雷作胜｜上海大学｜学者主页

2026

连铸板坯直轧感应加热过程温度均匀性分析

罗景澄，侯艳萍，程桥，卢海彪，黄锦锋，钟云波，雷作胜

《中国冶金》

DOI

2026

滑动水口控流下结晶器偏流与凝固的电磁搅拌调控

卢海彪，杨旭东，刘长亮，黄俊杰，钟云波，雷作胜

《中国冶金》

DOI

2026

Optimization of Inductor Performance Based on Temperature and Dross Generation in Hot-Dip Galvanizing

Xianwen Luo, Qiao Cheng, Haibiao Lu, Yunbo Zhong, Zuosheng Lei

Metallurgical and Materials Transactions B

DOI

2026

The Effect of Cell Orientations on Quasi‐Static Compression Behaviors of AlSi 10 Mg Kelvin/Weaire–Phelan Foams

Guijia Gao, Haohua Li, Chunhui Sha, Haibiao Lu, Weili Ren, Yunbo Zhong, Zuosheng Lei

Advanced Engineering Materials

DOI

2025

基于机理模型和人工智能大模型的板坯结晶器电磁搅拌多物理场预测

黄俊杰，卢海彪，钟云波，任忠鸣，李伟，陈勇彪，雷作胜

《连铸》

DOI

2025

Enhanced energy absorption properties of Sierpinski triangle-inspired multi-layer high-fractal structures

Chunhui Sha, Guijia Gao, Haohua Li, Haibiao Lu, Weili Ren, Yunbo Zhong, Zuosheng Lei

Mechanics of Advanced Materials and Structures

DOI

2025

Enhanced mechanical properties of robinson triangle inspired geometric hierarchical penrose-tiling structure

Chunhui Sha, Guijia Gao, Haohua Li, Haibiao Lu, Weili Ren, Yunbo Zhong, Zuosheng Lei

Materials Today Communications

DOI

2025

Investigation into quasi-static compression behaviors of AlSi10Mg closed-cell/semi-closed-cell Kelvin foams

Guijia Gao, Chunhui Sha, Haohua Li, Haibiao Lu, Weili Ren, Yunbo Zhong, Zuosheng Lei

Journal of Alloys and Compounds

DOI

2025

Optimization of Power Curve in Induction Heating Tundish During Multi‐Ladle Teeming

Qiao Cheng, Xianwen Luo, Haibiao Lu, Yunbo Zhong, Weili Ren, Zuosheng Lei

steel research international

DOI

2025

Overcoming Marangoni Migration in Immiscible Alloys: Gradient Magnetic Field-Induced Spatial and Morphological Regulation of Minority Phase Revealed by X-ray Computed Tomography

Yunbo Zhong, Zhonghan Qin, Weili Ren, Zuosheng Lei, Bangfei Zhou, Wenhao Lin, Tianxiang Zheng, Chuanying Xi

Metallurgical and Materials Transactions A

DOI

2024

Analysis of Transient Flow and Inclusion Transport in Vertical-Bending Slab Continuous Caster with Mold Electromagnetic Stirring

Haibiao Lu, Xiaochen Xie, Yunbo Zhong, Changgui Cheng, Weili Ren, Zuosheng Lei

Metallurgical and Materials Transactions B

DOI

2024

Study of Flow and Zinc Dross Removal in Hot-Dip Galvanizing with Combined Traveling Magnetic Field

Xianwen Luo, Haibiao Lu, Yunbo Zhong, Weili Ren, Zuosheng Lei

Materials

DOI

2024

Determination of interdiffusion coefficients in single crystal superalloys based on solute distribution at the dendritic scale using the Gaussian solution model

Hongbin Yu, Chuanxin Shi, Tianhan He, Congjiang Zhang, Haoyu Zhou, Weili Ren, Xiaotan Yuan, Biao Ding, Haibiao Lu, Yunbo Zhong, Zuosheng Lei, Peter Kaehuei Liaw

