张彦敏｜河南科技大学｜学者主页

2026

Cu-Fe合金塑性研究进展

周仕康，张彦敏，薛向阳，刘飞跃，王震，徐耀科

《塑性工程学报》

2026

Si-Ni、Si-Ag添加对Cu-7Fe合金凝固组织与性能影响

刘飞跃，冯江，张彦敏，薛向阳，周仕康，王震，徐耀科

《特种铸造及有色合金》

2026

Effect of Ag microalloying on deformation heterogeneity and substructure evolution in cryorolled Cu-6.2 wt% Fe alloys

Xiangyang Xue, Yanmin Zhang, Feiyue Liu, S.H. Zhou, Hao Chen, Kexing Song

Journal of Alloys and Compounds

DOI

2026

Study on microstructure, properties and precipitation kinetics of Cu-3Ti-1.2 Mg alloy under three-stage aging

Yanmin Zhang, Zhen Wang, Yaoke Xu, FeiYue Liu, Shikang Zhou, Xiangyang Xue, Chengchao Niu, Kexing Song, Jiang Feng

Materials Characterization

DOI

2026

Effect of Ag and Al Additions on the Strength and Plasticity of As-Cast Cu-7Fe Alloy Based on First-Principles Calculations

S.H. Zhou, Yanmin Zhang, FeiYue Liu, Xiangyang Xue, Kexing Song, Zhen Wang, YaoKe Xu, Miaomiao Wang

JOM

DOI

2026

Effect of Mg addition on the microstructure, properties, and precipitation behavior of Cu-3Ti alloy

Zhen Wang, Yanmin Zhang, YaoKe Xu, FeiYue Liu, S.H. Zhou, Xiangyang Xue, Chengchao Niu, Jiang Feng, Kexing Song

Journal of Alloys and Compounds

DOI

2026

Effect of Zr Element Addition on the Microstructure and Properties of Cu-3Ti Alloy

Yanfang Ma, Xiaowen Peng, Bin Yang, Yanmin Zhang, Yunxiao Hua, Haitao Liu, Tao Huang, Kexing Song

Journal of Materials Engineering and Performance

DOI

2025

高性能Cu-Ni-Si系合金成分设计与性能研究进展

冯江，张彦敏，周延军，赵世恒，单运启，宋克兴

《材料热处理学报》

2025

冷轧态Cu-3Ti合金的时效工艺分析及析出动力学

徐耀科，张彦敏，王震，冯江，刘飞跃，周仕康，薛向阳，马艳芳

《材料热处理学报》

2025

Cr含量对固溶态Cu-Ni-Co-Si-Mg合金组织性能的影响

赵世恒，冯江，张彦敏，张朝民，赵培峰，单运启，皇保欢，宋克兴

《材料热处理学报》

2025

Cu-Ni-Cr系合金研究现状与发展趋势

葛文哲，曹书光，张彦敏，秦亚楠，陈文利，赵傲威，宋克兴，王强松

《中南大学学报(自然科学版)》

2025

微量稀土铈对含硫纯铜热变形行为的影响（英文）

宋克兴，华云筱，刘海涛，张彦敏，张朝民，周延军，皇涛

Transactions of Nonferrous Metals Society of China

2025

断路器自力型触指通流能力提升研究与分析

范艳艳，苗晓军，张彦敏，国秀花，李闪光，许东杰，李凯，郝留成，钟建英

《高压电器》

DOI

2025

晶界工程对微合金化纯铜导电性和热稳定性的影响

梁十军，刘海涛，张彦敏，宋克兴，郭慧稳，郭引刚

《特种铸造及有色合金》

DOI

2025

Comparative Study on Deformation Characteristics of Single Crystal Copper and Polycrystalline Copper Micro Wires

Hanjiang Wu, Tao Huang, Ke-Xing Song, Yan-Jun Zhou, Shao-Lin Li, Yanmin Zhang, Y. Hua, Xiao-Lan Peng, Dejiang Yu, Yan Wang, Mei Lu, Wenjing Zhang

Vacuum

DOI

2025

Evolution characteristics of microstructure during continuous drawing deformation of Cu-20Ag alloy

