张炯明

期刊论文

1. 吴迪，张佳正，张炯明，尹延斌（2026）. 200 mm×800 mm小断面板坯高拉速连铸结晶器流场与浸入式水口优化的模拟研究. 《炼钢》.
2. 冯林峰，高福彬，尹延斌，张炯明（2026）. 结晶器电磁搅拌参数对165 mm小方坯表层大颗粒夹杂物控制研究. 《江西冶金》.
3. Guo-Liang Wu, Yan-Bin Yin, Jiong-Ming Zhang, Qiang Liu (2026). Experimental investigation on the formation of large size inclusions in GCr15 high-carbon bearing steel. Canadian metallurgical quarterly.DOI
4. Mingyu Zhu, Yan Guo, Zhen-Yu Liu, Jia-Zhen Zhang, Yan-Bin Yin, Jiong-Ming Zhang (2026). Investigation on multiphase flow behaviour and formation of slag eyes in a five-strand billet continuous casting tundish. Ironmaking & Steelmaking: Processes, Products and Applications.DOI
5. Guo-Liang Wu, Yan-Bin Yin, Jiong-Ming Zhang, Qiang Liu (2026). Effect of refining slag basicity on removal of large size inclusions in GCr15 bearing steel. Metallurgical Research & Technology.DOI
6. Xing-Xing Wu, Yan-Bin Yin, Jiong-Ming Zhang (2026). Physical Modeling on Vibration Behavior of Converter With High Bottom‐Blowing Flow Rate. Steel Research International.DOI
7. Zhen-Yu Liu, Yi-Long Zhao, Yan-Bin Yin, Jiong-Ming Zhang, Guo-Liang Wu (2026). Numerical Simulation Study on Steel Grade Transition in a Two-Strand Slab Tundish. Metallurgical and Materials Transactions B.DOI
8. Guo-Liang Wu, Yan-Bin Yin, Jiong-Ming Zhang, Qiang Liu, Fu-Bin Gao (2026). Effect of inclusion collision, refractory erosion, reoxidation and slag entrainment on large size inclusions in low-carbon aluminum-killed steel. Metallurgical Research & Technology.DOI
9. Mingyu Zhu, Hai-Tao Ma, Wei Yang, Yan-Bin Yin, Jiong-Ming Zhang (2026). Secondary cooling dynamic control and internal quality optimization of SWRH82B continuous casting billet based on precise control of solidification structure. Journal of Materials Research and Technology.DOI
10. Zhen-Yu Liu, Mingyang Feng, Yan-Bin Yin, Jiong-Ming Zhang, Qiang Liu, Fu-Bin Gao (2026). Research on flow field optimization and industrial application of a seven-strand billet tundish with dual nozzles. Metallurgical Research & Technology.DOI
11. Wei Yang, Mingyu Zhu, Yan-Bin Yin, Jiong-Ming Zhang (2026). Influence of asymmetric flow rate ratio of dual ladle shrouds on flow, heat transfer, and inclusion transport in a billet continuous casting tundish with seven-strand. Metallurgical Research & Technology.DOI
12. Yu Wang, Yan-Bin Yin, Jiong-Ming Zhang, Hai-Tao Ma, Fu-Bin Gao (2026). A lead tracer method for accurate determination of the solidification end in billet continuous casting. Metallurgical Research & Technology.DOI
13. Xing-Xing Wu, Yan-Bin Yin, Jiong-Ming Zhang (2026). Investigation of Three-Phase Electrode Position Behavior and Arc Length Characteristics in a 120 t Ladle Furnace. Metallurgical and Materials Transactions B.DOI
14. Zhen-Yu Liu, Yan Guo, Yan-Bin Yin, Jiong-Ming Zhang, Fu-Bin Gao (2026). Numerical Simulation and Composition Prediction of Steel Grade Transition for Five‐Strand Billet in the Full Continuous Casting Process. Steel Research International.DOI
15. 赵一龙，张炯明，尹延斌，刘振宇，吴国良（2025）. 板坯连铸结晶器混浇模拟研究. 《江西冶金》.DOI
16. 简龙，付薇，吕代鹏，辛鑫，张佳正，张炯明（2025）. 低合金钢热轧卷边部纵向裂纹的形成机理及控制措施. 《第十五届中国钢铁年会论文集—7.轧制与热处理》.DOI
17. 史超宇，尹延斌，张炯明（2025）. 五流中间包异钢种连浇过程物理模拟. 《河北冶金》.DOI
18. 谭振军，马海涛，张炯明，刘华阳（2025）. 70#高碳钢铸坯内部质量优化试验研究. 《鞍钢技术》.
19. 张佳朗，刘强，张佳正，尹延斌，张炯明（2025）. 30MnSi棒材中非金属夹杂物的多维表征. 《中国冶金》.DOI
20. 郭岩，吴国良，尹延斌，张炯明（2025）. 三流板坯对称中间包流场优化的数值模拟. 《河北冶金》.DOI
21. 邹仕宝，张炯明，尹延斌，甄新刚，吴星星（2025）. 基于RF-SSA-BP神经网络的LF终点温度预测. 《冶金能源》.
22. Qiang Liu, Wei Wang, Mingwang Gao, Yan-Bin Yin, Jiong-Ming Zhang (2025). Slag rim structure and phase formation mechanism in molds during the continuous casting of high-Mn high-Al steel. Ceramics International.DOI
23. Yuanyuan Li, Jia-Zhen Zhang, Hai-Tao Ma, Yan-Bin Yin, Jiong-Ming Zhang (2025). Study on the sensitivity of the internal cracks induced by mechanical reduction of different steel grades. Ironmaking & Steelmaking: Processes, Products and Applications.DOI
24. Jia-Zhen Zhang, Yan-Bin Yin, Jiong-Ming Zhang, Wei Song, Qing-Hai Zhou (2025). Improvement of solidification structure and stress distribution of large section Fe-6.5% Si alloy ingot using weak cooling method. International Journal of Cast Metals Research.DOI
25. Jiazheng Zhang, Jiazheng Zhang, Yanbin Yin, Qinghai Zhou, Xingang Zhen, Jiongming Zhang, Jiongming Zhang (2025). Effect of polarisation on surface longitudinal cracks of hypo-peritectic steel in non-sinusoidal oscillation. Ironmaking & Steelmaking Processes Products and Applications.DOI
26. Jiazheng Zhang, Jiongming Zhang, Jiongming Zhang, Jiongming Zhang (2025). Finite Element Simulation of Edge and Crack Evolution in Thin Slab Rolling Process. ˜The œminerals, metals & materials series.DOI
27. 刘颂，张振，赵军，张炯明，张琳琛，刘小杰，李福民，吕庆（2024）. 基于Unet网络的烧结混合料粒度检测模型. 《烧结球团》.
28. 闫晟昌，甄新刚，张炯明，尹延斌，雷星（2024）. 结晶器电磁搅拌对475 mm特厚板坯表层大颗粒夹杂物控制研究. 《江西冶金》.
29. 宋健，甄新刚，张炯明，尹延斌，吴星星，邹仕宝（2024）. 不同脱硫钢的钢包炉精炼工艺优化. 《江西冶金》.
30. 郭岩，尹延斌，张炯明，刘强（2024）. 70#钢热轧盘条拉拔断裂的原因分析. 《江西冶金》.
