刘含莲｜山东大学｜学者主页

2026

袁玉兰，刘含莲，黄传真，刘洋，王利梅，季良刚

《粉末冶金材料科学与工程》

2023

李吉遵，高洪玉，刘含莲，黄传真，王利梅，袁玉兰

《工具技术》

2022

A new characterization method for stress, hardness, microstructure and shear streamline using the stored energy field in deformation zone of workpiece

Zheng Tang, Chuanzhen Huang, Zhenyu Shi, Bing-Hao Li, Han-Lian Liu, Jiahui Niu, Zhen Chen, Guo-shuai Jiang

International journal of machine tools & manufacture

DOI

2022

Combined effects of heat treatment and TiB2 content on the high-temperature tensile performance of TiB2-modified Ni-based GH3230 alloy processed by laser powder bed fusion

Zhen-Hua Zhang, Quan-Quan Han, Zhong-Yi Liu, Jian Gao, Li-Qiao Wang, Han-Lian Liu, Rui Wang, Teng-Kun Ma, Zheng Gao

Materials Science & Engineering: A

DOI

2022

DOI

2021

Three-dimensional transient cutting tool temperature field model based on periodic heat transfer for high-speed milling of compacted graphite iron

Li-Mei Wang, Han-Lian Liu, Chuanzhen Huang, Jiahui Niu, Xue-Fei Liu, Peng Yao

Journal of Cleaner Production

DOI

2021

Tribological characterization of an alumina-based composite in dry sliding contact against laser-heated and unheated Inconel 718

Bin Zhao, I. Khader, Han-Lian Liu, Tianfeng Zhou, G. Konrath, A. Kailer

DOI

2021

Y. Fei, ChuanzhenHuang, Han-Lian Liu, Tian'en Yang, Ji-Kang Xu

2021

Experimental Study on High-Speed Milling of SiCf/SiC Composites with PCD and CVD Diamond Tools

Bin Zhang, Ya-Nan Du, Han-Lian Liu, Lianjia Xin, Yin-Fei Yang, Liang Li

Materials

DOI

2021

Laser-induced oxidation-assisted micromilling of deep narrow microgroove on Inconel 718

Lianjia Xin, Bin Zhang, Guo-Long Zhao, Han-Lian Liu, Yin-Fei Yang, Liang Li

The International Journal of Advanced Manufacturing Technology

DOI

2021

Mechanical properties and microstructure of spark plasma sintered Al2O3-SiCw-Si3N4 composite ceramic tool materials

Zheng Zhang, Yue Liu, Han-Lian Liu

Ceramics International

DOI

2020

C. Abbas, Chuanzhen Huang, Jun Wang, Zhen Wang, Han-Lian Liu, Hong-Tao Zhu

DOI

2020

Wear patterns and mechanisms of sialon ceramic end-milling tool during high speed machining of nickel-based superalloy

Yishang Li, B. Zou, Zhen-Yu Shi, Chuanzhen Huang, Lei Li, Han-Lian Liu, Hong-Tao Zhu, Peng Yao, Ji-Kai Liu

DOI

2020

An improved case based reasoning method and its application in estimation of surface quality toward intelligent machining

Long-Hua Xu, Chuanzhen Huang, Chengwu Li, Jun Wang, Han-Lian Liu, Xiaodan Wang

Journal of Intelligent Manufacturing

DOI

2020

Preparation and Application of a Novel Water-Based Viscoelastic Polishing Fluid for Abrasive Flow Machining

Zhen-Zhong Zhang, Xianpeng Zhang, Xiao Liu, Pengcheng Zhou, Peng Yao, Chuanzhen Huang, Han-Lian Liu, Hong-Tao Zhu, B. Zou

DOI

2019

超声振动辅助铣磨加工工艺对Cf/SiC复合材料加工表面质量的影响

湛青坡，刘含莲，黄传真，朱洪涛，刘伟昊，袭建人

《工具技术》

2019

Al2O3-SiCw-SiCnp复合陶瓷刀具材料粉体的分散混合工艺研究

刘雪飞，刘含莲，黄传真，王利梅，姚鹏，刘璐

《工具技术》

2019

费玉环，黄传真，刘含莲，邹斌

《工具技术》

2018

Changes of cutting performance under different workpiece removal volume during normal speed and high speed milling of compacted graphite iron

