莫易敏

期刊论文

1. 莫易敏，王相，王哲，蒋华梁，李琼（2025）. 基于IHHO-Stacking集成模型的车辆驾驶性评估. 《汽车技术》.
2. 莫易敏，林阳，余自豪，彭承荣（2025）. 振动对电连接器接触压力影响规律的仿真研究. 《机械设计与制造》.
3. Qinxi Cai, Yimin Mo (2025). Research on control strategy of hybrid electric vehicle air conditioning based on disturbance feedforward compensation. International Conference on Power Electronics and Artificial Intelligence.DOI
4. Qingchun Liu, Wuxin Yu, Yi-Min Mo, Jun Wang, Chang-Ye Liu, Ye Hong, Qiang Zhang, Feng-Jie Chen (2025). Synergistic anti-friction performance and lubricating film mechanism of erucamide and N-phenyl-α-naphthylamine in polyurea grease at elevated temperatures. RSC Advances.DOI
5. 章德平，吕俊成，莫易敏，胡强，徐铁，高勇（2024）. 轮毂轴承性能对后桥传动效率影响的试验研究. 《机械研究与应用》.
6. 莫易敏，余波，彭承荣，徐铮（2024）. 结构参数对电连接器接触性能的影响及优化. 《机械设计与制造》.
7. Hong Zhang, Yi-Min Mo, Juncheng lv, Jun Wang (2024). Emergency braking response characteristics of polyol ether borate (PEB) brake fluid in a wide temperature range. Proceedings of the Institution of mechanical engineers. Part D, journal of automobile engineering.DOI
8. Minghao Ding, Yi-Min Mo, Hong Zhang, Qingchun Liu (2024). Synergistic Effect of Acrylate of Dialkyl Dithiophosphoric Acid Combined with Molybdenum Dialkyl Dithiocarbamate as Additives in Gear Oil. Lubricants.DOI
9. Hong Zhang, Yi-Min Mo, Chang-Ye Liu, Jun Wang (2024). Probing the Synergy of Calcium Sulfonate Complex Soap and Polyurea Complex Thickener Towards Good Lubrication and Rheological Properties. Journal of tribology.DOI
10. 莫易敏，孔祥馗，洪叶，王骏，覃瑜（2023）. 涡轮增压发动机用0W-20润滑油减摩性能研究. 《润滑与密封》.
11. 莫易敏，汪锦波，张鸿，吕俊成，王哲（2023）. 轮毂轴承润滑脂综合性能评价及试验研究. 《数字制造科学》.
12. 洪小锋，莫易敏，毛万鑫，洪叶（2023）. 汽车空调风道噪声仿真与优化. 《数字制造科学》.
13. Wei Xiong, Fang Xie, Gang Xu, Yumei Li, Ben Li, Yimin Mo, Fei Ma, Keke Wei (2023). Co-estimation of the model parameter and state of charge for retired lithium-ion batteries over a wide temperature range and battery degradation scope. Renewable Energy.DOI
14. Hongyuan Ye, Yi-Min Mo, Xiang-Kui Kong (2023). Development of turbocharged engine bench test adapted to multiple driving cycles for lubricants fuel economy. International Journal of Engine Research.DOI
15. Hong Zhang, Yi-Min Mo, Qingchun Liu, Jun Wang, Qian Li (2023). Optimization of the Tribological Performance and Service Life of Calcium Sulfonate Complex—Polyurea Grease Based on Unreplicated Saturated Factorial Design. Lubricants.DOI
16. Qingchun Liu, Yi-Min Mo (2023). Effect of Friction Parameters on Tribological Properties of Erucamide as Grease Additive on GCr15 Steel. Journal of tribology.DOI
17. Qingchun Liu, Yi-Min Mo, Juncheng Lv, Hong Zhang (2023). Effects of Erucamide and N-phenyl-α-naphthylamine on the Friction and Torque Behaviors of Grease on Roller Bearings. Lubricants.DOI
18. Hong Zhang, MO Yi-min, Juncheng Lv, Jun Wang (2023). Tribological Behavior of WS2 Nanoparticles as Additives in Calcium Sulfonate Complex–Polyurea Grease. Lubricants.DOI
19. Delai Zhang, MO Yi-min, Minghao Ding, Yongbin Liang (2023). Optimization of Rollover Crashworthiness and Vehicle Mass Based on Unreplicated Saturated Factorial Design. Applied Sciences.DOI
20. Ye Yoon Hong, MO Yi-min, Juncheng Lv, Jun Wang (2023). Tribological Properties of Polymer Friction Improvers Combined with MoDTC/ZDDP at Different Temperatures. Lubricants.DOI
21. Qingchun Liu, MO Yi-min (2023). Effect of Erucamide as Polyurea Grease Additive on Tribological Properties of GCr15 Steel. Tribology Transactions.DOI
22. 莫易敏，余自豪，林阳，彭承荣（2022）. 基于粒子群算法优化连接器结构参数的研究. 《武汉理工大学学报》.
