冀宏

期刊论文

1. 李彦泽，冀宏，汤荣福，孙飞，林博，代鹏云（2026）. 串联增压离心泵的高转速齿轮泵噪声特性分析. 《农业工程学报》.
2. 王虎军，郑直，冀宏（2026）. 基于GGI与网格拓扑技术的滑阀启闭流场及空化. 《机床与液压》.
3. 杜媛英，赵海荣，冀宏，王文山，郑世佳（2026）. 航空柱塞泵仿生柱塞副微观界面润滑机理研究. 《表面技术》.DOI
4. 李彦泽，冀宏，汤荣福，孙飞，林博，李明杰（2026）. 蝶形卸荷槽对齿轮泵困油压力与噪声的抑制研究. 《机床与液压》.
5. 许煜晨，冀宏，陈乾鹏，刘欢（2026）. 电驱液压旋挖机前进补偿与动作匹配控制方法研究. 《机床与液压》.
6. 范龙航，冀宏，张建军，孙飞，李彦泽（2026）. 基于粘结剂喷射增材制造的典型液压流道拓扑优化设计研究. 《液压与气动》.
7. 李明杰，冀宏，丁玲，罗畅敏，陈乾鹏，李彦泽，陈国雪（2026）. 航空燃油控制系统转换活门复位弹簧优化设计及动态特性分析. 《机床与液压》.
8. 薛静，冀宏，柴文伟，罗畅敏，陈乾鹏（2026）. 热-粒耦合作用下插装式换向阀阀芯滞卡与磨损特性研究. 《机床与液压》.
9. Fei Sun, Ruixue Jia, Pengyun Dai, Qinghua Li, Hong Ji (2026). Micro-overturning phenomenon and verification of the ring gear in high speed integrated internal gear motor-pump. Engineering Failure Analysis.DOI
10. Qinghua Li, Hong Ji, Zhi Zheng (2026). The effect of oil temperature on cavitation inception and development in V-notched hydraulic valve orifices. Physics of Fluids.DOI
11. Chen Qian-peng, Liu Min, Ji Hong, Fang Xiao, Luo Chang-Min (2026). Study on thermal-particle coupling friction and morphology characteristics of cartridge-type fixed pressure valve. Surface Topography Metrology and Properties.DOI
12. Qianpeng Chen, Ji Hong, Huan Xie, Ding Ling (2026). Hydraulic Spool Valve Contamination Susceptibility Test and Visualization Study of Clearance Particle Ingress- Aggregation Phenomenon.DOI
13. 曹建锋，王玉虎，冀宏，张建军，姚鹤，杨福年（2025）. 食品超高压处理设备恒功率变量增压系统的设计及仿真. 《机床与液压》.
14. 陈国雪，冀宏，张建军，陈吉庆，李亚萍，杜斌（2025）. 滴灌系统小流量迷宫式灌水器的水力特性及优化设计研究. 《兰州理工大学学报》.
15. 刘新强，林广，冀宏，王聪，肖尧，齐铭桦（2025）. 液压伺服滑阀小开度动态阀口冲蚀特性研究. 《机床与液压》.
16. 杨胜清，冀宏，王素燕，李茜，孙飞（2025）. 吸油全流域特性对工程机械主泵效率的影响分析. 《机床与液压》.
17. 袁林，潘鹤，何志冬，刘新强，冀宏（2025）. 航空燃油系统方孔滤网过滤机制及影响因素研究. 《液压气动与密封》.
18. 袁林，邵雪嵩，阎洛鸥，刘新强，冀宏（2025）. 航空燃油系统方孔滤网元件强度特性及其影响因素研究. 《液压气动与密封》.
19. 刘欢，冀宏，陈乾鹏，柴文伟，罗畅敏（2025）. 液压滑阀热-粒耦合摩擦力及形貌特征研究. 《机床与液压》.
20. 刘宇昊，冀宏，陈乾鹏，柴文伟，罗畅敏，潘鹤（2025）. 航空燃油控制系统滑阀内颗粒运移特性研究. 《机床与液压》.
21. 袁林，邵雪嵩，何志冬，刘新强，冀宏（2025）. 航空燃油系统旁路冲洗式方孔滤网元件自清洁机制研究. 《机床与液压》.
