. Surface and Coatings Technology.DOI
65. Qingrui Song, Kun Liu, Wei Sun, Yunlong Jiao, Zhaochang Wang, Xiaojun Liu, Jiaxin Ye (2022). Contact angle hysteresis and lateral adhesion strength on random rough surfaces. Physics of Fluids.DOI
66. Zhaochang Wang, Tongtong Tao, Yongqing Zhu, Xidong Hu, Yuhang Guo, Jiawei Ji, Xiaojun Liu, Kun Liu, Yunlong Jiao (2022). Water entry dynamics of rough microstructured spheres. Physics of Fluids.DOI
67. Jiawei Ji, Xiaojun Liu, Yan Zhang, Yunlong Jiao, Kun Liu (2022). Synergetic effect of surface connectivity and functional parameters on the friction characteristics of a sliding contact interface. Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology.DOI
68. Jiaxin Ye, Siqi Yao, Wei Sun, Longlong Li, Wei Juan Jiang, Kaisen Zhang, Kun Liu (2022). Bridging asperity adhesive wear and macroscale material transfer. Tribology International.DOI
69. Jian Hao Zhou, Hongkun Xu, Chenyu Zhu, Lihua Li, Man Cheung Ng, Kun Liu (2022). Characterization and growth mechanisms of adhesion‐induced microcavities during debonding of softened glass. International Journal of Applied Glass Science.DOI
70. Tianyan Gao, Kaisen Zhang, Xiaojun Liu, Kun Liu, Jiaxin Ye (2022). Linking macroscale frictional properties to nanoscale water capillary bridges. Tribology International.DOI
71. Qingrui Song, Kun Liu, Wei Sun, Jiaxin Ye (2022). Dead Weight Microtribometer Calibration for Improved Tolerance to Transducer Crosstalk and Cantilever Torsion. Tribology Letters.DOI
72. Nan Zheng, Baohong Tong, Guotao Zhang, Xiaolei Hu, He Liang, Wei Wang, Kun Liu (2022). Numerical study on flow and heat transfer characteristics of two oil droplets impinging the wall simultaneously under the influence of micro-bubble. International Journal of Heat and Mass Transfer.DOI
73. Xuejie Zhang, Wei Wang, Xiaojun Liu, Kun Liu (2022). Transient Evolution of Rheological Properties of Dense Granular Inertial Flow Under Plane Shear. Tribology Letters.DOI
74. Jian Hao Zhou, Hongkun Xu, Chenyu Zhu, Bin Wang, Kun Liu (2022). Comparisons Between 2D and 3D MPFEM Simulations in Modeling Uniaxial High Velocity Compaction Behaviors of Ti-6Al-4V Powder. Archives of Metallurgy and Materials.DOI
75. Tianyan Gao, Kun Liu, Kaisen Zhang, Qingrui Song, Jiaxin Ye, Xiaojun Liu (2022). Transient High Friction Dominated by High Shear Strength Residual Water Film. Tribology Letters.DOI
76. Wei Sun, Qingrui Song, Kun Liu, Xiaojun Liu, Jiaxin Ye (2022). The limit of adhesive debris retention: A case study using ultra-low wear Alumina–PTFE. Wear.DOI
77. Guotao Zhang, Yingkang Shi, Baohong Tong, Yunlong Jiao, Yanguo Yin, Kun Liu (2022). Exudation behavior and pinning effect of the droplet on slippery liquid-infused porous surfaces (SLIPS). Surface and Coatings Technology.DOI
78. 艾文涛，周剑，胡坤宏，刘焜，刘小君（2021）. PMMA温变摩擦磨损特性研究. 《合肥工业大学学报(自然科学版)》.
79. 沈锦龙，许吉敏，焦云龙，刘焜，刘小君（2021）. 考虑界面粗糙度动态变化的点接触弹流润滑特性研究. 《摩擦学学报(中英文)》.DOI
80. 孟凡净，刘华博，花少震，刘焜（2021）. 金属粉末单轴压制过程中的摩擦机制及力学特性分析. 《应用力学学报》.