23. 莫易敏，熊钊，王骏，胡恒（2022）. 基于驾驶性的车辆蠕行加速度信号处理方法研究. 《数字制造科学》.
24. 莫易敏，张偶，刘青春，吕俊成，罗旭（2022）. 低黏度润滑油对涡轮增压发动机影响的试验研究. 《润滑与密封》.
25. 莫易敏，夏凯，张平（2022）. 基于Opt LHD-RSM的汽车电连接器接触件优化. 《数字制造科学》.
26. 覃雄臻，莫易敏，覃佳亮，郭胜会（2022）. 实际工况下判定螺纹联接松动失效的FEM研究. 《机械设计与制造》.
27. 莫易敏，刘青春，高烁，吕俊成（2022）. 某小型客车侧翻简化模型关键结构优化设计. 《机械设计与制造》.
28. 章德平，吕俊成，莫易敏，高勇（2022）. 齿轮油对后桥功率损耗影响的试验研究. 《机械研究与应用》.
29. 莫易敏，莫仁杰，李其明，刘杰，杨君健，黄业财（2022）. 基于真实齿面的准双曲面齿轮传动误差研究. 《机械传动》.DOI
30. 吴疆，莫易敏，刘青春，韦学军（2022）. 微型汽车轮毂轴承脂摩擦性能优化研究. 《机械传动》.
31. 莫易敏，毛万鑫，张偶，蒋华梁（2022）. 车辆加速升挡工况驾驶性评价研究. 《数字制造科学》.
32. Ye Hong, Yi-Min Mo, Jun Wang, Xiang-Kui Kong, Qingchun Liu (2022). Simulation and experimental research on the influence of lubrication on the comprehensive friction of TGDI engine. Industrial Lubrication and Tribology.DOI
33. Jun Wang, MO Yi-min (2022). Online Monitoring of Automotive Engine Lubricating Oil Based on Internet of Things Technology. Wireless Communications and Mobile Computing.DOI
34. 莫易敏，石尧，黄林，叶鹏（2021）. 电连接器许用电流计算模型. 《机械设计与研究》.DOI
35. 莫易敏，张鸿，梁军勇，吴疆，毛万鑫（2021）. 基于油门固定开度的汽车驾驶性评价模型. 《武汉理工大学学报(信息与管理工程版)》.
36. 莫易敏，罗旭，刘青春，吕俊成，张偶（2021）. 低黏度润滑油对汽车燃油经济性的影响研究. 《汽车技术》.DOI
37. 莫易敏，胡恒，王骏，熊钊（2021）. 基于神经网络的车辆急加速工况驾驶性评价研究. 《汽车技术》.DOI
38. 莫易敏，黄林，石尧，叶鹏（2021）. 基于元胞自动机的电连接器接触电阻微动磨损研究. 《数字制造科学》.
39. 于李，黄文龙，莫易敏（2020）. 某MPV车型主动进气格栅的匹配研究. 《企业科技与发展》.
