赵火平｜华东交通大学｜学者主页

2026

Microstructure and tribological properties of Y2O3-doped Fe-based alloy coatings by laser cladding

Huoping Zhao, Liyao Li, Mingxue Shen, Qiang Hu, Han-yu Zhou, Ye-long Xiao, Deying Li, Shao-peng Liu

China Foundry

DOI

2025

Y2O3掺杂激光选区熔覆Fe45合金涂层第三体摩擦学性能

周涵宇，赵阳，李德英，刘少鹏，沈明学，赵火平

《特种铸造及有色合金》

2025

激光扫描速度对3D打印青铜合金熔覆层组织及耐磨性能的影响

伍强，肖叶龙，沈明学，熊光耀，季德惠，赵火平

《粉末冶金材料科学与工程》

DOI

2025

选区激光熔覆钴基合金涂层修复高速列车损伤制动盘的表面质量优化

王军鹏，宋飞，彭品皓，李德英，汪阿金，黎秋萍，赵火平

《铸造》

2025

铝合金微光栅重熔表面的力学行为及耐磨性研究

李秉臣，黎秋萍，季德惠，赵火平，熊光耀，沈明学

《润滑与密封》

2025

The Evolution of Brake Disc Materials for Trains: A Review

Yelong Xiao, Leliang Zhou, Huoping Zhao, Tianyong Wang, Junhua Du, Mingxue Shen

Coatings

DOI

2025

Review of rare earth oxide doping-modified laser cladding of Fe-based alloy coatings

Han-yu Zhou, Liyao Li, Yang Zhao, Mingxue Shen, Huoping Zhao, Yelong Xiao, Shaopeng Liu

China Foundry

DOI

2024

选择性激光熔化技术制备的Cu-10Sn合金的载流摩擦学性能

方长洋，季德惠，熊光耀，肖叶龙，赵火平，沈明学

《润滑与密封》

2024

Tribological properties of copper-matrix composites against laser-cladded Co06 coating on 30CrMoSiVA steel at elevated temperatures

Yelong Xiao, Lerong Shen, Lerong Shen, Huoping Zhao, Yu Hui Cheng, Junhua Du, Mingxue Shen

Tribology International

DOI

2023

微喷射粘结增材制造CaO基陶瓷型芯

付培国，汪阿金，李刚辉，蒙德远，樊自田，沈明学，赵火平

《特种铸造及有色合金》

DOI

2023

局部堆焊修复U75V钢轨的滚动接触磨损特性

容彬，汪永强，赵火平，刘少鹏，沈明学

《机械工程材料》

2023

Different responses of wheel–rail interface adhesion and wheel surface damage induced by an out–of–round wheel tread

Mingxue Shen, Bin Rong, Qiuping Li, Meng Yu, Yelong Xiao, Huoping Zhao

Wear

DOI

2023

Impact Wear Behavior of HVOF-Sprayed WC-10Co-4Cr Coating on Medium Carbon Steel Under Controlled Kinetic Energy

Shaopeng Liu, Yongqiang Wang, Mingxue Shen, Qiang Hu, Jing Xia, Youliang Zhang, Huoping Zhao

Journal of Thermal Spray Technology

DOI

2022

纳米氧化锆分散液微喷射黏结增材制造氧化锆陶瓷

赵火平，李士伟，汪阿金，肖叶龙，刘少鹏，季德惠，沈明学

《硅酸盐学报》

2022

制动盘过度磨损表面激光再制造钴基合金熔覆层的摩擦磨损性能

赵火平，李士伟，沈明学，肖叶龙，季德惠

《机械工程材料》

2022

环境湿度对碳/铜滑动接触副载流摩擦学行为的影响

李含欣，季德惠，沈明学，肖叶龙，赵火平，刘新龙，熊光耀

《摩擦学学报(中英文)》

2022

Effect of Initial Kinetic Energy of Si3N4 Ball on Impact Wear Behavior of High-Velocity Oxygen Fuel-Sprayed WC-10Co-4Cr Coating and Medium-Carbon Steel

Shaopeng Liu, Lang Mei, Mingxue Shen, Jing Xia, Yelong Xiao, Huoping Zhao, Youliang Zhang, Qiang Hu

Journal of Materials Engineering and Performance

DOI

2022

Improving the properties of binder jetted ceramics via nanoparticle dispersion infiltration

Huoping Zhao, Ajin Wang, Ganghui Li, Qiang Hu, Chunsheng Ye, Mingxue Shen, Yelong Xiao, Shaopeng Liu, Dehui Ji

