百晓学者学者目录

丁国良

上海交通大学制冷与低温工程研究所

精选作品

期刊论文

  1. 蒋骏,詹飞龙,周绍华,丁国良,王飞,代传民,刘志孔(2026). 温湿度独立可控的二管制空调器开发. 《制冷技术》.
  2. 张超超,詹飞龙,周文艺,宋霞,丁国良,岳宝,李丰,黎辉玲(2026). 冷水机组末端风盘用铜管和不锈钢管的管内侧加速结垢对比. 《制冷技术》.
  3. 王龙炎,曹昊敏,丁国良,丁屹,成建宏(2026). 房间空调器能效标准发展趋势研究. 《制冷与空调》.
  4. 曾志强,庄大伟,丁国良(2026). 电动汽车液冷整车控制器凝露风险仿真模型建立. 《暖通空调》.
  5. 邓德喜,詹飞龙,周文艺,李聪,丁国良(2026). 热泵干衣机气动噪声特性研究与预测关联式开发. 《制冷技术》.
  6. 廖健生,燕子腾,詹飞龙,丁国良,郑立宇(2026). 家用空调压缩机储液器出口带液量预测模型. 《制冷学报》.
  7. Ziteng Yan, Feil Zhan, Wenyi Zhou, Guoliang Ding, Bao Yue, Zhigang Wu, Yanpo Shao (2026). Experimental investigation and modeling of oil retention of R454B-PVE oil mixture in suction pipes of air conditioners. International journal of refrigeration.DOI
  8. Wenyi Zhou, Feil Zhan, Guoliang Ding, Bao Yue, Feng Li, Xia Song, Huiling Li, Chaochao Zhang (2026). Experimental comparison of water fouling characteristics on copper tubes and stainless steel tubes applied in central air-conditioning. Applied Thermal Engineering.DOI
  9. Long-Yan Wang, Haomin Cao, Guoliang Ding, Yanpo Shao, Bao Yue, Zhigang Wu, Jiansheng Liao (2026). A critical review and comparative study on positive displacement compressor models for fast performance prediction in wide working condition ranges. Science and Technology for the Built Environment.DOI
  10. Guangjun Li, D. Zhuang, Guoliang Ding, Kun Xiao, Zhe-Xuan Liu (2026). Modelling and experimental validation of unsteady mass flow distribution from header to parallel tubes in a microchannel evaporator. International journal of refrigeration.DOI
  11. L W Wang, Haomin Cao, Guoliang Ding, Yanpo Shao, Bao Yue, Zhigang Wu, Jiansheng Liao (2026). Development and experimental validation of a fast prediction model for scroll compressors with two-phase injection. International Journal of Refrigeration.DOI
  12. 张文锋,郭玮,张新玉,曹昊敏,丁国良(2025). 铝管铝翅片换热器模型开发及软件实现. 《化工学报》.
  13. 卓森庆,陈华,陈伟,尚彬,刘恒恒,古汤汤,白韡,王龙炎,曹昊敏,丁国良(2025). 多联式空调系统APF性能仿真的模型开发与软件实现. 《化工学报》.
  14. 燕子腾,詹飞龙,丁国良(2025). 空调用套管式分流器结构设计及分流效果验证. 《化工学报》.
  15. 李钰涵,詹飞龙,丁国良,骆名文,岳宝,李丰,李宁,邵艳坡,马超,张欢(2025). 冷水机组换热管小管径化的结垢风险分析. 《制冷学报》.
  16. 廖健生,王龙炎,曹昊敏,陈栋宇,丁国良,郑立宇(2025). 高精度R454B变频压缩机半经验模型开发. 《暖通空调》.DOI
  17. 杨果成,郑棓仁,丁国良,陈杰(2025). 螺旋折流板管壳式换热器壳侧碳氢工质两相流型实验研究. 《制冷学报》.
  18. 岳宝,王龙炎,曹昊敏,吴志刚,翁晓敏,丁国良(2025). 补气增焓型涡旋式压缩机半经验模型建立与实验验证. 《制冷学报》.
  19. Haomin Cao, Zhiqiang Zeng, D. Zhuang, Guoliang Ding, Yanpo Shao, Hao Zhang, Wenduan Qi, Xiong Zheng (2025). An adaptive control method for room air conditioners based on application scene identification and user preference prediction. International journal of refrigeration.DOI
  20. Shaohua Zhou, Feil Zhan, Tianjie Zhu, Guoliang Ding, Hao Zhang, Yanpo Shao, Yan-Tao Liu, Zheming Gao (2025). Method of inlet refrigerant flow pattern transformation for decreasing flowing noise in electronic expansion valve. Applied Thermal Engineering.DOI
  21. Wenyi Zhou, Feil Zhan, Ziteng Yan, Guoliang Ding, De-Xi Deng, Cong Li, J. Xiong, Zhanbo Yang (2025). Development of low-noise and large-air flow rate bionic serrated blades for multi-blade centrifugal fans in heat pump dryers. Case Studies in Thermal Engineering.DOI
  22. Shaohua Zhou, Feil Zhan, Guoliang Ding (2025). Prediction and suppression of whistling noise in electronic expansion valve. International journal of refrigeration.DOI
  23. Ziteng Yan, Feilong Zhan, Guoliang Ding, Jiansheng Liao, Liyu Zheng (2025). Numerical simulation and experimental validation of dynamic liquid-return characteristics of refrigerant-lubricating oil mixtures in accumulator of room air-conditioner. International Journal of Refrigeration.DOI
  24. 王龙炎,曹昊敏,丁国良,刘恒恒,古汤汤,卓森庆,陈君,白韡(2024). 热泵型多联式空调系统稳态仿真. 《暖通空调》.
  25. 刘艳涛,朱天杰,詹飞龙,周绍华,丁国良,冀甲博,郜哲明(2024). 基于流型调整器结构优化的电子膨胀阀降噪设计. 《制冷学报》.
  26. 朱天杰,詹飞龙,周绍华,丁国良,崔国栋,刁洪福,王海胜(2024). 多联式热泵空调用电子膨胀阀进出口流向控制对节流噪声影响的实验研究. 《制冷学报》.
  27. 翁晓敏,王龙炎,丁国良(2024). 面向最小实验数据需求的压缩机模型优选. 《家电科技》.
  28. 周文艺,詹飞龙,丁国良,邓德喜,李聪,熊琎,杨展博(2024). 热泵干衣机用风机气动噪声仿真及降噪叶轮设计. 《家电科技》.
  29. Shaohua Zhou, Feil Zhan, Tianjie Zhu, Guoliang Ding, Hexin Liu, Wei Chen, Hua Chen (2024). Effects of electronic expansion valve tube arrangement on reduction of two-phase refrigerant throttling noise. International journal of refrigeration.DOI
  30. Haomin Cao, Hao Zhang, D. Zhuang, Guoliang Ding, Junjie Lei, Zhi-Gang Huang, Shunquan Li, Jianfeng Li (2024). Variable evaporating temperature control strategy for a VRF system based on continual estimation of cooling capacity demand of rooms. Energy and Buildings.DOI
  31. Jingchao Lu, Guoliang Ding, D. Zhuang, Guangjun Li, Wei Huang, Gan Song, Bin He, Rui Ma, Feng Wang (2024). A graph theory-based modelling method for multi-splitting-merging-channel refrigerant-cooled evaporator in battery thermal management. Applied Thermal Engineering.DOI
  32. Haomin Cao, D. Zhuang, Guoliang Ding, Shunquan Li, Zhigang Huang, Yanpo Shao, Hao Zhang, Dongyu Chen (2024). Cooperative control strategy of variable evaporation temperature and variable superheat degree for a VRF system to improve temperature stability in multiple rooms. International journal of refrigeration.DOI
  33. Li-Yi Xie, D. Zhuang, Guangjun Li, Guoliang Ding (2024). Experimental investigation and simulation on dynamic precipitation characteristics of R32-lubricating oil mixture in heat pump systems. Applied Thermal Engineering.DOI
  34. Guocheng Yang, Zheng Chang, Guoliang Ding (2024). Experimental study on optimizing liquid distribution in spiral wound heat exchangers: Influence of two-phase flow parameters and geometry. Case Studies in Thermal Engineering.DOI
  35. Ziteng Yan, Feil Zhan, Guoliang Ding, Bao Yue, Zhigang Wu, Hao Zhang, Yanpo Shao, Xiao-Min Weng, Jianfeng Li (2024). Modeling and experimental investigation of oil retention in pipelines of multi-split air conditioning system. International journal of refrigeration.DOI
  36. Jingchao Lu, D. Zhuang, Guoliang Ding, Dongyu Chen (2024). Application of vortex generators to avoid subcooled flow boiling oscillation in micro-channel. International journal of refrigeration.DOI
  37. Guangjun Li, D. Zhuang, Li-Yi Xie, Guoliang Ding, Jiansheng Liao, Siqing Liao, Wang Kan, Ji Song, Yi-Feng Gao (2024). Stratification and heat transfer characteristics for R32-partially miscible oil mixture flow boiling inside a micro-fin tube. International journal of refrigeration.DOI
  38. Jingchao Lu, D. Zhuang, Guoliang Ding, Guangjun Li, Yue-Ming Wang (2024). A distributed parameter model of refrigerant-cooled multi-channel evaporator for battery thermal management. Energy.DOI
  39. Feil Zhan, Wenyi Zhou, Ziteng Yan, Guoliang Ding, Bao Yue, Feng Li, Ning Li, Yanpo Shao, Chao Ma, Huan Zhang (2024). Comparative investigation on water fouling characteristics in 5 mm and 7 mm tubes with smooth type and screwed type. International journal of refrigeration.DOI
  40. Liyi Xie, Dawei Zhuang, Guoliang Ding (2024). Measurement and correlation development of the diffusion coefficient of R32 in lubricating oil. International Journal of Refrigeration.DOI
  41. 孙齐鸣,庄大伟,曹昊敏,丁国良,戚文端,邵艳坡,郑雄,张浩(2023). 空调控制参数用户设定偏好的预测方法. 《暖通空调》.
  42. 谢丽懿,庄大伟,李广,丁国良,郑立宇,廖四清,卢耀汕,阚望,龙春仙(2023). 部分互溶的R32-润滑油混合物核态沸腾中分层与换热特性. 《暖通空调》.
  43. 李钰涵,詹飞龙,丁国良,骆名文,李丰,邵艳坡(2023). 水循环管路内结垢影响的研究现状和除垢方法进展. 《暖通空调》.
  44. 丁国良(2023). 制冷空调用换热器的高效传热技术. 《制冷与空调》.
  45. 燕子腾,曹昊敏,庄大伟,丁国良,太田谕,佐藤全秋,铃木秀明(2023). 高落差多分支管路结构对多联式空调系统能力影响的快速仿真. 《制冷学报》.
  46. 王玥明,卢经朝,庄大伟,丁国良,郑跃东,韩聪,王聪聪(2023). 基于多层分水盘结构的冷热饮水机能效提升方法. 《制冷学报》.
  47. 陈炫丞,庄大伟,余岳峰,丁国良(2023). 变频空调器APF快速计算的显式表达式. 《制冷学报》.
  48. 王玥明,卢经朝,庄大伟,丁国良(2023). 微针肋结构大过冷度强化沸腾传热实验研究. 《制冷学报》.
  49. 许尹慧子,陈炫丞,庄大伟,丁国良,徐玮,陆晔飞(2023). 罐式冷藏集装箱冷凝器的风道降阻设计. 《制冷学报》.
  50. 陈炫丞,庄大伟,丁国良,余岳峰,成建宏,吴国明(2023). GB 21455—2019中低温中间制冷工况参数获取方法不唯一导致的APF值计算的问题分析. 《制冷学报》.
  51. 李广,庄大伟,谢丽懿,丁国良,胡国新,郑立宇,廖四清,卢耀汕,阚望,龙春仙(2023). 相溶性对R32-润滑油混合物管内流动沸腾换热及压降特性的影响. 《制冷学报》.
  52. Bao Yue, Guangjun Li, Jianfeng Li, Zhigang Wu, Hao Zhang, Yanpo Shao, D. Zhuang, Guoliang Ding, Xiao-Min Weng, Zhuang Zhou (2023). Flow condensation heat transfer correlation development of R32-oil mixture inside a micro-fin tube. International journal of refrigeration.DOI
  53. Guang Li, Dawei Zhuang, Liyi Xie, Guoliang Ding, Bao Yue, Bo Fan, Hao Zhang, Yanpo Shao (2023). Development of boiling flow pattern map and heat transfer correlation of R32-oil mixture inside a horizontal micro-fin tube. International Journal of Refrigeration.DOI
  54. Jingchao Lu, Dawei Zhuang, Yueming Wang, Guoliang Ding (2023). Effects of vortex generator on subcooled flow boiling characteristics in micro-channel. International Journal of Heat and Mass Transfer.DOI
  55. 郜哲明,周绍华,詹飞龙,丁国良,张浩,刘艳涛(2022). 制冷剂流态对短管节流阀噪音影响的实验研究. 《制冷技术》.
  56. 张浩,刘璐,詹飞龙,丁国良,刘艳涛,郜哲明(2022). 空调器水平管路内R32流动过程的流型变化规律. 《制冷技术》.