40. 周廷美，刘敏，莫易敏，谢熊亮（2020）. 研磨参数对等高齿研磨质量的影响研究. 《机械设计与制造》.DOI
41. 莫易敏，胡启奇，刘杰，杨君健，董济兴，梁耀航（2020）. 准双曲面齿轮热后接触区质量控制研究. 《机械传动》.DOI
42. 于李，黄文龙，莫易敏（2020）. 基于SPC的后桥齿轮精车质量控制研究. 《汽车零部件》.DOI
43. Xiong Wei, Yi-Min Mo, Zhang Feng (2020). Identification of Parameters in Li-Ion Battery Model by Least Squares Method with Variable Forgetting Factor. International Journal of Computational Methods.DOI
44. Xiong Wei, MO Yi-min, Cong Yan (2020). Online State-of-Health Estimation for Second-Use Lithium-Ion Batteries Based on Weighted Least Squares Support Vector Machine. IEEE Access.DOI
45. MO Yi-min, Jun Wang, Ye Yoon Hong, Xiao Yu Yang, Juncheng Lv (2020). Study on the Influence of Low-Viscosity Engine Oil on Engine Friction and Vehicle Worldwide Harmonized Light Vehicles Test Cycle Fuel Economy. SAE technical papers on CD-ROM/SAE technical paper series.DOI
46. Xiong Wei, MO Yi-min, Cong Yan (2020). Lithium-Ion Battery Parameters and State of Charge Joint Estimation Using Bias Compensation Least Squares and the Alternate Algorithm. Mathematical Problems in Engineering.DOI
47. MO Yi-min, Shenghui Guo, Xiaohui Qin, Jian Jun Qin, Xin Lei Gao, K. Zhan (2020). Loosening and Strength Failure Calculation Models of Screwed Joints Under Complex Working Condition Loading. Iranian Journal of Science and Technology Transactions of Mechanical Engineering.DOI
48. MO Yi-min, Shenghui Guo, Xiongzhen Qin, Jialiang Qin, Kui Zhan, Xinshang Gao (2020). Research on the Numerical Calculation Method for Antiloosening Performance of Screwed Joints under Complex Working Conditions. Mathematical Problems in Engineering.DOI
49. 高新尚，周廷美，莫易敏，郭胜会，占魁（2019）. 横向振动下螺栓临界松动位移载荷的研究. 《机械工程与自动化》.
50. 周廷美，刘杰，莫易敏，谢冲，梁耀航（2019）. 准双曲面齿轮热处理畸变及接触区影响研究. 《机械传动》.DOI
51. 莫易敏，杨君健，王玥琦，谢冲，刘杰，梁耀航（2019）. 装炉方式对等高齿热处理畸变一致性的影响研究. 《机械传动》.DOI
52. 莫易敏，刘青春，吕俊成，沈鹏，夏青，李铁铮（2019）. 基于简化模型的B柱抗弯性能优化. 《武汉理工大学学报(交通科学与工程版)》.
53. 莫易敏，高烁，吕俊成，刘青春，叶畅（2019）. 基于双响应面法的汽车座椅多目标稳健性优化. 《武汉理工大学学报(交通科学与工程版)》.
54. 莫易敏，杨君健，李其明，黄业财（2019）. 基于传动误差控制的准双曲面齿轮NVH影响研究. 《武汉理工大学学报(信息与管理工程版)》.
55. 莫易敏，雷志丹，姜宏霞，王光良（2019）. 润滑油对变速箱传动效率影响的试验研究. 《机械设计与制造》.DOI
56. 周廷美，饶思敏，莫易敏，刘昌业（2019）. 微型客车车身参数对翻滚性能的影响研究. 《机械设计与制造》.DOI
57. 莫易敏，向科鹏，高勇，姚亮（2019）. 密封圈对轮毂轴承阻力的影响分析与试验探究稿. 《机械设计与制造》.DOI
58. 莫易敏，何超，高勇，姚亮（2019）. 负游隙对轮毂轴承摩擦力矩的影响研究. 《机械设计与制造》.
