沈平

2026

材料挤出增材制造Ni-Mn-Sn-Co合金显微组织及马氏体相变特性

《材料工程》

2026

非调质钢连铸过程中水口堵塞的原因及预防措施

《上海金属》

2026

Development of high-performance multi-scale Al/Al2O3 composites with hierarchical architectures via 3D printing coupled with ice-templating

Composites. Part A, Applied science and manufacturing

DOI

2026

Densification pathways in cold sintering of ceramics: A comprehensive review

Journal of the European Ceramic Society

DOI

2026

Architectural control of strength and toughness in interpenetrating Cu/Cr3C2 composites via direct ink writing and melt infiltration

Engineering Failure Analysis

DOI

2026

Phase Formation and Densification in Ultrafast High‐Temperature Sintering of Multi‐Principal‐Element Carbides

Journal of The American Ceramic Society

DOI

2026

High‐Temperature Wetting and Interfacial Evolution of Multicomponent Transition‐Metal Solid‐Solution Carbides by Ni Melt

Journal of The American Ceramic Society

DOI

2026

Overcoming mass-transfer bottlenecks in thick electrodes via in-situ growth of high-entropy sulfides on 3D freeze-printed nickel frameworks

Chemical Engineering Journal

DOI

2026

A biomimetic gradient multiscale Ti/HA scaffold reconcile load-bearing mechanics and multifunctionality: An in vitro proof-of-concept

Journal of Material Science and Technology

DOI

2026

Biomimetic radial gradient titanium scaffolds via freeze-assisted direct ink writing: Hierarchical architecture and damage tolerance

Transactions of Materials Research

DOI

2026

Regulating microstructure and quasi-static/dynamic failure in architected AZ51/Al2O3 composites via topology–interface synergy

Materials Science and Engineering A

DOI

2025

镁处理对厚板钢中夹杂物的改质效果探究

《冶金分析》

DOI

2025

Accelerated discovery and processing of high-entropy carbides by ultrafast pressure sintering

Ceramics International

DOI

2025

Camphene-based metallic ink for 3D-printed medical implants: Effect of hierarchical porous structure on mechanical and biological properties

Journal of Materials Science & Technology

DOI

2025

Ultrafast high-temperature sintering: Principles, advantages, and applications

Journal of the European Ceramic Society

DOI

2025

Anisotropy and damage tolerance in zigzag-structured Al/Al2O3 composites fabricated via 3D printing and pressure infiltration

Ceramics International

DOI

2025

Ultrafast sintering of multi-component transition metal carbonitrides: Effect of compositional complexity on phase stability, densification and mechanical properties

Journal of Alloys and Compounds

DOI

2025

Compositionally gradient Al2O3–B4C/Al composites with interpenetrating structure and tailored properties via material extrusion-based additive manufacturing and pressure infiltration

Virtual and Physical Prototyping

DOI

2025

Ultrafast pressure sintering: A one-step route to dense high-entropy carbide from precursors

Journal of the European Ceramic Society

DOI

2025

Lamella-structured elastomer/ceramic composites with high flexibility and improved puncture-resistance

Composites Communications

DOI

2025

Bio-inspired gradient-heterogeneous Al/Al2O3 composites: Strength–toughness synergistic design and fracture mechanisms

Composites Part A Applied Science and Manufacturing

DOI

2025

Achieving synergistic strength and toughness in Al/SiC composites: A controlled comparison of bioinspired laminated versus uniform architectures

Materials Science and Engineering A

DOI

2025

3D printed reciprocal architectures for enhanced strength–toughness synergy in Al/Al2O3 composites

Materials Science and Engineering A

DOI

2025

Bioinspired design of silicon carbide–aluminum composites with tunable brick‐mortar structures via three‐dimensional printing and pressure infiltration

Journal of the American Ceramic Society

DOI

2025

Constructing bioinspired graded metal/ceramic composites through sedimentation-assisted freeze casting and pressure infiltration

Journal of Materials Research and Technology

DOI

2025

Wetting behavior and interfacial structure of multicomponent aluminum alloys on boron carbide