31. 封明阳，尹延斌，张炯明，史超宇（2024）. 双长水口七流中间包结构优化的数值物理模拟. 《江西冶金》.
32. Jian Song, Jiong-Ming Zhang, Yan-bin Yin, Xin-Gang Zhen (2024). Optimizing power-saving process for a 120-t ladle furnace. Journal of Iron and Steel Research International.DOI
33. Qiang Liu, Xiang Li, Shen Du, Mingwang Gao, Yan-Bin Yin, Jiong-Ming Zhang (2024). Investigation of bubbles escape behavior from low basicity mold flux for high-Mn high-Al steels using 3D X-ray microscope. International Journal of Minerals, Metallurgy, and Materials.DOI
34. Yuanyuan Li, Qing-Hai Zhou, Jiong-Ming Zhang, Yan-Bin Yin (2024). Effect of insulation board thickness on shrinkage and solidification microstructure during ingot casting steel. International Journal of Cast Metals Research.DOI
35. Qiang Liu, Wei Wang, Mingwang Gao, Shen Du, Yan-Bin Yin, Jiong-Ming Zhang (2024). Effect of CaO/SiO2 and Al2O3/SiO2 Mass Ratios on Structure and Viscosity of Mold Flux for Continuous Casting High‐Mn High‐Al Steel. Steel Research International.DOI
36. Jian Song, Jiong-Ming Zhang, Yan-Bin Yin, Hua-Yang Liu, Xin-Gang Zhen (2024). Effect of Argon Flow Rate on Power Consumption of a 120‐t Ladle Furnace. Steel Research International.DOI
37. Xin-Gang Zhen, Shiheng Peng, Jiong-Ming Zhang (2024). Influence of Submerged Entry Nozzles on Fluid Flow, Slag Entrainment, and Solidification in Slab Continuous Casting. Metals.DOI
38. Xin-Gang Zhen, Jiong-Ming Zhang, Yan-Bin Yin (2024). Numerical study on inclusion collision, coalescence and removal in an extra-thick slab continuous casting mold with M-EMS. Metallurgical Research & Technology.DOI
39. 任承然，周青海，尹延斌，张炯明（2023）. E36-T钢高温力学性能与角部横裂纹控制研究. 《钢铁研究学报》.
40. 雷星，甄新刚，张炯明，闫晟昌（2023）. 475 mm特厚板坯连铸结晶器浸入式水口优化数值模拟研究. 《江西冶金》.
41. 李源源，张炯明，崔衡，尹延斌，邓深，杨剑洪（2023）. IF钢连铸开浇工艺对头坯洁净度影响的研究. 《工程科学学报》.
42. 王权，张炯明，马海涛，尹延斌（2023）. 160 mm×160 mm轴承钢连铸小方坯轻压下工艺优化. 《钢铁研究学报》.
43. 陈阳，王芳，魏民，张炯明，李富帅，陈志凌，李秀杰，王学思（2023）. 高拉速板坯连铸技术研究现状. 《铸造技术》.
44. 张炯明（2023）. 连铸过程数值模拟研究. 《冶金工业出版社》.
45. Yan-Bin Yin, Jianhong Yang, Jiong-Ming Zhang, Lei Tang (2023). Physical Modeling of Slag Carryover in the Last Stage of Ladle Teeming during Continuous Casting with Dynamic Change of Slide Gate Opening. Journal of Materials Research and Technology.DOI
46. Qiang Liu, Zhong-Hua Zhan, Ming Gao, Lidong Xing, Yan-Bin Yin, Jiong-Ming Zhang (2023). Investigation of Evolution of Inclusions in 15-5PH Stainless Steel During Hot Compression Using 3D X-Ray Microscopy. Metallurgical and Materials Transactions B.DOI
47. Yan-Bin Yin, Jiong-Ming Zhang (2023). Finite Element Analysis on Inclusion Migration during Hot-Rolling Process of Ultralow Carbon Steel. Processes.DOI
48. Song Liu, Zhen Zhang, Jun Zhao, Xiaojie Liu, Jiong-Ming Zhang, Ran Liu, Fumin Li, Qing Lyu (2023). Research and application of the sintering whole process intelligent manufacturing system. Ironmaking & Steelmaking.DOI
49. Yan-Bin Yin, Jiong-Ming Zhang, Peng-Cheng Xiao (2023). Mathematical Modeling on Optimization of Submerged Entry Nozzle for an Ultra-Thick Slab Continuous Casting Mold. Metals.DOI
50. 赵新凯，田凤喜，高文娟，张迎涛，毛福来，张炯明（2022）. 轴承钢连铸过程中非金属夹杂物群迁移行为的分析. 《连铸》.
51. 卢文利，尹延斌，张炯明，封明阳（2022）. 150t钢包双孔底吹的水模型研究. 《江西冶金》.
52. 赵新凯，石永生，刘世义，王德龙，张炯明（2022）. GCr15轴承钢精炼渣对夹杂物祛除行为的研究. 《特殊钢》.
53. Zhao-Zhao Yan, Jiong-Ming Zhang, Yan-Bin Yin, Hai-Tao Ma, Hua-Yang Liu, Xing-Xing Wu (2022). Effect of steel rod embedded in electrode on continuous consumption of graphite by using numerical simulation. Ironmaking & Steelmaking.DOI
54. Qing-Hai Zhou, Yan-Bin Yin, Zhiming Liu, Jiong-Ming Zhang, Jia-Zhen Zhang (2022). Research Mechanism of Formation on Transverse Corner Cracks in the Continuous Casting Slab of Peritectic Steel. Steel Research International.DOI
55. Zhao-Zhao Yan, Jiong-Ming Zhang, Qiang Liu, Yan-Bin Yin, Hai-Tao Ma, Hua-Yang Liu (2022). Simulation study of the effect of electrode embedded with magnesia-carbon material on the breakdown process in micro-gap and electric field in arc. Physica Scripta.DOI
56. Qing-Hai Zhou, Yan-Bin Yin, Jiong-Ming Zhang (2022). Numerical Simulation Research and Application of Convex Roll for Efficient Soft Reduction of Continuous Casting Slab. Metallurgical and Materials Transactions B.DOI
57. Hai-Tao Ma, Jiong-Ming Zhang, Yan-Bin Yin, Zhao-Zhao Yan, Hua-Yang Liu (2022). Numerical simulation on the centre macrosegregation during Billet continuous casting with the soft reduction. Ironmaking & Steelmaking.DOI
58. Zhao-Zhao Yan, Jiong-Ming Zhang, Yan-Bin Yin, Hua-Yang Liu, Xing-Xing Wu, Jia-Zhen Zhang (2022). Simulation Study on the Influence of Magnesia-Carbon Material Embedded in Electrode on the Current Distribution and Temperature Distribution. Steel Properties & Applications in conjunction with Materials Science & Technology 2022.DOI
59. Zhaozhao Yan, Jiongming Zhang, Yanbin Yin, Haitao Ma, Huayang Liu, Xingxing Wu (2022). Numerical simulation study on the effect of electrode embedded with magnesia-carbon material on DC arc characteristics. Metallurgical Research & Technology.DOI