59. 莫易敏，徐亚平，向科鹏，李姮（2019）. 轮毂轴承摩擦力矩的影响因素分析及其优化研究. 《机械设计与制造》.DOI
60. 莫易敏，李其明，杨君健，刘杰，黄业财（2019）. 基于正交试验的准双曲面齿轮研磨参数优化研究. 《机械传动》.DOI
61. 刘昌业，莫易敏，韦勇，梁永彬（2019）. 微车上部结构强度仿真效率提升设计与验证. 《机械设计与制造》.DOI
62. 叶畅，周廷美，莫易敏，吕俊成，高烁，刘青春（2019）. 基于冲击试验的座椅骨架结构优化设计. 《数字制造科学》.
63. 莫易敏，王玥琦，赵马龙，谢冲（2019）. 等高齿准双曲面齿轮切齿控制方法的优化试验. 《数字制造科学》.
64. 莫易敏，熊钊，王骏，胡杰，洪叶（2019）. 基于MatLab与C/C++混合编程的弹流润滑数值算法改进. 《润滑与密封》.
65. 章德平，莫易敏，高勇，杨军胜（2019）. 微型汽车驱动桥传动效率的试验研究. 《广西大学学报(自然科学版)》.DOI
66. 周廷美，余翔宇，莫易敏，谢雄亮（2019）. 后桥主锥轴承预紧模型与动态拧紧理论的研究. 《机械设计与制造》.DOI
67. 莫易敏，刘青春，高烁，叶畅，刘昌业（2019）. 基于多刚体模型的某客车侧翻关键结构灵敏度分析. 《数字制造科学》.
68. 吕俊成，莫易敏，王峰，徐芳（2019）. 梯形截面梁弯曲吸能特性研究及优化. 《机械设计与制造》.DOI
69. Xiong Wei, MO Yi-min, Zhang Feng (2019). Lithium-ion Battery Modeling and State of Charge Estimation. Integrated ferroelectrics.DOI
70. 刘昌业，莫易敏，梁永彬，王峰，沈鹏，谢业军（2018）. 基于某微车顶压工况下B柱轻量化优化设计. 《武汉理工大学学报(交通科学与工程版)》.
71. 汤春球，张继伟，莫易敏，覃雄臻，覃佳亮（2018）. 扭矩转角法工艺与检测方法. 《机械设计与研究》.
72. 刘传波，段茂，莫易敏，张若楠，鲁力（2018）. 基于某车型发动机前舱进气的影响与优化. 《武汉理工大学学报(交通科学与工程版)》.
73. 常建娥，李铁铮，莫易敏，王峰，谢业军（2018）. 基于侧面碰撞工况下B柱抗弯性能优化设计. 《武汉理工大学学报(交通科学与工程版)》.
74. 刘昌业，莫易敏，韦勇，梁永彬，席小婷（2018）. 面向侧翻工况下小客车上部结构耐撞性研究. 《武汉理工大学学报(交通科学与工程版)》.
75. 刘传波，孙静明，莫易敏（2018）. 螺纹紧固件防松性能影响因素研究. 《现代制造工程》.
76. 林智桂，莫易敏，王峰，徐东辉（2018）. 汽车侧倾稳定角与翻滚性能研究. 《机械设计与制造》.
77. 刘昌业，莫易敏，韦勇，梁永彬，徐东辉（2018）. 基于平台翻滚的微型客车耐撞性研究. 《汽车工程》.
78. MO Yi-min, Peng Fei Shen, Juncheng Lv, Zhigui Lin, Yongbin Liang, Changye Liu (2018). A study of multibody modeling and calibration method for FMVSS 208 rollover test. International Journal of Crashworthiness.DOI
79. 莫易敏，张德来，向科鹏，陈龙龙，何超（2017）. 等速驱动轴传动效率影响因素分析及试验研究. 《武汉理工大学学报(交通科学与工程版)》.
80. 莫易敏，张青，苏东，石志华，徐敏，韩楠楠（2017）. 焊接边位置对双帽梁吸能特性的影响研究. 《机械设计》.
81. 周廷美，谢冲，莫易敏，谢雄亮，余翔宇（2017）. 基于正交试验的桥壳参数对后桥传动效率的影响研究. 《武汉理工大学学报(交通科学与工程版)》.