Journal of Alloys and Compounds

DOI

2024

Cr12MoV钢铸坯夹杂物及碳化物解析

《钢铁钒钛》

2024

镁处理对Q690D钢中夹杂物的改质调控探究

《冶金分析》

2024

S355J2W(H)钢镁处理洁净度及生产问题解析

《冶金分析》

2024

Dual-gradient ceramic/aluminum composite structure fabricated by arc additive manufacturing with co-conveying of wire and powder

Materials Research Letters

DOI

2024

Design and manufacture of near-net-shape metal-ceramic composites with gradient-layered structure and optimized damage tolerance

Additive Manufacturing

DOI

2024

3D printing and near-net shaping of laminated Cr3C2/Cu composites: Enhanced strength, toughness, and anisotropy

Composites Part B Engineering

DOI

2024

Wettability and interfacial reactions in Al–Mg–Si/SiC and Al–Mg–Si/SiO2 systems

Materials Characterization

DOI

2024

Fabrication and characterization of SiC-reinforced magnesium-matrix composites with honeycomb structures and anisotropic properties

Ceramics International

DOI

2024

Centrifugal directional freezing and pressure infiltration: Tailoring gradient structures and mechanical properties in Al/B4C composites

Materials Science and Engineering A

DOI

2024

Flash joining of (La0.2Nd0.2Sm0.2Gd0.2Yb0.2)2Zr2O7 high-entropy ceramic to 3YSZ

Ceramics International

DOI

2024

Bone-inspired AZ31/HA composites with gradient structures and properties for implant applications

Journal of Materials Research and Technology

DOI

2024

Ultrafast pressure sintering of B4C-based composites via direct Joule heating

Journal of Material Science and Technology

DOI

2024

Efficient synthesis and densification of MgAl2O4 ceramics: Combining reactive cold sintering with ultrafast high-temperature sintering

Journal of the European Ceramic Society

DOI

2023

Tunable architectures in Al/Al2O3 composites for enhanced damage tolerance using zirconium acetate-mediated ice-templating

Materials & Design

DOI

2023

Influence of Si, Ti, and Cu as alloying elements on the wettability and reactivity of an Al/B4C system

Journal of Materials Research and Technology

DOI

2023

Ultrafast synthesis and pressureless densification of multicomponent nitride and carbonitride ceramics

Ceramics International

DOI

2023

Preparation and characterization of porcupine-fish-spine-inspired AZ91/SiC composites with radial lamellar structures

Materials Science and Engineering A

DOI

2023

Ultra-fast high-temperature synthesis and densification of high-entropy diborides and diboride-carbide ceramics

Journal of the European Ceramic Society

DOI

2023

Cr3C2 assisted ultrafast high-temperature sintering of TiC

Journal of the European Ceramic Society

DOI

2023

Electrically driven wetting of high-entropy (Zr1/3Hf1/3Ce1/3)1-(Y1/2Gd1/2) O2-δ ceramics by molten Cu

Scripta Materialia

DOI

2023

Preparation of laminated Al/B4C composites with gradient structures and properties through centrifugal freezing and pressure infiltration

Ceramics International

DOI

2022

Development of a nacre-like metal-ceramic composite with a brick-and-mortar structure and high ceramic content

Composites Part A Applied Science and Manufacturing

DOI

2022

Near-net shaping of laminated Al/Al2O3 composites by direct ink writing and pressure infiltration

Materials Science and Engineering A

DOI

2022

Synthesis and densification of BaZrO3 ceramics by reactive cold sintering of Ba(OH)2⋅8H2O-Zr(OH)4 powders

Journal of the European Ceramic Society

DOI

2022

Densification of oxides via cold sintering of hydrate precursors

Journal of the European Ceramic Society

DOI

2022

Preparation of laminated Cr3C2/Cu composites by direct ink writing and pressureless infiltration

Additive manufacturing

DOI

2022

On the current percolation-induced hot-spot issue during flash sintering: The case of 8 mol% yttria-stabilized zirconia and Gd2Zr2O7 composites

Open Ceramics

DOI

2022

Ultrafast high-temperature sintering of lanthanum-chromite-based ceramics

Journal of the European Ceramic Society

DOI

2022

Inhibition of hotspot formation by alumina addition in flash sintering of (La0.2Nd0.2Sm0.2Eu0.2Gd0.2)2Zr2O7 high-entropy ceramic

Journal of the European Ceramic Society

DOI

2022

Cold sintering of ceria-based solid electrolyte with the assistance of a core-shell structure