  57. 丁国良(2022). 面向产品设计的空调设备性能仿真方法. 《暖通空调》.
  58. 高欢,丁国良,周发贤,庄大伟(2022). R410A制冷剂在润滑油中的动态析出特性的研究. 《化工学报》.
  59. 陈伟,燕子腾,曹昊敏,白韡,刘恒恒,丁国良(2022). 管径缩小后空调器室外换热器的优化设计与试验验证. 《流体机械》.
  60. 李广,庄大伟,谢丽懿,丁国良,郑立宇,龙春仙,江波(2022). 含油R32管内流动沸腾换热特性测试及关联式开发. 《化工学报》.
  61. 刘璐,詹飞龙,丁国良,孟建军,石丽华,王庆杰(2022). 空调用不同类型压降式分配器分流均匀性的实验对比. 《制冷学报》.
  62. 周绍华,詹飞龙,丁国良,孟建军,王庆杰(2022). 电子膨胀阀内啸叫噪声特性及发声规律的实验研究. 《制冷学报》.
  63. 刘璐,刘艳涛,詹飞龙,丁国良,郜哲明,许学飞(2022). 提高制冷剂分流均匀性的分配器连接管结构设计. 《制冷学报》.
  64. 白韡,曹昊敏,燕子腾,陈伟,刘恒恒,丁国良(2022). 管排结构不规则的空调器用翅片管换热器性能仿真. 《暖通空调》.
  65. Dawei Zhuang, Faxian Zhou, Guoliang Ding (2022). Effects of Sloshing Motions on Condensation Heat Transfer Characteristics of Integral-Fin Tubes Under Sea Conditions. ASME Journal of Heat and Mass Transfer.DOI
  66. Feilong Zhan, Guoliang Ding, Lu Liu (2022). Experimental investigation on water vapor permeability in porous dust layers on cold fin surface of heat exchanger. International Journal of Refrigeration.DOI
  67. Liyi Xie, Dawei Zhuang, Zhiqiang Li, Guoliang Ding (2022). Technical Characteristics and Development Trend of Printed Circuit Heat Exchanger Applied in Floating Liquefied Natural Gas. Frontiers in Energy Research.DOI
  68. Shaohua Zhou, Feilong Zhan, Guoliang Ding (2022). Experimental investigation on two-phase flow noise characteristics of R410A through electronic expansion valve of multi-split air conditioner. International Journal of Refrigeration.DOI
  69. Liyi Xie, Dawei Zhuang, Guang Li, Faxian Zhou, Guoliang Ding (2022). Stratification and heat transfer characteristics of partially miscible lubricating oil-refrigerant mixtures during pool boiling. Applied Thermal Engineering.DOI
  70. 林竹,刘璐,詹飞龙,丁国良,胡鹏飞(2021). 圆锥式分流器的分流均匀性条件分析及结构改进. 《制冷与空调》.
  71. 刘璐,詹飞龙,丁国良,韩晓蕾(2021). 风冷冰箱开关门过程中箱室内温度场变化的CFD模拟. 《家电科技》.DOI
  72. 张浩,曹昊敏,黄志刚,丁国良,黎顺全,庄大伟,李健锋(2021). 变蒸发温度的多联机节能控制策略. 《制冷技术》.
  73. 刘璐,丁国良,庄大伟,杨艺菲,杜心远(2021). 微通道换热器百叶窗翅片排水性能的CFD模拟. 《化工学报》.
  74. 陈杰,李剑锐,密晓光,丁国良,胡海涛,丁超(2021). 垂荡工况绕管式换热器壳侧流动沸腾换热特性实验研究. 《制冷技术》.
  75. 高欢,顾昕,丁国良(2021). 制冷剂回收与再生现状分析. 《制冷学报》.
  76. 燕子腾,吴国明,庄大伟,丁国良,曹法立,孟建军(2021). 用于微通道换热器的循环流道分流器的设计方法与应用效果. 《化工学报》.
  77. 詹飞龙,胡尊涛,丁国良,张浩(2021). 金属翅片冷表面多孔性灰尘内水气透湿过程的实验研究. 《制冷学报》.
  78. Faxian Zhou, Tianhong Lu, Dawei Zhuang, Guoliang Ding (2021). Experimental study of condensation heat transfer characteristics on metal foam wrapped tubes under sloshing conditions. International Journal of Heat and Mass Transfer.DOI
  79. Guocheng Yang, Guoliang Ding, Jie Chen, Wengang Yang, Suyang Hu (2021). Shell side condensation heat transfer characteristics of ethane/propane mixtures. Applied Thermal Engineering.DOI
  80. 密晓光,陈杰,鹿来运,张晓慧,常铮,丁国良(2020). 绕管式换热器层间质量迁移特性的试验研究. 《流体机械》.
  81. 夏家辉,段钟弟,丁国良,徐卫忠(2020). 防冻堵的船用绕管式LNG气化器设计. 《制冷学报》.
  82. 赵夫峰,武滔,何哲旺,吴国明,任滔,丁国良(2020). 空调室外换热器分布式流路设计与实验验证. 《制冷学报》.
  83. 陆天宏,周发贤,庄大伟,丁国良(2020). 重力场中水平纤维悬垂液滴形状的模型研究. 《化工学报》.
  84. 宋吉,吴国明,丁国良(2020). 基于新能效等级标准的房间空调器的换热器设计. 《制冷技术》.
  85. 詹飞龙,丁国良,庄大伟,张浩,武滔,叶向阳(2020). 析湿工况下翅片管式换热器表面粉尘沉积过程的数值模型. 《化工学报》.
  86. 杨艺菲,庄大伟,丁国良,詹飞龙,韩维哲,贾正余,史文斯,戚邗云(2020). 翅片表面涂层对结化霜除灰特性的影响. 《制冷学报》.
  87. 胡尊涛,詹飞龙,庄大伟,丁国良,张浩,武滔,叶向阳(2020). 空调器用换热器的换热量衰减率测试方法. 《制冷学报》.
  88. Faxian Zhou, Dawei Zhuang, Tianhong Lu, Guoliang Ding (2020). Observation and modeling of droplet shape on metal fiber with gravity effect. International Journal of Heat and Mass Transfer.DOI
  89. Guoming Wu, Ziteng Yan, Dawei Zhuang, Guoliang Ding, Fa-li Cao, Jianjun Meng (2020). Design method and application effects of embedded-clapboard distributor on refrigerant distribution among multi-tubes of micro-channel heat exchangers. International Journal of Refrigeration.DOI
  90. Yifei Yang, Dawei Zhuang, Guoliang Ding, Feilong Zhan (2020). Numerical model of dusty-water bridge forming between neighbor fins of fin-and-tube heat exchangers. International Journal of Refrigeration.DOI
  91. Faxian Zhou, Tianhong Lu, Guoliang Ding, Guocheng Yang (2020). Experimental research on flow mode transition of falling film flow on metal foam wrapped tubes. Experimental Thermal and Fluid Science.DOI
  92. Guanghui Xia, Dawei Zhuang, Guoliang Ding, Jingchao Lu, Weizhe Han, Hanyun Qi (2020). A distributed parameter model for multi-row separated heat pipe with micro-channel heat exchangers. Applied Thermal Engineering.DOI
  93. Zhiqiang Li, Guoliang Ding, Songtao Miao, Xiaolei Han (2020). Development of novel air distributor for precise control of cooling capacity delivery in multi-compartment indirect cooling household refrigerators. International Journal of Refrigeration.DOI
  94. Guoming Wu, Bo Yu, Tao Ren, Guoliang Ding (2020). Modeling and experimental investigation on comprehensive performance of perforated wavy fins for heat pump type air conditioners at frosting and non-frosting conditions. Energy and Buildings.DOI
  95. Guanghui Xia, Dawei Zhuang, Guoliang Ding, Jingchao Lu (2020). A quasi-three-dimensional distributed parameter model of micro-channel separated heat pipe applied for cooling telecommunication cabinets. Applied Energy.DOI
  96. Dawei Zhuang, Yifei Yang, Guoliang Ding, Xinyuan Du, Zuntao Hu (2020). Optimization of Microchannel Heat Sink with Rhombus Fractal-like Units for Electronic Chip Cooling. International Journal of Refrigeration.DOI
  97. Jiawen Hu, Chengcheng Shan, Jianhong Wu, Aili Zhang, Guoliang Ding, Lisa Xuemin Xu (2020). A cooperative ceiling air supply method to satisfy personal thermal preferences in a discretionary indoor position. Journal of Building Engineering.DOI
  98. Guoming Wu, Guoliang Ding, Tao Ren (2020). A fast prediction method for maximum APF of heat pump type air conditioners based on a single group of experimental data. International Journal of Refrigeration.DOI
  99. Zhongdi Duan, Guoliang Ding, Wenyong Tang, Tao Ren (2020). A thermodynamic model for predicting transient pressure evolution in response to venting and vaporization of liquefied gas under sudden release. Journal of Hazardous Materials.DOI
  100. 周发贤,赖展程,胡海涛,丁国良(2019). 横摇对泡沫金属内液体疏泄特性影响的实验研究. 《制冷技术》.
  101. 张浩,何哲旺,武滔,吴国明,任滔,丁国良(2019). 一种提升空调换热的室外机分布式流路模型开发. 《制冷技术》.
  102. 丁国良,吴国明,刘挺(2019). 制冷空调换热器的研究进展(一)——小管径翅片管换热器. 《家电科技》.DOI
  103. 赵定乾,吴国明,任滔,丁国良,宋吉,吴俊鸿(2019). 采用环状流实现均匀分配的空调器分流器研究. 《制冷学报》.
  104. 沈佳敏,吴国明,任滔,丁国良(2019). 变频空调器最大APF指标的快速求解方法. 《制冷学报》.
  105. 谢丽懿,李智强,丁国良(2019). FLNG用印刷板路换热器技术特点及发展趋势. 《化工学报》.
  106. 盛伟,兰庆云,刘鹏鹏,李雪丽,丁国良(2019). 铝表面结霜的试验研究及CFD模拟. 《流体机械》.
  107. 王康硕,任滔,杨怀毅,丁国良,董洪洲,宋晓,李刚(2019). 空调换热器组件的仿真与图形生成一体化平台开发. 《制冷技术》.
  108. 丁国良,詹飞龙,庄大伟,高屹峰,张浩,武滔(2019). 制冷空调换热器的研究进展(三)——换热器长效性能. 《家电科技》.DOI
  109. 丁国良,庄大伟,李智强,谢丽懿,韩维哲,魏文建(2019). 制冷空调换热器的研究进展(二)——紧凑式换热器. 《家电科技》.DOI
  110. 鞠培玲,庄大伟,詹飞龙,丁国良,唐家俊(2019). 空调换热器长期运行性能衰减的加速实验研究. 《制冷学报》.
  111. 盛伟,兰庆云,裴阳,丁国良(2019). 结霜工况下微通道蒸发器制冷剂分布特性. 《制冷学报》.
  112. Chengcheng Shan, Jiawen Hu, Jianhong Wu, Aili Zhang, Guoliang Ding, Lisa Xuemin Xu (2019). Towards non-intrusive and high accuracy prediction of personal thermal comfort using a few sensitive physiological parameters. Energy and Buildings.DOI
  113. Dawei Zhuang, Yifei Yang, Guoliang Ding, Feilong Zhan (2019). Optimization of fin surface wettability for promoting the dust removal in heat exchangers under frosting-defrosting conditions. International Journal of Refrigeration.DOI
  114. Guocheng Yang, Guoliang Ding, Jie Chen, Wengang Yang, Suyang Hu (2019). Experimental study on shell side heat transfer characteristics of two-phase propane flow condensation for vertical helically baffled shell-and-tube exchanger. International Journal of Refrigeration.DOI
  115. Haitao Hu, Faxian Zhou, Zhancheng Lai, Guoliang Ding (2019). Influence of surface wettability on liquid drainage characteristics of metal foams under sloshing conditions. International Journal of Refrigeration.DOI
  116. Zhancheng Lai, Haitao Hu, Guoliang Ding (2019). Influence of pore density on heat transfer and pressure drop characteristics of wet air in hydrophilic metal foams. Applied Thermal Engineering.DOI
  117. Haitao Hu, Chao Ding, Guoliang Ding, Jie Chen, Xiaoguang Mi, Sicong Yu (2019). Experimental study of heat transfer and pressure drop characteristics of two-phase mixed hydrocarbon refrigerants flow boiling in shell side of spiral wound heat exchanger. IOP Conference Series Materials Science and Engineering.DOI
  118. Sicong Yu, Jie Chen, Xiaoguang Mi, Laiyun Lu, Guoliang Ding, Chao Ding (2019). Experimental and numerical investigation of two-phase flow outside tube bundle of liquefied natural gas spiral wound heat exchangers under offshore conditions. Applied Thermal Engineering.DOI
  119. Feilong Zhan, Guoliang Ding, Dawei Zhuang (2019). Numerical model of particle deposition on wet fin surfaces of heat exchanger under dehumidifying conditions. International Journal of Heat and Mass Transfer.DOI
  120. Zhiqiang Li, Zeng Xianshun, Dan Hua Zhao, Guoliang Ding (2019). Schemes and effects on improvement of temperature uniformity inside indirect cooling wine cabinet. Applied Thermal Engineering.DOI
  121. 密晓光,杨果成,陈杰,丁国良(2018). 混合碳氢制冷剂在螺旋折流板管壳式冷凝器壳侧冷凝特性的实验研究. 《制冷技术》.