82. 莫易敏，雷志丹，王骏，徐芳，吕俊成（2017）. 微型客车侧碰安全性与B柱厚度影响关系研究. 《武汉理工大学学报(交通科学与工程版)》.
83. 周廷美，严燕，莫易敏，刘昌业（2017）. 小客车侧翻试验仿真研究与影响因素分析. 《武汉理工大学学报(交通科学与工程版)》.
84. 莫易敏，谢业军，徐芳，梁永彬，林智桂（2017）. 基于正交试验法的B柱抗弯性能研究与优化. 《武汉理工大学学报(交通科学与工程版)》.
85. 王峰，莫易敏，廖鸿胡，吕俊成，林智桂（2017）. 基于NSGA-Ⅱ算法的铝合金材料本构方程反求方法研究. 《武汉理工大学学报(交通科学与工程版)》.
86. Feng Wang, MO Yi-min, Hong-Hu Liao, Juncheng Lv, Zhigui Lin (2017). Research on the Reverse Method of Aluminum Alloy Material’s Constitutive Equation Based On Multi-Objective Optimization.DOI
87. Zong-Bin Huang, MO Yi-min, Juncheng Lv, Feng Wang, Fang Xing Xu (2017). Optimization for Bending Behavior of Thin-Walled Beams with Trapezoid Cross-Section Based on Approximate Model.DOI
88. Changye Liu, MO Yi-min, Yong Wei, Zhigui Lin (2017). Simulation Study and Influencing Factors Analysis of Mini - car Platform Tilting Test. International Conference on Manufacturing Science and Engineering (ICMSE).DOI
89. Yong Wei, Changye Liu, MO Yi-min, Juncheng Lv, Yongbin Liang, Feng Wang (2017). Experiment and Simulation Study on Rolling Platform Tire Subsystem. International Conference on Mechatronics, Materials, Chemistry and Computer Engineering (ICMMCCE).DOI
90. 莫易敏，柴淑枫，王俊平，曹甜马，易成名（2016）. 半轴轴承游隙对整车传动效率影响的探究. 《机械设计》.
91. 莫易敏，姚亮，王骏，胡强，黄华波（2016）. 基于主成分分析与BP神经网络的发动机故障诊断. 《武汉理工大学学报(交通科学与工程版)》.
92. Juncheng Lv, Yong Wei, Tang Yun-jun, Feng Wang, MO Yi-min (2016). Research on Reappearance Technique of Body Acceleration with The Frontal Crashworthiness based on Modular Design.DOI
93. 吕俊成，莫易敏，袁智军，王峰，张杰（2015）. 泡沫铝材料在微型汽车纵梁中的应用研究. 《武汉理工大学学报(交通科学与工程版)》.
94. 王峰，莫易敏，吕俊成，黄峰，林智桂（2015）. 焊接翻边对薄壁梁吸能特性的影响研究. 《武汉理工大学学报(信息与管理工程版)》.
95. MO Yi-min, Junping Wang, Jun Wang, Tuo Dong, Wenjun Zhou (2015). Experimental Research on the Impact of Lubricating Oils on Engine Friction and Vehicle Fuel Economy.DOI
96. MO Yi-min, Jun Wang, Junping Wang, Wenjun Zhou, Tuo Dong (2015). Experimental Research on the Impact of Engine oils on Vehicle Fuel Economy. International Conference on Advanced Design and Manufacturing Engineering (ICADME).DOI
97. 张和平，王晓斌，莫易敏，满健康，王赓，陈璟（2014）. 拧紧速度对螺栓转矩系数的影响分析. 《武汉理工大学学报(交通科学与工程版)》.
98. 莫易敏，王金涛，刘念，梁玮，李宇峰，柴淑枫（2014）. 微型汽车车架轻量化研究. 《武汉理工大学学报(交通科学与工程版)》.
99. 莫易敏，满健康，王晓斌，王赓，牛德蒙（2014）. 螺栓强度等级对转矩系数的影响分析. 《武汉理工大学学报(交通科学与工程版)》.
