李昊真，肖行志，廖文和，刘婷婷（2026）. 优化热输入提升玻纤强化聚醚醚酮增材制造层间结合（英文）. Transactions of Nanjing University of Aeronautics and Astronautics.
Zhi-Guang Zhu, Yuntian Ning, M. J. Paul, Qiang Li, Punit Kumar, Wenhe Liao, U. Ramamurty (2026). Fracture toughness and crack resistance of laser powder bed fused Al-Mg-Sc-Zr alloy: Effect of precipitate and bimodal grain structure. Scripta Materialia.DOI
Xiao-Yu Sun, Jie Han, Qiang Li, Zengkun Li, Wei-Cheng Xiao, Tao Yang, G. Sha, Wenhe Liao, Zhi-Guang Zhu, U. Ramamurty (2026). TiC addition enhances thermal stability and mitigates intermediate-temperature embrittlement in Al–Ce–Ni additively manufactured via laser powder bed fusion. Acta Materialia.DOI
Ming-Hui Pan, Xian-Tong Li, Xiang-Fei Li, Kang-Le Liang, Zhiqiang Chen, Xiao-Peng Li, Wenhe Liao (2026). Fracture mechanism and multiscale response properties in T-welded joint with a comprehensive constitutive framework and crystal plasticity model considering strain-rate/temperature effect. Engineering Failure Analysis.DOI
Xiaohua Zhang, Wei Jun Hng, Keck Voon. Ling, Wenhe Liao, Wee Seng Lim, Zhengliang Lu, Xi Zhang (2026). Mission Planning for Very-Low-Earth-Orbit Technology Exploration of ELITE with Collision Avoidance Ability. Space Science & Technology.DOI
Ruijiang Fan, Wenhe Liao, Dawei Li, Tingting LIU, Kan Zheng (2026). A hybrid AI-driven framework for wide-angle low-RCS stealth satellite design and adjustable nose cone implementation. Chinese Journal of Aeronautics.DOI
Gang Wang, Dawei Li, Wenhe Liao, Tingting Liu, Changdong Zhang, Yutong Huang, Yingzhi Xiong (2026). Optimal design and application of multistable reconfigurable electromagnetic absorbing metamaterial. Composite Structures.DOI
Xinze Shen, Changdong Zhang, Weimin Jiang, Kanghui Song, Xudong Li, Yang Zhendong, Wenhe Liao, Dawei Li, Tingting Liu (2026). Monotonicity-constrained Bézier surrogates for thermoelastic multiscale optimization of heterogeneous lattices. Computer Methods in Applied Mechanics and Engineering.DOI
Jiansen Li, Kai Zhang, Tingting Liu, Rong Wang, Yun Shi, Wenhe Liao (2026). In-situ monitoring and detection of lack of fusion defects in laser powder bed fusion complex components using melt pool images. Additive Manufacturing Frontiers.DOI
Liuhao Miao, Huiliang Wei, Zhousen Cai, X.C. Li, Zhiguang Zhu, Xiebin Wang, Tingting Liu, Wenhe Liao (2026). Laser powder bed fusion of TiCN reinforced FeCoCrNiMn high-entropy alloy: Superior mechanical properties and microstructural mechanisms. Journal of Alloys and Compounds.DOI
Qingyuan Yin, 曾瑞圳 Zeng Ruizhen, Tingting Liu, Wenhe Liao, Huiliang Wei (2026). Complex defect evolution modes during laser powder bed fusion. International Journal of Mechanical Sciences.DOI
Hao Li, Kuan Lu, Baihong Chi, Wenhe Liao (2026). Structure-Circuit Integrated Manufacturing of Conformal Conductive/Dielectric Electromagnetic Metamaterials for Aircraft Skins. International Conference on Mechatronics Technology and Intelligent Manufacturing (ICMTIM).DOI
Wenkai Zu, Xingzhi Xiao, Haibin Tang, T. T. Liu, Yifan Sun, Wenhe Liao (2026). Understanding the Interlayer Behavior of Fused Deposition Molded Polyether‐Ether‐Ketone: Multiscale Prediction and Experimental Analysis. Advanced Engineering Materials.DOI
Qing An, Sen Zhang, Dawei Li, Wenhe Liao, Tingting Liu, Weiping Li, Junming Zhao (2026). Insights for improving the additive manufacturing fabrication accuracy of electromagnetic wave-absorbing metastructure with dipping process. Additive Manufacturing Frontiers.DOI
Zhongkai Ji, Dawei Li, Xiaoya Zhai, Jie Gao, Yunlong Tang, Ning Dai, Wenhe Liao, Yong Zhao, Yi Min Xie (2026). Designing anisotropic mechanical metamaterials and metastructures: a review. Thin-Walled Structures.DOI
Jiwei Zhu, Kai Zhang, Tingting Liu, Jie Li, Zhiyong Zhou, Wenhe Liao (2026). Predicting melt pool geometry dimensions of AlSi10Mg single track in laser powder bed fusion using coaxial high-speed camera signals. Additive Manufacturing Frontiers.DOI
Sen Zhang, Qing An, Dawei Li, Ke Chen, Junming Zhao, Tian Jiang, Wenhe Liao, Tingting Liu, Yijun Feng (2026). A low-RCS coding metasurface utilizing 3-D printed ABS shells and carbonyl iron powder/polyimide composite patches via hybrid mechanisms. Materials Horizons.DOI
Daiyang Gao, Guangyuan Shi, Wenhe Liao (2026). Theoretical and Experimental Research on Spectral Method for Random Vibration Fatigue Life Prediction of Welded Joints. Lecture notes in mechanical engineering.DOI
Kanghui Song, Changdong Zhang, Tingting Liu, Wenhe Liao (2026). High-Precision and Efficient Modeling and Computational Strategies for Large-Scale Lattice Structures in Mechanical Metamaterials. Mechanisms and machine science.DOI
WANG Kangshuai, Huiliang Wei, WU Yuefeng, 时家明 Shi Jiaming, LIU Tingting, Liao Wenhe (2026). Study on the Energy Absorption of Eutectic High Entropy Alloy AlCoCrFeNi 2.1 TPMS Lattice Structures Fabricated by Laser Powder Bed Fusion. Journal of Mechanical Engineering.DOI
Zhanxiao Liu, Haibo Yang, Wenhe Liao, Chang Xu (2026). Experimental and numerical study of a scaled radiative fixture for equivalent thermal testing in complex radiative environments. International Communications in Heat and Mass Transfer.DOI
Bo Li, Pinzhang Wang, Yufei Li, Wei Tian, Wenhe Liao (2025). Neural-network-based trajectory error compensation for industrial robots with milling force disturbance. International Journal Of Computer Integrated Manufacturing, Vol. 380, No. 8.DOI
Chenxin Su, Bo Li, Wei Zhang, Wei Tian, Wenhe Liao (2025). An analysis and reliability-based optimization design method of trajectory accuracy for industrial robots considering parametric uncertainties. Reliability Engineering & System Safety, Vol. 254.DOI
