陈良｜山东大学｜学者主页

2026

Deformation behavior and failure mechanism under nonlinear continuous deformation path: an experimental and modeling study

Zinan Cheng, Guoqun Zhao, Cunsheng Zhang, Jilong Zhang, Zijie Meng, Rui Yang, Liang Chen

International Journal of Plasticity

DOI

2026

Unraveling nano-scale interfacial structure and strengthening mechanism of Al-TiB2/Mg laminate through quasi-in-situ observation

Lihua Qian, Liang Chen, Yuhui Zhao, J.E. Tang, Cunsheng Zhang, Haimin Ding, Guoqun Zhao

Journal of Magnesium and Alloys

DOI

2026

Achieving breakthrough high strength in AZ31 magnesium alloy bar via a novel single-pass extrusion process

Ruicheng Mao, Liwei Lu, Liang Chen, Wen Wang, Liang Huang, Jie Teng, Gang Liu, Yujuan Wu

Journal of Magnesium and Alloys

DOI

2026

A strategy for mitigating mechanical anisotropy of GWZ932 Mg alloy via cryogenic-annealing cyclic treatment

Guanghan Dang, J.E. Tang, Liang Chen, Wenke Wang, Xiaoxue Chen, Cunsheng Zhang

Journal of Magnesium and Alloys

DOI

2026

Effect of Sc addition on microstructural homogeneity and mechanical properties of an ultra-high strength Al-Zn-Mg-Cu alloy

Jintao Shi, Liang Chen, J.E. Tang, Zhigang Li, Jinbing Hu, Yuqing Bao, Cunsheng Zhang

Journal of Alloys and Compounds

DOI

2026

Corrigendum to “Strain-induced dynamic evolution of the T1 phase and its influence on recrystallization behavior” [Acta Materialia 308 (2026) 122032]

Kuizhao Wang, Cunsheng Zhang, Xiangshan Kong, Xiuwei Xing, Zijie Meng, Liang Chen, Xiaoxue Chen, J.E. Tang, Yubin Ke, Guoqun Zhao

Acta Materialia

DOI

2026

Achieving superior strength-ductility synergy of GNP/2024Al composites via a highly efficient two-step aging process tailoring Cu atom distribution

Kaiqiang Shen, Liang Chen, Xuemei Sun, Zhigang Li, Yuhui Zhao, Cunsheng Zhang, Jixue Zhou

Materials Science and Engineering A

DOI

2026

Enhancing performance via heterostructure in continuously extruded NiTi-reinforced Al matrix composites

Mingfu Liu, C T Zhang, Wenjie Yang, Zijie Meng, Liang Chen

Materials Science and Engineering A

DOI

2026

Mechanical degradation and corrosion behavior of low-frequency vibration assisted riveted CFRP/Al joints

Jinglei Liu, Jun Lin, Yuqing Liu, Cong Shao, Yanjin Guan, Xiangfei Kong, Liang Chen, Guoqun Zhao

Engineering Failure Analysis

DOI

2026

Interfacial microstructure and dynamic recrystallization in metallurgically bonded Al/Mg laminate fabricated by vacuum hot compression bonding

Lihua Qian, J.E. Tang, Liang Chen, Kaiqiang Shen, Xuemei Sun, Cunsheng Zhang

Journal of Alloys and Compounds

DOI

2026

Heterogeneous abnormal grain growth behaviors and corresponding deformation mechanisms of Mg alloy profile investigated through in-situ and quasi-in-situ characterizations

J.E. Tang, Liang Chen, Guanghan Dang, Xiangshan Kong, Cunsheng Zhang, Jun Lin, Guoqun Zhao

Acta Materialia

DOI

2026

Dislocation-graphene interactions and strengthening mechanisms in aluminum matrix composites: From Orowan mechanism to cross-slip

Yuhui Zhao, Liang Chen, Huijuan Guo, J.E. Tang, Xiangshan Kong, Yanjin Guan

Composites Part A Applied Science and Manufacturing

DOI

2026

Tailoring dual heterointerface structure in continuously extruded Al/steel/CF hybrid composites: Towards enhanced interfacial bonding performance

Zhao Zhang, C. S. Zhang, Z. A. Liu, Jun Yan, Yingzhi Li, Liang Chen, Guoqun Zhao

Composites Part B Engineering

DOI

2025

热压烧结制备铝/铜多层复合材料的界面结构与力学性能（英文）

沈凯强，陈良，钱丽华，阙标华，张存生

Transactions of Nonferrous Metals Society of China

2025

新型高强韧7A99铝合金反挤压工艺的数值模拟与实验研究

刘惠，唐建伟，曹金华，王德宏，付祎磊，王少华，陈良

《锻压技术》

DOI

2025

铝合金吸能梁用型材的挤压模拟及性能研究

宋夕超，刘守奎，赵中华，潘雪勇，孙雪梅，陈良

《锻压技术》

DOI

2025

Low-energy forest dislocation in dual-heterostructured CNT/2024Al composites and its effect on mechanical properties

Jun Yan, Cunsheng Zhang, Zhenyu Liu, Zhen Zhang, Liang Chen, Guoqun Zhao

International Journal of Plasticity

DOI

2025

Atomic-Scale mechanisms of Lithium-Induced grain boundary embrittlement in aluminum alloys: A First-Principles study

Guo-Zheng Feng, Xiang-Shan Kong, Cunsheng Zhang, Guoqun Zhao, Liang Chen

Computational Materials Science

DOI

2025

Abnormal grain growth mechanism and inhibiting strategy by a tailored two-step solution treatment of ZK60 Mg alloy

Guanghan Dang, Liang Chen, J.E. Tang, Yuhui Zhao, Cunsheng Zhang, Xiang-Shan Kong

Journal of Magnesium and Alloys

DOI

2025

Design and optimization of cruciform tension and shear specimen for forming limit acquisition

Zinan Cheng, Cunsheng Zhang, Yingzhi Li, Jian Qin, Fang Su, Zijie Meng, Liang Chen, Guoqun Zhao

Journal of Materials Processing Technology

DOI

2025

Enhanced strength-ductility synergy of Mg/Al laminate by coordinating the strain gradient of constituting layers

