侯文彬

期刊论文

1. 张师嘉，游洁，仲俊霖，侯文彬（2026）. 基于数据驱动的汽车发动机盖行人头部碰撞安全预测方法. 《汽车工程学报》.
2. 余旭东，桑琳，侯文彬，曾岩，李刚（2026）. 变温环境下的轮胎结构-声腔理论建模及其模态参数研究. 《振动与冲击》.DOI
3. Mengdi Li, Lin Sang, J. Song, Yan Yang, Mingwu Zheng, Wenbin Hou (2026). Lightweight design and manufacturing of thermoplastic composite B-pillar for automotive under drop-weight impact. Composite structures.DOI
4. Fankuo Jin, Wenbin Hou, Lihan Wang, Hong-Yu Zhang, Lin Sang (2026). Enhanced mechanical performance, reusability and structural sensing of 3D-printed continuous carbon fiber-reinforced nylon negative stiffness honeycombs. Journal of Materials Science & Technology.DOI
5. Chang-Sheng Wang, Zhaopan Fan, Bo-Han Xing, Wenbin Hou (2026). An integrated software framework for conceptual design of vehicle body structure based on isogeometric analysis. Proceedings of the Institution of mechanical engineers. Part D, journal of automobile engineering.DOI
6. Wenbin Hou, Shuyu Lv, Yongcheng Li, Chang-Sheng Wang (2026). FEM-PINN: integrating finite element method and physics-informed neural network for performance prediction of engineering structures via graph neural network. Structural And Multidisciplinary Optimization.DOI
7. Chunning Jin, Xinyu Fu, Wenbin Hou (2026). Research on the Intelligent Design Method of Roof Frame Based on the Middle Layer and Component Technology. SAE technical papers on CD-ROM/SAE technical paper series.DOI
8. Chunning Jin, Hengyi Jin, Xinyu Fu, Wenbin Hou (2026). Construction of Car Side Panel Model Driven by Styling and General Layout. Lecture notes in mechanical engineering.DOI
9. 余旭东，黄海波，桑琳，李刚，侯文彬（2025）. 考虑接地长度的轮胎圆环建模及其振动参数研究. 《重庆理工大学学报(自然科学)》.
10. Wenbin Hou, Mengdi Li, Yan Yang, Zhifeng Liu, Lin Sang (2025). Layup optimization of composite B-pillar under side impact. International Journal of Mechanical Sciences.DOI
11. Mengdi Li, Lin Sang, Wenqi Huang, Zaiqi Yao, Wenbin Hou (2025). Mesh Stiffener Design and Optimization for Carbon Fiber‐Reinforced B‐pillar Considering Dynamic Impact. Polymer Composites.DOI
12. Yongcheng Li, Chang-Sheng Wang, Wenbin Hou (2025). A universal surrogate modeling method based on heterogeneous graph neural network for nonlinear analysis. Computer Methods in Applied Mechanics and Engineering.DOI
13. Jie You, Yonghong Zhao, Wenbin Hou, Jingfei Han, Yongcheng Li (2025). From Design Sketch to 3D Model: A Rapid Generation Method for Car Body Frame in the Conceptual Phase Based on Key Point Detection Network. Proceedings of the 2025 2nd International Conference on Big Data Analytics and Artificial Intelligence Application.DOI
14. Yongcheng Li, Chang-Sheng Wang, Shuyu Lv, Wenbin Hou (2025). StructureGraph: a universal performance evaluation method for engineering structures via heterogeneous graph neural network. Structural And Multidisciplinary Optimization.DOI
15. Zhifeng Liu, Xiao Qiang Han, Mengdi Li, Wenbin Hou (2025). Failure characteristics and mechanical behavior of rivet-bonded hybrid AL/CFRTP hat beams under low-velocity impact. Engineering Failure Analysis.DOI
16. Chao Liu, Bo Chen, Yi Guo, Xuyi Chen, Edric John Cruz Nacpil, Wenbin Hou, Rencheng Zheng (2024). Evaluation of a user-accessible countermeasure: Effect of manual dexterity gymnastics on passive driver fatigue. Transportation Research Part F-Traffic Psychology And Behaviour, Vol. 101.DOI
17. 华钧伟，侯文彬（2024）. 基于多对象离散拓扑优化方法的车身结构平台化设计. 《汽车工程》.
