王习术｜清华大学｜学者主页

2025

Comparison of surface pretreatments effects on fatigue damage behavior identification of metals under in-situ SEM tests

Rui‐Guo Yan, Li‐Na Zhu, Xishu Wang

Materials Science and Engineering A

DOI

2025

Assessment of stress identification for high-speed railway axle based on acceleration signals

Wenjing Wang, Yiyue Chen, Rui‐Guo Yan, Hua Zou, Xishu Wang

Measurement

DOI

2025

Evaluation of Small Fatigue Crack Growth Rates in HIP FGH96 Superalloy Under Microstructural Influences

Rui‐Guo Yan, Li‐Na Zhu, An Liu, Xishu Wang

Fatigue & Fracture of Engineering Materials & Structures

DOI

2024

Research on size effects in fracture properties and residual life prediction for high-speed train axles

Rui‐Guo Yan, Wenjing Wang, Ran Ding, Yiming Zeng, Wei Shan, Yi Yin, Xishu Wang

Theoretical and Applied Fracture Mechanics

DOI

2024

An Uncertainty Evaluation on the ΔKth and ΔKIC of Fine-grained Isotropic Graphite

Yantian Zhang, Lina Zhu, Ruiguo Yan, Xishu Wang

Acta Mechanica Solida Sinica

DOI

2023

Micro-arc oxidation of Al alloys: mechanism, microstructure, surface properties, and fatigue damage behavior

Jianzhuo Zhang, Weibing Dai, Xishu Wang, Yaming Wang, Haitao Yue, Qiang Li, Xinle Yang, Chenguang Guo, Changyou Li

Journal of Materials Research and Technology

DOI

2023

Effect of different loading conditions on corrosion fatigue crack growth rate of a nickel-based alloy in supercritical water

Zhenyu Chen, Zhongliang Zhu, Bihui Wang, Chenhao Ma, Yutong Liu, Hasan Izhar Khan, Peiyuan Pan, Tianyi Zhang, Xishu Wang, Naiqiang Zhang

International Journal of Fatigue

DOI

2022

FGHxx系列合金疲劳损伤行为表征、评价与展望

王习术，刘安，许巍，张悦，梁准，何玉怀

《固体力学学报》

2022

Fatigue performance differences between rolled and selective laser melted Ti6Al4V alloys

Zhongwei Xu, An Liu, Xishu Wang

Materials Characterization

DOI

2021

Investigation of the fatigue damage mechanism of Inconel 617 at elevated temperatures obtained by in situ SEM fatigue tests

Qiang Wang, Xishu Wang, Naiqiang Zhang

International Journal of Fatigue

DOI

2021

Influence of macrozones on the fatigue cracking behavior and fracture mechanisms of rolled Ti–6Al–4V alloy

Zhongwei Xu, An Liu, Xishu Wang

Materials Science and Engineering A

DOI

2021

Fatigue performance and crack propagation behavior of selective laser melted AlSi10Mg in 0°, 15°, 45° and 90° building directions

Zhongwei Xu, An Liu, Xishu Wang

Materials Science and Engineering A

DOI

2020

Fatigue limit prediction model and fatigue crack growth mechanism for selective laser melting Ti6Al4V samples with inherent defects

Zhongwei Xu, An Liu, Xishu Wang, Bin Liu, Minghai Guo

International Journal of Fatigue

DOI

2020

An efficient fatigue and creep‐fatigue life prediction method by using the hysteresis energy density rate concept

Qiang Wang, Zhongwei Xu, Xishu Wang

Fatigue & Fracture of Engineering Materials & Structures

DOI

2020

A New 3D Creep-Fatigue-Elasticity Damage Interaction Diagram Based on the Total Tensile Strain Energy Density Model

Qiang Wang, Naiqiang Zhang, Xishu Wang

Metals

DOI

2018

Influence of Multi-Holes on Fatigue Behaviors of Cast Magnesium Alloys Based on In-Situ Scanning Electron Microscope Technology

Xishu Wang, Changhao Tan, Juan Ma, Xiaodong Zhu, Qingyuan Wang

Materials

DOI

2018

Rotating Bending Fatigue Microscopic Fracture Characteristics and Life Prediction of 7075-T7351 Al Alloy

Huihui Yang, Zhihao Zhang, Changhao Tan, Makoto Ito, Pan Pan, Xishu Wang

Metals

DOI

2017

Microarc Oxidation Coating Combined with Surface Pore-Sealing Treatment Enhances Corrosion Fatigue Performance of 7075-T7351 Al Alloy in Different Media

Huihui Yang, Xishu Wang, Yaming Wang, Yanling Wang, Zhihao Zhang

Materials

DOI

2017

High-Cycle Microscopic Severe Corrosion Fatigue Behavior and Life Prediction of 25CrMo Steel Used in Railway Axles

