陈林根

期刊论文

1. 李婉峰，陈林根，戈延林，冯辉君（2026）. 内可逆闭式回热燃气轮机循环的五目标优化. 《热力透平》.DOI
2. 刁暄，陈林根，冯辉君，戈延林（2026）. 外接T形多孔肋片的圆柱产热体构形设计. 《节能》.
3. 吴梦豪，戈延林，陈林根，冯辉君（2026）. 等温加热修正Diesel循环最大有效生态学函数性能. 《节能》.
4. Yanju He, Hui-Jun Feng, Lingen Chen, Yan-Lin Ge (2026). Multi-objective constructal designs of composite heatsinks with microchannel and inner cylindrical porous-fin. International Communications in Heat and Mass Transfer.DOI
5. Lingen Chen, Xuetao Xi, Hui-Jun Feng, Yan-Lin Ge (2026). A proposed stacked-chip with dual-layer radial-pattern high-thermal-conductivity channel and its constructal designs for improving heat dissipation and thermodynamic performances. International Communications in Heat and Mass Transfer.DOI
6. Lingen Chen, Wenlong Zhang, Shuwen Gong, Hui-Jun Feng, Yan-Lin Ge (2026). Constructal design for cylinder heat source considering minimum hotspot temperature under natural convection. Journal of the Brazilian Society of Mechanical Sciences and Engineering.DOI
7. Lingen Chen, Shuangshuang Shi, Yan-Lin Ge, Hui-Jun Feng (2026). Endoreversible modeling, optimization and 3-D graphical illustration for a non-isothermal three-reservoir chemical pump based on Lewis criterion. Case Studies in Thermal Engineering.DOI
8. Tian Xie, Lingen Chen, Hui-Jun Feng, Yan-Lin Ge (2026). A new composite heat-dissipation structure consists of Phi-shaped high-thermal-conductivity channel and T-shaped fin and its constructal designs. International Journal of Heat and Mass Transfer.DOI
9. Tingfang Ming, Hui-Jun Feng, Lingen Chen, Yan-Lin Ge, Shaojun Xia (2026). Multi-objective constructal designs of a radiator with rectangular cooling channels and porous fins via composite-function, ANN and NSGA-II. International Communications in Heat and Mass Transfer.DOI
10. Congzheng Qi, Lingen Chen, Yan-Lin Ge, Hui-Jun Feng (2026). Thermodynamic optimization for dye-sensitized solar cell-thermoelectric generator hybrid device with external and internal irreversibilities. International Journal of Heat and Mass Transfer.DOI
11. Shuangshuang Shi, Lingen Chen, Yan-Lin Ge, Hui-Jun Feng (2026). Exergy-based ecological performance analyses and multi-objective optimizations for an endoreversible three-reservoir chemical potential transformer. Case Studies in Thermal Engineering.DOI
12. Yuan-Wan Li, Yan-Lin Ge, Lingen Chen, Hui-Jun Feng, Shaojun Xia (2026). Analyses of cost of energy and multi-objective optimizations for single-stage thermoelectric coolers. Journal of Non-Equilibrium Thermodynamics.DOI
13. Yuchen Zhao, Yong Yin, Lingen Chen, Hui-Jun Feng, Yan-Lin Ge (2026). Constructal designs for Y-shaped porous ribs under forced convection via minimum composite-function and bi-objective-optimization. International Communications in Heat and Mass Transfer.DOI
14. 席雪涛，冯辉君，陈林根，戈延林（2025）. 基于耗散率最小的三维电子器件内树形高导热通道构形设计. 《节能》.
15. 薛晓庆，戈延林，陈林根，冯辉君（2025）. 最大有效功率和最大功率下内可逆Rallis循环的性能比较. 《节能》.
16. Lingen Chen, Tian Xie, Fengyi Zhang, Hui-Jun Feng, Yan-Lin Ge (2025). Proposal of two kinds of composite heat-dissipation structures composed of high-conductivity-channels and T-shaped fins and their constructal designs. Case Studies in Thermal Engineering.DOI
17. Xiaoxu Shen, Yan-Lin Ge, Lingen Chen, Hui-Jun Feng (2025). Efficient-power analysis and multi-objective optimizations for irreversible Diesel-cycle via finite-piston-speed and finite-time thermodynamics with three variables and four objectives. Journal of Thermal Analysis and Calorimetry.DOI
18. Yanhao Song, Hui-Jun Feng, Lingen Chen, Yan-Lin Ge (2025). Constructal design of a composite heatsink with microchannels and arrow-shaped inner fins based on entransy theory. Journal of Thermal Analysis and Calorimetry.DOI
19. Hongwei Zhu, Lingen Chen, Hui-Jun Feng, Yan-Lin Ge (2025). Multi-objective constructal designs for fork-shaped cavities with minimizing maximum-temperature-difference and entropy-generation-rate. Thermal Science and Engineering Progress.DOI
20. Haiwen Ma, Peng Liu, Lu Huang, Yanlin Ge, Lingen Chen (2025). Performance analysis and heat transfer multi-objective optimization of parabolic trough receiver with annular sector inserts. Science China Technological Sciences.DOI
21. Wanfeng Li, Lingen Chen, Yan-Lin Ge, Hui-Jun Feng (2025). Efficient power performance analyses and multi-objective optimizations for closed regenerative gas turbine cycle based on five objectives and NSGA-II. Energy.DOI
22. Congzheng Qi, Lingen Chen, Hui-Jun Feng, Yan-Lin Ge, Xubing Chen (2025). Modeling and performance evaluation for solar thermoelectric generator with variable-temperature heat sink. Applied Thermal Engineering.DOI
23. Yiwen Su, Lingen Chen, Yan-Lin Ge, Shuangshuang Shi, Hui-Jun Feng (2025). Efficient-ecological-function analyses and multi-objective optimizations for generalized irreversible Carnot heat pumps. Physica A: Statistical Mechanics and its Applications.DOI
24. H.-S. Feng, Yan-Lin Ge, Lingen Chen, Hui-Jun Feng (2025). An air-standard isothermal-heating modified Atkinson-cycle and its performance optimizations with five objectives and NSGA-II. Journal of Non-Equilibrium Thermodynamics.DOI
25. Cheng-Hai Hu, Lingen Chen, Yan-Lin Ge, Hui-Jun Feng (2025). Single-, two-, three-, and four-objective optimizations for an irreversible vacuum thermionic generator via finite-time thermodynamics, NSGA-II and three decision-making techniques.DOI
26. Lingen Chen, Tian Xie, Fengyi Zhang, Hui-Jun Feng, Yan-Lin Ge (2025). Constructal design for a clover-shaped high conductivity channel in a square heat generating body. Case Studies in Thermal Engineering.DOI
27. Lingen Chen, Tan Wang, Yan-Lin Ge, Hui-Jun Feng (2025). Power-maximization of an irreversible simple Brayton cycle space nuclear power plant. Progress in nuclear energy (New series).DOI
28. Jun Zhao, Yan-Lin Ge, Lingen Chen, Hui-Jun Feng (2025). Isothermal-heating modified Miller-cycle model and its performance multi-objective optimizations with four objectives. Journal of Thermal Analysis and Calorimetry.DOI
29. Bowen Wu, Lingen Chen, Yan-Lin Ge, Hui-Jun Feng, Xu Liu (2025). Finite-time thermodynamic multi-objective optimizations for an irreversible simple Brayton refrigeration cycle based on four objectives, NASG-II algorithm and three decision-making strategies. Journal of Thermal Analysis and Calorimetry.DOI
30. Congzheng Qi, Lingen Chen, Hui-Jun Feng, Yan-Lin Ge, Xubing Chen (2025). Ecological performance analyses and multi-objective optimizations for thermal-Brownian-engine with external heat-transfer. Journal of Non-Equilibrium Thermodynamics.DOI
31. Xiaoqing Xue, Yan-Lin Ge, Lingen Chen, Hui-Jun Feng, Jiwen Zhang (2025). Finite-time thermodynamic modeling, analysis and four-objective optimizations for Rallis cycle with NSGA-II and multiple decision-making methods. Energy.DOI
32. Yong Yin, Xinting Fang, Lingen Chen, Yan-Lin Ge (2025). Optimal performance of irreversible quantum Stirling refrigerator with extreme relativistic particles as working substance. Physica A: Statistical Mechanics and its Applications.DOI
33. Yiwen Su, Lingen Chen, Yan-Lin Ge, Hui-Jun Feng (2025). Efficient ecological function optimization for endoreversible Carnot heat pumps. Journal of Non-Equilibrium Thermodynamics.DOI
34. Lingen Chen, Congzheng Qi, Yan-Lin Ge, Hui-Jun Feng (2025). Equivalent combined cycle modelling for three-heat-reservoir thermal Brownian heat pump with heat-transfer effect and its optimal performance. Science China Technological Sciences.DOI
35. Xuan Diao, Hui-Jun Feng, Lingen Chen, Yan-Lin Ge, Bowen Wu (2025). Constructal design of a T-shaped porous fin adopting minimum composite function, ANN and NSGA-II. International Communications in Heat and Mass Transfer.DOI
36. Lingen Chen, Wenlong Zhang, Shuwen Gong, Hui-Jun Feng, Yan-Lin Ge (2025). Constructal cylinder heat source aiming at minimum hotspot temperature under forced convection. Journal of Thermal Analysis and Calorimetry.DOI
37. Yan-Lin Ge, Lingen Chen, Hui-Jun Feng (2025). Finite-piston-speed and finite-time thermodynamic optimizations for irreversible Brayton, Dual and Miller cycles with multiple performance indicators. Applied Thermal Engineering.DOI
38. Yanju He, Yan-Lin Ge, Lingen Chen, Hui-Jun Feng (2025). Exergy-based efficient ecological-function optimization for endoreversible Carnot refrigerators. Journal of Non-Equilibrium Thermodynamics.DOI
39. Wenhao Yang, Hui-Jun Feng, Lingen Chen, Yan-Lin Ge (2025). Constructal thermodynamic multi-objective-optimization for a dual-pressure solar ocean thermal-energy-conversion system with NGSA-II algorithm and three decision-making approaches. Case Studies in Thermal Engineering.DOI
40. Wenlong Zhang, Lingen Chen, Hui-Jun Feng, Yan-Lin Ge (2025). Constructal design of two-stage combined t-y-shaped fin considering minimization of maximum thermal resistance. Thermal Science and Engineering Progress.DOI
41. Shuangshuang Shi, Lingen Chen, Yan-Lin Ge, Hui-Jun Feng (2025). Modeling and optimization of an endoreversible non-isothermal chemical pump cycle via Onsager equations. Applied Thermal Engineering.DOI
42. Menghao Wu, Yan-Lin Ge, Lingen Chen, Hui-Jun Feng, Bowen Wu (2025). Efficient-ecological-function analyses and multi-objective optimizations for generalized irreversible Carnot refrigerator via NSGA-Ⅱ, three decision-making-methods and Finite-Time Thermodynamics. Thermal Science and Engineering Progress.DOI
43. 李婉峰，陈林根，戈延林，冯辉君，齐丛正（2024）. 闭式简单燃气轮机循环生态学有效功率特性. 《热力透平》.
44. 孔锐，陈林根，夏少军，李鹏蕾，戈延林（2024）. 不同吹扫模式下HI分解膜反应器多目标性能优化. 《工程热物理学报》.
45. 王倓，陈林根，戈延林（2024）. 恒温热源空间不可逆闭式简单燃气轮机循环功率优化. 《工程热物理学报》.
46. 李云峰，谢志辉，陈林根，冯辉君（2024）. 圆柱发热体内圆截面液冷通道的构形优化. 《工程热物理学报》.
47. 齐丛正，陈林根，戈延林，冯辉君（2024）. 三热源热布朗热变换器的生态学最优性能. 《工程热物理学报》.
48. 刘鹏，马海文，巫云雷，陈林根（2024）. 带翅片双层管槽式太阳能梯级集热系统性能分析. 《工程热物理学报》.
49. Bowen Wu, Hui-Jun Feng, Lingen Chen, Yan-Lin Ge, Xiaoye Liu（2024）. 基于火积耗散率和泵耗功率目标的三维电子器件内复合热沉多目标构形优化. Scientia Sinica Technologica.DOI
50. 刘旭，戈延林，陈林根，冯辉君（2024）. 变温热源内可逆Braysson循环性能分析与优化. 《热力透平》.
51. 危思，戈延林，陈林根，冯辉君（2024）. 空气标准等温加热修正Brayton循环:(2)多目标优化. 《热力透平》.
52. 陈林根，冯辉君，谢志辉，夏少军，戈延林，刘鹏，章先涛（2024）. 能量利用系统的构形热力学优化理论——研究进展与太阳能驱动热电冷氢联产系统优化应用初探. 《武汉工程大学学报》.
53. 沈孝雪，戈延林，陈林根，冯辉君，齐丛正，吴恒（2024）. 有限活塞速度不可逆Otto循环最大有效功率性能研究. 《节能》.
54. 徐子健，戈延林，陈林根，齐丛正，吴迪（2024）. 基于最大生态学有效功率的内可逆Otto循环性能比较分析. 《节能》.
55. 马海文，陈林根，刘鹏，戈延林，齐丛正（2024）. 汤姆逊效应和外部传热对两级热电发电机驱动两级热电制冷机联合装置性能的影响. 《节能》.
56. 吴迪，戈延林，陈林根，冯辉君（2024）. 考虑非理想气体工质影响的不可逆Otto循环单、双、三和四目标性能优化. 《节能》.
57. 王伟基，陈林根，戈延林，任葶葶，冯辉君（2024）. 等温加热修正Atkinson循环及其内可逆特性. 《节能》.
58. 宋焱豪，戈延林，陈林根，危思，冯辉君（2024）. 内可逆Ericsson循环最大生态学有效功率性能. 《节能》.
59. 席雪涛，戈延林，陈林根，张继文，冯辉君（2024）. 工质线性变比热对内可逆Rallis循环功率效率性能的影响. 《节能》.
60. 陈茂，戈延林，陈林根，谢志辉，施双双（2024）. 具有非理想气体工质的内可逆Miller循环功率效率特性. 《节能》.
61. 吴迪，戈延林，陈林根，冯辉君（2024）. 具有非理想气体工质的内可逆和不可逆Atkinson循环最优性能. 《电站系统工程》.
62. 巫云雷，戈延林，刘鹏，陈林根，齐丛正，刘旭（2024）. 内可逆闭式Braysson循环生态学有效功率特性. 《电站系统工程》.
63. 赵俊，戈延林，陈林根，徐开云，施双双（2024）. 内可逆等温加热修正Miller循环功率效率特性. 《电站系统工程》.
64. 冯昊胜，戈延林，陈林根，徐开云，冯辉君（2024）. 最大有效功率时等温加热修正内可逆Diesel循环性能. 《电站系统工程》.