18. 曹榕，华钧伟，李永成，郭方俐，侯文彬（2024）. 基于数据驱动的车身结构智能设计与分析. 《汽车工程》.
19. 王长生，刘占炜，侯文彬（2024）. 基于MATLAB矢量化物质点法的车身防撞梁碰撞分析. 《计算机辅助工程》.
20. 李宝军，靳春宁，侯文彬，宋明亮，李伟东，张明恒，赵剑（2024）. 创新创业驱动的车身CAD教学模式探索. 《实验室科学》.
21. Mengdi Li, Lin Sang, Zhifeng Liu, Shibo Duan, Wenbin Hou (2024). Crashworthiness optimization of variable stiffness B-pillar with thermoplastic composites. International Journal of Mechanical Sciences.DOI
22. Pan He, Siwen Wang, Miaomiao Zhang, Lin Sang, Liyong Tong, Wenbin Hou (2024). Compression performance of 3D-printed thermoplastic auxetic structures. Thin-walled structures.DOI
23. Lin Sang, J. Xing, Junzhuo Lv, Shiyi Gao, Wenbin Hou (2024). Investigation of structure–flexural response relations in thermoplastic carbon/glass fiber‐metal laminates. Polymer Composites.DOI
24. Junzhuo Lv, Wenbin Hou, Chang-Hsia Hu, Shiyi Gao, Lin Sang, Zaiqi Yao (2024). Bending performance and failure mechanism of CFRP/Al hat-shaped thin-walled hybrid beams. Engineering Failure Analysis.DOI
25. Wenbin Hou, Yongcheng Li, Changsheng Wang (2024). FrameGraph: A Scalable Performance Evaluation Method for Frame Structure Designs Using Graph Neural Network. Journal of Mechanical Design.DOI
26. Wenbin Hou, Xinyu Wang, Jingfei Han, Zaiqi Yao, Chang-Sheng Wang (2024). An intelligent body frame structure modeling and optimization system based on conceptual design. Proceedings of the Institution of mechanical engineers. Part D, journal of automobile engineering.DOI
27. 熊志华，陈昊，王长生，岳明，侯文彬，徐斌（2023）. 基于深度强化学习的人机协作组装任务分配. 《计算机集成制造系统》.
28. 姜凯，侯文彬（2023）. 改进扩展等几何层合板孔洞边界强加Dirichlet约束. 《湖南大学学报(自然科学版)》.
29. Wenbin Hou, Mengdi Li, Xin Zhang, Zhifeng Liu, Lin Sang (2023). Design and optimization of the bumper beam with corrugated core structure of fiber metal laminate subjected to low-velocity impact. Thin-Walled Structures.DOI
30. Wenbin Hou, Zhifeng Liu, Jinjiang Shi, Xiao Qiang Han (2023). On the mechanical performance and damage evolution of rivet-bonded composite T-joint under three-point bending: A combined experimental and numerical study. Thin-Walled Structures.DOI
31. Wenbin Hou, Pan He, Yi Yang, Lin Sang (2023). Crashworthiness optimization of crash box with 3D-printed lattice structures. International Journal of Mechanical Sciences.DOI
32. Shiyi Gao, Wenbin Hou, Jianing Xing, Lin Sang (2023). Numerical and Experimental Investigation of Flexural Properties and Damage Behavior of CFRTP/Al Laminates with Different Stacking Sequence. Applied Sciences.DOI
33. 张鑫，扈长智，刘皓林，侯文彬（2022）. 纤维金属帽形结构低速冲击力学性能研究. 《重庆理工大学学报(自然科学)》.
34. 沈元星，侯文彬（2022）. 基于双曲面蜂窝夹层结构等效模型的研究及数值分析. 《计算力学学报》.
35. 姜凯，祝雪峰，侯文彬（2022）. 基于B++样条的改进扩展等几何分析对强不连续问题强加Dirichlet边界. 《中国力学大会-2021+1论文集（第一册）》.DOI
36. 张鸣鹤，熊志华，侯文彬（2022）. 复杂工程约束下基于NSGA-Ⅲ的车身梁截面优化设计. 《计算力学学报》.
