李宝仁

2026

水下航行器垂向冲击载荷仿真研究

《机床与液压》

2026

面向长管状件的液压冲击测试装置动态特性研究

《液压与气动》

2026

高压流量调节阀内润滑油雾压燃数值模拟

《液压与气动》

2026

深海装备高压气动蓄能弹射布放系统设计与特性分析

《液压与气动》

2026

电动高压空气减压阀模糊PID压力控制研究

《液压与气动》

2026

Thermoviscous Poiseuille–Couette flow reversal and clearance selection for involute helical pairs under polar conditions

International Communications in Heat and Mass Transfer

DOI

2026

Numerical study on the competitive mechanism of homogeneous and heterogeneous icing in supersonic flow of high-pressure air pressure reducing valves

Applied Thermal Engineering

DOI

2026

Composite anti-disturbance control strategy for high-pressure pneumatic position servo system

Journal of Control and Decision

DOI

2026

Design optimization of combined steam pressure reducing valves for aerodynamic noise reduction

Annals of Nuclear Energy

DOI

2026

Flexible dynamic modeling and output characteristics analysis of double Helix oscillating hydraulic cylinder based on parallel mathematical model

Proceedings of the Institution of Mechanical Engineers Part K Journal of Multi-body Dynamics

DOI

2026

Design and validation of a pneumatic-hydraulic shock testing apparatus for laboratory evaluation of marine structural components

ENGINEERING Mechanical Engineering

DOI

2026

Numerical investigation of vapor condensation and nanodroplet impingement in high-pressure supersonic humid air flow

Applied Thermal Engineering

DOI

2026

Optimized design and experimental study of an ultra-high-pressure air linear flow regulation valve

Flow Measurement and Instrumentation

DOI

2025

电液伺服系统线性自抗扰控制参数频域整定方法

《浙江大学学报(工学版)》

2025

基于能耗约束的水下航行器路径规划与浮力调节系统优化

《液压与气动》

2025

超高压大通径快开阀流量特性与气动力数值研究

《液压与气动》

2025

T–S Fuzzy Multi-model Predictive Control for Nonlinear SAMCG System with Unmodeled Dynamics Compensation

International Journal of Fuzzy Systems

DOI

2025

Physics-informed neural network-based prediction of chamber wall heat flux losses in gas flow temperature control system

International Communications in Heat and Mass Transfer

DOI

2025

Numerical investigation of droplet and film behavior in a pressure reducing valve using a two-phase three-field condensation model

Applied Thermal Engineering

DOI

2025

Instability analysis and improvement of a high-pressure and high-flow air pressure-reducing regulator

Frontiers of Mechanical Engineering

DOI

2025

Aerodynamics noise analysis inside multi-stage Tesla valves for superheated steam decompression

Physics of Fluids

DOI

2025

Research on steady state hydrodynamics and structural improvement of micro valves

Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering

DOI

2025

Numerical investigation of low temperature icing mechanisms in ultra-high-pressure supersonic flow

International Journal of Heat and Mass Transfer

DOI

2025

Numerical simulation for ice crystal formation in high-pressure supersonic humid air low-temperature flow

International Communications in Heat and Mass Transfer

DOI

2025

Output temperature estimation of the gas flow temperature control system based on artificial neural network

International Communications in Heat and Mass Transfer

DOI

2025

Feasibility Study on the Elimination of Force-Position Coupling in Steering Systems With a Novel Compound Rotary Vane Steering Gear

IEEE Journal of Oceanic Engineering

DOI

2025

Strong-Nonlinear-Load-Disturbance-Compensation-Based Position Tracking Control of Electrohydraulic System for Bidirectional Powder Compaction Press

IEEE/ASME Transactions on Mechatronics

DOI

2024

基于CFD的机械随动调节高度控制阀数值仿真

《液压与气动》

2024

双向液压机位移-力双变量高精度耦合控制方法

《液压与气动》

2024

迷宫流道流阻特性研究与优化设计

《液压与气动》

2024

高压气动减压阀内部湿空气凝结特性

《液压与气动》

2024

散粒体压制成型过程非线性负载力补偿算法研究

《华中科技大学学报(自然科学版)》

2024

声学探测型水下滑翔机吸声结构设计及仿真分析

《水下无人系统学报》

2024

Acoustic characterization study for multi-hole orifices in nuclear piping system

Progress in Nuclear Energy

DOI

2024

Enhanced robust control based on ESO for high-pressure electro-pneumatic servo valve with strong anti-disturbance performance