65. Lingen Chen, Yan-Lin Ge, Shuangshuang Shi, Hui-Jun Feng, Peng Liu (2024). Exergetic efficiency and exergy-based ecological function performance optimizations for two irreversible simple Brayton refrigeration cycle models. Results in Engineering.DOI
66. Jun Li, Lingen Chen (2024). Thermal and electrical properties of photovoltaic cell with linear phenomenological heat transfer law. Journal of Non-Equilibrium Thermodynamics.DOI
67. Zi-Jian Xu, Yan-Lin Ge, Lingen Chen, Hui-Jun Feng (2024). Efficient ecological function analysis and multi-objective optimizations for an endoreversible simple air refrigerator cycle. Journal of Non-Equilibrium Thermodynamics.DOI
68. Lingen Chen, Shaojun Xia (2024). Power maximization for multistage endoreversible non-isothermal-chemical-engine based on Lewis analogy. International Communications in Heat and Mass Transfer.DOI
69. Zhisong Dan, Hui-Jun Feng, Lingen Chen, Yan-Lin Ge (2024). Multi-objective constructal design of a printed circuit cooler for S-CO2 cycle. Journal of Thermal Analysis and Calorimetry.DOI
70. Si-Hang Wei, Yan-Lin Ge, Lingen Chen, Hui-Jun Feng (2024). Performance analysis and multi-objective optimization of an irreversible isothermal heating modified air standard Brayton cycle. Results in Engineering.DOI
71. Jialuo Huang, Shaojun Xia, Lingen Chen (2024). Optimal configurations of ammonia decomposition reactor with minimum power consumption and minimum heat transfer rate. Energy.DOI
72. Di Wu, Yan-Lin Ge, Lingen Chen, Shuangshuang Shi, Hui-Jun Feng (2024). Performance analysis and multi-objective optimization of irreversible Diesel cycle with non-ideal gas working fluid. Journal of Thermal Analysis and Calorimetry.DOI
73. Kai Xu, Yan-Lin Ge, Lingen Chen, Hui-Jun Feng (2024). A modified Diesel cycle via isothermal heat addition, its endoreversible modelling and multi-objective optimization. Energy.DOI
74. Lu Huang, Peng Liu, Cheng-Long Qin, Chengxiang Gui, Xian-Tao Zhang, Tingting Ren, Yan-Lin Ge, Ying Yu, Zhichun Liu, Lingen Chen (2024). Solar-driven hydrogen production based on moisture adsorption-desorption cycle. Nano Energy.DOI
75. Chuang Tang, Hui-Jun Feng, Lingen Chen, Shan-Lin Liu, Yan-Lin Ge (2024). Optimal design of a dual-pressure radial-inflow turbine for S-CO2 cycle based on constructal theory. Results in Engineering.DOI
76. Lingen Chen, Congzheng Qi, Yan-Lin Ge, Hui-Jun Feng (2024). Three-heat-reservoir thermal Brownian heat pump and its performance limits. Case Studies in Thermal Engineering.DOI
77. Yunlei Wu, Peng Liu, Lu Huang, Yan-Lin Ge, Lingen Chen (2024). Heat transfer performance of supercritical CO2 in a vertical U-tube. Applied Thermal Engineering.DOI
78. Lingen Chen, Hui-Jun Feng, Fengyi Zhang, Yan-Lin Ge (2024). Constructal design for composite heat dissipating structure composed of an “arrow”-shaped high conductivity channel and an externally connected “T”-shaped fin. International Communications in Heat and Mass Transfer.DOI
79. Xu Liu, Yan-Lin Ge, Lingen Chen, Shuangshuang Shi, Hui-Jun Feng (2024). Multi-objective optimization for an irreversible Braysson cycle. Journal of Thermal Analysis and Calorimetry.DOI
80. Tian Xie, Lingen Chen, Hui-Jun Feng, Yan-Lin Ge (2024). Constructal design for a composite structure with an “X”-shaped high conductivity channel and a “T”-shaped fin. International Communications in Heat and Mass Transfer.DOI
81. Shuangshuang Shi, Lingen Chen, Yan-Lin Ge, Hui-Jun Feng (2024). Performance optimization of non-isothermal endoreversible chemical pump via Lewis analogy. Energy.DOI
82. Hui-Jun Feng, Zhiming Zhang, Lingen Chen, Yan-Lin Ge (2024). Constructal design for H-shaped compound heat transfer path in a rectangular heat generation body. International Journal of Heat and Mass Transfer.DOI
83. Wenlong Zhang, Lingen Chen, Hui-Jun Feng, Yan-Lin Ge (2024). Adding branched fin angle as degree-of-freedom improves performance of a T-Y-shaped fin. Case Studies in Thermal Engineering.DOI
84. Hongwei Zhu, Lingen Chen, Hui-Jun Feng, Yan-Lin Ge (2024). Constructal design of comb-shaped high thermal conductivity channel in a stacked chip. International Communications in Heat and Mass Transfer.DOI
85. Lingen Chen, Shaojun Xia, Shuangshuang Shi (2024). Minimum entropy generation paths for generalized radiative heat transfer processes with heat leakage. Results in Engineering.DOI
86. Bowen Wu, Hui-Jun Feng, Lingen Chen, Yan-Lin Ge, Xiaoye Liu (2024). Constructal design of a hybrid heat sink with rectangular microchannel and porous fin in a 3D electronic device with artificial neural-network, NSGA-II and different decision-making methods. International Communications in Heat and Mass Transfer.DOI
87. Lingen Chen, Hongwei Zhu, Yan-Lin Ge, Shuangshuang Shi, Hui-Jun Feng (2024). Multi-objective constructal design for quadrilateral heat generation body based on thermal-entransy theory and NSGA-II. Science China Technological Sciences.DOI
88. Xuetao Xi, Hui-Jun Feng, Lingen Chen, Yan-Lin Ge (2024). A tree-shaped high thermal conductivity channel in a stacked chip with minimizing maximum temperature difference and entropy generation rate. Case Studies in Thermal Engineering.DOI
89. Congzheng Qi, Lingen Chen, Yan-Lin Ge, Hui-Jun Feng (2024). Equivalent combined cycle modeling and performance optimization for a three-heat-reservoir thermal Brownian heat transformer with external heat-transfer. Energy.DOI
90. Haiwen Ma, Peng Liu, Lu Huang, Tingting Ren, Yan-Lin Ge, Lingen Chen (2024). Heat transfer enhancement in parabolic trough receiver based on exergy destruction minimization. Energy.DOI
91. 陈林根（2023）. 内燃机循环热力学优化理论. 《科学出版社》.
92. 吴志祥，冯辉君，陈林根，戈延林（2023）. 基于热效率最大的卡琳娜–有机朗肯联合循环构形热力学优化. 《工程热物理学报》.
93. 金晴龙，夏少军，陈林根，黄佳洛，谢志辉（2023）. 预热型S-CO2循环生态学函数分析与优化. 《工程热物理学报》.
94. 齐丛正，陈林根，戈延林（2023）. 三热源热布朗制冷机的生态学最优性能. 《工程热物理学报》.
95. 王倓，陈林根，戈延林（2023）. 内可逆空间闭式简单布雷顿循环模型及其最优性能. 《工程热物理学报》.
96. 汤创，陈林根，冯辉君，戈延林（2023）. 高导热材料非均匀分布对■耗散率最小化矩形单元体构形的影响. 《节能》.
97. 伍博文，陈林根，戈延林，殷勇（2023）. εR最大时内可逆简单空气制冷循环的ε和R. 《节能》.
98. 吴迪，戈延林，陈林根，冯辉君（2023）. 具有非理想气体工质的往复式Brayton循环多目标优化. 《电力与能源》.
99. 危思，戈延林，陈林根，冯辉君（2023）. 空气标准等温加热修正Brayton循环：(1)功率效率特性分析. 《热力透平》.
100. 伍博文，陈林根，殷勇，戈延林（2023）. 可逆简单空气制冷循环品质因子优化. 《大学物理》.
101. 陈茂，戈延林，陈林根，谢志辉，施双双（2023）. 具有非理想气体工质的内可逆Dual循环最优性能. 《大学物理》.
102. 谢心怡，陈林根，殷勇，魏轩宇，杜元开（2023）. 不可逆量子矩形循环的功率、效率和有效功率分析与优化. 《节能》.
103. 吴迪，戈延林，陈林根，田雷（2023）. 非理想气体工质对内可逆Otto循环功率、效率性能的影响. 《节能》.
104. Congzheng Qi, Yuxuan Du, Lingen Chen, Yong Yin, Yan-Lin Ge (2023). Modeling and thermodynamic optimization of a solar-driven two-stage multi-element thermoelectric generator. Journal of Cleaner Production.DOI
105. Lingen Chen, Shuangshuang Shi, Yan-Lin Ge, Hui-Jun Feng (2023). Power density performances and multi-objective optimizations for an irreversible Otto cycle with five specific heat models of working fluid. Energy.DOI
106. Lingen Chen, Fuli Zhu, Shuangshuang Shi, Yan-Lin Ge, Hui-Jun Feng (2023). Power and efficiency optimizations of Maisotsenko-Atkinson, Dual and Miller cycles and performance comparisons with corresponding traditional cycles. Science China Technological Sciences.DOI
107. Jiwen Zhang, Hui-Jun Feng, Lingen Chen, Yan-Lin Ge (2023). Constructal design of a rectangular parallel phase change microchannel in a three-dimensional electronic device. Science China Technological Sciences.DOI
108. Congzheng Qi, Lingen Chen, Yan-Lin Ge, Hui-Jun Feng (2023). Heat transfer effect on the performance of three-heat-reservoir thermal Brownian refrigerator. Journal of Non-Equilibrium Thermodynamics.DOI
109. Lingen Chen, Yan-Lin Ge, Hui-Jun Feng, Tingting Ren (2023). Energy and exergy analyses and optimizations for two-stage TEC driven by two-stage TEG with Thomson effect. Science China Technological Sciences.DOI
110. Peng Liu, Tingting Ren, Yan-Lin Ge, Wei Liu, Lingen Chen (2023). Performance analyses of a novel finned parabolic trough receiver with inner tube for solar cascade heat collection. Science China Technological Sciences.DOI
111. Xiaoye Liu, Hui-Jun Feng, Lingen Chen, Yan-Lin Ge (2023). Constructal design of a rectangular porous fin considering minimization of maximum temperature difference and pumping power consumption. Science China Technological Sciences.DOI
112. Di Wu, Yan-Lin Ge, Lingen Chen, Lei Tian (2023). Effect of non-ideal gas working fluid on power and efficiency performances of an irreversible Otto cycle. Journal of Non-Equilibrium Thermodynamics.DOI
113. Lingen Chen, Shuangshuang Shi, Yan-Lin Ge, Hui-Jun Feng (2023). Performance optimization of diffusive mass transfer law irreversible isothermal chemical pump. Energy.DOI
114. Zhisong Dan, Hui-Jun Feng, Lingen Chen, Nai-bing Liao, Yan-Lin Ge (2023). Constructal design of printed circuit recuperator for S-CO_2 cycle via multi-objective optimization algorithm. Science China Technological Sciences.DOI
115. Congzheng Qi, Lingen Chen, Yan-Lin Ge, Hui-Jun Feng (2023). Three-heat-reservoir thermal Brownian heat transformer and its performance limits. Physica A: Statistical Mechanics and its Applications.DOI
116. Yan-Lin Ge, Heng-Liang Wu, Lingen Chen, Hui-Jun Feng, Zhihui Xie (2023). Finite time and finite speed thermodynamic optimization for an irreversible Atkinson cycle. Energy.DOI
117. Lingen Chen, Shuangshuang Shi, Yan-Lin Ge, Hui-Jun Feng (2023). Ecological function performance analysis and multi-objective optimization for an endoreversible four-reservoir chemical pump. Energy.DOI
118. Lingen Chen, Yan-Lin Ge (2023). Finite Time Thermodynamic Optimization for Air Standard Thermal Power Cycles.DOI
119. Wenhao Yang, Hui-Jun Feng, Lingen Chen, Yan-Lin Ge (2023). Power and efficiency optimizations of a simple irreversible supercritical organic Rankine cycle. Energy.DOI
120. Zhengguo Gong, Yan-Lin Ge, Lingen Chen, Hui-Jun Feng (2023). Multi-objective optimization of an endoreversible closed Atkinson cycle. Journal of Non-Equilibrium Thermodynamics.DOI
121. Lingen Chen, Shaojun Xia (2023). Power maximization for a discrete-model of multistage dynamic irreversible isothermal-chemical-engine with linear mass-transfer law. International Communications in Heat and Mass Transfer.DOI
122. Ting-Ting Ren, Lu Huang, Shangzhen Xie, Guo-Peng Chen, P. Liu, Lingen Chen (2023). Photothermal hygroscopic hydrogel for simultaneous generation of clean water and electricity. Science China Technological Sciences.DOI
123. Lingen Chen, Hui-Jun Feng, Yan-Lin Ge, Shuangshuang Shi (2023). Power and efficiency optimizations for an open cycle two-shaft gas turbine power plant. Propulsion and Power Research.DOI
124. Hui-Jun Feng, Lingen Chen, Yan-Lin Ge (2023). Constructal optimization of a rectangular non-uniform heat generation area with irregular high thermal conductivity material. Case Studies in Thermal Engineering.DOI
125. 刘晓业，戈延林，陈林根，施双双，谢志辉（2022）. 内可逆Dual-Miller循环功率密度分析. 《节能》.
126. 石俊朝，冯辉君，陈林根，戈延林（2022）. 太阳能海洋热能转换系统中平板集热器构形设计. 《中国科学:技术科学》.
127. 陈林根，冯辉君，吴志祥，唐威，谢卓君，戈延林（2022）. 船海用蒸汽动力装置构形优化理论研究进展. 《中国科学:技术科学》.
128. 张继文，戈延林，陈林根，巩启锐（2022）. 内可逆Rallis循环的最优功率和效率性能研究. 《节能》.
129. 巩启锐，戈延林，陈林根，施双双，冯辉君（2022）. 工质线性变比热内可逆矩形循环功率密度和有效功率特性. 《节能》.
130. 刘旭，戈延林，陈林根，邱幸付，何金虎（2022）. 内可逆闭式Braysson循环单、双、三和四目标优化. 《热力透平》.
131. 龚政，戈延林，陈林根（2022）. 内可逆闭式Atkinson循环的最大有效功率研究. 《节能》.
132. 杨爱波，陈林根，冯辉君，戈延林（2022）. 基于换热率最大的翅针单列热沉构形优化. 《工程热物理学报》.
133. 尤江，陈林根，冯辉君，童大鹏，陈霁恒（2022）. 非均匀产热圆盘辐射状和树状冷却流道构形设计. 《工程热物理学报》.
134. 尤江，陈林根，冯辉君，童大鹏，陈霁恒，丁志龙（2022）. 内嵌冷却流道的双梯形非均匀产热体构形设计. 《工程热物理学报》.
135. 齐丛正，陈林根，戈延林，冯辉君（2022）. 广义不可逆热布朗热机的生态学优化. 《工程热物理学报》.
136. Congzheng Qi, Lingen Chen, Shang-Zhe Xie, Yan-Lin Ge, Hui-Jun Feng（2022）. 传热对热布朗热泵性能的影响. Scientia Sinica Technologica.DOI
137. 施双双，戈延林，陈林根（2022）. 不可逆往复式Brayton循环性能分析与优化：(2)多目标优化. 《热力透平》.
138. 施双双，戈延林，陈林根（2022）. 不可逆往复式Brayton循环性能分析与优化：(1)功率密度分析. 《热力透平》.
139. 王倓，戈延林，陈林根，冯辉君（2022）. 空间动力装置用内可逆Brayton循环功率优化. 《热力透平》.
140. 邱肃肃，陈林根，丁泽民，戈延林（2022）. 太阳能驱动单级异质结热离子发电装置性能优化. 《中国科学:技术科学》.
141. 何金虎，戈延林，陈林根，施双双，李芳（2022）. 不可逆单谐振能量选择性电子热机有效功率特性. 《节能》.
142. 朱鸿威，陈林根，冯辉君，戈延林（2022）. 叶形四边形产热体■耗散率最小导热构形优化. 《中国科学:技术科学》.
143. 丁佳，殷勇，陈林根，戈延林，刘存（2022）. 量子狄塞尔热泵循环性能分析. 《武汉工程大学学报》.
144. Hongwei Zhu, Lingen Chen, Yan-Lin Ge, Shuangshuang Shi, Hui-Jun Feng (2022). Multi-Objective Constructal Design for Quadrilateral Heat Generation Body with Vein-Shaped High Thermal Conductivity Channel. Entropy.DOI
145. Peng-Chao Zang, Lingen Chen, Yan-Lin Ge (2022). Maximizing Efficient Power for an Irreversible Porous Medium Cycle with Nonlinear Variation of Working Fluid’s Specific Heat. Energies.DOI
146. Hao-Ran Xu, Lingen Chen, Yan-Lin Ge, Hui-Jun Feng (2022). Four-Objective Optimization of an Irreversible Stirling Heat Engine with Linear Phenomenological Heat-Transfer Law. Entropy.DOI
147. X. Qiu, Lingen Chen, Yan-Lin Ge, Shuangshuang Shi (2022). Efficient Power Characteristic Analysis and Multi-Objective Optimization for an Irreversible Simple Closed Gas Turbine Cycle. Entropy.DOI
148. Lingen Chen, K. Ma, Hui-Jun Feng, Yan-Lin Ge (2022). Optimal piston motion paths for a light-driven engine with generalized radiative law and maximum ecological function. Case Studies in Thermal Engineering.DOI
149. Lingen Chen, Shuangshuang Shi, Hui-Jun Feng, Yan-Lin Ge (2022). Maximum ecological function performance for a three-reservoir endoreversible chemical pump. Journal of Non-Equilibrium Thermodynamics.DOI
150. Jinhu He, Lingen Chen, Yan-Lin Ge, Shuangshuang Shi, Fangfang Li (2022). Multi-Objective Optimization of an Irreversible Single Resonance Energy-Selective Electron Heat Engine. Energies.DOI
151. Lei Tian, Lingen Chen, Yan-Lin Ge, Shuangshuang Shi (2022). Maximum Efficient Power Performance Analysis and Multi-Objective Optimization of Two-Stage Thermoelectric Generators. Entropy.DOI
152. Tingting Ren, Zhi-Qiang Zhu, Lingen Chen, Yan-Lin Ge, Lu Huang, Shangzhen Xie, Peng Liu (2022). Numerical simulation of flow resistance characteristics in a rod bundle channel under vertical and inclined conditions. Progress in nuclear energy (New series).DOI
153. Qingkun Wu, Lingen Chen, Yan-Lin Ge, Shuangshuang Shi (2022). Multi-objective optimization of endoreversible magnetohydrodynamic cycle. Energy Reports.DOI
154. Lei Tian, Lingen Chen, Tingting Ren, Yan-Lin Ge, Hui-Jun Feng (2022). Optimal distribution of heat exchanger area for maximum efficient power of thermoelectric generators. Energy Reports.DOI
155. Lingen Chen, G. Lorenzini (2022). Five performance indicators for a universal generalized irreversible steady flow cycle including seven specific refrigeration cycles. The European Physical Journal Plus.DOI
156. Peng-Chao Zang, Lingen Chen, Yan-Lin Ge, Shuangshuang Shi, Hui-Jun Feng (2022). Four-Objective Optimization for an Irreversible Porous Medium Cycle with Linear Variation in Working Fluid’s Specific Heat. Entropy.DOI
157. Hui-Jun Feng, Kun Sun, Lingen Chen, Yan-Lin Ge (2022). Constructal design of a nanofluid cooling channel with sidewall ribs and cavities in a rectangular heat generation body. Case Studies in Thermal Engineering.DOI
158. X. Qiu, Lingen Chen, Yan-Lin Ge, Qirui Gong, Hui-Jun Feng (2022). Efficient power analysis and five-objective optimization for a simple endoreversible closed Brayton cycle. Case Studies in Thermal Engineering.DOI
159. Haoran Xu, Lingen Chen, Yan-Lin Ge, Hui-Jun Feng (2022). Multi-objective optimization of Stirling heat engine with various heat and mechanical losses. Energy.DOI
160. Lingen Chen, Shaojun Xia (2022). Maximum Profit Output Configuration of Multi-Reservoir Resource Exchange Intermediary. Entropy.DOI
161. Qingkun Wu, Lingen Chen, Yan-Lin Ge, Hui-Jun Feng (2022). Four-Objective Optimization of an Irreversible Magnetohydrodynamic Cycle. Entropy.DOI
162. Hui-Jun Feng, Lingen Chen, Wei Tang, Yan-Lin Ge (2022). Optimal Design of a Dual-Pressure Steam Turbine for Rankine Cycle Based on Constructal Theory. Energies.DOI
163. Jinhu He, Lingen Chen, Yan-Lin Ge, Shuangshuang Shi, Fangfang Li (2022). Four-Objective Optimizations of a Single Resonance Energy Selective Electron Refrigerator. Entropy.DOI
164. Congzheng Qi, Lingen Chen, Yan-Lin Ge, Wenhao Yang, Hui-Jun Feng (2022). Three-heat-reservoir thermal Brownian refrigerator and its performance limits. The European Physical Journal Plus.DOI
165. Fan Jiang, F. Meng, Lingen Chen, Zhaojun Chen (2022). Thermodynamic Analysis and Experimental Research of Water-Cooled Small Space Thermoelectric Air-Conditioner. Journal of Thermal Science.DOI
166. Hongwei Zhu, Lingen Chen, Yan-Lin Ge, Shuangshuang Shi, Hui-Jun Feng (2022). Multi-Objective Constructal Design for Square Heat-Generation Body with “Arrow-Shaped” High-Thermal-Conductivity Channel. Energies.DOI
167. Hui-Jun Feng, Lingen Chen, Fengyi Zhang, Yan-Lin Ge (2022). Constructal design of a fan-shaped high thermal conductivity path in a square heat generation body. Case Studies in Thermal Engineering.DOI
168. Xiaohong Liu, Qirui Gong, Lingen Chen, Yan-Lin Ge (2022). Multi-objective optimization and performance analyses of an endoreversible rectangular cycle. Energy Reports.DOI
169. Congzheng Qi, Lingen Chen, Yan-Lin Ge, Wenhao Yang, Hui-Jun Feng (2022). Thermal Brownian heat pump with external and internal irreversibilities. The European Physical Journal Plus.DOI
170. 孔锐，陈林根，夏少军，李鹏蕾，戈延林（2021）. 基于最小熵产率的碘化氢分解膜反应器最优构型. 《工程热物理学报》.