Lihua Qian, Liang Chen, Jianwei Tang, Yingfan Li, Cunsheng Zhang, Xiang-Shan Kong

Journal of Material Science and Technology

DOI

2024

Interfacial bonding mechanism in Al/Ti dissimilar friction stir welding

Yang Li, Yichen Xiao, Lei Shi, Liang Chen, Chuansong Wu, Sergey A. Mironov, Xiaochao Liu, Yunqiang Zhao

International Journal of Mechanical Sciences

DOI

2024

Microscopic strengthening and failure mechanisms of graphene/Al composite: A molecular dynamics study

Huijuan Guo, Xiaoyan Sun, Liang Chen, Yuhui Zhao, Kaiqiang Shen, Xiang-Shan Kong

Progress in Natural Science Materials International

DOI

2024

Atomic strain concentration induced by interfaces in extruded carbon nanotube reinforced 2024Al matrix composite

Jun Yan, Cunsheng Zhang, Zijie Meng, Zhenyu Liu, Liang Chen

Materials Characterization

DOI

2024

Enhancing strength and ductility of extruded Ti-alloy-reinforced Al-Mg-Si composites: Roles of interface nanostructures and chemical bonding

Mingfu Liu, Cunsheng Zhang, Zijie Meng, Zhenyu Liu, Liang Chen, Guoqun Zhao

International Journal of Plasticity

DOI

2024

Achieving the strength-ductility synergy in ultra-fined grained CNT/2024Al composites via a low-temperature aging strategy

Zhenyu Liu, Cunsheng Zhang, Jun Yan, Zijie Meng, Liang Chen, Guoqun Zhao

Composites Part B Engineering

DOI

2024

Fabrication of TiB2/6061Al composite with tailoring heterostructure and superior mechanical properties and investigation on deformation behaviors

Zhigang Li, Liang Chen, Zhenming Yue, Lihua Qian, Biaohua Que, Cunsheng Zhang

Composites Part A Applied Science and Manufacturing

DOI

2024

Nanoscale analysis of interfacial structure and its effects on mechanical properties of Mg/Al laminate reinforced by TiB2 particles

Lihua Qian, Liang Chen, Biaohua Que, Kaiqiang Shen, Guoqun Zhao, Cunsheng Zhang

Journal of Magnesium and Alloys

DOI

2024

Microstructure characterization and solid welding mechanism of TiB2/6061Al composite profile fabricated by porthole die extrusion

Zhigang Li, Liang Chen, Lihua Qian, Cunsheng Zhang, Guoqun Zhao

Materials Characterization

DOI

2024

An insight into the interfacial structure and mechanical properties of Al/Cu laminate fabricated through cold spraying and post-treatment

Jingxiao Zhang, Liang Chen, Biaohua Que, Lihua Qian, Kaiqiang Shen

Journal of Alloys and Compounds

DOI

2024

Tailoring interfacial structure and achieving excellent strength-ductility synergy of Al/Mg/Al composite via porthole die co-extrusion and post-annealing

Jianwei Tang, Liang Chen, Yuhui Zhao, Lihua Qian, Cunsheng Zhang

Materials Science and Engineering A

DOI

2024

Dynamic evolution of the T1 phase and its effect on continuous dynamic recrystallization in Al–Cu–Li alloys

Kuizhao Wang, Cunsheng Zhang, Zinan Cheng, Haibin Zhao, Zijie Meng, Liang Chen, Guoqun Zhao

International Journal of Plasticity

DOI

2024

Effects of a hybrid post-treatment on microstructure and mechanical properties of cold sprayed AA7050 deposits

Chengxin Liu, Xingrong Chu, Naijiang Wang, Jun Gao, Liang Chen

Journal of Alloys and Compounds

DOI

2024

Novel interface characteristics and strengthening mechanisms in extruded fiber(Ti)-reinforced Al-based composites

Mingfu Liu, Cunsheng Zhang, Zhenyu Liu, Zijie Meng, Jun Yan, Liang Chen, Guoqun Zhao

Journal of Materials Processing Technology

DOI

2023

固溶时效处理Mg-Zn-Al-Sn-Mn合金的微观组织演变及腐蚀行为研究（英文）

唐建伟，陈良，鲍意浩，李志刚，阙标华

Journal of Central South University

2023

复合预轧制与回归再时效平衡7A99铝合金的强度和耐蚀性（英文）

张涛，侯玉柱，阙标华，田育鑫，陈良

Transactions of Nonferrous Metals Society of China

2023

Fabrication of Al/Al-TiB2 laminate composites via hot press sintering process: An insight into the mechanical properties and fracture behavior

Biaohua Que, Liang Chen, Yongjun Chen, Lihua Qian, Guoqun Zhao, Cunsheng Zhang

Journal of Manufacturing Processes

DOI

2023

Re-dissolution behavior of secondary phases and mechanical response of CNT/2024Al composites

Zhenyu Liu, Cunsheng Zhang, Jun Yan, Zijie Meng, Liang Chen, Guoqun Zhao

Materials Characterization

DOI

2023

Enhanced strength-ductility synergy of Al/Zn/Al laminated composite with unique interface and multi-modal heterogeneous microstructure

Jianwei Tang, Liang Chen, Yongjun Chen, Lihua Qian, Biaohua Que

Materials Characterization

DOI

2023

Hot compressive deformation behavior and microstructural evolution of the spray-formed 1420 Al–Li alloy

Zijie Meng, Cunsheng Zhang, Guofang Zhang, Kuizhao Wang, Zuojiao Wang, Liang Chen, Guoqun Zhao

Journal of Materials Research and Technology

DOI

2023

The formation mechanisms and mechanical effects of lattice defects in carbon nanotube reinforced 2024Al composite

Jun Yan, Cunsheng Zhang, Zhenyu Liu, Zijie Meng, Liang Chen, Yue Mu, Guoqun Zhao

Composites Part B Engineering

DOI

2023

Effects of multi-directional forging on the microstructure and mechanical properties of TiB2 particulate reinforced 6061Al composite

Changren Tian, Liang Chen, Yongjun Chen, Zhigang Li, Lihua Qian, Guoqun Zhao

Journal of Materials Research and Technology

DOI

2023

Investigation on corrosion behaviors of Mg-Zn-Al-Sn-Mn alloy treated by solution and artificial aging