Ceramics International

DOI

2022

Effect of abrasive particle size on the tribological behavior of thermal sprayed WC-Cr3C2-Ni coatings

Dehui Ji, Hui Zhuang, Qiang Hu, Hai-Long Yao, Youliang Zhang, Hui Guo, Huoping Zhao, Mingxue Shen

Journal of Alloys and Compounds

DOI

2022

Three-Body Abrasive Wear Behavior of WC-10Cr3C2-12Ni Coating for Ball Mill Liner Application

Qiang Hu, Dehui Ji, Mingxue Shen, Hui Zhuang, Hai-Long Yao, Huoping Zhao, Hui Guo, Youliang Zhang

Materials

DOI

2022

Friction and wear behavior of copper metal matrix composites at temperatures up to 800 °C

Yelong Xiao, Yu Hui Cheng, Mingxue Shen, Pingping Yao, Junhua Du, Dehui Ji, Huoping Zhao, Shaopeng Liu, Licheng Hua

Journal of Materials Research and Technology

DOI

2021

FeCoCrNiAl/Al2O3金属陶瓷坯体凝胶注模研究

赵明娟，薛林威，赵火平，赵龙志，余梦，李劲

《华东交通大学学报》

DOI

2021

激光沉积AlxTiCrMnCu高熵合金组织性能的研究

胡勇，刘飞，王达豪，赵龙志，唐延川，刘德佳，沈明学，赵火平，焦海涛

《稀有金属材料与工程》

2021

油润滑状态下颗粒尺寸对PTFE/316L密封界面摩擦学行为的影响

沈明学，李波，李圣鑫，赵火平，熊光耀

《宁波大学学报(理工版)》

2021

Evolution of contact surface characteristics and tribological properties of a copper-based sintered material during high-energy braking

Yelong Xiao, Yu Hui Cheng, Haibin Zhou, Weihan Liang, Mingxue Shen, Pingping Yao, Huoping Zhao, Guangyao Xiong

Wear

DOI

2021

The role of relatively humidity in friction and wear behaviors of carbon sliding against copper with electric current

Dehui Ji, Han-Xin Li, Mingxue Shen, Huoping Zhao, Qiang Hu, Xin‐long Liu, Guangyao Xiong

Surface Topography Metrology and Properties

DOI

2021

Influence of ambient humidity on the adhesion and damage behavior of wheel–rail interface under hot weather condition

Kang–jie Rong, Yelong Xiao, Mingxue Shen, Huoping Zhao, Wenjian Wang, Guangyao Xiong

Wear

DOI

2019

Fabricating an effective calcium zirconate layer over the calcia grains via binder-jet 3D-printing for improving the properties of calcia ceramic cores

Huoping Zhao, Chunsheng Ye, Shuhua Xiong, Zitian Fan, Longzhi Zhao

Additive manufacturing

DOI

2019

Parameters optimization of binder jetting process using modified silicate as a binder

Shuangjun Huang, Chun-Sheng Ye, Huoping Zhao, Zitian Fan

Materials and Manufacturing Processes

DOI

2019

Binder jetting yttria stabilised zirconia ceramic with inorganic colloid as a binder

Shuangjun Huang, Chun-Sheng Ye, Huoping Zhao, Zitian Fan, Qingsong Wei

Advances in Applied Ceramics Structural Functional and Bioceramics

DOI

2019

Additive manufacturing of thin alumina ceramic cores using binder-jetting

Shuangjun Huang, Chunsheng Ye, Huoping Zhao, Zitian Fan

Additive manufacturing

DOI

2017

粘结剂体系对微喷射粘结成形砂型精度和性能的影响

赵火平，叶春生，樊自田，王长明，闫国栋

《铸造》

2017

基于Qt的微喷射粘结快速成形系统软件

李元，叶春生，赵火平

《电子技术与软件工程》

2015

微喷射粘结快速成形铸造型芯关键技术研究

赵火平

《华中科技大学》

2015

基于Qt的微喷射粘结成型设备的控制系统设计

肖翔，叶春生，赵火平

《电子技术与软件工程》

2011

三维打印技术在粉末材料快速成形中的研究现状评述

赵火平，樊自田，叶春生

《航空制造技术》

2010

原位合成TiB2/Al-4Cu复合材料的组织和摩擦磨损性能

尧军平，杨文凤，赵火平

《特种铸造及有色合金》

2010

原位内生TiB2/Al基复合材料制备技术评述

赵火平

《铝加工》

2010

原位合成TiB2/Al-4Cu复合材料组织和性能的研究

赵火平

《南昌航空大学》

2009

真空渗流法制备微孔复合泡沫铝的工艺研究

赵火平，尧军平，龙文元，张磊

《特种铸造及有色合金》

2009

原位合成TiB2/Al-7Si复合材料的微观组织及强化机理

赵火平，尧军平，谭艳军，张磊

《热加工工艺》

精选作品

期刊论文

Microstructure and tribological properties of Y2O3-doped Fe-based alloy coatings by laser cladding