81. Zhen-Yuan Jia, Bing Liang, Wei Liu, Kun Liu, Jianwei Ma (2021). 3D Microdisplacement Monitoring of Large Aircraft Assembly with Automated In Situ Calibration. Engineering.DOI
82. Bing Liang, Wei Liu, Kun Liu, Meng-De Zhou, Yang Zhang, Zhen-Yuan Jia (2021). A Portable Noncontact Profile Scanning System for Aircraft Assembly.DOI
83. Yi Zhang, Wei Wang, Daogao Wei, Gang Wang, Jimin Xu, Kun Liu (2021). Coupling analysis of tribological and dynamical behavior for a thermal turbulent fluid lubricated floating ring bearing-rotor system at ultra-high speeds. Tribology International.DOI
84. Jinlong Shen, Tong Zhang, Jimin Xu, Xiaojun Liu, Kun Liu (2021). Experimental study on friction coefficient and temperature rise of heavy-load grease-lubricated spherical plain bearings with surface texture. Industrial Lubrication and Tribology.DOI
85. Nan Zheng, Baohong Tong, Guotao Zhang, Xiaolei Hu, He Liang, Wei Wang, Kun Liu (2021). Heat transfer characteristics of successive oil droplet impingement under minimum quantity lubrication. Physics of Fluids.DOI
86. Wei Sun, Jiaxin Ye, Xiaojun Liu, Kun Liu (2021). Atomistic Insights Into Anti-Wear Mechanisms and Protective Tribofilm Formation in Polytetrafluoroethylene Composites. Journal of Tribology.DOI
87. Qingrui Song, Kun Liu, Wei Sun, Rongxin Chen, Jiawei Ji, Yunlong Jiao, Tianyan Gao, Jiaxin Ye (2021). Lateral and Normal Capillary Force Evolution of a Reciprocating Liquid Bridge. Langmuir.DOI
88. Zhaochang Wang, Xiaojun Liu, Jiawei Ji, Tongtong Tao, Tao Zhang, Jimin Xu, Yunlong Jiao, Kun Liu (2021). Underwater Drag Reduction and Buoyancy Enhancement on Biomimetic Antiabrasive Superhydrophobic Coatings. ACS Applied Materials & Interfaces.DOI
89. Gang Wang, Wei Wang, Yi Zhang, Xu Zhang, Zhaowen Hu, Kun Liu, Daogao Wei (2021). Study on micro-plastic behavior and tribological characteristics of granular materials in friction process. Industrial Lubrication and Tribology.DOI
90. Wei Sun, Xiaojun Liu, Kun Liu, Yan Zhang, Yunxiang Lu, Jiaxin Ye (2021). Suppression of wear in gallium nitride fibers reinforced fluoropolymer composites: Synergistic effects of load support and tribochemistry. Tribology International.DOI
91. Jimin Xu, Ning Liu, Zhi Li, Jun Du, Yunlong Jiao, Kun Liu, Cuiping Zhang (2021). Contactless Mechanical Power Transmission Through the High-Tc Superconducting Pinning Effect. Journal of Superconductivity and Novel Magnetism.DOI
92. Tianyan Gao, Jiaxin Ye, Kaisen Zhang, Xiaojun Liu, Yan Zhang, Kun Liu (2021). Role of capillary adhesion in the friction peak during the tacky transition. Friction.DOI
93. Kaisen Zhang, Kun Liu, Tianyan Gao, Yongliang Qiao, Yan Zhang, Xiaojun Liu, Wei Wang, Jiaxin Ye (2021). The unrecognized importance of roughness directionality to polymer wear. Wear.DOI
94. Wei Sun, Xiaojun Liu, Kun Liu, Jimin Xu, Yunxiang Lu, Jiaxin Ye (2021). Mechanochemical functionality of graphene additives in ultralow wear polytetrafluoroethylene composites. Carbon.DOI
95. Rongxin Chen, Wei Zhang, Wei Sun, Qingrui Song, Jiaxin Ye, Xiaojun Liu, Kun Liu (2021). Investigation on the multiscale stick-slip phenomenon of cotton fabric. Materials Today Communications.DOI
96. Wei Sun, Xiaojun Liu, Qingrui Song, Kun Liu, Wei Wang, Yunxiang Lu, Jiaxin Ye (2021). Mechanochemical Effect of Filler Surface Functionality on Fluoropolymer Tribology. Macromolecules.DOI
97. Jiaxin Ye, Jiazhou Xuan, Yongliang Qiao, Yifan Zhang, Haiyang Zhang, Jimin Xu, Xiaojun Liu, Kun Liu (2021). A Simple Analysis of Texture-Induced Friction Reduction Based on Surface Roughness Ratio. Tribology Letters.DOI
98. Jiawei Ji, Yunlong Jiao, Qingrui Song, Yan Zhang, Xiaojun Liu, Kun Liu (2021). Bioinspired Geometry-Gradient Metal Slippery Surface by One-Step Laser Ablation for Continuous Liquid Directional Self-Transport. Langmuir.DOI
99. Xuejie Zhang, Wei Sun, Wei Wang, Kun Liu (2021). Experimental investigation of granular friction behaviors during reciprocating sliding. Friction.DOI
100. Jian Hao Zhou, Hongkun Xu, Chenyu Zhu, Wentao Ai, Xiaojun Liu, Kun Liu (2021). High-temperature friction characteristics of N-BK7 glass and their correlation with viscoelastic loss modulus. Ceramics International.DOI
101. Yunlong Jiao, Yiyuan Zhang, Xiaodong Lv, Jiawei Ji, Zhaochang Wang, Yahui Su, Xiaojun Liu, Kun Liu (2021). In Situ Tuning Underwater Bubble Movement on Slippery Lubricant-Infused Anisotropic Microgrooved Surface by Unidirectional Mechanical Strain. Langmuir.DOI
102. Yunlong Jiao, Chuanzong Li, Jiawei Ji, Zhaochang Wang, Tongtong Tao, Tao Zhang, Kun Liu (2021). Femtosecond laser-induced shape memory polymer micropillar with tunable wettability and reversible adhesion for underwater oil droplet lossless transfer. Applied Physics Letters.DOI
103. Yi Zhang, Wei Wang, Kun Liu, Baohong Tong, Zhaowen Hu, Ruhong Song (2021). Thermomechanical analysis on the frictional contact behavior of a high-strength steel 22MnB5–die steel H13 tribopair at 800 °C by experiment and finite-element simulation. Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology.DOI
104. 董磊，车飞飞，刘焜，王俊元，石瑞敏（2020）. 表面形貌对粗糙接触界面流体润滑特性的影响. 《润滑与密封》.
