孙虎｜厦门大学嘉庚学院｜学者主页

2026

基于声发射技术的工业胶管隐性损伤在线监测技术研究

王伟，孙虎

《自动化应用》

DOI

2026

铁磁性套管脉冲涡流检测快速理论模型研究

孙虎，司昊辰，彭粲粲

《仪器仪表学报》

2026

人工智能驱动的复合材料结构超声导波损伤监测技术

邵薇涵，黄媛，廖运来，王镱涵，孙虎，卿新林

《力学学报》

2026

基于脉冲涡流检测的铁磁性金属套管缺陷图像处理方法（英文）

邓勇，宋地霖，孙虎

Journal of Measurement Science and Instrumentation

2026

Remote Field Eddy Current Monitoring of Hole-Edge Cracks in Bolted Joints: Theoretical Modeling and Experimental Validation

Jun Hou, Hu Sun, Xinlin Qing

NDT & E International

DOI

2026

Lamb wave-based cross-domain damage identification for CFRP composite structures using a modular deep learning framework

Gang Chen, Weihan Shao, Donglin Zhu, Qi-Jian Liu, Zhi-Quan Liu, Hu Sun

Mechanical systems and signal processing

DOI

2026

Few-shot cross-domain corrosion damage localization based on ultrasonic guided waves and metalocator

Yun-Zhi Lin, Zishi Shen, Wenqi Hu, Xueliang Hu, Zefeng Chen, Xian-Min Chen, Gang Chen, Hu Sun

Measurement science and technology

DOI

2026

A Cross-Domain Corrosion Identification Algorithm of Aircraft Structures Based on Domain Adaptation Regression

Xiao Guo, Zishi Shen, Xian-Min Chen, Xinkun Zhou, Gang Chen, Hu Sun

IEEE Sensors Journal

DOI

2026

A physics-informed dual-stream convolutional neural network method for in-situ continuous bolt preload monitoring and detection

Luo Wang, Hu Sun, Shiyu Huo, Xiaolin Yang, Ying-Wu-Di Li, Paweł H. Malinowski, Fang Deng, Hailing Fu

Mechanical systems and signal processing

DOI

2026

Eddy current Sensing-Enabled smart composite Bolts: Fabrication and Self-Diagnosis capabilities for Hole-Edge damage monitoring

Hu Sun, Shu-Han Liu, Shengbao Bai, Yiming Zhang, Jun Hou, Xinlin Qing

Measurement

DOI

2026

A Generalized Zero-Shot Regression Framework for Cross-Domain Damage Identification in Composite Structures

Gang Chen, Weihan Shao, Qi-Jian Liu, Hu Sun, Shiyu Huo, Hailing Fu, Xinlin Qing

IEEE Transactions on Industrial Informatics

DOI

2026

Anisotropy-compensated wavefield imaging: precise delamination mapping in composites via wavenumber-angle-depth analysis

Zhangchi Gao, Kan Feng, Hu Sun, Xinlin Qing

Composite structures

DOI

2025

电磁脉冲涡流检测下金属管道缺陷检测研究

杨超，孙虎，唐超

《电子测量与仪器学报》

DOI

2025

螺栓连接结构孔边损伤定量化监测技术研究进展

孙虎，肖达，侯俊

《航空科学技术》

DOI

2025

Multilayer Cooperative Particle Swarm Optimizer for Feature Selection in Structural Health Monitoring

Gang Chen, Tian-Yi Shang, Wen-Rui Song, Weihan Shao, Hu Sun, Xin-Lin Qing

IEEE Sensors Journal

DOI

2025

Asymmetric multi-task deep learning with location attention for structural damage detection

Tianyuan Li, Chenhui Jiang, Qifeng Zhou, Zhengyu Ma, Hu Sun

Structural Health Monitoring

DOI

2025

An interpretable evolutionary broad learning system for damage identification in aircraft structures using Lamb waves

Gang Chen, Weihan Shao, Fu Tang, Hu Sun

Applied Soft Computing

DOI

2025

A Supervised Scene Adaptive Model for Identifying Impact Load with Few Samples

Shengbao Bai, Ji Yao, Chenhui Huang, Yuan Tian, Zhigang Xiong, Gang Chen, Hu Sun

Italian National Conference on Sensors

DOI

2025

Damage Presence, Localization, and Quantification of Aircraft Structure Based on End-to-End Deep Learning Framework

