李勇铜｜兰州理工大学｜学者主页

2026

搅拌式移动床热交换器异形颗粒迁移特性研究

佘敏敏，余龙，曹平，尤雄伟，李勇铜，宋伟

《化工机械》

DOI

2026

超高温角式截止阀复合冷却结构性能研究

余龙，席瑜乾，陈双琪，由玄达，李勇铜

《机械设计与研究》

2026

Design of Air Cooled Lithium Battery Thermal Management System with Z-step Type Flow Pattern Based on Electrochemical-Thermal Coupled Model

Yongtong Li, T. Ding, Wenshuang Cui, Xiao-Gang Xu

Future Batteries

DOI

2026

Design of biomimetic wheat-grain-shaped pin fins for enhanced heat transfer in microchannel heat sink

Yongtong Li, Yunxi Yang, Liang Gong, Wenshuang Cui, Bo-Yu Yang

Applied Thermal Engineering

DOI

2026

Experimental investigation of heat transfer enhancement using microencapsulated phase change slurry in metal foam heat sinks

Yongtong Li, Zhaolin Yu, Mengyu Lu, Wenshuang Cui, Man Zhao, Kai Guo

International Communications in Heat and Mass Transfer

DOI

2026

Microencapsulated phase change slurry for enhanced pin‑finned metal foam heat sink

Yongtong Li, Zhaolin Yu, Liang Gong, Wenshuang Cui, Kai Guo

International Journal of Heat and Mass Transfer

DOI

2026

Forced convection heat transfer of microencapsulated phase change material slurry in plate-finned metal foam heat sink

Yongtong Li, Boyu Yang, Wenshuang Cui, Yunxi Yang, Kai Guo

Applied Thermal Engineering

DOI

2025

相变微胶囊在金属泡沫微通道中的换热特性

李勇铜，孙静，王玮铂，杨博宇，杨云茜

《过程工程学报》

2025

基于响应面法的PFHE封头流量分配特性多目标优化

余龙，曹平，佘敏敏，尤雄伟，李勇铜，沈文朋

《化工机械》

DOI

2025

Machine learning prediction of thermo-hydraulic performance in gradient metal foam heat sink with microencapsulated phase change material slurry

Yongtong Li, Bo-Yu Yang, Liang Gong, Wenshuang Cui, Yunxi Yang

International Journal of Heat and Mass Transfer

DOI

2024

立式粉体干燥器内二元湿颗粒气-固逆流过程的数值模拟

余龙，庞冬冬，陈双琪，佘敏敏，李勇铜，沈文朋，孟亚慧

《中国粉体技术》

2024

内嵌微柱群的渐扩液冷板电池热管理性能研究

赵文飞，李勇铜，王玮铂，孙静，陈久亮

《电源技术》

2024

Performance evaluation and parameter optimization of tubular direct absorption solar collector with photothermal nanofluid

Li-Qun Zhou, Wei-Lin Yang, Chaojie Li, Shi Lin, Yongtong Li

Applied Thermal Engineering

DOI

2022

新型金属泡沫-微柱群复合热沉内流动传热性能分析

李勇铜，刘健，杨来顺

《化工进展》

2022

Numerical analysis of the performance of proton exchange membrane fuel cell with longitudinal vortex generators

Laishun Yang, Luhao Shi, Ding Xian, Weiwei Cui, Guozhang Chang, Cuiping Wang, Guangxi Yue, Yongtong Li

Energy Reports

DOI

2022

Effect of cathode operation parameters on the performance of proton exchange membrane fuel cell with curved wing vortex generator by response surface method

Lai-Shun Yang, L. Shi, Wei-Wei Cui, Yi-Chao Xu, J. Mao, Yongtong Li, Dongfang Jiang, G. Yue

Energy Science & Engineering

DOI

2021

Thermal management of power electronics with liquid cooled metal foam heat sink

Yongtong Li, L. Gong, Bin Ding, Ming-hai Xu, Y. Joshi

International journal of thermal sciences

DOI

2020

Enhancing the performance of aluminum foam heat sinks through integrated pin fins

Yongtong Li, L. Gong, Ming-hai Xu, Y. Joshi

DOI

2020

A Review of Thermo-Hydraulic Performance of Metal Foam and Its Application as Heat Sinks for Electronics Cooling

Yongtong Li, L. Gong, Ming-hai Xu, Y. Joshi

Journal of Electronic Packaging

DOI

2020

Thermal Modeling and Analysis of Metal Foam Heat Sink with Thermal Equilibrium and Non-Equilibrium Models