60. 张炯明，周青海，尹延斌，吴星星，刘华阳（2021）. 连铸板坯三维二冷动态配水与精准压下研究与应用. 《工程科学学报》.DOI
61. 马海涛，张炯明，尹延斌（2021）. 压下对重轨钢大方坯内裂纹敏感性的影响. 《工程科学学报》.DOI
62. R. Cheng, Liang-Jin Zhang, Yan-Bin Yin, Jiong-Ming Zhang (2021). Effect of Side Blowing on Fluid Flow and Mixing Phenomenon in Gas-Stirred Ladle. Metals.DOI
63. Yan-Bin Yin, Jiong-Ming Zhang, Hai-Tao Ma, Qing-Hai Zhou (2021). Large Eddy Simulation of Transient Flow, Particle Transport, and Entrapment in Slab Mold with Double‐Ruler Electromagnetic Braking. Steel Research International.DOI
64. Yan-Bin Yin, Jiong-Ming Zhang (2021). Large eddy simulation of transient transport and entrapment of particle during slab continuous casting. Journal of Iron and Steel Research International.DOI
65. Min-Min Sun, Jiong-Ming Zhang, Lijun Zhang, Kai-Lang Li (2021). Investigation of the microstructure interaction mechanism of coke–slag–metal in deadman of blast furnace.DOI
66. Qi-Peng Dong, Jiong-Ming Zhang, Yan-Bin Yin, Hiromi Nagaumi (2021). Numerical simulation of macrosegregation in billet continuous casting influenced by electromagnetic stirring. Journal of Iron and Steel Research International.DOI
67. Yan-Bin Yin, Jiong-Ming Zhang (2021). Mathematical Modeling on Transient Multiphase Flow and Slag Entrainment in Continuously Casting Mold with Double-ruler EMBr through LES+VOF+DPM Method.DOI
68. R. Cheng, Liang-Jin Zhang, Yan-Bin Yin, Hai-Tao Ma, Jiong-Ming Zhang (2021). Influence of Argon Gas Flow Parameters in the Slot Plug on the Flow Behavior of Molten Steel in a Gas-Stirred Ladle. Transactions of the Indian Institute of Metals.DOI
69. 李岩，张炯明，尹延斌（2020）. IF钢连铸坯及热轧板夹杂物研究. 《有色金属科学与工程》.DOI
70. 申焰杰，张炯明，尹延斌（2020）. IF热轧板夹杂物研究. 《江西冶金》.DOI
71. 毛晓亮，郭银涛，武学强，程荣，张炯明（2020）. 钢包水模型波动性卷渣和混匀的模拟分析. 《江西冶金》.DOI
72. 赵建辉，张炯明，尹延斌，王顺玺（2019）. Q235B板坯夹杂物研究. 《连铸》.DOI
73. 董志成，张炯明，马海涛（2019）. 小方坯碳偏析模拟研究. 《有色金属科学与工程》.DOI
74. 吴星星，黄雪驰，李宝宽，张炯明（2019）. 三相电极电渣重熔过程温度场与流场研究. 《江西冶金》.
75. R. Cheng, Jiong-Ming Zhang, Liang-Jin Zhang, Hai-Tao Ma (2019). Behavior of porosity in billet during rolling process of rail. Metallurgical Research and Technology.DOI
76. Yan-Bin Yin, Jiong-Ming Zhang, Bo Wang, Qi-Peng Dong (2019). Effect of in-mould electromagnetic stirring on the flow, initial solidification and level fluctuation in a slab mould: a numerical simulation study.DOI
77. R. Cheng, Jiong-Ming Zhang, Liang-Jin Zhang, Hai-Tao Ma (2019). Application of Offgas Analysis on Predicting Carbon Content at End Point During Steelmaking Process. 10th International Symposium on High-Temperature Metallurgical Processing.DOI
78. Qing-Hai Zhou, Jiong-Ming Zhang, Yan-Bin Yin (2019). Analysis of Large Inclusions in Crankshaft Steel by Ingot Casting. Materials Processing Fundamentals 2019.DOI
79. Qing-Hai Zhou, Jiong-Ming Zhang, Yan-Bin Yin, M. Zhai (2019). Characterization of inclusions in axle steel by ingot casting. Metallurgical Research and Technology.DOI
80. Hai-Tao Ma, Jiong-Ming Zhang, R. Cheng, Shun-Xi Wang (2019). Numerical Simulation Study on Quality Control of the Center Macroscopic Segregation in the Continuous Casting Slab. Transactions of the Indian Institute of Metals.DOI
81. R. Cheng, Jiong-Ming Zhang, Liang-Jin Zhang, Hai-Tao Ma (2019). Comparison of porosity alleviation with the multi-roll and single-roll reduction modes during continuous casting. Journal of Materials Processing Technology.DOI
82. 汤磊，张炯明，翟明智（2018）. 连铸板坯轧制过程缩孔闭合行为的数值模拟. 《炼钢》.
83. 翟明智，张炯明，尹延斌，韩金昊（2018）. 模铸42CrMoA曲轴钢夹杂物分析. 《炼钢》.
84. 汤磊，张炯明，董其鹏，韩立磊（2018）. 板坯连铸结晶器内部流场的数值模拟. 《工业加热》.
85. 翟明智，张炯明，尹延斌（2018）. 模铸车轴钢大型夹杂物分析. 《2018年（第二十届）全国炼钢学术会议大会报告及论文摘要集》.
86. 陶林，宋炜，张炯明（2018）. HRB400轧制过程中再结晶行为模拟研究. 《铸造技术》.
87. 张金鑫，李宏，张炯明，程荣（2018）. MTA废气分析在VOD脱碳过程中的应用. 《中国冶金》.
88. R. Cheng, Jiong-Ming Zhang, Bo Wang (2018). Closure behavior of spherical void in slab during hot rolling process.DOI
89. R. Cheng, Jiong-Ming Zhang, Bo Wang (2018). Formation Mechanism of Voids around Hard Inclusion during Hot Rolling Processes. High Temperature Materials and Processes.DOI
90. Yan-Bin Yin, Jiong-Ming Zhang, Shao-Wu Lei, Zhi-Tong Wang (2018). Numerical Simulation of Inclusion Capture in the Slab Continuous Casting Considering the Influence of the Primary Dendrite Arm Spacing.DOI
91. Yan-Bin Yin, Jiong-Ming Zhang, Qi-Peng Dong, Qing-Hai Zhou (2018). Mathematical modelling of inclusion motion and entrapment in billet mould with effect of electromagnetic stirring. Ironmaking & steelmaking.DOI
92. Yan-Bin Yin, Jiong-Ming Zhang, Qi-Peng Dong, Yuan-Yuan Li (2018). Modelling on Inclusion Motion and Entrapment during the Full Solidification in Curved Billet Caster.DOI
93. Shun-Xi Wang, Jiong-Ming Zhang, R. Cheng, Hai-Tao Ma (2018). Numerical Simulation of Inclusion Modification During Calcium Treatment Process in Ladle. Transactions of the Indian Institute of Metals.DOI
94. R. Cheng, Jiong-Ming Zhang, Bo Wang (2018). Deformation Behavior of Inclusion System CaO–Al2O3–SiO2 with Different Compositions During Hot Rolling Processes. Transactions of the Indian Institute of Metals.DOI
95. 曹雅林，张炯明，宋炜，刘志明（2017）. 高强钢板坯二冷三维动态配水的在线控制. 《连铸》.