Nonlinear Dynamics

DOI

2024

Flow inferential measurement for proportional control valves by combining wavelet denoising and a dual-attention-based LSTM network

Flow Measurement and Instrumentation

DOI

2024

Mixing efficiency optimization of Tesla-type flow channel for total temperature simulation device

Aerospace Science and Technology

DOI

2024

Research on vibration characteristics of cone valve based on steady state hydrodynamics

Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering

DOI

2024

Numerical simulation of condensation flows of humid air in the high-pressure pneumatic pressure-reducing valve

International Communications in Heat and Mass Transfer

DOI

2024

Design optimization of noise reduction for labyrinth control valve in secondary circuit flow regulation system

Nuclear Engineering and Design

DOI

2024

The research of multi-dimensional flow mapping for proportional flow control valve based on long short-term memory network

Journal of Physics Conference Series

DOI

2023

冷热气流混合容腔温控系统建模及特性分析

《液压与气动》

2023

串联囊式衰减器脉动抑制性能的高精度计算方法

《液压与气动》

2023

Numerical simulation of water hammer characteristics in the closing process of electric globe valve based on CFD

International Conference on Fluid Power and Mechatronics

DOI

2023

Surrogate-based optimization design for surface texture of helical pair in helical hydraulic rotary actuator

Scientific Reports

DOI

2023

Multi-Objective Optimization of Two-Stage Helical Pairs in Helical Hydraulic Rotary Actuator Using Ensemble of Metamodels and NSGA-II

Actuators

DOI

2023

Adaptive Super-Twisting Sliding Mode Control of Underwater Mechanical Leg with Extended State Observer

Actuators

DOI

2023

Fuzzy control of temperature in gas flow control system based on mixed cold and hot gases

International Communications in Heat and Mass Transfer

DOI

2023

Dynamic compensation by coupled triple-thermocouples for temperature measurement error of high-temperature gas flow

Transactions of the Institute of Measurement and Control

DOI

2023

Finite-time active disturbance rejection control for high-pressure pneumatic servo system subject to matched and mismatched disturbances

International Conference on Fluid Power and Mechatronics

DOI

2023

Design and Flow Characteristics Simulation of Supercritical Carbon Dioxide Flow Control Valve

International Conference on Fluid Power and Mechatronics

DOI

2023

Flow Characteristics Optimization of Large-Range Linear Adjustable High-Pressure Air Flow Control Valve

International Conference on Fluid Power and Mechatronics

DOI

2023

Simulation Study on Impact of Piston Pressure Feedback Orifice on Flow Characteristics of High-Pressure Pneumatic Reducing Valve

International Conference on Fluid Power and Mechatronics

DOI

2023

Nonlinear Load Force Compensation Method of Granular Materials Compaction Hydraulic Press Based on Cancellation Mechanism

International Conference on Fluid Power and Mechatronics

DOI

2023

Study on the Decoupling Control Strategy of the Airflow Temperature Control System

International Conference on Fluid Power and Mechatronics

DOI

2023

Optimization of the Novel Three-Stage Throttling Groove of Proportional Spool Valve Based on the Multi-Objective Particle Swarm Optimization Algorithm

International Conference on Fluid Power and Mechatronics

DOI

2023

High-Precision Flow Control for Lung Simulator

International Conference on Fluid Power and Mechatronics

DOI

2023

Design of High-Temperature Gas Mixing Device Based on Tesla-Type Channel

International Conference on Fluid Power and Mechatronics

DOI

2022

Multi structural parameter analysis based on the labyrinth valve design with high pressure drop and low noise

Flow Measurement and Instrumentation

DOI

2022

Noise optimization of multi-stage orifice plates based on RBF neural network response surface and adaptive NSGA-II

Annals of Nuclear Energy

DOI

2022

Numerical and Experimental Investigation of the Conjugate Heat Transfer for a High-Pressure Pneumatic Control Valve Assembly