Daiyang Gao, Yuming Huang, Wenhe Liao (2025). A critical distance parameter for random vibration fatigue life estimation of notched metallic structures in the frequency domain. International Journal of Mechanical System Dynamics.DOI
Daiyang Gao, Yuming Huang, Wenhe Liao, Chao You, Jianxin Zhang, Qiang Wang (2025). Fatigue failure analysis and estimation on a motor hanger of high-speed train with the spectral traction structural stress. Engineering Failure Analysis.DOI
Ming-Hui Pan, Yu-Chuan Li, Wen-Tao Chen, Ao-Lin Sun, Xian-Tong Li, Xiang-Fei Li, Wenhe Liao, Wen-Cheng Tang (2025). Microstructure evolution, mechanical properties of T-welded joint for different TIG welding currents and process parameters optimization with GWO algorithm. The International Journal of Advanced Manufacturing Technology.DOI
Yuntian Ning, Qiang Li, Xiao-Yu Sun, Chunlu Zhao, Zhen-Min Li, Wenhe Liao, Zhi-Guang Zhu, U. Ramamurty (2025). Portevin–Le Chatelier effect in additively manufactured Al–Mg–Sc–Zr alloy: Effects of temperature, strain rate, and microstructure. Journal of Materials Science & Technology.DOI
Jin Ni, Yongjun Yu, Wenhe Liao, Hongming Zhang, Bing Xu (2025). Analysis and Implementation of QEMU-Based ARM Device Virtualization for Integrated Electronic Embedded Systems in Micro/Nano Satellites.DOI
Haolin Liu, Qunhui Liu, Shikun Jiao, Ziang Chen, Tingting Liu, Wenhe Liao, Huiliang Wei (2025). Investigation of spatiotemporal variations of local structural loss for laser powder bed fusion of unsupported topological structures via multi-source data mapping. Journal of Manufacturing Processes.DOI
Hongming Zhang, Yongjun Yu, Wenhe Liao, Jin Ni (2025). Implementation of a Visualization Platform for Integrated Electronic Digitalization Technology of Micro-Nano Satellites Based on Cesium.DOI
Xiaohua Zhang, Lance Gregorie Balansag Talam, Keck Voon Ling, Wenhe Liao, Wee Seng Lim, Zhengliang Lu, Xiang Zhang (2025). Power Optimization and Control for ELITE Based on Robust PWA Multiplexed MPC and Differential Evolution. Space Science & Technology.DOI
Daiyang Gao, Guangyuan Shi, Wenhe Liao (2025). Frequency-Domain Approach for Predicting Random Vibration Fatigue Life of Spacecraft Honeycomb Sandwich Structure Considering Fatigue Property Dispersion.DOI
Xinze Shen, Changdong Zhang, Wenhe Liao, Dawei Li, Tingting Liu (2025). Configuration-decoupled concurrent topology optimization of heterogeneous lattice structures. Computer Methods in Applied Mechanics and Engineering.DOI
Haolin Liu, Haolin Liu, Huiliang Wei, Qingyuan Yin, Jiashun Yue, Tingting Liu, Wenhe Liao (2025). Formation mechanisms and control strategies of geometric errors induced by edge bumping during laser powder bed fusion. Additive manufacturing.DOI
Shuhui Fan, Xiang Zhang, Wenhe Liao (2025). Distributed Impulsive Multi-Spacecraft Approach Trajectory Optimization Based on Cooperative Game Negotiation. Aerospace.DOI
Chang Su, Qingyuan Yin, Haolin Liu, Qunhui Liu, Shikun Jiao, Ziang Chen, Tingting Liu, Wenhe Liao, Huiliang Wei (2025). Mechanisms and elimination strategies of overhang closure failure during support-free laser powder bed fusion. Materials & Design.DOI
Zhenwen SUN, Kan Zheng, Wenhe Liao, Song Dong (2025). Effects of ultrasonic vibration-assisted on accuracy of robotic rotary countersinking. Chinese Journal of Aeronautics.DOI
Liuhao Miao, Huiliang Wei, Jiashun Yue, Rong Chen, Yuanhong Qian, Xiaopeng Li, Zhiguang Zhu, Tingting Liu, Wenhe Liao (2025). Superior mechanical properties of a high temperature Co-based superalloy fabricated by laser powder bed fusion. Additive Manufacturing Letters.DOI
Ziyi Liu, Hai Bo Yang, Shengbao Wu, Chang Chun Xu, Zhezheng Chen, Wenhe Liao (2025). Thermal design and equivalent thermal equilibrium testing method for attached micro/nano satellites. Applied Thermal Engineering.DOI
Jiashun Yue, Jinhui Xu, Ziang Chen, Chaoqun Song, Tingting Liu, Wenhe Liao, Huiliang Wei (2025). Formation mechanisms and mitigation strategies of internal void defects during laser powder bed fusion of thin walls. Science and Technology of Welding & Joining.DOI
Mingyu Kenneth Li, Pengcheng Li, Qi Zhang, Wei Tian, Ruihao Kang, Yansheng Cao, Zhengwei Wang, Wenhe Liao (2025). A dynamic velocity planning methodology incorporating round-off error elimination strategy for micro line segments. The International Journal of Advanced Manufacturing Technology.DOI
Li-yi Jiang, Chao-yi Shen, Tingting Liu, Chang-dong Zhang, Xiang Dong Su, Weiwei L. Xu, B.L. Wang, Zhixiang Qi, Wenhe Liao (2025). Effect of CNT content on microstructure and tribological properties of CNTs/AlSi10Mg composites by LPBF. China Foundry.DOI
Jing Shu, Wenhe Liao, Kan Zheng, Zhongmin Xiao, Song Dong (2025). Investigation on ablation resistance of C/C composites throat in solid rocket motor machined by rotary ultrasonic. International Communications in Heat and Mass Transfer.DOI
Sen Zhang, Qing An, Dawei Li, Ke Chen, Junming Zhao, Tian Jiang, Pïng Chen, Wenhe Liao, Tingting Liu, Yijun Feng (2025). Multifunctional meta-absorber based on CB-PLA composite and magnetic materials for electromagnetic absorption and load-bearing capacity. Composites Science and Technology.DOI
Wei Zhao, Bo Li, Wei Tian, Yunfei Miao, Wenhe Liao (2025). Investigating the effects of machining parameters on vibration in robotic milling. The International Journal of Advanced Manufacturing Technology.DOI
Mingfei Gu, Xingzhi Xiao, Tingting Liu, Gang Li, Wenhe Liao (2025). In-situ alleviation of surface modifier passivation effects in silver nanoparticle laser sintering process. Journal of Manufacturing Processes.DOI