22. 冀宏，李磊，简洪超，赵文杰（2025）. 液压系统-主控阀动态特性的实时联合仿真方法. 《液压与气动》.
23. 高名乾，贺建强，李固，冀宏，郭敏杰（2025）. 基于耦合流动的卷扬液压回路动态特性研究. 《液压与气动》.
24. 陈吉庆，冀宏，李晨，孙飞，王素燕，汤荣福（2025）. 液压油介质下常规离心泵有效增压供液的适应性分析. 《液压与气动》.
25. Yuanying Du, Zhao Hairong, Hong Ji, Wenshan Wang, Xu Feiqin, Wang Hongbo (2025). Research on leakage characteristic of slipper pair of aviation piston pump considering viscosity temperature and pressure effect. Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology.DOI
26. Rongfu Tang, Hong Ji, Shengqing Yang, Suyan Wang (2025). Structural optimization and verification to suction runner of high-speed external gear pump. Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering.DOI
27. Sun Fei, Hong Ji, Shengqing Yang, Suyan Wang, Xinsheng Zhou, Bo Lin (2025). Numerical simulation and visualization study of cavitation characteristics in the high-speed linear-conjugate internal gear pump. Flow Measurement and Instrumentation.DOI
28. 姚璐晔，吴凌天，周静亚，吴金男，徐得磊，朱益波，冀宏（2024）. 应用型本科“生物反应工程”课程翻转课堂设计与实践. 《生物工程学报》.
29. 王一轩，冀宏，李晨，杨胜清，汤荣福，王素燕（2024）. 用于高转速液压泵吸油增压的离心泵设计与可视化研究. 《机床与液压》.
30. 贺建强，冀宏，王东升（2024）. 先导式溢流锥阀外锥形阀口结构气穴特性数值分析. 《机床与液压》.
31. 张建军，冀宏，简洪超，刘新强（2024）. 基础振动下插装式单向阀的动态响应特性研究. 《华中科技大学学报(自然科学版)》.
32. 杨胜清，冀宏，李晨，王素燕，汤荣福（2024）. 高速运行齿轮泵的吸油空化与抑制. 《液压与气动》.
33. 刘新强，王聪，冀宏，林广，齐铭桦，肖尧（2024）. 液压伺服滑阀工作边冲蚀行为及影响因素. 《液压与气动》.
34. 冀宏，何志冬，刘新强，阎洛鸥，袁林（2024）. 航空燃油系统双层方孔滤网过滤特性研究. 《液压与气动》.
35. 高文科，王状状，张曦文，王圣垚，冀宏（2024）. 基于HP滤波和Wiener过程的柱塞泵剩余使用寿命预测. 《航空动力学报》.
36. Pengyun Dai, Hong Ji, Qianpeng Chen, Zhaoqiang Wang, Jinbo Wang (2024). Investigation of the Dynamic Characteristics of the Buffer Relief Valve of a Swing Motor Under Start–Stop Impact. Processes.DOI
37. Xinqiang Liu, Minghua Qi, Hong Ji, Fei Liu, Guang Lin, Yao Xiao (2024). Orifice erosion effect and variable gain control method for hydraulic servo spool valve. Flow Measurement and Instrumentation.DOI
38. Qianpeng Chen, Min Liu, Hong Ji, Wenwei Chai, Changmin Luo (2024). Characterization of Hydraulic Spool Clamping Triggered by Solid Particles Based on Mechanical Model and Experiment Research. Applied Sciences.DOI
39. Jianjun Zhang, Hong Ji, Wenjie Zhao, Qianpeng Chen, Xinqiang Liu (2024). Numerical Investigation of Micrometer-Sensitive Particle Intrusion in Hydraulic Valve Clearances and Its Impact on Valve Performance. Processes.DOI
40. 徐璐，卢明晓，顾志良，郁建锋，冀宏（2023）. “虚拟仿真”实验在《DNA重组与分子克隆实训》的教学应用. 《工业微生物》.
41. 孙飞，冀宏，李晨，彭彦博（2023）. 子母叶片泵全流场的高精度建模方法及验证. 《华中科技大学学报(自然科学版)》.
42. 刘新强，刘飞，冀宏，王聪，林广（2023）. 液压伺服滑阀阀口小开度冲蚀特性. 《液压与气动》.