96. 李博，张炯明，王博，尹延斌，董其鹏（2017）. 重压下含铌钛连铸坯碳氮化物析出行为的研究. 《连铸》.
97. 张炯明（2017）. 板坯三维动态配水及可控轻压下技术. 《炼钢-连铸过程智能制造技术专题高级研讨会》.
98. 韩金昊，张炯明，尹延斌（2017）. 钢中典型气泡理化特征的基础研究. 《炼钢》.
99. 宋炜，张炯明，王顺玺（2017）. 基于实验与3D—CAFE法的高硅钢铸锭凝固行为. 《工程科学学报》.
100. Qi-Peng Dong, Jiong-Ming Zhang, Xin-Kai Zhao (2017). Prediction of columnar-to-equiaxed transition and porosity in continuous cast billet.DOI
101. Yan-Bin Yin, Jiong-Ming Zhang, J. Han, M. Zhai (2017). Experimental Investigation on Inclusions in Hot Rolled Axle Steel by the Mold Casting.DOI
102. Qi-Peng Dong, Jiong-Ming Zhang, Qiang Liu, Yan-Bin Yin (2017). Magnetohydrodynamic Calculation for Electromagnetic Stirring Coupling Fluid Flow and Solidification in Continuously Cast Billets.DOI
103. R. Cheng, Jiong-Ming Zhang, Bo Wang (2017). Deformation behavior of MnO13%-Al2O318%-SiO269% inclusion in different steels during hot rolling processes.DOI
104. Yan-Bin Yin, Jiong-Ming Zhang, Shao-Wu Lei, Qi-Peng Dong (2017). Numerical Study on the Capture of Large Inclusion in Slab Continuous Casting with the Effect of In-mold Electromagnetic Stirring.DOI
105. Qi-Peng Dong, Jiong-Ming Zhang, Yan-Bin Yin, Bo Wang (2017). Three-Dimensional Numerical Modeling of Macrosegregation in Continuously Cast Billets.DOI
106. Qi-Peng Dong, Jiong-Ming Zhang, Liang Qian, Yan-Bin Yin (2017). Numerical Modeling of Macrosegregation in Round Billet with Different Microsegregation Models.DOI
107. 温鑫，张炯明，王博，董其鹏，尹彦斌，韩立磊，王志通（2016）. 电磁搅拌和轻压下对铸坯内部质量的影响及研究. 《第十九届（2016年）全国炼钢学术会议》.
108. 韩立磊，张炯明，宋玮，王顺玺，董其鹏，王志通，温鑫（2016）. 不同浇铸阶段IF钢连铸板坯表层洁净度研究. 《第十九届（2016年）全国炼钢学术会议大会报告及论文摘要集》.
109. 王志通，张炯明，王博，尹延斌，董其鹏，王顺玺，宋炜，韩立磊，温鑫（2016）. 螺纹钢耐锈蚀性能措施的研究. 《第十九届（2016年）全国炼钢学术会议大会报告及论文摘要集》.
110. 刘亮，张炯明，王伟（2016）. 含钛不锈钢精炼连铸中钛含量变化影响因素分析. 《铸造技术》.
111. 王博，张炯明，肖超，王顺玺，宋炜（2016）. 连铸板坯轻压下过程中间裂纹产生机理. 《工程科学学报》.
112. Wei-Li Song, Jiong-Ming Zhang, Shun-Xi Wang, Bo Wang, Li-Lei Han (2016). Simulation of solidification microstructure of Fe-6.5%Si alloy using cellular automaton-finite element method. Journal of Central South University.DOI
113. 王顺玺，张炯明，宋炜，王博，白敦敏（2016）. 钢包钙处理工艺中钙汽化过程的数值模拟. 《中南大学学报(自然科学版)》.
114. 曹一飞，张炯明，王博（2016）. 小方坯结晶器锥度优化. 《工程科学学报》.
115. 刘强，张炯明，王博，尹延斌，曹一飞（2016）. HRB400螺纹钢中钒的强化作用研究. 《工程科学学报》.
116. Yan-Bin Yin, Jiong-Ming Zhang, Shao-Wu Lei, Shun-Xi Wang, Qi-Peng Dong (2016). NUMERICAL SIMULATION OF INCLUSION AGGREGATION AND REMOVAL IN A BOTTOM GAS-INJECTED LADLE DURING MOLTEN STEEL DEOXIDATION.
117. Qi-Peng Dong, Jiong-Ming Zhang, Bo Wang, Xin-Kai Zhao (2016). Shrinkage porosity and its alleviation by heavy reduction in continuously cast strand.DOI
118. Bo Wang, Jiong-Ming Zhang, Yan-Bin Yin, Qi-Peng Dong, Chao-Ping Xiao (2016). Study on the reduction efficiency of soft reduction on continuous casting bloom.DOI
119. Qi-Peng Dong, Jiong-Ming Zhang (2016). Simulation of Fluid Flow and Heat Transfer in Plasma Arc Region of AC Electric Arc Furnace.DOI
120. Wei Song, Jiong-Ming Zhang, Shun-Xi Wang, Bo Wang, Li-Lei Han（2016）. セルラオートマトン‐有限要素法を用いたFe‐6.5%Si合金の凝固ミクロ組織のシミュレーション【Powered by NICT】.
121. Bo Wang, Jiong-Ming Zhang, Chao-Ping Xiao, Shun-Xi Wang, Wei-Li Song (2016). Analysis of Internal Cracks in Continuous Casting Slabs with Soft Reduction.DOI
122. Shao-Wu Lei, Jiong-Ming Zhang, Xin-Kai Zhao, Qi-Peng Dong (2016). Study of Molten Steel Flow and Inclusions Motion Behavior in the Solidification Processes for High Speed Continuous Casting Slab by Numerical Simulation. Transactions of the Indian Institute of Metals.DOI
123. 董其鹏，张炯明，赵新凯，王博（2015）. 板坯凝固末端重压下的模拟研究. 《“第十届中国钢铁年会”暨“第六届宝钢学术年会”;第十届中国钢铁年会暨第六届宝钢学术年会》.
124. 王坤，张炯明，王猛，王立峰（2015）. 超低碳钢热轧盘条表面环形粗晶组织及控制措施. 《上海金属》.
125. 王坤，张炯明，王立峰，王猛，罗衍昭（2015）. 超低碳钢铸坯皮下气泡缺陷产生原因分析及控制措施. 《上海金属》.
126. 雷少武，张炯明，董其鹏，苌真真（2015）. EMS对板坯表层气泡分布的影响研究. 《炼钢》.
127. 潘贻芳，李树庆，侯葵，赵新凯，张炯明，王博（2015）. 小方坯流程高品质轴承钢工艺. 《中国冶金》.
