百晓学者学者目录

杨德庆

上海交通大学船舶海洋与建筑工程学院

个人简介

杨德庆,上海交通大学船舶海洋与建筑工程学院教授、博士生导师,研究方向为船舶工业、力学、工业通用技术及设备。主要开展船舶与海洋工程结构动力学、振动噪声控制、超材料减振降噪、结构拓扑优化、液舱晃荡与波浪载荷分析等研究,主持国家自然科学基金项目3项、“863”计划项目多项。

精选作品

期刊论文

  1. 夏侯命胜,迟健,吴晋嘉,李成君,杨德庆(2026). 新一代T型艏风电安装船的砰击载荷数值模拟及特性分析. 《船舶》.
  2. 田丛赫,石原赫,杨德庆(2026). 核爆与水下爆炸作用下舰船门体组件安全性数值评估. 《船海工程》.
  3. 龚骁坤,李清,杨德庆,王迎光(2026). 力学可重构负刚度超结构的可调控水下声隐身性能. 《水下无人系统学报》.
  4. Mingsheng Xiahou, Haibin Zhang, Yanwu Tao, Chengjun Li, Deqing Yang (2026). Hydrodynamic performance of a wide–flat ship fitted with dual U-tube anti-rolling tanks in beam seas. Ocean Engineering.DOI
  5. 王蕊果,杨德庆(2025). 船舶管线超材料低频宽带减振支架设计. 《中国造船》.
  6. 姜鼎一,李清,杨德庆,陈灏,刘西安(2025). 局域共振星形弹性波超材料设计与振动抑制性能研究. 《振动与冲击》.
  7. 王蕊果,杨德庆,刘西安(2025). 高、低温环境下船舶管线金属超结构减振支架设计. 《振动与冲击》.
  8. 左营营,杨德庆,肖健(2025). 邮轮舱室瞬态噪声的时域与频域数值计算方法. 《中国舰船研究》.
  9. 王博涵,杨德庆(2025). 弹性体反共振俘能器设计方法与减振机理研究. 《中国舰船研究》.
  10. Liming Zhang, Deqing Yang, Qing Li, Jianghai Qiu (2025). Tailor metamaterial bandgaps with bending, folding and twisting for the non-vibration ship pump base. Journal of Ocean Engineering and Science.DOI
  11. Yaoze Zhuang, Deqing Yang, Qing Li, Xiaoming Geng (2025). Modified vibro-acoustic spectrum characteristics for underwater cylindrical shells with mechanical metastructures. International Journal of Solids and Structures.DOI
  12. Mingsheng Xiahou, Yanwu Tao, Hengxu Liu, Jian Chi, Deqing Yang (2025). Investigation on Hydrodynamic Performance of Closed and Semi-Closed Rigid Cylindrical Aquaculture Platforms. Journal of Marine Science and Engineering.DOI
  13. Mingsheng Xiahou, Zhiyuan Wei, Yilin Wang, Deqing Yang, Jian Chi, Shuxiang Liu (2025). Integrated Assessment Methodology for Jack-Up Stability: Centrifuge Test of Entire Four-Legged Model for WTIVs. Applied Sciences.DOI
  14. Y L Zuo, Deqing Yang, Jian Xiao (2025). Time-domain virtual tapping machine method for numerical evaluation of transient acoustic performance in cruise cabins. Journal of low frequency noise, vibration and active control.DOI
  15. Mingsheng Xiahou, Wei Lu, Jian Chi, Xue Min Tian, Baokun Gao, Deqing Yang (2025). Key technologies for general design of multipurpose liftboat with large operational air gap.DOI
  16. 赵丽刚,盛瑞琨,胡建辉,杨德庆(2024). 基于固-气-液耦合的气垫船水下辐射噪声数值分析. 《船舶力学》.