171. 李鹏蕾，陈林根，夏少军，孔锐，吴志祥，戈延林（2021）. 基于熔融盐加热的SMR膜反应器热力学优化. 《工程热物理学报》.
172. 尤江，陈林根，冯辉君，谢志辉（2021）. 非均匀矩形产热体对流传热构形设计. 《工程热物理学报》.
173. S. M. Pourkiaei, M. Ahmadi, Mahyar Ghazvini, S. Moosavi, F. Pourfayaz, Ravinder Kumar, Lingen Chen (2021). Status of direct and indirect solar desalination methods: comprehensive review. The European Physical Journal Plus.DOI
174. 蔡存光，赵光超，陈林根，冯辉君，肖伟（2020）. 基于氨水工质的管壳式冷凝器多目标构形优化. 《工程热物理学报》.
175. 江帆，孟凡凯，陈林根，沈佳锋（2020）. 变温热源小型热电冷水机结构设计与性能分析. 《工程热物理学报》.
176. 冯辉君，陈林根，吴志祥，唐威，石俊朝（2020）. 基于(火积)理论的有机工质管壳式冷凝器构形优化. 《化工学报》.
177. Liang Wang, Zhihui Xie, Lingen Chen, Rong Wang, Hui-Jun Feng (2020). Equivalent thermal resistance minimization for a circular disc heat sink with reverting microchannels based on constructal theory and entransy theory. Science China Technological Sciences.DOI
178. Hui-Jun Feng, Jiang You, Lingen Chen, Yan-Lin Ge, Shaojun Xia (2020). Constructal design of a non-uniform heat generating disc based on entropy generation minimization. The European Physical Journal Plus.DOI
179. Lingen Chen, Ai-Bo Yang, Hui-Jun Feng, Yan-Lin Ge, Shaojun Xia (2020). Constructal design progress for eight types of heat sinks. Science China Technological Sciences.DOI
180. R. Aghayari, H. Maddah, S. M. Pourkiaei, M. Ahmadi, Lingen Chen, Mahyar Ghazvini (2020). Theoretical and experimental studies of heat transfer in a double-pipe heat exchanger equipped with twisted tape and nanofluid. The European Physical Journal Plus.DOI
181. 石瀚楠，谢志辉，孙丰瑞，陈林根，冯辉君（2019）. 树状脉管圆盘热沉的传热分析与构形设计. 《工程热物理学报》.
182. 夏少军，陈林根，孙丰瑞（2019）. 广义辐射传热有热漏换热过程■耗散最小化. 《工程热物理学报》.
183. 刘晓威，陈林根，丁泽民，吴锋（2019）. 不可逆谐振子卡诺制冷机有限■时间经济最优性能. 《工程热物理学报》.
184. 尤江，陈林根，冯辉君（2019）. 非均匀产热“盘-点”导热构形设计. 《工程热物理学报》.
185. Hui-Jun Feng, Lingen Chen, Zhihui Xie (2019). Constructal entransy dissipation rate minimization for X-shaped vascular networks. Science China Technological Sciences.DOI
186. Lingen Chen, Liang Wang, Zhihui Xie, Fengrui Sun (2019). Constructal studies on hexagonal microchannel heat sinks based on multi-physics field coupling calculations. Scientia Sinica Technologica.DOI
187. Zhixiang Wu, Lingen Chen, Yan-Lin Ge, F. Sun (2018). Optimization of the power, efficiency and ecological function for an air-standard irreversible Dual-Miller cycle. Frontiers in Energy.DOI
188. Ze-Min Ding, Lingen Chen, Yan-Lin Ge, Zhihui Xie (2018). Optimal performance regions of an irreversible energy selective electron heat engine with double resonances. Science China Technological Sciences.DOI
189. Wei-Jian Chen, Hui-Jun Feng, Lingen Chen, Shaojun Xia (2018). Optimal Performance Characteristics of Subcritical Simple Irreversible Organic Rankine Cycle. Journal of Thermal Science.DOI
190. Huijun Feng, Lingen Chen, Zhixiang Wu, Zhuojun Xie (2018). Constructal design of a shell-and-tube heat exchanger for organic fluid evaporation process. International Journal of Heat and Mass Transfer.DOI
191. Lingen Chen, Dan Xia, Huijun Feng, Shaojun Xia (2018). Ecological Optimization for an Endoreversible Chemical Pump With Three Mass Reservoirs.DOI
192. Huijun Feng, Kang Ma, Lingen Chen, Shaojun Xia (2018). Ecological Performance of a Generalized Radiative System Light-Driven Engine (LDE) With [A] ⇌ [B] Reacting System Improved by Controlling Piston Motion.DOI
193. Huijun Feng, Lingen Chen, Shaojun Xia (2018). Constructal design for disc-shaped heat exchanger with maximum thermal efficiency. International Journal of Heat and Mass Transfer.DOI
194. Lingen Chen, Huijun Feng, Zhihui Xie, Fengrui Sun (2018). Progress of constructal theory in China over the past decade. International Journal of Heat and Mass Transfer.DOI
195. Lingen Chen, Xiaohui Wu, Xiaowei Liu (2018). Local stability of a generalized irreversible heat engine with linear phenomenological heat transfer law working in an ecological regime. Thermal Science and Engineering Progress.DOI
196. Lingen Chen, Yanlin Ge, Xiaoyong Qin, Zhihui Xie (2018). Exergy-based ecological optimization for a four-temperature-level absorption heat pump with heat resistance, heat leakage and internal irreversibility. International Journal of Heat and Mass Transfer.DOI
197. Aibo Yang, Lingen Chen, Zhihui Xie, Huijun Feng, Fengrui Sun (2018). Constructal operation cost minimization for in-line cylindrical pin-fin heat sinks. International Journal of Heat and Mass Transfer.DOI
198. Yanlin Ge, Wenhua Wang, Lingen Chen, Fankai Meng (2018). Exergoeconomic performance analysis and optimisation of an irreversible-closed intercooled regenerated gas turbine cycle. International Journal of Ambient Energy.DOI
199. Jiang You, Huijun Feng, Lingen Chen, Zhihui Xie (2018). Constructal Optimization for Cooling a Non-Uniform Heat Generating Radial-Pattern Disc by Conduction. Entropy.DOI
200. Zemin Ding, Lingen Chen, Xiaowei Liu (2018). Thermodynamic optimization for irreversible thermal Brownian motors, energy selective electron engines and thermionic devices. International Journal of Ambient Energy.DOI
201. Yuanli Feng, Lingen Chen, Fankai Meng, Fengrui Sun (2018). Influences of external heat transfer and Thomson effect on the performance of TEG-TEC combined thermoelectric device. Science China Technological Sciences.DOI
202. Shuhuan Wei, Lingen Chen, Zhihui Xie (2018). Constructal heat conduction optimization: Progresses with entransy dissipation rate minimization. Thermal Science and Engineering Progress.DOI
203. Hannan Shi, Zhihui Xie, Lingen Chen, Fengrui Sun (2018). Constructal optimization for line-to-line vascular based on entropy generation minimization principle. International Journal of Heat and Mass Transfer.DOI
204. Wei Hong Qi, Wenhua Wang, Lingen Chen (2018). Power and efficiency performance analyses for a closed endoreversible binary Brayton cycle with two isothermal processes. Thermal Science and Engineering Progress.DOI
205. Lei Zhang, Lingen Chen, Shaojun Xia, Chao Wang, Fengrui Sun (2018). Entropy Generation Minimization for Reverse Water Gas Shift (RWGS) Reactors. Entropy.DOI
206. Yuehong Bi, Lingen Chen, Zemin Ding, Fengrui Sun (2018). Performance Optimization of Irreversible Air Heat Pumps Considering Size Effect. Journal of Thermal Science.DOI
207. Lingen Chen, Chao Wang, Shaojun Xia, Fengrui Sun (2018). Thermodynamic analyses and optimizations of extraction process of CO2 from acidic seawater by using hollow fiber membrane contactor. International Journal of Heat and Mass Transfer.DOI
208. Zhixiang Wu, Lingen Chen, Yanlin Ge, Fengrui Sun (2018). Thermodynamic optimization for an air-standard irreversible Dual-Miller cycle with linearly variable specific heat ratio of working fluid. International Journal of Heat and Mass Transfer.DOI
209. Yong Yin, Lingen Chen, Feng Wu (2018). Performance of quantum Stirling heat engine with numerous copies of extreme relativistic particles confined in 1D potential well. Physica A Statistical Mechanics and its Applications.DOI
210. Zhixiang Wu, Lingen Chen, Huijun Feng (2018). Thermodynamic Optimization for an Endoreversible Dual-Miller Cycle (DMC) with Finite Speed of Piston. Entropy.DOI
211. Fuli Zhu, Lingen Chen, Wenhua Wang (2018). Thermodynamic Analysis of an Irreversible Maisotsenko Reciprocating Brayton Cycle. Entropy.DOI
212. Susu Qiu, Zhihui Xie, Lingen Chen, Aibo Yang, Junle Zhou (2018). Entropy generation analysis for convective heat transfer of nanofluids in tree-shaped network flowing channels. Thermal Science and Engineering Progress.DOI
213. Yanlin Ge, Lingen Chen, Xiaoyong Qin (2018). Effect of specific heat variations on irreversible Otto cycle performance. International Journal of Heat and Mass Transfer.DOI
214. Lingen Chen, Lei Zhang, Shaojun Xia, Fengrui Sun (2018). Entropy generation minimization for CO2 hydrogenation to light olefins. Energy.DOI
215. Lingen Chen, Qinghua Xiao, Huijun Feng (2018). Constructal Optimizations for Heat and Mass Transfers Based on the Entransy Dissipation Extremum Principle, Performed at the Naval University of Engineering: A Review. Entropy.DOI
216. Yuanli Feng, Lingen Chen, Fankai Meng, Fengrui Sun (2018). Influences of the Thomson Effect on the Performance of a Thermoelectric Generator-Driven Thermoelectric Heat Pump Combined Device. Entropy.DOI
217. Huijun Feng, Lingen Chen, Shaojun Xia (2018). CONSTRUCTAL OPTIMIZATION FOR DISC-SHAPED HEAT EXCHANGER BASED ON THERMAL EFFICIENCY MAXIMIZATION. Proceeding of Second Thermal and Fluids Engineering Conference.DOI
218. Lingen Chen, Xiaohui Wu, Shaojun Xia, Huijun Feng (2018). LOCAL STABILITY ANALYSIS FOR OPTIMAL PERFORMANCE OF AN ENDOREVERSIBLE CARNOT REFRIGERATOR WITH LINEAR PHENOMENOLOGICAL HEAT TRANSFER LAW. Proceeding of Second Thermal and Fluids Engineering Conference.DOI
219. Shaojun Xia, Lingen Chen, Huijun Feng (2018). ENTROPY GENERATION MINIMIZATION FOR ONE-WAY ISOTHERMAL MASS TRANSFER PROCESSES WITH MASS LEAKAGE. Proceeding of Second Thermal and Fluids Engineering Conference.DOI
220. 殷勇，吴锋，陈林根（2017）. 量子斯特林制冷循环性能研究. 《工程热物理学报》.
221. 王超，陈林根，夏少军，宋汉江，孙丰瑞（2017）. 中空纤维膜接触器脱出CO2过程熵产率最小化. 《工程热物理学报》.
222. 张磊，陈林根，夏少军，王超，孙丰瑞（2017）. CO2加氢合成低碳烯烃反应热力学分析. 《工程热物理学报》.
223. Shaojun Xia, Lingen Chen (2017). Capital dissipation minimization for a class of complex irreversible resource exchange processes. The European Physical Journal Plus.DOI
224. Zhixiang Wu, Lingen Chen, Yan-Lin Ge, F. Sun (2017). Power, efficiency, ecological function and ecological coefficient of performance of an irreversible Dual-Miller cycle (DMC) with nonlinear variable specific heat ratio of working fluid. The European Physical Journal Plus.DOI
225. Yong Yin, Lingen Chen, Feng Wu (2017). Optimal power and efficiency of quantum Stirling heat engines. The European Physical Journal Plus.DOI
226. Yan-Lin Ge, Lingen Chen, Xiao-Yong Qin, Zhihui Xie (2017). Exergy-based ecological performance of an irreversible Otto cycle with temperature-linear-relation variable specific heat of working fluid. The European Physical Journal Plus.DOI
227. Huijun Feng, Lingen Chen, Zhihui Xie (2017). Constructal optimizations for “+” shaped high conductivity channels based on entransy dissipation rate minimization. International Journal of Heat and Mass Transfer.DOI
228. Yuanli Feng, Lingen Chen, Fankai Meng, Fengrui Sun (2017). Thermodynamic Analysis of TEG-TEC Device Including Influence of Thomson Effect. Journal of Non-Equilibrium Thermodynamics.DOI
229. Xun Shen, Lingen Chen, Shaojun Xia, Zhihui Xie, Xiaoyong Qin (2017). Burdening proportion and new energy-saving technologies analysis and optimization for iron and steel production system. Journal of Cleaner Production.DOI
230. Bo Lun Yang, Lingen Chen, Huijun Feng, Zemin Ding (2017). Modelling, Analyses and Optimization for Exergy Performance of an Irreversible Intercooled Regenerated Brayton CHP Plant: Part 2 — Performance Optimization.DOI
231. Lingen Chen, Bo Lun Yang, Huijun Feng, Zemin Ding (2017). Modelling, Analyses and Optimization for Exergy Performance of an Irreversible Intercooled Regenerated Brayton CHP Plant: Part 1 — Thermodynamic Modelling and Parametric Analyses.DOI
232. Shaojun Xia, Lingen Chen (2017). Minimizing Power-Consumption of a Generalized Convective Law Multistage Heat Pump System via Hamilton-Jacobi-Bellman Equations and Dynamic Programming.DOI
233. Yong Yin, Lingen Chen, Feng Wu (2017). Performance analysis and optimization for generalized quantum Stirling refrigeration cycle with working substance of a particle confined in a general 1D potential. Physica E Low-dimensional Systems and Nanostructures.DOI
234. Jiang You, Huijun Feng, Lingen Chen, Zhihui Xie (2017). Heat conduction constructal optimization for nonuniform heat generating area based on triangular element. International Journal of Heat and Mass Transfer.DOI
235. Fankai Meng, Lingen Chen, Zhihui Xie, Yanlin Ge (2017). Thermoelectric generator with air-cooling heat recovery device from wastewater. Thermal Science and Engineering Progress.DOI
236. Jiang You, Lingen Chen, Zhixiang Wu, Fengrui Sun (2017). Thermodynamic performance of Dual-Miller cycle (DMC) with polytropic processes based on power output, thermal efficiency and ecological function. Science China Technological Sciences.DOI
237. Lingen Chen, Shaojun Xia, Fengrui Sun (2017). Entropy generation minimization for isothermal crystallization processes with a generalized mass diffusion law. International Journal of Heat and Mass Transfer.DOI
238. Huijun Feng, Lingen Chen, Zhihui Xie (2017). Multi-disciplinary, multi-objective and multi-scale constructal optimizations for heat and mass transfer processes performed in Naval University of Engineering, a review. International Journal of Heat and Mass Transfer.DOI
239. Xun Shen, Lingen Chen, Shaojun Xia, Xiaoyong Qin, Zhihui Xie (2017). Iron ores matching analysis and optimization for iron-making system by taking energy consumption, CO2 emission or cost minimization as the objective. Science China Technological Sciences.DOI
240. Changxin Liu, Zhihui Xie, Fengrui Sun, Lingen Chen (2017). Exergy analysis and optimization of coking process. Energy.DOI
241. Lingen Chen, Chang Liu, Huijun Feng (2017). Work output and thermal efficiency optimization for an irreversible Meletis-Georgiou cycle with heat transfer loss and internal irreversibility. Applied Thermal Engineering.DOI
242. Xiaowei Liu, Lingen Chen, Zemin Ding (2017). Fundamental performance optimization of an irreversible quantum spin 1/2 Brayton refrigerator. Thermal Science and Engineering Progress.DOI
243. Lingen Chen, Zemin Ding, Junle Zhou, Wenhua Wang, Fengrui Sun (2017). Thermodynamic performance optimization for an irreversible vacuum thermionic generator. The European Physical Journal Plus.DOI
244. Xiaoyong Qin, Lingen Chen, Shaojun Xia (2017). Ecological performance of four-temperature-level absorption heat transformer with heat resistance, heat leakage and internal irreversibility. International Journal of Heat and Mass Transfer.DOI
245. Fankai Meng, Lingen Chen, Yuanli Feng, Bing Xiong (2017). Thermoelectric generator for industrial gas phase waste heat recovery. Energy.DOI
246. Huijun Feng, Lingen Chen, Xiong Liu, Zhihui Xie (2017). Constructal design for an iron and steel production process based on the objectives of steel yield and useful energy. International Journal of Heat and Mass Transfer.DOI
247. Huijun Feng, Lingen Chen, Zhihui Xie, Fengrui Sun (2017). Constructal design for helm-shaped fin with internal heat sources. International Journal of Heat and Mass Transfer.DOI
248. Lingen Chen, Kang Ma, Yanlin Ge, Fengrui Sun (2017). MINIMUM ENTROPY GENERATION PATH FOR LIGHT-DRIVEN ENGINE WITH [A]-[B] SYSTEM AND HEAT TRANSFER LAW. Environmental Engineering and Management Journal.DOI
249. Huijun Feng, Lingen Chen, Zhihui Xie, Yanlin Ge (2017). MAXIMUM EXERGY OUTPUT RATE FOR AN ENDOREVERSIBLE CLOSED BRAYTON CYCLE COMBINED COOLING, HEATING AND POWER PLANT. Proceeding of Second Thermal and Fluids Engineering Conference.DOI
250. Yanlin Ge, Lingen Chen, Xiaoyong Qin, Zhihui Xie (2017). ECOLOGICAL OPTIMIZATION OF AN IRREVERSIBLE OTTO CYCLE WITH VARIABLE SPECIFIC HEATS OF WORKING FLUID. Proceeding of Second Thermal and Fluids Engineering Conference.DOI
251. Zhihui Xie, Shaojun Xia, Lingen Chen, Yanlin Ge (2017). AN INVERSE OPTIMIZATION FOR MINIMIZING ENTRANSY DISSIPATION DURING HEAT TRANSFER PROCESSES. Proceeding of Second Thermal and Fluids Engineering Conference.DOI
252. Xiaoyong Qin, Lingen Chen, Yanlin Ge, Zhihui Xie (2017). EXERGY-BASED ECOLOGICAL CRITERION AND OPTIMIZATION OF AN IRREVERSIBLE ABSORPTION HEAT PUMP. Proceeding of Second Thermal and Fluids Engineering Conference.DOI
253. Fankai Meng, Lingen Chen, Zhihui Xie, Yanlin Ge (2017). AIR-COOLING THERMOELECTRIC POWER GENERATION FROM WASTEWATER. Proceeding of Second Thermal and Fluids Engineering Conference.DOI
254. Zemin Ding, Lingen Chen, Yanlin Ge, Zhihui Xie (2017). EXPLORING THE OPTIMAL PERFORMANCE OF AN IRREVERSIBLE DOUBLE RESONANCE ENERGY SELECTIVE ELECTRON HEAT ENGINE. Proceeding of Second Thermal and Fluids Engineering Conference.DOI
255. Shaojun Xia, Lingen Chen, Yanlin Ge, Zhihui Xie (2017). OPTIMIZATION FOR MINIMIZING POWER-CONSUMPTION OF A REAL MULTISTAGE HEAT PUMP SYSTEM UNDER A GENERALIZED HEAT TRANSFER LAW VIA HAMILTON-JACOBI-BELLMAN THEORY. Proceeding of Second Thermal and Fluids Engineering Conference.DOI
256. Lingen Chen, Shaojun Xia, Yanlin Ge, Zhihui Xie (2017). DYNAMIC PROGRAMMING FOR POWER-OPTIMIZATION OF MULTISTAGE ISOTHERMAL IRREVERSIBLE CHEMICAL ENGINES WITH DIFFUSIVE MASS TRANSFER LAW. Proceeding of Second Thermal and Fluids Engineering Conference.DOI
257. 丁泽民，陈林根，王文华，孙丰瑞（2016）. 闭式中冷回热燃气轮机循环经济性能优化. 《热力透平》.