Jianwei Tang, Liang Chen, Yihao Bao, Zhigang Li, Biaohua Que

Journal of Central South University

DOI

2023

Strategy for suppressing abnormal grain growth of ZK60 Mg alloy during solution by pre-compression: A quasi-in-situ study

Zhenxu Wang, Liang Chen, Jianwei Tang, Cunsheng Zhang, Guoqun Zhao

Journal of Material Science and Technology

DOI

2023

Strengthening and toughening mechanisms of tailored Al/Al-TiB2 laminated composites fabricated by hot press sintering process

Biaohua Que, Liang Chen, Kaiqiang Shen, Guoqun Zhao, Cunsheng Zhang

Journal of Materials Processing Technology

DOI

2023

Micro-/nano-scale structure and elemental diffusion in the Al/Ti/Al sandwich structure

Mingfu Liu, Cunsheng Zhang, Haibin Zhao, Zijie Meng, Liang Chen, Guoqun Zhao

Journal of Materials Research and Technology

DOI

2023

Deformation mechanism of as-extruded Al–Cu–Li alloy with heterogeneous fiber structure

Kuizhao Wang, Cunsheng Zhang, Zinan Cheng, Zijie Meng, Liang Chen, Guoqun Zhao

Materials & Design

DOI

2023

Suppressing abnormal grain growth and switching precipitation behaviors in ZK60 Mg profile by inducing pre-tension

Jianwei Tang, Liang Chen, Zhigang Li, Biaohua Que, Guoqun Zhao, Cunsheng Zhang

Journal of Material Science and Technology

DOI

2023

Micro-/nano-scale interface structure and mechanical characteristics of the Al/Ti composite bar produced by a novel continuously-extruded technique

Mingfu Liu, Cunsheng Zhang, Zinan Cheng, Zhenyu Liu, Liang Chen, Guoqun Zhao

Materials & Design

DOI

2023

Investigation on corrosion behaviors and mechanical properties of TiB2/7075Al composites with various particle contents

Liang Chen, Xianliang Zhang, Wei Zheng, Mingkun Wang, Bo Liu, Wenchao Sun

Journal of Materials Research and Technology

DOI

2022

科教融合建设挤压成形虚拟仿真“金课”的探索与实践

郑超，刘树帅，毕见强，宋立彬，赵国群，陈良

《中国多媒体与网络教学学报(上旬刊)》

2022

大型带筋薄壁圆管铝型材挤压成形数值模拟

王少华，刘惠，陈宗强，王海龙，李占强，陈良

《锻压技术》

2022

基于试验设计和响应曲面法的大型带筋薄壁铝型材挤压工艺优化

刘惠，刘腾飞，陈宗强，王海龙，高康军，周志宇，田昌仁，陈良

《锻压技术》

2022

Coupled crystal plasticity and micromechanics damage model based on viscoplastic self-consistent theory and X-ray computed tomography

Zinan Cheng, Cunsheng Zhang, Zijie Meng, Kuizhao Wang, Liang Chen, Zhong Ji, Guoqun Zhao

International Journal of Plasticity

DOI

2022

Forming limit analysis of AA5052 sheet under bilinear strain path by designing a novel large-scale gripping fixture

Zinan Cheng, Cunsheng Zhang, Mingkui Wang, Yinghao Wang, Fang Su, Liang Chen, Wenchao Sun, Бо Лю

Journal of Materials Research and Technology

DOI

2022

Experimental study on tensile deformation behaviors under room and elevated temperatures induced by microstructure inhomogeneity of ZK60 Mg with a longitudinal weld

Jianwei Tang, Liang Chen, Guoqun Zhao, Cunsheng Zhang, Lu Sun, Junquan Yu

Journal of Magnesium and Alloys

DOI

2022

Mechanical properties and microstructural evolution of the spray formed 2195 Al–Li alloy extruded sheet at warm temperatures

Kuizhao Wang, Cunsheng Zhang, Zijie Meng, Zinan Cheng, Liang Chen, Guoqun Zhao

Journal of Materials Research and Technology

DOI

2022

Precipitation behavior and its effect on the dynamic recrystallization of a novel extruded Al-Cu-Li alloy

Kuizhao Wang, Cunsheng Zhang, Zijie Meng, Zinan Cheng, Liang Chen, Guoqun Zhao

Materials & Design

DOI

2022

Investigation on microstructure and mechanical properties of hot-rolled AZ31 Mg alloy with various cryogenic treatments

Bo Che, Liwei Lu, Jialong Zhang, Jie Teng, Liang Chen, Yong Dong Xu, Tao Wang, Liang Huang, Zhiqiang Wu

Journal of Materials Research and Technology

DOI

2022

Fabrication and strengthening mechanism of dual-phased and bimodal-sized (Si3N4p + TiB2p)/6061Al hybrid composite

Zhigang Li, Liang Chen, Biaohua Que, Liwei Lu, Guoqun Zhao, Cunsheng Zhang, Dong Quan

Materials & Design

DOI

2022

Effects of artificial aging on precipitation behavior, mechanical properties and corrosion resistance of Si3N4/6061Al composite fabricated by sintering and hot extrusion processes

Zhigang Li, Liang Chen, Biaohua Que, Guoqun Zhao, Cunsheng Zhang

Journal of Materials Processing Technology

DOI

2022

Effects of TiB2 particle and local aspect ratio on microstructure and mechanical properties of an I-shaped TiB2/6061Al composite profile

Zhigang Li, Liang Chen, Xianliang Zhang, Biaohua Que, Guoqun Zhao, Cunsheng Zhang

Materials Science and Engineering A

DOI

2022

First-principles study of substitutional solute and carbon interactions in tungsten

Xiang-Shan Kong, Chi Song, Liang Chen, Z.M. Xie, C.S. Liu, Jie Shan Hou

Tungsten

DOI

2022

Aging precipitation and its effects on mechanical properties of TiB2 particulate reinforced 7075Al composite

Xianliang Zhang, Liang Chen, Zhigang Li, Guoqun Zhao, Cunsheng Zhang

Materials Science and Engineering A

DOI

2022

Interfacial microstructure evolution and mechanical properties of inertia friction welded aluminium alloy/stainless steel joint with preheat treatment