37. Haolin Liu, Xinqi Ma, Lin Jiang, Lin Sang, Wenbin Hou, Zhuqing Zhang, Haihong Wu (2022). Effect of ply thickness on tensile and bending performances of carbon fiber reinforced thermoplastic unidirectional laminate. Polymer Composites.DOI
38. Kai Jiang, Xuefeng Zhu, Changzhi Hu, Wenbin Hou, Ping Hu, Stéphane Bordas (2022). An enhanced extended isogeometric analysis with strong imposition of essential boundary conditions for crack problems using B++ splines. Applied Mathematical Modelling.DOI
39. Wenbin Hou, Xianzhe Xu, Changzhi Hu, Yujia Huo, Liyong Tong (2022). Failure characteristics of composite metallic foam core hat-shaped tubular T-joints under static and impact loading. Thin-Walled Structures.DOI
40. Wenbin Hou, Yuanxing Shen, Kai Jiang, Changsheng Wang (2022). Study on mechanical properties of carbon fiber honeycomb curved sandwich structure and its application in engine hood. Composite Structures.DOI
41. Changzhi Hu, Lin Sang, Kai Jiang, Jianing Xing, Wenbin Hou (2021). Experimental and numerical characterization of flexural properties and failure behavior of CFRP/Al laminates. Composite Structures.DOI
42. Hai Rong, Ping Hu, Liang Ying, Wenbin Hou, Minghua Dai (2021). Modeling the anisotropic plasticity and damage of AA7075 alloy in hot forming. International Journal of Mechanical Sciences.DOI
43. Mingzhi Li, Lin Sang, Zhihua Xiong, Wenbin Hou (2021). Design and optimisation of vehicle frontal bumper beam with alternative carbon fibre-reinforced plastics in corrugated sandwich structure. International Journal of Crashworthiness.DOI
44. Wenbin Hou, LI Jian-hua, Lin Sang, Liang Ying, Xiao Qiang Han (2021). On the mechanical performance of honeycomb-core sandwich L-joint under bending load: an experimental-numerical study. Journal of Adhesion Science and Technology.DOI
45. Hai Rong, Liang Ying, Ping Hu, Wenbin Hou (2021). Characterization on the thermal anisotropic behaviors of high strength AA7075 alloy with the Yld2004-18p yield function. Journal of Alloys and Compounds.DOI
46. Yu Ze Jiang, Shengfa Wang, Heting Wang, Baojun Li, Wenbin Hou (2021). Crashworthiness Design of Thin-Walled Tubes Reinforced by Triply Periodic Minimal Surfaces. 3D Printing and Additive Manufacturing.DOI
47. Wenbin Hou, Kai Jiang, Xuefeng Zhu, Yuanxing Shen, Ping Hu (2021). Extended isogeometric analysis using B++ splines for strong discontinuous problems. Computer Methods in Applied Mechanics and Engineering.DOI
48. 赵永宏，李永成，陈东，侯文彬（2020）. 基于改进图分解法的多材料车身结构优化设计方法. 《汽车工程》.
49. 陈东，赵永宏，侯文彬，汪芳胜，李晓龙（2020）. 基于多模型拓扑优化方法的车身结构概念设计. 《计算机辅助工程》.DOI
50. 耿富荣，朱晋甫，赵永宏，李健华，侯文彬（2020）. 基于塑性铰理论的车身概念设计正碰分析与优化方法. 《计算力学学报》.
51. 荣海，盈亮，胡平，侯文彬（2020）. 基于连续介质损伤力学的7075铝合金高温成形极限理论预测与数值仿真. 《机械工程学报》.
