李安海

2026

基于课程思政与项目驱动的智能制造装备设计课程教学改革与实践

《高教学刊》

2026

Influence of bowl rim remelting for combustion chamber on performance of highly reinforced diesel engine pistons

Journal of the Brazilian Society of Mechanical Sciences and Engineering

DOI

2026

Synergistic effect of diamond-like carbon coating and micro-texturing on reducing mechanical and thermal damage during bone drilling

Journal of Materials Research and Technology

DOI

2026

Influence of precision boring and subsequent ultrasonic rolling on hole-surface integrity of forged 42CrMo steel

The International Journal of Advanced Manufacturing Technology

DOI

2026

An online chatter detection for milling based on a novel convolutional neural network and small probability hypothesis method

Journal of Manufacturing Processes

DOI

2026

Structural Design and Fatigue Analysis of Irregular Pinholes in Forged Steel Pistons

Transactions of FAMENA

DOI

2025

A new three-edge bone drill designed to reduce mechanical and thermal damage

International Journal of Thermal Sciences

DOI

2025

Milling force prediction in titanium alloy thin-walled components side milling based on Tri-Dexel model with comprehensive consideration of tool runout and workpiece deflection

Journal of Manufacturing Processes

DOI

2025

Mechanical damage induction mechanisms and process optimization of drilling considering cortical bone material heterogeneity

Materials Today Communications

DOI

2024

Modeling and verification of cortical bone drilling temperature considering heterogeneous structures

International Communications in Heat and Mass Transfer

DOI

2024

Chip formation and removal mechanisms in cutting of cortical bones with heterogeneous tissue structures

Journal of Manufacturing Processes

DOI

2024

Simulation Study on Residual Stress Distribution of Machined Surface Layer in Two-Step Cutting of Titanium Alloy

Materials

DOI

2024

Modeling and verification of cortical bone drilling forces based on tissue structure heterogeneity

CIRP journal of manufacturing science and technology

DOI

2024

Experimental study on cutting force in two-step milling of profile walled surface of titanium alloy

Journal of Mechanical Science and Technology

DOI

2023

钛合金型面侧壁铣削力建模与仿真

《制造技术与机床》

DOI

2023

基于净切削比能的钛合金清洁切削加工表面完整性研究

《表面技术》

2023

Effect of machined surface integrity on fatigue resistance of aluminum-silicon alloy ZL109

Materials Today Communications

DOI

2023

Laser Processing and Multi-Energy Field Manufacturing of High-Performance Materials

Materials

DOI

2023

Adjusting machined surface integrity of aluminum–silicon alloy through step-by-step feed cutting and multi-step finish cutting method

The International Journal of Advanced Manufacturing Technology

DOI

2023

Preparation of In Situ Growth Multiscale β-Sialon Grain-Reinforced Al2O3-Based Composite Ceramic Tool Materials

Materials

DOI

2022

面向智能制造的新工科课程教学改革与探索——以“增材制造工艺与材料”课程为例

《教育教学论坛》

2022

Optimization of Forged 42CrMo4 Steel Piston Pin Hole Profile Using Finite Element Method

Tehnicki vjesnik - Technical Gazette

DOI

2022

Effect of cutting process adjustment on crystallographic texture of machined surface layer of titanium alloy

Archives of Civil and Mechanical Engineering

DOI

2022

Microstructure and Properties of WC/Ni-Based Laser-Clad Coatings with Different WC Content Values

Materials

DOI

2022

Surface Properties of Medium-Entropy Alloy Coatings Prepared through a Combined Process of Laser Cladding and Ultrasonic Burnishing

Materials

DOI

2022

Effect of surface roughness on stress concentration factor of machined surface and cutting parameter optimization in boring of Al-Si piston alloy

The International Journal of Advanced Manufacturing Technology

DOI

2022

Performance of High-Speed Steel Drills in Wet Drilling Inconel 718 Superalloy

Experimental Techniques

DOI

2022

Step-dependent grain refinement and micro-harness evolution during chip formation process in orthogonal cutting of titanium alloy Ti-6Al-4V

The International Journal of Advanced Manufacturing Technology

DOI

2022

Surface quality adjustment and controlling mechanism of machined surface layer in two-step milling of titanium alloy

The International Journal of Advanced Manufacturing Technology

DOI

2022

Effect of alloying elements on surface temperature field of aluminum piston in diesel engine

Engineering Failure Analysis

DOI

2021

切削速度对钛合金高速铣削加工表面层相变的影响

《工具技术》

2021

42CrMo钢多工步车削加工表面完整性研究

《工具技术》

2021

Effect of Surface Micro-Hardness Change in Multistep Machining on Friction and Wear Characteristics of Titanium Alloy

Applied Sciences

DOI

2020

Tool condition monitoring in milling process using multifractal detrended fluctuation analysis and support vector machine