Hanjiang Wu, Tao Huang, Ke-Xing Song, Yan-Jun Zhou, Shao-Lin Li, Yanmin Zhang, Xiao-Lan Peng, Y. Hua

Journal of Materials Research and Technology

DOI

2025

Effect of Cr addition on microstructure and properties of Cu-Ni-Co-Si-Mg alloys

Yanmin Zhang, Zhen Wang, Shiheng Zhao, Jiang Feng, Kexing Song, YaoKe Xu, FeiYue Liu, S.H. Zhou, XiangYang Xue, Chengchao Niu

Journal of Alloys and Compounds

DOI

2025

Synergistic Enhancement of Strength, Plasticity, and Electrical Conductivity in Cu–3Ti Alloy: Process Optimization and Mechanism Analysis

Zhen Wang, Yanmin Zhang, Yingchao Xu, Jiang Feng, Kexing Song, Feiyue Liu, Shikang Zhou, Xiangyang Xue, Yanfang Ma

Advanced Engineering Materials

DOI

2025

Microstructural evolution of C1720W microfilament for fuzz buttons during service

Yanmin Zhang, Yunqi Shan, Yaopeng Yang, Zaoli Zhang, Yanjun Zhou, Xiuhua Guo, Tao Huang, Kexing Song

Materials Today Communications

DOI

2025

Mechanism of Cr enhancement on stress relaxation resistance in Cu–Ni–Co–Si–Mg alloys

Shiheng Zhao, Feng Jiang, Yanmin Zhang, Chaomin Zhang, Yunqi Shan, Baohuan Huang, Yaopeng Yang, Hao Jiang, Wenhao Yang, Kexing Song

Journal of Alloys and Compounds

DOI

2024

形变热处理对Cu-Ni-Si合金组织性能的影响

单运启，张彦敏，张朝民，刘爱奎，冯江，赵世恒，皇保欢，宋克兴，周延军

《材料热处理学报》

2024

微合金化元素对纯铜热稳定性和导电性的影响

梁十军，刘海涛，张彦敏，宋克兴，郭慧稳，郭引刚

《材料热处理学报》

2024

热浸镀锡电子铜带材回流焊过程中镀锡层的微观结构及缺陷分析

欧阳豫鲁，张国赏，柳亚辉，朱倩倩，宋克兴，皇涛，张彦敏，刘栋

《材料热处理学报》

2024

均匀化退火对Cu-Ni-P合金组织和性能的影响

皇保欢，张彦敏，李吉宝，杨耀鹏，高红姣，冯江，张朝民，宋克兴

《材料热处理学报》

2024

线径压缩率对微细铜线材拉拔变形的影响（英文）

皇涛，吴捍疆，宋克兴，张彦敏，周延军，李韶林

Transactions of Nonferrous Metals Society of China

2024

Cu-4Ag合金微细丝拉拔极限预测模型

张学宾，谷继华，封存利，鲁龙龙，张彦敏，宋克兴，皇涛

《塑性工程学报》

2024

The influences of Cr and Mn on the strength, electrical conductivity, and stress relaxation properties of Cu-Ni-Si-Co-Mg alloys

Jiang Feng, Yanmin Zhang, Yanjun Zhou, Shiheng Zhao, Yunqi Shan, Yaopeng Yang, Kexing Song

Materials Today Communications

DOI

2024

Influence of different rolling passes and deformation amounts on the microstructure evolution and strengthening mechanism of Cu–Ni–Si alloy

Yunqi Shan, Chaomin Zhang, Yanmin Zhang, Feng Jiang, Shiheng Zhao, Baohuan Huang, Kexing Song, Yanjun Zhou

Journal of Materials Research and Technology

DOI

2024

Study of the stress relaxation resistance and microstructural evolution of a Cu–Ni–Si alloy strip

Yanmin Zhang, Yaopeng Yang, Yaoli Wang, Zaoli Zhang, Feng Jiang, Chaomin Zhang, Kexing Song

Journal of Materials Research and Technology

DOI

2024

Study on the microstructure and mechanism of stress relaxation behavior of Cu–Ni–Si alloy by two-stage rolling deformation

Yunqi Shan, Yanmin Zhang, Chaomin Zhang, Feng Jiang, Baohuan Huang, Shiheng Zhao, Kexing Song