105. 施迅，王伟，刘焜，陈锐，杨璐，冯圣友（2020）. 微观随机粗糙表面接触有限元模型的构建与接触分析. 《润滑与密封》.
106. Bing Liang, Wei Liu, Kun Liu, Meng-De Zhou, Yang Zhang, Zhen-Yuan Jia (2020). A Displacement Field Perception Method for Component Digital Twin in Aircraft Assembly. Italian National Conference on Sensors.DOI
107. Zhi Li, Jianmei Wang, Hong Zhang, Jian Chen, Kun Liu (2020). Influence of surface topography on the friction and dynamic characteristics of spur gears. Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology.DOI
108. Wei Sun, Xiaojun Liu, Kun Liu, Jimin Xu, Wei Wang, Jiaxin Ye (2020). Paradoxical Filler Size Effect on Composite Wear: Filler–Matrix Interaction and Its Tribochemical Consequences. Tribology Letters.DOI
109. Jian Hao Zhou, Chenyu Zhu, Lihua Li, Man Cheung Ng, Kun Liu (2020). Temperature and rate dependent debonding behaviors of precision glass molding interface. Journal of the American Ceramic Society.DOI
110. Wei Zhang, Kun Liu, Jian Hao Zhou, Rongxin Chen, Ning Zhang, Guofu Lian (2020). Characteristic Analysis of the Stress Propagation of Metal Powder in High Velocity Compaction Using DEM. Journal of the Physical Society of Japan.DOI
111. Wei Sun, Xiaojun Liu, Kun Liu, Wei Wang, Jiaxin Ye (2020). Ultralow wear PTFE composites filled with beryllia and germania particles. Wear.DOI
112. Jiaxin Ye, Wei Juan Jiang, Jia Zeng, Kazi Istiaque Alam, Wei Sun, Xiaojun Liu, Kun Liu, David L. Burris (2020). Interfacial Gradient and Its Role in Ultralow Wear Sliding. The Journal of Physical Chemistry C.DOI
113. Xiaoyu Yan, Wei Wang, Xiaojun Liu, Jimin Xu, Daogao Wei, Kun Liu (2020). A multi-contact model to study the dynamic stick-slip and creep in mechanical frictional pair. Journal of Advanced Mechanical Design Systems and Manufacturing.DOI
114. 刘焜，陈希章，徐淑文（2019）. 激光熔覆低温相变合金熔覆层的热疲劳性能. 《中国表面工程》.
115. 孟凡净，刘焜（2019）. 压力载荷对颗粒润滑界面动力学特性的影响. 《机械科学与技术》.
116. Bing Liang, Wei Liu, Xintong Jiang, Di Feng, Kun Liu, Meng-De Zhou, Xiao Li, Zhen-Yuan Jia (2019). A Novel Automatic Calibration Method for Displacement Sensors Based on the Spatial Transformation Theory*. 2019 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM).DOI
117. Fanjing Meng, Minghua Pang, Kun Liu (2019). Constitutive relation and mechanical mechanism analysis in granular lubrication. Industrial Lubrication and Tribology.DOI
118. Cong Liu, Baohong Tong, Guotao Zhang, Peimin Xu, Wei Wang, Kun Liu (2019). Effect of air supply speed on point contact sliding wear characteristics under oil‐air lubrication conditions. Lubrication Science.DOI
119. Jian Hao Zhou, Chenyu Zhu, Wei Zhang, Wentao Ai, Xuejie Zhang, Kun Liu (2019). Experimental and 3D MPFEM simulation study on the green density of Ti–6Al–4V powder compact during uniaxial high velocity compaction. Journal of Alloys and Compounds.DOI
120. Lei Dong, Xiaoyu Zhang, Kun Liu, Xiaojun Liu, Ruiming Shi, Junyuan Wang, Feng Liu (2019). Wear behaviors of WC and TiC on co matrix composites under three-body impact abrasive wear condition. Industrial Lubrication and Tribology.DOI
121. Wei Zhang, Jian Hao Zhou, Xue-Jie Zhang, Kun Liu (2019). Quantitative Investigation into the Relation between Force Chains and Stress Transmission During High-Velocity Compaction of Powder. Journal of the Korean Physical Society.DOI
122. 孟凡净，刘焜（2018）. 颗粒流润滑系统力传输行为的试验研究. 《摩擦学学报(中英文)》.DOI
123. 焦云龙，叶家鑫，刘小君，刘焜（2018）. 表面润湿性对橡胶滑动接触界面摩擦特性的影响. 《机械工程学报》.