Vacuum

DOI

2024

Study on the dendritic growth and grain boundary formation in the suddenly expanded cross-section of single crystal superalloy during directional solidification process

Congjiang Zhang, Yilin Zhou, Chuanxin Shi, Haoyu Zhou, Chen Shen, Hongbin Yu, Xiaotan Yuan, Weili Ren, Haibiao Lu, Yunbo Zhong, Zuosheng Lei, Tianxiang Zheng, Peter Kaehuei Liaw

Journal of Manufacturing Processes

DOI

2024

Strong‐Yet‐Ductile Eutectic Alloys Employing Cocoon‐Like Nanometer‐Sized Dislocation Cells (Adv. Mater. 33/2024)

Peijian Shi, Yi Li, Xin Sheng Jiang, Zhe Shen, Runguang Li, Zhongze Lin, Qiang Li, Biao Ding, Tianxiang Zheng, Liang Xue, Na Min, Jianchao Peng, Hui Li, Weili Ren, Zuosheng Lei, Yang Ren, C.T. Liu, Yunbo Zhong, Evan Ma

Advanced Materials

DOI

2024

Strong‐Yet‐Ductile Eutectic Alloys Employing Cocoon‐Like Nanometer‐Sized Dislocation Cells

Advanced Materials

DOI

2024

Evaluation of Mold Electromagnetic Stirring in Slab Continuous Casting Based on the Steel/Slag Interface Behavior

Haibiao Lu, Yunbo Zhong, Changgui Cheng, Weili Ren, Zhongming Ren, Zuosheng Lei, Zhe Shen

Metallurgical and Materials Transactions B

DOI

2024

Effect of Magnetic Field Configuration on Stray-Crystal Formation with Different Platform Sizes during Directional Solidification of Single-Crystal Superalloy

Keke Lu, Congjiang Zhang, Xiaotan Yuan, Hongbin Yu, Weili Ren, Biao Ding, Haibiao Lu, Yunbo Zhong, Zuosheng Lei, Qiuliang Wang, Qiuliang Wang, Peter Kaehuei Liaw, Xuezhi Qin, Lanzhang Zhou

Acta Metallurgica Sinica (English Letters)

DOI

2024

Understanding the formation and evolution of low-angle grain boundaries in Nickel-Based single crystal superalloys

Xiaotan Yuan, Congjiang Zhang, Weili Ren, Biao Ding, Haibiao Lu, Yunbo Zhong, Zuosheng Lei, Tianxiang Zheng, Qiang Li, Qiuliang Wang, Qiuliang Wang, Peter Kaehuei Liaw, Xuezhi Qin, Lanzhang Zhou

Materials Characterization

DOI

2024

Optimization of grain-selection behavior in the spiral selector during Cusp-magnetic-field-assisted directional solidification of single-crystal superalloy

Congjiang Zhang, Xingjin Hu, Xiaotan Yuan, Weili Ren, Haibiao Lu, Biao Ding, Qiang Li, Tianxiang Zheng, Zuosheng Lei, Yunbo Zhong, Ang Zhang, Peter Kaehuei Liaw

Journal of Materials Research and Technology

DOI

2023

基于加权极限学习机的连铸板坯质量预测

卢海彪，张辉琪，刘雨寒，武星，钟云波，雷作胜

《冶金自动化》

2023

板坯连铸结晶器电磁搅拌流场模拟

卢海彪，张辉琪，钟云波，任维丽，雷作胜

《连铸》

2023

Investigation into quasi-static compressive behaviors of several kinds of honeycomb like structures in three axial directions

Guijia Gao, Haibiao Lu, Chunhui Sha, Weili Ren, Yunbo Zhong, Zuosheng Lei

Composite Structures

DOI

2023

Numerical Simulation of Flow and Argon Bubble Distribution in a Continuous Casting Slab Mold under Different Argon Injection Modes

Zexian He, Qiao Cheng, Haibiao Lu, Yunbo Zhong, Changgui Cheng, Jingxin Song, Zuosheng Lei