Materials Science and Engineering A

DOI

2024

Effects of cold deformation and aging on the phase transformation and mechanical properties of a Cu-15Ni-8Sn alloy

Jiang Kai-xuan, Yanjun Zhou, Ran Yang, Kexing Song, Liu Ya-Hui, Yanmin Zhang, Yang Shao-dan, Fei Zhou, Kuan Huang, Liu Dongdong, Yang Wen-Hao

Materials Characterization

DOI

2024

Effects of electrical pulse on metal deformation behaviors

Tao Huang, Fan Yang, Binghui Xing, Kexing Song, Nan Xiang, Yanmin Zhang, Xue-Wen Chen, Guo Jun-qing

Materials Research Express

DOI

2024

Influence of Key Material Parameters and Loading Path on Fatigue Failure Behaviors of Corrugated Tubes

Tao Huang, Yu-ning Jiang, Mu Qiao, Kexing Song, Fan Yang, Xuebin Zhang, Nan Xiang, Yanmin Zhang

JOM

DOI

2024

Mechanism of the synergistic effect of solid solution strengthening and fine grain strengthening in an as-cast Cu–9Ni–6Sn alloy induced by Mn

Fei Zhou, Yanjun Zhou, Kexing Song, Ran Yang, Yanmin Zhang, Longlong Lu, Shaodan Yang, Yan Yu, Xiangpeng Meng, Jidong Chen, Wenhao Yang

Materials Science and Engineering A

DOI

2023

固溶和时效对挤压态Cu-15Ni-8Sn合金组织和性能的影响

姜凯旋，周延军，宋克兴，杨冉，郁炎，柳亚辉，张彦敏，陈纪东，黄宽，刘东东，余勃

《材料热处理学报》

2023

Y对铸态Cu-15Ni-8Sn合金性能及Sn元素分布的影响

刘东东，苏娟华，杨冉，周延军，张彦敏，柳亚辉，张朝民，郁炎，陈纪东，黄宽，姜凯旋，余勃

《材料热处理学报》

2023

电流辅助成形中位错演化行为研究进展

肖志涛，皇涛，邢兵辉，陈拂晓，宋克兴，郭俊卿，张彦敏

《塑性工程学报》

2023

Evolution of grain characteristics and dynamic recrystallization behavior of Cu–15Ni–8Sn alloy under different extrusion ratios

Kuan Huang, Yanmin Zhang, Yanjun Zhou, Ran Yang, Xiangpeng Meng, Ji-dong Chen, Xuebin Zhang, Jiang Kai-xuan, Dongdong Liu

Journal of Materials Research and Technology

DOI

2023

Nanophase transformation and strengthening - Toughening mechanism of the Cu–15Ni–8Sn alloy during aging

Jiang Kai-xuan, Yanjun Zhou, Ran Yang, Kexing Song, Liu Ya-hui, Yanmin Zhang, Yang Shao-dan, Fei Zhou, Kuan Huang, Liu Dong-dong, Yang Wen-hao

Journal of Materials Research and Technology

DOI

2023

Effect of Low-Temperature Annealing on the Bending Properties of C19400 Copper Alloy Strips

Hongjiao Gao, Yanmin Zhang, Kexing Song, Yanjun Zhou, Fei Zhou, Aikui Liu

Journal of Materials Engineering and Performance

DOI

2022

Cu-15Ni-8Sn合金热变形行为及热加工图

黄宽，张彦敏，周延军，杨冉，柳亚辉，郁炎，陈纪东，姜凯旋，刘东东

《材料热处理学报》

2022

不同变形量对Cu-2Ag合金组织和性能的影响

周菲，张彦敏，宋克兴，高红姣

《锻压技术》

2022

C19400铜合金带材折弯性能分析

高红姣，张彦敏，周菲，周延军，苏娟华，胡铜生，洪小兵，刘爱奎

《河南科技大学学报(自然科学版)》

2022

氯离子质量浓度及电场强度对电解铜箔性能的影响

代明伟，胡浩，宋克兴，程浩艳，卢伟伟，张彦敏，徐静，冯庆，杨祥魁

《河南科技大学学报(自然科学版)》

2022

热型连铸固液界面影响效应的研究进展

吴捍疆，宋克兴，张彦敏，封存利，周延军，吴保安，陈鼎彪

《热加工工艺》

2022

退火温度对C19400合金组织性能和残余应力的影响

李闪光，张彦敏，宋克兴，周菲，鲁龙龙，刘爱奎

《材料热处理学报》

2022

Effect of Stretch-Bending Straightening on the Residual Stress of C19400 Alloy Strips