Scripta Materialia

DOI

2022

Lamellar and interpenetrated Al/(Al2O3–TiC) composites prepared by bidirectional freeze casting and melt infiltration

Ceramics International

DOI

2022

DC‐driven ultrafast transient liquid phase bonding of 3YSZ and GH3128 superalloy using Ni interlayer

Journal of the American Ceramic Society

DOI

2022

Ultrafast high-temperature synthesis and densification of high-entropy carbides

Journal of the European Ceramic Society

DOI

2022

One-step synthesis and densification of BaTiO3 by reactive cold sintering

Scripta Materialia

DOI

2022

Wire–powder–arc additive manufacturing: A viable strategy to fabricate carbide ceramic/aluminum alloy multi-material structures

Additive manufacturing

DOI

2021

Cold sintering of chitosan/hydroxyapatite composites

Materialia

DOI

2021

Electrochemical wetting of 3YSZ by Cu and ultrafast joining with a Ni-based superalloy

Journal of the European Ceramic Society

DOI

2021

Flash joining of 3YSZ and 430 SS using Ag–CuO filler

Ceramics International

DOI

2021

Pulsed current-driven wetting of 3YSZ by liquid Cu and its mechanisms

Journal of the European Ceramic Society

DOI

2021

Surface hydrate-assisted low- and medium-temperature sintering of MgO

Scripta Materialia

DOI

2021

Ultrafast and robust joining of 3YSZ and GH3128 superalloy using Cu interlayer under an electric field

Journal of Alloys and Compounds

DOI

2021

Reactive wetting of high-entropy (La0.2Nd0.2Sm0.2Eu0.2Gd0.2)2Zr2O7 ceramic by molten 71Ag–27Cu–2Ti alloy at 1073–1273 K

Journal of the European Ceramic Society

DOI

2021

Effect of components on the microstructures and properties of rare-earth zirconate ceramics prepared by ultrafast high-throughput sintering

Journal of the European Ceramic Society

DOI

2021

Construction of nacre-mimetic composites with a “brick-and-mortar” architecture based on structural defects in ice-templating

Materials & Design

DOI

2021

Influences of Si and Ti on the wettability and reactivity of Al/graphite system at 900 °C

Materialia

DOI

2021

Hydrated precursor-assisted densification of hydroxyapatite and its composites by cold sintering

Ceramics International

DOI

2021

Synthesis and densification of hydroxyapatite by mechanochemically-activated reactive cold sintering

Scripta Materialia

DOI

2020

Bio-inspired lamellar hydroxyapatite/magnesium composites prepared by directional freezing and pressureless infiltration

Ceramics International

DOI

2020

Ultrafast densification of high-entropy oxide (La0.2Nd0.2Sm0.2Eu0.2Gd0.2)2Zr2O7 by reactive flash sintering

Journal of the European Ceramic Society

DOI

2020

Wettability and reactivity between molten aluminum and randomly aligned carbon nanotubes

Journal of Materials Science

DOI

2020

Influence of Grain Refiners on the Wettability of Al2O3 Substrate by Aluminum Melt

Metallurgical and Materials Transactions B

DOI

2020

Ultrafast high-temperature sintering of bulk oxides

Scripta Materialia

DOI

2020

Role of Si in the wetting of TiC by Al

Journal of Materials Science

DOI

2020

Exploiting bio-inspired high energy-absorbent metal/ceramic composites through emulsion-ice-templating and melt infiltration

Materialia

DOI

2020

Cold sintering of NaNO3/MgO heat-storage composite

Ceramics International

DOI

2020

Synthesis of damage-tolerant Cu-matrix composites with nacre-inspired laminate-reticular hierarchical architecture via tuning compositional wettability

Scripta Materialia

DOI

2020

Electrochemically driven rapid wetting of 3YSZ by 60Cu–40Ag and its robust joining to 304 stainless steel

Journal of the European Ceramic Society

DOI

2020

Preparation and characterization of high damage-tolerance nacre-inspired magnesium alloy matrix composites with high carbon nanotube contents

Carbon

DOI

2020

Influence of matrix property and interfacial reaction on the mechanical performance and fracture mechanism of TiC reinforced Al matrix lamellar composites