258. Aibo Yang, Lingen Chen, Zhihui Xie, Huijun Feng, Fengrui Sun (2016). Thermal performance analysis of non-uniform height rectangular fin based on constructal theory and entransy theory. Science China Technological Sciences.DOI
259. Lingen Chen, Xun Shen, Shaojun Xia, Fengrui Sun (2016). Thermodynamic analyses for recovering residual heat of high-temperature basic oxygen gas (BOG) by the methane reforming with carbon dioxide reaction. Energy.DOI
260. Shaojun Xia, Lingen Chen, Fengrui Sun (2016). Maximum cycle work output optimization for generalized radiative law Otto cycle engines. The European Physical Journal Plus.DOI
261. Lingen Chen, Huijun Feng, Zhihui Xie (2016). Generalized Thermodynamic Optimization for Iron and Steel Production Processes: Theoretical Exploration and Application Cases. Entropy.DOI
262. Shaojun Xia, Lingen Chen, Zhihui Xie, Fengrui Sun (2016). Entransy dissipation minimization for generalized heat exchange processes. Science China Technological Sciences.DOI
263. Lingen Chen, Aibo Yang, Zhihui Xie, Fengrui Sun (2016). Constructal entropy generation rate minimization for cylindrical pin-fin heat sinks. International Journal of Thermal Sciences.DOI
264. Chao Wang, Lingen Chen, Yanlin Ge, Fengrui Sun (2016). Comparison of air-standard rectangular cycles with different specific heat models. Applied Thermal Engineering.DOI
265. Huijun Feng, Lingen Chen, Zhihui Xie, Fengrui Sun (2016). Constructal entransy dissipation rate minimization of a rectangular body with nonuniform heat generation. Science China Technological Sciences.DOI
266. Huijun Feng, Lingen Chen, Xiong Liu, Zhihui Xie, Fengrui Sun (2016). Generalized constructal optimization of strip laminar cooling process based on entransy theory. Science China Technological Sciences.DOI
267. Shaojun Xia, Lingen Chen, Fengrui Sun (2016). Optimization of equimolar reverse constant-temperature mass-diffusion process for minimum entransy dissipation. Science China Technological Sciences.DOI
268. Huijun Feng, Lingen Chen, Zhihui Xie, Fengrui Sun (2016). Constructal design for a rectangular body with nonuniform heat generation. The European Physical Journal Plus.DOI
269. Aibo Yang, Lingen Chen, Zhihui Xie, Huijun Feng, Fengrui Sun (2016). Constructal heat transfer rate maximization for cylindrical pin-fin heat sinks. Applied Thermal Engineering.DOI
270. Junle Zhou, Lingen Chen, Zemin Ding, Fengrui Sun (2016). Analysis and optimization with ecological objective function of irreversible single resonance energy selective electron heat engines. Energy.DOI
271. Xiong Liu, Lingen Chen, Huijun Feng, Xiaoyong Qin, Fengrui Sun (2016). Constructal design of a blast furnace iron-making process based on multi-objective optimization. Energy.DOI
272. Changxin Liu, Zhihui Xie, Fengrui Sun, Lingen Chen (2016). Optimization for sintering proportioning based on energy value. Applied Thermal Engineering.DOI
273. Junle Zhou, Lingen Chen, Zemin Ding, Fengrui Sun (2016). Exploring the optimal performances of irreversible single resonance energy selective electron refrigerators. The European Physical Journal Plus.DOI
274. Youhong Yu, Zemin Ding, Lingen Chen, Wenhua Wang, Fengrui Sun (2016). Power and efficiency optimization for an energy selective electron heat engine with double-resonance energy filter. Energy.DOI
275. Xiong Liu, Huijun Feng, Lingen Chen, Xiaoyong Qin, Fengrui Sun (2016). Hot metal yield optimization of a blast furnace based on constructal theory. Energy.DOI
276. Yanlin Ge, Lingen Chen, Fengrui Sun (2016). Progress in Finite Time Thermodynamic Studies for Internal Combustion Engine Cycles. Entropy.DOI
277. Lingen Chen, Dongliang Ni, Zelong Zhang, Fengrui Sun (2016). Exergetic performance optimization for new combined intercooled regenerative Brayton and inverse Brayton cycles. Applied Thermal Engineering.DOI
278. Huijun Feng, Lingen Chen, Zhihui Xie, Fengrui Sun (2016). Constructal designs for insulation layers of steel rolling reheating furnace wall with convective and radiative boundary conditions. Applied Thermal Engineering.DOI
279. Xiong Liu, Lingen Chen, Huijun Feng, Fengrui Sun (2016). Constructal design for blast furnace wall based on the entransy theory. Applied Thermal Engineering.DOI
280. Shuwen Gong, Lingen Chen, Zhihui Xie, Huijun Feng, Fengrui Sun (2016). Constructal optimization of cylindrical heat sources with forced convection based on entransy dissipation rate minimization. Science China Technological Sciences.DOI
281. Chao Wang, Lingen Chen, Shaojun Xia, Fengrui Sun (2016). Maximum production rate optimization for sulphuric acid decomposition process in tubular plug-flow reactor. Energy.DOI
282. Lingen Chen, Fankai Meng, Fengrui Sun (2016). Thermodynamic analyses and optimization for thermoelectric devices: The state of the arts. Science China Technological Sciences.DOI
283. Chao Wang, Lingen Chen, Shaojun Xia, Fengrui Sun (2016). Optimal Concentration Configuration of Consecutive Chemical Reaction A ⇔ B ⇔ C for Minimum Entropy Generation. Journal of Non-Equilibrium Thermodynamics.DOI
284. 孟凡凯，陈林根，谢志辉，孙丰瑞（2015）. 动力锂离子电池热特性数值仿真与分析. 《高等教育学会工程热物理专业委员会第二十一届全国学术会议论文集——传热传质学专辑》.
285. 刘雄，陈林根，冯辉君，孙丰瑞（2015）. 基于(火积)耗散率最小的高炉炉墙构形优化. 《高等教育学会工程热物理专业委员会第二十一届全国学术会议论文集——传热传质学专辑》.
286. 冯辉君，陈林根，谢志辉，孙丰瑞（2015）. 基于(火积)耗散率最小的T-Y形肋片构形优化. 《工程热物理学报》.
287. 夏少军，陈林根，孙丰瑞（2015）. 传热规律和热漏对换热过程熵产生最小化的影响. 《高等教育学会工程热物理专业委员会第二十一届全国学术会议论文集——工程热力学专辑》.
288. 沈勋，陈林根，夏少军，孙丰瑞（2015）. 钢铁流程能耗分析及节能技术的研究进展. 《节能》.
289. 王文华，陈林根，丁泽民，杨博，孙丰瑞（2015）. 恒温热源闭式燃气轮机中冷循环性能优化. 《工程热物理学报》.
290. 王超，陈林根，夏少军，孙丰瑞（2015）. 连续化学反应ABC最小熵产生优化. 《高等教育学会工程热物理专业委员会第二十一届全国学术会议论文集——工程热力学专辑》.
291. 孟凡凯，陈林根，谢志辉，孙丰瑞（2015）. 如何评价余热回收技术？ 《中国冶金报》.
292. 孟凡凯，陈林根，谢志辉，孙丰瑞（2015）. 钢铁工业余热回收技术的评价指标体系. 《中国冶金》.
293. 范旭东，谢志辉，孙丰瑞，陈林根（2015）. 线-线脉管微通道热沉的对流传热特性. 《高等教育学会工程热物理专业委员会第二十一届全国学术会议论文集——传热传质学专辑》.
294. Lingen Chen, Huijun Feng, Zhihui Xie, Fengrui Sun (2015). Constructal optimization for leaf-like body based on maximization of heat transfer rate. International Communications in Heat and Mass Transfer.DOI
295. Huijun Feng, Lingen Chen, Xiong Liu, Zhihui Xie, Fengrui Sun (2015). Constructal optimization of a sinter cooling process based on exergy output maximization. Applied Thermal Engineering.DOI
296. Zemin Ding, Lingen Chen, Yanlin Ge, Fengrui Sun (2015). Performance optimization of total momentum filtering double-resonance energy selective electron heat pump. Physica A Statistical Mechanics and its Applications.DOI
297. Lei Zhang, Lingen Chen, Fengrui Sun (2015). Power optimization of chemically driven heat engine based on first and second order reaction kinetic theory and probability theory. Physica A Statistical Mechanics and its Applications.DOI
298. Xudong Fan, Zhihui Xie, Fengrui Sun, Lingen Chen (2015). Convective heat transfer characteristics of line-to-line vascular microchannel heat sink with temperature-dependent fluid properties. Applied Thermal Engineering.DOI
299. Xiong Liu, Lingen Chen, Xiaoyong Qin, Fengrui Sun (2015). Exergy loss minimization for a blast furnace with comparative analyses for energy flows and exergy flows. Energy.DOI
300. Huijun Feng, Lingen Chen, Zhihui Xie, Fengrui Sun (2015). Constructal entropy generation rate minimization for asymmetric vascular networks in a disc-shaped body. International Journal of Heat and Mass Transfer.DOI
301. Shuwen Gong, Lingen Chen, Huijun Feng, Zhihui Xie, Fengrui Sun (2015). Constructal optimization of cylindrical heat sources surrounded with a fin based on minimization of hot spot temperature. International Communications in Heat and Mass Transfer.DOI
302. Lingen Chen, Huijun Feng, Zhihui Xie, Fengrui Sun (2015). Thermal efficiency maximization for H- and X-shaped heat exchangers based on constructal theory. Applied Thermal Engineering.DOI
303. Huijun Feng, Lingen Chen, Zhihui Xie, Fengrui Sun (2015). Constructal design for “+” shaped high conductivity pathways over a square body. International Journal of Heat and Mass Transfer.DOI
304. Wenjun Wu, Lingen Chen, Zhihui Xie, Fengrui Sun (2015). Improvement of constructal tree-like network for “volume-point” heat conduction with variable cross-section conducting path and without the premise of optimal last-order construct. International Communications in Heat and Mass Transfer.DOI
305. Zelong Zhang, Lingen Chen, Bo Lun Yang, Yanlin Ge, Fengrui Sun (2015). Thermodynamic analysis and optimization of an air Brayton cycle for recovering waste heat of blast furnace slag. Applied Thermal Engineering.DOI
306. Huijun Feng, Lingen Chen, Zhihui Xie, Fengrui Sun (2015). Constructal design for gas-turbine blade based on minimization of maximum thermal resistance. Applied Thermal Engineering.DOI
307. Lingen Chen, Huijun Feng, Zhihui Xie, Fengrui Sun (2015). “Volume-point” mass transfer constructal optimization based on flow resistance minimization with cylindrical element. International Journal of Heat and Mass Transfer.DOI
308. Huijun Feng, Lingen Chen, Zhihui Xie, Fengrui Sun (2015). Constructal design for X-shaped hot water network over a rectangular area. Applied Thermal Engineering.DOI
309. Huijun Feng, Lingen Chen, Zhihui Xie, Fengrui Sun (2015). Constructal entransy dissipation rate minimization for solid–gas reactors with heat and mass transfer in a disc-shaped body. International Journal of Heat and Mass Transfer.DOI
310. Xiaoyong Qin, Lingen Chen, Yanlin Ge, Fengrui Sun (2015). Thermodynamic modeling and performance analysis of the variable-temperature heat reservoir absorption heat pump cycle. Physica A Statistical Mechanics and its Applications.DOI
311. Huijun Feng, Lingen Chen, Zhihui Xie, Fengrui Sun (2015). Constructal entransy dissipation rate minimization for helm-shaped fin with inner heat sources. Science China Technological Sciences.DOI
312. Lingen Chen, Bo Lun Yang, Xun Shen, Zhihui Xie, Fengrui Sun (2015). Thermodynamic optimization opportunities for the recovery and utilization of residual energy and heat in China's iron and steel industry: A case study. Applied Thermal Engineering.DOI
313. Huijun Feng, Lingen Chen, Zhihui Xie, Fengrui Sun (2015). Constructal optimization for a single tubular solid oxide fuel cell. Journal of Power Sources.DOI
314. Zemin Ding, Lingen Chen, Wenhua Wang, Yanlin Ge, Fengrui Sun (2015). Exploring the operation of a microscopic energy selective electron engine. Physica A Statistical Mechanics and its Applications.DOI
315. Huijun Feng, Lingen Chen, Zhihui Xie, Fengrui Sun (2015). “Disc-point” heat and mass transfer constructal optimization for solid–gas reactors based on entropy generation minimization. Energy.DOI
316. Changxin Liu, Zhihui Xie, Fengrui Sun, Lingen Chen (2015). System dynamics analysis on characteristics of iron-flow in sintering process. Applied Thermal Engineering.DOI
317. Huijun Feng, Lingen Chen, Zhihui Xie, Fengrui Sun (2015). Constructal entropy generation rate minimization for X-shaped vascular networks. International Journal of Thermal Sciences.DOI
318. Huijun Feng, Lingen Chen, Zhihui Xie, Fengrui Sun (2015). Constructal entransy dissipation rate minimization for triangular heat trees at micro and nanoscales. International Journal of Heat and Mass Transfer.DOI
319. Huijun Feng, Lingen Chen, Zhihui Xie, Fengrui Sun (2015). Constructal design for a disc-shaped area based on minimum flow time of a flow system. International Journal of Heat and Mass Transfer.DOI
320. Lingen Chen, Xiaohui Wu, Qinghua Xiao, Yanlin Ge, Fengrui Sun (2015). LOCAL STABILITY OF A GENERALIZED IRREVERSIBLE CARNOT ENGINE WORKING AT THE MAXIMUM ECOLOGICAL FUNCTION. Environmental Engineering and Management Journal.DOI
321. Lingen Chen, Zemin Ding, Yanlin Ge, Fengrui Sun (2015). PERFORMANCE ANALYSIS FOR AN IRREVERSIBLE COMBINED THERMIONIC-THERMOELECTRIC GENERATOR WITH FINITE RATE HEAT TRANSFER. Environmental Engineering and Management Journal.DOI
322. 杨博，陈林根，戈延林，孙丰瑞（2014）. 开式回热燃气轮机热电冷联产装置性能优化. 《热力透平》.
