陈姬｜山东大学｜学者主页

2026

搅拌摩擦辅助电弧增材制造热力耦合过程的数值模拟（英文）

李龙，肖亦辰，石磊，陈姬，武传松

《稀有金属材料与工程》

2026

Experimental and numerical study on the influence of wire feeding rate on the metal transfer, molten pool behavior, and surface morphology in direct energy-deposited Al‑Zn‑Mg‑Cu alloy

Yuwen Wang, Ji Chen, Dongsheng Wu, Maoai Chen, Xue Li, Hao Deng, Qikuan Zhao, Chuansong Wu, L. Wang

Welding in the World

DOI

2026

Travel speed-dependent process stability and forming-microstructure-property relationships in cold metal transfer-based directed energy deposition of Al-Zn-Mg-Cu alloy

Yuwen Wang, Ji Chen, Xue Li, Dongsheng Wu, Qikuan Zhao, Hao Deng, Maoai Chen, Chuansong Wu, L. Wang

Journal of Materials Processing Technology

DOI

2026

Numerical simulation of thermal-fluid coupling process in the molten pool during wire arc additive manufacturing of 10CrNi3MoV steel

Xiao Shi, Xiao Shi, Xiaohui Lyu, Lei Shi, Muthu Shanmugam Mannan, Ashish Kumar, Ji Chen, Chuansong Wu, Ming Zhai, Yukui Cai

International Journal of Heat and Mass Transfer

DOI

2026

Experimental and numerical investigation of arc-bubble thermo-fluid dynamics in UFPC-assisted underwater wet flux-cored arc welding

Xuefei Cui, Shengli Li, Ji Chen, Dongsheng Wu, Hao Su, Chuansong Wu

Welding in the World

DOI

2025

Grain morphology characteristics and formation mechanism of wire-arc additive manufactured 316L stainless steel

Xue Li, Ji Chen, Yuwen Wang, Lei Shi, Dongsheng Wu, Chuansong Wu

International Journal of Thermal Sciences

DOI

2025

The effect of excitation frequency on novel three-winding magnetic field-assisted MIG welding of 7075 aluminium alloy

Xiangyang Wu, Shanqing Xu, Ji Chen, Chuansong Wu

Science and Technology of Welding & Joining

DOI

2025

Effect of Ultrasonic Frequency Pulse Current on Underwater Wet Flux-Cored Arc Welding Process of Low Carbon Steel

Lijian Wu, Ji Chen, Zhen Wen, Hao Su, Chuansong Wu

Journal of Materials Engineering and Performance

DOI

2025

Numerical investigation of arc and droplet dynamics in local dry underwater welding under varying ambient pressures

Xuefei Cui, Ji Chen, Jingheng Liang, Hao Su, Shengli Li, Chuansong Wu

International Journal of Thermal Sciences

DOI

2025

Depositing Al–Zn–Mg–Cu alloy with different positive electrode/negative electrode ratios of CMT advance process

Xiangyang Wu, Shanqing Xu, Ji Chen, Chuansong Wu

Welding in the World

DOI

2025

Experimental and simulation research on the dynamic behavior of arc and bubble in ultrasonic frequency pulse current-assisted underwater wet flux cored arc welding

Xuefei Cui, Ji Chen, Tao Zheng, Hao Su, Shengli Li, Chuansong Wu

International Journal of Heat and Mass Transfer

DOI

2025

Pore suppression and performance improvement mechanisms in wire-arc directed energy deposition of 7075 alloy

Yuwen Wang, Dongsheng Wu, Ji Chen, Hisaya Komen, Maoai Chen, Hao Su, Chuansong Wu, Manabu Tanaka

Virtual and Physical Prototyping

DOI

2025

Dynamic behavior of ultrasonic frequency pulsed current-assisted gas metal arc welding

Xuefei Cui, Ji Chen, Shengli Li, Hao Su, Lin Wang, Chuansong Wu

Physics of Fluids

DOI

2025

Modeling the effect of plate position on thermal, material flow and deposition during dissimilar friction stir welding between Al and Cu

Hao Su, Ji Chen, Wenzhen Zhao, Huan He, Chuansong Wu

Journal of Manufacturing Processes

DOI

2025

Dissimilar friction stir welding between AZ31 magnesium alloy and pure copper: Evolution mechanism from macro to micro scales