128. Shao-Wu Lei, Jiong-Ming Zhang, Xin-Kai Zhao, Qi-Peng Dong (2015). STUDY OF THE FACTORS INFLUENCING MICROSTRUCTURE TRANSFORMATION IN THE BILLET CASTING PROCESS.DOI
129. Bo Wang, Jiong-Ming Zhang, Chao-Ping Xiao, Wei-Li Song, Shun-Xi Wang (2015). Analysis of the evolution behavior of voids during the hot rolling process of medium plates.DOI
130. Wei Song, Jiong-Ming Zhang, Yingli Liu, Shun-Xi Wang, Bo Wang (2015). Numerical simulation of solidification structure of 6.5 wt-%Si steel ingot slab.DOI
131. Bo Wang, Jiong-Ming Zhang, Yanzhao Luo, Shun-Xi Wang, Wei-Li Song (2015). Research on the Evolution Behavior of Surface Transverse Cracks During the Hot Rolling Process of Medium Plates. Metallography Microstructure and Analysis.DOI
132. Tao Wang, Jiong-Ming Zhang, Xin-Kai Zhao（2014）. 150 mm×150 mm方坯连铸机末端电磁搅拌及拉速对铸坯内部质量的影响.DOI
133. 潘贻芳，吴波，李秉一，王博，张炯明，赵新凯（2014）. 帘线钢精炼与连铸过程中夹杂物的研究. 《炼钢》.
134. 刘亮，张炯明，杜晓建，孙仁宝，柴国明（2014）. 氢含量对304不锈钢连铸过程中传热的影响. 《铸造技术》.
135. 李茂康，张炯明，罗衍昭，宋炜，宋高阳（2014）. 利用还原钙渣配制高碱度低硅无碳中间包覆盖剂. 《钢铁研究学报》.
136. 陈阳，张炯明（2014）. 板坯连铸中间包内夹杂物去除的数值模拟. 《钢铁研究》.
137. 刘义，张炯明，宋炜，苌真真（2014）. 6.5%Si高硅钢铸锭凝固组织的CAFE法模拟研究. 《功能材料》.
138. 丛林，张炯明，雷少武，李茂康（2014）. 中间包感应加热的数值模拟. 《钢铁研究》.
139. 符豪，张炯明，赵新凯，肖超（2014）. 小方坯连铸结晶器内热力行为研究. 《河南冶金》.
140. Xin-Kai Zhao, Jiong-Ming Zhang, Shao-Wu Lei, Yuanning Wang (2014). Dynamic Recrystallization (DRX) Analysis of Heavy Reduction Process with Extra‐Thickness Slabs.DOI
141. Yanzhao Luo, Jiong-Ming Zhang, Qiang Liu, Mao-kang Li, Yi-tong Han, Yi Cao (2014). Evolution of Surface Transversal Crack in Intermediate Slabs during Hot Rolling Deformation.DOI
142. Shao-Wu Lei, Jiong-Ming Zhang, Xin-Kai Zhao, Kaifeng He (2014). Numerical Simulation of Molten Steel Flow and Inclusions Motion Behavior in the Solidification Processes for Continuous Casting Slab.DOI
143. Jiong-Ming Zhang, Liang Liu, Xin-Yu Zhao, Shao-Wu Lei, Qi-Peng Dong (2014). Mathematical Model for Decarburization Process in RH Refining Process.DOI
144. F. Yuan, Xing-Hua Wang, Jiong-Ming Zhang, Li Zhang (2014). Numerical Simulation of Influence of Argon Flowrate on Tundish Nozzle Clogging during Continuous Casting.
145. Xin-Kai Zhao, Jiong-Ming Zhang, Shao-Wu Lei, Yuanning Wang (2014). Finite‐Element Analysis of Porosity Closure by Heavy Reduction Process Combined with Ultra‐Heavy Plates Rolling.DOI
146. Xin-Kai Zhao, Jiong-Ming Zhang, Shao-Wu Lei, Yuanning Wang (2014). The Position Study of Heavy Reduction Process for Improving Centerline Segregation or Porosity With Extra‐Thickness Slabs.DOI
147. Jiong-Ming Zhang, Wei Song, Yi Liu (2014). A vacuum distillation method and apparatus for extracting ferromanganese manganese metal.
148. 赵新凯，李旭，王元宁，张炯明（2013）. 特厚板用连铸坯凝固末端大压下有限元分析. 《第九届中国钢铁年会论文集》.
149. 王海宝，张炯明，赵新宇，刘洋，王文军，甄新刚（2013）. 冷却模式对铸坯表面组织的影响. 《钢铁》.
150. 刘志明，张炯明（2013）. 微合金钢连铸坯热送热装析出物的研究. 《炼钢》.
151. 吴炼，张炯明，刘志明，魏小东，罗衍昭，肖超（2013）. 小方坯连铸末端电磁搅拌综合控制模型. 《钢铁研究学报》.
152. 陈阳，张炯明（2013）. 近终形异形坯/大方坯复合型连铸机设计特点. 《炼钢》.
153. 职建军，胡会军，阮晓明，张炯明，胡招凡（2013）. 电磁搅拌对IF钢连铸坯纯净度的影响. 《第九届中国钢铁年会论文集》.
154. Jiong-Ming Zhang, Yanzhao Luo, Chao-Ping Xiao, Shun-Xi Wang, Wei Song, Mao Li, Xin-Kai Zhao, Bo Wang (2013). Method for producing 60 mm extra-thick steel plates with low compression ratio.
155. Jiongming Zhang (2013). Study on precipitation of micro-alloyed steel slab in process of hot-charging. Steelmaking.
156. Chao-Ping Xiao, Jiong-Ming Zhang, Yanzhao Luo, Lian Wu, Shun-Xi Wang (2013). Optimization investigation on the soft reduction parameters of medium carbon microalloy steel.DOI
157. Chao-Ping Xiao, Jiong-Ming Zhang, Yanzhao Luo, Xiao-dong Wei, Lian Wu, Shun-Xi Wang (2013). Control of Macrosegregation Behavior by Applying Final Electromagnetic Stirring for Continuously Cast High Carbon Steel Billet.DOI
158. 苑阳阳，张炯明，肖超，胡招凡，陈少东（2012）. 49MnVS3非调质钢连铸方坯中心裂纹分析. 《工程科学学报》.DOI
159. 肖超，张炯明，罗衍昭，胡招凡（2012）. 大方坯连铸过程凝固规律. 《工程科学学报》.
160. 刘志明，张炯明，罗衍昭（2012）. 热装热轧微合金钢板表面裂纹分析. 《钢铁》.
161. Yanzhao Luo, Jiong-Ming Zhang, Chao-Ping Xiao, Wei-Li Song, Shun-Xi Wang (2012). The Influence of Hot Charging Conditions on Microstructure and Precipitation of High Strength Nb–Ti Complex Microalloyed Steels.DOI
162. Chao-Ping Xiao, Jiong-Ming Zhang, Yanzhao Luo (2012). The Analytical Model of Microsegregation for Solute Elements in Solidifying Mushy Zone of Steel.DOI
163. Yanzhao Luo, Jiong-Ming Zhang, Chao-Ping Xiao (2012). Thermodynamic Calculation and Experimental Investigation of Second Phase Particles in Low Carbon Nb Microalloyed Steels.DOI
164. Chao-Ping Xiao, Jiong-Ming Zhang, Yang-Yang Yuan, Yanzhao Luo (2012). INVESTIGATION ON NON-METALLIC INCLUSION OF 49MnVS3 NON-QUENCHED AND TEMPERED STEEL.