Materials Science and Engineering A

DOI

2020

Flash Sintering of 3YSZ and In-Situ Joining with 304 Stainless Steel Using Copper as an Interlayer

Scripta Materialia

DOI

2019

综述:SiC/Al界面反应与界面结构演变规律及机制

《金属学报》

2019

Role of ion substitution and lattice water in the densification of cold-sintered hydroxyapatite

Scripta Materialia

DOI

2019

The influence of surface orientation on the wetting and reaction at the Al/MgAl2O4 interfaces

Ceramics International

DOI

2019

Roles of direct current in ultrafast wetting of 3YSZ by Sn3.0Ag0.5Cu and joining to Ni

Materialia

DOI

2019

A novel strategy for fabricating biomimetic gradient metal-ceramic composites by dynamic freeze casting and pressure infiltration

Scripta Materialia

DOI

2019

Microstructures and mechanical characterizations of high-performance nacre-inspired Al/Al2O3 composites

Composites Part A Applied Science and Manufacturing

DOI

2019

A novel approach to the fabrication of lamellar Al2O3/6061Al composites with high-volume fractions of hard phases

Materials Science and Engineering A

DOI

2019

Developing high-performance laminated Cu/TiC composites through melt infiltration of Ni-doped freeze-cast preforms

Ceramics International

DOI

2019

Optimization of the properties in Al/SiC composites by tailoring microstructure through gelatin freeze casting

Materials Science and Engineering A

DOI

2019

DC-assisted rapid wetting of 3Y-PSZ by molten 72Ag–28Cu and its application in joining

Journal of the European Ceramic Society

DOI

2019

Roles of alloying elements in wetting of SiC by Al

Journal of Alloys and Compounds

DOI

2018

钢铁冶金过程中的界面润湿性的基础

《工程科学学报》

2018

Fabrication and characterization of robust freeze-cast alumina scaffolds with dense ceramic walls and controllable pore sizes

Journal of Materials Science

DOI

2018

Effect of freeze speed on the microstructure and damage-tolerance behavior of bio-inspired ZL205A/silicon carbide composites

Materials Characterization

DOI

2018

Al–7Si–5Cu/Al2O3–ZrO2 Laminated Composites with Excellent and Anisotropic Wear Resistance

Advanced Engineering Materials

DOI

2018

Nacre-inspired lightweight and high-strength AZ91D/Mg2B2O5w composites prepared by ice templating and pressureless infiltration

Journal of Materials Science

DOI

2018

The role of TiO2 incorporation in the preparation of B4C/Al laminated composites with high strength and toughness

Ceramics International

DOI

2018

Effects of ceramic lamellae compactness and interfacial reaction on the mechanical properties of nacre-inspired Al/Al2O3–ZrO2 composites

Materials Science and Engineering A

DOI

2018

Formation mechanism and control of a large-scale lamellar structure in freeze-cast Al 2 O 3 ceramics under dual temperature gradients

Journal of the European Ceramic Society

DOI

2018

Current-driven spontaneous infiltration of molten Al into a porous PSZ preform with a lamellar structure

Materials Letters

DOI

2017

3D long-range ordered porous ceramics prepared by a novel bidirectional freeze-casting technique

Ceramics International

DOI

2017

Polarity effects on the wettability and interfacial chemistry at Cu–YSZ interface by applying a direct current

Journal of the European Ceramic Society

DOI

2017

High damage-tolerance bio-inspired ZL205A/SiC composites with a lamellar-interpenetrated structure

Materials Science and Engineering A

DOI

2017

Electrochemically-driven direct joining of Ni and ZrO2

Scripta Materialia

DOI

2017

High compressive strength in nacre-inspired Al−7Si−5Cu/Al 2 O 3 –ZrO 2 composites at room and elevated temperatures by regulating interfacial reaction

Ceramics International

DOI

2016

LF精炼渣对镁碳质基片的润湿性和渗透性

《钢铁》

2016

On the Role of Interfacial Reaction in the Wetting in Metallic Systems

DOI

2016

Developing high toughness and strength Al/TiC composites using ice-templating and pressure infiltration

Ceramics International

DOI

2016

Lamellar-interpenetrated Al−Si−Mg/Al2O3−ZrO2 composites prepared by freeze casting and pressureless infiltration