124. 逄明华，刘小君，焦云龙，刘焜（2018）. 橡胶-玻璃接触界面间液体渗入特性及力学驱动机制. 《应用数学和力学》.
125. 张炜，周剑，于世伟，张雪洁，刘焜（2018）. 基于颗粒物质力学的粉末高速压制过程中应力传递分布分析. 《应用力学学报》.
126. 张炜，周剑，于世伟，张雪洁，刘焜（2018）. 双轴压缩下颗粒物质接触力与力链特性研究. 《应用力学学报》.
127. 孟凡净，刘焜，吴华伟（2018）. 颗粒流润滑剪切膨胀的力学机制研究. 《工程力学》.
128. 董磊，叶家鑫，石瑞敏，刘焜（2018）. 基于原位观测的固体表面真实接触面积计算. 《润滑与密封》.
129. Fanjing Meng, Kun Liu (2018). The stick-slip mechanism for granular flow lubrication. Industrial Lubrication and Tribology.DOI
130. Cong Liu, Baohong Tong, Guotao Zhang, Wei Wang, Kun Liu, Peimin Xu (2018). Effect of behavior of oil–air lubrication flow on characteristic of point contact sliding wear. Industrial Lubrication and Tribology.DOI
131. Fanjing Meng, Kun Liu, Tao Qin (2018). Experimental investigations of force transmission characteristics in granular flow lubrication. Industrial Lubrication and Tribology.DOI
132. Tian-Xun Xiu, Wei Wang, Kun Liu, Zhiyong Wang, Daozhu Wei (2018). Characteristics of force chains in frictional interface during abrasive flow machining based on discrete element method. Advances in Manufacturing.DOI
133. Minghua Pang, Xiaojun Liu, Kun Liu (2018). Effect of conical micro-grooved texture on tool–chip friction property and cutting performance of WC-TiC/Co cemented carbide tools. Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology.DOI
134. Yunlong Jiao, Xiaojun Liu, Kun Liu (2018). Experimental study on wet skid resistance at different water-film thicknesses. Industrial Lubrication and Tribology.DOI
135. Minghua Pang, Xiaojun Liu, Kun Liu (2018). Effect of surface texture on the friction of WC-TiC/Co cemented carbide under a water-miscible cutting fluid environment. Industrial Lubrication and Tribology.DOI
136. Jiaxin Ye, Wei Sun, Yan Zhang, Xiaojun Liu, Kun Liu (2018). Measuring Evolution of Transfer Film–Substrate Interface Using Low Wear Alumina PTFE. Tribology Letters.DOI
137. Yunlong Jiao, Xiaojun Liu, Kun Liu (2018). Wettability of laser textured surface: a parametric study based on numerical simulation and experimentation. Industrial Lubrication and Tribology.DOI
138. Yunlong Jiao, Jiawei Ji, Kun Liu, Wei Wang (2018). Effect of microtexturing on powder boundary layer: An experimental study based on laser microscopy and profilometry measurements. Lubrication Science.DOI
139. Fanjing Meng, Kun Liu (2018). Mechanical Study on the Effect of Granular Friction in a Granular System under Biaxial Compression. Journal of the Korean Physical Society.DOI
140. 张彤，刘小君，董磊，刘焜（2017）. 三维表面形貌的逾渗特性表征. 《仪器仪表学报》.
141. 孟凡净，刘焜，秦涛（2017）. 颗粒流润滑力链演变及动力学状态的研究. 《西安交通大学学报》.
142. 逄明华，刘焜，刘小君（2017）. 锥形微通道内液滴自输运特性及力学驱动机制研究. 《应用数学和力学》.
143. 田明，王超，杨斌，刘焜（2017）. 粉末润滑界面边界层状态微观形态观察和分析. 《表面技术》.
144. Chao Wang, Wei Wang, Yong Liu, Kun Liu (2017). Micro morphological observation and mechanism analysis of boundary layer evolution in mixed powder lubrication. Lubrication Science.DOI
145. Jiaxin Ye, Bo Tao, Wei Sun, Diana R. Haidar, Kazi Istiaque Alam, Kun Liu, David L. Burris (2017). The Competing Effects of Counterface Peaks and Valleys on the Wear and Transfer of Ultra-Low Wear Alumina–PTFE. Tribology Letters.DOI
146. Minghua Pang, Xiaojun Liu, Kun Liu (2017). Effect of wettability on the friction of a laser-textured cemented carbide surface in dilute cutting fluid. Advances in Mechanical Engineering.DOI
147. Jiaxin Ye, Haiyang Zhang, Xiaojun Liu, Kun Liu (2017). Low Wear Steel Counterface Texture Design: A Case Study Using Micro-pits Texture and Alumina–PTFE Nanocomposite. Tribology Letters.DOI
148. Zhi Li, Jian Chen, Jiazhu Li, Kun Liu (2017). Effect of textured surface on the frictional noise under line contact and sliding–rolling conditions. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
149. Jian Hao Zhou, Lihua Li, Feng Gong, Kun Liu (2017). Quality dependence study on dimensions for plano‐concave molded glass lenses. International Journal of Applied Glass Science.DOI
150. Jingjing Chang, Wei Wang, Ming Hao Zhao, Kun Liu (2017). Experimental study and simulation analysis on friction behavior of a mechanical surface sliding on hard particles. Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology.DOI
151. 焦云龙，刘小君，逄明华，刘焜（2016）. 液滴平壁铺展过程中的滞后效应及力学机制研究. 《应用数学和力学》.