Yanmin Zhang, Shanguang Li, Kexing Song, Yanjun Zhou, Fei Zhou, Longlong Lu, Aikui Liu

Journal of Materials Engineering and Performance

DOI

2022

Effects of a thermal-ultrasonic stress relaxation process on the residual stress, mechanical properties and microstructures of C19400 copper alloy strips

Fei Zhou, Yanmin Zhang, Longlong Lu, Kexing Song, Hongjiao Gao

Materials Science and Engineering A

DOI

2021

短时低温退火对Cu-2.1Fe-0.03P合金板材组织和性能的影响

李闪光，张彦敏，范俊玲，宋克兴，牛立业，郭慧稳，鲁龙龙，周菲，高红姣

《材料热处理学报》

DOI

2021

基于响应曲面法的QCr0.5铜合金热挤压冲头磨损数值分析

张帅帅，张彦敏，韩文奎，赵培峰，葛学元

《塑性工程学报》

2020

时效时间对Cu-3.5Ag合金性能及其纳米析出相特征的影响

郭保江，周延军，张彦敏，孔令宝，康军伟，宋克兴，曹军，周志云

《材料热处理学报》

DOI

2018

含Ti镍铝青铜合金的人工海水冲蚀行为

乔景振，田保红，宋克兴，周延军，张毅，张彦敏

《金属热处理》

2018

稀土元素La对Zn-Cu-Ti-Mg合金组织和性能的影响

李红霞，宋克兴，张彦敏，田保红，任凤章，王宇飞

《金属热处理》

2017

Cu-Al2O3（0.68%）弥散强化铜合金塑性变形特性

张彦敏，王永健，陈赛，甘春雷，王云飞，宋克兴

《精密成形工程》

2017

稀土对挤压态Cu-7Ni-7Al-2Fe-2Mn合金耐蚀性能影响

李晓孟，张彦敏，国秀花，宋克兴，李周，米绪军

《中国稀土学报》

2017

Al2O3/Cu弥散强化铜合金应力松弛行为

赵亚永，张彦敏，宋克兴

《河南科技大学学报(自然科学版)》

2015

热处理对变形Zn-Cu-Ti合金组织和性能的影响

乔艳艳，宋克兴，张彦敏，罗钧，李伟文

《河南科技大学学报(自然科学版)》

2015

热处理对Cu-0.23Be-0.84Co合金性能和组织的影响

李宁宁，宋克兴，周延军，张彦敏，何霞

《河南科技大学学报(自然科学版)》

2015

自力型触指用高强高导铜合金带材的制备工艺

李红霞，张彦敏，宋克兴，田保红

《金属热处理》

2015

时效对Cu-0.33Cr-0.06Zr合金导电率与硬度的影响

白宁，张彦敏，宋克兴，李宁宁，何霞

《金属热处理》

2014

TiB2含量对弥散强化TiB2/Cu复合材料抗电蚀性能的影响

李红霞，王国强，宋克兴，张彦敏，国秀花

《金属热处理》

2014

Cu-0.23Be-0.84Co合金熔铸工艺及组织性能研究

何霞，张彦敏，宋克兴，周延军，李宁宁，赵培峰

《铸造技术》

2014

Zn-0.9Cu-0.026Ti合金的组织和性能

邓猛，贾淑果，宋克兴，张彦敏，李伟文，谢从相

《材料热处理学报》

2014

铜/铝固-液复合研究

宋克兴，张亚，张彦敏，国秀花

《铸造》

2013

SPS法制备弥散强化铜基复合材料的组织和性能

李红霞，宋克兴，张彦敏，国秀花

《热加工工艺》

2013

直流电流对Cu-0.86Cr合金电导率及时效速率的影响

张彦敏，王国为，宋克兴，李红霞，王青

《特种铸造及有色合金》

DOI

2013

稀土气氛对内氧化法制备铜基复合材料的影响

张亚，宋克兴，王青，张彦敏

《特种铸造及有色合金》

DOI

2013

Effect of the Thermal Expansion Characteristics of Reinforcements on the Electrical Wear Performance of Copper Matrix Composite