Metals

DOI

2023

Bioinspired, heredity-derived hierarchical bulk multifunctional copper alloys

Peijian Shi, Zhe Shen, Hongguang Wang, Zhi Li, Yejun Gu, Yi Li, Jie Yan, Zhongze Lin, Mingyang Wang, Yinpan Yang, Chunyan Ling, Biao Ding, Na Min, Jianchao Peng, Junhua Luan, Tengshi Liu, Weili Ren, Zuosheng Lei, Yangtao Zhou, Yi Liu, Ningning Liang, Peter A. van Aken, Yang Ren, Yunbo Zhong, Pan Liu, Huajian Gao, Yuntian Theodore Zhu

Materials Today

DOI

2023

Study on the homogeneity of tilted dendritic structures in single crystal superalloys

Xiaotan Yuan, Congjiang Zhang, Hongbin Yu, Weili Ren, Biao Ding, Haibiao Lu, Yunbo Zhong, Zuosheng Lei, Qiuliang Wang, Qiuliang Wang, Peter Kaehuei Liaw, Xuezhi Qin, Lanzhang Zhou

Journal of Materials Research and Technology

DOI

2023

Primary-dendrite-pattern regulation by secondary branch during the directional solidification of the single crystal superalloy

Xiaotan Yuan, Xingjin Hu, Congjiang Zhang, Hongbin Yu, Weili Ren, Biao Ding, Haibiao Lu, Yunbo Zhong, Zuosheng Lei, Qiuliang Wang, Qiuliang Wang, Peter Kaehuei Liaw, Xuezhi Qin, Lanzhang Zhou

Materials Characterization

DOI

2022

气刀对热镀锌锅流场影响的数值模拟

李嘉勋，卢海彪，王异军，钟云波，雷作胜

《钢铁研究学报》

2022

Numerical simulation of EMS position on flow, solidification and inclusion capture in slab continuous casting

Haibiao Lu, Yunbo Zhong, Zhongming Ren, Weili Ren, Changgui Cheng, Zuosheng Lei

Journal of Iron and Steel Research International

DOI

2022

Synthesis of single metallic crystal in microgravity simulated by static magnetic field

Wenhao Lin, Ying Liu, Bangfei Zhou, Hao Cai, Zhe Shen, Weili Ren, Zuosheng Lei, Chunmei Liu, Tianxiang Zheng, Yunbo Zhong, Bo Lü, Lei Zhang, Qiuliang Wang

Scripta Materialia

DOI

2022

Quality Prediction of Continuous Casting Slabs Based on Weighted Extreme Learning Machine

Yuhan Liu, Haibiao Lu, Huiqi Zhang, Xing Wu, Yunbo Zhong, Zuosheng Lei

IEEE Access

DOI

2021

高频调幅交变电磁场金属液滴悬浮振荡的3维数值模拟

连景杰，郭加宏，雷作胜

《上海大学学报(自然科学版)》

2021

Influence of M-EMS on Fluid Flow and Initial Solidification in Slab Continuous Casting

Guoliang Liu, Haibiao Lu, Bin Li, Chenxi Ji, Jiangshan Zhang, Qing Liu, Zuosheng Lei

Materials

DOI

2021

Numerical Simulation of In-mold Electromagnetic Stirring on Slide Gate Caused Bias Flow and Solidification in Slab Continuous Casting

Haibiao Lu, Bin Li, Jiaxun Li, Yunbo Zhong, Zhongming Ren, Zuosheng Lei

ISIJ International

DOI

2020

电磁冶金技术研究新进展

任忠鸣，雷作胜，李传军，玄伟东，钟云波，李喜

《金属学报》

2020

Enhancement of removing inclusions from liquid melt film during the ESR process assisted by a static magnetic field

Yifeng Guo, Zhibin Xia, Zhe Shen, Qiang Li, Chuxiong Sun, Tianxiang Zheng, Weili Ren, Zuosheng Lei, Yunbo Zhong