The International Journal of Advanced Manufacturing Technology

DOI

2020

Cutting performance and wear mechanisms of TiAlN PVD-coated cemented carbide tool in high speed turning of Ti-5Al-2Sn-2Zr-4Mo-4Cr alloy

Journal of Mechanical Science and Technology

DOI

2020

Effect of cutting parameters and tool rake angle on the chip formation and adiabatic shear characteristics in machining Ti-6Al-4V titanium alloy

The International Journal of Advanced Manufacturing Technology

DOI

2020

Surface integrity enhancement of ZL109 aluminum-silicon piston alloy employing the forward and reverse finish cutting method

The International Journal of Advanced Manufacturing Technology

DOI

2019

金属切削加工本构模型研究进展

《金刚石与磨料磨具工程》

DOI

2019

刀具磨损状态监测技术研究进展

《工具技术》

2019

ZL109硅铝合金车削加工表面质量研究

《工具技术》

2019

Dry wear characteristics of machined ZL109 aluminum-silicon alloy surface under unidirectional and reciprocating rolling-contact friction

Surface Topography Metrology and Properties

DOI

2019

Crystallographic texture evolution and tribological behavior of machined surface layer in orthogonal cutting of Ti-6Al-4V alloy

Journal of Materials Research and Technology

DOI

2019

Finite element simulation study on pre-stress multi-step cutting of Ti-6Al-4V titanium alloy

The International Journal of Advanced Manufacturing Technology

DOI

2019

FEM simulation-based cutting parameters optimization in machining aluminum-silicon piston alloy ZL109 with PCD tool

Journal of Mechanical Science and Technology

DOI

2018

钛合金加工表面晶体塑性模拟和分析

《机械设计与制造》

2018

粗加工切削参数对钛合金多工步加工过程的影响

《制造技术与机床》

DOI

2018

铝合金活塞销孔加工过程工艺优化

《制造技术与机床》

2018

Effect of cutting parameters on surface quality in multi-step turning of Ti-6Al-4V titanium alloy

The International Journal of Advanced Manufacturing Technology

DOI

2017

铝合金活塞铸造过程中模具易失效区域预测

《材料工程》

2017

Study of Chip Morphology and Chip Formation Mechanism During Machining of Magnesium-Based Metal Matrix Composites

Journal of Manufacturing Science and Engineering

DOI

2017

Effect of cutting speed on chip formation and wear mechanisms of coated carbide tools when ultra-high-speed face milling titanium alloy Ti-6Al-4V

Advances in Mechanical Engineering

DOI

2017

Serrated chip formation mechanism analysis for machining of titanium alloy Ti-6Al-4V based on thermal property

The International Journal of Advanced Manufacturing Technology

DOI

2017

FEM-simulation of machining induced surface plastic deformation and microstructural texture evolution of Ti-6Al-4V alloy

International Journal of Mechanical Sciences

DOI

2016

导热系数对钛合金切削绝热剪切影响的有限元模拟

《硬质合金》

2016

Effects of initial particle size distribution and sintering parameters on microstructure and mechanical properties of functionally graded WC-TiC-VC-Cr3C2-Co hard alloys

Ceramics International

DOI

2016

Design and simulation of thermal residual stresses of coatings on WC-Co cemented carbide cutting tool substrate

Journal of Mechanical Science and Technology

DOI

2016

Modeling and Simulation of Cutting Forces in Side Milling

Key engineering materials

DOI

2016

Optimal selection of cutting tool materials based on multi-criteria decision-making methods in machining Al-Si piston alloy

The International Journal of Advanced Manufacturing Technology

DOI

2016

Microstructural Effect on Crack Propagation Behavior of Ceramic Tool Materials via Cohesive Zone Modeling

Materials science forum

DOI

2015

WC-Co硬质合金刀具材料与钛合金化学匹配性研究

《硬质合金》

2015

超细晶粒硬质合金刀具材料的研究进展

《工具技术》

2015

基于钛合金高速铣削刀具失效演变的硬质合金涂层刀具设计与制造

《金属加工(冷加工)》

2015

Coated carbide tool failure analysis in high-speed intermittent cutting process based on finite element method

The International Journal of Advanced Manufacturing Technology

DOI

2015

Wear Mechanism Analysis of Coated Carbide Tools in High-Speed Milling of Ti-6Al-4V Alloy via Cross-Section Characterization of Worn Cutting Edge

DOI

2014

先进切削刀具及未来趋势

《航空制造技术》

2014

采样间距对球头铣削表面三维形貌参数的影响

《硬质合金》

2014

Experimental Study on Cutting Forces and Surface Integrity in High-Speed Side Milling ofTi-6Al-4VTitanium Alloy

Machining Science and Technology

DOI

2014

Chip Formation in High-Speed Milling of Titanium Alloy with PCD Tools

Materials science forum

DOI

2014

Effects of cutting conditions on microhardness and microstructure in high-speed milling of H13 tool steel