Gang Chen, Wen-Rui Song, Weihan Shao, Hu Sun, Xin-Lin Qing

IEEE Transactions on Instrumentation and Measurement

DOI

2025

Monitoring of Mixed Failure Mode in CFRP Bolted Joint Structures Based on a Modular Piezoresistive Sensing Network

Haoxuan Qin, Yuanyuan Yang, Maozhi Sun, Junfeng Zhu, Shi-Chen Liu, Hu Sun, Yishou Wang, Xinlin Qing, Qi-Jian Liu

Polymer Composites

DOI

2024

厦门大学重大装备健康管理技术研究团队 2023年度研究工作进展

曾志伟，孙虎，王奕首，方正，李卫彬，周绮凤，颜佳佳，卿新林

《无损检测》

2024

Damage Quantification Method for Aircraft Structures Based on Multitask CNN-LSTM and Transfer Learning

Weihan Shao, Hu Sun, Yishou Wang, X. Qing

IEEE Sensors Journal

DOI

2024

An intelligent CFRP bolt with embedded carbon nanotube eddy current sensors for damage self‐diagnosis of bolted composite joints

Jun Hou, Shengbao Bai, Xinlong Zhang, Hu Sun, Xin-Lin Qing

Polymer Composites

DOI

2023

A hybrid FCN-BiGRU with transfer learning for low-velocity impact identification on aircraft structure

Chenhui Huang, Wei-Zhen Liao, Hu Sun, Yishou Wang, X. Qing

Smart materials and structures (Print)

DOI

2023

A novel Lamb wave-based multi-damage dataset construction and quantification algorithm under the framework of multi-task deep learning

Weihan Shao, Hu Sun, Qifeng Zhou, Yishou Wang, X. Qing

Structural Health Monitoring

DOI

2023

A novel damage index integrating piezoelectric impedance and ultrasonic guided wave for damage monitoring of bolted joints

Wei-Zhen Liao, Hu Sun, Yishou Wang, X. Qing

Structural Health Monitoring

DOI

2023

An Improved Probabilistic Diagnosis Imaging Algorithm for Quantifying Hole-edge Crack Growth

Hu Sun, Jun Hou, Wei Chen, Yishou Wang, X. Qing

Measurement

DOI

2023

Corrosion quantification of plate-type structures using Lamb wavefield and monogenic signal processing.

Hu Sun, Weihan Shao, Jiannan Song, Xiaofeng Yang, Yishou Wang, X. Qing

Ultrasonics

DOI

2022

基于脉冲涡流的套管缺陷检测方法研究

孙虎

《电子科技大学》

2022

基于附加质量的单点模态振型参数损伤识别研究

孙虎，狄生奎，杜祝遥，王立宪，项长生

《中外公路》

2022

基于改进经验傅里叶分解技术的结构模态参数及损伤识别研究

孙虎

《兰州理工大学》

2022

Adhesively bonding a reusable PZT transducer for structural health monitoring (SHM) with an ethylene-acrylic acid copolymer adhesive

Qi-Jian Liu, Yuan Chai, Yishou Wang, Hu Sun, X. Qing

International Journal of Adhesion and Adhesives

DOI

2022

Lamb wavefield-based monogenic signal processing for quantifying delamination in composite laminates

Hu Sun, Weihan Shao, Jiannan Song, Xiaofeng Yang, Yishou Wang, X. Qing

Smart materials and structures (Print)

DOI

2022

An island-bridge packaging piezoelectric sensor for structural health monitoring in high-strain environments

Wei-Zhen Liao, Hu Sun, Yishou Wang, X. Qing

Journal of Intelligent Materials Systems and Structures

DOI

2022

A Novel Pentagonal EC Sensing Array Film for Quantifying Hole-Edge Crack of Bolted Joints

Hu Sun, Jun Hou, Wei Chen, Xiaofeng Yang, Yishou Wang, X. Qing

IEEE Sensors Journal

DOI

2022

Identification and imaging of multi-defects on a complicated composite structure by ultrasonic guided wave