Xi-Shu Wang, Xishu Wang, Shengchuan Wu, Huihui Yang, Zhihao Zhang

Metals

DOI

2016

表面撞击坑对高铁车辆空心车轴运行安全性评估的影响

徐忠伟，吴圣川，康国政，王习术

《计算机辅助工程》

2016

The Effects of Corrosive Media on Fatigue Performance of Structural Aluminum Alloys

Huihui Yang, Yanling Wang, Xishu Wang, Pan Pan, Dawei Jia

Metals

DOI

2016

Evaluation of the critical stress of anodized coating-AZ91D substrate using SEM in-situ technology

Xishu Wang

Journal of Zhejiang University. Science A

DOI

2015

Environment-induced fatigue cracking behavior of aluminum alloys and modification methods

Xishu Wang, Xudong Li, Huihui Yang, Norio KAWAGOISHI, Pan Pan

Corrosion Reviews

DOI

2014

Fatigue damage behavior of a surface-mount electronic package under different cyclic applied loads

Huaihui Ren, Xishu Wang

Chinese Physics B

DOI

2014

Effect of loading type on fatigue crack growth behavior of solder joint in electronic packaging

Xishu Wang, Huaihui Ren, Bisheng Wu, Su Ja, Norio KAWAGOISHI

Acta Mechanica Solida Sinica

DOI

2014

Improvement on the Fatigue Performance of 2024-T4 Alloy by Synergistic Coating Technology

Xishu Wang, Xingwu Guo, Xudong Li, Dongyun Ge

Materials

DOI

2013

2B1 Effect of Plasma Electrolytic Oxidation on Fatigue Strength of Age-hardened A1 Alloy

Xishu Wang, Xingwu Guo, Xudong Li, Norio KAWAGOISHI, Yuzo NAKAMURA

The Proceedings of Conference of Kyushu Branch

DOI

2012

NTK300型风电机组主轴疲劳断裂失效分析

任淮辉，陶刚正，张海涛，王习术

《工程与试验》

2012

利用原位观察技术测定TC4钛合金的疲劳裂纹扩展门槛值

张敏，宋西平，林均品，焦泽辉，于慧臣，王习术

《理化检验-物理分册》

2012

Experimental and theoretical analyses of package-on-package structure under three-point bending loading

Jia Su, Xishu Wang, Huaihui Ren

Chinese Physics B

DOI

2012

Fatigue properties of age-hardened Al alloy 2017-T4 under ultrasonic loading

Nu Yan, Qingyuan Wang, Xishu Wang, Q. Chen, Norio KAWAGOISHI

Theoretical and Applied Mechanics Letters

DOI

2012

EFFECTS OF AGING STRUCTURES AND HUMIDITY ON FATIGUE PROPERTIES OF MARAGING STEEL

Kousuke Hayashi, Takanori Nagano, Michihiko Moriyama, Xishu Wang, Norio KAWAGOISHI

International Journal of Modern Physics Conference Series

DOI

2012

Determination of Fatigue Crack Growth Threshold of TC4 Titanium Alloy by In-situ Observation Technology

Xishu Wang

Physical Testing and Chemical Analysis

2011

Effect of prior corrosion state on the fatigue small cracking behaviour of 6151-T6 aluminum alloy

Xudong Li, Xishu Wang, Huaihui Ren, Ying-Long Chen, Zhitao Mu

Corrosion Science

DOI

2010

先进材料力学行为实验指南 = Experimental guide on mechanical behavior of advanced materials

王习术

《清华大学出版社》

2010

材料力学行为试验与分析

王习术

2010

INITIATION AND PROPAGATION BEHAVIOR OF A FATIGUE CRACK OF ALLOY 718

Norio KAWAGOISHI, Masahiro Goto, Xishu Wang, Qingyuan Wang

International Journal of Modern Physics B

DOI

2009

SnPb焊点结构的高周疲劳行为检测与寿命表征方法

王习术，阎成琨，Murai Ryosuke，赵海燕

《南京大学学报(自然科学)》

2009

工程结构钢疲劳寿命分散性评价方法

吴新如，华心，王习术

《工程与试验》

2009

航空用超高强度钢疲劳裂纹表面长度与内部长度之间的关系

王苗苗，曾燕屏，王习术，谢锡善

《航空材料学报》

2008

拉伸载荷作用下AlN夹杂物对航空用超高强度钢中裂纹萌生的影响

王苗苗，曾燕屏，王习术，谢锡善，范红妹

《钢铁研究学报》

2007

夹杂物特征参数对拉伸载荷下超高强度钢裂纹萌生与扩展的影响

范红妹，曾燕屏，王习术，谢锡善

《航空材料学报》

2007

航空用超高强度钢中夹杂物导致疲劳裂纹萌生与扩展的微观行为

范红妹，曾燕屏，王习术，崔正强，谢锡善

《钢铁》

2007

Effect of equal channel angular extrusion process on deformation behaviors of Mg-3Al-Zn alloy