100. Feng Wang, MO Yi-min, Juncheng Lv, Feng Yun Huang, Qing He (2014). Numerical studies on STFD-HAT sections under axial dynamic impact. Thin-Walled Structures.DOI
101. 莫易敏，梁玮，王金涛，张杰（2013）. 微型汽车车身直线焊接单元的伺服系统设计. 《机电工程》.
102. 吴慧，莫易敏，陈亭志，涂德先（2013）. 基于ADAMS/Car的某微型车前悬架优化分析. 《武汉理工大学学报(信息与管理工程版)》.
103. 王金涛，莫易敏，张杰，梁玮（2013）. 基于PLC的架车机电气控制系统设计. 《机电一体化》.
104. 王旺平，莫易敏，田蜜，胡志刚（2012）. 微型汽车传动系统效率建模与试验验证. 《武汉理工大学学报》.
105. Bingyang Luo, Bo Zhao, MO Yi-min (2011). The study and simulation of Clutch control strategy in starting process. International Conference on Mechanic Automation and Control Engineering.DOI
106. MO Yi-min (2011). Design and Implementation of Locomotive Liveware Submitting System Based on WCF. Journal of Wuhan University of Technology-Mater Sci Ed.
107. 莫易敏，赵雷刚，潘丽娜，汤春球（2010）. 发动机表面振动限值的智能确定方法研究. 《武汉理工大学学报》.
108. 莫易敏，王峰，吕俊成，曲艳阳（2010）. 微型汽车离合器摩擦副瞬态温度场分析与验证. 《武汉理工大学学报》.
109. Leigang Zhao, MO Yi-min, Lina Pan (2010). Study on engine test real-time monitoring and early-warning system. International Conference on Signal Processing Systems (ICSPS).DOI
110. Qingping Shi, MO Yi-min (2010). Research on calculation of average temperature of friction plate surface of mini car clutch. International Conference on Signal Processing Systems (ICSPS).DOI
111. Leigang Zhao, MO Yi-min, Lina Pa (2010). Research of characteristic vector based on HHT in rotary machine failure diagnostics. International Conference on Mechanic Automation and Control Engineering.DOI
112. Qingping Shi, MO Yi-min (2010). The research of the automatic control system of mini car clutch. International Conference on Mechanic Automation and Control Engineering.DOI
113. Feng Huang, MO Yi-min, Juncheng Lv (2010). Study on Heat Fading of Phenolic Resin Friction Material for Micro-automobile Clutch. International Conference on Measuring Technology and Mechatronics Automation (ICMTMA).DOI
114. Zou Wei, MO Yi-min, Zuoping Yao (2010). Programming Innovation of BIW with Flexible Manufacturing Flexibility of Workshop Instead of Line. International Conference on Measuring Technology and Mechatronics Automation (ICMTMA).DOI
115. MO Yi-min (2010). Mechanical Property Analysis of Steel Plate Bundled Packaging. Journal of Wuhan University of Technology-Mater Sci Ed.
116. MO Yi-min (2010). Design of DC Motor Speed Control System of Mini-vehicle of Automatic Clutch. Journal of Wuhan University of Technology-Mater Sci Ed.
117. MO Yi-min (2010). Simulation of Press Shop Production Plan in Small Car Factory. Journal of Wuhan University of Technology-Mater Sci Ed.
118. 吕俊成，莫易敏，周廷美，汤春球（2009）. 微型汽车离合器摩擦材料摩擦磨损性能的研究. 《武汉理工大学学报》.
119. 徐晓科，莫易敏，汤春球，吕俊成（2009）. 微型汽车离合器摩擦副温度场研究. 《现代制造工程》.DOI
120. 熊俊，莫易敏，吕俊成（2009）. 汽车制造业车身车间焊钳改进的研究. 《机械工程师》.
121. Jun Xiao, Hongxia Jiang, Chunqiu Tang, MO Yi-min, Jinfang Xie (2009). Research on Dry Resistance Load Test of Diesel Locomotive for Energy Saving. Asia-Pacific Power and Energy Engineering Conference (APPEEC).DOI
122. MO Yi-min (2009). Design and Implementation of Plan Management System in Press Shop of Mini and Small Car Factory. Journal of Wuhan University of Technology-Mater Sci Ed.