  122. 胡晨昱,赖展程,胡海涛,丁国良,韩维哲(2018). 疏水改性对泡沫金属表面池沸腾换热特性的影响. 《制冷技术》.
  123. 赵定乾,任滔,丁国良,高屹峰,宋吉(2018). 房间空调器采用3mm铜管的设计与性能分析. 《制冷技术》.
  124. 于博,吴国明,任滔,丁国良(2018). 提升热泵空调器制热性能的镂空翅片开发及性能分析. 《制冷技术》.
  125. 密晓光,陈杰,余思聪,丁超,胡海涛,丁国良(2018). 混合工质摩尔配比对LNG绕管式换热器壳侧换热特性的影响. 《流体机械》.
  126. 鞠培玲,詹飞龙,庄大伟,丁国良,唐家俊(2018). 翅片管换热器在析湿工况下的积灰特性及对空气侧压降的影响. 《制冷学报》.
  127. 密晓光,陈杰,余思聪,丁超,胡海涛,丁国良(2018). LNG绕管式换热器壳侧两相流动压降特性的实验研究. 《制冷技术》.
  128. 丁超,胡海涛,丁国良,陈杰,密晓光,余思聪(2018). 运行工况对LNG绕管式换热器壳侧换热特性的影响. 《化工学报》.
  129. 杨怀毅,任滔,丁国良,陈绍楷,刘忠民(2018). 基于有限测点的空调系统性能在线监测方法. 《制冷学报》.
  130. 常铮,林灵楠,丁国良,彭浩(2018). 表面改性对含油纳米制冷剂中颗粒油相迁移特性的影响. 《制冷学报》.
  131. Faxian Zhou, Haitao Hu, Zhancheng Lai, Guoliang Ding (2018). Experimental study on liquid drainage characteristics of metal foams under sloshing conditions. International Journal of Refrigeration.DOI
  132. Guoming Wu, Tao Ren, Guoliang Ding, Bo Yu (2018). A Perforated Enhanced Fin to Improve Heat Transfer Performance of a Heat Pump Type Air Conditioner. Transactions of the Japan Society of Refrigerating and Air Conditioning Engineers.DOI
  133. Yifei Yang, Dawei Zhuang, Guoliang Ding (2018). Effect of surface wettability of fins on dust removal by condensate water. International Journal of Heat and Mass Transfer.DOI
  134. Haitao Hu, Chao Ding, Guoliang Ding, Jie Chen, Xiaoguang Mi, Sicong Yu (2018). Heat transfer characteristics of two-phase mixed hydrocarbon refrigerants flow boiling in shell side of LNG spiral wound heat exchanger. International Journal of Heat and Mass Transfer.DOI
  135. Haoran Sun, Haitao Hu, Guoliang Ding, Hui Chen, Zhigang Zhang, Chunlin Wu, Li‐Chun Wang (2018). A general distributed-parameter model for thermal performance of cold box with parallel plate-fin heat exchangers based on graph theory. Applied Thermal Engineering.DOI
  136. Zhongdi Duan, Tao Ren, Guoliang Ding (2018). Suppression effects of micro-fin surface on the explosive boiling of liquefied gas under rapid depressurization. Journal of Hazardous Materials.DOI
  137. Guoming Wu, Tao Ren, Guoliang Ding, Bo Lin Yu (2018). Design and visualized validation of a distributor with uniform refrigerant distribution by forming annular flow. International Journal of Refrigeration.DOI
  138. Haitao Hu, Zhancheng Lai, Guoliang Ding (2018). Influence of surface wettability on heat transfer and pressure drop characteristics of wet air in metal foam under dehumidifying conditions. International Journal of Thermal Sciences.DOI
  139. Guocheng Yang, Haitao Hu, Guoliang Ding, Jie Chen, Wengang Yang, Suyang Hu (2018). Influence of component proportion on heat transfer characteristics of ethane/propane mixture flow condensation in shell side of helically baffled shell-and-tube heat exchanger. Experimental Thermal and Fluid Science.DOI
  140. Feilong Zhan, Dawei Zhuang, Guoliang Ding, Peiling Ju, Jiajun Tang (2018). Influence of wet-particle deposition on air-side heat transfer and pressure drop of fin-and-tube heat exchangers. International Journal of Heat and Mass Transfer.DOI
  141. Feilong Zhan, Dawei Zhuang, Guoliang Ding (2018). An analytical model for predicting the particle-deposited fin efficiency. International Journal of Refrigeration.DOI
  142. Zhancheng Lai, Haitao Hu, Guoliang Ding (2018). Effect of porosity on heat transfer and pressure drop characteristics of wet air in hydrophobic metal foam under dehumidifying conditions. Experimental Thermal and Fluid Science.DOI
  143. Haitao Hu, Guocheng Yang, Guoliang Ding, Jie Chen, Wengang Yang, Suyang Hu (2018). Heat transfer characteristics of mixed hydrocarbon refrigerant flow condensation in shell side of helically baffled shell-and-tube heat exchanger. Applied Thermal Engineering.DOI
  144. Haitao Hu, Zhancheng Lai, Guoliang Ding (2018). Heat transfer and pressure drop characteristics of wet air flow in metal foam with hydrophobic coating under dehumidifying conditions. Applied Thermal Engineering.DOI
  145. Guanghui Xia, Dawei Zhuang, Guoliang Ding (2018). Thermal management solution for enclosed controller used in inverter air conditioner based on heat pipe heat sink. International Journal of Refrigeration.DOI
  146. Lingnan Lin, Zheng Chang, Guoliang Ding (2018). Resuspension of deposited nanoparticles during pool boiling. International Journal of Heat and Mass Transfer.DOI
  147. Guanghui Xia, Dan Hua Zhao, Guoliang Ding, Dawei Zhuang, Feilong Zhan (2018). A model for predicting air permeation between temperature-fluctuated refrigerated room and ambience through magnetic seal. International Journal of Refrigeration.DOI
  148. Zhiqiang Li, Dan Hua Zhao, Guoliang Ding, Tao Ren, Songtao Miao, Xiaolei Han (2018). Effect of enthalpy exchanger on reducing frost accumulation on evaporator in frost-free refrigerator. International Journal of Refrigeration.DOI
  149. Haoran Sun, Haitao Hu, Jingwei Wu, Guoliang Ding, Geping Li, Chengyun Wu, Xuyang Wang, Zhongyuan Lv (2018). A theory-based explicit calculation model for variable speed scroll compressors with vapor injection. International Journal of Refrigeration.DOI
  150. 常铮,林灵楠,丁国良(2017). 纳米制冷剂沸腾-冷凝交变过程中沉积纳米颗粒的再悬浮特性. 《上海市制冷学会2017年学术年会》.
  151. 鞠培玲,詹飞龙,庄大伟,丁国良,唐家俊(2017). 翅片管式空调蒸发器积灰过程的实验观察. 《上海市制冷学会2017年学术年会》.
  152. 常铮,林灵楠,丁国良(2017). 改性含油纳米制冷剂沸腾过程中纳米颗粒的油相迁移特性. 《上海市制冷学会2017年学术年会》.
  153. 曾宪顺,赵丹,丁国良(2017). 基于模块化仿真的酒柜均温设计方案与实验验证. 《制冷技术》.
  154. 杜心远,杨艺菲,丁国良,庄大伟(2017). 高热流密度两相流微通道换热器结构设计优化. 《上海市制冷学会2017年学术年会》.
  155. 丁超,胡海涛,丁国良(2017). 运行工况对LNG绕管式换热器壳侧两相流换热特性的影响. 《上海市制冷学会2017年学术年会》.
  156. 曾宪顺,赵丹,丁国良,丁剑波,李靖(2017). 改进间冷式酒柜内温度场均匀性的方案与效果. 《制冷学报》.
  157. 李剑锐,王皓显,武春林,陈慧,胡海涛,丁国良,邢占洋,王丽春(2017). 板翅式换热器微通道内汽化相变过程的数值模型. 《制冷技术》.
  158. 许旭东,赵丹,夏广辉,丁国良,胡海涛(2017). 冷柜门封吸合面水蒸气渗透速率的计算方法. 《制冷学报》.
  159. 吴静玮,孙浩然,张汝鸿,武春林,张志刚,陈慧,胡海涛,丁国良(2017). 多级导流封头对板翅式换热器内流量分配特性的影响分析. 《制冷技术》.
  160. 王婷婷,丁国良,段钟弟,任滔,陈杰,密晓光(2017). 基于仿真的LNG绕管式换热器设计方法. 《制冷技术》.
  161. 杨怀毅,任滔,丁国良(2017). 一种用于空调器系统仿真的高精度半经验压缩机模型. 《上海市制冷学会2017年学术年会》.
  162. 吴静玮,孙浩然,武春林,张志刚,陈慧,邢占洋,胡海涛,丁国良(2017). 板翅式换热器封头的数值模拟与结构优化. 《上海市制冷学会2017年学术年会论文集》.
  163. 鞠培玲,唐家俊,庄大伟,丁国良,申隽(2017). 析湿工况下管排数对翅片管换热器表面积灰影响的实验研究. 《制冷技术》.
  164. 王皓显,李剑锐,武春林,陈慧,张志刚,邢占洋,胡海涛,丁国良(2017). 板翅式换热器内流动沸腾特性的模拟分析. 《上海市制冷学会2017年学术年会论文集》.
  165. 赵丹,丁国良,徐言生(2017). 变径毛细管流量关联式开发. 《化工学报》.
  166. 盛伟,刘鹏鹏,丁国良(2017). 微通道换热器结霜性能的试验研究. 《流体机械》.
  167. 唐家俊,詹飞龙,胡海涛,丁国良,庄大伟(2017). 翅片结构对翅片管换热器积灰与压降影响的实验研究. 《制冷学报》.
  168. Guocheng Yang, Haitao Hu, Guoliang Ding, Jie Chen, Wengang Yang, Suyang Hu, Xiaodong Pang (2017). Experimental investigation on heat transfer characteristics of two-phase propane flow condensation in shell side of helically baffled shell-and-tube condenser. International Journal of Refrigeration.DOI
  169. Zhancheng Lai, Haitao Hu, Guoliang Ding, Xiaomin Weng (2017). Influence of pore density and porosity on the wet air flow in metal foam under different operation conditions. International Journal of Refrigeration.DOI
  170. Zhongdi Duan, Tao Ren, Guoliang Ding, Jie Chen, Xiaoguang Mi (2017). Liquid-migration based model for predicting the thermal performance of spiral wound heat exchanger for floating LNG. Applied Energy.DOI
  171. Chao Ding, Haitao Hu, Guoliang Ding, Jie Chen, Xiaoguang Mi, Sicong Yu, Jianrui Li (2017). Experimental investigation on downward flow boiling heat transfer characteristics of propane in shell side of LNG spiral wound heat exchanger. International Journal of Refrigeration.DOI
  172. Chao Ding, Haitao Hu, Guoliang Ding, Jie Chen, Xiaoguang Mi, Sicong Yu (2017). Experimental investigation on pressure drop characteristics of two-phase hydrocarbon mixtures flow in the shell side of LNG spiral wound heat exchangers. Applied Thermal Engineering.DOI
  173. Haoran Sun, Guoliang Ding, Haitao Hu, Tao Ren, Guanghui Xia, Guoming Wu (2017). A general simulation model for variable refrigerant flow multi-split air conditioning system based on graph theory. International Journal of Refrigeration.DOI
  174. Zhongdi Duan, Tao Ren, Guoliang Ding (2017). Experimental and modeling studies on the transient pressurization in response to boiloff vapor recondensation in liquefied gas storage tanks. Experimental Thermal and Fluid Science.DOI
  175. Hao Peng, Lingnan Lin, Guoliang Ding (2017). Influence of fluorinated self-assembled monolayer on wetting dynamics during evaporation of refrigerant–oil mixture on metal surface. International Journal of Refrigeration.DOI
  176. Haitao Hu, Zhancheng Lai, Guoliang Ding, Dawei Zhuang, Xiaomin Weng (2017). Experimental investigation on water drainage characteristics of open-cell metal foams with different wettabilities. International Journal of Refrigeration.DOI
  177. Chao Ding, Haitao Hu, Guoliang Ding, Jie Chen, Xiaoguang Mi, Sicong Yu (2017). Influences of tube pitches on heat transfer and pressure drop characteristics of two-phase propane flow boiling in shell side of LNG spiral wound heat exchanger. Applied Thermal Engineering.DOI
  178. Lingnan Lin, Hao Peng, Guoliang Ding (2017). Model for predicting particle size evolution during nanoparticle aggregation in refrigerant–oil mixture. International Journal of Heat and Mass Transfer.DOI
  179. Tingting Wang, Chao Ding, Guoliang Ding, Dan Hua Zhao, Tao Ren (2017). A fast calculation method of thermodynamic properties of variable-composition natural gas mixtures in the supercritical pressure region based on implicit curve-fitting. Journal of Natural Gas Science and Engineering.DOI
  180. Zhiqiang Li, Dan Hua Zhao, Guoliang Ding, Tao Ren, Songtao Miao, Xiaolei Han, Toshinori Noda (2017). Improving defrosting performance by controlling frost distribution to match defrosting heat distribution in frost-free household refrigerators. International Journal of Refrigeration.DOI
  181. Lingnan Lin, Hao Peng, Zheng Chang, Guoliang Ding (2017). Experimental investigation on TiO 2 nanoparticle migration from refrigerant–oil mixture to lubricating oil during refrigerant dryout. International Journal of Refrigeration.DOI
  182. Lingnan Lin, Hao Peng, Zheng Chang, Guoliang Ding (2017). Experimental research on degradation of nanolubricant–refrigerant mixture during continuous alternation processes of condensation and evaporation. International Journal of Refrigeration.DOI
  183. 高扬,翁晓敏,丁国良,胡海涛,宋吉,高屹峰(2016). 适合小管径空调器的分配器分流性能评价与结构优化. 《制冷学报》.