Hashen Jin, Yishou Wang, Hu Sun, Wei-Bin Li, X. Qing

Polymer testing

DOI

2022

A multi-level damage classification technique of aircraft plate structures using Lamb wave-based deep transfer learning network

Weihan Shao, Hu Sun, Yishou Wang, X. Qing

Smart materials and structures (Print)

DOI

2021

Transient eddy current response to pulsed eddy current testing inside a ferromagnetic casing

Hu Sun, Yibing Shi, Wei Zhang, Yanjun Li

NDT & E international

DOI

2021

Prognosis of fatigue cracks in an aircraft wing using an adaptive tunable network and guided wave based structural health monitoring

Xian-Ping Zeng, Xiao Liu, Hu Sun, X. Qing

DOI

2021

Domain Adaptation in Intelligent Ultrasonic Logging Tool: From Microseismic to Pulse-Echo

Xu-Yang Gao, Yibing Shi, Qi Zhu, Zhi-Peng Li, Hu Sun, Zhenqiu Yao, Wei Zhang

IEEE Transactions on Instrumentation and Measurement

DOI

2021

RFEC Based Oil Downhole Metal Pipe Thickness Measurement

Hu Sun, Yibing Shi, Wei Zhang, Yanjun Li

Journal of nondestructive evaluation

DOI

2021

A Local TR-MUSIC Algorithm for Damage Imaging of Aircraft Structures

Shilei Fan, Aijia Zhang, Hu Sun, Feng-Ling Yun

Italian National Conference on Sensors

DOI

2021

Quantifying Hole-Edge Crack of Bolt Joints by Using an Embedding Triangle Eddy Current Sensing Film

Shilei Fan, Junyan Yi, Hu Sun, Feng-Ling Yun

Italian National Conference on Sensors

DOI

2021

A Study on Ferromagnetic Casing Wall Thinning Evaluation Based on Pulsed Eddy Current Testing

Hu Sun, Yibing Shi, Wei Zhang, Yanjun Li, Cheng Yu, Mao-Yang Li, Xiaojun Li

IEEE Transactions on Instrumentation and Measurement

DOI

2021

Application of multisynchrosqueezing transform for structural modal parameter identification

Hu Sun, Sheng-Kui Di, Zhuyao Du, Lixian Wang, C. Xiang

Journal of Civil Structural Health Monitoring

DOI

2021

A new interleaving eddy current array-based sensing film for fatigue crack quantification of bolted joints

Hu Sun, Junyan Yi, Tao Wang, Yishou Wang, X. Qing

Journal of Intelligent Materials Systems and Structures

DOI

2020

铁磁性套管脉冲涡流检测的时域解析解

孙虎，师奕兵，张伟，李焱骏

《仪器仪表学报》

DOI

2020

On-site monitoring of bearing failure in composite bolted joints using built-in eddy current sensing film

Qi-Jian Liu, Hu Sun, Yuan Chai, Jian-Jian Zhu, Tao Wang, X. Qing

Journal of composite materials

DOI

2020

Hidden corrosion detection using laser ultrasonic guided waves with multi-frequency local wavenumber estimation.

Tianfang Gao, Hu Sun, Yong-Qiang Hong, X. Qing

Ultrasonics

DOI

2020

Time-domain modeling analysis of pulsed eddy current testing on ferromagnetic casing.

Hu Sun, Yibing Shi, Wei Zhang

Review of Scientific Instruments

DOI

2020

An Eddy Current-Based Structural Health Monitoring Technique for Tracking Bolt Cracking

Hu Sun, Tao Wang, Dawei Lin, Yishou Wang, X. Qing

Italian National Conference on Sensors

DOI

2020

An Improved Matching Pursuit-Based Temperature and Load Compensation Method for Ultrasonic Guided Wave Signals

Yishou Wang, Geng Wang, Diheng Wu, Yue Wang, Bingrong Miao, Hu Sun, X. Qing

IEEE Access

DOI

2019

一种铁磁管道中远场涡流的伪峰移除方法

孙虎，师奕兵，张伟，李焱骏

《仪器仪表学报》

DOI

2019

On-Site Health Monitoring of Composite Bolted Joint Using Built-In Distributed Eddy Current Sensor Network