Kanghui Song, Wenhe Liao, Dawei Li, Xudong Li, Zhendong Yang, Changdong Zhang, Tingting Liu (2025). Multi-resolution 3D heteroelement structure optimization inspired by glass sponge. Engineering Structures.DOI
Fan Shuhui, Xiang Zhang, Liao Wenhe (2025). Impulsive maneuver spacecraft pursuit-defense game based on multi-agent reinforcement learning. Journal of Systems Engineering and Electronics.DOI
Ming-Hui Pan, Wen-Tao Chen, Ao-Lin Sun, Xian-Tong Li, Xiang-Fei Li, Wenhe Liao, Wencheng Tang (2024). The crack propagation behaviors, microstructure and mechanical properties of T-welded joints for TIGW with crystal plasticity model and XFEM. Journal of Materials Research and Technology.DOI
Y.C. Lin, Xiaoming Wang, Zhuoheng Liang, Dawei Li, Tingting Liu, Wenhe Liao, Changdong Zhang (2024). Optimization design of multi-scale TPMS lattices based on geometric continuity fusion and strain energy driven. Composite Structures.DOI
Zhongkai Ji, Dawei Li, Yi Min Xie, Yong Zhao, Wenhe Liao (2024). Design and optimization of TPMS-based heterogeneous metastructure for controllable displacement field. Thin-Walled Structures.DOI
Qing An, Dawei Li, Wenhe Liao, Tingting Liu, Zhi Qu, Gang Wang, Xiangjia Li (2024). Electromagnetic Absorption Mechanism of TPMS‐Based Metastructures: Synergy Between Materials and Structures. Advanced Functional Materials.DOI
Xiaoyu Sun, Zhiguang Zhu, Minan Chen, Wengang Zhai, Wei Zhou, Fuchao Wang, Meng Chun Gao, Kai Zhang, Upadrasta Ramamurty, Tingting Liu, Wenhe Liao (2024). Additively manufactured ultrastrong and thermal-resistant Al alloy via engineering the hierarchical intermetallics. Composites Part B Engineering.DOI
Mingyu Li, Pengcheng Li, Delan Wei, Jiamei Lin, Xuewen Wei, Wei Tian, Wenhe Liao (2024). Research on dual-robot cooperative path planning for multi-material additive manufacturing. The International Journal of Advanced Manufacturing Technology.DOI
Zhiwei Xiong, Kai Zhang, Wenhe Liao, Tingting Liu, Xuanrui Liu, Zhiguang Zhu (2024). Laser powder bed fusion fabrication of TiB2-Modified Al2O3-ZrO2 eutectic ceramics: Microstructure evolution and mechanical properties. Ceramics International.DOI
Bo Li, Wei Zhao, Yunfei Miao, Wei Tian, Wenhe Liao (2024). A method for dynamic parameter identification of an industrial robot based on frequency response function. International journal of mechanical system dynamics.DOI
Ruijiang Fan, Dawei Li, Wenhe Liao, Tingting Liu, Xiangjia Li, Tengteng Tang, Junming Zhao, Tian Jiang (2024). A pattern design strategy for microwave-absorbing coding metamaterials with tortuosity and connectivity. Composites Part B Engineering.DOI
Minan Chen, Yuntian Ning, Xiaoyu Sun, Tingting Liu, Huiliang Wei, Kai Zhang, Wei Zhou, Zhiguang Zhu, Wengang Zhai, Wenhe Liao (2024). Manipulating microstructure and mechanical property during laser powder bed fusion: Multi-material, in-situ alloying, and processing. Journal of Alloys and Compounds.DOI
Xiaoyu Sun, Sihao Zou, Fuchao Wang, Meng Chun Gao, Kai Zhang, Tingting Liu, Zhiguang Zhu, Wenjun Lu, Wenhe Liao (2024). Role of TiC on the microstructure, tensile property and thermal stability of laser powder bed fusion fabricated AlSi10Mg alloy. Materials Science and Engineering A.DOI
Xiangyuan Chen, Wenhe Liao, Jiashun Yue, Tingting Liu, Kai Zhang, Jiansen Li, Tao Yang, Haolin Liu, Huiliang Wei (2024). Unveiling the layer-wise dynamics of defect evolution in laser powder bed fusion: Insights for in-situ monitoring and control. Additive manufacturing.DOI
Shuo Xu, Wenhe Liao (2024). Large angle attitude control of cubesat based on multi-objective optimization. Journal of Physics Conference Series.DOI
Haojie Luo, Maosong Wang, Wenhe Liao, Yulei Du (2024). Unraveling the interrelation between process parameters and defects to enhance the strength of laser additively manufactured CuZrAlTi bulk metallic glass. Journal of Materials Research and Technology.DOI
Chuangge Wang, Danhe Chen, Wenhe Liao (2024). Research on maneuver strategy in satellite observation and counter-observation game. Advances in Space Research.DOI
Zhongkai Ji, Dawei Li, Changdong Zhang, Yi Min Xie, Wenhe Liao (2024). AI-aided design and multi-scale optimization of mechanical metastructures with controllable anisotropy. Engineering Structures.DOI
Chengtao Sun, Dawei Li, Tingting Liu, Qing An, Changdong Zhang, Yaoyao Li, Wenhe Liao (2024). Design of functionally gradient metastructure with ultra-broadband and strong absorption. Composites Part B Engineering.DOI
Desti Dorion Likoundayenda Bakoutas, Kai Zhang, Tingting Liu, Shurui Li, Zhiwei Xiong, Wenhe Liao (2024). Influence of additives and stoichiometry amounts in the manufacturing of Ti2AlC components by laser powder bed fusion process combined with pressureless sintering. Ceramics International.DOI
Yuandong Hu, Dairu Han, Zhengliang Lu, Wenhe Liao (2024). Constraint tightening-based control for small-satellite formations using differential aerodynamic forces. Advances in Space Research.DOI
Guanyu Sun, Zhenchao Qi, Wei Tian, Wenhe Liao, Yanxin Xu (2024). Assembly deviation analysis of satellite flexible parts integrating rigid and flexible properties: Modeling and experiment. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture.DOI
R. B. Yang, Xingzhi Xiao, Wenhe Liao, Tingting Liu (2024). A wide-angle broadband dual-polarization electromagnetic absorbing structure based on the carbonyl iron powder/polydimethylsiloxane composites. Journal of Magnetism and Magnetic Materials.DOI
Haojie Luo, Aoqi Fan, Wenhe Liao, Yulei Du (2024). Effect of laser power on the structure and wear performance of laser additively manufactured Cu45Zr45Al6Ti4 metallic glass coating. Surface and Coatings Technology.DOI