Hong Ma, Guoliang Qin, Zongyu Dang, Shenquan Qu, Liang Chen, Peihao Geng

Materials Science and Engineering A

DOI

2021

Investigation on corrosion behavior and mechanical properties of an extruded Mg-Zn-Al-Sn-Mn alloy

Yihao Bao, Liang Chen, Jianwei Tang, Zhigang Li, Guoqun Zhao, Cunsheng Zhang

Materials Characterization

DOI

2021

Enhancing mechanical properties and corrosion resistance of a high strength 7A99 Al alloy by introducing pre-rolling in solution and aging treatments

Liang Chen, Yuzhu Hou, Zhigang Li, Guoqun Zhao, Cunsheng Zhang

Journal of Alloys and Compounds

DOI

2021

Atomic diffusion mechanism and interface nanomechanics in the Al/Ti composite structures

Mingfu Liu, Cunsheng Zhang, Zijie Meng, Guoqun Zhao, Liang Chen

Composites Part B Engineering

DOI

2021

Effects of annealing treatment on the microstructure and corrosion behavior of hot rolled AZ31 Mg alloy

Hao Chen, Jianwei Tang, Weiwei Gong, Yunpeng Gao, Feng Tian, Liang Chen

Journal of Materials Research and Technology

DOI

2021

Evolution mechanisms of charge weld during porthole die extrusion of ZK60 Mg profile

Jianwei Tang, Liang Chen, Zhigang Li, Guoqun Zhao, Cunsheng Zhang, Yang Zuo

Journal of Materials Processing Technology

DOI

2021

Microstructure characterization and corrosion behavior of hollow ZK60 Mg profile containing longitudinal welds

Jianwei Tang, Liang Chen, Zhigang Li, Guoqun Zhao, Cunsheng Zhang, Jun Pin Lin, Yang Zuo

Corrosion Science

DOI

2021

TiAl3 nucleation mechanism and atomic-scale interface features in the Al/Ti composite structures

Mingfu Liu, Cunsheng Zhang, Zijie Meng, Guoqun Zhao, Liang Chen

Composites Part B Engineering

DOI

2021

Deformation behavior and microstructure in the low-frequency vibration upsetting of titanium alloy

Jun Lin, Catalin Iulian Pruncu, Lihua Zhu, Jiao Li, Yadi Zhai, Liang Chen, Yanjin Guan, Guoqun Zhao

Journal of Materials Processing Technology

DOI

2021

Investigation on peripheral coarse grains and precipitation behavior of in-situ TiB2/Al–Cu–Mg composites with various Mg contents

Liang Chen, Shugang Zhang, Zhigang Li, Guoqun Zhao, Cunsheng Zhang, Jun Lin

Materials Science and Engineering A

DOI

2021

Numerical and experimental study on extrusion of ZK60 Mg alloy using billet with temperature gradient

Liang Chen, Qian Cheng, Jianwei Tang, Zhigang Li, Guoqun Zhao, Yang Zuo

Journal of Materials Research and Technology

DOI

2021

An Investigation on the Anisotropic Plastic Behavior and Forming Limits of an Al-Mg-Li Alloy Sheet

Yubao Wang, Cunsheng Zhang, Yinghao Wang, Guoqun Zhao, Liang Chen

Journal of Materials Engineering and Performance

DOI

2021

Microstructure evolution of AZ31B sheet deformed by electric hot temperature-controlled single point incremental forming

Haoran Zhang, Xingrong Chu, Wenke Bao, Jun Gao, Liang Chen

Materials Science and Engineering A

DOI

2021

Effects of single- and multi-stage solid solution treatments on microstructure and properties of as-extruded AA7055 helical profile

Cun-sheng ZHANG, Zhaogang Zhang, Ming-fu Liu, En-cheng BAO, Liang Chen, Guoqun Zhao

Transactions of Nonferrous Metals Society of China

DOI

2021

Anisotropic springback models of FCC metal material under severe plastic compressive deformation

Hongli Hou, Guoqun Zhao, Liang Chen, Huiping Li

International Journal of Mechanical Sciences

DOI

2021

Precipitation behavior of an Al–Cu–Li–X alloy and competing relationships among precipitates at different aging temperatures

Shuai Cui, Cunsheng Zhang, Mingfu Liu, Liang Chen, Guoqun Zhao

Materials Science and Engineering A

DOI

2021

Effects of solution and aging treatments on the microstructure and mechanical properties of cold rolled 2024 Al alloy sheet

Lu Sun, Yunyue Guo, Liang Chen, Guoqun Zhao

Journal of Materials Research and Technology

DOI

2021

Nonlinear anelastic behavior and unloading-reloading constitutive models of severe plastic compressive deformation

Hongli Hou, Guoqun Zhao, Liang Chen, Huiping Li

Journal of Materials Processing Technology

DOI

2021

Improving mechanical anisotropy and corrosion resistance of extruded AA7075 alloy by warm cross rolling and annealing

Zhigang Li, Liang Chen, Jianwei Tang, Wenchao Sun, Guoqun Zhao, Cunsheng Zhang

Journal of Alloys and Compounds

DOI

2020

人工时效对2A12铝板力学性能和强化相的影响

梁孟超，陈良，赵国群

《金属学报》

2020

Bimodal Phenomenon of the Stress–Strain Curve During Hot Compression of LA43M Mg–Li Alloy

Yi Li, Yanjin Guan, Hu Chen, Jiqiang Zhai, Jun Lin, Liang Chen

Metals and Materials International

DOI

2020

Formation of abnormal coarse grains and its effects on corrosion behaviors of solution treated ZK60 Mg alloy

Jianwei Tang, Liang Chen, Zhigang Li, Guoqun Zhao, Cunsheng Zhang

Corrosion Science

DOI

2020

Springback behavior and a new chord modulus model of copper alloy during severe plastic compressive deformation

Hongli Hou, Guoqun Zhao, Liang Chen, Huiping Li

Journal of Materials Processing Technology

DOI

2020

A comprehensive analysis on microstructure evolution of Mg-5.65Zn-0.66Zr alloy during hot deformation