Journal of Materials Processing Technology

DOI

2020

Numerical Simulation for the Influence of EMS Position on Fluid Flow and Inclusion Removal in a Slab Continuous Casting Mold

Bin Li, Haibiao Lu, Yunbo Zhong, Zhongming Ren, Zuosheng Lei

ISIJ International

DOI

2020

Instabilities of soap film structures in square cuboid frame

Wang Chen, Chunhui Sha, Zuosheng Lei

The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics

DOI

2019

AZ61镁合金电磁连铸过程流场-温度场-组织的数值模拟

张威武，汪渊源，李彬，任忠鸣，钟云波，雷作胜

《中国有色金属学报》

DOI

2019

Physical Modeling of Asymmetrical Flow in Slab Continuous Casting Mold due to Submerged Entry Nozzle Clogging with the Effect of Electromagnetic Stirring

Bin Li, Haibiao Lu, Zhe Shen, Xiaohui Sun, Yunbo Zhong, Zhongming Ren, Zuosheng Lei

ISIJ International

DOI

2019

Magnetic field–dependent microstructure evolution and magnetic property of Fe–6.5 Si–0.05 B alloy during solidification

Chunmei Liu, Yunbo Zhong, Zhe Shen, Licheng Dong, Tianxiang Zheng, Weili Ren, Zuosheng Lei, Zhongming Ren

Journal of materials research/Pratt's guide to venture capital sources

DOI

2019

Influence of EMS on Asymmetric Flow with Different SEN Clogging Rates in a Slab Continuous Casting Mold

Bin Li, Haibiao Lu, Yunbo Zhong, Zhongming Ren, Zuosheng Lei

Metals

DOI

2019

Steel/Slag Interface Behavior under Multifunction Electromagnetic Driving in a Continuous Casting Slab Mold

Xiaohui Sun, Bin Li, Haibiao Lu, Yunbo Zhong, Zhongming Ren, Zuosheng Lei

Metals

DOI

2019

Evolutions of the Micro- and Macrostructure and Tensile Property of Cu-15Ni-8Sn Alloy During Electromagnetic Stirring-Assisted Horizontal Continuous Casting

Zhe Shen, Bangfei Zhou, Jie Ping Zhong, Yunbo Zhong, Tianxiang Zheng, Licheng Dong, Yong Zhai, Weili Ren, Zuosheng Lei, Zhongming Ren

Metallurgical and Materials Transactions B

DOI

2019

Revealing influence mechanism of a transverse static magnetic field on the refinement of primary dendrite spacing during directional solidification

Zhe Shen, Bangfei Zhou, Yunbo Zhong, Tianxiang Zheng, Weili Ren, Zuosheng Lei, Zhongming Ren

Journal of Crystal Growth

DOI

2019

Effect of an axial high static magnetic field on the crystal orientation and magnetic property of Fe-4.5 wt% Si alloy during bulk solidification

Chunmei Liu, Yunbo Zhong, Zhe Shen, Tianxiang Zheng, Licheng Dong, Weili Ren, Zuosheng Lei, Zhongming Ren

Materials Letters

DOI

2019

Effect of a transverse weak magnetic field on the texture evolution and magnetic property of Fe-1.0 wt.% Si alloy during bulk solidification

Chummei Liu, Yunbo Zhong, Zhe Shen, Licheng Dong, Tianxiang Zheng, Weili Ren, Zuosheng Lei, Zhongming Ren

Materials Research Express

DOI

2018

高频调幅交变电磁场中金属液滴悬浮振荡特性的数值模拟分析

朱宏达，雷作胜，郭加宏

《上海大学学报(自然科学版)》

2018

电磁搅拌对Q345D连铸坯凝固组织的影响

杨海峰，汪渊源，李廷刚，李彬，孙晓辉，梁小凯，雷作胜

《连铸》

2018

Numerical investigation of bubble dynamics and heat transfer in subcooling pool boiling under low gravity

Tianhao Yi, Zuosheng Lei, Jianfu Zhao

International Journal of Heat and Mass Transfer

DOI

2018

Two Paradigms on Study Slab Continuous Casting Process with Mold Electromagnetic Stirring