165. Y.-Z. Luo, Jiong-Ming Zhang, X.-D. Wei, C. Xiao, Z.-F. Hu, Y.-Y. Yuan, S.-D. Chen (2012). Numerical simulation of solidification structure of high carbon SWRH77B billet based on the CAFE method.DOI
166. Yanzhao Luo, Jiong-Ming Zhang, Chao-Ping Xiao, Jin Yang (2012). Investigation on Non-metallic Inclusions of Q420 Ingots Cast by Bottom Teeming.DOI
167. 罗衍昭，张炯明，肖超，刘志明，吴苏州（2011）. 热装微合金化中厚板表面裂纹的研究现状. 《炼钢》.
168. 杨锦，胡波，张炯明，张建春，谢朝阳，吴苏州，赵新宇（2011）. Q420钢中非金属夹杂物的分析. 《铸造技术》.
169. 胡招凡，张炯明，蔡珍，苑阳阳，陈少东（2011）. 结晶器电磁搅拌对IF钢连铸坯表层纯净度的影响. 《钢铁研究学报》.
170. Jiong-Ming Zhang, Bing Li, Chao-Yang Wang, Shao-Dong Chen, Shao-Wu Lei (2011). Method for increasing final electromagnetic stirring intensity of continuous casting billets.
171. Jiong-Ming Zhang (2011). Study on the Control Tactics of Halfway Cracks in Slab for Wide Thick Plate.
172. 尹娜，景财良，张炯明，韩毅华，王伟（2010）. H型钢Q235B连铸保护渣的优化. 《特殊钢》.
173. 刘洋，任嵬，王文军，姜中行，张炯明（2010）. 厚板坯连铸过程宏观偏析数值模拟与测定. 《铸造技术》.
174. 谢长川，张炯明，王新华，陈志凌，孙军，焦玉亮，王成（2010）. 板坯连铸动态轻压下系统参数的优化及应用. 《炼钢》.
175. 龚雅林，张炯明，甄新刚，陈少东，姚永宽，王道远（2010）. 中碳微合金化钢高温延塑性的研究. 《钢铁》.
176. 耿明山，王新华，张炯明，王万军，刘志明（2010）. 连铸坯表面气孔缺陷研究. 《钢铁》.
177. 王金龙，王福明，李长荣，张炯明（2010）. 碳与磷含量对易切削钢9SMn28微观组织的影响. 《材料热处理学报》.DOI
178. 缪春锋，蔡可森，耿建林，张炯明（2010）. 南钢中厚板铸坯内部质量控制实践. 《2010年全国炼钢—连铸生产技术会议文集》.
179. 高攀，张炯明，吴苏州（2010）. 不同精炼工艺对管线钢洁净度的影响. 《钢铁研究》.
180. 王伟，张炯明，肖超，谢朝阳，尹娜（2010）. 连铸保护渣熔化过程中电阻变化规律的研究. 《物理测试》.
181. 甄新刚，张炯明，龚雅林，王伟，姚永宽，王道远（2010）. 中碳合金钢连铸板坯中间裂纹形成机理研究. 《铸造技术》.
182. Jin-Long Wang, Fu-Ming Wang, Chang-Rong Li, Jiong-Ming Zhang (2010). Simulation of 3D-Microstructure in Free-cutting Steel 9SMn28 under Water Cooling Condition with Convection and Porosity.DOI
183. Jiong-Ming Zhang (2010). Hot Ductility of Vanadium Micro-Alloy Steel Continuous Casting Slab.
184. Jiong-Ming Zhang (2010). Effect of different secondary-refining process on the cleanness of pipeline steel.
185. Su-Zhou Wu, Jiong-Ming Zhang, Zhi-Zheng Li (2010). Mathematic Model of SEN Clogging During Continuous Casting of Steel.DOI
186. Jiongming Zhang (2010). Numerical Simulation on Solute Macro-segregation in Thick Slab by Continuous Casting Process. Rejiagong gongyi.
187. 丁秀青，李大鹏，李宏，张炯明，王恭亮，梁玫（2009）. Q345大方坯连铸过程表面温度变化的数值模拟. 《炼钢》.
188. 景财良，尹娜，赵紫锋，王新华，张炯明，王万军（2009）. 中碳钢板坯保护渣结晶性能的优化. 《中国金属学会特钢分会，特钢冶炼学术委员会2009年会》.
189. 赵新宇，张炯明，吴苏州，陈阳，缪春峰，尹娜（2009）. T型中间包过滤器对夹杂物去除的影响. 《中国金属学会特钢分会，特钢冶炼学术委员会2009年会》.
190. 耿明山，王新华，张炯明，王万军，肖寄光（2009）. Cu、As和Sn对低合金钢连铸坯第Ⅲ脆性区的影响. 《工程科学学报》.
191. 吴苏州，张炯明（2009）. 电磁制动对结晶器流场以及温度场影响的研究. 《中国金属学会特钢分会，特钢冶炼学术委员会2009年会论文集》.
192. 刘国林，吴苏州，张炯明，王万军，王新华（2009）. 宽板坯连铸结晶器内液面波动的数值模拟. 《工程科学学报》.
193. 张开钧，王新华，刘洋，李秀刚，张炯明（2009）. 轻压下对管线钢连铸坯中心偏析影响的研究. 《炼钢》.
194. 耿明山，王新华，张炯明，王万军，肖寄光（2009）. 钢中残余元素在连铸坯和热轧板中的富集行为. 《工程科学学报》.
195. 赵紫锋，王新华，张炯明，李宏（2009）. 亚包晶钢板坯连铸保护渣凝固结晶行为的研究. 《特殊钢》.
196. 王现辉，王新华，张炯明，柴毅忠，洪兵雄（2009）. CSP铸坯内的大型夹杂物. 《钢铁研究学报》.
197. 任嵬，张炯明，张开钧，叶凡新（2009）. 连铸过程溶质元素宏观偏析的数值模拟. 《连铸》.
198. 叶凡新，张炯明，庞在刚，缪春锋，甄新刚（2009）. 板坯连铸二冷动态配水模型的开发与应用. 《连铸》.
199. 阮晓明，阎朝红，梅峰，张炯明（2009）. 宝钢板坯连铸凝固与传热模型的开发. 《连铸》.
200. 谢长川，王新华，张炯明，李富帅，王朝盈，艾健，焦玉水，陈茂敬（2009）. 板坯连铸动态轻压下扇形段的受力分析和应用. 《特殊钢》.
201. 耿明山，王新华，项利，张炯明，肖寄光（2009）. 残余元素对低合金钢连铸坯高温延塑性的影响. 《钢铁》.
202. 赵紫锋，王新华，张炯明，梅峰，康建国（2009）. 中碳钢板坯保护渣性能优化及提高拉速工业试验研究. 《钢铁》.
203. 谢长川，张炯明，王新华，叶凡新，李富帅，焦玉亮（2009）. 动态轻压下技术的研发及运用. 《钢铁》.
204. 王金龙，王福明，李长荣，张炯明（2009）. 基于CAFE法优化易切削钢9SMn28锰、硅、硫含量. 《铸造技术》.
205. 王坤，王立峰，张炯明，王坚，周剑波，孙齐松，张慧峰（2009）. 轴承钢铸坯凝固坯壳厚度变化及液相穴位置测定研究. 《第七届(2009)中国钢铁年会论文集（上）》.
206. 康建国，张炯明，徐国栋（2009）. 宝钢连铸中间包过滤器对夹杂物去除效果的研究. 《第七届(2009)中国钢铁年会论文集（上）》.