52. 袁焕泉，王增飞，赵永宏，侯文彬（2020）. 基于可制造性约束的车身变截面梁关联优化设计. 《机械设计》.DOI
53. Liang Ying, Tianhan Gao, Wenbin Hou, Minghua Dai, Xiao Qiang Han, Di Jiang (2020). On crashing behaviors of bio-inspired hybrid multi-cell Al/CFRP hierarchical tube under quasi-static loading: An experimental study. Composite Structures.DOI
54. Xingshuang Peng, Miaomiao Zhang, Zhengchuan Guo, Lin Sang, Wenbin Hou (2020). Investigation of processing parameters on tensile performance for FDM-printed carbon fiber reinforced polyamide 6 composites. Composites Communications.DOI
55. Xu Gao, Miaomiao Zhang, Yaodong Huang, Lin Sang, Wenbin Hou (2020). Experimental and numerical investigation of thermoplastic honeycomb sandwich structures under bending loading. Thin-Walled Structures.DOI
56. Wenbin Hou, Kai Jiang, Xuefeng Zhu, Yuanxing Shen, Yongcheng Li, Xiangkui Zhang, Ping Hu (2020). Extended Isogeometric Analysis with strong imposing essential boundary conditions for weak discontinuous problems using B++ splines. Computer Methods in Applied Mechanics and Engineering.DOI
57. Wenbin Hou, Xianzhe Xu, Lin Sang, Liyong Tong (2020). Failure of single hat-shaped thin-walled tubular composite T-joints under impact loading. Thin-Walled Structures.DOI
58. Yundong Gai, Xuefeng Zhu, Yongjie Jessica Zhang, Wenbin Hou, Ping Hu (2020). Correction to: Explicit isogeometric topology optimization based on moving morphable voids with closed B-spline boundary curves. Structural and Multidisciplinary Optimization.DOI
59. Xiao Qiang Han, Ganiy Akhmet, Ping Hu, Wenbin Hou, Yermek Baubekov, Mazhit Akhmetov (2020). Numerical prediction on the mechanical degradation of adhesively bonded corrugated sandwich beam after hygrothermal ageing. Composite Structures.DOI
60. Changsheng Wang, Xiao Qiang Han, Caixia Yang, Xiangkui Zhang, Wenbin Hou (2020). Assumed stress quasi-conforming formulation for static and free vibration analysis of symmetric laminated plates. Engineering Computations.DOI
61. 侯文彬（2019）. 车身结构概念设计理论与方法.
62. 许现哲，刘通，王文丽，侯文彬（2019）. 碳纤维增强聚合物复合材料车身T型接头静态性能与失效机制. 《复合材料学报》.DOI
63. 侯文彬，刘璟琳，陈广义，韩啸，徐翔，郑文献（2019）. 胶层缺陷对胶接-拉铆搭接剪切接头力学性能影响研究. 《机械工程学报》.
64. 王海丰，于野，许现哲，侯文彬（2019）. 车身碳纤维接头结构横向弯曲性能研究. 《汽车工程》.DOI
65. Ye Hong Yu, Wenbin Hou, Ping Hu, Huihui Yang, Xiuxian Jia (2019). Failure analysis and bending performance of carbon fiber composite sandwich structures with corrugated cores. Journal of Sandwich Structures & Materials.DOI
66. Yundong Gai, Xuefeng Zhu, Yongjie Jessica Zhang, Wenbin Hou, Ping Hu (2019). Explicit isogeometric topology optimization based on moving morphable voids with closed B-spline boundary curves. Structural and Multidisciplinary Optimization.DOI
67. Wenbin Hou, Xianzhe Xu, Xiao Qiang Han, Haifeng Wang, Liyong Tong (2019). Multi-objective and multi-constraint design optimization for hat-shaped composite T-joints in automobiles. Thin-Walled Structures.DOI
68. Liang Ying, Tianhan Gao, Hai Rong, Xiao Qiang Han, Ping Hu, Wenbin Hou (2019). On the thermal forming limit diagram (TFLD) with GTN mesoscopic damage model for AA7075 aluminum alloy: Numerical and experimental investigation. Journal of Alloys and Compounds.DOI
69. Lin Sang, Yingying Wang, Chuo Wang, Xingshuang Peng, Wenbin Hou, Liyong Tong (2019). Moisture diffusion and damage characteristics of carbon fabric reinforced polyamide 6 laminates under hydrothermal aging. Composites Part A Applied Science and Manufacturing.DOI
70. Hai Rong, Ping Hu, Liang Ying, Wenbin Hou, Jinghuang Zhang (2019). Thermal forming limit diagram (TFLD) of AA7075 aluminum alloy based on a modified continuum damage model: Experimental and theoretical investigations. International Journal of Mechanical Sciences.DOI
71. Xiao Qiang Han, Shaoqiang Hou, Liang Ying, Wenbin Hou, Husniddin Aliyev (2019). On the fracture behaviour of adhesively bonded CFRP hat-shaped thin-walled beam under axial crushing load: An experimental and modelling study. Composite Structures.DOI
72. Lin Sang, Shuangfeng Han, Zhipeng Li, Xiao‐Li Yang, Wenbin Hou (2019). Development of short basalt fiber reinforced polylactide composites and their feasible evaluation for 3D printing applications. Composites Part B Engineering.DOI
73. Wenbin Hou, Jinglin Liu, CHEN Guangyi, Xiao Qiang Han, Xu Xiang, ZHENG Wenxian (2019). Effect of Defects in Adhesive Layer on the Mechanical Property of Hybrid Bond-Riveted Lap Shear Joint. Journal of Mechanical Engineering.DOI
74. 许现哲，刘通，王文丽，侯文彬（2018）. 碳纤维车身T型接头静态失效机理的研究. 《2018年全国固体力学学术会议摘要集（上）》.