323. 王文华，陈林根，戈延林，孙丰瑞（2014）. 开式燃气轮机中冷回热再热循环功率和效率优化. 《热力透平》.
324. 王文华，陈林根，丁泽民，杨博，孙丰瑞（2014）. 钢铁厂高炉煤气燃气轮机循环热力分析. 《热力透平》.
325. 孟凡凯，陈林根，杨博，孙丰瑞（2014）. 烧结烟气余热热电发电模型与数值模拟. 《工程热物理学报》.
326. 丁泽民，陈林根，戈延林，刘晓威，孙丰瑞（2014）. 不可逆双谐振通道电子热机生态学性能优化. 《工程热物理学报》.
327. 冯辉君，陈林根，谢志辉，孙丰瑞（2014）. 微、纳米尺度下基于构形理论的树状圆盘整体导热性能优化. 《工程热物理学报》.
328. 刘晓威，陈林根，戈延林，吴锋，孙丰瑞（2014）. 不可逆量子自旋布雷顿制冷机最优性能. 《工程热物理学报》.
329. 陈林根，杨博，谢志辉，王文华，孙丰瑞（2014）. 转炉煤气驱动开式燃气轮机CCHP装置FTT建模与优化. 《中国冶金》.
330. 刘雄，陈林根，冯辉君，孙丰瑞（2014）. 基于(火积)耗散率最小的高炉冷却壁构形优化. 《高等学校工程热物理第二十届全国学术会议论文集——传热传质学专辑》.
331. 孟凡凯，陈林根，孙丰瑞（2014）. 一种空冷式冲渣水余热热电发电装置及性能分析. 《高等学校工程热物理第二十届全国学术会议论文集——工程热力学专辑》.
332. 秦晓勇，陈林根，孙丰瑞（2014）. 基于火用分析的不可逆吸收式热泵循环生态学目标及其性能. 《高等学校工程热物理第二十届全国学术会议论文集——工程热力学专辑》.
333. 王超，陈林根，戈延林，孙丰瑞（2014）. 考虑工质非线性变比热时内可逆矩形循环性能分析. 《高等学校工程热物理第二十届全国学术会议论文集——工程热力学专辑》.
334. 夏少军，陈林根，孙丰瑞（2014）. 等摩尔双向等温传质过程积耗散最小化. 《高等学校工程热物理第二十届全国学术会议论文集——工程热力学专辑》.
335. Lingen Chen (2014). Progress in optimization of mass transfer processes based on mass entransy dissipation extremum principle. Science China Technological Sciences.DOI
336. Bo Yang, Lingen Chen, Yan-Lin Ge, F. Sun (2014). Exergy Performance Optimization of an Irreversible Closed Intercooled Regenerative Brayton Cogeneration Plant. The Arabian journal for science and engineering.DOI
337. Bing Xiong, Lingen Chen, Fankai Meng, Fengrui Sun (2014). Modeling and performance analysis of a two-stage thermoelectric energy harvesting system from blast furnace slag water waste heat. Energy.DOI
338. Xiaohui Wu, Lingen Chen, Yanlin Ge, Fengrui Sun (2014). Local stability of a non-endoreversible Carnot refrigerator working at the maximum ecological function. Applied Mathematical Modelling.DOI
339. Shaojun Xia, Lingen Chen, Fengrui Sun (2014). Endoreversible modeling and optimization of multistage isothermal chemical engines under linear mass transfer law via Hamilton–Jacobi–Bellman theory. International Journal of Low-Carbon Technologies.DOI
340. Huijun Feng, Lingen Chen, Zhihui Xie, Zemin Ding, Fengrui Sun (2014). Generalized constructal optimization for the secondary cooling process of slab continuous casting based on entransy theory. Science China Technological Sciences.DOI
341. Aibo Yang, Lingen Chen, Shaojun Xia, Fengrui Sun (2014). The optimal configuration of reciprocating engine based on maximum entransy loss. Chinese Science Bulletin.DOI
342. Zhihui Xie, Lingen Chen, Fengrui Sun (2014). Constructal optimization for an insulating wall combining heat flow, strength and volume. International Communications in Heat and Mass Transfer.DOI
343. Huijun Feng, Lingen Chen, Zhihui Xie, Fengrui Sun (2014). Constructal entransy optimizations for insulation layer of steel rolling reheating furnace wall with convective and radiative boundary conditions. Chinese Science Bulletin.DOI
344. Fankai Meng, Lingen Chen, Fengrui Sun, Bo Lun Yang (2014). Thermoelectric power generation driven by blast furnace slag flushing water. Energy.DOI
345. Huijun Feng, Lingen Chen, Zhihui Xie, Zemin Ding, Fengrui Sun (2014). Generalized constructal optimization for solidification heat transfer process of slab continuous casting based on heat loss rate. Energy.DOI
346. Huijun Feng, Lingen Chen, Zhihui Xie, Fengrui Sun (2014). Constructal entransy dissipation rate minimization for variable cross-section insulation layer of the steel rolling reheating furnace wall. International Communications in Heat and Mass Transfer.DOI
347. Bo Lun Yang, Lingen Chen, Yanlin Ge, Fengrui Sun (2014). Exergy performance analyses of an irreversible two-stage intercooled regenerative reheated closed Brayton CHP plant. International Journal of Exergy.DOI
348. 刘晓威，陈林根，戈延林，吴锋，孙丰瑞（2013）. 谐振子工质不可逆量子布雷顿热机最优性能. 《高等学校工程热物理第十届全国学术会议》.
349. 陈林根，杨博，谢志辉，王文华，孙丰瑞（2013）. 转炉余能余热驱动开式燃气轮机CCHP装置FTT建模与优化. 《高等学校工程热物理第十届全国学术会议》.
350. 王俊华，陈林根，孙丰瑞（2013）. 高炉余能余热驱动内可逆中冷回热Brayton热电联产循环经济性能分析. 《燃气轮机技术》.
351. 秦晓勇，刘雄，陈林根，孙丰瑞（2013）. 以利用系数为目标的高炉性能优化. 《高等学校工程热物理第十届全国学术会议》.
352. 张泽龙，陈林根，戈延林，孙丰瑞（2013）. 焦炉煤气驱动回热式燃气轮机装置热力学分析. 《钢铁研究》.
353. 张泽龙，陈林根，孙丰瑞（2013）. 回热式布雷顿-两平行逆布雷顿联合循环第一定律分析与优化. 《燃气轮机技术》.
354. 孟凡凯，陈林根，孙丰瑞，杨博（2013）. 高炉冲渣水余热热电发电模型与数值模拟. 《高等学校工程热物理第十届全国学术会议》.
355. 吴晓辉，陈林根，戈延林，孙丰瑞（2013）. 内可逆化学机最大生态学函数时的局域稳定性分析. 《高等学校工程热物理第十九届全国学术会议论文集》.
356. 杨博，陈林根，孙丰瑞（2013）. 高炉余能余热驱动不可逆中冷回热燃气轮机热电联产装置的经济性能研究. 《节能》.
357. 陈林根，孟凡凯，孙丰瑞，杨博（2013）. 钢铁工业余热回收新技术——热电发电. 《高等学校工程热物理第十届全国学术会议》.
358. 夏少军，陈林根，戈延林，孙丰瑞（2013）. 存在热漏的换热过程熵产生最小化. 《工程热物理学报》.
359. 冯辉君，陈林根，谢志辉，孙丰瑞（2013）. 积耗散率最小的圆柱形构造体传质构形优化. 《工程热物理学报》.
360. 张万里，陈林根，孙丰瑞（2013）. 开式双轴燃气轮机循环的热力学优化. 《热力透平》.
361. 吴晓辉，陈林根，戈延林，孙丰瑞（2013）. 内可逆化学机最大功率时的局域稳定性分析. 《海军工程大学学报》.
362. 陈林根（2013）. 基于质量积耗散极值原理的传质过程优化. 《海军工程大学学报》.
363. 冯辉君，陈林根，谢志辉，孙丰瑞（2013）. 对流和辐射边界条件下轧钢加热炉壁绝热层(火积)构形优化. 《高等学校工程热物理第十九届全国学术会议论文集》.
364. 张泽龙，陈林根，戈延林，孙丰瑞（2013）. 焦炉煤气驱动的回热式燃气轮机装置热力学分析. 《高等学校工程热物理第十届全国学术会议》.
365. 杨爱波，陈林根，夏少军，孙丰瑞（2013）. 基于(火积)损失最大的往复式热机最优构型. 《高等学校工程热物理第十届全国学术会议》.
366. 杨博，陈林根，王文华，戈延林，孙丰瑞（2013）. 高炉余能余热驱动内可逆回热布雷顿循环热电冷联产装置的最优性能. 《燃气轮机技术》.
367. Hui-Jun Feng, Lingen Chen, Zhihui Xie, Hui-Jun Feng (2013). Constructal entransy dissipation rate minimization the problem of constracting "disc-point" cooling channels.DOI
368. Fankai Meng, Lingen Chen, Fengrui Sun (2013). Effects of thermocouples’ physical size on the performance of the TEG–TEH system. International Journal of Low-Carbon Technologies.DOI
369. Zemin Ding, Lingen Chen, Fengrui Sun (2013). Heating load and COP optimization of a double resonance energy selective electron (ESE) heat pump. International Journal of Low-Carbon Technologies.DOI
370. Lingen Chen, Huijun Feng, Zhihui Xie, Fengrui Sun (2013). Constructal optimization for “disc-point” heat conduction at micro and nanoscales. International Journal of Heat and Mass Transfer.DOI
371. Lingen Chen, Qinghua Xiao, Zhihui Xie, Fengrui Sun (2013). Constructal entransy dissipation rate minimization for tree-shaped assembly of fins. International Journal of Heat and Mass Transfer.DOI
372. Huijun Feng, Lingen Chen, Zhihui Xie, Fengrui Sun (2013). Constructal Optimization for Tree-Shaped Fluid Networks in a Disc-Shaped Area Subjected to the Surface Area Constraint. Arabian Journal for Science and Engineering.DOI
373. Lingen Chen, Huijun Feng, Zhihui Xie, Fengrui Sun (2013). “Disc-point” mass transfer Constructal optimizations with Darcy and Hagen–Poiseuille flows in porous media. Applied Mathematical Modelling.DOI
374. Junhua Wang, Lingen Chen, Yanlin Ge, Fengrui Sun (2013). Power and power density analyzes of an endoreversible modified variable-temperature reservoir Brayton cycle with isothermal heat addition. International Journal of Low-Carbon Technologies.DOI
375. Zhihui Xie, Lingen Chen, Fengrui Sun (2013). Constructal entropy generation rate minimization of line-to-line vascular networks with convective heat transfer. International Journal of Thermal Sciences.DOI
376. Wenhua Wang, Lingen Chen, Fengrui Sun (2013). Thermodynamic optimization of a triple-shaft open intercooled, recuperated gas turbine cycle. Part 2: power and efficiency optimization. International Journal of Low-Carbon Technologies.DOI
377. Lingen Chen, Wenhua Wang, Fengrui Sun (2013). Thermodynamic optimization of a triple-shaft open intercooled-recuperated gas turbine cycle. Part 1: description and modeling. International Journal of Low-Carbon Technologies.DOI
378. Huijun Feng, Lingen Chen, Zhihui Xie, Fengrui Sun (2013). Constructal optimization of a disc-shaped body with cooling channels for specified power pumping. International Journal of Low-Carbon Technologies.DOI
379. Junhua Wang, Lingen Chen, Yanlin Ge, Fengrui Sun (2013). Ecological performance analysis of an endoreversible modified Brayton cycle. International Journal of Sustainable Energy.DOI
380. Zelong Zhang, Lingen Chen, Fengrui Sun (2013). Performance optimisation for two classes of combined regenerative Brayton and inverse Brayton cycles. International Journal of Sustainable Energy.DOI
381. Lingen Chen (2013). Optimization for mass transfer processes based on mass entransy dissipation extremum principle. Journal of Naval University of Engineering.
382. Lingen Chen (2013). Progress in Thermodynamic Studies for Semiconductor Thermoelectric Devices. Journal of Mechanical Engineering.DOI
383. 冯辉君，陈林根，肖庆华，孙丰瑞（2012）. 微、纳米尺度下三角形构造体的整体最优构形设计. 《化工学报》.
384. 陈于涛，曾凡明，陈林根（2012）. 舰船柴油机并车推进装置增益调度自适应转速控制策略研究. 《内燃机工程》.
385. 王文华，陈林根，孙丰瑞（2012）. 具有空气冷却的中冷回热循环三轴燃气轮机热力学建模和性能优化. 《热科学与技术》.
386. 孟凡凯，陈林根，戈延林，孙丰瑞（2012）. 单级多单元热电制冷机制冷率优化. 《工程热物理学报》.
387. 肖庆华，陈林根，谢志辉，冯辉君，孙丰瑞（2012）. Y形肋片火积耗散率最小构形优化. 《工程热物理学报》.
388. 杨博，陈林根，孙丰瑞（2012）. 两级中冷回热再热布雷顿热电联产装置的性能. 《工程热物理学报》.
389. 王文华，陈林根，戈延林，孙丰瑞（2012）. 燃气轮机循环有限时间热力学研究新进展. 《热力透平》.
390. 张万里，陈林根，韩文玉，吴智文（2012）. 正反向布雷顿循环有限时间热力学分析与优化研究进展. 《燃气轮机技术》.
391. Lingen Chen, K. Ma, Yan-Lin Ge, F. Sun (2012). Optimal Configuration of a Bimolecular, Light-Driven Engine for Maximum Ecological Performance. The Arabian journal for science and engineering.DOI
392. Lingen Chen (2012). Energy analysis and optimization of combined regenerative Brayton and two parallel inverse Brayton cycles with regeneration after inverse cycles.
393. Huijun Feng, Lingen Chen, Zhihui Xie, Fengrui Sun (2012). Constructal optimization for H-shaped multi-scale heat exchanger based on entransy theory. Science China Technological Sciences.DOI
394. Xiaoyong Qin, Lingen Chen, Yanlin Ge, Fengrui Sun (2012). Finite Time Thermodynamic Studies on Absorption Thermodynamic Cycles: A State-of-the-Art Review. Arabian Journal for Science and Engineering.DOI
395. Yanlin Ge, Lingen Chen, Fengrui Sun (2012). Ecological Optimization of an Irreversible Otto Cycle. Arabian Journal for Science and Engineering.DOI
396. Huijun Feng, Lingen Chen, Zhihui Xie, Fengrui Sun (2012). “Volume-Point” Mass Transfer Constructal Optimization Based on Triangular Element. Arabian Journal for Science and Engineering.DOI
397. Lingen Chen (2012). Progress in entransy theory and its applications. Chinese Science Bulletin.DOI
398. Bo Lun Yang, Lingen Chen, Yanlin Ge, Fengrui Sun (2012). Finite-time exergoeconomic performance of a real intercooled regenerated gas turbine cogeneration plant. Part 2: heat conductance distribution and pressure ratio optimization. International Journal of Low-Carbon Technologies.DOI
399. Lingen Chen, Wenjun Wu, Fengrui Sun (2012). Constructal re-optimization of heat conduction with the triangular elemental area. International Journal of Low-Carbon Technologies.DOI
400. Huijun Feng, Lingen Chen, Zhihui Xie, Fengrui Sun (2012). Thermal insulation constructal optimization for steel rolling reheating furnace wall based on entransy dissipation extremum principle. Science China Technological Sciences.DOI
401. Lingen Chen, Qinghua Xiao, Zhihui Xie, Fengrui Sun (2012). T-shaped assembly of fins with constructal entransy dissipation rate minimization. International Communications in Heat and Mass Transfer.DOI
402. Lingen Chen, Wanli Zhang, Fengrui Sun (2012). Thermodynamic optimization of an open cycle of an externally fired micro gas turbine. Part 2: Performance optimization. International Journal of Low-Carbon Technologies.DOI
403. Lingen Chen, Kang Ma, Yanlin Ge, Fengrui Sun (2012). Optimisation for forced cool-down processes with minimum cooling fluid mass. International Journal of Sustainable Energy.DOI
404. Lingen Chen, Kang Ma, Fengrui Sun (2012). Optimal Paths for a Light-Driven Engine with [A]=[B] Reacting System and Generalized Radiative Heat Transfer Law. International Journal of Chemical Reactor Engineering.DOI
405. Zhijie Li, Sujun Dong, Adrian Bejan, Lingen Chen (2012). WITHDRAWN: Design of constructal configurations for fluid flow and heat transfer. Applied Thermal Engineering.DOI
406. Lingen Chen, Bo Yang, Y. Ge, Feng Rui Sun (2012). The finite-time exergoeconomic performance of a real, intercooled, regenerated gas-turbine cogeneration plant. Part 1: model description and parametric analyses. International Journal of Low-Carbon Technologies.DOI
407. Lingen Chen, Fankai Meng, Fu‐Hua Sun (2012). Internal and external simultaneous optimization of an irreversible thermoelectric generator for maximum power output. International Journal of Low-Carbon Technologies.DOI
408. Lingen Chen, Fankai Meng, Yanlin Ge, Fengrui Sun (2012). Optimum variables selection of thermoelectric generator-driven thermoelectric refrigerator at different source temperature. International Journal of Ambient Energy.DOI
409. Xiaowei Liu, Lingen Chen, Yanlin Ge, Feng Wu, Fengrui Sun (2012). Fundamental optimal relation of a generalised irreversible quantum Carnot heat pump with harmonic oscillators. International Journal of Ambient Energy.DOI
410. Bo Lun Yang, Lingen Chen, Fengrui Sun, Chih Wu (2012). Exergetic performance optimization of an endoreversible intercooled regenerated Brayton cogeneration plant. Part 2: Exergy output rate and exergy efficiency optimization. International Journal of Ambient Energy.DOI
411. Zemin Ding, Lingen Chen, Fengrui Sun (2012). Performance Analysis and Optimization of a Single-Barrier Solid-State Thermionic Refrigerator With External Heat Transfer. Heat Transfer Engineering.DOI
412. Lingen Chen, Chang Xin Liu, Fengrui Sun (2012). Performance of irreversible Meletis–Georgiou vane rotary engine cycle with variable specific heats of working fluid. International Journal of Sustainable Energy.DOI
413. Lingen Chen (2012). Progress in study on constructal theory and its applications. Science China Technological Sciences.DOI
414. Huijun Feng, Lingen Chen, Fengrui Sun (2012). “Volume-point” heat conduction constructal optimization based on entransy dissipation rate minimization with three-dimensional cylindrical element and rectangular and triangular elements on microscale and nanoscale. Science China Technological Sciences.DOI
415. Lingen Chen, Zelong Zhang, Fengrui Sun (2012). Thermodynamic Modeling for Open Combined Regenerative Brayton and Inverse Brayton Cycles with Regeneration before the Inverse Cycle. Entropy.DOI
416. Lingen Chen (2012). Study on Gain Scheduling Self-Adaptive Control Strategy for Marine CODAD Propulsion Plant. Neiranji gongcheng.