Xin Shi, Weimin Jiang, Kanghui Song, Changdong Zhang, Tingting Liu, Wenhe Liao (2024). Energy Absorption Capability of Graded Hybrid Triply Periodic Minimal Surface Structures Based on Fracture Zone Controlling. Advanced Engineering Materials.DOI
Yang Zhendong, Changdong Zhang, Wenhe Liao, Tingting Liu, Hao Frank Yang (2024). Efficient and exquisite concurrent optimization of hierarchical structures with non-uniform eccentric body centered cubic lattice. Computer Methods in Applied Mechanics and Engineering.DOI
Wei Zhao, Bo Li, Wei Tian, Peng Liu, Wenhe Liao (2024). Magnetorheological elastomer absorber-based chatter suppression in robotic milling. Robotics and Computer-Integrated Manufacturing.DOI
Ming Li, Wei Tian, Wenhe Liao (2024). Fatigue properties of riveted joints under different hole perpendicularity errors and squeeze forces. Microscopy Research and Technique.DOI
Kai Zhang, Shurui Li, Tingting Liu, Zhiwei Xiong, Zhiguang Zhu, Yang Zhang, Abid Ullah, Wenhe Liao (2024). Broadening the microstructure regime of Al2O3–ZrO2 hypereutectic ceramic fabricated via laser powder bed fusion. Smart Materials in Manufacturing.DOI
Hao Zhou, Haibo Yang, Songlin Yang, Xiaochun Yin, Wenhe Liao (2024). Study on the Dynamic Response of the Solar Panel Adsorption Device to the Satellite System During the Attachment Process. Lecture notes in mechanical engineering.DOI
Ronghua Du, Wenhe Liao, Xiang Zhang (2023). Optimal Maneuver Strategy to Improve the Observability of Angles-Only Rendezvous. Journal Of Systems Engineering And Electronics, Vol. 34, No. 4.DOI
Zhiyuan Zhang, Hanyu Deng, Wenhe Liao, Bin Yu, Zai Yu (2023). Ignition processes and characteristics of charring conductive polymers with a cavity geometry in precombustion chamber for applications in micro/nano satellite hybrid rocket motors. Defence Technology.DOI
Ming-Zhi Zhao, Hui-Liang Wei, Yiming Mao, Chang-Dong Zhang, Ting-Ting Liu, Wenhe Liao (2023). Predictions of Additive Manufacturing Process Parameters and Molten Pool Dimensions with a Physics-Informed Deep Learning Model. Engineering.DOI
Chang-Chun Zhang, Ting-Ting Liu, Wenhe Liao, Hui-Liang Wei, Ling Zhang (2023). Investigation of the Laser Powder Bed Fusion Process of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si Alloy. Chinese Journal of Mechanical Engineering.DOI
Ming-Hui Pan, Yuchao Li, Si-Yuan Sun, Wenhe Liao, Y. Xing, Wen-Cheng Tang (2023). Tensile Behaviors and Mechanical Property Analyses of T-Welded Joint for Thin-Walled Parts in Consideration of Different TIG Welding Currents Using Multiple Damage Models and Fracture Criterions: Numerical Simulation and Experiment Validation. Materials.DOI
Zhiguang Zhu, Zhi-Heng Hu, H. Seet, Tianyu Liu, Wenhe Liao, U. Ramamurty, Sharon Mui Ling Nai (2023). Recent progress on the additive manufacturing of aluminum alloys and aluminum matrix composites: Microstructure, properties, and applications. International journal of machine tools & manufacture.DOI
Dan Meng, Wenhe Liao, Song Dong (2023). Investigation on fiber fracture mechanisms in rotary ultrasonic milling of carbon fiber composites. The International Journal of Advanced Manufacturing Technology.DOI
Asif Ur Rehman, Abid Ullah, Tingting Liu, Rashid Ur Rehman, M. Salamci, Wenhe Liao (2023). Selective laser oxidation sintering of cuprous oxide. Materials Letters: X.DOI
Qin Yin, Hui-Liang Wei, Rong Chen, Zhi-Yong Li, Jin-Hui Xu, T. Liu, Wenhe Liao (2023). Interdependent evolution of deformation, fracture and recovering deposition during laser powder bed fusion. Additive Manufacturing.DOI
Shurui Li, Kai Zhang, Zhi-Chao Yan, Tingting Liu, Zhiguang Zhu, Zhiwei Xiong, Zhi-Yong Zou, Jian-Sen Li, Wenhe Liao (2023). Effect of Nb addition on the microstructure and mechanical properties of additively manufactured Ti2AlC MAX-phase ceramic matrix composites. Additive Manufacturing.DOI
Maosong Wang, Yu-Lei Du, Hui-Liang Wei, Wenhe Liao (2023). From crack-prone to crack-free: eliminating cracks in additively manufactured Ti-48Al-2Cr-2Nb alloy by adjusting phase composition. Materials & Design.DOI
Xing-xiao Zhu, Zhiguang Zhu, T. Liu, Wenhe Liao, Yu-Lei Du, Hui-Liang Wei (2023). Crack-free and high-strength AA2024 alloy obtained by additive manufacturing with controlled columnar-equiaxed-transition. Journal of Materials Science & Technology.DOI
Q. An, Da-Wei Li, Wenhe Liao, T. Liu, Dylan Joralmon, Xiang-Jia Li, Junming Zhao (2023). A Novel Ultra‐Wideband Electromagnetic‐Wave‐Absorbing Metastructure Inspired by Bionic Gyroid Structures. Advances in Materials.DOI
Zhiwei Xiong, Kai Zhang, Zhiguang Zhu, Tingting Liu, Yang Zhang, Shurui Li, Wenhe Liao (2023). Effect of laser focus shift on the forming quality, microstructure and mechanical properties of additively manufactured Al2O3–ZrO2 eutectic ceramics. Ceramics International.DOI
Tao Yang, Xiangyuan Chen, Tingting Liu, Huiliang Wei, Zhiguang Zhu, Wenhe Liao (2023). Effect of processing parameters on overhanging channel forming quality during laser powder bed fusion of AlSi10Mg. Journal of Manufacturing Processes.DOI
Shuxiang Zhang, Haibin Tang, Danna Tang, Tingting Liu, Wenhe Liao (2023). Effect of fabrication process on the microstructure and mechanical performance of carbon fiber reinforced PEEK composites via selective laser sintering. Composites Science and Technology.DOI
Xiangyuan Chen, Wenhe Liao, Huiliang Wei, Zhiguang Zhu, Tao Yang, Changdong Zhang, Tingting Liu (2023). Formation mechanisms and control strategies of metallurgical defects and microstructures during laser powder bed fusion of AlSi10Mg lattice structures. Journal of Materials Research and Technology.DOI