Qian Cheng, Liang Chen, Jianwei Tang, Guoqun Zhao, Lu Sun, Cunsheng Zhang

Journal of Magnesium and Alloys

DOI

2020

Influence of isothermal and non-isothermal aging treatments on microstructure and properties of Al-Zn-Mg alloy helical profile

Ran Guo, Cunsheng Zhang, Mingfu Liu, Zhaogang Zhang, Liang Chen, Guoqun Zhao

Materials Characterization

DOI

2020

Response of mechanical properties and corrosion behavior of Al–Zn–Mg alloy treated by aging and annealing: A comparative study

Zhigang Li, Liang Chen, Jianwei Tang, Guoqun Zhao, Cunsheng Zhang

Journal of Alloys and Compounds

DOI

2020

Achieving three-layered Al/Mg/Al sheet via combining porthole die co-extrusion and hot forging

Jianwei Tang, Liang Chen, Guoqun Zhao, Cunsheng Zhang, Lu Sun

Journal of Magnesium and Alloys

DOI

2020

Microstructure evolution and precipitation characteristics of spray-formed and subsequently extruded 2195 Al-Li alloy plate during solution and aging process

Cunsheng Zhang, Mingfu Liu, Zijie Meng, Qingyou Zhang, Guoqun Zhao, Liang Chen, Hao Zhang, Jia Wang

Journal of Materials Processing Technology

DOI

2020

Investigation on microstructure and mechanical properties of in-situ TiB2/Al–Cu–Mg composite profile fabricated by porthole die extrusion

Shugang Zhang, Liang Chen, Zhigang Li, Guoqun Zhao, Cunsheng Zhang

Materials Science and Engineering A

DOI

2020

Microstructure evolution, plastic anisotropy, and intergranular corrosion of Al-Mg-Si sheet processed through a combination of hot extrusion and cold rolling

Zhigang Li, Liang Chen, Jianwei Tang, Guoqun Zhao, Cunsheng Zhang, Xingrong Chu

Materials Characterization

DOI

2020

Effects of artificial aging on microstructure, mechanical properties and stress corrosion cracking of a novel high strength 7A99 Al alloy

Yuzhu Hou, Liang Chen, Zhigang Li, Guoqun Zhao, Cunsheng Zhang

Materials Science and Engineering A

DOI

2020

Crystal plasticity prediction of texture evolution during helical extrusion process of aluminium alloys under three-dimensional deformation path

Zhaofei Xu, Cunsheng Zhang, Kuizhao Wang, Kai Zhang, Guoqun Zhao, Liang Chen

Journal of Alloys and Compounds

DOI

2020

Formation mechanism and evolution of surface coarse grains on a ZK60 Mg profile extruded by a porthole die

Jianwei Tang, Liang Chen, Guoqun Zhao, Cunsheng Zhang, Xingrong Chu

Journal of Material Science and Technology

DOI

2020

The identification of improved Johnson-Cook constitutive model in a wide range of temperature and its application in predicting FLCs of Al–Mg–Li sheet

Yubao Wang, Cunsheng Zhang, Ying Yuan Yang, Yinghao Wang, Guoqun Zhao, Liang Chen

Journal of Materials Research and Technology

DOI

2020

Effects of solution treatment on the microstructure and mechanical properties of naturally aged EN AW 2024 Al alloy sheet

Mengchao Liang, Liang Chen, Guoqun Zhao, Yunyue Guo

Journal of Alloys and Compounds

DOI

2020

Influence of homogenization treatment on microstructure and mechanical properties of Al-Zn-Mg alloy extruded by porthole die

Liang Chen, Shengwei Yuan, Zhigang Li, Wei Zheng, Guoqun Zhao, Cunsheng Zhang

Materials Characterization

DOI

2019

Formation mechanism of abnormal coarse grains on weld seam of extruded ZK60 alloy and the effects on mechanical properties

Jianwei Tang, Liang Chen, Guoqun Zhao, Cunsheng Zhang, Xingrong Chu

Materials Science and Engineering A

DOI

2019

Multi-objective optimization and experimental investigation on hot extruded plate of high strength Al-Zn-Mg alloy

Liang Chen, Yuqiang Li, Guoqun Zhao, Cunsheng Zhang, Fuzheng Gao

Journal of Materials Research and Technology

DOI

2019

Evolution of grain structure, micro-texture and second phase during porthole die extrusion of Al–Zn–Mg alloy

Liang Chen, Gaojin Chen, Jianwei Tang, Guoqun Zhao, Cunsheng Zhang

Materials Characterization

DOI

2019

Investigation on microstructure and mechanical properties of Al–5.50Zn–2.35Mg–1.36Cu alloy fabricated by hot extrusion process

Liang Chen, Yuqiang Li, Jianwei Tang, Guoqun Zhao, Cunsheng Zhang

Journal of materials research/Pratt's guide to venture capital sources

DOI

2019

Microstructure evolution and mechanical properties of 2196 Al-Li alloy in hot extrusion process

Xiaoxue Chen, Guoqun Zhao, Guoliang Liu, Lu Sun, Liang Chen, Cunsheng Zhang

Journal of Materials Processing Technology

DOI

2019

Effect of inter-annealing between two stages of extrusion on the microstructure and mechanical property for spray deposited Al–Cu–Li alloy 2195

Yongxiao Wang, Guoqun Zhao, Xiaoxue Chen, Xiao Ling Xu, Liang Chen, Cunsheng Zhang

Journal of Materials Research and Technology

DOI

2019

Influence of aging treatment on the microstructure, mechanical properties and anisotropy of hot extruded Al-Mg-Si plate

Liang Chen, Shengwei Yuan, Demin Kong, Guoqun Zhao, Yuying He, Cunsheng Zhang

Materials & Design

DOI

2019

The integration of through-thickness normal stress and friction stress in the M-K model to improve the accuracy of predicted FLCs

Yubao Wang, Cunsheng Zhang, Ying Yuan Yang, Shuming Fan, Guangchun Wang, Guoqun Zhao, Liang Chen

International Journal of Plasticity

DOI

2019

Correlation between homogenization treatment and subsequent hot extrusion of Al–Mg–Si alloy

Shengwei Yuan, Liang Chen, Jianwei Tang, Guoqun Zhao, Cunsheng Zhang, Junquan Yu

Journal of Materials Science

DOI

2019

Microstructure, mechanical properties and welding quality evaluation of longitudinal welds in hollow magnesium alloy profiles extruded at different ram speeds