Xiuhua Guo, Kexing Song, Shuhua Liang, Xu Wang, Yanmin Zhang

Tribology Transactions

DOI

2013

Cu-10Sn-4Ni-3Pb alloy prepared by crystallization under pressure: An experimental study

Kexing Song, Yanjun Zhou, Peifeng Zhao, Yanmin Zhang, Ning Bai

Acta Metallurgica Sinica (English Letters)

DOI

2012

新型耐磨锡青铜合金包套挤压工艺及组织性能(英文)

赵培峰，周延军，宋克兴，张彦敏

《塑性工程学报》

2012

直流电流下时效对Cu-0.86Cr合金力学性能的影响

王国为，张彦敏，宋克兴，李红霞，王青

《特种铸造及有色合金》

2012

Microstructure and properties of wear-resisting Cu-Sn-Pb-Ni alloy prepared by canning extrusion process

Peifeng Zhao, Zhou Yanjun, Song Kexing, Yanmin Zhang

Suxing gongcheng xuebao

2010

形变热处理对Cu-1.0Cr合金组织及性能的影响

刘卫锋，宋克兴，张彦敏，赵培峰，国秀花

《特种铸造及有色合金》

2008

紫铜三通管轴压胀形数值模拟及验证

张彦敏，宋志真，贺俊光，孙爱学

《锻压技术》

1999

LCT铜合金的研制及在压铸模压射头上的应用

龚红英，罗晨苗，陈学文，张彦敏

《材料开发与应用》

精选作品

期刊论文

Cu-Fe合金塑性研究进展

Si-Ni、Si-Ag添加对Cu-7Fe合金凝固组织与性能影响

Effect of Ag microalloying on deformation heterogeneity and substructure evolution in cryorolled Cu-6.2 wt% Fe alloys

Study on microstructure, properties and precipitation kinetics of Cu-3Ti-1.2 Mg alloy under three-stage aging

Effect of Ag and Al Additions on the Strength and Plasticity of As-Cast Cu-7Fe Alloy Based on First-Principles Calculations

Effect of Mg addition on the microstructure, properties, and precipitation behavior of Cu-3Ti alloy

Effect of Zr Element Addition on the Microstructure and Properties of Cu-3Ti Alloy

高性能Cu-Ni-Si系合金成分设计与性能研究进展

冷轧态Cu-3Ti合金的时效工艺分析及析出动力学

Cr含量对固溶态Cu-Ni-Co-Si-Mg合金组织性能的影响

Cu-Ni-Cr系合金研究现状与发展趋势

微量稀土铈对含硫纯铜热变形行为的影响（英文）

断路器自力型触指通流能力提升研究与分析

晶界工程对微合金化纯铜导电性和热稳定性的影响

Comparative Study on Deformation Characteristics of Single Crystal Copper and Polycrystalline Copper Micro Wires

Evolution characteristics of microstructure during continuous drawing deformation of Cu-20Ag alloy

Effect of Cr addition on microstructure and properties of Cu-Ni-Co-Si-Mg alloys

Synergistic Enhancement of Strength, Plasticity, and Electrical Conductivity in Cu–3Ti Alloy: Process Optimization and Mechanism Analysis

Microstructural evolution of C1720W microfilament for fuzz buttons during service

Mechanism of Cr enhancement on stress relaxation resistance in Cu–Ni–Co–Si–Mg alloys

形变热处理对Cu-Ni-Si合金组织性能的影响

微合金化元素对纯铜热稳定性和导电性的影响

热浸镀锡电子铜带材回流焊过程中镀锡层的微观结构及缺陷分析

均匀化退火对Cu-Ni-P合金组织和性能的影响

线径压缩率对微细铜线材拉拔变形的影响（英文）

Cu-4Ag合金微细丝拉拔极限预测模型

The influences of Cr and Mn on the strength, electrical conductivity, and stress relaxation properties of Cu-Ni-Si-Co-Mg alloys