Maosong Wang, Haojie Luo, Yulei Du, Wenhe Liao, Yu Deng (2023). Structural transformation behavior in a high Nb–TiAl alloy additively manufactured by laser powder bed fusion. Journal of Materials Research and Technology.DOI
Tao Yang, Xiangyuan Chen, Tingting Liu, Huiliang Wei, Zhiguang Zhu, Yulei Du, Yang Cao, Changdong Zhang, Wenhe Liao (2023). Crack-free high-strength AA-7075 fabricated by laser powder bed fusion with inoculations of metallic glass powders. Materials Science and Engineering A.DOI
Tao Yang, Xiangyuan Chen, Tingting Liu, Zhiguang Zhu, Huiliang Wei, Yulei Du, Changdong Zhang, Wenhe Liao (2023). Characterization of crack-free AA-7075 fabricated by laser powder bed fusion with addition of Zr50.7Cu28Al12.3Ni9 metallic glass. Materials Letters.DOI
Xiaoyu Sun, Minan Chen, Tingting Liu, Kai Zhang, Huiliang Wei, Zhiguang Zhu, Wenhe Liao (2023). Characterization, preparation, and reuse of metallic powders for laser powder bed fusion: a review. International Journal of Extreme Manufacturing.DOI
Gang Wang, Dawei Li, Tingting Liu, Changdong Zhang, Yi Min Xie, Wenhe Liao (2023). Design and manufacturing of lightweight modular broadband microwave absorbing metastructure. Composites Part B Engineering.DOI
Gang Li, Xingzhi Xiao, Tingting Liu, Mingfei Gu, Rong Dai, Wenhe Liao (2023). Three-Dimensional Morphology and Contour Quality of Conductive Lines Printed by High-Viscosity Paste Jetting. Langmuir.DOI
Zhiyong Zou, Kai Zhang, Zhiguang Zhu, Tingting Liu, Jiansen Li, Zhiwei Xiong, Shurui Li, Wenhe Liao (2023). Multi-sensor monitoring of powder melting states via melt pool optical emission signals during laser-based powder bed fusion. Optics & Laser Technology.DOI
Haozhen Li, Xingzhi Xiao, Wenhe Liao, Tingting Liu, Gang Li (2023). Numerical Simulation and Experimental Study Regarding the Cross-Sectional Morphology of PEEK Monofilament Deposition During FDM-Based 3D Printing. Langmuir.DOI
Zihang Wang, Xiaodong Du, Changrui Wang, Wei Tian, Chao Deng, Ke Li, Yifan Ding, Wenhe Liao (2023). Design and Research of Intelligent Assembly and Welding Equipment for Three-Dimensional Circuit. Applied Sciences.DOI
Zhiwei Xiong, Kai Zhang, Tingting Liu, Zhiguang Zhu, Huiliang Wei, Zhiyong Zou, Wenhe Liao (2023). Role of scanning speed on the microstructure and mechanical properties of additively manufactured Al 2 O 3 ‒ZrO 2. Journal of the American Ceramic Society.DOI
Wei Tian, Yifan Ding, Xiaodong Du, Ke Li, Zihang Wang, Changrui Wang, Chao Deng, Wenhe Liao (2023). A Review of Intelligent Assembly Technology of Small Electronic Equipment. Micromachines.DOI
Ronghua Du, Wenhe Liao, Xiang Zhang (2023). Optimal closed-loop robust rendezvous guidance with the observability constraint of angles-only navigation. Transactions of the Institute of Measurement and Control.DOI
Y H Li, Changrui Wang, Xiao-dong DU, Wei TIAN, Tao Zhang, Junshan Hu, Bo Li, Pengcheng Li, Wenhe Liao (2023). Research status and quality improvement of wire arc additive manufacturing of metals. Transactions of Nonferrous Metals Society of China.DOI
Song Dong, Wenhe Liao, Kan Zheng, Feng XUE, Lianjun Sun (2023). Hole surface strengthening mechanism and riveting fatigue life of CFRP/aluminum stacks in robotic rotary ultrasonic drilling. Chinese Journal of Aeronautics.DOI
Zhenwen SUN, Wenhe Liao, Kan Zheng, Song Dong, Pei Lei, Lianjun Sun (2023). Chatter stability of robotic rotary ultrasonic countersinking. Chinese Journal of Aeronautics.DOI
Yiming Mao, Huiliang Wei, Lili Chang, Jiashun Yue, Tingting Liu, Fei Xing, Wenhe Liao (2023). Origin of deposition errors and layer-wise control strategies during laser additive manufacturing. Virtual and Physical Prototyping.DOI
Yuandong Hu, Zhengliang Lu, Keck Voon Ling, Wenhe Liao, Xiang Zhang (2023). Robust multiplexed piecewise affine MPC-based decentralized control of multi-satellite formations using aerodynamic forces. IEEE Transactions on Aerospace and Electronic Systems.DOI
Kai Zhang, Shurui Li, Zhi-Chao Yan, Zhiwei Xiong, Desti Dorion Likoundayenda Bakoutas, Tingting Liu, Wenhe Liao (2022). Microstructure and Phase Evolution of Ti-Al-C-Nb Composites Prepared by In Situ Selective Laser Forming. Materials.DOI
Gang Li, T. Liu, Xing-Zhi Xiao, Mingfei Gu, Wenhe Liao (2022). Numerical simulations of droplet forming, breaking and depositing behaviors in high-viscosity paste jetting. Journal of Manufacturing Processes.DOI
Dan Meng, Hong-Wei Sun, Weiwei Xiong, Lian-Jun Sun, Wenhe Liao, K. Zheng (2022). Investigation on stability of robotic rotary ultrasonic edge milling component with poor rigidity. The International Journal of Advanced Manufacturing Technology.DOI
Kanghui Song, Dawei Li, Tingting Liu, Changdong Zhang, Yi Min Xie, Wenhe Liao (2022). Crystal-twinning inspired lattice metamaterial for high stiffness, strength, and toughness. Materials & Design.DOI
Ming-Hui Pan, Yuchao Li, Si-Yuan Sun, Wenhe Liao, Y. Xing, Wen-Cheng Tang (2022). A Study on Welding Characteristics, Mechanical Properties, and Penetration Depth of T-Joint Thin-Walled Parts for Different TIG Welding Currents: FE Simulation and Experimental Analysis. Metals.DOI
Zhi Qu, Hanyu Deng, Zhi Zhang, Wenhe Liao, Haibo Yang, Chang-Fei Zhuo (2022). Experimental Study on Breakup Characteristics of Gelled Kerosene Droplet in Medium-speed Airstream. Atomization and sprays.DOI
Linghui Shi, Xing-Zhi Xiao, Ting-Ting Liu, Wenhe Liao, Ling-Hui Kong (2022). Design and performance of a flexible broadband metamaterial absorbing structure fabricated based on the direct ink writing 3D printing. Journal of Physics D: Applied Physics.DOI
Z. Ji, Da-Wei Li, Wenhe Liao, Yi-Min Xie (2022). AI-aided design of multiscale lattice metastructures for controllable anisotropy. Materials & Design.DOI