Y2O3掺杂激光选区熔覆Fe45合金涂层第三体摩擦学性能

激光扫描速度对3D打印青铜合金熔覆层组织及耐磨性能的影响

选区激光熔覆钴基合金涂层修复高速列车损伤制动盘的表面质量优化

铝合金微光栅重熔表面的力学行为及耐磨性研究

The Evolution of Brake Disc Materials for Trains: A Review

Review of rare earth oxide doping-modified laser cladding of Fe-based alloy coatings

选择性激光熔化技术制备的Cu-10Sn合金的载流摩擦学性能

Tribological properties of copper-matrix composites against laser-cladded Co06 coating on 30CrMoSiVA steel at elevated temperatures

微喷射粘结增材制造CaO基陶瓷型芯

局部堆焊修复U75V钢轨的滚动接触磨损特性

Different responses of wheel–rail interface adhesion and wheel surface damage induced by an out–of–round wheel tread

Impact Wear Behavior of HVOF-Sprayed WC-10Co-4Cr Coating on Medium Carbon Steel Under Controlled Kinetic Energy

纳米氧化锆分散液微喷射黏结增材制造氧化锆陶瓷

制动盘过度磨损表面激光再制造钴基合金熔覆层的摩擦磨损性能

环境湿度对碳/铜滑动接触副载流摩擦学行为的影响

Effect of Initial Kinetic Energy of Si3N4 Ball on Impact Wear Behavior of High-Velocity Oxygen Fuel-Sprayed WC-10Co-4Cr Coating and Medium-Carbon Steel

Improving the properties of binder jetted ceramics via nanoparticle dispersion infiltration

Effect of abrasive particle size on the tribological behavior of thermal sprayed WC-Cr3C2-Ni coatings

Three-Body Abrasive Wear Behavior of WC-10Cr3C2-12Ni Coating for Ball Mill Liner Application

Friction and wear behavior of copper metal matrix composites at temperatures up to 800 °C

FeCoCrNiAl/Al2O3金属陶瓷坯体凝胶注模研究

激光沉积AlxTiCrMnCu高熵合金组织性能的研究

油润滑状态下颗粒尺寸对PTFE/316L密封界面摩擦学行为的影响

Evolution of contact surface characteristics and tribological properties of a copper-based sintered material during high-energy braking

The role of relatively humidity in friction and wear behaviors of carbon sliding against copper with electric current

Influence of ambient humidity on the adhesion and damage behavior of wheel–rail interface under hot weather condition

Fabricating an effective calcium zirconate layer over the calcia grains via binder-jet 3D-printing for improving the properties of calcia ceramic cores

Parameters optimization of binder jetting process using modified silicate as a binder

Binder jetting yttria stabilised zirconia ceramic with inorganic colloid as a binder

Additive manufacturing of thin alumina ceramic cores using binder-jetting

粘结剂体系对微喷射粘结成形砂型精度和性能的影响

基于Qt的微喷射粘结快速成形系统软件

微喷射粘结快速成形铸造型芯关键技术研究

基于Qt的微喷射粘结成型设备的控制系统设计

三维打印技术在粉末材料快速成形中的研究现状评述

原位合成TiB2/Al-4Cu复合材料的组织和摩擦磨损性能

原位内生TiB2/Al基复合材料制备技术评述

原位合成TiB2/Al-4Cu复合材料组织和性能的研究

真空渗流法制备微孔复合泡沫铝的工艺研究

原位合成TiB2/Al-7Si复合材料的微观组织及强化机理

会议论文

氢氧化钙添加量对非吸湿石膏型芯性能的影响

Effect of Particle Size Distribution on the Properties of Sand Mold by Three Dimensional Printing

预印本

Achieving Enhanced Strength-Ductility and Wear Resistance in Laser Powder Bed Fused Al0.3cocrfeni Via Inducing L12 Precipitates

Influence of L12 precipitation on the tribological behavior and subsurface evolution of Al0.3CoCrFeNi alloy

研究方向