  17. Yaoze Zhuang, Qing Li, Deqing Yang, Xiaoming Geng (2024). Vibration suppression of power cabin for underwater vehicle based on mechanical metamaterial flanges. Ocean Engineering.DOI
  18. Yingying Zuo, Deqing Yang, Yaoze Zhuang (2024). Broadband transient vibro-acoustic prediction and control for the underwater vehicle power cabin with metamaterial components. Ocean Engineering.DOI
  19. Yuanhe Shi, Deqing Yang, Qing Li, J. Qin (2024). Cabin noise analysis of polar transport vessels under ship‒ice‒water‒air coupling continuous icebreaking based on the S-ALE algorithm. Marine Structures.DOI
  20. Yuanhe Shi, Deqing Yang, Qing Li (2024). Underwater radiated noise numerical analysis of polar transport vessels under ship-ice-water-air coupling continuous icebreaking based on the S-ALE algorithm. Ocean Engineering.DOI
  21. Qing Li, Deqing Yang (2024). A lightweight AuxHex zero Poisson's ratio pressure-resistant sandwich cylindrical shell and its load-bearing and sound insulation behaviors: Design, simulation and experiment. Ocean Engineering.DOI
  22. Liming Zhang, Deqing Yang, Qing Li, Jianghai Qiu (2024). Accessing quasi-static impact process by 3D-NPR corrugated metamaterials. International Journal of Mechanical Sciences.DOI
  23. Zhi-Min Li, Tao Liu, Deqing Yang, P. Qiao (2024). Postbuckling behaviour of anisotropic shear deformable laminated cylindrical shells with general imperfection distribution subjected to torsion. Thin-walled structures.DOI
  24. Zhi-Min Li, Tao Liu, Deqing Yang, P. Qiao (2024). A new set of explicit solutions for postbuckling behaviour of anisotropic shear deformable laminated cylindrical shells with general imperfection distribution and thermal loading. Ocean Engineering.DOI
  25. Mingsheng Xiahou, Deqing Yang, Weixia Kang, Jian Chi, Weijie Cheng (2024). Method for the Operational Weather Window Assessment of Self-Elevating Wind Turbine Installation Vessels.DOI
  26. Mingsheng Xiahou, Deqing Yang, Hengxu Liu, Yuanhe Shi (2024). Investigation on Calm Water Resistance of Wind Turbine Installation Vessels with a Type of T-BOW. Journal of Marine Science and Engineering.DOI
  27. Jianwei Zhang, Anqi Wang, Peng Chen, Jian Liu, Deqing Yang (2024). Numerical Study on the Anti-Sloshing Effect of Horizontal Baffles in a Cargo Hold Loaded with Liquefied Cargo. Journal of Marine Science and Engineering.DOI
  28. 马天帅,陈涛,杨德庆,邱伟强,高处(2023). 基于动力学优化的大跨度板架区域支柱拓扑布局研究. 《船舶》.
  29. 杨德庆(2023). 船舶与海洋工程结构动力学. 《上海交通大学出版社》.
  30. 张帆,燕家乐,杨德庆,夏军芳(2023). 邮轮轻质防火围壁的形貌与螺栓布局协同优化设计方法. 《船舶力学》.
  31. 李威,杨德庆,刘西安,刘见华,马网扣(2023). 船舶水下辐射噪声抑制的声振相关性方法. 《振动与冲击》.
  32. 毛翔,杨德庆,李清(2023). 带隙特性计算的等效梁元法与等效平面应变法. 《振动与冲击》.
  33. 张栗铭,杨德庆(2023). 力学与声学超材料在船舶工程中的应用研究综述. 《中国舰船研究》.
  34. 盛瑞琨,胡建辉,杨德庆(2023). 气垫船在内压作用下的水下辐射声功率分析. 《中国舰船研究》.
  35. Yuanhe Shi, Deqing Yang, Wen‐Wei Wu (2023). Numerical analysis method of ship-ice collision-induced vibration of the polar transport vessel based on the full coupling of ship-ice-water-air. Journal of Ocean Engineering and Science.DOI
  36. Qing Li, Zeping Wang, Xiang Mao, Deqing Yang (2023). Underwater cylindrical sandwich meta-structures composed of graded semi re-entrant zero Poisson's ratio metamaterials with pre-strained wave propagation properties. Journal of Ocean Engineering and Science.DOI
  37. Lu-Yun Chen, Yingying Zuo, Deqing Yang (2023). Human-induced noise study for cruise cabin: Numerical analysis and experimental validation. Ocean Engineering.DOI
  38. Jianwei Zhang, Shiji Yin, Weiwen Qian, Deqing Yang (2023). An experimental study on the moisture migration characteristics of liquefiable iron ore. Journal of Ocean Engineering and Science.DOI
  39. 易跃峰,杨德庆,刘西安,陈林(2022). 船舶振动声学优化设计中设备运动激励的等效反演力方法. 《计算力学学报》.