Xishu Wang, Jin Li, Ying Li, Xingwu Guo

Materials Letters

DOI

2006

铸造镁铝合金的微观破坏机理原位观测技术与应用

王习术，汤彬，陶沙

《机械工程材料》

2006

材料各向异性力学行为试验研究方法探讨

王习术，李春

《工程与试验》

2006

SEM in-situ investigation on fatigue cracking behavior of P/M Rene95 alloy with surface inclusions

Xishu Wang, Lina Zhang, Zeng Yanping, Xishan Xie

International Journal of Minerals Metallurgy and Materials

DOI

2005

夹杂物对超高强度钢低周疲劳裂纹萌生及扩展影响的原位观测

王习术，梁锋，曾燕屏，谢锡善

《金属学报》

2005

Effect of the fabrication process on fatigue performance of U3Si2 fuel plate with sandwich structure

Xishu Wang, Shuangshou Li, Qingyuan Wang, Yong Xu

Journal of Nuclear Materials

DOI

2004

Experiments, characterizations and analysis of a U3Si2–Al dispersion fuel plate with sandwich structure

Xishu Wang, Yong Xu

Journal of Nuclear Materials

DOI

2004

Direct Observation of Fatigue Cracking in the Fuel Plate Using the Scanning Electron Microscope

Xishu Wang, Yong Xu, Xianqi Xu

Applied Composite Materials

DOI

2004

SEM online investigation of fatigue crack initiation and propagation in cast magnesium alloy

Xishu Wang, Jinghong Fan

Journal of Materials Science

DOI

2003

泡沫金属双向等速拉伸载荷强度与孔率的近似关系

刘培生，王习术

《稀有金属材料与工程》

2003

U3Si2-Al燃料板拉伸力学性能试验研究

徐勇，胡华炜，王习术，庄红权

《核动力工程》

2003

阳极氧化对镁合金力学性能的影响

郭兴伍，王习术，丁文江，卢晨，翟春泉

《材料保护》

2003

U3Si2-Al弥散型燃料板制备工艺对力学性能的影响

王习术，朱随群，徐勇

《核动力工程》

2003

Investigation of surface fatigue microcrack growth behavior of cast Mg–Al alloy

Xishu Wang, Xiao Lu, Donghui Wang

Materials Science and Engineering A

DOI

2003

Mechanical Characterizations of the Dispersion U3Si2-Al Fuel Plate with Sandwich Structure

Xishu Wang, Yong Xu

Applied Composite Materials

DOI

2003

Tensile mechanical properties of U_3Si_2-Al fuel plate

Xu Yong, Hu Huawei, Zhuang Hong-quan, Xishu Wang

Hedongli gongcheng

2002

U3Si2-Al燃料元件板力学性能试验研究

庄红权，徐勇，王习术

《原子能科学技术》

2002

“夹心饼干”式弥散型复合燃料板的断裂机理

王习术，徐勇，邓燕红

《清华大学学报(自然科学版)》

1999

不同热处理的铝合金在应力梯度影响下表面裂纹扩展特性的评价

王习术，皮龙石纪雄，余寿文

《工程力学》

精选作品

期刊论文

Comparison of surface pretreatments effects on fatigue damage behavior identification of metals under in-situ SEM tests

Assessment of stress identification for high-speed railway axle based on acceleration signals

Evaluation of Small Fatigue Crack Growth Rates in HIP FGH96 Superalloy Under Microstructural Influences

Research on size effects in fracture properties and residual life prediction for high-speed train axles

An Uncertainty Evaluation on the ΔKth and ΔKIC of Fine-grained Isotropic Graphite

Micro-arc oxidation of Al alloys: mechanism, microstructure, surface properties, and fatigue damage behavior

Effect of different loading conditions on corrosion fatigue crack growth rate of a nickel-based alloy in supercritical water

FGHxx系列合金疲劳损伤行为表征、评价与展望

Fatigue performance differences between rolled and selective laser melted Ti6Al4V alloys

Investigation of the fatigue damage mechanism of Inconel 617 at elevated temperatures obtained by in situ SEM fatigue tests

Influence of macrozones on the fatigue cracking behavior and fracture mechanisms of rolled Ti–6Al–4V alloy

Fatigue performance and crack propagation behavior of selective laser melted AlSi10Mg in 0°, 15°, 45° and 90° building directions

Fatigue limit prediction model and fatigue crack growth mechanism for selective laser melting Ti6Al4V samples with inherent defects

An efficient fatigue and creep‐fatigue life prediction method by using the hysteresis energy density rate concept

A New 3D Creep-Fatigue-Elasticity Damage Interaction Diagram Based on the Total Tensile Strain Energy Density Model