Zuosheng Lei, Bin Li, Yueming Zhou, Xing Wu, Yunbo Zhong, Zhongming Ren

IOP Conference Series Materials Science and Engineering

DOI

2018

Structural Transformation of Bilayer Ferro-foams Caused by Homogeneous Static Magnetic Field

Wang Chen, Hua-Qiao Dong, Song-Bao Wang, Zuosheng Lei, Jiahong Guo

IOP Conference Series Materials Science and Engineering

DOI

2017

旋转磁场对钢包浇注末期底部钢液旋涡的影响研究

王旭东，李彬，雷作胜

《上海金属》

2017

Computation of Equilibrium Bilayer Monodisperse Foam Structures Using the Surface Evolver

Fuyang Li, Chengchuan Zhang, Kenneth A. Brakke, Zuosheng Lei

Scientific Reports

DOI

2017

Refinement of primary Si in the bulk solidified Al-20 wt.%Si alloy assisting by high static magnetic field and phosphorus addition

Chen Xu, Yunbo Zhong, Tianxiang Zheng, Zhe Shen, Jiang Wang, Lijun Fan, Yong Zhai, Minghu Peng, Bangfei Zhou, Weili Ren, Zuosheng Lei, Zhongming Ren, Qiong He

Journal of Alloys and Compounds

DOI

2014

颗粒导电性对铁-硅复合镀层形貌及硅含量的影响

龙琼，钟云波，李甫，王怀，周俊峰，任维丽，雷作胜

《中南大学学报(自然科学版)》

2014

旋转磁场对高硅铝合金凝固过程中相组织演变的影响

李甫，钟云波，龙琼，王江，郑天祥，王怀，陈旭，雷作胜，任维丽，任忠鸣

《中国有色金属学报》

2014

施加电磁搅拌的板坯连铸结晶器内流场数值模拟

房心强，韦如军，郭加宏，雷作胜

《水动力学研究与进展A辑》

2013

Parametric instability of a liquid metal sessile drop under the action of low-frequency alternating magnetic fields