Changrui Wang, Yanpeng Li, W. Tian, Junshan Hu, Bo Li, Pengcheng Li, Wenhe Liao (2022). Influence of ultrasonic impact treatment and working current on microstructure and mechanical properties of 2219 aluminium alloy wire arc additive manufacturing parts. Journal of Materials Research and Technology.DOI
Rui Dai, Dawei Li, Wenhe Liao, Haofan Sun, Yunlong Tang, Qiong Nian (2022). Molecular dynamics simulations to understand the mechanical behavior of functional gradient nano-gyroid structures. Journal of Applied Physics.DOI
Jiahao Sun, Jianping Qiu, Zhenchao Qi, Wenliang Chen, Wei Tian, Wenhe Liao (2022). Effects of hole perpendicularity error on fatigue behaviors of CFRP single-lap single-bolt joints. Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications.DOI
Ronghua Du, Wenhe Liao, Xiang Zhang (2022). Review of Angles-Only Navigation Technique for Spacecraft Autonomous Rendezvous and Docking. Advances in Astronautics Science and Technology.DOI
Yutang Tong, Xingzhi Xiao, Tingting Liu, Nan Wang, Wenhe Liao (2022). Study on the deformation capacity of multi-material 4D-printed LCE actuators. Smart Manufacturing.DOI
Yuandong Hu, Zhengliang Lu, Keck Voon Ling, Wenhe Liao, Xiang Zhang (2022). Multiplexed MPC attitude control of a moving mass satellite using dual-rate piecewise affine model. Aerospace Science and Technology.DOI
Jianlong Zhang, Wenhe Liao, Wei Zhao, Wei Tian, Kan Zheng, Bo Li (2022). Research on stability of robotic longitudinal-torsional ultrasonic milling with variable cutting force coefficient. The International Journal of Advanced Manufacturing Technology.DOI
Haobin Hu, Wenhe Liao, Tingting Liu, Qing An, Liming Hou, Xiang Zhang, Dawei Li (2022). Dual-polarized Frequency-selective Rasorbers with Two Transmission Bands. IEEE International Conference on Electronics Technology (ICET).DOI
Chuangge Wang, Danhe Chen, Wenhe Liao, Zhenhua Liang (2022). Autonomous obstacle avoidance strategies in the mission of large space debris removal using potential function. Advances in Space Research.DOI
Junshan Hu, Xinyue Sun, Wei Tian, Shanyong Xuan, Yanqing Yang, Wang Changrui, Wenhe Liao (2022). A combined hole position error correction method for automated drilling of large-span aerospace assembly structures. Assembly Automation.DOI
Jing Shu, Wenhe Liao, Kan Zheng, Tarek Abd Elbadia (2022). Effect of rotary ultrasonic machining on surface structure and ablation resistance of C/C composite. Ceramics International.DOI
Haining Ma, Xiang Zhang, Zhengliang Lu, Wenhe Liao (2022). An improved central difference Kalman filter for satellite attitude estimation with state mutation. International Journal of Robust and Nonlinear Control.DOI
Cong Wang, Changdong Zhang, Tingting Liu, Wenhe Liao (2021). Cube-Tet transformation method accelerating the process of topology optimization. Engineering Optimization, Vol. 530, No. 11.DOI
Zhihao Li, W. Tian, Min Wang, Bo Li, Wenhe Liao (2021). Positioning error compensation of a flexible track hybrid robot for aircraft assembly based on response surface methodology and experimental study. The International Journal of Advanced Manufacturing Technology.DOI
Jun Li, H. Shao, Ting-Ting Liu, Kai Zhang, Zhi-Chao Yan, Wenhe Liao (2021). Preparation of Ti2AlC through in-situ selective laser forming and reaction sintering.DOI
Fu-qin Liu, Hui-Fen Wei, Lei Wei, Ting-Ting Liu, Wenhe Liao (2021). Transient printing characteristics with wavy build profiles for laser additive manufacturing of small size structures. China Foundry.DOI
Ming Li, Wei Tian, Junshan Hu, Changrui Wang, Wenhe Liao (2021). Effect of hole perpendicularity error and squeeze force on the mechanical behaviors of riveted joints. Microscopy Research and Technique.DOI
Ling Zhang, Wenhe Liao, Tingting Liu, Huiliang Wei, Changchun Zhang (2021). In Situ Elimination of Pores During Laser Powder Bed Fusion of Ti–6.5Al–3.5Mo–l.5Zr–0.3Si Titanium Alloy. Acta Metallurgica Sinica (English Letters).DOI
Zhengliang Lu, Yuandong Hu, Wenhe Liao, Xiang Zhang (2021). Attitude control of the low earth orbit CubeSat using a moving mass actuator. Proceedings of the Institution of Mechanical Engineers Part G Journal of Aerospace Engineering.DOI
Haining Ma, Zhengliang Lu, Xiang Zhang, Wenhe Liao (2021). Robust Strong Tracking Cubature Kalman Filter for Attitude Estimation of Failed Spacecraft. International Conference on Mechanical Engineering and Automation Science (ICMEAS).DOI
Yuandong Hu, Zhengliang Lu, Wenhe Liao, Xiang Zhang (2021). Attitude Control of the Low Earth Orbit Satellite with Moving Masses under Strong Aerodynamic Disturbance. International Conference on Mechanical Engineering and Automation Science (ICMEAS).DOI
Lianjun Sun, Kan Zheng, Wenhe Liao (2021). Chatter suppression and stability analysis of rotary ultrasonic milling titanium alloy thin-walled workpiece. The International Journal of Advanced Manufacturing Technology.DOI
Jing Shu, Wenhe Liao, Kan Zheng, Amro Youssef (2021). Surface morphology on carbon fiber composites by rotary ultrasonic milling. Machining Science and Technology.DOI
Guichuan Li, Etienne Brodu, Jeroen Soete, Huiliang Wei, Tingting Liu, Tao Yang, Wenhe Liao, Kim Vanmeensel (2021). Exploiting the rapid solidification potential of laser powder bed fusion in high strength and crack-free Al-Cu-Mg-Mn-Zr alloys. Additive manufacturing.DOI
Fangxi Ren, Changdong Zhang, Wenhe Liao, Tingting Liu, Dawei Li, Xin Shi, Weiming Jiang, Cong Wang, Junfeng Qi, Yi Chen, Zhen Wang (2021). Transition boundaries and stiffness optimal design for multi-TPMS lattices. Materials & Design.DOI
M.S. Wang, E.W. Liu, Yulei Du, Tianyan Liu, Wenhe Liao (2021). Cracking mechanism and a novel strategy to eliminate cracks in TiAl alloy additively manufactured by selective laser melting. Scripta Materialia.DOI