75. 单春来，李永成，侯文彬（2018）. 基于模块化设计的车身装配结构优化. 《汽车工程》.
76. 赵曦，陈帅，盈亮，侯文彬，胡平（2018）. 梯度强度汽车薄壁结构抗撞性优化. 《汽车工程》.
77. Lin Sang, Chuo Wang, Yingying Wang, Wenbin Hou (2018). Effects of hydrothermal aging on moisture absorption and property prediction of short carbon fiber reinforced polyamide 6 composites. Composites Part B Engineering.DOI
78. Lin Sang, Guojun Zheng, Wenbin Hou, Xiao-Li Yang, Zhiyong Wei (2018). Crystallization and mechanical properties of basalt fiber-reinforced polypropylene composites with different elastomers. Journal of Thermal Analysis and Calorimetry.DOI
79. Wenbin Hou, Xianzhe Xu, Haifeng Wang, Liyong Tong (2018). Bending behavior of single hat-shaped composite T-joints under out-of-plane loading for lightweight automobile structures. Journal of Reinforced Plastics and Composites.DOI
80. Xiao Qiang Han, Yong Jin, Wei Zhang, Wenbin Hou, Ye Yu (2018). Characterisation of moisture diffusion and strength degradation in an epoxy-based structural adhesive considering a post-curing process. Journal of Adhesion Science and Technology.DOI
81. 侯文彬，侯少强，韩啸（2017）. 基于多层次优化的碳纤维复合材料电池箱设计. 《第19届亚太汽车工程年会暨2017中国汽车工程学会年会论文集》.
82. 杨星，于野，张伟，侯文彬（2017）. 基于三维多胞结构的汽车吸能盒优化设计. 《大连理工大学学报》.
83. Jinting Xu, Wenbin Hou, Hongzhe Zhang (2017). An improved virtual edge approach to slicing of point cloud for additive manufacturing. Computer-Aided Design and Applications.DOI
84. Ganiy Akhmet, Ye Yu, Ping Hu, Wenbin Hou, Xiao Qiang Han (2017). Analysis of the performance of adhesively bonded corrugated core sandwich structures using cohesive zone method. Journal of Sandwich Structures & Materials.DOI
85. Ye Hong Yu, Liang Ying, Wenbin Hou, Ping Hu, Xiuxian Jia, Ganiy Akhmet (2017). Failure analysis of adhesively bonded steel corrugated sandwich structures under three-point bending. Composite Structures.DOI
86. Wenbin Hou, Yundong Gai, Xuefeng Zhu, Xuan Wang, Chao Zhao, Longkun Xu, Kai Jiang, Ping Hu (2017). Explicit isogeometric topology optimization using moving morphable components. Computer Methods in Applied Mechanics and Engineering.DOI
87. Jinting Xu, Wenbin Hou, Yuwen Sun, Yuan‐Shin Lee (2017). PLSP based layered contour generation from point cloud for additive manufacturing. Robotics and Computer-Integrated Manufacturing.DOI
88. Wenbin Hou, Xing Hua Yang, Wei Zhang, Yang Xia (2017). Design of energy-dissipating structure with functionally graded auxetic cellular material. International Journal of Crashworthiness.DOI
89. Wenbin Hou, Chunlai Shan, Ping Hu, Hongzhe Zhang (2017). Multilevel optimisation method for vehicle body in conceptual design. International Journal of Vehicle Design.DOI
90. 韩小强，王洪宇，侯文彬（2016）. 基于FSAE赛车的空气动力学套件设计及CFD分析. 《实验科学与技术》.