R. Su, Chuanzhen Huang, Long-Hua Xu, B. Zou, Han-Lian Liu, Yue Liu, Chengwu Li

The International Journal of Advanced Manufacturing Technology

DOI

2018

Sintering mechanisms of Al 2 O 3 -based composite ceramic tools having 25% Si 3 N 4 additions

Xiao-Bo Bai, Chuanzhen Huang, Jun Wang, B. Zou, Han-Lian Liu

International Journal of Refractory Metals and Hard Materials

DOI

2018

Bin Zhao, Han-Lian Liu, Chuanzhen Huang, Jun Wang, M. Cheng, Q. Zhan

DOI

2018

A helical interpolation precision truing and error compensation for arc-shaped diamond grinding wheel

Jia-Hao Zhu, Peng Yao, Wei Wang, Chuanzhen Huang, Hong-Tao Zhu, B. Zou, Han-Lian Liu

The International Journal of Advanced Manufacturing Technology

DOI

2018

DOI

2016

Synergistically toughening effect of SiC whiskers and nanoparticles in Al2O3-based composite ceramic cutting tool material

Xue-Fei Liu, Han-Lian Liu, Chuanzhen Huang, Li-Mei Wang, B. Zou, Bin Zhao

Xue-Fei Liu, Han-Lian Liu, Chuanzhen Huang, Li-Mei Wang, Bin Zou, Bin Zhao

2016

Reliability of Al2O3/TiC Micro-Nano-Composite Ceramic Tool in the Machining of Stainless Steel

Zeng-Bin Yin, Chuang Huang, Jun-Tang Yuan, B. Zou, Han-Lian Liu, Hong-Tao Zhu

DOI

2016

Microstructural development and mechanical properties of reactive hot pressed nickel-aided TiB2-SiC ceramics

Guo-Long Zhao, Chuanzhen Huang, N. He, Han-Lian Liu, B. Zou

DOI

2015

DOI

2013

Cutting performance and failure mechanisms of TiB2-based ceramic cutting tools in machining hardened Cr12MoV mold steel

Song Hao, Chuang Huang, B. Zou, Jun Wang, Han-Lian Liu, Hong-Tao Zhu

DOI

2012

Han-Lian Liu, Zhan-Qiang Liu, Xu Chong, Liang Xu, Hong-Tao Zhu, Guo-Long Zhao, B. Zou, Chuanzhen Huang

2011

CUTTING PERFORMANCE AND WEAR MECHANISM OF Si3N4-BASED NANOCOMPOSITE CERAMIC CUTTING TOOL IN MACHINING OF CAST IRON

B. Zou, Chuanzhen Huang, Jin-Peng Song, Han-Lian Liu, Hong-Tao Zhu

DOI

2011

Study on Wear Performance of Whisker-Toughening Ceramic Cutting Tools Synthesized by the Carbothermal Reduction Process

Xu Chong, Chuang Huang, Liang Xu, Guo-Long Zhao, B. Zou, Han-Lian Liu

DOI

2011

Microstructure Simulation and Toughening Mechanism of Ceramic Tool Material

Xiao-Hui Zhu, Chuang Huang, Han-Lian Liu, B. Zou, Hong-Tao Zhu

DOI

2011

New Thought for Designing the Multi-Phase and Multi-Scale Nanocomposite Ceramic Tool Materials

Han-Lian Liu, Chuang Huang, X. Teng, H. Wang

DOI

2007

Chuang Huang, M. Li, Sui Wang, Jing Sun, Han-Lian Liu, X. Ai

DOI

Inverted pyramid structure on monocrystalline silicon processed by wet etching after femtosecond laser machining in air and deionized water

Qing-Wei Wang, Peng Yao, Yueming Li, Long Jiang, Ji-Miao Xu, Shi-Tong Liang, Dong-kai Chu, Wanying He, Chuanzhen Huang, Hong-Tao Zhu, Han-Lian Liu

Optics & Laser Technology

DOI

精选作品

期刊论文

SPS烧结添加导电增强相的Si3N4基复合陶瓷刀具材料的电热行为仿真与试验研究

Modeling the brittle-ductile transition depth of near crack-free processing in hybrid laser-liquidjet-milling of SiC

Coupled prediction of flexural strength and thermal expansion coefficient of Si3N4/cordierite ceramic composites

A kind of ZrB2-based ceramic cutting tool integrating temperature measurement function by thermoelectric effect