Hao Su, Shuang Li, Xue Li, Ji Chen, Chuansong Wu

Journal of Magnesium and Alloys

DOI

2025

Elucidation for the Correlation Between Material Flow and Intermixing Behavior and Joint Performances in Friction Stir Welding of Al/Cu Dissimilar Alloys

Hao Su, Ji Chen, Chuansong Wu

Metallurgical and Materials Transactions B

DOI

2024

搅拌头摆动对搅拌摩擦焊接耦合热流行为影响的三维数值模拟（英文）

宿浩，陈姬，武传松

Transactions of Nonferrous Metals Society of China

2024

轨道车辆铝合金长大薄壁脉冲复合磁控高效弧焊工艺研究

武永寿，韩晓辉，陈姬，李刚卿，李帅贞，左帅

《电焊机》

2024

Microstructure evolution and mechanical properties of ZK61 magnesium alloy fabricated via friction stir additive manufacturing

Yichen Xiao, Lei Shi, Chuansong Wu, Shengli Li, Ji Chen, Wenjian Ren

Journal of Materials Research and Technology

DOI

2024

3D modeling for effect of tool eccentricity on coupled thermal and material flow characteristics during friction stir welding

Hao Su, Ji Chen, Chuansong Wu

Transactions of Nonferrous Metals Society of China

DOI

2024

Investigating the effect of hydrostatic pressure on arc and bubble transport phenomenon in underwater wet self-shielded flux cored arc welding

Xuefei Cui, Ji Chen, Lei Shi, Shengli Li, Ning Guo, Chuansong Wu

Applied Thermal Engineering

DOI

2024

A comparative study on microstructure and mechanical properties of wire-arc directed energy deposited Al–Zn–Mg–Cu alloy based on the cold metal transfer technology

Yuwen Wang, Ji Chen, Maoai Chen, Hao Su, Ran Zong, Dongsheng Wu, Hisaya Komen, Manabu Tanaka, Chuansong Wu

Journal of Materials Research and Technology

DOI

2024

Investigating arc and molten metal transport phenomena in gas metal arc welding with Ar–CO2 gas mixtures using a numerical method

Xuefei Cui, Ji Chen, Maoai Chen, Chuansong Wu

Physics of Fluids

DOI

2024

Influence of reduced pressure on arc and weld pool properties in TIG welding

Xiaohui Han, Xuefei Cui, Yongshou Wu, Ji Chen, G.K. Zhang, Chuansong Wu

Science and Technology of Welding & Joining

DOI

2024

Revealing the mechanism of superimposing ultrasonic vibration on microstructure evolution in friction stir welding by multi-physical multi-scale simulation

Xiaohui Lyu, Chunyan Tian, Wenxin Zhang, Lei Shi, Chuansong Wu, Ji Chen, Pengfei Yu

Journal of Manufacturing Processes

DOI

2024

Intermetallic Compounds Formation in Dissimilar Friction Stir Welding of Mg/Cu Alloys

Xue Li, Qingzhen Zhao, Hao Su, Ji Chen, Chuansong Wu

Acta Metallurgica Sinica (English Letters)

DOI

2024

A heat source model for dissimilar Al/Cu friction stir welding process based on tool torque measurement

Hao Su, Ji Chen, Chuansong Wu

The International Journal of Advanced Manufacturing Technology

DOI

2024

Parameter optimization of friction stir spot welded Al 6061 and CFRTP PA6 with surface treatment and interfacial adhesion

Yu Guo, Haibin Zhao, Caijiao Ai, Jingjing Zhao, Hao Su, Ji Chen, Guoqun Zhao

Thin-Walled Structures

DOI

2023

搅拌针偏移量对铝/铜异质金属搅拌摩擦焊接过程和接头组织性能的影响

宿浩，李雪，赵庆桢，陈姬，武传松

《电焊机》

2023

Study on GMAW assisted by compound external magnetic fields in bogie manufacturing with T-joints and single-bevel grooves

Lijian Wu, Ji Chen, Xu Lu, Xiangyang Wu, Chunyang Xia, Chuansong Wu

Welding in the World

DOI

2023

Process stability and forming accuracy on wire arc additive manufactured Al–Zn–Mg–Cu alloy with different electrode positive/electrode negative ratios of CMT advance process