Haining Ma, Zhengliang Lu, Xiang Zhang, Wenhe Liao (2021). Strong tracking central difference Kalman filter for CubeSat attitude estimation with status mutation. Transactions of the Institute of Measurement and Control.DOI
Xingchuan Liu, Danhe Chen, Kunxu Wu, Wenhe Liao, Xiang Zhang (2021). Research on Three-Impulsive Approach for Satellite Formation Reconfiguration in Near Circular Orbit. International Conference on Mechanical and Aerospace Engineering.DOI
Lianjun Sun, Wenhe Liao, Kan Zheng, Wei Tian, Jinshan Liu, Jindan Feng (2021). Stability analysis of robotic longitudinal-torsional composite ultrasonic milling. Chinese Journal of Aeronautics.DOI
Yang Cao, Huiliang Wei, Tao Yang, Tianyan Liu, Wenhe Liao (2021). Printability assessment with porosity and solidification cracking susceptibilities for a high strength aluminum alloy during laser powder bed fusion. Additive manufacturing.DOI
Song Dong, Dan Meng, Kan Zheng, Wenhe Liao (2021). Experimental study on robotic rotary ultrasonic drilling of CFRP/aluminum stacks. Journal of Physics Conference Series.DOI
Xin Shi, Wenhe Liao, Tingting Liu, Changdong Zhang, Dawei Li, Weiming Jiang, Cong Wang, Fangxi Ren (2021). Design optimization of multimorphology surface-based lattice structures with density gradients. The International Journal of Advanced Manufacturing Technology.DOI
Weimin Jiang, Wenhe Liao, Tingting Liu, Xin Shi, Cong Wang, Junfeng Qi, Yi Chen, Zhen Wang, Changdong Zhang (2021). A voxel-based method of multiscale mechanical property optimization for the design of graded TPMS structures. Materials & Design.DOI
Feng Xue, Kan Zheng, Wenhe Liao, Jing Shu, Miao Didi (2021). Experimental investigation on fatigue property at room temperature of C/SiC composites machined by rotary ultrasonic milling. Journal of the European Ceramic Society.DOI
Weiguang Fang, Yu Guo, Wenhe Liao, Karthik Ramani, Shaohua Huang (2020). Big data driven jobs remaining time prediction in discrete manufacturing system: a deep learning-based approach. International Journal Of Production Research, Vol. 580, No. 9.DOI
张霖，田威，郑法颖，廖文和（2020）. 工业机器人关节闭环反馈精度补偿技术（英文）. Transactions of Nanjing University of Aeronautics and Astronautics.DOI
Jian-Long Zhang, Wenhe Liao, Yin Bu, W. Tian, Junshan Hu (2020). Stiffness properties analysis and enhancement in robotic drilling application. The International Journal of Advanced Manufacturing Technology.DOI
Tao Yang, Tingting Liu, Wenhe Liao, Huiliang Wei, Changdong Zhang, Xiangyuan Chen, Kai Zhang (2020). Effect of processing parameters on overhanging surface roughness during laser powder bed fusion of AlSi10Mg. Journal of Manufacturing Processes.DOI
Huiliang Wei, F.Q. Liu, Lei Wei, Tianyan Liu, Wenhe Liao (2020). Multiscale and multiphysics explorations of the transient deposition processes and additive characteristics during laser 3D printing. Journal of Material Science and Technology.DOI
Chuntao Zhang, Huiliang Wei, Tianyan Liu, Lan Jiang, Tao Yang, Wenhe Liao (2020). Influences of residual stress and micro-deformation on microstructures and mechanical properties for Ti-6.5Al-3.5Mo-1.5Zr-0.3Si alloy produced by laser powder bed fusion. Journal of Material Science and Technology.DOI
Zhengliang Lu, Yuandong Hu, Wenhe Liao, Xiang Zhang (2020). Modeling and attitude control of CubeSat utilizing moving mass actuators. Advances in Space Research.DOI
Feng Xue, Kan Zheng, Wenhe Liao, Jing Shu, Song Dong (2020). Investigation on fiber fracture mechanism of c/sic composites by rotary ultrasonic milling. International Journal of Mechanical Sciences.DOI
Haining Ma, Zhengliang Lu, Xiang Zhang, Wenhe Liao, Klaus Brieß (2020). High-Accuracy and Low-Cost Attitude Measurement Unit of the CubeSat. International Journal of Aerospace Engineering.DOI
Tao Yang, Tingting Liu, Wenhe Liao, Eric W. MacDonald, Huiliang Wei, Changdong Zhang, Xiangyuan Chen, Kai Zhang (2020). Laser powder bed fusion of AlSi10Mg: Influence of energy intensities on spatter and porosity evolution, microstructure and mechanical properties. Journal of Alloys and Compounds.DOI
Yuandong Hu, Zhengliang Lu, Wenhe Liao (2020). Speed-adaptive dynamic surface attitude control for a satellite with moving masses under input constraints. Transactions of the Institute of Measurement and Control.DOI
Xin Shi, Wenhe Liao, Peifeng Li, Changdong Zhang, Tingting Liu, Cong Wang, Jiajing Wu (2020). Comparison of Compression Performance and Energy Absorption of Lattice Structures Fabricated by Selective Laser Melting. Advanced Engineering Materials.DOI
Xiaohua Zhang, Ling Keck Voon, Lim Wee Seng, Chong Kwang Tong, Zhengliang Lu, Xiang Zhang, Wenhe Liao (2020). The MPC Attitude Control with Integration for VELOX-Ⅱ. 《第三十九届中国控制会议论文集（6）》.DOI
Huiliang Wei, Yang Cao, Wenhe Liao, Tianyan Liu (2020). Mechanisms on inter-track void formation and phase transformation during laser Powder Bed Fusion of Ti-6Al-4V. Additive manufacturing.DOI
Huiliang Wei, F.Q. Liu, Wenhe Liao, Tianyan Liu (2020). Prediction of spatiotemporal variations of deposit profiles and inter-track voids during laser directed energy deposition. Additive manufacturing.DOI
Lianjun Sun, Kan Zheng, Wenhe Liao, Jinshan Liu, Jindan Feng, Song Dong (2019). Investigation on chatter stability of robotic rotary ultrasonic milling. Robotics and Computer-Integrated Manufacturing.DOI
Lan Jiang, Tingting Liu, C D Zhang, K Zhang, Tao Yang, Chengxu Zhang, Wenhe Liao (2019). Thermal expansion behavior of CNT reinforced AlSi10Mg composite fabricated via laser powder bed fusion. Materials Research Express.DOI