Yongtong Li, L. Gong, Hui Lu, Dexin Zhang, Bin Ding

DOI

2020

Hydraulic and thermal performances of metal foam and pin fin hybrid heat sink

Yongtong Li, L. Gong, Ming-hai Xu, Y. Joshi

DOI

2019

Thermal Performance of Metal Foam Heat Sink with Pin Fins for Non-Uniform Heat Flux Electronics Cooling

Yongtong Li, L. Gong, Ming-hai Xu, Y. Joshi

Semiconductor Thermal Measurement and Management Symposium

DOI

2019

Thermal Performance and Mechanics Characteristic for Double Layer Microchannel Heat Sink

Yupeng Xu, L. Gong, Yongtong Li, Z. Bai, Ming-hai Xu

Journal of Thermal Science

DOI

2018

THERMAL PERFORMANCE ANALYSIS OF MICRO-CHANNEL HEAT SINK WITH NON-UNIFORM METAL FOAM DESIGN

Yongtong Li, L. Gong, Ming-hai Xu

DOI

2018

Thermal performance of micro-channel heat sink with metallic porous/solid compound fin design

L. Gong, Yongtong Li, Z. Bai, Ming-hai Xu

Applied Thermal Engineering

DOI

2018

Thermal hydraulic performance of micro-channel heat sink with composite metal foam-solid fin design

Yongtong Li, L. Gong, Ming-hai Xu, Zhang Bai

Chinese Science Bulletin

DOI

2017

Thermal Performance Analysis of Biporous Metal Foam Heat Sink

Yongtong Li, L. Gong, Ming-hai Xu, Y. Joshi

DOI

2015

多孔金属布置对热沉传热特性影响的数值研究

李勇铜，巩亮，张克舫，徐会金

《工程热物理学报》

2014

金属泡沫微流道热沉内流体流动与传热特性的数值研究

李勇铜，徐会金，巩亮，张克舫

《应用数学和力学》

李勇铜

精选作品

期刊论文

搅拌式移动床热交换器异形颗粒迁移特性研究

超高温角式截止阀复合冷却结构性能研究

Design of Air Cooled Lithium Battery Thermal Management System with Z-step Type Flow Pattern Based on Electrochemical-Thermal Coupled Model

Design of biomimetic wheat-grain-shaped pin fins for enhanced heat transfer in microchannel heat sink

Experimental investigation of heat transfer enhancement using microencapsulated phase change slurry in metal foam heat sinks

Microencapsulated phase change slurry for enhanced pin‑finned metal foam heat sink

Forced convection heat transfer of microencapsulated phase change material slurry in plate-finned metal foam heat sink

相变微胶囊在金属泡沫微通道中的换热特性

基于响应面法的PFHE封头流量分配特性多目标优化

Machine learning prediction of thermo-hydraulic performance in gradient metal foam heat sink with microencapsulated phase change material slurry

立式粉体干燥器内二元湿颗粒气-固逆流过程的数值模拟

内嵌微柱群的渐扩液冷板电池热管理性能研究

Performance evaluation and parameter optimization of tubular direct absorption solar collector with photothermal nanofluid

新型金属泡沫-微柱群复合热沉内流动传热性能分析

Numerical analysis of the performance of proton exchange membrane fuel cell with longitudinal vortex generators

Effect of cathode operation parameters on the performance of proton exchange membrane fuel cell with curved wing vortex generator by response surface method

Thermal management of power electronics with liquid cooled metal foam heat sink

Enhancing the performance of aluminum foam heat sinks through integrated pin fins

A Review of Thermo-Hydraulic Performance of Metal Foam and Its Application as Heat Sinks for Electronics Cooling

Thermal Modeling and Analysis of Metal Foam Heat Sink with Thermal Equilibrium and Non-Equilibrium Models

Hydraulic and thermal performances of metal foam and pin fin hybrid heat sink

Thermal Performance of Metal Foam Heat Sink with Pin Fins for Non-Uniform Heat Flux Electronics Cooling

Thermal Performance and Mechanics Characteristic for Double Layer Microchannel Heat Sink

THERMAL PERFORMANCE ANALYSIS OF MICRO-CHANNEL HEAT SINK WITH NON-UNIFORM METAL FOAM DESIGN

Thermal performance of micro-channel heat sink with metallic porous/solid compound fin design

Thermal hydraulic performance of micro-channel heat sink with composite metal foam-solid fin design

Thermal Performance Analysis of Biporous Metal Foam Heat Sink

多孔金属布置对热沉传热特性影响的数值研究

金属泡沫微流道热沉内流体流动与传热特性的数值研究

研究方向