Yuwen Wang, Ji Chen, Maoai Chen, Hao Su, Wenbin Zhang, Chuansong Wu

Science and Technology of Welding & Joining

DOI

2022

Investigation on high-deposition-rate directed energy deposition of Al-5%Mg alloy via external compound magnetic fields

Yuwen Wang, Ji Chen, Xiangyang Wu, Maoai Chen, Hao Su, L. Wang, Chuansong Wu

Additive manufacturing

DOI

2022

Simulation of the influence of welding parameters on weld pool behavior during a TIG-MIG hybrid welding process

Xiangyang Wu, Xinyu Zhao, Ji Chen, Zhiyi Zhang, Chuansong Wu

Journal of Manufacturing Processes

DOI

2022

Homogenizing the intermetallic compounds distribution in Al/Cu dissimilar friction stir welding joint with the assistance of ultrasonic vibration

Hao Su, Qingzhen Zhao, Ji Chen, Chuansong Wu

Materials Today Communications

DOI

2022

The mechanisms of underwater wet flux-cored arc welding assisted by ultrasonic frequency pulse high-current

Ji Chen, Zhen Wen, Chuanbao Jia, Bo Zhao, Chuansong Wu

Journal of Materials Processing Technology

DOI

2022

Effect of tool eccentricity on the periodic material flow in friction stir welding process

Hao Su, Ji Chen, Chuansong Wu

International Journal of Mechanical Sciences

DOI

2022

Evolutions of material flow and intermetallic compounds, and the correlations with mechanical properties of dissimilar Al/Cu friction stir welding joints

Hao Su, Qingzhen Zhao, Ji Chen, Chuansong Wu

Journal of Materials Science

DOI

2022

The study of high-speed MIG welding assisted by compound external magnetic fields for 6N01-T6 aluminum alloy

Lijian Wu, Xiaohui Han, Xiangyang Wu, Yongshou Wu, Ji Chen, Hao Su, Chuansong Wu

Journal of Manufacturing Processes

DOI

2022

Improving spreadability of molten metal in MIG welding-brazing of aluminum to steel by external magnetic field

Lin Wang, Yiming Ma, Jie Xu, Ji Chen

Journal of Manufacturing Processes

DOI

2021

激光+GMAW复合热源焊接过程热-力耦合数值分析

吴向阳，宿浩，孙岩，陈姬，武传松

《焊接学报》

2021

Numerical analysis of molten metal behavior and undercut formation in high-speed GMAW

Ran Zong, Ji Chen, Chuansong Wu, Dianjun Lou

Journal of Materials Processing Technology

DOI

2021

Numerical simulation of coupled arc-droplet-weld pool behaviors during compound magnetic field assisted gas metal arc welding

L. Wang, Ji Chen, Shiliang Zhang, Chuansong Wu

AIP Advances

DOI

2021

Three-Dimensional Reconstruction of Welding Pool Surface by Binocular Vision

Zunan Gu, Ji Chen, Chuansong Wu

Chinese Journal of Mechanical Engineering

DOI

2021

Auxiliary energy-assisted arc welding processes and their modelling, sensing and control

L. Wang, Ji Chen, Chuansong Wu

Science and Technology of Welding & Joining

DOI

2020

Corrigendum to “A comparison of double shielded GMAW-P with conventional GMAW-P in the arc, droplet and bead formation” [J. Mater. Process. Technol. 285 (2020) 116781]

Ran Zong, Ji Chen, Chuansong Wu

Journal of Materials Processing Technology

DOI

2020

Numerical Simulation of Arc and Droplet Behaviors in TIG-MIG Hybrid Welding

Yu Han, Ji Chen, Haijun Ma, Xinyu Zhao, Chuansong Wu, Jinqiang Gao

Materials

DOI

2020

Numerical simulation of bubble and arc dynamics during underwater wet flux-cored arc welding

Bo Zhao, Ji Chen, Chuansong Wu, Lei Shi

Journal of Manufacturing Processes

DOI

2020

Numerical Investigation of Arc-Pool-Metal Vapor Behavior in GTAW with an External Magnetic Field

Yu Han, Ji Chen, Linqi Li, L. Wang, Chuansong Wu

Metals

DOI

2020

Experimental measurement of fluid flow in high-speed GMAW assisted by transverse magnetic field

Lin Wang, Chuansong Wu, Ji Chen, Jinqiang Gao

Journal of Manufacturing Processes

DOI

2020

Study of high-speed pulsed gas metal arc welding assisted by external magnetic-field