Song Dong, Wenhe Liao, Kan Zheng, Wenrui Ma (2019). Investigation on thrust force in rotary ultrasonic drilling of CFRP/aluminum stacks. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
Kan Zheng, Song Dong, Wenhe Liao (2019). Investigation on thrust force in rotary ultrasonic drilling of CFRP using Brad drill. Machining Science and Technology.DOI
Zhenhua Liang, Wenhe Liao, Xiang Zhang (2019). Velocity pointing error reduction for symmetric spinning spacecraft via a two-burn scheme. Transactions of the Institute of Measurement and Control.DOI
Xiaoyang Lu, Mussokulov Nursulton, Yulei Du, Wenhe Liao (2019). Structural and Mechanical Characteristics of Cu50Zr43Al7 Bulk Metallic Glass Fabricated by Selective Laser Melting. Materials.DOI
Jingxiao Li, Shun Wang, Yulei Du, Wenhe Liao (2019). Catalytic effect of Ti2C MXene on the dehydrogenation of MgH2. International Journal of Hydrogen Energy.DOI
Zhenhua Liang, Wenhe Liao, Xiang Zhang (2019). Velocity pointing error analysis for symmetric spinning thrusting Cubesat. Advances in Space Research.DOI
Yefu Wang, Wenhe Liao, Kai Yang, Wanqun Chen, T. Liu (2018). Investigation on cutting mechanism of SiCp/Al composites in precision turning. The International Journal of Advanced Manufacturing Technology.DOI
K. Zheng, Wenhe Liao, Qi Dong, Lian-Jun Sun (2018). Friction and wear on titanium alloy surface machined by ultrasonic vibration-assisted milling. Journal of the Brazilian Society of Mechanical Sciences and Engineering.DOI
Song Dong, Wenhe Liao, Kan Zheng, Jinshan Liu, Jindan Feng (2018). Investigation on exit burr in robotic rotary ultrasonic drilling of CFRP/aluminum stacks. International Journal of Mechanical Sciences.DOI
Tao Yang, Tingting Liu, Wenhe Liao, Eric W. MacDonald, Huiliang Wei, Xiangyuan Chen, Liyi Jiang (2018). The influence of process parameters on vertical surface roughness of the AlSi10Mg parts fabricated by selective laser melting. Journal of Materials Processing Technology.DOI
Yi Zheng, Kan Zhang, Tianyan Liu, Wenhe Liao, Chi Zhang, H. Shao (2018). Cracks of alumina ceramics by selective laser melting. Ceramics International.DOI
Lan Jiang, Tianyan Liu, Chi Zhang, Kan Zhang, Mengniu Li, Teng Ma, Wenhe Liao (2018). Preparation and mechanical properties of CNTs-AlSi10Mg composite fabricated via selective laser melting. Materials Science and Engineering A.DOI
Song Dong, Kan Zheng, Wenhe Liao (2018). Stability of lateral vibration in robotic rotary ultrasonic drilling. International Journal of Mechanical Sciences.DOI
Zhihua Li, Kan Zheng, Wenhe Liao, Xingzhi Xiao (2018). Surface characterization of zirconia ceramics in ultrasonic vibration-assisted grinding. Journal of the Brazilian Society of Mechanical Sciences and Engineering.DOI
Xiaoyang Lu, Maosong Wang, Yulei Du, Wenhe Liao (2018). Anisotropy in a bulk metallic glass induced by uni-directional heat flow. Journal of Non-Crystalline Solids.DOI
Kai Zhang, Tingting Liu, Wenhe Liao, Changdong Zhang, Yishuai Yan, Daozhong Du (2018). Influence of laser parameters on the surface morphology of slurry-based Al2O3 parts produced through selective laser melting. Rapid Prototyping Journal.DOI
Tao Yang, Tingting Liu, Wenhe Liao, Changdong Zhang, Shengqin Duan, Xiangyuan Chen (2018). Study on Deformation Behavior of Ti6Al4V Parts Fabricated by Selective Laser Melting. MATEC Web of Conferences.DOI
Zhihua Li, Kan Zheng, Wenhe Liao, Xingzhi Xiao (2017). Tribological properties of surface topography in ultrasonic vibration-assisted grinding of zirconia ceramics. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
Kai Zhang, Tingting Liu, Wenhe Liao, Changdong Zhang, Daozhong Du, Yi Zheng (2017). Photodiode data collection and processing of molten pool of alumina parts produced through selective laser melting. Optik.DOI
Li Shi, Changdong Zhang, Tingting Liu, Wenhe Liao, Xiuyi Jia (2017). Adaptive Density Optimization of Lattice Structures Sustaining the External Multi-load. Lecture notes in computer science.DOI
Xingzhi Xiao, Kan Zheng, Wenhe Liao, Heng Meng (2016). Study on cutting force model in ultrasonic vibration assisted side grinding of zirconia ceramics. International Journal of Machine Tools and Manufacture.DOI
Wen-An Yang, Guo Yu, WenHe Liao (2015). A Hybrid Learning-Based Model for Simultaneous Monitoring of Process Mean and Variance. Quality And Reliability Engineering International, Vol. 310, No. 30.DOI
Chao Zeng, Wenhe Liao, Wei Tian (2015). Influence of initial fit tolerance and squeeze force on the residual stress in a riveted lap joint. The International Journal of Advanced Manufacturing Technology.DOI
Xingzhi Xiao, Kan Zheng, Wenhe Liao (2014). Theoretical model for cutting force in rotary ultrasonic milling of dental zirconia ceramics. The International Journal of Advanced Manufacturing Technology.DOI
Chao Zeng, Wei Tian, Wenhe Liao, Liang Hua (2013). Study of laser cladding thermal damage: A quantified microhardness method. Surface and Coatings Technology.DOI
Chao Zeng, Wei Tian, Wenhe Liao, Liang Hua (2013). Study of Thermal Damage Introduced by Laser Cladding Process Part 1. Existence Verification by Experiment.DOI
Wei Tian, Chao Zeng, Wenhe Liao, Liang Hua (2013). Study of Thermal Damage Introduced by Laser Cladding Process Part 2. A Generalized Description.DOI
Wen-an Yang, Yu Guo, Wenhe Liao (2012). Economic and statistical design of (X)over-bar and S control charts using an improved multi-objective particle swarm optimisation algorithm. International Journal Of Production Research, Vol. 500, No. 1.DOI
Yingguang Li, Yong Lu, Wenhe Liao, Zongkai Lin (2006). Representation and share of part feature information in web-based parts library. Expert Systems With Applications, Vol. 31, No. 4.DOI