Xing Lu, Guoqun Zhao, Huakun Xi, Cunsheng Zhang, Liang Chen, Lu Sun

Materials Characterization

DOI

2019

Influence of extrusion parameters on microstructure, texture, and second-phase particles in an Al-Mg-Si alloy

Cunsheng Zhang, Cuixue Wang, Qingyou Zhang, Guoqun Zhao, Liang Chen

Journal of Materials Processing Technology

DOI

2019

Microstructure and mechanical properties of hot extruded Mg-8.89Li-0.96Zn alloy

Shuoshuo Li, Liang Chen, Jianwei Tang, Guoqun Zhao, Cunsheng Zhang

Results in Physics

DOI

2019

Grain refinement and strength enhancing of hot extruded Mg alloy by application of electric pulse

Liang Chen, Shuoshuo Li, Xingrong Chu, Guoqun Zhao, Jun Gao

Materials Letters

DOI

2019

Study on Al/Mg/Al sheet fabricated by combination of porthole die co-extrusion and subsequent hot rolling

Jianwei Tang, Liang Chen, Guoqun Zhao, Cunsheng Zhang, Junquan Yu

Journal of Alloys and Compounds

DOI

2018

LZ91 Mg-Li合金分流模挤压成形过程数值模拟与实验研究

陈良，赵国群，陈高进，梁赵青，张存生

《金属学报》

2018

铝合金型材分流模挤压过程焊合行为的研究进展

赵国群，陈良，喻俊荃

《锻压技术》

DOI

2018

20CrMnTi高温流变行为和本构关系的描述（英文）

赵新海，刘丹丹，吴向红，刘广荣，陈良

Journal of Central South University

2018

Modelling of constitutive relationship, dynamic recrystallization and grain size of 40Cr steel during hot deformation process

Liang Chen, Weiyan Sun, Jun Lin, Guoqun Zhao, Guangchun Wang

Results in Physics

DOI

2018

Microstructures of longitudinal/transverse welds and back-end defects and their influences on the corrosion resistance and mechanical properties of aluminum alloy extrusion profiles

Junquan Yu, Guoqun Zhao, Xingting Zhao, Liang Chen, Mengmeng Chen

Journal of Materials Processing Technology

DOI

2018

One-time determination of 20 material parameters in a strain-compensated constitutive model and its application in extrusion for an Al-Zn-Mg thin-walled profile

Cunsheng Zhang, Mingyue Wen, Guoqun Zhao, Liang Chen, Wenchao Sun, Kai Bai

Thin-Walled Structures

DOI

2018

Microstructure analysis and low-cycle fatigue behavior of spray-formed Al–Li alloy 2195 extruded plate

Qingyou Zhang, Cunsheng Zhang, Jun Lin, Guoqun Zhao, Liang Chen, Hao Zhang

Materials Science and Engineering A

DOI

2018

Investigation of dynamic recrystallization and modeling of microstructure evolution of an Al-Mg-Si aluminum alloy during high-temperature deformation

Cunsheng Zhang, Cuixue Wang, Ran Guo, Guoqun Zhao, Liang Chen, Wenchao Sun, Xiebin Wang

Journal of Alloys and Compounds

DOI

2018

Co-extrusion of dissimilar AA6063/AA7075 by porthole die at various temperatures

Jianwei Tang, Liang Chen, Xiangkun Fan, Guoqun Zhao, Cunsheng Zhang

Journal of Alloys and Compounds

DOI

2018

Microstructure and texture evolution during porthole die extrusion of Mg-Al-Zn alloy

Liang Chen, Jixiao Zhang, Jianwei Tang, Gaojin Chen, Guoqun Zhao, Cunsheng Zhang

Journal of Materials Processing Technology

DOI

2018

Flow behavior and constitutive description of 20CrMnTi steel at high temperature

Xinhai Zhao, Dandan Liu, Xiànghóng Wú, Guangrong Liu, Liang Chen

Journal of Central South University

DOI

2018

Effects of asymmetric feeder on microstructure and mechanical properties of high strength Al-Zn-Mg alloy by hot extrusion

Yuqiang Li, Liang Chen, Jianwei Tang, Guoqun Zhao, Cunsheng Zhang

Journal of Alloys and Compounds

DOI

2018

Microstructure evolution of AZ91 alloy during hot extrusion process with various ram velocity

Liang Chen, Mengchao Liang, Guoqun Zhao, Jixue Zhou, Cunsheng Zhang

Vacuum

DOI

2018

Microstructure and mechanical properties of Mg-Al-Zn alloy extruded by porthole die with different initial billets

Liang Chen, Jixiao Zhang, Guoqun Zhao, Zongshen Wang, Cunsheng Zhang

Materials Science and Engineering A

DOI

2017

三柱槽壳反挤压变形规律及提高反挤端面平齐度的凸模结构设计

孙晓燕，张太良，张扣宝，陈良，王广春，赵国群

《锻压技术》

2017

蓄能器外壳温冷复合挤压预成形设计

刘亚男，张太良，韩娟娟，张扣宝，陈良，王广春，赵国群

《精密成形工程》

2017

Microstructure and mechanical properties of Mg-3.0Zn-1.0Sn-0.3Mn-0.3Ca alloy extruded at different temperatures

Xing Lu, Guoqun Zhao, Jixue Zhou, Cunsheng Zhang, Liang Chen, Shouqiu Tang

Journal of Alloys and Compounds

DOI

2017

Hot deformation behavior and microstructure analysis of 25Cr3Mo3NiNb steel during hot compression tests

Le Xu, Liang Chen, Gaojin Chen, Maoqiu Wang

Vacuum

DOI

2017

Microstructure evolution during solution treatment of extruded Al-Zn-Mg profile containing a longitudinal weld seam

Gaojin Chen, Liang Chen, Guoqun Zhao, Cunsheng Zhang

Journal of Alloys and Compounds

DOI

2017

Joining of 1060/6063 aluminum alloys based on porthole die extrusion process

Xiangkun Fan, Liang Chen, Gaojin Chen, Guoqun Zhao, Cunsheng Zhang

Journal of Materials Processing Technology

DOI

2017

Study on solid bonding behavior of AZ31 Mg alloy during porthole die extrusion process