43. 冀宏，邢晖晖，孙飞，彭彦博，李晨（2023）. 基于流固耦合传热分析的液压电机泵温度场特征. 《液压与气动》.
44. 刘乐璠，郑直，闵为，冀宏（2023）. 基于动态重叠网格的阀芯振荡空化的研究. 《液压与气动》.
45. Chen Qianpeng, Hong Ji, Sun Fei, Zhao Hongke (2023). Study on energy loss, temperature distribution and clamping mechanism of K, U, and V-groove spools based on thermocouple measurement and thermo-fluid–solid coupling simulation. Journal of the Brazilian Society of Mechanical Sciences and Engineering.DOI
46. Bo Han, Zhaoqiang Wang, Hong Ji, Lingtao Sun, Yangjun Lu (2023). Analysis of Friction Characteristics of Valve Plate Pair in an Axial Piston Pump Considering Cylinder Block Dynamics. Journal of Tribology.DOI
47. Nana Li, Hong Ji, Liejiang Wei, Wanyu Dong, Zhan Nan Peng, Xinqiang Liu (2023). Generation mechanism of high-frequency oscillation in proportional valve with a high-speed on/off valves bridge as the pilot stage. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
48. Bo Han, Wang Zhaoqiang, Hong Ji, Lingtao Sun, LU Yang-jun (2023). Analysis of Friction Characteristics of Port Plate Pair in an Axial Piston Pump Under Instantaneous Working Conditions. International Conference on Fluid Power and Mechatronics.DOI
49. Jian-Jun Zhang, Hong Ji, Jiqing Chen, Yin-Shui Liu, Jianfeng Cao (2023). Study on Dynamic Characteristics of An Ultra-High Pressure Disc Spring Loaded Relief Valve. International Conference on Fluid Power and Mechatronics.DOI
50. Binquan Zhu, Zhi Jian Zheng, Min Wei, Hong Ji (2023). Study on Valve Core Oscillation Induced Cavitation Based on Immersion Boundary and Adaptive Mesh Refinement. International Conference on Fluid Power and Mechatronics.DOI
51. Xinqiang Liu, Cong Wang, Hong Ji, Liang Hu, Guang Lin, Nana Li (2023). Visualization and influence factors of erosion at the working edge of a hydraulic servo spool valve. International Conference on Fluid Power and Mechatronics.DOI
52. Xinqiang Liu, Hong Ji, Fei Liu, Guang Lin, Cong Wang, Nana Li (2023). Erosion microscopic morphology and formation mechanism of hydraulic servo spool valve. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
53. Yuhan Ma, Hong Ji, Shixuan Su, Jianjun Zhang, Xinqiang Liu (2023). Dynamic Characteristics of Cartridge Solenoid Switch Valve Under Foundation Vibration. International Conference on Fluid Power and Mechatronics.DOI
54. Sun Fei, Hong Ji, Yanbo Peng, Xinsheng Zhou, Luoou Yan (2023). Temperature Distribution Characteristics of Non-oil-immersed Air Gap Type Hydraulic Electric Motor Pump at Wide Speed. International Conference on Fluid Power and Mechatronics.DOI
55. Sun Fei, Hong Ji, Shengqing Yang, Changlian Li (2023). Numerical Investigation on Pairing Solutions of Non-Positive Displacement Pumps and Internal Gear Pump for High-Speed Design. Fluids.DOI
56. 赵晶，冀宏，刘银水，张建军（2022）. 热-压形变对超高压水压泵柱塞副间隙泄漏的影响. 《兰州理工大学学报》.
57. 陈乐，高文科，冀宏，张磊（2022）. 基于HP滤波与ARIMA-GARCH模型的柱塞泵泄漏量预测. 《农业工程学报》.
58. 姚璐晔，吴凌天，周静亚，冀宏（2022）. “工业微生物育种”项目化教学实施建设探索. 《教育教学论坛》.
59. 冀宏，赵宏科，刘耀卓，刘银水（2022）. 阀配流水压柱塞泵的回冲射流及其容积损失. 《液压与气动》.
60. 李娜娜，冀宏，魏列江，刘新强，刘亚斌（2022）. 影响高速开关阀响应特性的主要设计参数分析. 《液压与气动》.