Ji Chen, Qiang Ke Chen, Chuansong Wu

Science and Technology of Welding & Joining

DOI

2020

Numerical simulations of arc plasma under external magnetic field-assisted gas metal arc welding

L. Wang, Ji Chen, ChunLi Jiang, Chuansong Wu

AIP Advances

DOI

2020

A comparison of double shielded GMAW-P with conventional GMAW-P in the arc, droplet and bead formation

Ran Zong, Ji Chen, Chuansong Wu

Journal of Materials Processing Technology

DOI

2020

Numerical investigation on the effect of process parameters on arc and metal transfer in magnetically controlled gas metal arc welding

L. Wang, Ji Chen, Chuansong Wu

Vacuum

DOI

2020

Study of high-speed GMAW assisted by compound external magnetic field

Qiang Ke Chen, Ji Chen, Sufen Lu, Yanteng Zhang, Chuansong Wu

Welding in the World

DOI

2020

Numerical analysis of arc and droplet behaviors in gas metal arc welding with external compound magnetic field

Lin Wang, Ji Chen, Chuansong Wu, Shoucheng Luan

Journal of Materials Processing Technology

DOI

2019

Influence of arc interactions on heat and mass transfer during a two-arc hybrid welding

Ji Chen, Zhikun Han, Lin Wang, Chuansong Wu

International Journal of Heat and Mass Transfer

DOI

2019

Suppression of undercut defects in high-speed GMAW through a compound magnetic field

Ji Chen, Yanteng Zhang, Chuansong Wu, Girish Kumar Padhy

Journal of Materials Processing Technology

DOI

2019

A comparison of TIG-MIG hybrid welding with conventional MIG welding in the behaviors of arc, droplet and weld pool

Ran Zong, Ji Chen, Chuansong Wu

Journal of Materials Processing Technology

DOI

2018

熔焊热过程与熔池行为数值模拟的研究进展

武传松，孟祥萌，陈姬，秦国梁

《机械工程学报》

2018

低电流TIG电弧辅助MIG高速焊咬边缺陷抑制机理及措施的研究

陈姬，魏建华，周倩，武传松

《机械工程学报》

2018

Numerical analysis of molten pool behavior during underwater wet FCAW process

Bo Zhao, Ji Chen, Chuanbao Jia, Chuansong Wu

Journal of Manufacturing Processes

DOI

2018

Single CCD-based sensing of both keyhole exit and weld pool in controlled-pulse PAW

Guokai Zhang, Chuansong Wu, Ji Chen

Welding in the World

DOI

2018

Suppression Mechanism of Low Current Auxiliary TIG Arc on High Speed TIG-MIG Hybrid Welding and Process Optimization

Ji Chen

Journal of Mechanical Engineering

DOI

2017

Influence of the external magnetic field on fluid flow, temperature profile and humping bead in high speed gas metal arc welding

Lin Wang, Chuansong Wu, Ji Chen, Jinqiang Gao

International Journal of Heat and Mass Transfer

DOI

2016

高速GMAW驼峰焊道的产生机理与抑制技术

武传松，王林，陈姬，杨丰兆，高进强

《焊接》

2016

Influence of low current auxiliary TIG arc on high speed TIG-MIG hybrid welding

Ji Chen, Ran Zong, Chuansong Wu, Girish Kumar Padhy, Qingxian Hu

Journal of Materials Processing Technology

DOI

2016

Influence of molten metal flow on undercutting formation in GMAW

Renzhe Zong, Ji Chen, Chuansong Wu, Girish Kumar Padhy

Science and Technology of Welding & Joining

DOI

2016

Backward flowing molten metal in weld pool and its influence on humping bead in high-speed GMAW

Lin Wang, Ji Chen, Chuansong Wu, Jinqiang Gao

Journal of Materials Processing Technology

DOI

2016

Influence of shielding gas on undercutting formation in gas metal arc welding

Ran Zong, Ji Chen, Chuansong Wu, Girish Kumar Padhy

Journal of Materials Processing Technology

DOI

2015

A unified 3D model for an interaction mechanism of the plasma arc, weld pool and keyhole in plasma arc welding