Entropy

DOI

2022

Measurement of the mass-flow-rate characterization parameters of high-pressure pneumatic servo slide valves

Scientific Reports

DOI

2021

电驱高压气动减压阀动态特性仿真研究

《液压与气动》

2021

高压电-气伺服阀间隙结构的零位泄漏特性（英文）

Journal of Central South University

2021

泵喷推进水下滑翔机尾舵设计及仿真分析

《数字海洋与水下攻防》

DOI

2021

Prescribed Performance Non-Singular Fast Terminal Sliding Mode Control Based on Extended State Observer for a Deep-Sea Electric Oil-Filled Joint Actuator

Applied Sciences

DOI

2021

Numerical and experimental investigation of leakage behavior at null position of high-pressure electro-pneumatic servo valve

Journal of Central South University

DOI

2021

Adaptive Fuzzy Robust Control of a Bionic Mechanical Leg With a High Gain Observer

IEEE Access

DOI

2020

大通径气动截止阀启闭过程流动特性研究及低噪声优化

《液压与气动》

2020

大减压比高压气动比例减压阀阻尼孔耦合特性仿真研究

《液压与气动》

2020

自适应渐进结构优化法的调节阀结构研究

《北京理工大学学报》

DOI

2020

A hydrodynamic prediction model of throttle orifice plate using space filling and adaptive sampling method

Structural and Multidisciplinary Optimization

DOI

2020

Adaptive Backstepping Control of Vacuum Servo System Using High-Speed on-off Valves

IEEE Access

DOI

2019

高压气动系统负载容腔压力伺服控制仿真研究

《液压与气动》

2019

Multi-objective Optimization Design Method for Valve Plate Structure of Micro Piston Pump

DOI

2019

Optimization Coupled with Mass Reduction and Lifecycle Improvement of Air Compressor Piston using Design of Experiments

DOI

2019

Prediction of the Multistage Throttle Orifice Plate Flow Characteristics based on Computational Fluid Dynamics and Neural Network Model

DOI

2019

Multi-objective optimization of structural parameters design of vacuum cylinder

DOI

2019

Research on Active Disturbance Rejection Control of High-pressure Electro-pneumatic Servo Valve Based on NSGA-II Parameter Tuning

DOI

2019

Cavitation optimization of a throttle orifice plate based on three-dimensional genetic algorithm and topology optimization

Structural and Multidisciplinary Optimization

DOI

2018

Bi-directional evolutionary topology optimization for designing a neutrally buoyant underwater glider

Engineering Optimization，Vol. 500, No. 8

DOI

2018

新型液压消声器吸收液压系统压力脉动的机理和特性

《吉林大学学报(工学版)》

2018

海流对水下滑翔机运动参数的影响

《海军工程大学学报》

2018

喷水推进型水下滑翔机的水平翼参数配置及定常运动分析

《浙江大学学报(工学版)》

2018

Dynamic vacuum pressure tracking control with high-speed on-off valves

Proceedings of the Institution of Mechanical Engineers Part I Journal of Systems and Control Engineering

DOI

2018

Acoustic attenuation performance prediction and analysis of bladder style hydraulic noise suppressors

Applied Acoustics

DOI

2017

转盘钻机液压顶驱主液压动力系统性能研究

《机床与液压》

2017

喷泵型水下滑翔机垂直面内定常运动特性计算

《华中科技大学学报(自然科学版)》

2017

水下滑翔机定常螺旋回转运动特性分析

《中国造船》

2017

Asymmetric Fuzzy Control of a Positive and Negative Pneumatic Pressure Servo System

Chinese Journal of Mechanical Engineering

DOI

2016

流体特性对周期管路弯曲振动带隙的影响

《机床与液压》

2016

直角截止阀噪声特性分析及优化设计

《液压与气动》

2016

Theoretical and Experimental Investigation of Flexural Vibration Transfer Properties of High-Pressure Periodic Pipe

Chinese Physics Letters

DOI

2016

水下滑翔机水动力外形优化配置

《武汉理工大学学报(交通科学与工程版)》

2016

Research on the vibration band gaps of isolators applied to ship hydraulic pipe supports based on the theory of phononic crystals