61. Min Wei, Cheng Li, Hongyu Wang, Zhi Jian Zheng, Jianfeng Zhao, Hong Ji (2022). Discharge coefficient of pilot poppet valve at low Reynolds number. Flow Measurement and Instrumentation.DOI
62. Jie Dong, Yipan Deng, Wenbin Cao, Zhongkai Wang, Wensheng Ma, Defa Wu, Hong Ji, Yinshui Liu (2022). Wear failure analysis of suction valve for high pressure and large flow water hydraulic plunger pump. Engineering Failure Analysis.DOI
63. Sun Fei, Hong Ji, Chen Qianpeng, Shengqing Yang (2022). Gaseous cavitation characteristics of high-speed hydraulic electric motor-pump based on centrifugal pressurization: A numerical study. Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering.DOI
64. Sun Fei, Hong Ji, Peng Yanbo, Li Chen (2022). Numerical simulation and prototype experiment of integrated electrohydraulic pump. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
65. 顾志良，徐璐，郁建锋，孙海燕，冀宏（2021）. 工程教育认证背景下的课程思政教育的探索实践——以“分子生物学与基因工程”为例. 《教育教学论坛》.
66. 陈乾鹏，冀宏，赵晶，闵为，郑直（2021）. 内嵌微小热电偶的液压阀口温度分布实验及数值分析. 《华南理工大学学报(自然科学版)》.
67. 朱益波，吴凌天，吴金男，冀宏（2021）. 应用型本科高校围绕解决生物工程专业复杂工程问题能力培养的课程体系思考与构建. 《生物工程学报》.DOI
68. 张建军，马岷成，赵基宏，冀宏，魏列江（2021）. 一种超高层建筑施工整体顶升平台的液压系统设计. 《机床与液压》.
69. 陈旭峰，高文科，冀宏（2021）. 考虑位姿及锥度影响的柱塞副泄漏流量分析. 《机床与液压》.
70. Qianpeng Chen, Hong Ji, Huihui Xing, Hongke Zhao (2021). Experimental study on thermal deformation and clamping force characteristics of hydraulic spool valve. Engineering Failure Analysis.DOI
71. Jie Dong, Yinshui Liu, Hong Ji, Liejiang Wei, Defa Wu (2021). Simulation of Unsteady Flow Characteristics of the Reciprocating Pump Check Valve for High Pressure and High Flow Water Medium. Journal of Fluids Engineering.DOI
72. Xinqiang Liu, Hong Ji, Fei Liu, Nana Li, Jianjun Zhang, Wen Ren (2021). Particle motion and erosion morphology of the spool orifice in an electro-hydraulic servo valve under a small opening. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
73. Yujie Bai, Hong Ji, Yaozhuo Liu, Lei Li, Shengqing Yang (2021). Analysis of Bubble Flow Mechanism and Characteristics in Gas–Liquid Cyclone Separator. Processes.DOI
74. 刘新强，冀宏，孙飞，李娜娜，张建军（2020）. 固体颗粒物致液压阻尼孔阻塞的形成机理. 《兰州理工大学学报》.
75. Qianpeng Chen, Hong Ji, Hongke Zhao, Jing Zhao (2020). Optimization Algorithm and Joint Simulation to Micro Thermal Deformation Using Temperature Measurement in the Orifice of Hydraulic Valve. Processes.DOI
76. Min Wei, Hongyu Wang, Zhi Jian Zheng, Dong Wang, Hong Ji, Yubo Wang (2020). Visual experimental investigation on the stability of pressure regulating poppet valve. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
77. Yinshui Liu, Jiangkun Zou, Yipan Deng, Hong Ji (2020). Research on the seawater-lubricated sliding bearing of a novel buoyancy-regulating seawater pump considering the working depth. Australian Journal of Mechanical Engineering.DOI
78. 冀宏，张建，蔡铮，蒋俊，陈乾鹏（2019）. 装载机定变量式工作液压系统动态特性与能耗分析. 《兰州理工大学学报》.
79. 刘新强，冀宏，武俊合，崔腾霞，杨旭博，袁王博（2019）. 液压锥阀阀口冲蚀磨损数值预测与对策. 《兰州理工大学学报》.
80. 冀宏，陈乾鹏，张建，崔腾霞，蒋俊，蔡铮（2019）. 开中位多路阀稳态液动力的控制方法. 《兰州理工大学学报》.