Qi-Jian Liu, Hu Sun, Tao Wang, X. Qing

Materials

DOI

2019

Failure Monitoring of Bolted Joints by Using Eddy Current Array Sensing Film

Hu Sun, Tao Wang, Qi-Jian Liu, Yishou Wang, X. Qing

DOI

2019

Identification and Compensation Technique of Non-Uniform Temperature Field for Lamb Wave-and Multiple Sensors-Based Damage Detection

Hu Sun, Junyan Yi, Yu Xu, Yishou Wang, X. Qing

Italian National Conference on Sensors

DOI

2019

Propagation characteristics of ultrasonic weld-guided waves in Friction stir welding joint of same material.

Yishou Wang, Tianfang Gao, De-Bo Liu, Hu Sun, Bingrong Miao, X. Qing

Ultrasonics

DOI

2019

A Reference Matching-Based Temperature Compensation Method for Ultrasonic Guided Wave Signals

Geng Wang, Yu-Hang Wang, Hu Sun, Bingrong Miao, Yishou Wang

Italian National Conference on Sensors

DOI

2019

Piezoelectric Transducer-Based Structural Health Monitoring for Aircraft Applications

X. Qing, Wen-Zhuo Li, Yishou Wang, Hu Sun

Italian National Conference on Sensors

DOI

2019

Study on Damage Detection Resolution Based on Lamb Wave and TR-MUSIC Algorithm

Aijia Zhang, Hu Sun, Yishou Wang, X. Qing

2019

Secondary Peak Separation of Remote Field Eddy Current Testing in Ferromagnetic Pipes

Hu Sun, Yibing Shi, Xu-Yang Gao, Wei Zhang

International Instrumentation and Measurement Technology Conference

DOI

2019

Fatigue Crack Identification in Weld Zone of Bogie Using Guided Wave

Jiajia Yan, Guipeng Chen, Hu Sun, X. Qing

DOI

2019

Baseline-free damage imaging for metal and composite plate-type structures based on similar paths

Hu Sun, Aijia Zhang, Yishou Wang, X. Qing

Int. J. Distributed Sens. Networks

DOI

2019

A two-dimensional eddy current array–based sensing film for estimating failure modes and tracking damage growth of bolted joints

Hu Sun, Tao Wang, Qi-Jian Liu, Yishou Wang, X. Qing

Structural Health Monitoring

DOI

2019

Active Monitoring of Fatigue Crack in the Weld Zone of Bogie Frames Using Ultrasonic Guided Waves

Jiajia Yan, Hashen Jin, Hu Sun, X. Qing

Italian National Conference on Sensors

DOI

2019

Crack Monitoring for Hot-Spot Areas Under Time-Varying Load Condition Based on FCM Clustering Algorithm

Hu Sun, Junyan Yi, Yu Xu, Yishou Wang, X. Qing

IEEE Access

DOI

2018

Quantitative monitoring of hole-edge damage growth using eddy current array sensor-based intelligent bolt

Hu Sun, Jian-Bo Shao, Yishou Wang, X. Qing

Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring

DOI

2018

High Strain Survivability of Piezoceramics by Optimal Bonding Adhesive Design

Hu Sun, Yishou Wang, X. Qing, Zhan-Jun Wu

Italian National Conference on Sensors

DOI

2018

A novel eddy current array sensing film for quantitatively monitoring hole-edge crack growth in bolted joints

Hu Sun, Tao Wang, Qi-Jian Liu, X. Qing

Smart materials and structures (Print)

DOI

2017

Random demodulation for structural health monitoring excited by the five-cycle sine burst

Xing Li, Dong Liang, Yishou Wang, X. Qing, Hu Sun

DOI

2017

Numerical modeling of the load effect on PZT-induced guided wave for load compensation of damage detection

Hu Sun, Aijia Zhang, Yishou Wang, X. Qing

Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring

DOI

2017

Spectral element method for modeling Lamb wave interaction with open and closed crack