91. 韩小强，盈亮，王琪，高天涵，胡平，侯文彬（2016）. 车辆工程大学生创新实践基地建设与实践. 《实验室科学》.
92. Xiangkui Zhang, Chunning Jin, Ping Hu, Xuefeng Zhu, Wenbin Hou, Jinting Xu, Changsheng Wang, Yuewei Zhang, Zheng-Dong Ma, Holly Smith (2016). NURBS modeling and isogeometric shell analysis for complex tubular engineering structures. Computational and Applied Mathematics.DOI
93. 韩啸，李伟东，胡平，侯文彬（2015）. 结构胶接接头在湿-热-力耦合环境下的力学性能退化行为建模研究. 《中国力学大会-2015》.
94. 侯文彬，王飞，侯大军（2015）. 概念设计阶段车身装配结构多目标优化设计. 《中国力学大会-2015》.
95. 张伟，侯文彬，胡平（2015）. 新型负泊松比多孔吸能盒平台区力学性能. 《复合材料学报》.
96. 侯文彬，侯大军，徐金亭，张伟（2015）. 基于车身装配结构优化的改进图分解算法. 《应用数学和力学》.
97. Lei Yang, Baojun Li, Zhangquan Lv, Wenbin Hou, Ping Hu (2015). Finite element mesh deformation with the skeleton-section template. Computer-Aided Design.DOI
98. 张伟，侯文彬，胡平（2014）. 基于拓扑优化的电动汽车白车身优化设计. 《湖南大学学报(自然科学版)》.
99. Wei Zhang, Wenbin Hou, Ping Hu, Zheng-Dong Ma (2014). RETRACTED: The Nonlinear Compressive Response and Deformation of an Auxetic Cellular Structure under In-Plane Loading. Advances in Mechanical Engineering.DOI
100. Jinting Xu, Jianhuang Wu, Wenbin Hou (2014). Parts Localization Oriented Practical Method for Point Projection on Model Surfaces Based on Subdivision. Computer-Aided Design and Applications.DOI
101. 侯文彬，张红哲，徐金亭，呼和（2013）. 基于概念设计的客车车身结构设计与优化系统. 《湖南大学学报(自然科学版)》.
102. Wenbin Hou, Hongzhe Zhang, Da-jun Hou, Ping Hu (2013). Intelligent design of mechanical parameters of the joint in vehicle body concept design model. AIP conference proceedings.DOI
103. 李晓东，常颖，赵剑，侯文彬，余树洲，胡平，韩小强（2012）. 实验情境下车辆工程专业英语课程改革的探索. 《实验科学与技术》.
104. 郭润清，侯文彬，胡平，姜兆娟（2012）. 车身轻量化中梁截面优化的研究与实现. 《汽车工程》.
105. 胡平，郭润清，侯文彬，姜兆娟（2011）. 概念车身梁截面厚度优化设计. 《汽车技术》.
106. 韩啸，侯文彬，毕振军，胡平（2011）. 车身骨架梁结构材料刚度特性的理论解析与数值模拟. 《第七届中国CAE工程分析技术年会暨2011全国计算机辅助工程（CAE）技术与应用高级研讨会论文集》.
107. 韩啸，侯文彬，胡平（2011）. 车身薄壁梁结构刚度特性的仿真研究. 《汽车技术》.
108. 刘宝越，侯文彬，张红哲，胡平（2011）. 车身结构概念设计系统多目标优化模块设计. 《农业机械学报》.
109. 李晓东，赵剑，侯文彬，余树洲，胡平，韩小强（2011）. 车辆工程专业多层次开放式实验教学体系的构建. 《实验技术与管理》.