  40. Qing Li, Deqing Yang, Chenhui Ren, Xiang Mao (2022). A systematic group of multidirectional buckling-based negative stiffness metamaterials. International Journal of Mechanical Sciences.DOI
  41. J. Underwood, E. Alley, Jerolim Andrić, D. Boote, Zhen Gao, Ad Van Hoeve, J. Jelovica, Y. Kawamura, Yooil Kim, Jian-Hu Liu, Š. Malenica, H. Remes, A. Samanta, Krzysztof Wołoszyk, Deqing Yang (2022). Committee II.1: Quasi-Static Response. Day 1 Sun, September 11, 2022.DOI
  42. Qing Li, Deqing Yang, Xiang Mao (2022). Pressure-resistant cylindrical shell structures comprising graded hybrid zero Poisson's ratio metamaterials with designated band gap characteristics. Marine Structures.DOI
  43. Xi'an Liu, Deqing Yang, Qing Li, Jian-Hui Liu (2022). Energy-averaged method for ship mechanical noise prediction under kinematic excitation in the full frequency domain. Ocean Engineering.DOI
  44. Fan Zhang, Deqing Yang, Weiqiang Qiu (2022). Lightweight design and experimental investigation of codirectional corrugated steel fire bulkheads on a cruise ship. Ocean Engineering.DOI
  45. Xi'an Liu, Deqing Yang, Qing Li, Jianhua Liu (2022). Fast average prediction method based on the upper -lower limit theory for ship’s mechanical noise. Applied Acoustics.DOI
  46. Fan Zhang, Deqing Yang, Weiqiang Qiu (2022). Design and experimental study of lightweight fireproof bidirectional bead bulkheads in a cruise ship. Marine Structures.DOI
  47. Xian Liu, Deqing Yang, Qing Li (2022). The load criteria for ship mechanical noise prediction in low frequencies and experimental validation. Journal of Ocean Engineering and Science.DOI
  48. 张帆,杨德庆,邱伟强(2021). 基于形貌优化技术的邮轮轻型防火围壁设计. 《上海交通大学学报》.
  49. 高处,唐军,杨德庆,杨梦婕,李方杰(2021). 物探调查船舱室噪声预报及控制方案研究. 《舰船科学技术》.
  50. 杨德庆,刘西安,李清(2021). 船舶机械噪声计算的标准方法探讨. 《第十八届船舶水下噪声学术讨论会》.DOI
  51. 赵业楠,杨德庆,王博涵(2020). 声学黑洞俘能器在气垫船舱室噪声控制中的应用研究. 《中国造船》.
  52. 刘西安,杨德庆,李清(2020). 船舶基座阻抗计算的梯度网格模型方法. 《中国造船》.
  53. 任晨辉,杨德庆(2020). 二维负刚度负泊松比超材料及其力学性能. 《哈尔滨工程大学学报》.
  54. 夏侯命胜,程维杰,迟少艳,杨德庆(2020). 自升式平台板壳式桩腿设计. 《船舶工程》.DOI
  55. 杨德庆,钟山(2020). 零泊松比超材料设计的多评价点功能基元拓扑优化方法. 《复合材料学报》.
  56. 杨德庆,杨康,王博涵(2020). 刚度-质量-阻尼综合优化的船舶减振统一阻抗模型法. 《振动工程学报》.DOI
  57. 卢金金,王迎光,杨德庆(2020). 非线性混合海况下近海风机塔筒底部载荷的动力响应. 《舰船科学技术》.