Xiaoxia Jian, Chuansong Wu, Guokai Zhang, Ji Chen

Journal of Physics D Applied Physics

DOI

2013

电弧焊接工艺高效化改型的研发进展

武传松，王林，陈姬，高进强

《焊接》

2011

焊接数值模拟的标准化与准则制定

C.Schwenk, 陈姬, M.Rethmeier, 武传松

《焊接》

2010

Numerical Analysis of Forming Mechanism of Hump Bead in High Speed GMAW

Ji Chen, Chuansong Wu

Welding in the World

DOI

2009

高速GMAW驼峰焊道形成过程的数值分析

陈姬，武传松

《金属学报》

2009

NUMERICAL SIMULATION OF FORMING PROCESS OF HUMPING BEAD IN HIGH SPEED GMAW

Ji Chen, Chuansong Wu

Acta Metallurgica Sinica

2007

PREDICTING OF THE COLLAPSING FOR COMPLETELY PENETRATED GTA WELD POOL

Ji Chen

Chinese Journal of Mechanical Engineering

精选作品

期刊论文

搅拌摩擦辅助电弧增材制造热力耦合过程的数值模拟（英文）

Experimental and numerical study on the influence of wire feeding rate on the metal transfer, molten pool behavior, and surface morphology in direct energy-deposited Al‑Zn‑Mg‑Cu alloy

Travel speed-dependent process stability and forming-microstructure-property relationships in cold metal transfer-based directed energy deposition of Al-Zn-Mg-Cu alloy

Numerical simulation of thermal-fluid coupling process in the molten pool during wire arc additive manufacturing of 10CrNi3MoV steel

Experimental and numerical investigation of arc-bubble thermo-fluid dynamics in UFPC-assisted underwater wet flux-cored arc welding

Grain morphology characteristics and formation mechanism of wire-arc additive manufactured 316L stainless steel

The effect of excitation frequency on novel three-winding magnetic field-assisted MIG welding of 7075 aluminium alloy

Effect of Ultrasonic Frequency Pulse Current on Underwater Wet Flux-Cored Arc Welding Process of Low Carbon Steel

Numerical investigation of arc and droplet dynamics in local dry underwater welding under varying ambient pressures

Depositing Al–Zn–Mg–Cu alloy with different positive electrode/negative electrode ratios of CMT advance process

Experimental and simulation research on the dynamic behavior of arc and bubble in ultrasonic frequency pulse current-assisted underwater wet flux cored arc welding

Pore suppression and performance improvement mechanisms in wire-arc directed energy deposition of 7075 alloy

Dynamic behavior of ultrasonic frequency pulsed current-assisted gas metal arc welding

Modeling the effect of plate position on thermal, material flow and deposition during dissimilar friction stir welding between Al and Cu

Dissimilar friction stir welding between AZ31 magnesium alloy and pure copper: Evolution mechanism from macro to micro scales

Elucidation for the Correlation Between Material Flow and Intermixing Behavior and Joint Performances in Friction Stir Welding of Al/Cu Dissimilar Alloys

搅拌头摆动对搅拌摩擦焊接耦合热流行为影响的三维数值模拟（英文）

轨道车辆铝合金长大薄壁脉冲复合磁控高效弧焊工艺研究

Microstructure evolution and mechanical properties of ZK61 magnesium alloy fabricated via friction stir additive manufacturing

3D modeling for effect of tool eccentricity on coupled thermal and material flow characteristics during friction stir welding

Investigating the effect of hydrostatic pressure on arc and bubble transport phenomenon in underwater wet self-shielded flux cored arc welding

A comparative study on microstructure and mechanical properties of wire-arc directed energy deposited Al–Zn–Mg–Cu alloy based on the cold metal transfer technology

Investigating arc and molten metal transport phenomena in gas metal arc welding with Ar–CO2 gas mixtures using a numerical method

Influence of reduced pressure on arc and weld pool properties in TIG welding

Revealing the mechanism of superimposing ultrasonic vibration on microstructure evolution in friction stir welding by multi-physical multi-scale simulation

Intermetallic Compounds Formation in Dissimilar Friction Stir Welding of Mg/Cu Alloys

A heat source model for dissimilar Al/Cu friction stir welding process based on tool torque measurement

Parameter optimization of friction stir spot welded Al 6061 and CFRTP PA6 with surface treatment and interfacial adhesion

搅拌针偏移量对铝/铜异质金属搅拌摩擦焊接过程和接头组织性能的影响

Study on GMAW assisted by compound external magnetic fields in bogie manufacturing with T-joints and single-bevel grooves