152. 昌晶晶，王伟，顾伟，刘焜（2016）. 三体介质温成形界面接触换热特性的试验研究. 《摩擦学学报(中英文)》.
153. 焦云龙，刘小君，刘焜（2016）. 离散型织构表面液滴的铺展及其接触线的力学特性分析. 《力学学报》.
154. 季佳伟，刘焜，王伟（2016）. 激光微造型对粉末润滑界面边界层行为和润滑特性的影响. 《摩擦学学报(中英文)》.
155. 王伟，孔俊超，顾伟，刘焜（2016）. 温成形摩擦界面粉末润滑层宏微观特性的试验研究. 《摩擦学学报(中英文)》.DOI
156. 董帮源，刘小君，王静，刘焜（2016）. 表面织构对重载线接触条件下40Cr钢摩擦性能的影响. 《摩擦学学报(中英文)》.
157. 史超，王伟，刘焜（2016）. 接触压力与粉末层厚度对塑性拉延过程的影响. 《合肥工业大学学报(自然科学版)》.
158. 李皓，刘小君，张彤，刘焜（2016）. 表面粗糙度对接触界面间流体流动的影响. 《合肥工业大学学报(自然科学版)》.
159. Zhanqi Tang, Xiaojun Liu, Kun Liu (2016). Effect of surface texture on the frictional properties of grease lubricated spherical plain bearings under reciprocating swing conditions. Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology.DOI
160. Bin Yang, Wei Wang, Kun Liu, Yong Liu (2016). Observation and Analysis of Micro-Behavior Characteristics and Element Contents during Boundary Layer Evolution under Powder Particulate Lubrication. Tribology Letters.DOI
161. 熊其玉，王伟，贾文兵，刘焜（2015）. 面接触多体摩擦过程界面特性试验研究. 《应用力学学报》.
162. 王伟，史超，王智勇，刘焜（2015）. 多参数对三体摩擦界面剪切膨胀过程的影响. 《应用力学学报》.
163. 杨超，刘小君，杨海东，刘焜（2015）. 表面织构对刀具切削性能及前刀面摩擦特性的影响. 《摩擦学学报(中英文)》.
164. 胡兆稳，刘焜，刘小君，刘奎（2015）. 表面形貌变形对塑性成形滑动接触界面摩擦的影响. 《摩擦学学报(中英文)》.
165. 汤占岐，刘焜，王伟，刘小君（2015）. 转动与摆动复合运动下脂润滑关节轴承的数值分析. 《应用数学和力学》.
166. 王飞，刘焜，王伟（2014）. 颗粒的堵塞行为对单向压制过程的影响. 《应用力学学报》.
167. 刘小君，董磊，王森，李国瑞，刘焜（2014）. 微凹坑织构表面对脂润滑关节轴承摩擦特性的影响. 《摩擦学学报(中英文)》.DOI
168. 杨本杰，刘小君，董磊，王伟，刘焜（2014）. 表面形貌对滑动接触界面摩擦行为的影响. 《摩擦学学报(中英文)》.
169. Wei Wang, Wei Gu, Kun Liu (2014). Force Chain Evolution and Force Characteristics of Shearing Granular Media in Taylor-Couette Geometry by DEM. Tribology Transactions.DOI
170. Fanjing Meng, Kun Liu, Wei Wang (2014). The Force Chains and Dynamic States of Granular Flow Lubrication. Tribology Transactions.DOI
171. 王伟，刘小君，刘焜，刘勇，王召唤（2013）. 颗粒流润滑径向滑动轴承从起动到稳定的动态过程研究. 《第十一届全国摩擦学大会》.
172. 刘焜（2013）. 面向产品性能的表面形貌设计与控制. 《第十一届全国摩擦学大会》.
173. 朱桂庆，王伟，刘焜（2013）. 基于FEM-DEM的三体摩擦界面中接触行为与应力的多尺度分析. 《应用力学学报》.
174. 孟凡净，刘焜，王伟（2013）. 剪切平行板间密集颗粒流的接触力分布及各向异性分析. 《应用数学和力学》.
175. 胡兆稳，刘焜，王伟，刘小君（2013）. 塑性成形表面微凸体平坦化行为研究. 《润滑与密封》.
176. 贾文兵，王伟，刘焜，王召唤（2013）. 游离磨粒研磨过程三体界面的摩擦学特性测试和分析. 《合肥工业大学学报(自然科学版)》.
177. 李杨，刘小君，王庆生，刘焜（2013）. 线接触状态下激光加工微造型表面摩擦特性研究. 《摩擦学学报(中英文)》.