123. MO Yi-min (2009). Judge Rule's Study on Longitudinal Impulse of Passenger Trains. Journal of Wuhan University of Technology-Mater Sci Ed.
124. 吕俊成，莫易敏，汤春球（2008）. 经济型汽车膜片弹簧离合器的主要问题及研究思路(英文). 《机电工程技术》.
125. 刘安阵，莫易敏，吕俊成，汤春球（2008）. 经济型汽车离合器动力学分析. 《机械工程师》.
126. 高辉辉，黄继雄，莫易敏，汤春球，吕俊成（2008）. 经济型汽车干摩擦式离合器的磨损及影响因素. 《机械》.
127. MO Yi-min (2008). Fault Diagnosis Expert System for Diesel Locomotive Based on Fault Diagnosis Binary Tree. Zhongguo tiedao kexue.
128. MO Yi-min (2007). Train's Vertical Impulse Analyzer Based on Virtual Instruments and ARM. Yibiao jishu yu chuanganqi.
129. MO Yi-min (2007). Testing and Researching of Train Vibration Comfort Based on Virtual Instrument Technology. Railway Locomotive & Car.
130. MO Yi-min (2007). Development and Application of Information Management System about Disassembling Repair. Railway Locomotive & Car.
131. MO Yi-min (2006). Study on Train's Impulse Analyzer Based on ARM. Mechanical Engineering & Automation.
132. MO Yi-min (2006). Using Autocorrelation Analysis to Build the Evaluating Model of Train Impulse Grade. Journal of Wuhan University of Technology-Mater Sci Ed.
133. MO Yi-min (2006). Design and Application of JT-6 Management in the Locomotive Detection System. Railway Locomotive & Car.
134. MO Yi-min (2006). Signal frequency analysis and its application in the train vertical impulse analysis.
135. MO Yi-min (2006). Research and Realization of the Economical Oil Pot Liquid Level Supervisory System. Mechanical Engineering & Automation.
136. MO Yi-min (2006). Study of Locomotive Energy Source Synthetical Experiment Console. Railway Locomotive & Car.
137. MO Yi-min (2006). Research and Realization of the Locomotive Depot Office Automated System on the Basis of Workflow. Railway Locomotive & Car.
138. MO Yi-min (2005). Design of the Inner-leakage Intelligent Detection Instrument. Modern Electronic Technique.
139. MO Yi-min (2005). The Study About The Sensor of Locomotive Shoe Brake. Journal of Wuhan University of Technology-Mater Sci Ed.
140. MO Yi-min (2005). File Administration in the Office Automation System of Locomotive Depot. Railway Locomotive & Car.
141. MO Yi-min (2005). Designing of Decomposed Working Manage System about Locomotive Small-auxiliary Repairing. Railway Locomotive & Car.
142. MO Yi-min (2005). Detecting Wheelset Processing Control System Based on Radio Frequency Identification. Journal of Wuhan University of Technology-Mater Sci Ed.
143. MO Yi-min (2004). Industrial Automatic Control Systems Based on Information Management. Control Engineering of China.
144. MO Yi-min (2004). The Dynamics and Temperature Field Three-dimensional Data of Engine Valve. Internal combustion Engines.
145. MO Yi-min, Pan Yun-ping, Xiumei Wang (2003). The tribological properties of the hot-extrusion nylon coating in the oil well environment. Journal of Wuhan University of Technology-Mater Sci Ed.DOI
146. MO Yi-min (2003). APPLICATION OF LINEAR ARRAY CHARGE-COUPLED DEVICE TO AUTOMATIC LENGTH MEASUREMENT SYSTEM. Nondestructive Testing.
147. MO Yi-min (2003). An Information Management System Based on C/S Model. Journal of Wuhan Automotive Polytechnic University.

书籍章节

1. Zun‐Yi Deng, MO Yi-min, Xueqin Gao, Yi Ning (2012). Study of Master Manipulator Control System for Teleoperation. Lecture notes in electrical engineering.DOI