Process stability and forming accuracy on wire arc additive manufactured Al–Zn–Mg–Cu alloy with different electrode positive/electrode negative ratios of CMT advance process

Investigation on high-deposition-rate directed energy deposition of Al-5%Mg alloy via external compound magnetic fields

Simulation of the influence of welding parameters on weld pool behavior during a TIG-MIG hybrid welding process

Homogenizing the intermetallic compounds distribution in Al/Cu dissimilar friction stir welding joint with the assistance of ultrasonic vibration

The mechanisms of underwater wet flux-cored arc welding assisted by ultrasonic frequency pulse high-current

Effect of tool eccentricity on the periodic material flow in friction stir welding process

Evolutions of material flow and intermetallic compounds, and the correlations with mechanical properties of dissimilar Al/Cu friction stir welding joints

The study of high-speed MIG welding assisted by compound external magnetic fields for 6N01-T6 aluminum alloy

Improving spreadability of molten metal in MIG welding-brazing of aluminum to steel by external magnetic field

激光+GMAW复合热源焊接过程热-力耦合数值分析

Numerical analysis of molten metal behavior and undercut formation in high-speed GMAW

Numerical simulation of coupled arc-droplet-weld pool behaviors during compound magnetic field assisted gas metal arc welding

Three-Dimensional Reconstruction of Welding Pool Surface by Binocular Vision

Auxiliary energy-assisted arc welding processes and their modelling, sensing and control

Corrigendum to “A comparison of double shielded GMAW-P with conventional GMAW-P in the arc, droplet and bead formation” [J. Mater. Process. Technol. 285 (2020) 116781]

Numerical Simulation of Arc and Droplet Behaviors in TIG-MIG Hybrid Welding

Numerical simulation of bubble and arc dynamics during underwater wet flux-cored arc welding

Numerical Investigation of Arc-Pool-Metal Vapor Behavior in GTAW with an External Magnetic Field

Experimental measurement of fluid flow in high-speed GMAW assisted by transverse magnetic field

Study of high-speed pulsed gas metal arc welding assisted by external magnetic-field

Numerical simulations of arc plasma under external magnetic field-assisted gas metal arc welding

A comparison of double shielded GMAW-P with conventional GMAW-P in the arc, droplet and bead formation

Numerical investigation on the effect of process parameters on arc and metal transfer in magnetically controlled gas metal arc welding

Study of high-speed GMAW assisted by compound external magnetic field

Numerical analysis of arc and droplet behaviors in gas metal arc welding with external compound magnetic field

Influence of arc interactions on heat and mass transfer during a two-arc hybrid welding

Suppression of undercut defects in high-speed GMAW through a compound magnetic field

A comparison of TIG-MIG hybrid welding with conventional MIG welding in the behaviors of arc, droplet and weld pool

熔焊热过程与熔池行为数值模拟的研究进展

低电流TIG电弧辅助MIG高速焊咬边缺陷抑制机理及措施的研究

Numerical analysis of molten pool behavior during underwater wet FCAW process

Single CCD-based sensing of both keyhole exit and weld pool in controlled-pulse PAW

Suppression Mechanism of Low Current Auxiliary TIG Arc on High Speed TIG-MIG Hybrid Welding and Process Optimization

Influence of the external magnetic field on fluid flow, temperature profile and humping bead in high speed gas metal arc welding

高速GMAW驼峰焊道的产生机理与抑制技术

Influence of low current auxiliary TIG arc on high speed TIG-MIG hybrid welding

Influence of molten metal flow on undercutting formation in GMAW

Backward flowing molten metal in weld pool and its influence on humping bead in high-speed GMAW

Influence of shielding gas on undercutting formation in gas metal arc welding

A unified 3D model for an interaction mechanism of the plasma arc, weld pool and keyhole in plasma arc welding

电弧焊接工艺高效化改型的研发进展

焊接数值模拟的标准化与准则制定

Numerical Analysis of Forming Mechanism of Hump Bead in High Speed GMAW

高速GMAW驼峰焊道形成过程的数值分析

NUMERICAL SIMULATION OF FORMING PROCESS OF HUMPING BEAD IN HIGH SPEED GMAW

PREDICTING OF THE COLLAPSING FOR COMPLETELY PENETRATED GTA WELD POOL

会议论文

复合脉冲磁场辅助GMAW电弧-熔滴行为的数值分析