Balancing rheology and stability in high-solid-loading bimodal alumina photocurable slurries by particle-size-selective dispersant modification

Material removal mechanisms in picosecond laser ablation of monocrystalline silicon investigated by electron-density-dependent two-temperature model coupled with molecular dynamics simulation

Rheology, Stability, and Photosensitivity of SiC Slurry by Triblock Copolymer Dispersant and Particle Size Grading

Enhancing the solid phase content and mechanical properties of SiC ceramics via stereolithography apparatus using silane-modified alumina coatings

A coupled multiple-sphere T-matrix and Monte Carlo ray-tracing approach for curing-geometry prediction and contour compensation in high-solid-loading ceramic vat photopolymerization

Characterization of micro-laminated ceramic cutting tool materials with thermal barrier function: interface, thermal shock resistance and thermal barrier performance

Study on high-temperature mechanical properties, thermal shock resistance and thermal fatigue resistance of Ti(C,N)-based cermet tool materials

A Ti(C,N)-(W,Ti)C-MoC/Ti(C,N)-(W,Ti)C-Al2O3n/PZT laminated ceramic cutting tool integrating force measurement function with piezoelectric effect

Drill wear and its effect on surface integrity in BTA deep hole drilling of heterogeneous materials

Interface performance of ZrB₂-based temperature-measuring ceramic cutting tool material: From Interface bonding strength, friction and wear to temperature measurement capability

Vat Photopolymerization Additive Manufacturing for Advanced Ceramics: Techniques, Multimaterial Strategies, and Applications

Modelling residual compressive stress distribution induced by abrasive waterjet polishing

烧结温度对热压烧结TiCN基金属陶瓷刀具材料力学性能和微观组织的影响

氮化硅基陶瓷刀具强韧化方法及其切削高温合金研究现状

Performance improvement of Si3N4/BN slurry and porous ceramics caused by the synergistic effect of BN surface functionalization and high light transmission of SiO2

Fabrication of nanocomposite gradient thermal barrier ceramic cutting tools: modeling, design, and characterization of mechanical-thermal barrier performance

Microstructural evolution and mechanical properties of Ti2AlC-reinforced Al2O3/Sialon ceramic composites

Simulation optimization design and performance verification of a new abrasive waterjet deflection nozzle for machining internal cavity structure

Analysis of chip formation and load distribution during deep hole drilling by applying micro irreversible entropic thermodynamics and an improved friction model considering boundary lubrication conditions

Study on crack-healing performance of Ti(C,N)-(W,Ti)C-TiSi2 gradient cermet tool materials

Structural evolution of TiAlSiN gradient coating under N2 pressure control and its influence mechanism on mechanical properties and adhesion strength

Improvement of viscosity and stability of high-solid-loading ceramic slurry by the integrated technology of plasma hydroxylation and solid particle gradation

A predictive method of the critical cutting depth for ductile–brittle transition in laser-assisted machining of 4H-SiC

Effects of the stored energy inside the deformation zones of metal workpieces on the machining and service processes of machined parts: a review

Fabrication and characterization of Ti(C,N)-based micro-laminated ceramic tool with thermal barrier function by two-step hot-pressing sintering process

Effect of TiB 2 on properties and microstructure of Si 3 N 4 ‐TiB 2 ceramics sintered at lower temperature

Wet etching after femtosecond laser machining for efficient fabrication of consistent inverted pyramid microstructures on monocrystalline silicon surfaces

A laminated Si3N4/SiCN ceramic cutting tool integrating force measurement function with piezoresistive effect

Silicon nitride based low thermal expansion ceramic tool materials and their performance

Microstructure, mechanical properties and friction performance of SiC whisker and SiC particle synergistic toughening ZrB₂-based ceramic material for potential cutting tool

Change of the machined hole wall surface roughness, microstructure and microhardness of low alloy steel caused by drill-guide-pads during BTA deep hole drilling

The evolution mechanism of femtosecond laser-induced periodic structure on monocrystalline silicon with scanning rate and the associated material rearrangement process

Fracture Toughness Modeling and Toughening Mechanisms Taking Into Account Grain Growth and Crack Deflections of Bionic Ceramic Cutting Tool Materials

Enhanced properties of binderless titanium carbonitride based ceramic nanocomposites: An integrated study of microstructure, performance, and mechanisms