Ceramics International

DOI

2016

Significant improvement in the wettability of ZrO2 by molten Al under the application of a direct current

Materials & Design

DOI

2016

Preparation of nacre-like composites by reactive infiltration of a magnesium alloy into porous silicon carbide derived from ice template

Materials Letters

DOI

2016

Processing and mechanical properties of lamellar-structured Al–7Si–5Cu/TiC composites

Materials & Design

DOI

2016

Reactive wetting of amorphous silica by molten Al–Mg alloys and their interfacial structures

Applied Surface Science

DOI

2016

Effects of oxide addition on the microstructure and mechanical properties of lamellar SiC scaffolds and Al–Si–Mg/SiC composites prepared by freeze casting and pressureless infiltration

Ceramics International

DOI

2015

The role of CuO–TiO2 additives in the preparation of high-strength porous alumina scaffolds using directional freeze casting

Journal of Porous Materials

DOI

2015

Effects of Ti-coating layer on the distribution of SiCP in the SiCP/2014Al composites

Materials & Design

DOI

2015

Influence of SiC surface polarity on the wettability and reactivity in an Al/SiC system

Applied Surface Science

DOI

2015

Effects of composition and sintering temperature on the structure and compressive property of the lamellar Al2O3–ZrO2 scaffolds prepared by freeze casting

Journal of Materials Science

DOI

2015

Lamellar-interpenetrated Al–Si–Mg/SiC composites fabricated by freeze casting and pressureless infiltration

Materials Science and Engineering A

DOI

2014

Influences of electric current on the wettability and interfacial microstructure in Sn/Fe system

Applied Surface Science

DOI

2014

Preparation of High-Strength Al–Mg–Si/Al2O3 Composites with Lamellar Structures Using Freeze Casting and Pressureless Infiltration Techniques

Acta Metallurgica Sinica (English Letters)

DOI

2014

Wetting of polycrystalline SiC by molten Al and Al−Si alloys

Applied Surface Science

DOI

2013

Effects of direct current on the wetting behavior and interfacial morphology between molten Sn and Cu substrate

Journal of Alloys and Compounds

DOI

2013

Wetting and adhesion at Mg/MgO interfaces

Journal of Materials Science

DOI

2013

Reactive wetting in liquid magnesium/silica and magnesium/silicon systems

Applied Surface Science

DOI

2012

Wetting and reaction of molten La with poly- and mono-crystalline MgO at 1323 K

Journal of Materials Science

DOI

2012

Wetting of (0001) α-alumina single crystals by molten Mg–Al alloys in the presence of evaporation

Journal of Materials Science

DOI

2012

A Common Regularity of Stoichiometry-Induced Morphology Evolution of Transition Metal Carbides, Nitrides, and Diborides during Self-Propagating High-Temperature Synthesis

Crystal Growth & Design

DOI

2012

Synthesis of spherical NbB2−x particles by controlling the stoichiometry

CrystEngComm

DOI

2011

Zr含量对Mg-Zr粉末冶金阻尼合金材料性能的影响

《航空材料学报》

2011

球磨工艺参数对Mg-1.5Zr合金阻尼性能的影响

《粉末冶金材料科学与工程》

2011

The mechanism of thermal explosion (TE) synthesis of TiC–TiB2 particulate locally reinforced steel matrix composites from an Al–Ti–B4C system via a TE-casting route

Materials Chemistry and Physics

DOI

2011

Wetting and evaporation behaviors of molten Mg–Al alloy drops on partially oxidized α-SiC substrates

Materials Chemistry and Physics

DOI

2011

Self-propagating high-temperature synthesis of nano-TiC x particles with different shapes by using carbon nano-tube as C source

Nanoscale Research Letters

DOI

2011

Wetting of B4C, TiC and graphite substrates by molten Mg

Materials Chemistry and Physics

DOI

2011

Pinning–depinning behavior in the wetting of (0 0 0 1) α-Al2O3 single crystal by molten Mg

Applied Surface Science

DOI

2011

Reaction path of the synthesis of α-Al2O3-TiC-TiB2 in an Al-TiO2-B4C system

International Journal of Refractory Metals and Hard Materials

DOI

2011

Effect of Cr on the wetting in Cu/graphite system

Applied Surface Science

DOI

2010

等通道角挤压对Mg-0.6%Zr合金力学性能和阻尼性能的影响

《兵器材料科学与工程》

2010

Wetting of microcrystalline and nanocrystalline Ni substrates by molten Sn–3.5Ag–0.7Cu alloy