  58. 佘小林,杨德庆(2020). 船舶舵机基座轻量化设计. 《中国舰船研究》.DOI
  59. Jian-Hui Hu, Yipo Li, Wu-Jun Chen, Deqing Yang (2020). A combined loading-creep model of ETFE foils for flat-patterning structures.DOI
  60. Jian-Hui Hu, Wu-Jun Chen, Y. Qu, Deqing Yang (2020). Safety and serviceability of membrane buildings: A critical review on architectural, material and structural performance.DOI
  61. Jian-Hui Hu, Wu-Jun Chen, Si-Jie Ren, Sihao Zhang, Y. Qu, Yue-Hong Yin, Deqing Yang (2020). Building performance monitoring and analysis of a large-span aerogel-membrane airport terminal.DOI
  62. Jian-Hui Hu, Wu-Jun Chen, Yipo Li, Y. Qu, Bing Zhao, Deqing Yang (2020). Temperature-stress-time methodology for flat-patterning ETFE cushions in use for large-span building structures.DOI
  63. Chenhui Ren, Qing Li, Deqing Yang (2020). Quasi-static and sound insulation performance of a multifunctional cylindrical cellular shell with bidirectional negative-stiffness metamaterial cores. International Journal of Mechanical Sciences.DOI
  64. Deqing Yang (2020). Ship Vibration and Noise Reduction with Metamaterial Structures. Lecture notes in civil engineering.DOI
  65. F Luo, Deqing Yang, S L Zhang (2020). Residual Anti-Explosion Performance of The Corrugated Blast Wall For Offshore Platforms after Explosion. IOP Conference Series Earth and Environmental Science.DOI
  66. Fang Luo, Shilian Zhang, Deqing Yang (2020). Anti-Explosion Performance of Composite Blast Wall with an Auxetic Re-Entrant Honeycomb Core for Offshore Platforms. Journal of Marine Science and Engineering.DOI
  67. 任晨辉,杨德庆(2019). 余弦形预制双曲梁非线性隔振器的隔振性能. 《上海交通大学学报》.DOI
  68. 夏侯命胜,李清,杨德庆(2019). 机械和螺旋桨振动噪声作用下的物探船水下辐射噪声数值预报. 《船舶工程》.DOI
  69. 夏侯命胜,李志雨,王东,杨德庆(2019). 物探船关键技术及发展趋势. 《船舶工程》.
  70. 李清,于汉,杨德庆(2019). 多类振动噪声源下舰船水下噪声的耦合声场计算方法. 《上海交通大学学报》.DOI
  71. 陈涛,杨德庆,邱伟强(2019). 邮船大跨距板架参数化建模和动力学分析程序开发. 《计算机辅助工程》.DOI
  72. 杨德庆,秦浩星(2019). 基于功能基元拓扑优化法的任意正泊松比超材料结构设计. 《上海交通大学学报》.DOI
  73. 李清,杨德庆,于汉(2019). 考虑自由液面波形的舰船水下辐射噪声计算方法. 《船舶力学》.
  74. 夏利福,杨德庆(2019). 含负泊松比超材料构件的潜艇振动与声辐射性能分析. 《振动工程学报》.DOI
  75. 王博涵,杨德庆,夏利福(2019). 内嵌声学黑洞薄板振动特性数值模拟方法研究. 《中国舰船研究》.
  76. 秦浩星,杨德庆(2019). 声子晶体负泊松比蜂窝基座的减振机理研究. 《振动工程学报》.
  77. 杨德庆,吴秉鸿,张相闻(2019). 星型负泊松比超材料防护结构抗爆抗冲击性能研究. 《爆炸与冲击》.
  78. Haoxing Qin, Deqing Yang (2019). Vibration reduction design method of metamaterials with negative Poisson’s ratio. Journal of Materials Science.DOI
  79. Chenhui Ren, Deqing Yang, Qing Li (2019). Impact resistance performance and optimal design of a sandwich beam with a negative stiffness core. Journal of Mechanical Science and Technology.DOI
  80. Qing Li, Deqing Yang (2019). Vibration and Sound Transmission Performance of Sandwich Panels with Uniform and Gradient Auxetic Double Arrowhead Honeycomb Cores. Shock and Vibration.DOI
  81. 吴秉鸿,张相闻,杨德庆(2018). 负泊松比超材料隔振基座的实船应用分析. 《船舶工程》.
  82. 杨德庆,夏利福(2018). 负泊松比超材料浮筏设计与减振机理研究. 《中国造船》.
  83. 吴秉鸿,张相闻,杨德庆(2018). 星型负泊松比多孔材料力学性能及应用研究. 《固体力学学报》.
  84. 杨德庆,张相闻,吴秉鸿(2018). 负泊松比效应防护结构抗爆抗冲击性能影响因素. 《上海交通大学学报》.
  85. 钟山,秦浩星,杨德庆(2018). 指定拓扑基结构形状的任意泊松比超材料设计. 《武汉理工大学学报》.
  86. 杨德庆,任晨辉,吴秉鸿(2018). 超材料船体结构力学分析理论与方法. 《2018年全国固体力学学术会议摘要集(上)》.
  87. 秦浩星,杨德庆(2018). 任意负泊松比超材料结构设计的功能基元拓扑优化法. 《复合材料学报》.