417. 王俊华，陈林根，孙丰瑞（2011）. 再热Brayton循环效率特性分析. 《热能动力工程》.
418. 马康，陈林根，孙丰瑞（2011）. 辐射传热定律下外燃机最大输出功优化. 《热能动力工程》.
419. 吴晓辉，陈林根，孙丰瑞（2011）. 内可逆热泵在生态学函数最大时局域稳定性. 《工程热物理学报》.
420. 杨博，陈林根，孙丰瑞（2011）. 中冷回热布雷顿热电联产装置的性能优化. 《工程热物理学报》.
421. 杨博，陈林根，孙丰瑞（2011）. 恒温热源不可逆中冷回热布雷顿热电联产装置的火用经济性能优化. 《热能动力工程》.
422. 杨博，张佐东，陈林根（2011）. 中冷回热布雷顿热电联产装置的火用性能分析. 《燃气轮机技术》.
423. 王文华，陈林根，孙丰瑞（2011）. 具有空气冷却的简单循环燃气轮机热力学建模和性能优化:(I)建模. 《热力透平》.
424. Huijun Feng, Lingen Chen, Fengrui Sun (2011). Constructal entransy dissipation rate minimization for leaf-like fins. Science China Technological Sciences.DOI
425. Dan Xia, Lingen Chen, Fengrui Sun (2011). Unified Description of Isothermal Endoreversible Chemical Cycles with Linear Mass Transfer Law. International Journal of Chemical Reactor Engineering.DOI
426. Chang Liu, Lingen Chen, Fengrui Sun (2011). Influence of variable specific heats of working fluid on performance of an endoreversible Meletis–Georgiou cycle. International Journal of Ambient Energy.DOI
427. Zemin Ding, Lingen Chen, Fengrui Sun (2011). Modeling and performance analysis of energy selective electron (ESE) engine with heat leakage and transmission probability. Science China Physics Mechanics and Astronomy.DOI
428. Shaojun Xia, Lingen Chen, Fengrui Sun (2011). Engine performance improved by controlling piston motion: Linear phenomenological law system Diesel cycle. International Journal of Thermal Sciences.DOI
429. Lingen Chen, Bo Lun Yang, Fengrui Sun, Chih Wu (2011). Exergetic performance optimisation of an endoreversible intercooled regenerated Brayton cogeneration plant. Part 1: thermodynamic model and parametric analysis. International Journal of Ambient Energy.DOI
430. Qinghua Xiao, Lingen Chen, Fengrui Sun (2011). Constructal entransy dissipation rate minimization for a heat generating volume cooled by forced convection. Chinese Science Bulletin.DOI
431. Yuehong Bi, Guozhen Xie, Lingen Chen, Fengrui Sun (2011). Heating load density optimization of an irreversible simple Brayton cycle heat pump coupled to counter-flow heat exchangers. Applied Mathematical Modelling.DOI
432. Qinghua Xiao, Lingen Chen, Fengrui Sun (2011). Constructal entransy dissipation rate minimization for heat conduction based on a tapered element. Chinese Science Bulletin.DOI
433. Lingen Chen, Huijun Feng, Fengrui Sun (2011). Exergoeconomic performance optimization for a combined cooling, heating and power generation plant with an endoreversible closed Brayton cycle. Mathematical and Computer Modelling.DOI
434. Lingen Chen, Zemin Ding, Fengrui Sun (2011). Model of a total momentum filtered energy selective electron heat pump affected by heat leakage and its performance characteristics. Energy.DOI
435. Lingen Chen, TU You-ming, Fengrui Sun (2011). Exergetic efficiency optimization for real regenerated air refrigerators. Applied Thermal Engineering.DOI
436. Lingen Chen, Yanlin Ge, Fengrui Sun, Chih Wu (2011). Finite-time thermodynamic modelling and analysis for an irreversible Miller cycle. International Journal of Ambient Energy.DOI
437. Kang Ma, Lingen Chen, Fengrui Sun, Chih Wu (2011). Finite-time exergoeconomic performance analysis and optimisation for generalised irreversible combined heat pump cycles. International Journal of Ambient Energy.DOI
438. Huijun Feng, Lingen Chen, Fengrui Sun, Chih Wu (2011). Heating load and COP optimisations for a universal steady flow endoreversible heat pump model. International Journal of Ambient Energy.DOI
439. Zemin Ding, Lingen Chen, Fengrui Sun (2011). Performance optimization of a total momentum filtered energy selective electron (ESE) heat engine with double resonances. Mathematical and Computer Modelling.DOI
440. Lingen Chen, Zhihui Xie, Fengrui Sun (2011). Multiobjective constructal optimization of an insulating wall combining heat flow, strength and weight. International Journal of Thermal Sciences.DOI
441. Lingen Chen, Shaojun Xia, Fengrui Sun (2011). Optimizing piston velocity profile for maximum work output from a generalized radiative law Diesel engine. Mathematical and Computer Modelling.DOI
442. Fankai Meng, Lingen Chen, Fengrui Sun (2011). A numerical model and comparative investigation of a thermoelectric generator with multi-irreversibilities. Energy.DOI
443. Shuhuan Wei, Lingen Chen, Fengrui Sun (2011). Constructal entransy dissipation minimization of round tube heat exchanger cross-section. International Journal of Thermal Sciences.DOI
444. Huijun Feng, Lingen Chen, Fengrui Sun (2011). Exergoeconomic optimal performance of an irreversible closed Brayton cycle combined cooling, heating and power plant. Applied Mathematical Modelling.DOI
445. Shaojun Xia, Lingen Chen, Fengrui Sun (2011). Hamilton-Jacobi-Bellman equations and dynamic programming for power-optimization of a multistage heat engine system with generalized convective heat transfer law. Chinese Science Bulletin.DOI
446. Jun Li, Lingen Chen, Fengrui Sun, Chih Wu (2011). Ecological performance of an endoreversible Carnot refrigerator with complex heat transfer law. International Journal of Ambient Energy.DOI
447. Lingen Chen, Jun Li, Fengrui Sun, Chih Wu (2011). Exergoeconomic performance of an endoreversible Carnot refrigerator with complex heat transfer law. International Journal of Ambient Energy.DOI
448. Qinghua Xiao, Lingen Chen, Fengrui Sun (2011). Constructal optimization for “disc-to-point” heat conduction without the premise of optimized last-order construct. International Journal of Thermal Sciences.DOI
449. Xiaowei Liu, Lingen Chen, Feng Wu, Fengrui Sun (2011). Fundamental optimal relation of an irreversible quantum Carnot heat pump with spin-1/2 systems. Mathematical and Computer Modelling.DOI
450. Qinghua Xiao, Lingen Chen, Fengrui Sun (2011). Constructal design for a steam generator based on entransy dissipation extremum principle. Science China Technological Sciences.DOI
451. Shaojun Xia, Lingen Chen, Fengrui Sun (2011). Entransy dissipation minimization for a class of one-way isothermal mass transfer processes. Science China Technological Sciences.DOI
452. Zhihui Xie, Lingen Chen, Fengrui Sun (2011). Comparative study on constructal optimizations of T-shaped fin based on entransy dissipation rate minimization and maximum thermal resistance minimization. Science China Technological Sciences.DOI
453. Lingen Chen, Shaojun Xia, Fengrui Sun (2011). Maximum Power Output of Multistage Continuous and Discrete Isothermal Endoreversible Chemical Engine System with Linear Mass Transfer Law. International Journal of Chemical Reactor Engineering.DOI
454. Qinghua Xiao, Lingen Chen, Fengrui Sun (2011). Constructal entransy dissipation rate minimization for “disc-to-point” heat conduction. Chinese Science Bulletin.DOI
455. Wenhua Wang, Lingen Chen, Fengrui Sun (2011). Ecological optimisation of an irreversible-closed ICR gas turbine cycle. International Journal of Exergy.DOI
456. Yanlin Ge, Lingen Chen, Fengrui Sun (2011). Optimal paths of piston motion of irreversible diesel cycle for minimum entropy generation. Thermal Science.DOI
457. Lingen Chen, Zemin Ding, Fengrui Sun (2011). Optimum performance analysis of Feynman's engine as cold and hot ratchets. Journal of Non-Equilibrium Thermodynamics.DOI
458. 马康，陈林根，孙丰瑞（2010）. 强迫冷却过程冷却流体质量最小化新析. 《工程热物理学报》.
459. 张万里，陈林根，孙丰瑞（2010）. 开式微型燃气轮机外燃循环的功率和效率优化. 《热力透平》.
460. 舒礼伟，陈林根，孙丰瑞（2010）. 不可逆反渗透分离过程的性能分析. 《热能动力工程》.
461. Qinghua Xiao, Lingen Chen, Fengrui Sun (2010). Constructal entransy dissipation rate minimization for umbrella-shaped assembly of cylindrical fins. Science China Technological Sciences.DOI
462. Lingen Chen, Xuxian Kan, Fengrui Sun, Feng Wu, Fangzhong Guo (2010). Ecological performance optimization of a thermoacoustic heat engine. Redalyc (Universidad Autónoma del Estado de México).
463. Shaojun Xia, Lingen Chen, Fengrui Sun (2010). Finite-time exergy with a finite heat reservoir and generalized radiative heat transfer law. Redalyc (Universidad Autónoma del Estado de México).
464. Lingen Chen, Huijun Feng, Fengrui Sun (2010). Heating load, COP, exergy loss rate, exergy output rate and ecological optimizations for a class of generalized irreversible universal heat pump cycles. Redalyc (Universidad Autónoma del Estado de México).
465. Wei Kou, Sun Feng-rui, Yang Li, Lingen Chen (2010). Application of Improved BCC Algorithm and RBFNN in Identification of Defect Parameters. International Conference on Genetic and Evolutionary Computing.DOI
466. Wei Kou, Fengrui Sun, Yang Li, Lingen Chen (2010). Application of BCC Algorithm and RBFNN in Identification of Defect Parameters.DOI
467. Zhihui Xie, Lingen Chen, Fengrui Sun (2010). Constructal optimization of twice Y-shaped assemblies of fins by taking maximum thermal resistance minimization as objective. Science China Technological Sciences.DOI
468. Zemin Ding, Lingen Chen, Fengrui Sun (2010). Performance characteristic of energy selective electron (ESE) refrigerator with filter heat conduction. Redalyc (Universidad Autónoma del Estado de México).
469. Huijun Feng, Lingen Chen, Fengrui Sun (2010). Optimal ratios of the piston speeds for a finite speed endoreversible Carnot heat engine cycle. Redalyc (Universidad Autónoma del Estado de México).
470. Qinghua Xiao, Lingen Chen, Fengrui Sun (2010). Constructal entransy dissipation rate and flow-resistance minimizations for cooling channels. Science China Technological Sciences.DOI
471. Lingen Chen, Dan Xia, Fengrui Sun (2010). Ecological Optimization of Generalized Irreversible Chemical Engines. International Journal of Chemical Reactor Engineering.DOI
472. Zhihui Xie, Lingen Chen, Fengrui Sun (2010). Geometry optimization of T-shaped cavities according to constructal theory. Mathematical and Computer Modelling.DOI
473. Lingen Chen, Shaojun Xia, Fengrui Sun (2010). Maximum efficiency of an irreversible heat engine with a distributed working fluid and linear phenomenological heat transfer law. Redalyc (Universidad Autónoma del Estado de México).
474. Zemin Ding, Lingen Chen, Fengrui Sun (2010). Power and efficiency performances of a micro thermal Brownian heat engine with and without external forces. Brazilian Journal of Physics.DOI
475. Lingen Chen, Zemin Ding, Fengrui Sun (2010). Performance analysis of a vacuum thermionic refrigerator with external heat transfer. Journal of Applied Physics.DOI
476. Kang Ma, Lingen Chen, Fengrui Sun (2010). Optimal paths for a light-driven engine with a linear phenomenological heat transfer law. Science China Chemistry.DOI
477. Yuehong Bi, Lingen Chen, Fengrui Sun (2010). Exergetic efficiency optimization for an irreversible heat pump working on reversed Brayton cycle. Pramana.DOI
478. Jun Li, Lingen Chen, Fengrui Sun (2010). Fundamental optimal relation of a generalized irreversible Carnot heat pump with complex heat transfer law. Pramana.DOI
479. 陶桂生，陈林根，孙丰瑞（2009）. 实际回热式布雷顿热电联产装置的火用经济性能——Ⅱ.热导率分配与压比优化. 《燃气轮机技术》.
480. 陶桂生，陈林根，孙丰瑞（2009）. 实际回热式布雷顿热电联产装置的经济性能——Ⅰ.循环模型与参数分析. 《燃气轮机技术》.
481. 宋汉江，陈林根，孙丰瑞（2009）. 辐射传热时活塞式气缸中加热气体的最大膨胀功. 《海军工程大学学报》.
482. 刘晓威，陈林根，孙丰瑞（2009）. 线性唯象传热定律下广义不可逆卡诺热机的频率特性. 《热能动力工程》.
483. 丁泽民，陈林根，孙丰瑞（2009）. 线性唯象传热定律下斯特林热机性能极限分析. 《工程热物理学报》.
484. 陶桂生，陈林根，孙丰瑞（2009）. 内可逆回热式燃气轮机热电联产装置的(火用)经济性能优化. 《工程热物理学报》.
485. 孟凡凯，陈林根，孙丰瑞（2009）. 热电发电机驱动热电制冷机联合系统最优性能. 《工程热物理学报》.
486. 陶桂生，陈林根，孙丰瑞（2009）. 不可逆闭式布雷顿热电联产装置经济性能优化. 《热能动力工程》.
487. Zhihui Xie, Lingen Chen, Fengrui Sun (2009). Constructal optimization for geometry of cavity by taking entransy dissipation minimization as objective. Science China Technological Sciences.DOI
488. Xiaowei Liu, Lingen Chen, Feng Wu, Fengrui Sun (2009). Ecological optimization of an irreversible harmonic oscillators Carnot heat engine. Science in China. Series G, Physics, mechanics & astronomy/Science in China. Series G, Physics, Mechanics & Astronomy.DOI
489. Shaojun Xia, Lingen Chen, Fengrui Sun (2009). Maximum power output of a class of irreversible non-regeneration heat engines with a non-uniform working fluid and linear phenomenological heat transfer law. Science in China. Series G, Physics, mechanics & astronomy/Science in China. Series G, Physics, Mechanics & Astronomy.DOI
490. Shaojun Xia, Lingen Chen, Fengrui Sun (2009). Optimization for entransy dissipation minimization in heat exchanger. 《中国科学通报：英文版》.DOI
491. Shaojun Xia, Lingen Chen, Fengrui Sun (2009). Optimal configuration of a finite mass reservoir isothermal chemical engine for maximum work output with linear mass transfer law. Redalyc (Universidad Autónoma del Estado de México).
492. Kang Ma, Lingen Chen, Fengrui Sun (2009). Profit rate performance optimization for a generalized irreversible combined refrigeration cycle. Sadhana.DOI
493. Shuhuan Wei, Lingen Chen, Fengrui Sun (2009). Constructal multidisciplinary optimization of electromagnet based on entransy dissipation minimization. Science China Technological Sciences.DOI
494. Yuehong Bi, Tingwei Guo, Liang Zhang, Lingen Chen, Fengrui Sun (2009). Entropy generation minimization for charging and discharging processes in a gas-hydrate cool storage system. Applied Energy.DOI
495. Lingen Chen, Fankai Meng, Fengrui Sun (2009). Effect of heat transfer on the performance of a thermoelectric heat pump driven by a thermoelectric generator. Redalyc (Universidad Autónoma del Estado de México).