Materials Letters

DOI

2010

Wetting of porous graphite by Cu–Ti alloys at 1373 K

Materials Chemistry and Physics

DOI

2010

EFFECT OF Al CONTENT ON THE COMBUSTION SYNTHESIS OF ( TiB 2- Al 2 O 3)/ Al PRODUCTS FROM AN Al - TiO 2- B 2 O 3 SYSTEM

International Journal of Modern Physics B

DOI

2010

Wetting and evaporation behaviors of molten Mg on partially oxidized SiC substrates

Applied Surface Science

DOI

2010

Wetting of Cu substrates with micrometer and nanometer grains by molten Sn‐3.5Ag‐0.7Cu alloy

Surface and Interface Analysis

DOI

2010

Effect of substrate annealing on the wetting of metastable BNi-2 ribbons by molten Sn

Journal of Applied Physics

DOI

2010

Wetting of Polycrystalline α-Al2O3 by Molten Mg in Ar Atmosphere

Metallurgical and Materials Transactions A

DOI

2010

Wetting of polycrystalline MgO by molten Mg under evaporation

Materials Chemistry and Physics

DOI

2010

Growth Mechanism of TiCx during Self-Propagating High-Temperature Synthesis in an Al−Ti−C System

Crystal Growth & Design

DOI

2010

Wetting of TiC by molten Al at 1123–1323K

Acta Materialia

DOI

2010

Warping of triple line in the wetting of B 4 C by a Cu‐1 at.% Cr alloy

Surface and Interface Analysis

DOI

2010

The mechanism of combustion synthesis of (TiCxNy-TiB2)/Ni from a Ni-Ti-C-BN system

Powder Technology

DOI

2009

Zr55Al10Ni5Cu30非晶钎料熔体与α-Al2O3和ZrO2陶瓷的润湿性

《焊接学报》

2009

Effect of nickel addition on the exothermic reaction of the Ti–C–BN system

International Journal of Refractory Metals and Hard Materials

DOI

2009

Electronic structure and phase stability during martensitic transformation in Al-doped ZrCu intermetallics

Journal of Alloys and Compounds

DOI

2009

Evaporation-coupled wetting of ZrO2 by molten Mg in Ar atmosphere

Applied Physics A

DOI

2009

Wettability and reactivity between B4C and molten Zr55Cu30Al10Ni5 metallic glass alloy

Materials Chemistry and Physics

DOI

2009

Reactive wetting of polycrystalline TiC by molten Zr55Cu30Al10Ni5 metallic glass alloy

Journal of materials research/Pratt's guide to venture capital sources

DOI

2009

Role of Fe incorporation in the self-propagating high-temperature synthesis reaction in an Al–Ti–B4C system

Journal of materials research/Pratt's guide to venture capital sources

DOI

2009

Microstructures and Mechanical Properties of ZrC Reinforced (Zr‐Ti)‐Al‐Ni‐Cu Glassy Composites by an In Situ Reaction

Advanced Engineering Materials

DOI

2009

Self-propagating high-temperature synthesis of TiCxNy–TiB2 ceramics from a Ti–B4C–BN system

International Journal of Refractory Metals and Hard Materials

DOI

2009

EFFECT OF BN / Ti RATIO ON THE REACTION SYNTHESIS OF TiB 2- TiN x CERAMICS

International Journal of Modern Physics B

DOI

2009

Al content dependence of reaction behaviors and mechanism in combustion synthesis of TiB2–AlN-based composites

Chemical Engineering Journal

DOI

2009

Wetting of polycrystalline B4C by molten Al at 1173–1473K

Scripta Materialia

DOI

2009

Combustion synthesis of Ti(C, N)–TiB2 from a Ti–C–BN system

Journal of Alloys and Compounds

DOI

2009

Wetting of polycrystalline W by molten Zr55Al10Ni5Cu30 alloy

Materials Chemistry and Physics

DOI

2009

Morphology Evolution of TiCx Grains During SHS in an Al−Ti−C System

Crystal Growth & Design

DOI

2009

Effect of reactant C/Ti ratio on the stoichiometry of Combustion-synthesized TiCx in Ti-C system