  184. 詹飞龙,唐家俊,丁国良,庄大伟(2016). 波纹翅片管换热器表面粉尘沉积特性的实验研究. 《制冷学报》.
  185. 吴国明,任滔,丁国良,成建宏(2016). 由早期性能标准的指标计算定频房间空调器APF的方法. 《制冷学报》.
  186. 唐家俊,詹飞龙,胡海涛,丁国良,庄大伟(2016). 开缝翅片管换热器表面积尘与压降特性的实验研究. 《制冷学报》.
  187. 杨丛彦,赵丹,丁国良,胡海涛(2016). 基于温度优先级的并联双蒸发器冰箱的控制策略. 《化工学报》.
  188. 许旭东,赵丹,丁国良,胡海涛(2016). 冰箱用微通道冷凝器分相集总参数模型. 《化工学报》.
  189. 庄大伟,杨艺菲,胡海涛,丁国良(2016). 竖直翅片间液桥体积计算模型. 《化工学报》.
  190. 赖展程,胡海涛,庄大伟,丁国良(2016). 泡沫金属结构对排水性能的影响. 《化工学报》.
  191. 翁晓敏,胡海涛,赖展程,庄大伟,丁国良(2016). 孔密度对泡沫金属内湿空气的换热与压降特性影响分析. 《化工学报》.
  192. 庄大伟,杨艺菲,胡海涛,丁国良(2016). 竖直平板间液桥形状的观测与预测模型开发. 《化工学报》.
  193. 翁晓敏,高扬,许旭东,庄大伟,胡海涛,丁国良(2016). 湿工况下泡沫金属内换热和压降的数值模拟和实验验证. 《化工学报》.
  194. 叶菁菁,胡海涛,丁国良,EIKEVIK Trygve Magne(2016). 太阳能辅助二氧化碳地源热泵系统的性能分析. 《制冷技术》.
  195. 唐家俊,詹飞龙,胡海涛,丁国良,庄大伟,申隽(2016). 管排数对翅片管换热器积灰及压降影响的实验研究. 《制冷技术》.
  196. 赖展程,李剑锐,胡海涛,庄大伟,翁晓敏,丁国良(2016). 印刷电路板式换热器Z型通道内制冷剂流动冷凝特性的数值模拟. 《制冷技术》.
  197. 庞晓冬,杨果成,陈杰,杨文刚,胡海涛,丁国良(2016). 丙烷在螺旋折流板管壳式换热器壳侧流动冷凝换热特性的实验研究. 《制冷技术》.
  198. 林灵楠,彭浩,丁国良,陆一凡(2016). 表面活性剂对纳米制冷剂颗粒团聚的影响. 《工程热物理学报》.
  199. 李智强,赵丹,丁国良,胡海涛,苗松涛,姚家前,野田俊典(2016). 间冷冰箱回风道的优化除霜设计. 《制冷学报》.
  200. 王康硕,任滔,丁国良,马南(2016). 浮式液化天然气用印刷板路换热器研究和应用进展. 《制冷学报》.
  201. Haitao Hu, Zhancheng Lai, Xiaomin Weng, Guoliang Ding, Dawei Zhuang (2016). Numerical model of dehumidifying process of wet air flow in open-cell metal foam. Applied Thermal Engineering.DOI
  202. Feilong Zhan, Dawei Zhuang, Guoliang Ding, Jiajun Tang (2016). Numerical model of particle deposition on fin surface of heat exchanger. International Journal of Refrigeration.DOI
  203. Yifei Yang, Dawei Zhuang, Guoliang Ding, Haitao Hu (2016). A mathematic model for predicting the volume of water bridge retaining between vertical fin surfaces. International Journal of Refrigeration.DOI
  204. Feilong Zhan, Jiajun Tang, Guoliang Ding, Dawei Zhuang (2016). Experimental investigation on particle deposition characteristics of wavy fin-and-tube heat exchangers. Applied Thermal Engineering.DOI
  205. Yifei Yang, Dawei Zhuang, Guoliang Ding, Haitao Hu (2016). Observation and description of the shape of water bridge retaining between vertical plane surfaces. International Journal of Refrigeration.DOI
  206. Zhongdi Duan, Tao Ren, Guoliang Ding, Jie Chen, Hui Pu (2016). A dynamic model for FLNG spiral wound heat exchanger with multiple phase-change streams based on moving boundary method. Journal of Natural Gas Science and Engineering.DOI
  207. Tingting Wang, Guoliang Ding, Tao Ren, Jie Chen, Hui Pu (2016). A mathematical model of floating LNG spiral-wound heat exchangers under rolling conditions. Applied Thermal Engineering.DOI
  208. Lingnan Lin, Hao Peng, Guoliang Ding (2016). Experimental research on particle aggregation behavior in nanorefrigerant–oil mixture. Applied Thermal Engineering.DOI
  209. 黄庆楠,陈杰,杨文刚,罗婷婷,丁国良,胡海涛(2015). 螺旋折流板管壳式换热器内LNG混合介质流动冷凝特性仿真平台开发及影响因素分析. 《制冷技术》.
  210. 唐家俊,詹飞龙,丁国良,庄大伟(2015). 波纹翅片管换热器表面粉尘沉积分布与沉积量的实验研究. 《上海市制冷学会第九届会员代表大会暨2015年学术年会》.
  211. 李剑锐,陈杰,浦晖,李恩道,丁国良,庄大伟,胡海涛(2015). 绕管式换热器壳侧降膜流动和相变传热的数值模拟. 《化工学报》.
  212. 段钟弟,任滔,丁国良,陈杰,浦晖,密晓光(2015). 分相的多股流LNG绕管式换热器动态模型. 《化工学报》.
  213. 翁晓敏,胡海涛,庄大伟,丁国良,许旭东,杨怀毅(2015). 湿空气在泡沫金属内析湿过程的换热与压降特性影响因素分析. 《化工学报》.
  214. 叶菁菁,胡海涛,丁国良,EIKEVIK Trygve Magne(2015). 带气冷器的二氧化碳地源热泵系统的性能分析. 《制冷技术》.
  215. 詹飞龙,丁国良,赵夫峰,张桃,赵恒谊,高屹峰(2015). 空调换热器长效性能衰减的研究进展. 《制冷学报》.
  216. 赵丹,丁国良,胡海涛(2015). 质量和能量严格守恒的蒸发器动态仿真模型. 《制冷学报》.
  217. 孙浩然,任滔,丁国良,宋吉,高屹峰(2015). 一种产品数据交互式的变频压缩机理论模型. 《制冷学报》.
  218. 万博闻,赵丹,丁国良(2015). 间冷冰箱风道系统流量分配特性的模块化计算方法. 《制冷学报》.
  219. Hao Peng, Lingnan Lin, Guoliang Ding (2015). Experimental research on wetting behavior of refrigerant–oil mixture on micro/nanostructured surface. International Journal of Refrigeration.DOI
  220. Haitao Hu, Xiaomin Weng, Dawei Zhuang, Guoliang Ding, Zhancheng Lai, Xudong Xu (2015). Heat transfer and pressure drop characteristics of wet air flow in metal foam under dehumidifying conditions. Applied Thermal Engineering.DOI
  221. Yu Mei Zhu, Haitao Hu, Shuo Sun, Guoliang Ding (2015). Flow boiling of refrigerant in horizontal metal-foam filled tubes: Part 2 – A flow-pattern based prediction method for heat transfer. International Journal of Heat and Mass Transfer.DOI
  222. Yu Zhu, Haitao Hu, Shuo Sun, Guoliang Ding (2015). Flow boiling of refrigerant in horizontal metal-foam filled tubes: Part 1 – Two-phase flow pattern visualization. International Journal of Heat and Mass Transfer.DOI
  223. Dawei Zhuang, Guoliang Ding, Haitao Hu, H. Fujino, Satoshi Inoue (2015). Condensing droplet behaviors on fin surface under dehumidifying condition. Part II: Experimental validation. Applied Thermal Engineering.DOI
  224. Dawei Zhuang, Guoliang Ding, Haitao Hu, H. Fujino, Satoshi Inoue (2015). Condensing droplet behaviors on fin surface under dehumidifying condition. Applied Thermal Engineering.DOI
  225. Tingting Wang, Guoliang Ding, Zhongdi Duan, Tao Ren, Jie Chen, Hui Pu (2015). A distributed-parameter model for LNG spiral wound heat exchanger based on graph theory. Applied Thermal Engineering.DOI
  226. Haitao Hu, Trygve Magne Eikevik, Petter Nekså, Armin Hafner, Guoliang Ding, Qingnan Huang, Jingjing Ye (2015). Performance analysis of an R744 ground source heat pump system with air-cooled and water-cooled gas coolers. International Journal of Refrigeration.DOI
  227. Lingnan Lin, Hao Peng, Guoliang Ding (2015). Influence of oil concentration on wetting behavior during evaporation of refrigerant–oil mixture on copper surface. International Journal of Refrigeration.DOI
  228. Lingnan Lin, Hao Peng, Guoliang Ding (2015). Dispersion stability of multi-walled carbon nanotubes in refrigerant with addition of surfactant. Applied Thermal Engineering.DOI
  229. Hao Peng, Lingnan Lin, Guoliang Ding (2015). Influences of primary particle parameters and surfactant on aggregation behavior of nanoparticles in nanorefrigerant. Energy.DOI
  230. 刘永辉,王晶,李标,丁国良(2014). 基于CFD技术的大容量风冷冰箱流场分析及改进设计. 《流体机械》.
  231. 张如许,魏文建,胡海涛,丁国良,李剑锐(2014). 单相流体在点波板式换热器内流动与换热的数值模拟. 《制冷技术》.
  232. 许旭东,胡海涛,杨怀毅,翁晓敏,庄大伟,丁国良(2014). 析湿工况下泡沫金属内湿空气传热传质特性的实验研究. 《制冷技术》.
  233. 孙浩然,任滔,丁国良,宋吉,高屹峰(2014). 一种基于产品实验数据的空调仿真用变频压缩机模型. 《2014年中国家用电器技术大会论文集》.
  234. 张如许,胡海涛,庄大伟,丁国良,向量,魏文建(2014). 板式换热器内两相流流量分配的模拟及实验验证. 《上海交通大学学报》.
  235. 胡海涛,朱禹,彭浩,丁国良,孙硕(2014). 泡沫金属管内含油制冷剂流动沸腾的压降特性. 《化工学报》.
  236. 杨艺菲,庄大伟,胡海涛,韩维哲,丁国良,熊伟(2014). 湿工况下平翅片平面凝水形成及运动过程的数值模拟与实验验证. 《化工学报》.
  237. Haitao Hu, Ruxu Zhang, Dawei Zhuang, Guoliang Ding, Wenjian Wei, Liang Xiang (2014). Numerical model of two-phase refrigerant flow distribution in a plate evaporator with distributors. Applied Thermal Engineering.DOI
  238. Haitao Hu, Jingdan Gao, Guoliang Ding, Yifeng Gao, Ji Song (2014). Fin design for an evaporator with small diameter microgroove tubes. Science and Technology for the Built Environment.DOI
  239. Dawei Zhuang, Haitao Hu, Guoliang Ding, Guannan Xi, Weizhe Han (2014). Numerical model for liquid droplet motion on vertical plain-fin surface. Science and Technology for the Built Environment.DOI
  240. Haitao Hu, Yu Mei Zhu, Hao Peng, Guoliang Ding, Shuo Sun (2014). Influence of tube diameter on heat transfer characteristics of refrigerant-oil mixture flow boiling in metal-foam filled tubes. International Journal of Refrigeration.DOI
  241. Tao Ren, Amir Chavoshi, Guoliang Ding, Pega Hrnjak (2014). Single phase pressure drop in round cylindrical headers of parallel flow MCHXs. Purdue e-Pubs (Purdue University System).
  242. Dan Hua Zhao, Guoliang Ding, Yansheng Xu, Shizhi Zou (2014). Development of a stepped capillary tube as a low cost throttling device for a residential heat pump system. International Journal of Refrigeration.DOI
  243. 熊伟,庄大伟,胡海涛,丁国良(2013). 湿工况下翅片管换热器空气侧热质传递动态模拟. 《制冷技术》.
  244. 高晶丹,丁国良,吴伟,高屹峰,宋吉(2013). 空调用5mm管翅式管换热器的翅片设计与实验研究. 《2013年中国家用电器技术大会》.
  245. 孙浩然,段钟弟,丁国良(2013). 采用适用于小管径空调器关联式的换热器仿真软件开发. 《上海市制冷学会2013年学术年会》.