496. Liwei Shu, Lingen Chen, Fengrui Sun (2009). The minimum heat consumption for heat-driven binary separation processes with linear phenomenological heat transfer law. Science China Chemistry.DOI
497. Shaojun Xia, Lingen Chen, Fengrui Sun (2009). Maximum power configuration for multireservoir chemical engines. Journal of Applied Physics.DOI
498. Lingen Chen, Shuhuan Wei, Fengrui Sun (2009). Constructal entransy dissipation minimization of an electromagnet. Journal of Applied Physics.DOI
499. Shaojun Xia, Lingen Chen, Fengrui Sun (2009). The optimal path of piston motion for Otto cycle with linear phenomenological heat transfer law. Science in China. Series G, Physics, mechanics & astronomy/Science in China. Series G, Physics, Mechanics & Astronomy.DOI
500. Jun Li, Lingen Chen, Fengrui Sun (2009). Optimal configuration for a finite high-temperature source heat engine cycle with the complex heat transfer law. Science in China. Series G, Physics, mechanics & astronomy/Science in China. Series G, Physics, Mechanics & Astronomy.DOI
501. Lingen Chen, Shaojun Xia, Fengrui Sun (2009). Optimal paths for minimizing entropy generation during heat transfer processes with a generalized heat transfer law. Journal of Applied Physics.DOI
502. Lingen Chen, Hanjiang Song, Fengrui Sun, Shengbing Wang (2009). Optimal configuration of heat engines for maximum efficiency with generalized radiative heat transfer law. Redalyc (Universidad Autónoma del Estado de México).
503. Guisheng Tao, Lingen Chen, Fengrui Sun (2009). Exergoeconomic performance optimization for an endoreversible regenerative gas turbine closed-cycle cogeneration plant. Redalyc (Universidad Autónoma del Estado de México).
504. Yuehong Bi, Lingen Chen, Fengrui Sun (2009). Exergy-based ecological optimization for an endoreversible variable-temperature heat reservoir air heat pump cycle. Redalyc (Universidad Autónoma del Estado de México).
505. 孟凡凯，陈林根，孙丰瑞（2008）. 热电发电机驱动热电热泵联合循环热力学分析. 《热能动力工程》.
506. 李俊，陈林根，孙丰瑞（2008）. 线性唯象传热规律下复杂系统的热力学优化. 《热能动力工程》.
507. 张万里，陈林根，孙丰瑞（2008）. 布雷顿-逆布雷顿联合循环最优性能. 《工程热物理学报》.
508. 陈业初，王文华，陈林根，孙丰瑞（2008）. 中冷回热燃气轮机循环换热器热导率最优分配——生态学性能优化. 《燃气轮机技术》.
509. Hanjiang Song, Lingen Chen, Fengrui Sun (2008). Optimal configuration of a class of endoreversible heat engines for maximum efficiency with radiative heat transfer law. Science in China. Series G, Physics, mechanics & astronomy/Science in China. Series G, Physics, Mechanics & Astronomy.DOI
510. Shuhuan Wei, Lingen Chen, Fengrui Sun (2008). “Volume-Point” heat conduction constructal optimization with entransy dissipation minimization objective based on rectangular element. Science China Technological Sciences.DOI
511. 张万里，陈林根，孙丰瑞（2007）. 一类广义不可逆普适热机循环的生态学性能. 《燃气轮机技术》.
512. 王文华，陈林根，孙丰瑞（2007）. 恒温热源不可逆闭式中冷回热燃气轮机循环的生态学优化. 《动力工程学报》.
513. Hanjiang Song, Lingen Chen, Fengrui Sun (2007). Optimal expansion of a heated working fluid for maximum work output with generalized radiative heat transfer law. Journal of Applied Physics.DOI
514. Feng Wu, Lingen Chen, Shuang Ying Wu, Fengrui Sun (2007). Thermodynamic performance of a laser cryocooler. The Journal of Chemical Physics.DOI
515. Lingen Chen (2007). Effects of sea water temperature on the performance of the marine steam jet refrigerator. Ship & Ocean Engineering.
516. 戈延林，陈林根，孙丰瑞（2006）. 工质变比热条件下内燃机循环普适特性. 《工程热物理学报》.
517. 舒礼伟，陈林根，孙丰瑞（2006）. 传热传质过程和设备的有限时间热力学优化. 《热能动力工程》.
518. 倪何，孙丰瑞，陈林根（2006）. 具有热阻、热漏和内不可逆性的联合卡诺热机生态学优化. 《海军工程大学学报》.
519. 倪何，孙丰瑞，陈林根（2006）. 具有热阻和热漏的再热布雷顿循环性能分析. 《燃气轮机技术》.
520. 屠友明，陈林根，孙丰瑞（2006）. 实际回热式布雷顿制冷机的性能优化. 《工程热物理学报》.
521. 周圣兵，陈林根，孙丰瑞（2006）. 基于三角形单元体的构形理论经济学研究. 《热能动力工程》.
522. Hanjiang Song, Lingen Chen, Jun Li, Fengrui Sun, Chih Wu (2006). Optimal configuration of a class of endoreversible heat engines with linear phenomenological heat transfer law [q∝Δ(T−1)]. Journal of Applied Physics.DOI
523. Feng Wu, Lingen Chen, Shuang Ying Wu, Fengrui Sun, Chih Wu (2006). Performance of an irreversible quantum Carnot engine with spin 1∕2. The Journal of Chemical Physics.DOI
524. Feng Wu, Lingen Chen, Fengrui Sun, Chih Wu, Fangzhong Guo (2006). Optimization criteria for an irreversible quantum Brayton engine with an ideal Bose gas. Journal of Applied Physics.DOI
525. 戈延林，陈林根，孙丰瑞（2005）. 工质变比热和传热损失对Diesel循环性能的影响. 《海军工程大学学报》.
526. 李军，陈林根，孙丰瑞（2005）. 两级热电热机的有限时间热力学分析. 《热能动力工程》.
527. 戈延林，陈林根，孙丰瑞（2005）. 工质变比热对不可逆Otto循环性能的影响. 《工程热物理学报》.
528. 王文华，陈林根，孙丰瑞（2005）. 燃气轮机中冷循环功率和功率密度优化比较. 《热科学与技术》.
529. 王俊华，陈林根，孙丰瑞（2005）. 变温热源内可逆中冷回热布雷顿循环功率密度分析. 《燃气轮机技术》.
530. 王文华，陈林根，孙丰瑞（2005）. 内可逆闭式中冷回热布雷顿循环效率优化. 《海军工程大学学报》.
531. 谢志辉，叶齐政，陈林根，李劲（2005）. 净化潜艇舱室空气的新技术探讨. 《舰船科学技术》.
532. Lingen Chen, Jun Li, Fengrui Sun, Chih Wu (2005). Effect of heat transfer on the performance of two-stage semiconductor thermoelectric refrigerators. Journal of Applied Physics.DOI
533. 王文华，陈林根，孙丰瑞（2004）. 恒温热源条件下不可逆闭式中冷回热布雷顿循环的功率优化. 《燃气轮机技术》.
534. 王文华，陈林根，孙丰瑞（2004）. 开式燃气轮机中冷循环热力学优化. 《机械工程学报》.
535. 王文华，陈林根，孙丰瑞（2004）. 恒温热源不可逆闭式中冷回热燃气轮机循环的功率和效率. 《太阳能学报》.
536. 王文华，陈林根，孙丰瑞（2004）. 内可逆闭式中冷回热布雷顿循环功率效率特性. 《海军工程大学学报》.
537. 秦晓勇，陈林根，孙丰瑞（2004）. 内可逆四热源吸收式热泵生态学最优性能. 《热能动力工程》.
538. 秦晓勇，陈林根，孙丰瑞（2004）. 不可逆四热源吸收式热变换器的最优性能. 《工程热物理学报》.
539. 罗俊，陈林根，孙丰瑞（2004）. 给定通流部分形状时多级轴流压气机效率优化. 《燃气轮机技术》.
540. Lingen Chen, Zhu Xiaoqin, Fengrui Sun, Chih Wu (2004). Ecological optimization for generalized irreversible Carnot refrigerators. Journal of Physics D Applied Physics.DOI
541. Lingen Chen, Xiaoyong Qin, Fengrui Sun, Chih Wu (2004). Irreversible absorption heat-pump and its optimal performance. Applied Energy.DOI
542. Yanlin Ge, Lingen Chen, Fengrui Sun, Chih Wu (2004). Thermodynamic simulation of performance of an Otto cycle with heat transfer and variable specific heats of working fluid. International Journal of Thermal Sciences.DOI
543. Yanlin Ge, Lingen Chen, Fengrui Sun, Chih Wu (2004). Reciprocating heat-engine cycles. Applied Energy.DOI
544. Shengbing Zhou, Lingen Chen, Fengrui Sun, Chih Wu (2004). Optimal performance of a generalized irreversible Carnot-engine. Applied Energy.DOI
545. Lingen Chen, Fengrui Sun, Chih Wu (2004). Thermoelectric-generator with linear phenomenological heat-transfer law. Applied Energy.DOI
546. Fengrui Sun, Xiaoyong Qin, Lingen Chen, Chih Wu (2004). Optimization between heating load and entropy-production rate for endoreversible absorption heat-transformers. Applied Energy.DOI
547. Xiaoyong Qin, Lingen Chen, Fengrui Sun, Chih Wu (2004). Thermo-economic optimization of an endoreversible four-heat-reservoir absorption-refrigerator. Applied Energy.DOI
548. Lingen Chen, Fengrui Sun, Chih Wu (2004). Thermo-economics for endoreversible heat-engines. Applied Energy.DOI
549. Lingen Chen, Jun Luo, Fengrui Sun, Chih Wu (2004). Optimized efficiency axial-flow compressor. Applied Energy.DOI
550. Mengquan Tan, Lingen Chen, Jin Jia-shan, Fengrui Sun, Chih Jung Wu (2004). Bond-graph-based fault-diagnosis for a marine condensate–booster–feedwater system. Applied Energy.DOI
551. Xiaoyong Qin, Lingen Chen, Fengrui Sun, Chih Wu (2004). Frequency-dependent performance of an endoreversible Carnot engine with a linear phenomenological heat-transfer law. Applied Energy.DOI
552. Wenhua Wang, Lingen Chen, Fengrui Sun, Chih Wu (2004). Power optimization of an irreversible closed intercooled regenerated brayton cycle coupled to variable-temperature heat reservoirs. Applied Thermal Engineering.DOI
553. Chang Han-bao, Yusheng Zhang, Lingen Chen (2004). An applied thermodynamic method for correction of TDC in the indicator diagram and its experimental confirmation. Applied Thermal Engineering.DOI
554. Wenhua Wang, Lingen Chen, Fengrui Sun, Chih Wu (2004). Power optimization of an endoreversible closed intercooled regenerated Brayton cycle. International Journal of Thermal Sciences.DOI
555. Tong Zheng, Lingen Chen, Fengrui Sun, Chih Wu (2004). The influence of heat resistance and heat leak on the performance of a four-heat-reservoir absorption refrigerator with heat transfer law of Q∝Δ(T−1). International Journal of Thermal Sciences.DOI
556. Lingen Chen, Tong Zheng, Fengrui Sun, Chih Wu (2004). Optimal Cooling Load and COP Relationship of a Four-Heat-Reservoir Endoreversible Absorption Refrigeration Cycle. Entropy.DOI
557. Xiaoyong Qin, Lingen Chen, Fengrui Sun, Chih Wu (2004). Optimal Performance of an Endoreversible Four-Heat-Reservoir Absorption Heat-Transformer. Open Systems & Information Dynamics.DOI
558. Youhong Yu, Lingen Chen, Fengrui Sun, Chih Wu (2004). Matlab/Simulink-based simulation for digital-control system of marine three-shaft gas-turbine. Applied Energy.DOI
559. Lingen Chen, Fengrui Sun, Chih Wu (2004). Optimum design of a subsonic axial-flow compressor stage. Applied Energy.DOI
560. Liwei Shu, Lingen Chen, Jin Jia-shan, Jun Yu, Fengrui Sun, Chih Wu (2004). Functional reliability simulation for a power-station's steam-turbine. Applied Energy.DOI
561. Lingen Chen, Ye Li, Fengrui Sun, Chih Wu (2004). Power optimization of open-cycle regenerator gas-turbine power-plants. Applied Energy.DOI
562. Lingen Chen, Fengrui Sun, Chih Wu (2004). Maximum-profit performance for generalized irreversible Carnot-engines. Applied Energy.DOI
563. Lingen Chen, Fengrui Sun, Chih Wu (2004). Optimal performance of an irreversible dual-cycle. Applied Energy.DOI
564. Chunli Fan, Fengrui Sun, Yang Li, Lingen Chen, Wei Qu, Tongze Ma (2004). Experimental Investigation of Flat Miniature Heat Pipes with Three Kinds of Micro Grooves. Enhanced heat transfer/Journal of enhanced heat transfer.DOI
565. 陈林根，郑军林，孙丰瑞（2003）. 核能闭式循环氦气轮机动力装置性能优化. 《中国造船》.
566. 李军，陈林根，孙丰瑞（2003）. 线性唯象传热规律下热机内可逆热经济学研究. 《海军工程大学学报》.
567. 王文华，陈林根，孙丰瑞（2003）. 闭式内可逆中冷回热布雷顿循环的功率优化. 《热能动力工程》.
568. 王文华，陈林根，孙丰瑞（2003）. 摩擦对双压内燃机循环性能的影响. 《内燃机工程》.
569. 王文华，陈林根，孙丰瑞（2003）. 实际闭式中冷回热布雷顿循环新析. 《工程热物理学报》.
570. Lingen Chen, Jianping Zhou, Fengrui Sun, Chih Wu (2003). Ecological optimization for generalized irreversible Carnot engines. Applied Energy.DOI
571. Shengbing Zhou, Lingen Chen, Fengrui Sun, Chih Wu (2003). Theoretical optimization of a regenerated air refrigerator. Journal of Physics D Applied Physics.DOI
572. Xiaoyong Qin, Lingen Chen, Fengrui Sun, Chih Wu (2003). Optimization for a steam turbine stage efficiency using a genetic algorithm. Applied Thermal Engineering.DOI
573. Jun Luo, Lingen Chen, Fengrui Sun, Chih Wu (2003). Optimum allocation of heat transfer surface area for cooling load and COP optimization of a thermoelectric refrigerator. Energy Conversion and Management.DOI
574. Chang Han-bao, Yusheng Zhang, Lingen Chen (2003). Gray forecast of Diesel engine performance based on wear. Applied Thermal Engineering.DOI
575. Wenhua Wang, Lingen Chen, Fengrui Sun, Chih Wu (2003). Performance analysis for an irreversible variable temperature heat reservoir closed intercooled regenerated Brayton cycle. Energy Conversion and Management.DOI
576. Xiaoyong Qin, Lingen Chen, Fengrui Sun, Chih Wu (2003). The universal power and efficiency characteristics for irreversible reciprocating heat engine cycles. European Journal of Physics.DOI
577. Lingen Chen, Junlin Zheng, Fengrui Sun, Chih Wu (2003). Power, power density and efficiency optimization for a closed cycle helium turbine nuclear power plant. Energy Conversion and Management.DOI
578. Tong Zheng, Lingen Chen, Fengrui Sun, Chih Wu (2003). Performance optimization of an irreversible four-heat-reservoir absorption refrigerator. Applied Energy.DOI
579. Feng Wu, Chih Wu, Fangzhong Guo, Qing Li, Lingen Chen (2003). Optimization of a Thermoacoustic Engine with a Complex Heat Transfer Exponent. Entropy.DOI
580. Tong Zheng, Lingen Chen, Fengrui Sun, Chih Wu (2003). RETRACTED: Effect of Heat Leak and Finite Thermal Capacity on the Optimal Configuration of a Two-Heat-Reservoir Heat Engine for Another Linear Heat Transfer Law. Entropy.DOI
581. Lingen Chen, Yuehong Bi, Fengrui Sun, Chih Wu (2003). Performance Optimization of a Combined Heat Pump Cycle. Open Systems & Information Dynamics.DOI
582. Lingen Chen, Fengrui Sun, Chih Wu (2003). Optimal allocation of heat-exchanger area for refrigeration and air-conditioning plants. Applied Energy.DOI
583. Lingen Chen, Xiaoqin Zhu, Fengrui Sun, Chih Wu (2003). Optimal configuration and performance for a generalized Carnot cycle assuming the heat-transfer law Q∝(ΔT). Applied Energy.DOI
584. Xiaoyong Qin, Lingen Chen, Fengrui Sun, Chih Wu (2003). An absorption heat-transformer and its optimal performance. Applied Energy.DOI
585. Shengbing Zhou, Lingen Chen, Fengrui Sun, Chih Wu (2003). Cooling-load density optimization for a regenerated air refrigerator. Applied Energy.DOI
586. Yuehong Bi, Tingwei Guo, Liang Zhang, Lingen Chen (2003). Solar and ground source heat-pump system. Applied Energy.DOI
587. Lingen Chen, Wenhua Wang, Fengrui Sun, Chih Wu (2003). Closed intercooled regenerator Brayton-cycle with constant-temperature heat-reservoirs. Applied Energy.DOI
588. 郑彤，陈林根，孙丰瑞（2002）. 不可逆Dual循环的功率效率特性. 《内燃机学报》.
589. 郑彤，陈林根，孙丰瑞（2002）. 另一类线性传热时热漏和有限热源对两热源热机最优构型的影响. 《海军工程大学学报》.
590. 王文华，陈林根，孙丰瑞（2002）. 摩擦对空气标准Dual循环性能的影响. 《海军工程大学学报》.
591. 李晔，陈林根，孙丰瑞，张仁兴（2002）. 具有压降不可逆性的回热式燃气轮机循环热力学优化. 《燃气轮机技术》.
592. 周圣兵，陈林根，孙丰瑞（2002）. 导热规律服用q∝（ΔT）n广义不可逆卡诺热机的最优性能. 《热能动力工程》.