Journal of the Ceramic Society of Japan

DOI

2009

Wettability of molten Zr_(55)Al_(10)Ni_5Cu_(30) metallic glass brazing alloy on α-Al_2O_3 and ZrO_2

Transactions of the China Welding Institution

2008

块体镁基非晶合金及其复合材料研究的新进展

《材料工程》

2008

Wetting of Polycrystalline α-Al2O3 by Molten Zr55Cu30Al10Ni5 Metallic Glass Alloy

Metallurgical and Materials Transactions A

DOI

2008

The correlation between the formation of different martensitic structures and the cooling rates in ZrCuAlNiO alloy during solidification

Journal of Alloys and Compounds

DOI

2008

Synthesis and mechanical properties of TiC-reinforced Cu-based bulk metallic glass composites

Scripta Materialia

DOI

2008

Dependence of the SHS reaction behavior and product on B4C particle size in Al–Ti–B4C and Al–TiO2–B4C systems

Materials Research Bulletin

DOI

2008

Reaction Behavior and Mechanism during Self-Propagating High-Temperature Synthesis Reaction in an Al-TiO2-B4C System

Metallurgical and Materials Transactions B

DOI

2008

Effect of TiO2 addition on the combustion synthesis in the Ti–B4C system

Journal of materials research/Pratt's guide to venture capital sources

DOI

2008

Strong work-hardening effect in a multiphase ZrCuAlNiO alloy

Applied Physics Letters

DOI

2008

Formation of a Multiphase Gradient Structure in a Zr–Cu–Ni–Al–O Alloy

Advanced Engineering Materials

DOI

2008

Combustion synthesis of TiCx–TiB2 composites with hypoeutectic, eutectic and hypereutectic microstructures

Journal of the European Ceramic Society

DOI

2008

Effect of Tempering on Microstructure and Mechanical Properties in a Multiphase ZrCuAlNiO Alloy

ISIJ International

DOI

2007

Differential thermal analysis (DTA) on the reaction mechanism in Fe–Ti–B4C system

Journal of Alloys and Compounds

DOI

2007

Reaction synthesis of TiC–TiB2/Al composites from an Al–Ti–B4C system

Journal of Materials Science

DOI

2007

Fabrication of TiC and TiB2 locally reinforced steel matrix composites using a Fe–Ti–B4C–C system by an SHS-casting route

Journal of Materials Science

DOI

2007

Effect of temperature and surface roughness on the wettability of boron nitride by molten Al

Journal of Materials Science

DOI

2007

Study on densification of laser ignited reaction sintering of Ni-Al-Cu powder

Science of Sintering

DOI

2006

Reaction mechanism in self-propagating high temperature synthesis of TiC-TiB2/Al composites from an Al-Ti-B4C system

Materials Science and Engineering A

DOI

2006

Wettability of $$\hbox{R}(01\bar{1}2)$$ single crystalline and polycrystalline $$\alpha\hbox{-}\hbox{Al}_{2}\hbox{O}_{3}$$ substrates by Al–Si alloys over wide composition and temperature ranges

Journal of Materials Science

DOI

2006

Wettability of TiAlN films by molten aluminum

Thin Solid Films

DOI

2006

Wettability of polycrystalline rutile TiO2 by molten Al in different atmospheres

Acta Materialia

DOI

2004

Reaction laser sintering of Ni–Al powder alloys

Optics & Laser Technology

DOI

2000

Study on laser ignition of Ni-33.3at%Al powder compacts

Scripta Materialia

DOI

1999

合金元素对铁锰硅系形状记忆合金层错能的影响

《功能材料》

1999

铁锰硅系形状记忆合金的成分设计

《功能材料》

1999

快速凝固铝硅合金材料及其在汽车中的应用

《材料科学与工程学报》

1998

FeMnSiCrNi形状记忆合金耐腐蚀性能研究

《功能材料》

1997

铁锰硅铬镍形状记忆合金的性能

《稀有金属》

1997

回复应变退火温度对铁锰硅合金形状记忆效应的影响

《功能材料》

2013

Role of Si in the Wetting of α-SiC by Al

Springer eBooks

DOI