178. 王智勇，王伟，刘焜（2013）. 三体摩擦界面剪切膨胀过程典型阶段的力链形态及承载特性. 《工程力学》.
179. Wei Wang, Wei Gu, Kun Liu, Wang Fei, Zhanqi Tang (2013). DEM Simulation on the Startup Dynamic Process of a Plain Journal Bearing Lubricated by Granular Media. Tribology Transactions.DOI
180. Wei Wang, Zhan Qi Tang, Wei Gu, Kun Liu (2013). DEM Simulation on Dilatancy Phenomenon of Confined Granular Assembly under Shearing in Parallel Interface. Applied Mechanics and Materials.DOI
181. Kun Liu (2013). Effect of Laser Textured Surfaces on the Frictional Property in Line Contact. Tribology.
182. Kun Liu (2013). PATTERN AND LOAD CARRYING BEHAVIOR OF FORCE CHAINS INVOLVING THE TYPICAL SHEARING DILATANCY PROCESS IN FRICTIONAL THIRD-BODY INTERFACE. Engineering Mechanics.
183. Kun Liu (2013). Influence of surface micro-asperity shape on three-body friction interface gap. Journal of Hefei University of Technology.
184. 王伟，刘小君，刘焜（2012）. 颗粒流润滑过程中粉末层的微观破坏形式和机理分析. 《摩擦学学报(中英文)》.DOI
185. 董慧芳，刘焜，王伟，刘小君（2012）. 激光加工微凹坑轴表面对唇形密封泵吸及摩擦特性的影响. 《摩擦学学报(中英文)》.DOI
186. 李媛，刘小君，张彦，刘焜（2012）. 面接触条件下织构表面摩擦特性研究. 《机械工程学报》.
187. 王庆生，刘焜（2012）. 裙部型线对活塞裙部混合润滑特性影响的仿真分析. 《内燃机学报》.
188. 张志斌，刘焜，王伟（2012）. 激光面加工熔凝区的低压磨粒流抛光影响因素的实验研究. 《润滑与密封》.
189. Wei Wang, Xiaojun Liu, Kun Liu (2012). Surface observations of a powder layer during the damage process under particulate lubrication. Wear.DOI
190. Wei Wang, Xiaojun Liu, Kun Liu (2012). Experimental Research on Force Transmission of Dense Granular Assembly Under Shearing in Taylor–Couette Geometry. Tribology Letters.DOI
191. Wei Wang, Xiaojun Liu, Kun Liu, Qi Yu Xiong (2012). DEM Simulation on Tribological Behaviour of Third-Body Interface with Different Shear Elastic Modulus. Advanced materials research.DOI
192. Wei Wang, Xiaojun Liu, Kun Liu, Jin Shen (2012). Influences of Particle’s Friction Coefficient on Tribological Behaviour of Third-Body Interface. Advanced materials research.DOI
193. Kun Liu (2012). Simulation Analysis on the Effects of Skirt Topography on Mixed Lubricating Characteristics of Piston Skirt. Transactions of Csice.
194. Kun Liu (2012). Frictional Properties of Textured Surfaces under Plane Contact.
195. Kun Liu (2012). Development of a tribometer for friction couple of dense granules and mechanical surface. Journal of Hefei University of Technology.
196. 周洋，刘小君，王伟，刘焜（2011）. 唇式密封圈摩擦特性及泵吸效应的实验研究. 《润滑与密封》.
197. 李见，王伟，刘小君，刘焜（2011）. 缸套表面2D-motif参数对其摩擦学特性的影响. 《合肥工业大学学报(自然科学版)》.
198. 黄红，王伟，刘焜（2011）. 添加纳米金刚石润滑油的摩擦学性能试验研究. 《合肥工业大学学报(自然科学版)》.
199. 李兵，刘焜，王静，胡兆稳，王伟，刘小君（2011）. 线接触滑——滚条件下微凹坑表面摩擦特性. 《机械工程学报》.
200. 王伟，刘小君，刘焜，张洋，查文韬（2011）. 利用摩擦学系统理论对磨粒流加工过程的分析. 《现代制造工程》.
201. Kun Liu (2011). Experimental study of tribological properties of nano-diamond as an additive in lubricating oil. Journal of Hefei University of Technology.
202. Kun Liu (2011). Influence of 2D-motif parameters of cylinder liner on its tribological properties. Journal of Hefei University of Technology.
203. Wei Wang, Xiaojun Liu, Ting Xie, Kun Liu (2011). Effects of Sliding Velocity and Normal Load on Tribological Characteristics in Powder Lubrication. Tribology Letters.DOI
204. Kun Liu (2011). Numerical simulation of frictional process of rough surfaces based on discrete element method. Journal of Hefei University of Technology.
205. Kun Liu (2011). Model for Piston Secondary Motion of Combustion Engine and Simulation of Parameters Design. Jisuanji fangzhen.
206. Kun Liu (2011). A numerical analysis for secondary motion of piston considering thermal deformation and elastic deformation. Journal of Hefei University of Technology.