  246. 韩维哲,丁国良,胡海涛,庄大伟(2013). 湿工况下翅片管换热器空气侧热质传递的数值模型. 《上海交通大学学报》.
  247. 胡海涛,朱禹,丁国良,孙硕(2013). 含油制冷剂在泡沫金属圆管内流动沸腾的换热特性. 《制冷学报》.
  248. 赵丹,丁国良,任滔(2013). 非绝热毛细管快速计算方法. 《制冷学报》.
  249. 熊伟,庄大伟,胡海涛,丁国良,喜冠南(2013). 湿工况下翅片表面冷凝水滴运动的数值模型. 《制冷学报》.
  250. 张如许,丁国良,胡海涛,庄大伟,向量,魏文建(2013). 板式换热器内两相流动分配的数学模型. 《勇于创新,服务发展——2013中国制冷学会学术年会》.
  251. 丁国良,彭浩,胡海涛,庄大伟(2013). 含油纳米制冷剂沸腾中碳纳米管的相间迁移机制. 《工程热物理学报》.
  252. Haitao Hu, Yu Mei Zhu, Hao Peng, Guoliang Ding, Shuo Sun (2013). Effect of tube diameter on pressure drop characteristics of refrigerant–oil mixture flow boiling inside metal-foam filled tubes. Applied Thermal Engineering.DOI
  253. Yu Mei Zhu, Haitao Hu, Shuo Sun, Guoliang Ding (2013). Heat transfer measurements and correlation of refrigerant flow boiling in tube filled with copper foam. International Journal of Refrigeration.DOI
  254. Guoliang Ding (2013). Dynamic Simulation of Heat and Mass Transfer Characteristics for Tube-finned Heat Exchangers under Dehumidifying Conditions. Chinese Journal of Refrigeration Technology.
  255. Tao Ren, Guoliang Ding, Tingting Wang, Haitao Hu (2013). A general three-dimensional simulation approach for micro-channel heat exchanger based on graph theory. Applied Thermal Engineering.DOI
  256. 胡海涛,黄翔超,丁国良,邓斌,郑永新,高屹峰,宋吉(2012). 润滑油对小管径强化管内R410A流动冷凝压降特性的影响. 《上海交通大学学报》.
  257. 丁国良,彭浩,胡海涛,庄大伟(2012). 含油纳米制冷剂沸腾中气相与液相之间球形纳米颗粒的迁移特性. 《上海交通大学学报》.
  258. 柴婷,胡海涛,丁国良(2012). 四通换向阀中采用新型材料的节能效果. 《制冷学报》.
  259. 高晶丹,丁国良,吴伟,高屹峰,宋吉,刘忠民,陈绍楷(2012). R290空调小管径翅片管换热器的设计方法. 《2012年中国家用电器技术大会》.
  260. 任滔,丁国良,王婷婷(2012). 制冷剂-空气热交换器集成式数字化设计软件. 《制冷学报》.
  261. 林恩新,丁国良,赵丹,胡海涛(2012). 适用于制冷系统动态仿真的全封闭式压缩机准动态模型. 《制冷学报》.
  262. 韩维哲,丁国良,胡海涛,庄大伟(2012). 湿工况下翅片管式换热器中刘易斯因子的数值研究. 《制冷学报》.
  263. 高晶丹,丁国良,吴伟,胡海涛,高屹峰,宋吉(2012). 采用窗片的5 mm管换热器在湿工况下换热性能的实验研究. 《制冷技术》.
  264. 林恩新,丁国良,胡海涛,赵丹(2012). 空冷式换热器中两相制冷剂质量的新计算模型. 《制冷学报》.
  265. 高晶丹,吴伟,丁国良,高屹峰,宋吉(2012). 空调器用小管径翅片管蒸发器的优化设计方法. 《化工学报》.
  266. 孙硕,胡海涛,丁国良,朱禹(2012). 泡沫金属对圆管内R410A流动沸腾压降特性的影响. 《化工学报》.
  267. 于楠,赵丹,丁国良,胡海涛(2012). 多类型冰箱的集成式仿真设计平台. 《制冷学报》.
  268. 丁国良,彭浩,胡海涛(2012). 含油纳米制冷剂沸腾中纳米颗粒相间迁移机制. 《工程热物理学报》.
  269. 胡海涛,朱禹,孙硕,丁国良,庄大伟,景尧龙(2012). 泡沫金属对含油制冷剂管内流动沸腾换热特性的影响. 《工程热物理学报》.
  270. Haitao Hu, Hao Peng, Guoliang Ding (2012). Nucleate pool boiling heat transfer characteristics of refrigerant/nanolubricant mixture with surfactant. International Journal of Refrigeration.DOI
  271. Haitao Hu, Yu Mei Zhu, Guoliang Ding, Shuo Sun (2012). Effect of oil on two-phase pressure drop of refrigerant flow boiling inside circular tubes filled with metal foam. International Journal of Refrigeration.DOI
  272. Yu Mei Zhu, Haitao Hu, Guoliang Ding, Shuo Sun, Yaolong Jing (2012). Influence of metal foam on heat transfer characteristics of refrigerant-oil mixture flow boiling inside circular tubes. Applied Thermal Engineering.DOI
  273. Guoliang Ding, TAO REN, YONGXIN ZHENG, Yifeng Gao, Ji Song (2012). SIMULATION-BASED DESIGN METHOD FOR ROOM AIR CONDITIONER WITH SMALLER DIAMETER COPPER TUBES. International Journal of Air-Conditioning and Refrigeration.DOI
  274. Yu Mei Zhu, Haitao Hu, Guoliang Ding, Dawei Zhuang, Hao Peng (2012). Heat transfer enhancement by metal foam during nucleate pool boiling of refrigerant/oil mixture at a wide range of oil concentration. Science and Technology for the Built Environment.DOI
  275. Guoliang Ding (2012). Optimization Design of Reversing Valve Based on Heat Loss Analysis. Chinese Journal of Refrigeration Technology.
  276. 庄大伟,彭浩,胡海涛,丁国良,朱禹(2011). 基于碳纳米管的含油纳米制冷剂核态池沸腾换热特性. 《制冷学报》.
  277. 庄大伟,彭浩,胡海涛,丁国良,朱禹(2011). 含油金刚石纳米制冷剂的核态池沸腾换热特性. 《上海交通大学学报》.
  278. 胡海涛,朱禹,丁国良,彭浩,庄大伟(2011). 高浓度润滑油对泡沫金属池沸腾特性的影响. 《工程热物理学报》.
  279. 丁国良,彭浩,胡海涛(2011). 含油纳米制冷剂沸腾中纳米颗粒相间迁移特性预测模型. 《工程热物理学报》.
  280. 余克志,丁国良,陈天及(2011). 卧式陈列柜风幕热卷吸系数的关联式模型. 《上海交通大学学报》.
  281. 吴照国,任滔,丁国良,胡海涛,郑永新,高屹峰(2011). 房间空调器缩小换热器管径的表面反应设计方法. 《制冷学报》.
  282. 韩维哲,丁国良,庄大伟,胡海涛(2011). 翅片管式换热器在析湿过程中热质传递的数值模型开发. 《上海市制冷学会2011年学术年会论文集》.
  283. 余克志,丁国良,陈天及(2011). 陈列柜及风幕数值模拟的研究进展. 《制冷学报》.
  284. 汤志远,丁国良(2011). 涡旋式水源热泵系统性能仿真. 《制冷学报》.
  285. 任滔,丁国良,王婷婷(2011). 一种通用的制冷剂-空气换热器三维分布参数仿真设计工具. 《走中国创造之路——2011中国制冷学会学术年会论文集》.
  286. 林恩新,丁国良,赵丹,胡海涛(2011). 基于双膜理论润滑油溶解制冷剂质量计算模型. 《流体机械》.
  287. 朱禹,胡海涛,丁国良,彭浩,黄翔超,庄大伟,俞钧(2011). 制冷剂/油在泡沫金属加热表面池沸腾换热特性. 《化工学报》.
  288. Hao Peng, Guoliang Ding, Haitao Hu (2011). Influences of refrigerant-based nanofluid composition and heating condition on the migration of nanoparticles during pool boiling. Part I: Experimental measurement. International Journal of Refrigeration.DOI
  289. Hao Peng, Guoliang Ding, Haitao Hu (2011). Influences of refrigerant-based nanofluid composition and heating condition on the migration of nanoparticles during pool boiling. Part II: Model development and validation. International Journal of Refrigeration.DOI
  290. Weizhe Han, Khaled Saleh, Vikrant Aute, Guoliang Ding, Yunho Hwang, Reinhard Radermacher (2011). Numerical simulation and optimization of single-phase turbulent flow in chevron-type plate heat exchanger with sinusoidal corrugations. Science and Technology for the Built Environment.DOI
  291. Kezhi Yu, Tianji Chen, Guoliang Ding (2011). CFD simulation in a vertical display cabinet with environment air supply. International Conference on Computer Research and Development.DOI
  292. Hao Peng, Guoliang Ding, Haitao Hu, Weiting Jiang (2011). Effect of nanoparticle size on nucleate pool boiling heat transfer of refrigerant/oil mixture with nanoparticles. International Journal of Heat and Mass Transfer.DOI
  293. Hao Peng, Guoliang Ding, Haitao Hu (2011). Effect of surfactant additives on nucleate pool boiling heat transfer of refrigerant-based nanofluid. Experimental Thermal and Fluid Science.DOI
  294. Haitao Hu, Guoliang Ding, Xiangchao Huang, Bin Deng, Yifeng Gao (2011). EXPERIMENTAL INVESTIGATION AND CORRELATION OF TWO-PHASE HEAT TRANSFER OF R410A/OIL MIXTURE FLOW BOILING IN A 5-MM MICROFIN TUBE. Enhanced heat transfer/Journal of enhanced heat transfer.DOI
  295. Lin Enxin, Guoliang Ding, Dan Hua Zhao, Yunhu Liao, Nan Yu, Jun Yamashita (2011). Dynamic model for multi-compartment indirect cooling household refrigerator using Z-transfer function based cabinet model. International Journal of Thermal Sciences.DOI
  296. Hao Peng, Guoliang Ding, Haitao Hu (2011). Migration of carbon nanotubes from liquid phase to vapor phase in the refrigerant-based nanofluid pool boiling. Nanoscale Research Letters.DOI
  297. 胡海涛,黄翔超,丁国良,邓斌,高屹峰(2010). 小管径强化管内R410A-油混合物流动沸腾阻力特性. 《上海交通大学学报》.
  298. 黄翔超,胡海涛,丁国良,朱禹,邓斌,高屹峰(2010). 润滑油对R410A在小管径水平光管内流动冷凝摩擦压降的影响. 《上海交通大学学报》.
  299. 朱禹,胡海涛,丁国良(2010). 泡沫金属内流体流动沸腾热质传递过程的模拟. 《化工学报》.
  300. 余克志,陈天及,丁国良,谢堃,方恒和,刘添(2010). 集中送风式陈列柜的节能策略. 《节能技术》.
  301. 杨康骏,丁国良,浦晖,朱禹,胡海涛(2010). 水平气流下竖直孔内IPA蒸发速率的实验研究. 《上海交通大学学报》.
  302. 丁国良,姜未汀,彭浩,胡海涛(2010). 一种纳米流体热导率通用模型. 《工程热物理学报》.
  303. 浦晖,丁国良,胡海涛,高屹峰(2010). 盐雾腐蚀对铜翅片换热器空气侧压降特性的影响. 《上海交通大学学报》.