81. Shuai Fan, Rui Li Xu, Hong Ji, Shengqing Yang, Qingyun Yuan (2019). Experimental Investigation on Contaminated Friction of Hydraulic Spool Valve. Applied Sciences.DOI
82. Xinqiang Liu, Hong Ji, Min Wei, Zhi Zheng, Wang Jinlin (2019). Erosion behavior and influence of solid particles in hydraulic spool valve without notches. Engineering Failure Analysis.DOI
83. Yinshui Liu, Jie Dong, Shan Wu, Defa Wu, Yipan Deng, Hong Ji (2019). Theoretical research on the dynamic characteristics of electrohydraulic servo valve (EHSV) in deep sea environment. Ocean Engineering.DOI
84. Zhaoqiang Wang, Yanfei Xu, Shan Shan Hu, Hong Ji, Jian Jun Yang (2019). Research on lubrication mechanism with fluid–solid coupling of port plate pair in swash plate axial piston pump. Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology.DOI
85. Zhaoqiang Wang, Jun Cheng, Hong Ji, Shan Shan Hu, Hao Chen (2019). Temperature characteristics analysis of axial piston pump port plate pair. Industrial Lubrication and Tribology.DOI
86. Haili Yuan, Hong Ji, Jianjun Zhang, Xinqiang Liu, Qianpeng Chen, Zhi Jian Zheng, Guoyi Peng (2019). Visualization Experiment of Single Particle Motion in Model of Spool Valve Clearance.DOI
87. Ran Li, Wei Wenshu, Hao Liu, Zhu Yi, Hong Ji, Jian Ye, Wei Wang, Chengjin Tian, He Zhenggang, Bo Liu, Wang Dalong, Mengyu Wu, Zhang Jiankai, Na Gao (2019). Simulation Study on Liquid-end of High-pressure and Large-flow-rate Reciprocating Pump.DOI
88. 冀宏，张硕文，刘新强，陈晓明，朱奕（2018）. 固体颗粒对射流偏转板伺服阀前置级冲蚀磨损的影响. 《兰州理工大学学报》.
89. 冀宏，陈晓明，黄路路，杨旭博（2018）. 气隙非浸油电机泵内稳态温度场数值计算与分析. 《兰州理工大学学报》.
90. 冀宏，张硕文，刘新强，李瑞锋，李琼（2018）. 射流偏转板劈尖形变对其零位特性的影响. 《兰州理工大学学报》.
91. 闵为，王东，郑直，欧培伟，冀宏（2018）. 低压下锥阀振荡空化的可视化试验研究. 《机械工程学报》.
92. Zhen-yi Yang, Hong Ji, Yan-geng Li (2018). Analysis on the Main Design Parameters Influencing the Impact Efficiency of Dual-Chamber-Controlled Hydraulic Drifter. International Journal of Precision Engineering and Manufacturing.DOI
93. Zhaoqiang Wang, Zhaoqiang Wang, Shan Shan Hu, Hong Ji, Zhen Wang, Zhen Wang, Wei Liang (2018). Study on the characteristics of oil film load capacity for axial piston pump. Australian Journal of Mechanical Engineering.DOI
94. Zhaoqiang Wang, Zhaoqiang Wang, Shan Shan Hu, Hong Ji, Zhen Wang, Zhen Wang, Xintian Liu (2018). Analysis of lubricating characteristics of valve plate pair of a piston pump. Tribology International.DOI
95. Qianpeng Chen, Hong Ji, Zhu Yi, Yang Xubo (2018). Proposal for Optimization of Spool Valve Flow Force Based on the MATLAB-AMESim-FLUENT Joint Simulation Method. IEEE Access.DOI
96. Zhen-yi Yang, Hong Ji, Yangeng Li (2018). Existence scope of only primary vibration within one impact period of a hydraulic drifter piston via point transformation. Journal of Advanced Mechanical Design Systems and Manufacturing.DOI
97. 王建森，王鹏飞，冀宏，刘耀林，万喆（2017）. 空化流动下液压锥阀所受推力的数值计算. 《兰州理工大学学报》.
98. 冀宏，崔腾霞，陈晓明，闵为，郑直，刘新强（2017）. 滑阀间隙中方形微米颗粒的旋转现象. 《兰州理工大学学报》.