Hu Sun, Aijia Zhang, X. Qing, Yishou Wang

DOI

2016

Integrated Structural Health Monitoring Technology

X. Qing, Hu Sun, Yishou Wang

2015

Integrated Structural Health Monitoring System for Civil Aircraft Structures

X. Qing, Hu Sun, Ming-Yue Lu

DOI

2014

航空结构中Lamb波传播的谱有限元模拟及损伤识别技术研究

孙虎

《南京航空航天大学》

2014

基于传递阻抗能量的无基准Lamb波裂纹检测

何志全，周丽，孙虎

《工程力学》

2013

基于分形维数的复合材料结构损伤成像

孙虎，周丽

《仪器仪表学报》

2013

Fractal dimension-based damage imaging for composites

Li Zhou, Hu Sun, Zhiquan He

DOI

2013

A damage index based damage recognition and localization algorithm of high accuracy

Li Zhou, Pei Jin, Hu Sun

Journal of Vibroengineering

DOI

2013

Lamb wave mode conversion-based crack detection for plate-like structures without baseline information

Li Zhou, Zhiquan He, Hu Sun

Journal of Vibroengineering

DOI

2012

基于谱元法的裂纹梁Lamb波传播特性研究

孙虎，周丽

《工程力学》

2012

Modeling Lamb Wave Propagation in Damaged Structures Based upon Spectral Element Method

Hu Sun, Li Zhou

DOI

2012

Analysis of damage characteristics for cracked composite structures using spectral element method

Hu Sun, Li Zhou

精选作品

期刊论文

基于声发射技术的工业胶管隐性损伤在线监测技术研究

铁磁性套管脉冲涡流检测快速理论模型研究

人工智能驱动的复合材料结构超声导波损伤监测技术

基于脉冲涡流检测的铁磁性金属套管缺陷图像处理方法（英文）

Remote Field Eddy Current Monitoring of Hole-Edge Cracks in Bolted Joints: Theoretical Modeling and Experimental Validation

Lamb wave-based cross-domain damage identification for CFRP composite structures using a modular deep learning framework

Few-shot cross-domain corrosion damage localization based on ultrasonic guided waves and metalocator

A Cross-Domain Corrosion Identification Algorithm of Aircraft Structures Based on Domain Adaptation Regression

A physics-informed dual-stream convolutional neural network method for in-situ continuous bolt preload monitoring and detection

Eddy current Sensing-Enabled smart composite Bolts: Fabrication and Self-Diagnosis capabilities for Hole-Edge damage monitoring

A Generalized Zero-Shot Regression Framework for Cross-Domain Damage Identification in Composite Structures

Anisotropy-compensated wavefield imaging: precise delamination mapping in composites via wavenumber-angle-depth analysis

电磁脉冲涡流检测下金属管道缺陷检测研究

螺栓连接结构孔边损伤定量化监测技术研究进展

Multilayer Cooperative Particle Swarm Optimizer for Feature Selection in Structural Health Monitoring

Asymmetric multi-task deep learning with location attention for structural damage detection

An interpretable evolutionary broad learning system for damage identification in aircraft structures using Lamb waves

A Supervised Scene Adaptive Model for Identifying Impact Load with Few Samples

Damage Presence, Localization, and Quantification of Aircraft Structure Based on End-to-End Deep Learning Framework

Monitoring of Mixed Failure Mode in CFRP Bolted Joint Structures Based on a Modular Piezoresistive Sensing Network

厦门大学重大装备健康管理技术研究团队 2023年度研究工作进展

Damage Quantification Method for Aircraft Structures Based on Multitask CNN-LSTM and Transfer Learning

An intelligent CFRP bolt with embedded carbon nanotube eddy current sensors for damage self‐diagnosis of bolted composite joints

A hybrid FCN-BiGRU with transfer learning for low-velocity impact identification on aircraft structure

A novel Lamb wave-based multi-damage dataset construction and quantification algorithm under the framework of multi-task deep learning

A novel damage index integrating piezoelectric impedance and ultrasonic guided wave for damage monitoring of bolted joints

An Improved Probabilistic Diagnosis Imaging Algorithm for Quantifying Hole-edge Crack Growth

Corrosion quantification of plate-type structures using Lamb wavefield and monogenic signal processing.