  304. Yu Mei Zhu, Haitao Hu, Guoliang Ding, Hao Peng, Xiangchao Huang, Dawei Zhuang, Yu Jun (2010). Influence of oil on nucleate pool boiling heat transfer of refrigerant on metal foam covers. International Journal of Refrigeration.DOI
  305. Weizhe Han, Guoliang Ding, Tao Ren (2010). Numerical Modeling of Refrigerants Flowing through Short Tube Orifices. Science and Technology for the Built Environment.DOI
  306. Hao Peng, Guoliang Ding, Haitao Hu, Weiting Jiang (2010). Influence of carbon nanotubes on nucleate pool boiling heat transfer characteristics of refrigerant–oil mixture. International Journal of Thermal Sciences.DOI
  307. Hui Pu, Guoliang Ding, Haitao Hu, Yifeng Gao (2010). Effect of salt spray corrosion on air-side hydrophilicity and thermal-hydraulic performance of copper-fin heat exchangers. Heat and Mass Transfer.DOI
  308. Xiangchao Huang, Guoliang Ding, Haitao Hu, Yu Mei Zhu, Yifeng Gao, Bin Deng (2010). Flow condensation pressure drop characteristics of R410A–oil mixture inside small diameter horizontal microfin tubes. International Journal of Refrigeration.DOI
  309. Hui Pu, Guoliang Ding, Haitao Hu, Yifeng Gao (2010). Effect of Salt Spray Corrosion on Air-Side Performance of Finned-Tube Heat Exchanger with Hydrophilic Coating Under Dehumidifying Conditions. Science and Technology for the Built Environment.DOI
  310. Haitao Hu, Guoliang Ding, Wenjian Wei, Xiangchao Huang, Zhence Wang (2010). Heat transfer characteristics of refrigerant-oil mixtures flow boiling in a horizontal C-shape curved smooth tube. International Journal of Refrigeration.DOI
  311. Xiangchao Huang, Guoliang Ding, Haitao Hu, Yu Mei Zhu, Yifeng Gao, Bin Deng (2010). Condensation heat transfer characteristics of R410A–oil mixture in 5mm and 4mm outside diameter horizontal microfin tubes. Experimental Thermal and Fluid Science.DOI
  312. Ping Zhang, Guoliang Ding (2010). Predictor-corrector algorithm for solving quasi-separated-flow and transient distributed-parameter model for heat exchangers. Frontiers of Energy and Power Engineering in China.DOI
  313. Xiangchao Huang, Guoliang Ding, Haitao Hu, Yu Mei Zhu, Yifeng Gao, Bin Deng (2010). Two-Phase Frictional Pressure Drop Characteristics of R410A-Oil Mixture Flow Condensation inside 4.18 mm and 1.6 mm I.D. Horizontal Smooth Tubes. Science and Technology for the Built Environment.DOI
  314. Hao Peng, Guoliang Ding, Haitao Hu, Weiting Jiang, Dawei Zhuang, Kaijian Wang (2010). Erratum to “Nucleate pool boiling heat transfer characteristics of refrigerant/oil mixture with diamond nanoparticles” [International Journal of Refrigeration 33 (2) (2010) 347–358]. International Journal of Refrigeration.DOI
  315. Yifeng Gao, Bin Deng, Guoliang Ding, Haitao Hu, Xiangchao Huang (2010). PRESSURE DROP CHARACTERISTICS OF R410A-OIL MIXTURE FLOW BOILING IN SMALL SMOOTH TUBES. International Journal of Air-Conditioning and Refrigeration.DOI
  316. 彭浩,丁国良,姜未汀,高屹峰(2009). 纳米制冷剂沸腾过程中纳米颗粒的迁移特性. 《上海交通大学学报》.
  317. 汤志远,丁国良(2009). 采用板式换热器的水源热泵系统性能仿真. 《上海市制冷学会2009年学术年会》.
  318. 任凡,丁国良,黄翔超,朱禹,胡海涛,邓斌,高屹峰(2009). R410A/润滑油混合物在5mm水平强化管内的流动冷凝换热特性. 《上海交通大学学报》.
  319. 张平,丁国良,刘焘,吴志刚(2009). 换热器管路布置的直接数学描述方法. 《上海交通大学学报》.
  320. 丁国良,彭浩,姜未汀,胡海涛,高屹峰(2009). 润滑油对纳米颗粒在纳米制冷剂相变过程中迁移的影响. 《工程热物理学报》.
  321. 张平,丁国良(2009). 基于分布参数模型的换热器瞬态仿真改进算法. 《制冷学报》.
  322. 汤志远,丁国良,胡海涛(2009). 我国地源热泵技术研究进展和产业发展探讨. 《制冷技术》.
  323. Xiangchao Huang, Guoliang Ding, Haitao Hu, Yu Mei Zhu, Hao Peng, Yifeng Gao, Bin Deng (2009). Influence of oil on flow condensation heat transfer of R410A inside 4.18mm and 1.6mm inner diameter horizontal smooth tubes. International Journal of Refrigeration.DOI
  324. Guoliang Ding, Haitao Hu (2009). Answer to comments by M.M. Awad on “Experimental investigation and correlation of two-phase frictional pressure drop of R410A-oil mixture flow boiling in a 5 mm microfin tube”. International Journal of Refrigeration.DOI
  325. Dan Hua Zhao, Guoliang Ding, Zhigang Wu (2009). Extension of the implicit curve-fitting method for fast calculation of thermodynamic properties of refrigerants in supercritical region. International Journal of Refrigeration.DOI
  326. Weiting Jiang, Guoliang Ding, Hao Peng, Yifeng Gao, Kaijian Wang (2009). Experimental and Model Research on Nanorefrigerant Thermal Conductivity. Science and Technology for the Built Environment.DOI
  327. Hao Peng, Guoliang Ding, Haitao Hu, Weiting Jiang, Dawei Zhuang, Kaijian Wang (2009). Nucleate pool boiling heat transfer characteristics of refrigerant/oil mixture with diamond nanoparticles. International Journal of Refrigeration.DOI
  328. Hui Pu, Guoliang Ding, Xiaokui Ma, Haitao Hu, Yifeng Gao (2009). Long-term performance of air-side heat transfer and pressure drop for finned tube evaporators of air conditioners under intermittent operation conditions. International Journal of Refrigeration.DOI
  329. Haitao Hu, Guoliang Ding (2009). Answer to comments by M.M. Awad on “Measurement and correlation of frictional two-phase pressure drop of R410A/POE oil mixture flow boiling in a 7mm straight micro-fin tube”. Applied Thermal Engineering.DOI
  330. Hao Peng, Guoliang Ding, Weiting Jiang, Haitao Hu, Yifeng Gao (2009). Measurement and correlation of frictional pressure drop of refrigerant-based nanofluid flow boiling inside a horizontal smooth tube. International Journal of Refrigeration.DOI
  331. Kezhi Yu, Guoliang Ding, Tianji Chen (2009). Experimental investigation on a vertical display cabinet with central air supply. Energy Conversion and Management.DOI
  332. Xiaokui Ma, Guoliang Ding, Yuanming Zhang, Kaijian Wang (2009). Airside characteristics of heat, mass transfer and pressure drop for heat exchangers of tube-in hydrophilic coating wavy fin under dehumidifying conditions. International Journal of Heat and Mass Transfer.DOI
  333. Haitao Hu, Guoliang Ding, Xiangchao Huang, Bin Deng, Yifeng Gao (2009). Pressure drop during horizontal flow boiling of R410A/oil mixture in 5mm and 3mm smooth tubes. Applied Thermal Engineering.DOI
  334. Kezhi Yu, Guoliang Ding, Tianji Chen (2009). A correlation model of thermal entrainment factor for air curtain in a vertical open display cabinet. Applied Thermal Engineering.DOI
  335. Hao Peng, Guoliang Ding, Weiting Jiang, Haitao Hu, Yifeng Gao (2009). Heat transfer characteristics of refrigerant-based nanofluid flow boiling inside a horizontal smooth tube. International Journal of Refrigeration.DOI
  336. Xiaokui Ma, Guoliang Ding, Yuanming Zhang (2009). Experimental study of the airside performance for interrupted fin-and-tube heat exchanger with hydrophilic coating under dehumidifying conditions. Journal of Shanghai Jiaotong University (Science).DOI
  337. Xiaokui Ma, Guoliang Ding, Ping Zhang, Weizhe Han, Shinichi Kasahara, Takahiro Yamaguchi (2009). Experimental validation of void fraction models for R410A air conditioners. International Journal of Refrigeration.DOI
  338. Weiting Jiang, Guoliang Ding, Hao Peng, Haitao Hu (2009). Modeling of nanoparticles’ aggregation and sedimentation in nanofluid. Current Applied Physics.DOI
  339. Hui Pu, Guoliang Ding, Xiaokui Ma, Haitao Hu, Yifeng Gao (2009). Air-side heat transfer and friction characteristics of biofouled evaporator under wet conditions. Frontiers of Energy and Power Engineering in China.DOI
  340. 彭浩,丁国良,姜未汀,胡海涛,高屹峰(2008). 纳米制冷剂管内流动沸腾换热特性. 《化工学报》.
  341. 胡海涛,丁国良,王凯建(2008). R410A-油混合物在7mm强化管内流动沸腾的换热特性. 《化工学报》.
  342. 陆雪军,孙文喆,丁国良(2008). 风冷热泵涡旋压缩机防护分析. 《制冷技术》.
  343. 尹斌,丁国良,韦英奇(2008). 热泵机毛细管数值计算方法研究. 《第十三届全国热泵与系统节能技术大会》.
  344. 赵丹,吴志刚,丁国良(2008). 超临界区制冷剂热力性质快速计算方法. 《工程热物理学报》.
  345. 赵丹,吴志刚,丁国良(2008). 超临界CO2热力性质及迁移性质快速计算方法. 《上海交通大学学报》.
  346. 胡海涛,丁国良,黄翔超,邓斌,高屹峰(2008). R410A-油在5mm小管径光管内流动沸腾的阻力特性. 《上海交通大学学报》.
  347. 廖云虎,丁国良,林恩新,黄兴华(2008). 翅片管换热器结霜过饱和模型. 《上海交通大学学报》.
  348. 浦晖,丁国良,马小魁,高屹峰(2008). 微生物污垢对翅片管换热器空气侧换热和压降特性的影响. 《上海交通大学学报》.
  349. 魏文建,丁国良,王凯建(2008). 润滑油的混入对翅片管式空调蒸发器性能影响. 《上海交通大学学报》.
  350. 余克志,丁国良,陈天及(2008). 立式陈列柜风幕数值模拟的双流体模型及其改进. 《上海交通大学学报》.
  351. 黄冬平,丁国良,QUACK Hans(2008). CO2通过安全阀排放流动分析. 《上海交通大学学报》.
  352. 刘焘,丁国良,张平,吴志刚(2008). 套管换热器近分相流动态分布参数模型的改进算法. 《上海交通大学学报》.
  353. Weijiang Zhang, Chun‐Lu Zhang, Guoliang Ding (2008). Transient modeling of an air-cooled chiller with economized compressor. Part I: Model development and validation. Applied Thermal Engineering.DOI
  354. Weiting Jiang, Guoliang Ding, Hao Peng (2008). Measurement and model on thermal conductivities of carbon nanotube nanorefrigerants. International Journal of Thermal Sciences.DOI
  355. Weijiang Zhang, Chun‐Lu Zhang, Guoliang Ding (2008). On three forms of momentum equation in transient modeling of residential refrigeration systems. International Journal of Refrigeration.DOI
  356. Haitao Hu, Guoliang Ding, Wenjian Wei, Zhence Wang, Kaijian Wang (2008). Measurement and Correlation of Frictional Pressure Drop of R-410A/Oil Mixture Flow Boiling in a 7 mm Straight Smooth Tube. Science and Technology for the Built Environment.DOI
  357. Guoliang Ding, Haitao Hu, Xiangchao Huang, Bin Deng, Yifeng Gao (2008). Experimental investigation and correlation of two-phase frictional pressure drop of R410A–oil mixture flow boiling in a 5mm microfin tube. International Journal of Refrigeration.DOI
  358. Huang Dongping, Guoliang Ding, Hans H. Quack (2008). New refrigeration system using CO2 vapor-solid as refrigerant. Frontiers of Energy and Power Engineering in China.DOI
  359. Guoliang Ding, Xiaokui Ma, Ping Zhang, Weizhe Han, Shinichi Kasahara, Takahiro Yamaguchi (2008). Practical methods for measuring refrigerant mass distribution inside refrigeration system. International Journal of Refrigeration.DOI
  360. Hui Pu, Guoliang Ding, Xiaokui Ma, Haitao Hu, Yifeng Gao (2008). Effects of biofouling on air-side heat transfer and pressure drop for finned tube heat exchangers. International Journal of Refrigeration.DOI
  361. Guoliang Ding, Hao Peng, Weiting Jiang, Yifeng Gao (2008). The migration characteristics of nanoparticles in the pool boiling process of nanorefrigerant and nanorefrigerant–oil mixture. International Journal of Refrigeration.DOI
  362. Wenjian Wei, Guoliang Ding, Haitao Hu, Kaijian Wang (2008). Models of thermodynamic and transport properties of POE VG68 and R410A/POE VG68 mixture. Frontiers of Energy and Power Engineering in China.DOI
  363. Huang Dongping, Guoliang Ding, Hans H. Quack (2008). Lagrangian simulation of deposition of CO2 gas-solid sudden expansion flow. Frontiers of Energy and Power Engineering in China.DOI
  364. Zhigang Wu, Guoliang Ding, KaiJian Wang, Masaharu Fukaya (2008). Knowledge-Based Evolution Method for Optimizing Refrigerant Circuitry of Fin-and-Tube Heat Exchangers. Science and Technology for the Built Environment.DOI
  365. Haitao Hu, Guoliang Ding, Kaijian Wang (2008). Heat transfer characteristics of R410A–oil mixture flow boiling inside a 7mm straight microfin tube. International Journal of Refrigeration.DOI
  366. Guoliang Ding (2008). Modeling of Minimum Refrigerant Velocity for Oil Return and Application in Designing Vertical Suction Pipes. Chinese Journal of Mechanical Engineering.
  367. 吴志刚,丁国良,浦晖,龙慧芳(2007). 基于遗传算法的翅片管换热器管路优化方法. 《化工学报》.
  368. 马小魁,丁国良,张圆明(2007). 析湿工况下亲水层对波纹翅片管换热器空气侧特性的影响分析. 《化工学报》.
  369. 黄冬平,丁国良,H.Quack(2007). CO2安全阀排放管道堵塞后融化过程模拟. 《化工学报》.
  370. 魏文建,丁国良,胡海涛,王凯建(2007). R410A制冷剂和POE VG68润滑油混合物热物性模型. 《制冷学报》.
  371. 尹斌,丁国良,欧阳惕(2007). 蒸发器建模仿真与试验的比较. 《制冷学报》.