99. Lulu Huang, Hong Ji, Zhu Yi (2017). Analysis of effective working characteristic of the proportional solenoid. International Conference on Green Energy and Applications (ICGEA).DOI
100. 冀宏，武哲，郑直，张峰（2016）. 基于DPM的旋芯喷嘴的雾化特性. 《兰州理工大学学报》.
101. 冀宏，郭海堂，魏列江（2016）. 工作参数对变量柱塞泵流量脉动的影响. 《兰州理工大学学报》.
102. 冀宏，梁永军，柳宁，姚璐晔，王慧，宋驰（2016）. 杏鲍菇液体菌种质量评价及标准研究初探. 《北方园艺》.
103. 冀宏，孙东宁，王金林，张继铭（2015）. 液压油箱内气泡流动观测及气泡分离方法. 《兰州理工大学学报》.
104. 徐兵，姚璐晔，朱婧，冀宏（2015）. 白灵菇品种选育研究. 《北方园艺》.
105. Wang Jinlin, Hong Ji, Wei Ren, Jiming Zhang (2015). Rotational speed characteristic of rotor immersed in oil within an electric motor-pump. International Conference on Fluid Power and Mechatronics.DOI
106. 冀宏，张继铭，王金林，王文璐，孙东宁（2014）. 变转速液压电机泵中孔板离心泵的增压作用. 《兰州理工大学学报》.
107. Hong Ji, Wenlu Wang, Jinlin Wang, Jiming Zhang (2014). Performance test and analysis of the prototype of the electric motor-pump. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
108. Min Wei, Hong Ji, Linfeng Yang (2014). Axial vibration in a poppet valve based on fluid–structure interaction. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
109. Zhaoqiang Wang, Linyi Gu, Hong Ji, Jiawang Chen, Lin Li (2014). Flow field simulation and establishment for mathematical models of flow area of spool valve with sloping U-shape notch machined by different methods. Journal of Central South University.DOI
110. Hong Ji (2014). Charging Effect of Port-plate Centrifugal Pump in Electric Motor-pump. Journal of Mechanical Engineering.DOI
111. 冀宏，刘新强，郑直，王金林（2013）. 固体颗粒物诱发溢流阀调压失效的作用机制. 《兰州理工大学学报》.
112. 冀宏，王洋（2013）. 轴向柱塞泵工作腔吸油气穴数值解析. 《兰州理工大学学报》.
113. 冀宏，武俊合，王金林，孙天健（2013）. 液压电机叶片泵的振动模态分析. 《兰州理工大学学报》.
114. 范严伟，赵文举，冀宏（2012）. 膜孔灌溉单孔入渗Kostiakov模型建立与验证. 《兰州理工大学学报》.
115. 范严伟，赵文举，冀宏（2012）. 垂直一维入渗土壤水分分布与入渗特性数值模拟. 《兰州理工大学学报》.
116. 冀宏，曹永，王建森，王峥嵘（2011）. 非全周开口滑阀的节流温升与形变. 《兰州理工大学学报》.
117. 范严伟，赵文举，冀宏（2011）. 膜孔灌自由入渗土壤水分运动数值模拟. 《兰州理工大学学报》.
118. Qi Qi, Hong Ji (2011). Simulation and Analysis of Special Motor of the Hydraulic Motor-Vane Pump Based on Ansoft. Applied Mechanics and Materials.DOI
119. Shaonian Li, Wei Liejiang, Wang Zheng-rong, Hong Ji (2011). Effects of shape of vane on force of vane in high pressure vane pump.DOI
120. Hong Ji, Cao Yong, Wang Zheng-rong, Yang Wang (2011). Numerical analysis of temperature rise by throttling and deformation in spool valve.DOI
121. Zhengrong Wang, Hong Ji, Rennian Li, Shaonian Li, NA Cheng-lie (2011). Influence of silencing grooves configuration on performance in high-pressure vane pump.DOI
122. Jiansen Wang, Hong Ji, Fengyu Yang, Liejiang Wei (2011). Simulation and experiment investigation on hydraulic piloted control circuit.DOI
123. Shao Nian Li, Lie Wei, Zheng Rong Wang, Hong Ji (2011). Effect of the Content of Air Bubble in Oil on Forces of Vane in High Pressure Vane Pump. Applied Mechanics and Materials.DOI
124. Shao Nian Li, Li Jiang Wei, Hong Ji, Zheng Rong Wang (2011). Effect of the Content of Air Bubble in Oil on Pressure of Oil in Working Cavity of High Pressure Vane Pump. Advanced materials research.DOI
125. 王峥嵘，冀宏，胡启辉，王建森（2010）. 液压电机叶片泵样机的噪声测量及分析. 《中国机械工程学会流体传动与控制分会第六届全国流体传动与控制学术会议论文集》.