110. Wenbin Hou, Hongzhe Zhang, Wei Zhang, Ping Hu (2011). Rapid structural property evaluation system for car body advanced design. International Journal of Vehicle Design.DOI
111. Xiao Qiang Han, Wenbin Hou, Ping Hu (2011). Theoretical and Numerical Analysis on Material-Stiffness Characteristics for Thin-Walled Beams on Vehicles.DOI
112. 潘星辰，侯文彬，张雨，刘斌，胡平（2010）. 车身概念设计中接头部件的模拟. 《计算力学学报》.
113. 张红哲，张树仁，侯文彬（2010）. 基于梁单元的车身结构性能快速评估系统的开发. 《机械设计与制造》.
114. 迟瑞丰，胡平，侯文彬（2010）. 概念设计阶段的车身结构分析. 《汽车工程》.
115. 刘宝越，侯文彬，刘斌，迟瑞丰，胡平（2010）. 轿车前风窗洞口变形优化研究. 《机械设计与制造》.
116. 侯文彬，张红哲，迟瑞丰，胡平（2009）. 车身结构概念设计集成系统的实现. 《计算机集成制造系统》.
117. 邢子敬，侯文彬，刘斌，张雨，胡平（2009）. 概念设计中梁截面对车身刚度影响的研究. 《汽车技术》.
118. 迟瑞丰，胡平，侯文彬（2009）. 车身概念设计系统的开发及关键技术. 《汽车技术》.
119. 迟瑞丰，侯文彬，胡平（2009）. 接头在车身结构概念设计阶段对刚度的影响. 《机械设计与制造》.
120. Wenbin Hou, H. Z. Zhang, R. F. Chi, Ping Hu (2009). Development of an intelligent CAE system for auto-body concept design. International Journal of Automotive Technology.DOI
121. Ruifeng Chi, Wenbin Hou, Ping Hu (2009). Section database management system for intelligent design of concept vehicle body. IEEE Intelligent Vehicles Symposium.DOI
122. Hongzhe Zhang, Shuren Zhang, Ping Hu, Wenbin Hou (2009). An intelligent system based on optimization for car body design. IEEE Intelligent Vehicles Symposium.DOI
123. Wenbin Hou, Hongzhe Zhang, Ping Hu, Shuhua Guo (2009). A Flexible CBR Tool for Intelligent System of Vehicle Body Conceptual Design. International Workshop on Intelligent Systems and Applications (ISA).DOI
124. 胡平，张向奎，申国哲，侯文彬，靳春宁，郭威（2007）. 专用计算力学软件自主开发与平台建设的若干问题. 《庆祝中国力学学会成立50周年暨中国力学学会学术大会’2007论文摘要集（上）》.
125. 侯文彬，胡平，刘大有，丁袆（2006）. 基于知识的车身结构概念设计工具——IVCD. 《吉林大学学报(工学版)》.
126. 蔡世民，侯文彬，胡平，付争春（2006）. 检具底座变形量CAE分析研究. 《机械制造》.
127. 张红哲，侯文彬（2004）. 一种轴对称结构强度可靠性分析算法. 《长春理工大学学报(自然科学版)》.
128. 张红哲，侯文彬，胡平，李运兴（2003）. 模具装配中求解约束的自由度分析算法. 《机械设计与制造》.
129. 张红哲，侯文彬，胡平，李运兴（2002）. 虚拟装配设计中求解约束的几何推理法. 《2002年中国机械工程学会年会》.

预印本

1. Kai Jiang, Xiangjun Dai, Jilei Zhou, Wen Luh Yang, Wenbin Hou, Xuefeng Zhu (2025). Extended Isogeometric Analysis for Discontinuous Problems with Inclusions and Holes Using B++ Splines. SSRN Electronic Journal.DOI
2. Lin Sang, Feifan Wang, Fankuo Jin, Feiyue Zhang, Wenbin Hou (2024). 4d Printing of Continuous Carbon Fiber Reinforced Composites with Magneto-/Electro-Induced Shape Memory Effect. SSRN Electronic Journal.DOI

书籍章节

1. Hai Rong, Liang Ying, Ping Hu, Wenbin Hou (2021). A Novel Continuum Damage Constitutive Model for Predicting the Formability of AA7075 Alloy at Elevated Temperatures. ˜The œminerals, metals & materials series.DOI