  88. 秦浩星,杨德庆(2018). 多工况结构拓扑优化的灰色权重折衷规划模型法. 《力学季刊》.
  89. Nailong Wu, Zong-Lin Liu, Chao Wu, T. Ge, Deqing Yang (2018). Robust MRAC With Anti-Windup Compensator for the Depth Channel of an Autonomous Underwater Vehicle.
  90. Haoxing Qin, Deqing Yang, Chenhui Ren (2018). Modelling theory of functional element design for metamaterials with arbitrary negative Poisson's ratio. Computational materials science.DOI
  91. Nailong Wu, Chao Wu, T. Ge, Deqing Yang, Rui Yang (2018). Pitch Channel Control of a REMUS AUV with Input Saturation and Coupling Disturbances. Applied Sciences.DOI
  92. Nailong Wu, Meng Wang, T. Ge, Chao Wu, Deqing Yang, Rui Yang (2018). Experiments on high-performance maneuvers control for a work-class 3000-m remote operated vehicle. J. Syst. Control. Eng..DOI
  93. J. Ringsberg, B. Jang, Svein Erling Heggelund, Nana Homma, J. Jelovica, Yun-Tzu Huang, Jerolim Andrić, Y. Kawamura, Paul Lara, Matteo Sidari, J. Underwood, Jun Wang, Deqing Yang (2018). ISSC Technical Committee II.1 - Quasi-Static Response.DOI
  94. Haoxing Qin, Deqing Yang, Chenhui Ren (2018). Design Method of Lightweight Metamaterials with Arbitrary Poisson’s Ratio. Materials.DOI
  95. Qing Li, Deqing Yang (2018). Mechanical and Acoustic Performance of Sandwich Panels With Hybrid Cellular Cores. Journal of vibration and acoustics.DOI
  96. Chenhui Ren, Deqing Yang, Haoxing Qin (2018). Mechanical Performance of Multidirectional Buckling-Based Negative Stiffness Metamaterials: An Analytical and Numerical Study. Materials.DOI
  97. Zhi-Min Li, Tao Liu, Deqing Yang (2018). Postbuckling behavior of shear deformable anisotropic laminated cylindrical shell under combined external pressure and axial compression. Composite Structures.DOI
  98. 李清,杨德庆,郁扬(2017). 舰船低频水下辐射噪声数值计算方法对比研究. 《中国造船》.
  99. 霍发力,张健,杨德庆(2017). 工作水深对浮式平台波浪砰击影响的敏感性分析. 《上海交通大学学报》.
  100. 秦浩星,杨德庆(2017). 低频局域共振型负泊松比效应基座减振优化设计. 《中国力学大会-2017暨庆祝中国力学学会成立60周年大会》.
  101. 杨德庆,许子璇,高处(2017). 船舶声学包性能及配置优化设计. 《中国舰船研究》.
  102. 杨德庆,石嘉欣,郁扬(2017). 基于有限元—统计能量数值混响室法的声学包设计与优化. 《中国舰船研究》.
  103. 于汉,李清,杨德庆(2017). 水面舰船粘性流场和流噪声的数值计算. 《中国舰船研究》.
  104. 秦浩星,杨德庆,张相闻(2017). 负泊松比声学超材料基座的减振性能研究. 《振动工程学报》.
  105. Nailong Wu, T. Ge, Chao Wu, Deqing Yang, Rui Yang (2017). Water flow forecasting of underwater vehicle based on LDA compressed sensing. Annual Conference of the IEEE Industrial Electronics Society.DOI
  106. Jian-Hui Hu, Yue-Hong Yin, Wu-Jun Chen, Bing Zhao, Deqing Yang (2017). Nonlinear structural behavior of flat-patterning ETFE cushion structures: Experimental observations and numerical simulations.DOI
  107. Hui‐Shen Shen, Hai Wang, Deqing Yang (2017). Vibration of thermally postbuckled sandwich plates with nanotube-reinforced composite face sheets resting on elastic foundations. International Journal of Mechanical Sciences.DOI
  108. Hui‐Shen Shen, Xiao Qiao He, Deqing Yang (2017). Vibration of thermally postbuckled carbon nanotube-reinforced composite beams resting on elastic foundations. International Journal of Non-Linear Mechanics.DOI
  109. 杨德庆,郁扬(2016). 船舶振动及舱室噪声评价集成软件开发. 《计算机辅助工程》.