126. 冀宏，李志峰，王峥嵘，王建森，兰博杰（2010）. 液压电机叶片泵样机的性能试验. 《农业机械学报》.
127. 张建卫，冀宏，王多成，张玲珑（2010）. 电液伺服大型多功能压剪试验机的研制. 《中国机械工程学会流体传动与控制分会第六届全国流体传动与控制学术会议》.
128. 冀宏，张玲珑，杨建新，梁宏喜（2010）. 油压驱动海水往复泵的流量脉动及其控制. 《中国机械工程学会流体传动与控制分会第六届全国流体传动与控制学术会议》.
129. 周云，朱婧，郑雪平，吴金男，姚璐晔，冀宏（2010）. 杏鲍菇工厂化栽培品种杂交育种研究. 《北方园艺》.
130. 冀宏，李亚，张继环，王建森，丁大力（2010）. 液压阀口气穴流动的平面观测方法. 《兰州理工大学学报》.
131. 冀宏，张继环，王东升，张玮，刘小平（2010）. 滑阀矩形节流槽阀口的流量系数. 《兰州理工大学学报》.
132. 冀宏，陈文杰，马允莉，韩韬，霍红（2009）. 野生桦褐孔菌菌株JS-1驯化栽培研究. 《北方园艺》.
133. 冀宏，谭正生，张玮，丁大力（2009）. 流量放大阀主阀心复位运动的数值解析. 《兰州理工大学学报》.
134. 冀宏，孙磊，王峥嵘，许丹丹，李志峰（2009）. 液压电机泵中浸油电机的负载效应. 《兰州理工大学学报》.
135. 冀宏，王东升，丁大力，谭正生，刘小平（2008）. 非全周开口滑阀阀口面积的计算方法. 《兰州理工大学学报》.
136. 王峥嵘，冀宏，李少年，那成烈（2008）. 工况变化对车辆用转向叶片泵配流冲击的影响. 《兰州理工大学学报》.
137. 张静，齐学义，冀宏，侯祎华（2008）. 双流道污水泵叶轮流道中线特性研究. 《流体机械》.
138. Jun Tao Zou, Xin Hua Fu, X W Du, X D Ruan, Hong Ji, Shohei Ryu, Masami Ochiai (2008). Cavitation in a non-circular opening spool valve with U-grooves. Proceedings of the Institution of Mechanical Engineers Part A Journal of Power and Energy.DOI
139. 冀宏，秦艳梅，陈文杰（2007）. 食用菌栽培病虫害清洁防治技术. 《北方园艺》.
140. Xin Hua Fu, Xuewen Du, Jun Tao Zou, Hong Ji, Shohei Ryu, Masami Ochiai (2007). Characteristics of Flow Through Throttling Valve Undergoing a Steep Pressure Gradient. International Journal of Fluid Power.DOI
141. 冀宏，王峥嵘，李少年，张玮（2006）. 油液弹性模量对高压叶片泵性能的影响. 《兰州理工大学学报》.
142. 傅新，冀宏，杨华勇（2005）. 液压元件典型激振流场控制理论与方法的研究. 《机械工程学报》.
143. Xin Hua Fu, Hong Ji, Shohei Ryu (2005). INVESTIGATION INTO PRESSURE DISTRIBUTION OF SPOOL VALUE WITH NOTCHES. Proceedings of the JFPS International Symposium on Fluid Power.DOI
144. 冀宏，傅新，杨华勇，王亮（2004）. 限速切断阀的限定流量特性研究. 《农业机械学报》.
145. 韩德源，陈玉兰，邢薇，于海燕，冀宏（1997）. 智能式管接头自动上装机械手. 《机械工程师》.