Jixiao Zhang, Liang Chen, Guoqun Zhao, Cunsheng Zhang, Jixue Zhou

The International Journal of Advanced Manufacturing Technology

DOI

2017

Microstructure analysis of an Al-Zn-Mg alloy during porthole die extrusion based on modeling of constitutive equation and dynamic recrystallization

Gaojin Chen, Liang Chen, Guoqun Zhao, Cunsheng Zhang, Weichao Cui

Journal of Alloys and Compounds

DOI

2017

Experimental and numerical investigations on transverse weld of hollow aluminum profile during porthole extrusion process

Cunsheng Zhang, Yuanyuan Dong, Guoqun Zhao, Liang Chen

Procedia Engineering

DOI

2016

Dynamic evolution of grain structure and micro-texture along a welding path of aluminum alloy profiles extruded by porthole dies

Junquan Yu, Guoqun Zhao, Cunsheng Zhang, Liang Chen

Materials Science and Engineering A

DOI

2016

Analysis of longitudinal weld seam defects and investigation of solid-state bonding criteria in porthole die extrusion process of aluminum alloy profiles

Junquan Yu, Guoqun Zhao, Liang Chen

Journal of Materials Processing Technology

DOI

2015

Analysis of retarding effect on α to γ transformation in Fe–C alloy by addition of dispersed particles

Liang Chen, Yun Soon Han, Bin Zhou, Jie Gong

Progress in Natural Science Materials International

DOI

2015

Evaluation of a pyramid die extrusion for a hollow aluminum profile using FE simulation

Liang Chen, Guoqun Zhao, Junquan Yu, Wendong Zhang

Journal of Mechanical Science and Technology

DOI

2015

Effects of ram velocity on pyramid die extrusion of hollow aluminum profile

Liang Chen, Guoqun Zhao, Junquan Yu

The International Journal of Advanced Manufacturing Technology

DOI

2015

Hot deformation behavior and constitutive modeling of homogenized 6026 aluminum alloy

Liang Chen, Guoqun Zhao, Junquan Yu

Materials & Design (1980-2015)

DOI

2015

Investigation of interface evolution, microstructure and mechanical properties of solid-state bonding seams in hot extrusion process of aluminum alloy profiles

Junquan Yu, Guoqun Zhao, Liang Chen

Journal of Materials Processing Technology

DOI

2015

Erratum to “State-of-the-art of extrusion welding and proposal of a method to evaluate quantitatively welding quality during three-dimensional extrusion process” [Mater. Des. 89 (2015) 737–48]

Xing Lu, Cunsheng Zhang, Guoqun Zhao, Yanjin Guan, Liang Chen, Anjiang Gao

Materials & Design

DOI

2015

Hot Deformation Behaviors and Processing Maps of 2024 Aluminum Alloy in As-cast and Homogenized States

Liang Chen, Guoqun Zhao, Jie Gong, Xiaoxue Chen, Mengmeng Chen

Journal of Materials Engineering and Performance

DOI

2015

Effects of preheat treatment on microstructure evolution and properties of brazed-fusion welded joint of aluminum alloy to steel

Hong Ma, Guoliang Qin, Liyuan Wang, Xiangmeng Meng, Liang Chen

Materials & Design

DOI

2014

Effects of Process Parameters on Charge Weld Length during Multi-Hole Porthole Die Extrusion

Liang Chen, Guo Qun Zhao, Ting Ting Wang

Applied Mechanics and Materials

DOI

2014

Constitutive analysis of homogenized 7005 aluminum alloy at evaluated temperature for extrusion process

Liang Chen, Guoqun Zhao, Junquan Yu, Wendong Zhang

Materials & Design (1980-2015)

DOI

2009

Heat Response Simulation of Variotherm Injection Molding and Optimization of Mold Structure

Liang Chen

精选作品

期刊论文

Deformation behavior and failure mechanism under nonlinear continuous deformation path: an experimental and modeling study

Unraveling nano-scale interfacial structure and strengthening mechanism of Al-TiB2/Mg laminate through quasi-in-situ observation

Achieving breakthrough high strength in AZ31 magnesium alloy bar via a novel single-pass extrusion process

A strategy for mitigating mechanical anisotropy of GWZ932 Mg alloy via cryogenic-annealing cyclic treatment

Effect of Sc addition on microstructural homogeneity and mechanical properties of an ultra-high strength Al-Zn-Mg-Cu alloy

Corrigendum to “Strain-induced dynamic evolution of the T1 phase and its influence on recrystallization behavior” [Acta Materialia 308 (2026) 122032]

Achieving superior strength-ductility synergy of GNP/2024Al composites via a highly efficient two-step aging process tailoring Cu atom distribution

Enhancing performance via heterostructure in continuously extruded NiTi-reinforced Al matrix composites

Mechanical degradation and corrosion behavior of low-frequency vibration assisted riveted CFRP/Al joints

Interfacial microstructure and dynamic recrystallization in metallurgically bonded Al/Mg laminate fabricated by vacuum hot compression bonding

Heterogeneous abnormal grain growth behaviors and corresponding deformation mechanisms of Mg alloy profile investigated through in-situ and quasi-in-situ characterizations

Dislocation-graphene interactions and strengthening mechanisms in aluminum matrix composites: From Orowan mechanism to cross-slip

Tailoring dual heterointerface structure in continuously extruded Al/steel/CF hybrid composites: Towards enhanced interfacial bonding performance

热压烧结制备铝/铜多层复合材料的界面结构与力学性能（英文）

新型高强韧7A99铝合金反挤压工艺的数值模拟与实验研究

铝合金吸能梁用型材的挤压模拟及性能研究

Low-energy forest dislocation in dual-heterostructured CNT/2024Al composites and its effect on mechanical properties

Atomic-Scale mechanisms of Lithium-Induced grain boundary embrittlement in aluminum alloys: A First-Principles study

Abnormal grain growth mechanism and inhibiting strategy by a tailored two-step solution treatment of ZK60 Mg alloy

Design and optimization of cruciform tension and shear specimen for forming limit acquisition

Enhanced strength-ductility synergy of Mg/Al laminate by coordinating the strain gradient of constituting layers