207. Kun Liu (2011). Influence of laser processed micro-dimples on frictional properties of cylinder liner-piston ring. Transactions of Csice.
208. 万筱怡，刘小君，刘焜（2010）. 基于分水岭算法的3D-motif构造及其对表面形貌的表征. 《润滑与密封》.
209. 王静，刘焜，王伟，胡兆稳（2010）. SVM在缸套—活塞磨损状态监测中的应用研究. 《车用发动机》.
210. Wei Wang, Xiaojun Liu, Kun Liu, Li Hongxian (2010). Experimental Study on the Tribological Properties of Powder Lubrication under Plane Contact. Tribology Transactions.DOI
211. Kun Liu (2010). Study on the interaction of surface topography based on discrete element method. Journal of Hefei University of Technology.
212. 王伟，王静，王光恩，刘焜（2009）. 内燃机摩擦学设计系统主框架的研究. 《车用发动机》.
213. 刘伟，刘小君，王伟，刘焜（2009）. 颗粒对液-固二相润滑摩擦和温度特性影响的试验研究. 《合肥工业大学学报(自然科学版)》.
214. 王伟，刘小君，胡兆稳，刘焜（2009）. 内燃机摩擦学分析系统的框架构建. 《合肥工业大学学报(自然科学版)》.
215. 李红献，王伟，刘焜，席寅虎（2009）. 载荷对面接触摩擦副粉末润滑膜影响的实验研究. 《合肥工业大学学报(自然科学版)》.
216. 王伟，刘小君，刘焜（2009）. 工况对面接触摩擦副粉末润滑膜影响的实验研究. 《2009年全国青年摩擦学学术会议论文集》.
217. Kun Liu (2009). Experimental research on the effect of particles on thermal and frictional properties in liquid-solid lubrication. Journal of Hefei University of Technology.
218. Kun Liu (2009). Study on Main Framework for Engine Tribology Design System. Vehicle Engine.
219. Kun Liu (2009). Influences of Several Slider’s Parameters on Particles Flow Lubrication Characteristics.
220. 李玉龙，刘焜（2008）. 外齿轮润滑泵无困油时齿面润滑状态的研究. 《润滑与密封》.
221. 刘小君，王光恩，王伟，刘焜（2008）. 内燃机摩擦学评估模型的研究进展. 《合肥工业大学学报(自然科学版)》.
222. 王伟，刘焜（2008）. 颗粒流润滑的现状和展望. 《摩擦学学报(中英文)》.DOI
223. 冯嫦杰，刘小君，王伟，刘焜（2008）. 表面相互作用下表面形貌表征研究. 《润滑与密封》.
224. 任俊，刘小君，王伟，刘焜（2008）. 发动机连杆小头轴承的润滑研究. 《合肥工业大学学报(自然科学版)》.
225. Jiajun Wang, Xiaojun Liu, Wei Wang, Kun Liu (2008). Establishment of experimental system and investigation of tribological properties of powder-gas flow lubrication. Nongye gongcheng xuebao.DOI
226. Kun Liu (2008). Research on lubrication of connecting rod small end bearing of engine. Journal of Hefei University of Technology.
227. Kun Liu (2008). Review and Prospect of Particulate Lubrication. Tribology.
228. Kun Liu (2008). Thermal analysis of piston in high-speed gasoline engines. Journal of Hefei University of Technology.
229. 刘伟，刘焜，王伟（2007）. 液-固二相流体润滑的研究及发展. 《合肥工业大学学报(自然科学版)》.
230. 俞建卫，李卫荣，焦明华，马少波，刘焜（2007）. 烧结工艺对PTFE自润滑轴承材料摩擦性能的影响. 《轴承》.
231. 王伟，刘小君，焦明华，李红献，刘焜（2007）. 基于面接触的粉末润滑实验研究. 《润滑与密封》.
232. 俞建卫，倪琲，焦明华，解挺，李卫荣，尹延国，田明，刘焜（2007）. MHK-500环块摩擦磨损试验机智能测控系统的研制. 《润滑与密封》.
233. 焦明华，尹延国，俞建卫，解挺，杜春宽，刘焜（2007）. 镀镍石墨粉与铜基自润滑材料摩擦磨损特性研究. 《摩擦学学报(中英文)》.
234. 焦明华，尹延国，俞建卫，解挺，杜春宽，刘焜，吴玉程（2007）. 石墨表面金属化对铜基复合材料摩擦学性能的影响. 《中国有色金属学报》.
235. 朱永刚，刘小君，王伟，刘焜（2007）. 考虑动压与路面粗糙度时轮胎湿牵引性能研究. 《汽车工程》.
236. Kun Liu (2007). Effects of Sintering Technology on Tribological Properties of PTFE Self-lubrication Bearing Materials. Bearing Jurnal Penelitian dan Kajian Teknik Sipil.
237. Yanhui Zhang, Xiaojun Liu, Wei Wang, Kun Liu (2007). Effects of tire tread pattern on adhesion performance on wet road. Nongye gongcheng xuebao.DOI
238. Kun Liu (2007). Tribological Properties of Cu-matrix/graphite Coated with Nickel Self-lubricating Composites. Tribology.