  110. 邱伟强,杨德庆,高处,孙利(2016). 基于拓扑优化的油船货舱结构设计研究. 《船舶》.
  111. 张相闻,杨德庆,胡志强(2016). 船舶碰撞事故数值模拟与评估通用流程. 《中国造船》.
  112. 郁扬,杨德庆,刘见华,石嘉欣(2016). 动载荷施加方式对船舶设备—基座系统建模方法的影响. 《中国舰船研究》.
  113. Fali Huo, Yan Nie, Deqing Yang, Gang Dong, Jin Tao Cui (2016). Sensitivity analysis of air gap motion with respect to wind load and mooring system for semi-submersible platform design. China Ocean Engineering.DOI
  114. Fali Huo, Deqing Yang, Yinzhi Zhao (2016). Vibration Reduction Design with Hybrid Structures and Topology Optimization.DOI
  115. Xiangwen Zhang, Deqing Yang (2016). Mechanical Properties of Auxetic Cellular Material Consisting of Re-Entrant Hexagonal Honeycombs. Materials.DOI
  116. Xiangwen Zhang, Deqing Yang (2016). Numerical Simulation of Vibration and Noise for Ship Collision.
  117. Zhi-Min Li, Deqing Yang (2016). Thermal postbuckling analysis of anisotropic laminated beams with tubular cross-section based on higher-order theory. Ocean Engineering.DOI
  118. Xiangwen Zhang, Deqing Yang (2016). Numerical and Experimental Studies of a Light-Weight Auxetic Cellular Vibration Isolation Base. Shock and Vibration.DOI
  119. 杨德庆,冯爱景,高处(2015). 面积约束下船舶舱室声学布局优化设计的理性准则法. 《上海交通大学学报》.
  120. 朱金文,杨德庆(2015). 非线性保守系统周期运动的Hermite插值解法. 《动力学与控制学报》.
  121. 杨德庆,马涛,张梗林(2015). 舰艇新型宏观负泊松比效应蜂窝舷侧防护结构. 《爆炸与冲击》.
  122. Deqing Yang, Guilian Yi, Jiapeng Cheng (2015). Multidisciplinary Design Optimization of Sound Radiation from Underwater Double Cylindrical Shell Structure.
  123. Fali Huo, Huixin Zhang, Deqing Yang, Jin Tao Cui (2015). Sensitivity Analysis of Non-Linear Air Gap and Wave Slamming Load with Respect to Current for Semi-Submersible Platform Design. The Twenty-fifth International Ocean and Polar Engineering Conference.
  124. Fali Huo, Huixin Zhang, Jian Suo, Deqing Yang, Jin Tao Cui (2015). Sensitivity analysis of wave slamming load with respect to wind load for semi-submersible platform design. Journal of Shanghai Jiaotong University (Science).DOI
  125. Hui‐Shen Shen, Deqing Yang (2015). Nonlinear vibration of functionally graded fiber reinforced composite laminated beams with piezoelectric fiber reinforced composite actuators in thermal environments. Engineering Structures.DOI
  126. 高处,杨德庆(2014). 船舶舱室噪声传递路径分析的声振熵赋权图法. 《上海交通大学学报》.
  127. 朱金文,杨德庆(2014). 带三次恢复力项频率依赖于速度的非线性振子研究. 《振动与冲击》.
  128. 杨德庆,朱金文(2014). 船舶舱室总体声学布局优化设计通用模型及解法. 《中国造船》.
  129. Hui‐Shen Shen, Deqing Yang (2014). Nonlinear vibration of functionally graded fiber-reinforced composite laminated cylindrical shells in hygrothermal environments. Applied Mathematical Modelling.DOI
  130. Hui‐Shen Shen, Deqing Yang (2014). Nonlinear vibration of anisotropic laminated cylindrical shells with piezoelectric fiber reinforced composite actuators. Ocean Engineering.DOI
  131. 蒋亚礼,杨德庆,林新志,鲍明慧(2012). 船舶通液管道振动噪声分析简易方法. 《中国造船》.
  132. 杨德庆,马涛,陈卫,林新志(2012). 船舶管线隔振支座布局优化设计的规范法. 《中国造船》.
  133. 吕林华,杨德庆(2012). 船舶钢-复合材料组合基座减振设计方法分析. 《上海交通大学学报》.