  372. 张圆明,丁国良,马小魁(2007). 带亲水层波纹翅片管换热器空气侧特性的参数影响分析. 《制冷学报》.
  373. 余克志,丁国良,陈天及(2007). 基于双流体模型的立式陈列柜风幕风口模型. 《制冷学报》.
  374. 廖云虎,丁国良,林恩新,黄兴华(2007). 间冷式冰箱蒸发器结霜模拟. 《制冷学报》.
  375. 马小魁,丁国良,张圆明(2007). 析湿工况下亲水层对开缝翅片管换热器空气侧换热压降特性影响分析. 《上海交通大学学报》.
  376. 胡海涛,丁国良,魏文建,汪振策,王凯建(2007). R410A-油混合物在7mm水平直光管内流动沸腾的换热特性 Ⅰ.实验研究. 《上海交通大学学报》.
  377. 胡海涛,丁国良,魏文建,汪振策,王凯建(2007). R410A-油混合物在7mm水平直光管内流动沸腾的换热特性 Ⅱ.关联式. 《上海交通大学学报》.
  378. 姜未汀,丁国良,王凯建,高屹峰(2007). 一种基于透射比的纳米流体颗粒团聚定量分析方法. 《上海交通大学学报》.
  379. 刘焘,张平,丁国良(2007). 套管换热器动态分布参数模型的改进算法. 《上海市制冷学会2007年学术年会论文集》.
  380. 刘焘,张平,丁国良(2007). 基于分布参数模型的翅片管换热器动态仿真算法. 《上海市制冷学会2007年学术年会论文集》.
  381. 廖云虎,丁国良,林恩新,黄兴华(2007). 翅片管换热器结霜性能仿真研究. 《上海市制冷学会2007年学术年会论文集》.
  382. 汪振策,丁国良,胡海涛,王凯建(2007). R410A-油在7mm C形光管流动沸腾的压降特性. 《上海交通大学学报》.
  383. 胡海涛,丁国良,汪振策,魏文建,王凯建(2007). R410A-油在Φ7mm水平直强化管内流动沸腾阻力特性. 《上海交通大学学报》.
  384. 魏文建,丁国良,王凯建(2007). 含油制冷剂在小管径换热管内流动沸腾换热关联式. 《上海交通大学学报》.
  385. 黄冬平,丁国良,QUACK Hans(2007). 基于拉格朗日模型的CO2气固两相圆管内突扩流动沉积特性分析. 《上海交通大学学报》.
  386. 黄冬平,丁国良,QUACK Hans(2007). CO2蒸气固体颗粒制冷系统. 《上海交通大学学报》.
  387. 尹斌,丁国良,欧阳惕(2007). R134a单元机的绝热毛细管实用关联式研究. 《流体机械》.
  388. 马小魁,丁国良,张平,张圆明(2007). R410A空调器空泡系数模型适用性的实验验证. 《上海交通大学学报》.
  389. 马小魁,丁国良,张圆明(2007). 带亲水层条缝型翅片管换热器析湿工况空气侧换热与压降特性. 《高校化学工程学报》.
  390. 丁国良,吴志刚(2007). 覆盖亚临界到临界区的制冷工质物性快速算法. 《工程热物理学报》.
  391. 丁国良,姜未汀,王凯建,高屹峰(2007). 基于团聚理论的纳米制冷剂导热系数预测方法. 《工程热物理学报》.
  392. 吴志刚,丁国良,浦晖(2007). 基于知识及遗传退火混合算法的翅片管换热器管路优化方法. 《化工学报》.
  393. 胡海涛,丁国良,汪振策,魏文建(2007). R410A-油混合物在7mm直强化管和C形强化管内流动沸腾的摩擦压降特性. 《化工学报》.
  394. 马小魁,丁国良,张圆明(2007). 析湿工况下带亲水层开缝翅片管换热器空气侧传热传质特性. 《化工学报》.
  395. Wenjian Wei, Guoliang Ding, Kaijian Wang (2007). Measurement and Correlation of Two-Phase Frictional Performance of Refrigerant-Oil Mixtures Inside Small Tubes. Science and Technology for the Built Environment.DOI
  396. Guoliang Ding (2007). Recent developments in simulation techniques for vapour-compression refrigeration systems. International Journal of Refrigeration.DOI
  397. Huang Dongping, Guoliang Ding, Hans H. Quack (2007). Experimental Observation and Empirical Estimation of Formation of Solid Carbon Dioxide in Safety Valves for Refrigerating System. Science and Technology for the Built Environment.DOI
  398. Guoliang Ding, Weiting Jiang, Yifeng Gao (2007). A Prediction Method for Thermal Conductivity and Electric Conductivity of Nanofluids Based on Particles Aggregation Theory. First International Conference on Integration and Commercialization of Micro and Nanosystems, Parts A and B.DOI
  399. Haitao Hu, Guoliang Ding, Kai-jian Wang (2007). Measurement and correlation of frictional two-phase pressure drop of R410A/POE oil mixture flow boiling in a 7mm straight micro-fin tube. Applied Thermal Engineering.DOI
  400. Haitao Hu, Guoliang Ding, Wenjian Wei, Zhence Wang, Kaijian Wang (2007). Heat transfer characteristics of R410A-oil mixture flow boiling inside a 7mm straight smooth tube. Experimental Thermal and Fluid Science.DOI
  401. Zhigang Wu, Guoliang Ding, Kaijian Wang, Masaharu Fukaya (2007). Application of a genetic algorithm to optimize the refrigerant circuit of fin-and-tube heat exchangers for maximum heat transfer or shortest tube. International Journal of Thermal Sciences.DOI
  402. Kezhi Yu, Guoliang Ding, Tianji Chen (2007). Modified two-fluid model for air curtains in open vertical display cabinets. International Journal of Refrigeration.DOI
  403. Xiaokui Ma, Guoliang Ding, Yuanming Zhang, Kaijian Wang (2007). Effects of hydrophilic coating on air side heat transfer and friction characteristics of wavy fin and tube heat exchangers under dehumidifying conditions. Energy Conversion and Management.DOI
  404. Xiaokui Ma, Guoliang Ding, Yuanming Zhang, Kaijian Wang (2007). Airside heat transfer and friction characteristics for enhanced fin-and-tube heat exchanger with hydrophilic coating under wet conditions. International Journal of Refrigeration.DOI
  405. Wenjian Wei, Guoliang Ding, Haitao Hu, Kaijian Wang (2007). Influence of lubricant oil on heat transfer performance of refrigerant flow boiling inside small diameter tubes. Part II: Correlations. Experimental Thermal and Fluid Science.DOI
  406. Wenjian Wei, Guoliang Ding, Haitao Hu, Kaijian Wang (2007). Influence of lubricant oil on heat transfer performance of refrigerant flow boiling inside small diameter tubes. Part I: Experimental study. Experimental Thermal and Fluid Science.DOI
  407. Kezhi Yu, Guoliang Ding, Tianji Chen (2007). Simulation of air curtains for vertical display cases with a two-fluid model. Applied Thermal Engineering.DOI
  408. Huang Dongping, Hans H. Quack, Guoliang Ding (2007). Experimental study of throttling of carbon dioxide refrigerant to atmospheric pressure. Applied Thermal Engineering.DOI
  409. Dong-ping Huang, Guoliang Ding, Hans H. Quack (2007). Theoretical analysis of deposition and melting process during throttling high pressure CO2 into atmosphere. Applied Thermal Engineering.DOI
  410. Guoliang Ding (2007). SIMULATION ON MULTI-PATH FIN-AND-TUBE HEAT EXCHANGER CONTAINING CAPILLARIES. Chinese Journal of Mechanical Engineering.
  411. 吴志刚,丁国良,芮银波(2006). 制冷剂热力性质的快速计算 Ⅱ.典型工质计算公式. 《上海交通大学学报》.
  412. 马小魁,丁国良(2006). 湿工况下翅片管换热器空气侧特性研究进展. 《流体机械》.
  413. 尹斌,欧阳惕,丁国良(2006). R134a外螺纹管水冷冷凝器研究. 《流体机械》.
  414. 龙慧芳,丁国良,吴志刚(2006). 单组分制冷剂过冷区热力性质的快速计算方法. 《流体机械》.
  415. 龙慧芳,丁国良,董洪州,吴志刚(2006). 基于OpenGL的翅片管式换热器可视化仿真方法. 《计算机仿真》.
  416. 姜未汀,丁国良,王凯建(2006). 基于颗粒团聚理论的纳米制冷剂导热系数计算. 《上海交通大学学报》.
  417. 魏文建,丁国良,胡海涛,王凯建(2006). 制冷剂-润滑油混合物系管内流动沸腾阻力特性. 《上海交通大学学报》.
  418. 芮银波,丁国良,吴志刚(2006). 翅片管换热器仿真软件精度自适应校正方法. 《上海交通大学学报》.
  419. 吴志刚,丁国良(2006). 制冷剂过冷区热力性质的快速计算. 《上海交通大学学报》.
  420. 吴志刚,丁国良,芮银波(2006). 含临界区的制冷剂饱和热力性质的快速计算. 《上海交通大学学报》.
  421. 黄冬平,丁国良,Quack HANS(2006). 高压二氧化碳节流排放堵塞实验. 《上海交通大学学报》.
  422. 刘建,丁国良(2006). 以R410A为工质的空调换热器性能仿真与实验. 《上海交通大学学报》.
  423. 卢智利,丁国良(2006). 蒸发器并联双循环冰箱的温度与分时运行控制策略 Ⅰ.理论分析. 《上海交通大学学报》.
  424. 卢智利,丁国良(2006). 蒸发器并联双循环冰箱的温度与分时运行控制策略 Ⅱ.实验验证. 《上海交通大学学报》.
  425. 魏文建,胡海涛,丁国良,王凯建(2006). 含油制冷剂在小管径换热管内流动沸腾换热特性实验研究. 《上海交通大学学报》.
  426. 吴志刚,丁国良(2006). 制冷剂热力性质的快速计算 Ⅰ.计算方法. 《上海交通大学学报》.
  427. 姜未汀,丁国良,王凯建(2006). 基于Lattice-Boltzmann方法的混合制冷剂粘度计算. 《上海交通大学学报》.
  428. Zhili Lu, Guoliang Ding (2006). Temperature and time-sharing running combination control strategy of two-circuit cycle refrigerator–freezer with parallel evaporators. Applied Thermal Engineering.DOI
  429. Guoliang Ding (2006). Simulation technology for refrigeration and air conditioning appliances. Chinese Science Bulletin.DOI
  430. Guoliang Ding (2006). Development of Airside Characteristics Study of Fin-and-tube Heat Exchanger in Wet Conditions. Fluid Machinery.
  431. 丁国良,刘建,董洪洲(2005). 基于图论的翅片管换热器三维仿真软件开发. 《制冷空调新技术进展——第三届制冷空调新技术研讨会论文集》.
  432. 魏文建,刘建,丁国良,张春路(2005). 基于两相流体网络的翅片管换热器仿真模型研究. 《流体机械》.
  433. 芮银波,丁国良,吴志刚(2005). 遗传算法神经网络混合算法改进换热器的仿真精度. 《上海市制冷学会2005年学术年会论文集》.
  434. 龙慧芳,丁国良,吴志刚,董洪州(2005). 数据库和可视化技术在翅片管换热器仿真中的应用. 《上海市制冷学会2005年学术年会论文集》.
  435. 吴志刚,丁国良,刘建(2005). 混合工质两相区热力性质隐式拟合方法. 《工程热物理学报》.
  436. 魏文建,丁国良,王凯建(2005). 制冷剂-润滑油互溶混合物系流动沸腾特性测试装置的研制. 《低温工程》.
  437. 刘建,丁国良,吴志刚(2005). R407C两相区热力性质的无量纲隐式拟合方法. 《上海交通大学学报》.
  438. 余克志,丁国良,陈天及(2005). 立式陈列柜空气流动与热湿交换的整体模型. 《上海交通大学学报》.
  439. 刘建,魏文建,丁国良,王凯建(2005). 对具有复杂流路布置的翅片管换热器的性能仿真与分析. 《化工学报》.
  440. 董洪洲,丁国良,刘建,吴志刚(2005). 面向对象的可视化翅片管换热器自建模仿真系统的功能实现. 《系统仿真学报》.
  441. 刘建,丁国良,董洪洲,吴志刚(2005). 面向对象的可视化翅片管换热器自建模仿真系统的总体框架. 《系统仿真学报》.
  442. Junwei Hu, Guoliang Ding (2005). Effect of the air outlet louver on the noise generated by the outdoor set of a split-unit air conditioner. Applied Thermal Engineering.DOI
  443. Junwei Hu, Guoliang Ding (2005). Effect of deflecting ring on noise generated by outdoor set of a split-unit air conditioner. International Journal of Refrigeration.DOI
  444. Guoliang Ding, Zhigang Wu, Jian Liu, Takefumi Inagaki, Kaijian Wang, Masaharu Fukaya (2005). An implicit curve-fitting method for fast calculation of thermal properties of pure and mixed refrigerants. International Journal of Refrigeration.DOI
  445. 程卓明,朱军山,丁国良(2004). 冰箱门封结构改进对漏热的影响. 《2004空调器、电冰箱(柜)及压缩机学术交流会论文集》.