Zuosheng Lei, Jiahong Guo, Y. Fautrelle, Roland Ernst, J. Etay, Zhongming Ren

Journal of Hydrodynamics

DOI

2013

Numerical Simulation of Bubble Behavior before Inclined Solidified Front

Zuosheng Lei, Chaoyue Chen, Xiaoxing Jin, Yunbo Zhong, Zhongming Ren

ISIJ International

DOI

2012

静磁场下电渣重熔轴承钢的研究

陈光，钟云波，冯美龙，雷作胜，任维丽，任忠鸣

《上海金属》

2012

FC Mold Ⅱ电磁制动中磁场匹配对金属液流影响

贾皓，张振强，于湛，邓康，雷作胜，任忠鸣

《金属学报》

2012

水口浸入深度与拉坯速度对电磁制动下板坯结晶器内金属流动的影响

贾皓，王敏，张振强，邓康，雷作胜，任忠鸣

《上海金属》

2011

Ar气泡在连铸坯固/液界面处运动行为的物理模拟研究

金小礼，雷作胜，于湛，张浩斌，邓康，任忠鸣

《金属学报》

2011

连铸结晶器内非稳定流动的研究进展

张小伟，邓康，雷作胜，任忠鸣

《钢铁研究学报》

2011

射流型磁场排布方式控制结晶器内液流的实验研究

王寅，张振强，于湛，贾皓，邓康，雷作胜，任忠鸣

《金属学报》

2011

钢液中气泡上浮去除夹杂物的研究现状

郭浩，雷作胜，金小礼，韩欣，邓康，任忠鸣

《上海金属》

2011

Experimental Investigation of Fluid Flow in CC Mold With Electromagnetic Filed

Zuosheng Lei

2010

板坯电磁制动结晶器内流体流动的研究

于湛，张振强，任忠鸣，雷作胜，邓康

《金属学报》

2010

静磁场下气泡在板坯连铸结晶器内运动行为的物理模拟

张浩斌，雷作胜，金小礼，任忠鸣，邓康，钟云波

《工程科学学报》

2010

气泡在不互溶两相流体界面运动行为的数值模拟

金小礼，雷作胜，张浩斌，邓康，任忠鸣

《过程工程学报》

2010

模底砖孔径影响大钢锭浇注及凝固过程的数值模拟

张文，钟云波，王赟，王江，雷作胜，任忠鸣

《特种铸造及有色合金》

2009

强磁场中电沉积Ni-P合金的研究

贾晶，钟云波，汪超，雷作胜，任维丽，任忠鸣

《上海金属》

2009

电磁净化中间包中钢液流场及传输行为的水模拟研究

赵利荣，王保军，钟云波，王贺利，王赟，雷作胜，任维丽

《上海金属》

2009

电磁净化中间包传输特性的水模拟

王保军，钟云波，王赟，雷作胜，任维丽，任忠鸣

《工程科学学报》

2009

304L不锈钢连铸坯表面振痕形貌及宏观偏析成因分析

马宁博，雷作胜，金小礼，任忠鸣

《特种铸造及有色合金》

2009

强磁场复合交变电流作用下Zn-30wt%Bi偏晶合金的凝固

王江，钟云波，任维丽，雷作胜，任忠鸣，徐匡迪

《物理学报》

2009

Effect of high magnetic field on the primary dendrite arm spacing and segregation of directionally solidified superalloy DZ417G

Tao Zhang, Weili Ren, Jianwen Dong, Xu Li, Zhongming Ren, Guanghui Cao, Yunbo Zhong, Kang Deng, Zuosheng Lei, Guo Jianting

Journal of Alloys and Compounds

DOI

2009

Effect of magnetic field on electroplating Ni/nano-Al2O3 composite coating

Chao Wang, Yunbo Zhong, Jiang Wang, Zhiqiang Wang, Weili Ren, Zuosheng Lei, Zhongming Ren

Journal of Electroanalytical Chemistry

DOI

2009

Numerical and Experimental Analysis of Flow Phenomenon in Centrifugal Flow Tundish

Yun Wang, Yunbo Zhong, Baojun Wang, Zuosheng Lei, Weili Ren, Zhongming Ren

ISIJ International

DOI

2008

Influence of dc electric current on the hardness of thermally aged Cu–Cr–Zr alloy

Zhiqiang Wang, Yunbo Zhong, Guanghui Cao, Chao Wang, Jiang Wang, Weili Ren, Zuosheng Lei, Zhongming Ren

Journal of Alloys and Compounds

DOI

2008

Physical Simulation of Nozzle Electromagnetic Brake in Twin-Roll Strip Casting

Zhan Yu, Zuosheng Lei, Qisheng Li, Kang Deng, Zhongming Ren

steel research international

DOI

2008

Microstructure and electrical conductivity of Cu–Cr–Zr alloy aged with dc electric current

Zhiqiang Wang, Yunbo Zhong, Zuosheng Lei, Weili Ren, Zhongming Ren, Kang Deng

Journal of Alloys and Compounds

DOI

2008

Effects of parallel magnetic field on electrocodeposition behavior of Ni/nanoparticle composite electroplating

Chao Wang, Yunbo Zhong, Weili Ren, Zuosheng Lei, Zhongming Ren, Jing Jia, Airong Jiang

Applied Surface Science

DOI

2006

Development of soft - contact electromagnetic continuous casting

Zuosheng Lei

Continuous Casting

2004

Experimental Study on Mold Oscillation-Less Continuous Casting Process Under High Frequency Amplitude-Modulated Magnetic Field