239. Kun Liu (2007). Study on copper matrix composite containing copper-coated graphite particles. Cailiao rechuli xuebao.
240. Kun Liu (2007). Development of researches on the temperature field of frictional brakes. Journal of Hefei University of Technology.
241. 李玉龙，刘焜（2006）. 基于摩擦学特性相似的关节式曲柄连杆机构研究. 《润滑与密封》.
242. 王伟，焦明华，刘焜（2006）. 固相特性对液-固二相热流体润滑的影响研究. 《2006全国摩擦学学术会议论文集（一）》.
243. 刘伟，焦明华，王伟，刘焜（2006）. 颗粒分布对润滑油膜压力影响的研究. 《2006全国摩擦学学术会议论文集（一）》.
244. 刘焜，王伟，张斌，焦明华（2006）. 耦合颗粒形态和粗糙表面影响的摩擦副热效应. 《合肥工业大学学报(自然科学版)》.
245. 尹延国，焦明华，解挺，郑治祥，刘焜，俞建卫，田明（2006）. 滑动轴承材料的研究进展. 《润滑与密封》.
246. 王伟，刘焜，张寰，焦明华（2006）. 颗粒含量对液固二相流体润滑特性影响的试验研究. 《润滑与密封》.
247. 李玉龙，刘焜（2006）. 齿轮传动基于摩擦学性能的效率最佳化研究. 《润滑与密封》.
248. 尹延国，杜春宽，郑治祥，解挺，刘焜，吴玉程（2006）. 镀镍石墨粉对铜基石墨复合材料力学性能的影响. 《中国有色金属学报》.
249. 尹延国，焦明华，俞建卫，马少波，解挺，刘焜，郑治祥（2006）. 铁基粉末冶金含油材料摩擦学性能. 《金属功能材料》.
250. Wei Wang, Kun Liu, Minghua Jiao (2006). Thermal and non-Newtonian analysis on mixed liquid–solid lubrication. Tribology International.DOI
251. Xiaojun Liu, Yi Huang, Kun Liu, Changlin Gui (2006). Multiscale features analysis of 3D surface topography based on mathematical morphology. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
252. Kun Liu (2006). Friction Theory of Rubber Tire and Development of its Valuation. Special Purpose Rubber Products.
253. 张斌，刘焜，焦明华，王伟（2005）. 液固二相流体润滑状态下的热效应分析. 《合肥工业大学学报(自然科学版)》.
254. 刘焜，焦明华（2005）. 机械产品创新与摩擦学设计. 《合肥工业大学学报(自然科学版)》.
255. 尹延国，刘君武，郑治祥，郑玉春，刘焜，解挺（2005）. 石墨对铜基自润滑材料高温摩擦磨损性能的影响. 《摩擦学学报(中英文)》.
256. 王伟，刘焜，焦明华，刘小君（2005）. 活塞环-缸套液固二相润滑研究. 《内燃机学报》.
257. 尹延国，郑治祥，马少波，刘焜（2004）. 温度对铜基自润滑材料减摩耐磨特性的影响. 《中国有色金属学报》.
258. 刘焜，张斌，王伟，焦明华（2004）. 液-固二相流体润滑下缸套-活塞环擦伤特性的研究. 《第二届全国工业摩擦学大会暨第七届全国青年摩擦学学术会议》.
259. 刘焜，王超，汪俊（2002）. 液固二相流体润滑状态下表面形貌特性的变化. 《安徽工业大学学报(自然科学版)》.
260. 刘小君，刘焜（2000）. 缸套表面形貌磨损特性的研究. 《机械科学与技术》.
261. 刘焜，桂长林，袁万贵，林茂禄（1999）. 活塞环-缸套擦伤的实验研究. 《第五届全国青年摩擦学学术会议》.
262. 刘小君，刘焜，赵小勇（1999）. 耦合波度和粗糙度的表面形貌特性的研究. 《第五届全国青年摩擦学学术会议论文集》.
263. 刘焜，刘小君，王虎（1999）. 缸套表面形貌磨合特性及润滑能力的研究. 《第五届全国青年摩擦学学术会议论文集》.
264. 刘焜，刘小君，桂长林（1997）. 粗糙表面接触模型及其在活塞环—缸套中的应用. 《第六届全国摩擦学学术会议》.
265. 刘焜，桂长林（1997）. 活塞系统的二阶运动及其对活塞环—缸套润滑特性的影响. 《合肥工业大学学报(自然科学版)》.
266. 刘焜，谢友柏（1995）. 内燃机气缸套—活塞环表面流量因子的确定及混合润滑分析. 《内燃机工程》.
267. 桂长林，赵子晕，刘焜（1993）. 柴油机活塞环组-缸套润滑状态和摩擦功耗的分析方法和应用(英文). 《合肥工业大学学报(自然科学版)》.

书籍章节

1. Xiaojun Liu, Wei Wang, Kun Liu, Gui Chang-lin (2009). Connectivity Characterization of 3D Surface Topography Based on Mathematical Morphology. Springer eBooks.DOI