Influence of different rolling passes and deformation amounts on the microstructure evolution and strengthening mechanism of Cu–Ni–Si alloy

Study of the stress relaxation resistance and microstructural evolution of a Cu–Ni–Si alloy strip

Study on the microstructure and mechanism of stress relaxation behavior of Cu–Ni–Si alloy by two-stage rolling deformation

Effects of cold deformation and aging on the phase transformation and mechanical properties of a Cu-15Ni-8Sn alloy

Effects of electrical pulse on metal deformation behaviors

Influence of Key Material Parameters and Loading Path on Fatigue Failure Behaviors of Corrugated Tubes

Mechanism of the synergistic effect of solid solution strengthening and fine grain strengthening in an as-cast Cu–9Ni–6Sn alloy induced by Mn

固溶和时效对挤压态Cu-15Ni-8Sn合金组织和性能的影响

Y对铸态Cu-15Ni-8Sn合金性能及Sn元素分布的影响

电流辅助成形中位错演化行为研究进展

Evolution of grain characteristics and dynamic recrystallization behavior of Cu–15Ni–8Sn alloy under different extrusion ratios

Nanophase transformation and strengthening - Toughening mechanism of the Cu–15Ni–8Sn alloy during aging

Effect of Low-Temperature Annealing on the Bending Properties of C19400 Copper Alloy Strips

Cu-15Ni-8Sn合金热变形行为及热加工图

不同变形量对Cu-2Ag合金组织和性能的影响

C19400铜合金带材折弯性能分析

氯离子质量浓度及电场强度对电解铜箔性能的影响

热型连铸固液界面影响效应的研究进展

退火温度对C19400合金组织性能和残余应力的影响

Effect of Stretch-Bending Straightening on the Residual Stress of C19400 Alloy Strips

Effects of a thermal-ultrasonic stress relaxation process on the residual stress, mechanical properties and microstructures of C19400 copper alloy strips

短时低温退火对Cu-2.1Fe-0.03P合金板材组织和性能的影响

基于响应曲面法的QCr0.5铜合金热挤压冲头磨损数值分析

时效时间对Cu-3.5Ag合金性能及其纳米析出相特征的影响

含Ti镍铝青铜合金的人工海水冲蚀行为

稀土元素La对Zn-Cu-Ti-Mg合金组织和性能的影响

Cu-Al2O3（0.68%）弥散强化铜合金塑性变形特性

稀土对挤压态Cu-7Ni-7Al-2Fe-2Mn合金耐蚀性能影响

Al2O3/Cu弥散强化铜合金应力松弛行为

热处理对变形Zn-Cu-Ti合金组织和性能的影响

热处理对Cu-0.23Be-0.84Co合金性能和组织的影响

自力型触指用高强高导铜合金带材的制备工艺

时效对Cu-0.33Cr-0.06Zr合金导电率与硬度的影响

TiB2含量对弥散强化TiB2/Cu复合材料抗电蚀性能的影响

Cu-0.23Be-0.84Co合金熔铸工艺及组织性能研究

Zn-0.9Cu-0.026Ti合金的组织和性能

铜/铝固-液复合研究

SPS法制备弥散强化铜基复合材料的组织和性能

直流电流对Cu-0.86Cr合金电导率及时效速率的影响

稀土气氛对内氧化法制备铜基复合材料的影响

Effect of the Thermal Expansion Characteristics of Reinforcements on the Electrical Wear Performance of Copper Matrix Composite

Cu-10Sn-4Ni-3Pb alloy prepared by crystallization under pressure: An experimental study

新型耐磨锡青铜合金包套挤压工艺及组织性能(英文)

直流电流下时效对Cu-0.86Cr合金力学性能的影响

Microstructure and properties of wear-resisting Cu-Sn-Pb-Ni alloy prepared by canning extrusion process

形变热处理对Cu-1.0Cr合金组织及性能的影响

紫铜三通管轴压胀形数值模拟及验证

LCT铜合金的研制及在压铸模压射头上的应用

会议论文

热处理对变形Zn-Cu-Ti-Mg合金组织性能的影响

热处理对Cu-0.23Be-0.84Co合金性能组织的影响