207. 赵紫锋，张炯明，王新华，李宏（2009）. 中碳钢板坯保护渣玻璃质渣膜脱玻化. 《钢铁研究学报》.
208. 王金龙，赖朝彬，王福明，张炯明，任嵬（2009）. CAFE模型机理及应用. 《钢铁研究学报》.
209. 耿明山，项利，王新华，张炯明，肖寄光（2009）. 残余元素对连铸坯和热轧板表面质量的影响. 《钢铁研究学报》.
210. Jin-Long Wang, Fu-Ming Wang, Yan-yu Zhao, Jiong-Ming Zhang, Wei Ren (2009). Numerical simulation of 3D-microstructures in solidification processes based on the CAFE method.DOI
211. Yongsheng Wang, C. Ji, Jiong-Ming Zhang, Xin-Hua Wang, Wan-Jun Wang (2009). Investigation of the solute transportation coupled with heat transfer and fluid flow during twin-roll strip casting process.DOI
212. Jiongming Zhang (2009). Study on the effect of dynamic soft reduction on the centerline segregation of continuously casting pipeline steel slab. Steelmaking.
213. Jiongming Zhang (2009). Optimization of Manganese,Silicon and Sulfur Contents in 9SMn28 Free-cutting Steel Based on a CAFE Method. Rejiagong gongyi.
214. 刘洋，王新华，颜涛，张炯明，张开均（2008）. 高性能管线钢高温延塑性对比研究. 《炼钢》.
215. 李秀刚，赵紫峰，王新华，张炯明（2008）. ASP连铸结晶器铜板热流和温度的研究. 《特殊钢》.
216. 张志强，张炯明（2008）. 连铸坯表面振痕形成机理的研究. 《钢铁研究》.
217. 陈阳，张炯明（2008）. 宽板坯连铸结晶器内氩气分布的水模型. 《钢铁研究学报》.
218. 崔立新，谢长川，刘超，孙军，张国栋，张炯明，焦玉亮，王成（2008）. 连铸动态二冷与动态轻压下控制模型开发及应用. 《2008全国第十三届自动化应用技术学术交流会论文集》.
219. 黄福祥，张炯明，王新华，方园，于艳（2008）. 双辊薄带连铸304不锈钢铸带表面横裂纹成因研究. 《钢铁》.
220. 耿明山，何矿年，张炯明，王新华，肖寄光（2008）. 中板表面微裂纹缺陷研究. 《钢铁》.
221. 赵新宇，张炯明，孙兴洪（2008）. 铁水包扒渣过程的数值模拟. 《钢铁》.
222. 季晨曦，张炯明，任嵬，王新华（2008）. 双辊薄带连铸柱状晶组织模拟. 《工程科学学报》.
223. 季晨曦，张炯明，王新华，方园，于艳（2008）. 双辊连铸不锈钢薄带凝固组织特点. 《钢铁研究学报》.
224. 黄福祥，张炯明，王新华，王盛林，方园，于艳（2008）. 夹杂物在钢液凝固前沿行为的原位动态观察. 《钢铁研究学报》.
225. 黄福祥，张炯明，王新华，季晨曦，方园，于艳（2008）. 薄带连铸304不锈钢凝固过程中生成的氧化物夹杂. 《钢铁研究学报》.
226. 陈阳，张炯明，韩丽辉（2008）. 宽板坯连铸结晶器内钢水流动的数值模拟. 《钢铁研究》.
227. 陈阳，张炯明，王三忠（2008）. 宽板坯连铸结晶器内液面波动的水模型研究. 《炼钢》.
228. 季晨曦，张炯明，王新华（2008）. 双辊薄带连铸啮合点前流动与凝固特征分析. 《炼钢》.
229. 高文芳，赵继宇，易卫东，王新华，张炯明（2008）. 钢中非金属夹杂物塑性化研究. 《炼钢》.
230. He-Ming Zhao, Xin-Hua Wang, Jiong-Ming Zhang, Wan-Jun Wang (2008). Effect of SEN structure on the mold level fluctuation and heat transfer for a medium thin slab caster.DOI
231. Jiongming Zhang (2008). Study and Implement of Dynamic Secondary Cooling System for Slab Caster. China Metallurgy.
232. Fuxiang Huang, Xin-Hua Wang, Jiong-Ming Zhang, C. Ji, Yuan Fang, Yan Yu (2008). In Situ Observation of Solidification Process of AISI 304 Austenitic Stainless Steel.DOI
233. Jiongming Zhang (2008). Water Model Experiment on Argon Gas Distribution in Wide Slab Casting Mold. Gangtie yanjiu xuebao.
234. Su-Zhou Wu, Jiong-Ming Zhang (2008). Mathematical Model for Growth of Inclusion in Deoxidization on the Basis of Unreacted Core Model.DOI
235. Fuxiang Huang, Jiong-Ming Zhang, Xin-Hua Wang, Yuan Fang, Yan Yu (2008). Nonmetallic inclusions in SUS304 strip produced by twin-roll strip casting.DOI
236. C. Ji, Jiong-Ming Zhang, Fuxiang Huang, Xin-Hua Wang, Yuan Fang, Yan Yu (2008). Microstructure of AISI 304 stainless steel strips produced by a twin-roll caster.DOI
237. Jiongming Zhang (2008). Research on the mechanism of oscillation mark formation during continuous casting of steel. Research on Iron and Steel.
238. 耿明山，王新华，张炯明，肖寄光，何矿年（2008）. Cu、As、Sn对C-Mn钢热轧板表面质量的影响. 《特殊钢》.
239. F. Yuan, Xing-Hua Wang, Jiong-Ming Zhang, Li Zhang (2008). Numerical simulation of Al2O3 deposition at a nozzle during continuous casting.DOI
240. 陆巧彤，杨荣光，王新华，张炯明，王万军（2007）. 板坯连铸结晶器内钢液表面流速水模研究. 《炼钢》.
241. 黄福祥，王盛林，张炯明，王新华，方园，于艳（2007）. 双辊薄带连铸304不锈钢中非金属夹杂物研究. 《特殊钢》.
242. 吴苏州，张炯明（2007）. 连铸浸入式水口结瘤现象的研究现状及发展. 《钢铁研究学报》.
243. 陆巧彤，王新华，于会香，张炯明，王万军（2007）. F数计算及其与板坯连铸结晶器内钢水卷渣的关系. 《工程科学学报》.
244. Jiongming Zhang (2007). Research and Development of Clogging in Immersed Nozzle During Continuous Casting. Gangtie yanjiu xuebao.
245. Qi Lu, Rongguang Yang, Xin-Hua Wang, Jiong-Ming Zhang, Wan-Jun Wang (2007). Water modeling of mold powder entrapment in slab continuous casting mold.DOI
246. He-Ming Zhao, Xin-Hua Wang, Jiong-Ming Zhang (2007). Research on mold flux for hypo-peritectic steel at high casting speed.DOI
247. 陆巧彤，杨荣光，王新华，张炯明，王万军（2006）. 板坯连铸结晶器保护渣卷渣及其影响因素的研究. 《钢铁》.
248. 王小平，张炯明（2006）. 板坯连铸机二次冷却配水研究. 《山西冶金》.
249. 赵和明，王新华，张炯明（2006）. 影响高速浇铸亚包晶钢表面质量的因素研究. 《钢铁》.