The European Physical Journal Applied Physics

DOI

2015

极低静压模拟系统非对称模糊自调整PID控制

《液压与气动》

2015

基于AMESim的柱形壳体横摇试验系统建模与仿真研究

《液压与气动》

2015

基于遗传算法的旋塞阀液压缸缓冲优化研究

《液压与气动》

2015

变刚度电液力负载模拟器自适应反步控制

《液压与气动》

2015

囊式空气弹簧刚度特性研究

《液压与气动》

2015

水下滑翔机深度模拟装置仿真及实验研究

《液压与气动》

2015

大型液压阻尼器试验台架设计及分析

《液压与气动》

2015

基于阀门开度的水下闸阀摩擦力负载模型研究

《华中科技大学学报(自然科学版)》

2015

Optimization of internal flow channel of a right-angle globe valve based on CFD

International Conference on Fluid Power and Mechatronics

DOI

2015

Research on cross-coupled synchronization fuzzy control of double valve

International Conference on Fluid Power and Mechatronics

DOI

2015

A Strongly Coupled Fluid Structure Interaction Solution for Transient Soft Elastohydrodynamic Lubrication Problems in Reciprocating Rod Seals Based on a Combined Moving Mesh Method

Journal of Tribology

DOI

2014

深海滑翔机水下气动布放技术研究

《液压与气动》

2014

基于反馈线性化的高压大流量气动阀阀芯位置伺服控制研究

《液压与气动》

2014

高空大气压力模拟系统自适应鲁棒控制

《华中科技大学学报(自然科学版)》

2014

基于图论的船舶海水冷却管网水力特性

《舰船科学技术》

2014

负压伺服控制系统的自调整模糊PID控制

《华中科技大学学报(自然科学版)》

2014

Feedback linearization-based self-tuning fuzzy proportional integral derivative control for atmospheric pressure simulator

Proceedings of the Institution of Mechanical Engineers Part I Journal of Systems and Control Engineering

DOI

2013

直压式温度补偿气密检测装置研究

《液压与气动》

2013

Study on the influence of flow force on a large flowrate directional control valve

IFAC Proceedings Volumes

DOI

2012

船用浮动式球形转叶式舵机性能仿真(英文)