Zuosheng Lei, Zhongming Ren, Yan Yonggang, Kang Deng

Acta Metallurgica Sinica

2004

MOLD FLUX CHANNEL DYNAMIC PRESSURE IN ELECTROMAGNETIC CONTINUOUS CASTING

Zuosheng Lei, Zhongming Ren, Yan Yonggang, Kang Deng

Acta Metallurgica Sinica

2002

连铸结晶器弯月面区温度波动的模拟研究

雷作胜，任忠鸣，张邦文，邓康

《上海大学学报(自然科学版)》

2002

软接触气膜连铸的实验研究

罗鸿博，邓康，程常桂，雷作胜，任忠鸣

《上海大学学报(自然科学版)》

精选作品

期刊论文

连铸板坯直轧感应加热过程温度均匀性分析

滑动水口控流下结晶器偏流与凝固的电磁搅拌调控

Optimization of Inductor Performance Based on Temperature and Dross Generation in Hot-Dip Galvanizing

The Effect of Cell Orientations on Quasi‐Static Compression Behaviors of AlSi 10 Mg Kelvin/Weaire–Phelan Foams

基于机理模型和人工智能大模型的板坯结晶器电磁搅拌多物理场预测

Enhanced energy absorption properties of Sierpinski triangle-inspired multi-layer high-fractal structures

Enhanced mechanical properties of robinson triangle inspired geometric hierarchical penrose-tiling structure

Investigation into quasi-static compression behaviors of AlSi10Mg closed-cell/semi-closed-cell Kelvin foams

Optimization of Power Curve in Induction Heating Tundish During Multi‐Ladle Teeming

Overcoming Marangoni Migration in Immiscible Alloys: Gradient Magnetic Field-Induced Spatial and Morphological Regulation of Minority Phase Revealed by X-ray Computed Tomography

Analysis of Transient Flow and Inclusion Transport in Vertical-Bending Slab Continuous Caster with Mold Electromagnetic Stirring

Study of Flow and Zinc Dross Removal in Hot-Dip Galvanizing with Combined Traveling Magnetic Field

Determination of interdiffusion coefficients in single crystal superalloys based on solute distribution at the dendritic scale using the Gaussian solution model

Study on the dendritic growth and grain boundary formation in the suddenly expanded cross-section of single crystal superalloy during directional solidification process

Strong‐Yet‐Ductile Eutectic Alloys Employing Cocoon‐Like Nanometer‐Sized Dislocation Cells (Adv. Mater. 33/2024)

Strong‐Yet‐Ductile Eutectic Alloys Employing Cocoon‐Like Nanometer‐Sized Dislocation Cells

Evaluation of Mold Electromagnetic Stirring in Slab Continuous Casting Based on the Steel/Slag Interface Behavior

Effect of Magnetic Field Configuration on Stray-Crystal Formation with Different Platform Sizes during Directional Solidification of Single-Crystal Superalloy

Understanding the formation and evolution of low-angle grain boundaries in Nickel-Based single crystal superalloys

Optimization of grain-selection behavior in the spiral selector during Cusp-magnetic-field-assisted directional solidification of single-crystal superalloy

基于加权极限学习机的连铸板坯质量预测

板坯连铸结晶器电磁搅拌流场模拟

Investigation into quasi-static compressive behaviors of several kinds of honeycomb like structures in three axial directions

Numerical Simulation of Flow and Argon Bubble Distribution in a Continuous Casting Slab Mold under Different Argon Injection Modes

Bioinspired, heredity-derived hierarchical bulk multifunctional copper alloys

Study on the homogeneity of tilted dendritic structures in single crystal superalloys

Primary-dendrite-pattern regulation by secondary branch during the directional solidification of the single crystal superalloy

气刀对热镀锌锅流场影响的数值模拟

Numerical simulation of EMS position on flow, solidification and inclusion capture in slab continuous casting

Synthesis of single metallic crystal in microgravity simulated by static magnetic field

Quality Prediction of Continuous Casting Slabs Based on Weighted Extreme Learning Machine

高频调幅交变电磁场金属液滴悬浮振荡的3维数值模拟

Influence of M-EMS on Fluid Flow and Initial Solidification in Slab Continuous Casting