250. 袁方明，王新华，张炯明，王万军，张立（2006）. 连铸中间包水口堵塞的数值模拟. 《金属学报》.
251. 陆巧彤，杨荣光，王新华，张炯明，王万军（2006）. 板坯连铸结晶器内液面波动的水模型研究. 《内蒙古科技大学学报》.
252. 卢金雄，王文科，张炯明，王新华，王万军，郄芳（2006）. 板坯连铸结晶器吹氩对铸坯卷渣的影响. 《工程科学学报》.
253. F. Yuan, Xing-Hua Wang, Jiong-Ming Zhang, Li Zhang (2006). Online forecasting model of tundish nozzle clogging.DOI
254. Hong Li, L. Ning, Juan Wen, Jiong-Ming Zhang, Y. Sasaki, M. Hino (2006). Simulation research on monomer agglomeration of nonmetallic inclusions in steel with a diffusion limited aggregation model.DOI
255. Jiong-Ming Zhang (2006). Study on the Secondary Cooling Water for Slab Continuous Casting.
256. Jiongming Zhang (2006). Factors Effecting Surface Quality of Hypo-Peritectic Steel Slab Cast at High Speed. Ironmaking & Steelmaking Processes Products and Applications.
257. 赵紫锋，李宏，张炯明，王新华，王万军（2005）. 拉速变化过程中连铸板坯皮下夹杂物的研究. 《冶金研究中心2005年“冶金工程科学论坛”论文集》.
258. 王文科，张炯明，王新华（2005）. 彩色视频显微仪在铸坯夹杂物研究中的应用. 《冶金研究中心2005年“冶金工程科学论坛”论文集》.
259. 杨荣光，陆巧彤，王新华，张炯明，王万军（2005）. 板坯连铸结晶器内流场表面特性水模型实验研究. 《冶金研究中心2005年“冶金工程科学论坛”论文集》.
260. 郄芳，张炯明，王新华，王万军（2005）. 连铸板坯结晶器中间包水口吹氩水模型研究. 《冶金研究中心2005年“冶金工程科学论坛”论文集》.
261. 宁林新，李宏，张炯明，王万军，王新华，马瑞金（2005）. 钢中夹杂物的分形维数. 《钢铁研究学报》.
262. 胡皓，赵和明，张炯明，王新华，王万军（2005）. 结晶器液面波动的水模型研究. 《钢铁钒钛》.
263. 李宏，温娟，宁林新，张炯明，王新华，佐佐木康，日野光兀（2005）. 应用分形理论模拟钢中夹杂物粒子凝聚行为的研究. 《2005中国钢铁年会论文集（第3卷）》.
264. 张炯明，邓凤琴，王文科，王新华，牟济宁，唐海波，汪宁（2004）. 连铸中间包钢水夹杂物浓度的数值模拟. 《工程科学学报》.
265. 王立峰，王新华，张炯明，王万军，卓小军（2004）. 控制高碳钢中CaO-Al2O3-SiO2类夹杂物成分的实验研究. 《钢铁》.
266. 张富强，李超，姜振生，王新华，张炯明，朱国森（2004）. 连铸板坯中心裂纹和三角区裂纹的成因及防止. 《钢铁》.
267. 张炯明，吕龙厅，王平安，赵康，岳庆海（2004）. 连铸坯凝固传热数学模型的研究. 《连铸》.
268. 张炯明，吕龙厅，王平安，赵康，岳庆海（2004）. HRB335方坯表面横裂纹的研究. 《炼钢》.
269. Jiong-Ming Zhang, Qing-Hai Yue (2004). Study on solidification and heat transfer mathematical model on continuonsly cast billet.
270. Xin-Hua Wang, Jian Zhang, Zhiyuan Zhu, Jiong-Ming Zhang (2004). Solidification of Stainless Steel on Sheet of Carbon Steel in Inversion Strip Casting.
271. Xin-Hua Wang, Jiong-Ming Zhang, Guo-Sen Zhu, Wan-Jun Wang, Hong Li, Yang Liu (2004). Method for controlling continuous casting slab trigon crack.
272. Jiong-Ming Zhang (2004). Study on Transverse Cracks on Surface of Billets HRB335.
273. Jiong-Ming Zhang (2004). Numerical Simulation of Dimensionless Inclusion Concentration in T-Shape Tundishes.
274. 张炯明，王立峰，王新华，张立，唐海波（2003）. 板坯连铸结晶器传热系数. 《金属学报》.
275. 吕龙厅，常永芳，张炯明（2003）. 20MnSi方坯表面横裂纹的研究. 《中国金属学会2003中国钢铁年会论文集（3）》.
276. 张炯明，张立，王新华，王立峰（2003）. 板坯连铸结晶器热流量分布的研究. 《金属学报》.
277. 姚利丽，张炯明，王新华，邵剑（2003）. 连铸板坯二冷模型及配水制度的优化. 《连铸》.
278. 于会香，朱国森，王新华，张炯明，王万军（2003）. 连铸板坯结晶器内钢液吹氩行为的数值模拟. 《工程科学学报》.
279. 王立峰，张炯明，王新华，靳庆峰（2003）. 低碱度顶渣控制帘线钢中MnO-Al2O3-SiO2类夹杂物成分的实验研究. 《工程科学学报》.
280. 于会香，张炯明，王万军，王新华，杨振亚，杨立新（2002）. 板坯连铸浸入式水口出口速度对结晶器流场影响的数值模拟. 《工程科学学报》.
281. Jiong-Ming Zhang, Huixiang Yu, Xin-Hua Wang (2002). Flow Control in Continuous Slab-Casting Mold by F Index Obtained Through Mathematical Simulation.
282. 张立，梅华阳，王新华，张炯明（2001）. 宝钢板坯连铸结晶器平均热流研究. 《2001中国钢铁年会论文集（上卷）》.
283. 王文军，王新华，张炯明，王万军，张立，牟济宁（2001）. 取样器对连铸中间罐钢水总氧含量的影响. 《连铸》.
284. 史国敏，张立，郑贻裕，职建军，王文军，张炯明，王万军，王新华（2000）. 转炉-CAS-连铸工艺生产低碳铝镇静钢中非金属夹杂物的研究. 《钢铁》.
285. 朱志远，王新华，王万军，张炯明（2000）. 板坯连铸结晶器内坯壳厚度及枝晶间距. 《工程科学学报》.
286. 王文军，王新华，张炯明，王万军，王德城，周有预（2000）. 连铸生产焊接气瓶钢中夹杂物. 《工程科学学报》.
287. 许中波，朱志远，王万军，张炯明，王立峰（1999）. 反向凝固复合不锈钢带厚度数值计算. 《钢铁研究学报》.
288. 王仁贵，郑敏，张炯明（1999）. 方坯连铸结晶器三维流场的数值模拟. 《鞍钢技术》.
289. 张炯明，王万军，赫冀成（1998）. 对电磁制动后连铸结晶器内流体流动的分析. 《连铸》.
290. 姜永林，张炯明，钟良才，陈小平，杜喜明，唐月（1995）. 连铸高拉速弱冷却高温出坯技术. 《连铸》.
291. Jiong-Ming Zhang (1995). INFLUENCE OF GAS INJECTION ON FLUID FLOW IN MOULD.