  134. Deqing Yang, Xiaolong Xie, Wei Chen (2012). Laminate component method for optimal design of hybrid structures for vibration reduction. Ships and Offshore Structures.DOI
  135. Deqing Yang (2012). Design Methods for Damping Materials Applied to Ships. Chinese Journal of Ship Research.
  136. 杨德庆,谢小龙,郭万涛(2011). 钢-复合材料组合结构材料选型优化设计映射解法. 《应用力学学报》.
  137. Zhi-Min Li, Deqing Yang (2011). Postbuckling of shear deformable stiffened anisotropic laminated cylindrical shell under axial compression. Ocean Engineering.DOI
  138. 陈刚,杨德庆,袁洪涛(2010). 深水半潜式钻井平台振动噪声预报全频域方法. 《中国造船》.
  139. 陈静,谢小龙,杨德庆(2010). 局部凹陷和偏心对接对海洋立管疲劳寿命影响的数值分析. 《计算机辅助工程》.
  140. Z.-M. Li, Deqing Yang (2010). Thermal Postbuckling Analysis of 3D Braided Composite Cylindrical Shells. Journal of Mechanics.DOI
  141. 杨德庆,常少游(2008). 舰艇外形雷达隐身设计特征面法. 《中国造船》.
  142. 吴刚,杨德庆(2008). 大型集装箱船振动及噪声数值计算建模方法研究. 《振动与冲击》.
  143. 郭凤骏,杨德庆(2008). 考虑振级落差要求的齿轮箱基座优化设计. 《船舶工程》.
  144. Deqing Yang, Feng-jun Guo (2008). Ship appearance optimal design on RCS reduction using response surface method and genetic algorithms. Journal of Shanghai Jiaotong University (Science).DOI
  145. Deqing Yang (2008). Optimization design of the gearbox mounting under vibration level difference constraints. Ship Engineering.
  146. Zhaocheng Xuan, Deqing Yang, Jian-Wen Peng (2007). An efficient method for computing local quantities of interest in elasticity based on finite element error estimation. Archive of Applied Mechanics.DOI
  147. Deqing Yang (2006). Research on the application of FDTD method to RCS analysis of naval vessels. Ship & Ocean Engineering.
  148. Deqing Yang (2005). Statistical Energy Analysis and Noise Reduction of FPSO. Noise and Vibration Control.
  149. 杨德庆(2003). 动响应约束下阻尼材料配置优化的拓扑敏度法. 《上海交通大学学报》.
  150. 杨德庆,柳拥军,金咸定(2003). 薄板减振降噪的拓扑优化设计方法. 《船舶力学》.
  151. 柳拥军,杨德庆(2002). 均匀分布荷载作用下压电悬臂梁弯曲问题解析解. 《固体力学学报》.
  152. 杨德庆,王德禹,刘洪林(2002). 舰艇振动声学特性数值分析. 《上海交通大学学报》.
  153. 杨德庆,郑靖明,王德禹,金咸定(2002). 基于SYSNOISE软件的船舶振动声学数值计算. 《中国造船》.
  154. 杨德庆,刘正兴,宣兆成(2001). 单侧接触约束下桁架拓扑优化的若干结果. 《固体力学学报》.
  155. 杨德庆,刘正兴(2000). 多工况应力约束下连续体结构拓扑优化映射变换解法. 《上海交通大学学报》.
  156. 隋允康,杨德庆,王备(2000). 多工况应力和位移约束下连续体结构拓扑优化. 《力学学报》.
  157. Deqing Yang, Sui Yunkang, Liu Zhengxing, Sun Huan-chun (2000). Topology optimization design of continuum structures under stress and displacement constraints. Applied Mathematics and Mechanics.DOI
  158. 杨德庆,刘正兴,隋允康(1999). 连续体结构拓扑优化设计的ICM方法. 《上海交通大学学报》.
  159. 隋允康,杨德庆,孙焕纯(1997). 最优目标敏度紧系的桁架几何两步优化方法. 《力学学报》.
  160. 杨德庆,隋允康(1997). 桁架拓扑优化设计密度变量的两种模式. 《力学与实践》.
  161. Yingying Zuo, Deqing Yang. Numerical calculation of impact vibration and impact noise in ship cabins by ISO tapping machine excitation.

此主页由公开资料整理,尚未经学者本人认领。