A Si 3 N 4 –TiB 2 /SiCN–B 4 C laminated ceramic tool integrating force measurement function with piezoresistive effect

Surface integrity improvement of the 316L stainless steel manufactured by selective laser melting using a pre-mixed abrasive water jet method

Effect of initial particle size distribution of hard phase and sintering temperature on microstructure, mechanical properties and corrosive resistance for Ti(C,N)-based composites

Laser-Based Two-Step Fabrication Method of Near-Damage-Free Controllably Superhydrophobic Antireflection Micronano Structures of Monocrystalline Silicon

Wear mechanisms and crack-healing mechanisms of Ti(C,N)-(W,Ti)C-TiSi2 gradient cermet tool in dry turning of 17-4PH stainless steel

A design method based on thermal barrier performance evaluation coefficients of micro-laminated ceramic cutting tool materials for clean dry machining

FEM and experimental research on residual stress, crack propagation and toughening mechanisms of novel bionic ceramic cutting tools

蠕墨铸铁钻削加工有限元分析及刀具结构优选研究

铸件厚度及退火处理对蠕墨铸铁切削加工性能的影响

贝壳仿生陶瓷刀具材料制备与力学性能研究

基于有限元分析的壳体平面铣削加工质量改善

RuT450蠕墨铸铁铣削加工刀具角度和铣削参数的仿真优化与实验研究

铸件厚度与热处理对RuT450蠕墨铸铁微观组织与力学性能的影响

Some new findings on formation mechanisms of the machined surface geometric quality of compacted graphite iron

The effect of ZrO2 particle size and solid loading on the rheological properties of highly thixotropic ZrO2 ceramic slurries applied in photopolymerization 3D printing

Toughening mechanisms taking into account growth kinetics of SiC whiskers for bionic ceramic cutting tool materials

Optimization of picosecond laser machining parameters for monocrystalline silicon based on Box-Behnken Design

Effect of TiAlSiN gradient structure design on mechanical properties and microstructure of coatings

Laser powder bed fusion of high-strength crack-free Al7075 alloy with the in-situ formation of TiB2/Al3Ti-reinforced phases and nucleation agents

Dynamic analysis on drilling of aluminum matrix composite of silicon carbide with cryogenically treated tools

A modified Johnson-Cook constitutive model of Inconel 690 weld overlay taking into account the strain rate softening effect

A Study on Microstructure Evolution and Mechanical Properties of Inconel 690 Subjected to Milling Process

A new type of high thermal shock resistance tool for inhibiting thermal crack

Effect of arc deposition process on mechanical properties and microstructure of TiAlSiN gradient coatings

Surface integrity and modification of SA508Gr.3Cl.2 RPV steel induced by high-speed face milling process

Effect of Al and Si content on properties of Ti(1-x-y)AlxSiyN coating materials: First-principles calculation

Modeling and optimizing of laser-assisted waterjet process parameters for near-damage-free micromachining of monocrystalline silicon

Fabrication, microstructure, and mechanical properties of novel three‐layer structured bionic ceramic cutting tools

A chip formation mechanism taking into account microstructure evolution during the cutting process: Taking compacted graphite iron machining as an example

A new type of high flexural strength micro-nano-composite ceramic tool material Ti(C,N)/WC/ZrO2 for integrated micro milling cutter

The design and cutting performance of variable pitch solid ceramic end milling tools

Cr3C2含量对热压烧结WC基硬质合金材料微观组织和力学性能的影响

高熵碳氮化物陶瓷的研究现状及应用展望

The crack-healing and strength recovery mechanisms for the new developed Ti(C,N)-TiSi2-WC composite ceramic tool materials with crack-healing ability

Modeling energy consumption inside cutting deformation zone to predict the stress distributions, temperature and microstructure by micro irreversible entropic thermodynamics

Design and fabrication of new oblique gradient cemented carbide tool material for inhibiting the initiation of thermal crack

A methodology to predict thermal crack initiation region of tool for high-speed milling compacted graphite iron based on three-dimensional transient thermal stress field model

Novel intelligent reasoning system for tool wear prediction and parameter optimization in intelligent milling

Modeling and optimizing femtosecond laser process parameters for high-efficient and near damage-free micromachining of single-crystal GaN substrate

Effect of drilling parameters on the hole surface integrity of low alloy steel for nuclear power during BTA deep hole drilling