Numerical Simulation of In-mold Electromagnetic Stirring on Slide Gate Caused Bias Flow and Solidification in Slab Continuous Casting

电磁冶金技术研究新进展

Enhancement of removing inclusions from liquid melt film during the ESR process assisted by a static magnetic field

Numerical Simulation for the Influence of EMS Position on Fluid Flow and Inclusion Removal in a Slab Continuous Casting Mold

Instabilities of soap film structures in square cuboid frame

AZ61镁合金电磁连铸过程流场-温度场-组织的数值模拟

Physical Modeling of Asymmetrical Flow in Slab Continuous Casting Mold due to Submerged Entry Nozzle Clogging with the Effect of Electromagnetic Stirring

Magnetic field–dependent microstructure evolution and magnetic property of Fe–6.5 Si–0.05 B alloy during solidification

Influence of EMS on Asymmetric Flow with Different SEN Clogging Rates in a Slab Continuous Casting Mold

Steel/Slag Interface Behavior under Multifunction Electromagnetic Driving in a Continuous Casting Slab Mold

Evolutions of the Micro- and Macrostructure and Tensile Property of Cu-15Ni-8Sn Alloy During Electromagnetic Stirring-Assisted Horizontal Continuous Casting

Revealing influence mechanism of a transverse static magnetic field on the refinement of primary dendrite spacing during directional solidification

Effect of an axial high static magnetic field on the crystal orientation and magnetic property of Fe-4.5 wt% Si alloy during bulk solidification

Effect of a transverse weak magnetic field on the texture evolution and magnetic property of Fe-1.0 wt.% Si alloy during bulk solidification

高频调幅交变电磁场中金属液滴悬浮振荡特性的数值模拟分析

电磁搅拌对Q345D连铸坯凝固组织的影响

Numerical investigation of bubble dynamics and heat transfer in subcooling pool boiling under low gravity

Two Paradigms on Study Slab Continuous Casting Process with Mold Electromagnetic Stirring

Structural Transformation of Bilayer Ferro-foams Caused by Homogeneous Static Magnetic Field

旋转磁场对钢包浇注末期底部钢液旋涡的影响研究

Computation of Equilibrium Bilayer Monodisperse Foam Structures Using the Surface Evolver

Refinement of primary Si in the bulk solidified Al-20 wt.%Si alloy assisting by high static magnetic field and phosphorus addition

颗粒导电性对铁-硅复合镀层形貌及硅含量的影响

旋转磁场对高硅铝合金凝固过程中相组织演变的影响

施加电磁搅拌的板坯连铸结晶器内流场数值模拟

Parametric instability of a liquid metal sessile drop under the action of low-frequency alternating magnetic fields

Numerical Simulation of Bubble Behavior before Inclined Solidified Front

静磁场下电渣重熔轴承钢的研究

FC Mold Ⅱ电磁制动中磁场匹配对金属液流影响

水口浸入深度与拉坯速度对电磁制动下板坯结晶器内金属流动的影响

Ar气泡在连铸坯固/液界面处运动行为的物理模拟研究

连铸结晶器内非稳定流动的研究进展

射流型磁场排布方式控制结晶器内液流的实验研究

钢液中气泡上浮去除夹杂物的研究现状

Experimental Investigation of Fluid Flow in CC Mold With Electromagnetic Filed

板坯电磁制动结晶器内流体流动的研究

静磁场下气泡在板坯连铸结晶器内运动行为的物理模拟

气泡在不互溶两相流体界面运动行为的数值模拟

模底砖孔径影响大钢锭浇注及凝固过程的数值模拟

强磁场中电沉积Ni-P合金的研究

电磁净化中间包中钢液流场及传输行为的水模拟研究

电磁净化中间包传输特性的水模拟

304L不锈钢连铸坯表面振痕形貌及宏观偏析成因分析

强磁场复合交变电流作用下Zn-30wt%Bi偏晶合金的凝固

Effect of high magnetic field on the primary dendrite arm spacing and segregation of directionally solidified superalloy DZ417G