Influence of Multi-Holes on Fatigue Behaviors of Cast Magnesium Alloys Based on In-Situ Scanning Electron Microscope Technology

Rotating Bending Fatigue Microscopic Fracture Characteristics and Life Prediction of 7075-T7351 Al Alloy

Microarc Oxidation Coating Combined with Surface Pore-Sealing Treatment Enhances Corrosion Fatigue Performance of 7075-T7351 Al Alloy in Different Media

High-Cycle Microscopic Severe Corrosion Fatigue Behavior and Life Prediction of 25CrMo Steel Used in Railway Axles

表面撞击坑对高铁车辆空心车轴运行安全性评估的影响

The Effects of Corrosive Media on Fatigue Performance of Structural Aluminum Alloys

Evaluation of the critical stress of anodized coating-AZ91D substrate using SEM in-situ technology

Environment-induced fatigue cracking behavior of aluminum alloys and modification methods

Fatigue damage behavior of a surface-mount electronic package under different cyclic applied loads

Effect of loading type on fatigue crack growth behavior of solder joint in electronic packaging

Improvement on the Fatigue Performance of 2024-T4 Alloy by Synergistic Coating Technology

2B1 Effect of Plasma Electrolytic Oxidation on Fatigue Strength of Age-hardened A1 Alloy

NTK300型风电机组主轴疲劳断裂失效分析

利用原位观察技术测定TC4钛合金的疲劳裂纹扩展门槛值

Experimental and theoretical analyses of package-on-package structure under three-point bending loading

Fatigue properties of age-hardened Al alloy 2017-T4 under ultrasonic loading

EFFECTS OF AGING STRUCTURES AND HUMIDITY ON FATIGUE PROPERTIES OF MARAGING STEEL

Determination of Fatigue Crack Growth Threshold of TC4 Titanium Alloy by In-situ Observation Technology

Effect of prior corrosion state on the fatigue small cracking behaviour of 6151-T6 aluminum alloy

先进材料力学行为实验指南 = Experimental guide on mechanical behavior of advanced materials

材料力学行为试验与分析

INITIATION AND PROPAGATION BEHAVIOR OF A FATIGUE CRACK OF ALLOY 718

SnPb焊点结构的高周疲劳行为检测与寿命表征方法

工程结构钢疲劳寿命分散性评价方法

航空用超高强度钢疲劳裂纹表面长度与内部长度之间的关系

拉伸载荷作用下AlN夹杂物对航空用超高强度钢中裂纹萌生的影响

夹杂物特征参数对拉伸载荷下超高强度钢裂纹萌生与扩展的影响

航空用超高强度钢中夹杂物导致疲劳裂纹萌生与扩展的微观行为

Effect of equal channel angular extrusion process on deformation behaviors of Mg-3Al-Zn alloy

铸造镁铝合金的微观破坏机理原位观测技术与应用

材料各向异性力学行为试验研究方法探讨

SEM in-situ investigation on fatigue cracking behavior of P/M Rene95 alloy with surface inclusions

夹杂物对超高强度钢低周疲劳裂纹萌生及扩展影响的原位观测

Effect of the fabrication process on fatigue performance of U3Si2 fuel plate with sandwich structure

Experiments, characterizations and analysis of a U3Si2–Al dispersion fuel plate with sandwich structure

Direct Observation of Fatigue Cracking in the Fuel Plate Using the Scanning Electron Microscope

SEM online investigation of fatigue crack initiation and propagation in cast magnesium alloy

泡沫金属双向等速拉伸载荷强度与孔率的近似关系

U3Si2-Al燃料板拉伸力学性能试验研究

阳极氧化对镁合金力学性能的影响

U3Si2-Al弥散型燃料板制备工艺对力学性能的影响

Investigation of surface fatigue microcrack growth behavior of cast Mg–Al alloy

Mechanical Characterizations of the Dispersion U3Si2-Al Fuel Plate with Sandwich Structure

Tensile mechanical properties of U_3Si_2-Al fuel plate

U3Si2-Al燃料元件板力学性能试验研究

“夹心饼干”式弥散型复合燃料板的断裂机理

不同热处理的铝合金在应力梯度影响下表面裂纹扩展特性的评价

会议论文

MEMS微结构疲劳失效行为的SEM原位试验与表征

简便快速材料环境疲劳试验与评估方法

焊点结构高周疲劳特性与表征SEM原位研究

大变形镁合金晶粒表面滑移机理SEM原位观测试验研究

夹杂物对超高强度钢长寿命疲劳断裂的影响

铸造Mg-Al合金疲劳裂纹萌生与扩展原位观测与评价

SEM原位观测在固体材料的微观失效机理分析中的作用

书籍章节

Fatigue Cracking Behaviors and Influence Factors of Cast Magnesium Alloys

研究方向