  446. 卢智利,丁国良,张春路(2004). 冷藏蒸发器面积可变的旁通双循环冰箱. 《工程热物理学报》.
  447. 赵力,张启,丁国良(2004). 一种非共沸混合工质的循环特性分析. 《工程热物理学报》.
  448. 吴志刚,丁国良,刘建,高屹峰(2004). 铜翅片换热器开发应用的分析Ⅰ——铜、铝翅片换热器性能对比. 《发电技术》.
  449. 刘建,丁国良,吴志刚,高屹峰(2004). 铜翅片换热器开发应用的分析Ⅱ——铜翅片换热器对空调器性能影响分析. 《发电技术》.
  450. 赵鹏程,丁国良,张春路,赵力(2004). 应用混合工质的地热热泵系统仿真. 《太阳能学报》.
  451. 赵鹏程,赵力,丁国良,张春路(2004). 地热热泵循环工质的开发及系统匹配. 《太阳能学报》.
  452. 胡俊伟,丁国良,张春路(2004). 热交换器形状对空调室内机性能的影响. 《制冷学报》.
  453. 卢智利,丁国良,张春路(2004). 双温双控冰箱的仿真与应用. 《上海交通大学学报》.
  454. 胡俊伟,丁国良,赵力,张春路(2004). 贯流风机结构参数及工作特性的关联. 《上海交通大学学报》.
  455. 卢智利,丁国良,黄斌(2004). 准动态模型的直冷式冰箱系统仿真. 《上海交通大学学报》.
  456. 卢智利,丁国良(2004). 二次冷媒无霜电冰箱的理论分析. 《上海交通大学学报》.
  457. 丁国良,伏龙(2004). 风冷式冷水机组实现全年供冷的制冷剂流量与风量控制策略. 《上海交通大学学报》.
  458. 胡俊伟,丁国良(2004). 开缝翅片压降和换热特性的数值模拟. 《上海交通大学学报》.
  459. Guoliang Ding, Long Fu (2004). Performance analysis and improvement of air-to-water chiller for application in wide ambient temperature range. Applied Thermal Engineering.DOI
  460. Guoliang Ding, Chun‐Lu Zhang, Tao Zhan (2004). An approximate integral model with an artificial neural network for heat exchangers. Heat Transfer-Asian Research.DOI
  461. Guoliang Ding, Hongtao Qiao, Zhili Lu (2004). Ways to improve thermal uniformity inside a refrigerator. Applied Thermal Engineering.DOI
  462. Guoliang Ding, Chun‐Lu Zhang, Zhili Lu (2004). Dynamic simulation of natural convection bypass two-circuit cycle refrigerator–freezer and its application. Applied Thermal Engineering.DOI
  463. 杨亮,丁国良,黄冬平,张春路(2003). 亚临界二氧化碳换热特性研究进展. 《制冷学报》.
  464. 黄冬平,丁国良,张春路(2003). 不同跨临界二氧化碳制冷循环的性能比较. 《上海交通大学学报》.
  465. 伏龙,丁国良,苏祖坚(2003). 螺杆冷水机组稳态仿真. 《上海交通大学学报》.
  466. 乔洪涛,卢智利,丁国良,张春路(2003). CFD在冰箱结构优化中的应用现状. 《低温工程》.
  467. 丁国良,张春路,刘建,魏文建,Masae Nakayama,Masaharu Fukaya,Gaiken OH,Takefumi Inagaki(2003). 面向对象的整体式翅片管换热器快速仿真软件开发. 《上海市制冷学会二○○三年学术年会论文集》.
  468. 赵鹏程,赵力,丁国良(2003). 板式蒸发器非共沸工质换热与压降研究. 《工程热物理学报》.
  469. 赵鹏程,赵力,丁国良,张春路(2003). 二元混合工质与换热介质的温度匹配在热泵中的应用. 《太阳能学报》.
  470. 魏文建,刘建,丁国良,张春路(2003). 混合工质水平管内流动凝结换热研究进展. 《制冷学报》.
  471. 杨亮,丁国良,黄冬平,张春路(2003). 超临界二氧化碳流动和换热研究进展. 《制冷学报》.
  472. 刘建,魏文建,丁国良,张春路(2003). 翅片管式换热器换热与压降特性的实验研究进展——实验研究. 《制冷学报》.
  473. 伏龙,丁国良,张春路,仲华(2003). 风冷热泵冷热水机组动态过程仿真. 《工程热物理学报》.
  474. Chun‐Lu Zhang, Guoliang Ding (2003). Approximate analytic solutions of adiabatic capillary tube. International Journal of Refrigeration.DOI
  475. Long Fu, Guoliang Ding, Chun‐Lu Zhang (2003). Dynamic simulation of air-to-water dual-mode heat pump with screw compressor. Applied Thermal Engineering.DOI
  476. Chun‐Lu Zhang, Guoliang Ding (2003). A stable series expansion method for calculating thermal response factors of multi-layer walls. Building and Environment.DOI
  477. Guoliang Ding (2003). The Analogical Method for the Design of Adiabatic Capillary Tubes.
  478. Guoliang Ding (2003). Construction of System Algorithm for Steady-state Simulation of Refrigeration. Acta Simulata Systematica Sinica.
  479. 伏龙,丁国良,张春路,苏祖坚(2002). 螺杆冷水机组动态仿真. 《低温工程》.
  480. 丁国良,伏龙,苏祖坚,张春路(2002). 螺杆式冷水机组性能分析. 《制冷学报》.
  481. 丁国良,张春路,詹涛(2002). 结合神经网络的换热器积分近似模型. 《工程热物理学报》.
  482. 丁国良,张春路,刘浩(2002). 结合人工神经网络的翅片管式冷凝器快速仿真模型. 《工程热物理学报》.
  483. 赵力,张启,丁国良(2002). 一种地热热泵的新型工质实验分析. 《太阳能学报》.
  484. 黄冬平,梁贞潜,丁国良,张春路(2002). 基于模型的二氧化碳微通道气体冷却器性能分析. 《化工学报》.
  485. 丁国良,伏龙,苏祖坚,张春路(2002). 螺杆机组动态仿真(一):开机过程. 《工程热物理学报》.
  486. 张春路,丁国良(2002). 电冰箱动态负荷传递函数模型. 《上海交通大学学报》.
  487. 张春路,丁国良(2002). 基于负荷模型的电冰箱制冷量辨识与分析. 《上海交通大学学报》.
  488. 卢智利,丁国良,曹家枞(2002). 燃气水加热器用翅片管换热器传热特性的实验. 《上海交通大学学报》.
  489. 梁贞潜,丁国良,张春路,黄冬平(2002). 二氧化碳汽车空调器仿真与优化. 《上海交通大学学报》.
  490. 张春路,丁国良(2002). 制冷系统稳态仿真算法研究. 《上海交通大学学报》.
  491. Long Fu, Guoliang Ding, Zujian Su, Guoquan Zhao (2002). Steady-state simulation of screw liquid chillers. Applied Thermal Engineering.DOI
  492. Guoliang Ding, Chun‐Lu Zhang, Hao Liu (2002). A fast simulation model combining with artificial neural networks for fin‐and‐tube condenser. Heat Transfer-Asian Research.DOI
  493. Chun‐Lu Zhang, Guoliang Ding (2002). A Novel Thermal Response Factor Method for the Dynamic Load Calculation of Buildings. Journal of Asian Architecture and Building Engineering.DOI
  494. 赵力,丁国良(2001). 热泵负荷调节中的两类模糊关系. 《上海市制冷学会二○○一年学术年会论文集》.
  495. 丁国良,黄冬平,张春路(2001). 跨临界二氧化碳汽车空调稳态仿真. 《工程热物理学报》.
  496. 丁国良,张春路(2001). 基于模型的制冷系统智能化仿真研究. 《工程热物理学报》.
  497. 丁国良,张春路,孙庆,沈建,伍凯,郭卫东,顾中华(2001). 面向企业应用的窗式空调器仿真技术. 《制冷学报》.
  498. 詹涛,张春路,王昔林,丁国良(2001). 基于RBF网络的制冷压缩机热力性能计算. 《上海交通大学学报》.
  499. 张春路,丁国良(2001). 毛细管两级串联节流特性. 《上海交通大学学报》.
  500. 沈宇纲,黄冬平,张春路,丁国良(2001). R410A和R407C热力性质简化计算. 《上海交通大学学报》.
  501. 詹涛,张春路,丁国良(2001). 一种改进BP算法在制冷系统仿真中的应用. 《上海交通大学学报》.
  502. 丁国良,黄冬平,张春路(2001). 跨临界二氧化碳汽车空调特性分析. 《制冷学报》.
  503. 刘浩,张春路,丁国良(2000). 基于平均比容人工神经网络辨识的绝热毛细管简化模型. 《上海交通大学学报》.
  504. 薛振明,于兵,张春路,陈芝久,丁国良(2000). 热泵型空调器四通换向阀容量的测定及换算. 《建筑热能通风空调》.
  505. 张春路,丁国良,李灏(2000). 制冷剂过热气体热力性质的隐式拟合方法. 《工程热物理学报》.
  506. 刘浩,张春路,丁国良(2000). 结合人工神经网络的冷凝器稳态分布参数模型. 《上海交通大学学报》.
  507. 黄冬平,丁国良,张春路(2000). 二氧化碳汽车空调器变工况性能分析. 《流体机械》.
  508. 丁国良,黄冬平,张春路,陈江平,陈芝久(2000). 跨临界循环二氧化碳汽车空调研究进展. 《制冷学报》.
  509. 丁国良,张春路,詹涛(2000). 制冷压缩机热力性能的模糊建模方法. 《上海交通大学学报》.
  510. 张春路,薛振明,丁国良(2000). 空调器换向过程动态特性模拟. 《上海交通大学学报》.
  511. 丁国良,张春路,刘浩(2000). 基于模型和神经网络的绝热毛细管快速仿真方法. 《工程热物理学报》.
  512. Guoliang Ding, Chun‐Lu Zhang, Zhan Tao, Hao Li (2000). Compound fuzzy model for thermal performance of refrigeration compressors. Chinese Science Bulletin.DOI
  513. 张春路,丁国良,李灏(1999). 制冷剂饱和热力性质的隐式拟合方法. 《工程热物理学报》.
  514. 丁国良,张春路,李灏,陈芝久(1999). 毛细管的通用积分模型. 《工程热物理学报》.
  515. 张春路,李灏,丁国良,陈芝久(1999). 大平板瞬态热传导问题的一种新的近似解法. 《工程热物理学报》.
  516. 丁国良,张春路,李灏(1999). 神经网络在空调器仿真中的应用研究. 《制冷学报》.
  517. 张春路,丁国良,李灏(1999). 毛细管内两相流的通用积分模型. 《化工学报》.
  518. 薛振明,张春路,曹霞,邱鹏昌,丁国良,陈芝久(1999). 热泵空调换向过程仿真研究. 《上海市制冷学会一九九九年学术年会》.
  519. Guoliang Ding, Chun‐Lu Zhang, Hao Li, Zhijiu Chen (1999). An approximate analytic model for flow through capillary tubes. Chinese Science Bulletin.DOI
  520. 丁国良,L.R.Oellrich(1998). 冰箱中空气流场和温度场的有限元模拟. 《上海交通大学学报》.
  521. 丁国良,张春路,李灏,陈芝久(1998). 制冷空调装置智能仿真方法研究初探. 《制冷学报》.
  522. 丁国良,L.R.Oellrich(1998). 冰箱箱内空气温度场与流场的优化研究. 《制冷学报》.
  523. 李灏,张春路,丁国良(1998). 计算墙体反应系数的模型降阶方法. 《上海交通大学学报》.
  524. 丁国良,张春路,于兵,陈芝久(1998). 异丁烷冰箱动态仿真. 《制冷学报》.
  525. Chun‐Lu Zhang, Hao Li, Guoliang Ding, ZhiJiu Chen (1998). A NEW APPROXIMATE ANALYTIC METHOD FOR SOME HEAT-CONDUCTION PROBLEMS. International Heat Transfer Conference (IHTC).DOI
  526. 丁国良(1997). 德国制冷装置CFCs替代方案与TEWI. 《制冷学报》.
  527. 李灏,张春路,丁国良(1997). 压缩机热力计算的新方法. 《上海市制冷学会一九九七年学术年会》.
  528. 张春路,丁国良,陈芝久(1997). 空调负荷计算中反应系数和传递系数的异步长关系研究. 《上海交通大学学报》.
  529. 阙雄才,于兵,丁国良,陈芝久(1997). 间冷式电冰箱风道阻力与流量分配特性的探讨. 《上海交通大学学报》.
  530. 丁国良,王险峰,陈芝久(1995). 小型制冷装置HFC134a和HFC152a充注量的研究. 《流体机械》.
  531. 丁兵,阙雄才,丁国良,陈芝久(1995). 翅片管式蒸发器结霜特性摸拟. 《流体机械》.
  532. 丁国良,陈芝久(1992). 直冷式电冰箱蒸发器动态特性及其数学模型研究. 《流体机械》.
  533. 丁国良,陈芝久(1990). 制冷装置保温层模型研究. 《制冷学报》.
  534. 丁国良,阙雄才,陈芝久(1990). 用于制冷系统仿真的冷凝器数学模型研究. 《流体机械》.

此主页由公开资料整理,尚未经学者本人认领。