Interfacial bonding mechanism in Al/Ti dissimilar friction stir welding

Microscopic strengthening and failure mechanisms of graphene/Al composite: A molecular dynamics study

Atomic strain concentration induced by interfaces in extruded carbon nanotube reinforced 2024Al matrix composite

Enhancing strength and ductility of extruded Ti-alloy-reinforced Al-Mg-Si composites: Roles of interface nanostructures and chemical bonding

Achieving the strength-ductility synergy in ultra-fined grained CNT/2024Al composites via a low-temperature aging strategy

Fabrication of TiB2/6061Al composite with tailoring heterostructure and superior mechanical properties and investigation on deformation behaviors

Nanoscale analysis of interfacial structure and its effects on mechanical properties of Mg/Al laminate reinforced by TiB2 particles

Microstructure characterization and solid welding mechanism of TiB2/6061Al composite profile fabricated by porthole die extrusion

An insight into the interfacial structure and mechanical properties of Al/Cu laminate fabricated through cold spraying and post-treatment

Tailoring interfacial structure and achieving excellent strength-ductility synergy of Al/Mg/Al composite via porthole die co-extrusion and post-annealing

Dynamic evolution of the T1 phase and its effect on continuous dynamic recrystallization in Al–Cu–Li alloys

Effects of a hybrid post-treatment on microstructure and mechanical properties of cold sprayed AA7050 deposits

Novel interface characteristics and strengthening mechanisms in extruded fiber(Ti)-reinforced Al-based composites

固溶时效处理Mg-Zn-Al-Sn-Mn合金的微观组织演变及腐蚀行为研究（英文）

复合预轧制与回归再时效平衡7A99铝合金的强度和耐蚀性（英文）

Fabrication of Al/Al-TiB2 laminate composites via hot press sintering process: An insight into the mechanical properties and fracture behavior

Re-dissolution behavior of secondary phases and mechanical response of CNT/2024Al composites

Enhanced strength-ductility synergy of Al/Zn/Al laminated composite with unique interface and multi-modal heterogeneous microstructure

Hot compressive deformation behavior and microstructural evolution of the spray-formed 1420 Al–Li alloy

The formation mechanisms and mechanical effects of lattice defects in carbon nanotube reinforced 2024Al composite

Effects of multi-directional forging on the microstructure and mechanical properties of TiB2 particulate reinforced 6061Al composite

Investigation on corrosion behaviors of Mg-Zn-Al-Sn-Mn alloy treated by solution and artificial aging

Strategy for suppressing abnormal grain growth of ZK60 Mg alloy during solution by pre-compression: A quasi-in-situ study

Strengthening and toughening mechanisms of tailored Al/Al-TiB2 laminated composites fabricated by hot press sintering process

Micro-/nano-scale structure and elemental diffusion in the Al/Ti/Al sandwich structure

Deformation mechanism of as-extruded Al–Cu–Li alloy with heterogeneous fiber structure

Suppressing abnormal grain growth and switching precipitation behaviors in ZK60 Mg profile by inducing pre-tension

Micro-/nano-scale interface structure and mechanical characteristics of the Al/Ti composite bar produced by a novel continuously-extruded technique

Investigation on corrosion behaviors and mechanical properties of TiB2/7075Al composites with various particle contents

科教融合建设挤压成形虚拟仿真“金课”的探索与实践

大型带筋薄壁圆管铝型材挤压成形数值模拟

基于试验设计和响应曲面法的大型带筋薄壁铝型材挤压工艺优化

Coupled crystal plasticity and micromechanics damage model based on viscoplastic self-consistent theory and X-ray computed tomography

Forming limit analysis of AA5052 sheet under bilinear strain path by designing a novel large-scale gripping fixture

Experimental study on tensile deformation behaviors under room and elevated temperatures induced by microstructure inhomogeneity of ZK60 Mg with a longitudinal weld

Mechanical properties and microstructural evolution of the spray formed 2195 Al–Li alloy extruded sheet at warm temperatures

Precipitation behavior and its effect on the dynamic recrystallization of a novel extruded Al-Cu-Li alloy

Investigation on microstructure and mechanical properties of hot-rolled AZ31 Mg alloy with various cryogenic treatments

Fabrication and strengthening mechanism of dual-phased and bimodal-sized (Si3N4p + TiB2p)/6061Al hybrid composite

Effects of artificial aging on precipitation behavior, mechanical properties and corrosion resistance of Si3N4/6061Al composite fabricated by sintering and hot extrusion processes

Effects of TiB2 particle and local aspect ratio on microstructure and mechanical properties of an I-shaped TiB2/6061Al composite profile

First-principles study of substitutional solute and carbon interactions in tungsten

Aging precipitation and its effects on mechanical properties of TiB2 particulate reinforced 7075Al composite

Interfacial microstructure evolution and mechanical properties of inertia friction welded aluminium alloy/stainless steel joint with preheat treatment

Investigation on corrosion behavior and mechanical properties of an extruded Mg-Zn-Al-Sn-Mn alloy

Enhancing mechanical properties and corrosion resistance of a high strength 7A99 Al alloy by introducing pre-rolling in solution and aging treatments

Atomic diffusion mechanism and interface nanomechanics in the Al/Ti composite structures

Effects of annealing treatment on the microstructure and corrosion behavior of hot rolled AZ31 Mg alloy

Evolution mechanisms of charge weld during porthole die extrusion of ZK60 Mg profile

Microstructure characterization and corrosion behavior of hollow ZK60 Mg profile containing longitudinal welds

TiAl3 nucleation mechanism and atomic-scale interface features in the Al/Ti composite structures

Deformation behavior and microstructure in the low-frequency vibration upsetting of titanium alloy

Investigation on peripheral coarse grains and precipitation behavior of in-situ TiB2/Al–Cu–Mg composites with various Mg contents

Numerical and experimental study on extrusion of ZK60 Mg alloy using billet with temperature gradient

An Investigation on the Anisotropic Plastic Behavior and Forming Limits of an Al-Mg-Li Alloy Sheet

Microstructure evolution of AZ31B sheet deformed by electric hot temperature-controlled single point incremental forming

Effects of single- and multi-stage solid solution treatments on microstructure and properties of as-extruded AA7055 helical profile