《机床与液压》

2012

高压大流量气动比例阀稳态气动力数值研究

《液压气动与密封》

2012

考虑进口特性的蓄能器吸收压力脉动动态特性研究

《液压与气动》

2011

基于LabVIEW的直压检漏系统温度影响试验研究

《液压与气动》

2011

流量自动限制装置试验系统研究

《液压与气动》

2010

舵机电液伺服调节器水击仿真研究

《机床与液压》

2010

某系统液压集成块流道液流特性分析

《机床与液压》

2010

高压大流量气动电磁换向阀原理及动态特性

《华中科技大学学报(自然科学版)》

2008

大气温度模拟系统研究

《机床与液压》

2008

管道非恒定流动数值模拟研究

《液压与气动》

2008

新型高压电-气比例阀设计及性能分析

《液压与气动》

2008

高压电-气流量伺服阀压力-流量特性分析

《机床与液压》

2008

新型高压电-气比例阀缓冲气控腔性能分析

《机床与液压》

2008

Application of PC/104 Embedded Computer to Air Pressure Control Device

DOI

2008

THE RESEARCH AND APPLICATION OF HYDRAULICS AND PNEUMATICS IN HUAZHONG UNIVERSITY OF SCIENCE AND TECHNOLOGY

Proceedings of the JFPS International Symposium on Fluid Power

DOI

2007

新型高压气动比例控制阀动态性能的仿真研究

《中国机械工程》

2007

基于AMEsim和Simulink的电液位置/力混合控制仿真研究

《机床与液压》

2007

气动人工肌肉刚度特性的分析

《机床与液压》

2007

电动加载系统多余力特性分析

《机床与液压》

2007

Theoretic Analysis of Stiffness Characteristics of the Pneumatic Muscle Actuator

Machine Tool & Hydraulics

2007

THEORETICAL AND EXPERIMENTAL STUDY ON THE PRESSURE AND VACUUM CONTINUOUS CONTROL SYSTEM BASED ON HYBRID PUMP

2006

一种高速气缸模型的仿真研究

《机床与液压》

2006

基于模糊控制的正负压连续控制系统研究

《液压与气动》

2006

气动人工肌肉位置控制策略

《华中科技大学学报(自然科学版)》

2006

高压气动容腔缓冲调压控制的研究

《机床与液压》

2006

Research on Pneumatic Muscle Actuators Linear Joint

Machine Tool & Hydraulics

2005

气动人工肌肉静态特性实验研究

《液压与气动》

2005

基于模糊控制的气体温度控制系统的研究

《液压与气动》

2005

气密自动检测装置的研究

《液压与气动》

2005

阀控缸一体化元件的响应时间分析

《流体传动与控制》

2004

气动人工肌肉系统控制性能的实验研究

《华中科技大学学报(自然科学版)》

2004

摆动气缸位置伺服控制系统的建模与仿真

《机床与液压》

2004

密闭容腔压力伺服控制系统理论与实验研究

《液压与气动》

2004

基于CMAC的气动人工肌肉变结构位置控制研究

《机械工程学报》

2003

气动人工肌肉执行系统动态特性的实验研究

《液压气动与密封》

2002

气体温度高精度实时控制的实验研究

《液压与气动》

2002

高压气动位置伺服系统的控制策略研究

《液压气动与密封》

2002

气动人工肌肉特性分析的新方法

《液压与气动》

2001

水下转动角度控制装置研究

《液压气动与密封》

2000

高精度压力伺服控制系统研究

《液压气动与密封》

2000

电—气比例流量阀特性分析及研究

《机床与液压》

2000

现场总线技术在气动控制系统中的应用

《机床与液压》

1999

高压气动压力控制阀中的膜片设计

《华中科技大学学报(自然科学版)》

1999

电-气比例技术在拖船主机遥控系统中的应用

《液压与气动》

1997

一种气动压力控制阀的仿真与实验

《机床与液压》

1996

气动位置伺服系统的高精度控制研究

《机床与液压》

1994

气动伺服控制系统的稳态特性分析方法

《液压气动与密封》

1994

气动位置伺服系统的自校正自适应研究

《自动化技术与应用》

2016

泵控型液压操舵系统低冲击优化控制研究

《第九届全国流体传动与控制学术会议（9th FPTC-2016）》

2010

气泡雾化喷嘴注气管流动特性研究

《中国机械工程学会流体传动与控制分会第六届全国流体传动与控制学术会议论文集》

2010

流量限制装置抗冲击特性建模与仿真分析

《中国机械工程学会流体传动与控制分会第六届全国流体传动与控制学术会议》

2010

某水下航行器舵机液压伺服系统建模仿真

《中国机械工程学会流体传动与控制分会第六届全国流体传动与控制学术会议》

2010

高压气体定容积充放气特性研究

《中国机械工程学会流体传动与控制分会第六届全国流体传动与控制学术会议》

2010

瞬态压力突变下管道振动研究

《中国机械工程学会流体传动与控制分会第六届全国流体传动与控制学术会议》

2010

船舶舵机电液伺服调节器控制性能优化研究

《中国机械工程学会流体传动与控制分会第六届全国流体传动与控制学术会议》

2010

FADS测压管路动态响应特性分析

《中国机械工程学会流体传动与控制分会第六届全国流体传动与控制学术会议》

2008

基于AMESim的流量自动限制阀试验系统的仿真研究

《第五届全国流体传动与控制学术会议暨2008年中国航空学会液压与气动学术会议论文集》

2008

浮力调节装置实验研究

《第五届全国流体传动与控制学术会议暨2008年中国航空学会液压与气动学术会议论文集》

2008

双活塞缸式气动高压发生装置的建模仿真与实验研究

《第五届全国流体传动与控制学术会议暨2008年中国航空学会液压与气动学术会议》

2006

气动人工肌肉驱动的直线关节的研究

《第四届全国流体传动与控制学术会议论文集》

2006

基于AMEsim／Simulink的电液位置／力混合控制仿真研究

《第四届全国流体传动与控制学术会议论文集》

2024

Cfd Modeling of Supersonic Condensation Flow of Moist Air in a High-Pressure Air Pressure Reduction Valve

SSRN Electronic Journal

DOI