The International Journal of Advanced Manufacturing Technology

DOI

2014

Cutting forces and tool failure in high-speed milling of titanium alloy TC21 with coated carbide tools

Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture

DOI

2014

Performance evaluation of ultra-fine grain carbide in high-speed milling of Ti-6Al-4V

International Journal of Precision Engineering and Manufacturing

DOI

2014

Simulation-based solid carbide end mill design and geometry optimization

The International Journal of Advanced Manufacturing Technology

DOI

2013

WC-Co硬质合金微观结构随机分布模型与弹性性能预报

《材料热处理学报》

2013

基于微观结构的WC-Co硬质合金硬度预报模型

《材料工程》

2013

WC-Co硬质合金微观结构的参数化模型

《材料工程》

2013

A comparison between whisker-reinforced alumina and SiAlON ceramic tools in high-speed face milling of Inconel 718

Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture

DOI

2013

Microstructure-level modeling and simulation of the flexural behavior of ceramic tool materials

Computational Materials Science

DOI

2013

Three-dimensional finite element modeling of high-speed end milling operations of Ti-6Al-4V

Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture

DOI

2013

Microstructure level modelling for properties prediction of WC–Co cemented carbides

Materials Research Innovations

DOI

2013

Cutting Forces and Surface Roughness in High-Speed End Milling of Ti6Al4V

Key engineering materials

DOI

2013

Research on the machined surface integrity under combination of various inclination angles in multi-axis ball end milling

Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture

DOI

2013

SURFACE INTEGRITY OF HIGH-SPEED FACE MILLEDTi-6Al-4VALLOY WITH PCD TOOLS

Machining Science and Technology

DOI

2013

Failure mechanisms of graded ceramic tool in ultra high speed dry milling of Inconel 718

International Journal of Precision Engineering and Manufacturing

DOI

2013

Extended finite element modeling of crack propagation in ceramic tool materials by considering the microstructural features

Computational Materials Science

DOI

2013

Performance of graded nano-composite ceramic tools in ultra-high-speed milling of Inconel 718

The International Journal of Advanced Manufacturing Technology

DOI

2013

Random distribution model of microstructure and elastic properties prediction of WC-Co cemented carbides

Cailiao rechuli xuebao

2012

高速干铣削钛合金时涂层硬质合金刀具磨损机理研究

《摩擦学学报(中英文)》

2012

WC-Co硬质合金微观结构随机性表征

《材料工程》

2012

球头铣刀铣削斜面的三维有限元仿真研究

《硬质合金》

2012

AlCrN涂层的残余热应力分析

《硬质合金》

2012

基于数字图像技术的WC-Co硬质合金横向断裂强度预测

《硬质合金》

2012

数控编程技术及其典型应用研究

《组合机床与自动化加工技术》

2012

Failure mechanisms of a PCD tool in high-speed face milling of Ti–6Al–4V alloy

The International Journal of Advanced Manufacturing Technology

DOI

2012

Three-point bending fatigue behavior of WC–Co cemented carbides

Materials & Design (1980-2015)

DOI

2012

Effects of inclination angles on geometrical features of machined surface in five-axis milling

The International Journal of Advanced Manufacturing Technology

DOI

2011

高速铣削钛合金Ti6A4V铣削力试验研究

《组合机床与自动化加工技术》

2011

WC-Co硬质合金的弹性性能

《硬质合金》

2011

超高速切削Inconel 718刀具寿命研究及切削参数优化

《哈尔滨理工大学学报》

2011

Experimental investigation on chip morphologies in high-speed dry milling of titanium alloy Ti-6Al-4V

The International Journal of Advanced Manufacturing Technology

DOI

2011

Numerical modelling of high-speed ball end milling with cutter inclination angle

Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture

DOI

2011

Machined Surface Analysis in High-Speed Dry Milling of Ti-6Al-4V Alloy with Coated Carbide Inserts

Advanced materials research

DOI

2011

Investigation on ball end milling of P20 die steel with cutter orientation

The International Journal of Advanced Manufacturing Technology

DOI

2011

Fabrication and characterization of Sialon–Si3N4 graded nano-composite ceramic tool materials

Composites Part B Engineering

DOI

2011

Progressive tool failure in high-speed dry milling of Ti-6Al-4V alloy with coated carbide tools

The International Journal of Advanced Manufacturing Technology

DOI

2011

Machined surface roughness and chip morphology in high speed side milling of inconel 718

International Conference on Consumer Electronics, Communications and Networks (CECNet)

DOI

2011

Progressive Tool Failure in High Speed End Milling of Inconel 718 with Coated Carbide Inserts

Advanced materials research

DOI

2010

高速侧铣镍基合金Inconel 718切削力试验研究

《组合机床与自动化加工技术》