基于脉冲涡流的套管缺陷检测方法研究

基于附加质量的单点模态振型参数损伤识别研究

基于改进经验傅里叶分解技术的结构模态参数及损伤识别研究

Adhesively bonding a reusable PZT transducer for structural health monitoring (SHM) with an ethylene-acrylic acid copolymer adhesive

Lamb wavefield-based monogenic signal processing for quantifying delamination in composite laminates

An island-bridge packaging piezoelectric sensor for structural health monitoring in high-strain environments

A Novel Pentagonal EC Sensing Array Film for Quantifying Hole-Edge Crack of Bolted Joints

Identification and imaging of multi-defects on a complicated composite structure by ultrasonic guided wave

A multi-level damage classification technique of aircraft plate structures using Lamb wave-based deep transfer learning network

Transient eddy current response to pulsed eddy current testing inside a ferromagnetic casing

Prognosis of fatigue cracks in an aircraft wing using an adaptive tunable network and guided wave based structural health monitoring

Domain Adaptation in Intelligent Ultrasonic Logging Tool: From Microseismic to Pulse-Echo

RFEC Based Oil Downhole Metal Pipe Thickness Measurement

A Local TR-MUSIC Algorithm for Damage Imaging of Aircraft Structures

Quantifying Hole-Edge Crack of Bolt Joints by Using an Embedding Triangle Eddy Current Sensing Film

A Study on Ferromagnetic Casing Wall Thinning Evaluation Based on Pulsed Eddy Current Testing

Application of multisynchrosqueezing transform for structural modal parameter identification

A new interleaving eddy current array-based sensing film for fatigue crack quantification of bolted joints

铁磁性套管脉冲涡流检测的时域解析解

On-site monitoring of bearing failure in composite bolted joints using built-in eddy current sensing film

Hidden corrosion detection using laser ultrasonic guided waves with multi-frequency local wavenumber estimation.

Time-domain modeling analysis of pulsed eddy current testing on ferromagnetic casing.

An Eddy Current-Based Structural Health Monitoring Technique for Tracking Bolt Cracking

An Improved Matching Pursuit-Based Temperature and Load Compensation Method for Ultrasonic Guided Wave Signals

一种铁磁管道中远场涡流的伪峰移除方法

On-Site Health Monitoring of Composite Bolted Joint Using Built-In Distributed Eddy Current Sensor Network

Failure Monitoring of Bolted Joints by Using Eddy Current Array Sensing Film

Identification and Compensation Technique of Non-Uniform Temperature Field for Lamb Wave-and Multiple Sensors-Based Damage Detection

Propagation characteristics of ultrasonic weld-guided waves in Friction stir welding joint of same material.

A Reference Matching-Based Temperature Compensation Method for Ultrasonic Guided Wave Signals

Piezoelectric Transducer-Based Structural Health Monitoring for Aircraft Applications

Study on Damage Detection Resolution Based on Lamb Wave and TR-MUSIC Algorithm

Secondary Peak Separation of Remote Field Eddy Current Testing in Ferromagnetic Pipes

Fatigue Crack Identification in Weld Zone of Bogie Using Guided Wave

Baseline-free damage imaging for metal and composite plate-type structures based on similar paths

A two-dimensional eddy current array–based sensing film for estimating failure modes and tracking damage growth of bolted joints

Active Monitoring of Fatigue Crack in the Weld Zone of Bogie Frames Using Ultrasonic Guided Waves

Crack Monitoring for Hot-Spot Areas Under Time-Varying Load Condition Based on FCM Clustering Algorithm

Quantitative monitoring of hole-edge damage growth using eddy current array sensor-based intelligent bolt

High Strain Survivability of Piezoceramics by Optimal Bonding Adhesive Design

A novel eddy current array sensing film for quantitatively monitoring hole-edge crack growth in bolted joints

Random demodulation for structural health monitoring excited by the five-cycle sine burst

Numerical modeling of the load effect on PZT-induced guided wave for load compensation of damage detection

Spectral element method for modeling Lamb wave interaction with open and closed crack

Integrated Structural Health Monitoring Technology

Integrated Structural Health Monitoring System for Civil Aircraft Structures

航空结构中Lamb波传播的谱有限元模拟及损伤识别技术研究

基于传递阻抗能量的无基准Lamb波裂纹检测

基于分形维数的复合材料结构损伤成像

Fractal dimension-based damage imaging for composites