593. Shengbing Zhou, Lingen Chen, Fengrui Sun, Chih Wu (2002). Cooling Load Density Optimization of an Irreversible Simple Brayton Refrigerator. Open Systems & Information Dynamics.DOI
594. Lingen Chen, Jianzheng Gong, Fengrui Sun, Chih Wu (2002). Heat transfer effect on the performance of MHD power plant. Energy Conversion and Management.DOI
595. Xiaoqin Zhu, Lingen Chen, Fengrui Sun, Chih Wu (2002). The Optimal Performance of a Carnot Heat Pump under the Condition of Mixed Heat Resistance. Open Systems & Information Dynamics.DOI
596. Zhuming Huang, Feng Wu, Lingen Chen, Chih Wu, Fangzhong Guo (2002). Performance optimization for an irreversible quantum Stirling cooler. Journal of Thermal Science.DOI
597. Lingen Chen, Shengbing Zhou, Fengrui Sun, Chih Wu (2002). Preliminary design optimization of a steam generator. Energy Conversion and Management.DOI
598. Feng Wu, Lingen Chen, Fangzhong Guo, Duanyong Li (2002). Network Modeling for Two-Phase Oscillating Flow by Magnet Control. Open Systems & Information Dynamics.DOI
599. Zeng-Yuan Guo, Sen-Quan Zhou, Zhixin Li, Lingen Chen (2002). Theoretical analysis and experimental confirmation of the uniformity principle of temperature difference field in heat exchanger. International Journal of Heat and Mass Transfer.DOI
600. Feng Wu, Chih Wu, Lingen Chen, Fengrui Sun (2002). Performance characteristics of a magnetic Stirling cooler This article is a U.S. Government work and is in the public domain in the U.S.A. International Journal of Energy Research.DOI
601. Lingen Chen, Shengbing Zhou, Fengrui Sun, Chih Wu (2002). Optimal Configuration and Performance of Heat Engines with Heat Leak and Finite Heat Capacity. Open Systems & Information Dynamics.DOI
602. Yuehong Bi, Lingen Chen, Chih Wu (2002). Ground heat exchanger temperature distribution analysis and experimental verification. Applied Thermal Engineering.DOI
603. Junlin Zheng, Lingen Chen, Fengrui Sun, Chih Wu (2002). Powers and efficiency performance of an endoreversible Braysson cycle. International Journal of Thermal Sciences.DOI
604. Lingen Chen, Jianzheng Gong, Fengrui Sun, Chih Wu (2002). Effect of heat transfer on the performance of thermoelectric generators. International Journal of Thermal Sciences.DOI
605. Wenhua Wang, Lingen Chen, Fengrui Sun, Chih Wu (2002). The effect of friction on the performance of an air standard dual cycle. Exergy An International Journal.DOI
606. Tong Zheng, Lingen Chen, Fengrui Sun, Chih Wu (2002). Power, power density and efficiency optimization of an endoreversible Braysson cycle. Exergy An International Journal.DOI
607. Lingen Chen, Junlin Zheng, Fengrui Sun, Chih Wu (2002). Performance comparison of an endoreversible closed variable temperature heat reservoir Brayton cycle under maximum power density and maximum power conditions. Energy Conversion and Management.DOI
608. Lingen Chen, Junxing Lin, Jun Luo, Fengrui Sun, Chih Wu (2002). Friction effect on the characteristic performance of Diesel engines. International Journal of Energy Research.DOI
609. Lingen Chen, Junlin Zheng, Fengrui Sun, Chih Wu (2002). Performance comparison of an irreversible closed Brayton cycle under maximum power density and maximum power conditions. Exergy An International Journal.DOI
610. Lingen Chen, Ye Li, Fengrui Sun, Chih Wu (2002). Optimal performance of an irreversible absorption refrigerator. Exergy An International Journal.DOI
611. Jun Luo, Lingen Chen, Fengrui Sun, Chih Wu (2002). Optimum Allocation of Heat Exchanger Inventory of Irreversible Air Refrigeration Cycles. Physica Scripta.DOI
612. Shengbing Zhou, Lingen Chen, Fengrui Sun, Chih Wu (2002). Cooling load density characteristics of an endoreversible variable-temperature heat reservoir air refrigerator. International Journal of Energy Research.DOI
613. Feng Wu, Chih Wu, Lingen Chen, Fengrui Sun (2002). Performance characteristics of a magnetic Stirling cooler. International Journal of Energy Research.DOI
614. 陈林根，孙丰瑞（2001）. 有限时间热力学研究的一些进展. 《海军工程大学学报》.
615. 陈林根，郑军林，孙丰瑞，过增元（2001）. 变温热源布雷顿循环的功率密度优化. 《工程热物理学报》.
616. 陈林根，吴晏，孙丰瑞（2001）. 燃气轮机循环有限时间热力学分析:理论和应用. 《燃气轮机技术》.
617. 郑军林，陈林根，孙丰瑞，贾野（2001）. 变温热源内可逆布雷顿循环功率密度优化. 《推进技术》.
618. 陈林根，刘维国（2001）. 船用主汽轮齿轮机组调节控制保安系统故障分析. 《热能动力工程》.
619. 郑军林，陈林根，孙丰瑞，王厚铿（2001）. 变温热源回热式布雷顿循环的功率密度特性. 《推进技术》.
620. 罗俊，陈林根，孙丰瑞，倪宁（2001）. 给定轴向分速时轴流压气机级性能的解析优化. 《燃气轮机技术》.
621. Lingen Chen, Junlin Zheng, Fengrui Sun, Chih Wu (2001). Power Density Analysis for a Regenerated Closed Brayton Cycle. Open Systems & Information Dynamics.DOI
622. Lingen Chen, Junling Zheng, Fengrui Sun, Chih Wu (2001). Power Density Optimization for an Irreversible Regenerated Closed Brayton Cycle. Physica Scripta.DOI
623. Lingen Chen, Junlin Zheng, Fengrui Sun, Chih Wu (2001). Power Density Optimization for an Irreversible Closed Brayton Cycle. Open Systems & Information Dynamics.DOI
624. Feng Wu, Lingen Chen, Chih Wu, Fangzhong Guo (2001). Optimization Zone on the Performance of a Generalized Irreversible Magnetic Stirling Cryocooler. Open Systems & Information Dynamics.DOI
625. Shengbing Zhou, Lingen Chen, Fengrui Sun, Chih Wu (2001). Cooling Load Density Analysis and Optimization for an Endoreversible Air Refrigerator. Open Systems & Information Dynamics.DOI
626. Lingen Chen, Junlin Zheng, Fengrui Sun, Chih Wu (2001). Power density analysis and optimization of a regenerated closed variable-temperature heat reservoir Brayton cycle. Journal of Physics D Applied Physics.DOI
627. Lingen Chen, Shengbing Zhou, Fengrui Sun, Chih Wu (2001). Performance of heat-transfer irreversible regenerated Brayton refrigerators. Journal of Physics D Applied Physics.DOI
628. Lingen Chen, Junlin Zheng, Fengrui Sun, Chih Wu (2001). Optimum distribution of heat exchanger inventory for power density optimization of an endoreversible closed Brayton cycle. Journal of Physics D Applied Physics.DOI
629. Lingen Chen, Chih Wu, Fengrui Sun (2001). Effect of heat transfer law on the finite-time exergoeconomic performance of a Carnot refrigerator. Exergy An International Journal.DOI
630. Junlin Zheng, Fengrui Sun, Lingen Chen, Chih Wu (2001). Exergy analysis for a Braysson cycle. Exergy An International Journal.DOI
631. Xiaoqin Zhu, Lingen Chen, Fengrui Sun, Chih Wu (2001). Optimum Performance of a Generalized Irreversible Carnot Heat Pump with a Generalized Heat Transfer Law. Physica Scripta.DOI
632. 郑军林，陈林根，孙丰瑞（2000）. 恒温热源条件下内不可逆布雷顿循环的功率密度特性. 《燃气轮机技术》.
633. 郑军林，陈林根，张鹏鹰（2000）. 内可逆闭式布雷顿循环的功率密度优化. 《燃气轮机技术》.
634. 陈林根，李伍生（2000）. 主汽轮齿轮机组及主要系统故障分析(I)——准备时的主要故障. 《海军工程大学学报》.
635. 胡家顺，孙丰瑞，陈林根（2000）. T>T0燃料电池的最小熵产率优化. 《电站系统工程》.
636. Feng Wu, Lingen Chen, Fengrui Sun, Chih Wu (2000). Finite-time exergoeconomic performance bound for a quantum Stirling engine. International Journal of Engineering Science.DOI
637. 陈林根，孙丰瑞，倪宁（1999）. 具有热阻、热漏和内不可逆性的联合热机性能. 《热能动力工程》.
638. 陈林根，倪宁，孙丰瑞（1999）. 具有热阻、热漏和内部耗散的联合制冷机性能. 《海军工程大学学报》.
639. 陈林根，沈良文，龚建政，孙丰瑞（1999）. 热电制冷机性能分析与实验验证. 《工程热物理学报》.
640. 陈林根，孙丰瑞（1999）. 热漏、内不可逆性和导热规律对制冷机最优性能的影响. 《工程热物理学报》.
641. Lingen Chen, Ning Ni, Chih Wu, Fengrui Sun (1999). Performance analysis of a closed regenerated Brayton heat pump with internal irreversibilities. International Journal of Energy Research.DOI
642. Lingen Chen, Yuehong Bi, Fengrui Sun, Chih Wu (1999). A generalized model of a combined refrigeration cycle and its performance. International Journal of Thermal Sciences.DOI
643. Junxing Lin, Lingen Chen, Chih Wu, Fengrui Sun (1999). Finite-time thermodynamic performance of a Dual cycle. International Journal of Energy Research.DOI
644. Lingen Chen, Chih Wu, Fengrui Sun, Shui Cao (1999). Maximum profit performance of a three-heat-reservoir heat pump. International Journal of Energy Research.DOI
645. Lingen Chen, Ning Ni, Gang Cheng, Fengrui Sun, Chih Wu (1999). Performance analysis for a real closed regenerated Brayton cycle via methods of finite-time thermodynamics. International Journal of Ambient Energy.DOI
646. Ning Ni, Lingen Chen, Chih Wu, Fengrui Sun (1999). Performance analysis for endoreversible closed regenerated Brayton heat pump cycles. Energy Conversion and Management.DOI
647. Lingen Chen, Fengrui Sun, Chih Wu (1999). Effect of heat transfer law on the performance of a generalized irreversible Carnot engine. Journal of Physics D Applied Physics.DOI
648. Lingen Chen, Yuehong Bi, Chih Wu (1999). The influence of nonlinear flow resistance relations on the power and efficiency from fluid flow. Journal of Physics D Applied Physics.DOI
649. Feng Wu, Lingen Chen, Chih Wu, Fengrui Sun, Qing Li (1999). Optimum performance of an irreversible Stirling cryocooler. International Journal of Ambient Energy.DOI
650. 陈林根，孙丰瑞，郑军林（1998）. 质漏对联合循环化学发动机性能的影响. 《海军工程大学学报》.
651. 陈林根，陈兵，孙丰瑞（1998）. 关于流体流动的最大输出功率及效率. 《工程热物理学报》.
652. 陈林根，倪宁，孙丰瑞（1998）. 恒温热源实际闭式燃气轮机回热循环性能的有限时间热力学分析. 《发电设备》.
653. Feng Wu, Lingen Chen, Fengrui Sun, Chih Wu, Peiqun Hua (1998). Optimum performance parameters for a quantum Carnot heat pump with spin-1/2. Energy Conversion and Management.DOI
654. Lingen Chen, Fengrui Sun, Chih Wu (1998). Performance of chemical engines with a mass leak. Journal of Physics D Applied Physics.DOI
655. Feng Wu, Lingen Chen, Chih Wu, Fengrui Sun (1998). Optimum performance of irreversible stirling engine with imperfect regeneration. Energy Conversion and Management.DOI
656. Lingen Chen, Fengrui Sun, Ning Ni, Chih Wu (1998). Optimal configuration of a class of two-heat-reservoir refrigeration cycles. Energy Conversion and Management.DOI
657. Lingen Chen, Chih Wu, Fengrui Sun, Shui Cao (1998). Heat transfer effects on the net work output and efficiency characteristics for an air-standard Otto cycle. Energy Conversion and Management.DOI
658. Chih Wu, Lingen Chen, Fengrui Sun (1998). Effect ZOF heat transfer law on finite-time exergoeconomic performance of carnot heat pump. Energy Conversion and Management.DOI
659. Chih Wu, Lingen Chen, Fengrui Sun (1998). Optimization of steady flow heat pumps. Energy Conversion and Management.DOI
660. Lingen Chen, Junxing Lin, Fengrui Sun, Chih Wu (1998). Efficiency of an Atkinson engine at maximum power density. Energy Conversion and Management.DOI
661. Lingen Chen, Fengrui Sun, Chih Wu (1998). Optimal expansion of a heated working fluid with phenomenological heat transfer. Energy Conversion and Management.DOI
662. Lingen Chen, Chih Wu, Fengrui Sun (1998). Cooling load versus COP characteristics for an irreversible air refrigeration cycle. Energy Conversion and Management.DOI
663. Lingen Chen, Chih Wu, Fengrui Sun (1998). Influence of internal heat leak on the performance of refrigerators. Energy Conversion and Management.DOI
664. Lingen Chen, Chih Wu, Fengrui Sun (1998). Optimization of specific rate of heat pumping in combined heat pump cycles. Energy Conversion and Management.DOI
665. Chih Wu, Lingen Chen, Fengrui Sun, Shui Cao (1998). Optimal collector temperature for solar-driven heat pumps. Energy Conversion and Management.DOI
666. 吴锋，孙丰瑞，陈林根（1997）. 谐振子系统量子卡诺热泵的最佳特性参数. 《热能动力工程》.
667. 陈林根，林俊兴，孙丰瑞（1997）. 最大功率密度输出时 Atkinson 热机的效率. 《内燃机学报》.
668. 吴锋，孙丰瑞，陈林根，朱永红（1997）. 正反向量子斯特林循环有限时间热力学性能界限和优化准则. 《海军工程大学学报》.
669. 陈林根，林俊兴，孙丰瑞（1997）. 摩擦对空气标准Diesel循环功率效率特性的影响. 《工程热物理学报》.
670. 薛蒙，陈林根，孙丰瑞，郁军（1997）. 热漏、内不可逆性和传热规律对卡诺热泵最优性能的影响. 《工程热物理学报》.
671. 陈林根，孙丰瑞（1997）. 闭式燃气轮机回热循环功率和效率新公式. 《燃气涡轮试验与研究》.
672. 陈林根，倪宁，孙丰瑞（1997）. 热阻和内不可逆性对实际闭式燃气轮机回热循环性能的影响(续). 《电站系统工程》.
673. 吴锋，孙丰瑞，陈林根（1997）. 燃料电池发电厂火用经济最佳效率、功率和运行温度. 《电站系统工程》.
674. 陈林根，倪宁，孙丰瑞（1997）. 布雷顿和卡诺热机循环性能比较(Ⅰ)定常态流恒温热源循环. 《推进技术》.
675. 牛克华，陈林根，倪宁，孙丰瑞（1997）. 具有等熵压缩、膨胀过程的回热式布雷顿热泵循环有限时间热力学性能. 《海军工程大学学报》.
676. Lingen Chen, Fengrui Sun, Chih Wu, Jun Yu (1997). Performance characteristic of isothermal chemical engines. Energy Conversion and Management.DOI
677. Lingen Chen, Fengrui Sun, Chih Wu (1997). Exergeo-economic performance bound and optimisation criteria for heat engines. International Journal of Ambient Energy.DOI
678. Chih Wu, Lingen Chen, Fengrui Sun (1997). Finite-Time Thermodynamic Performance for a Class of Irreversible Heat Pumps. ASME Turbo Asia Conference.DOI
679. Fengrui Sun, Wenzhen Chen, Lingen Chen, Chih Wu (1997). Optimal performance of an endoreversible Carnot heat pump. Energy Conversion and Management.DOI
680. Lingen Chen, Fengrui Sun, Chih Wu (1997). Influence of internal heat leak on the power versus efficiency characteristics of heat engines. Energy Conversion and Management.DOI
681. Lingen Chen, Chih Wu, Fengrui Sun (1997). Heat pump performance with internal heat leak. International Journal of Ambient Energy.DOI
682. Lingen Chen, Fengrui Sun, Chih Wu, Jianzheng Gong (1997). Maximum power of a•combined-cycle isothermal chemical engine. Applied Thermal Engineering.DOI
683. Lingen Chen, Chih Wu, Fengrui Sun (1997). Steady flow combined refrigeration cycle performance with heat leak. Applied Thermal Engineering.DOI
684. Lingen Chen, Fengrui Sun, Chih Wu, Robert L. Kiang (1997). Theoretical analysis of the performance of a regenerative closed Brayton cycle with internal irreversibilities. Energy Conversion and Management.DOI
685. Lingen Chen, Chih Wu, Fengrui Sun (1997). Optimal coefficient of performance and heating load relationship of a three-heat-reservoir endoreversible heat pump. Energy Conversion and Management.DOI
686. Lingen Chen, Fengrui Sun, Chih Wu, Robert L. Kiang (1997). A generalized model of a real refrigerator and its performance. Applied Thermal Engineering.DOI
687. Lingen Chen, Fengrui Sun, Chih Wu (1997). Influence of heat transfer law on the performance of a Carnot engine. Applied Thermal Engineering.DOI
688. Chih Wu, Lingen Chen, Fengrui Sun (1997). Optimization of solar absorption refrigerator. Applied Thermal Engineering.DOI
689. Lingen Chen, Chih Wu, Fengrui Sun (1997). Heat transfer effect on the specific heating load of heat pumps. Applied Thermal Engineering.DOI
690. 林俊兴，陈林根，孙丰瑞（1996）. 传热对空气标准内燃机循环性能的影响. 《电站系统工程》.
691. 孙丰瑞，郭立峰，王子义，陈林根，陈文振（1996）. 核动力蒸汽装置性能分析和优化的三种有限时间热力学方法. 《核动力工程》.
692. Lingen Chen, Fanming Zeng, Fengrui Sun, Chih Wu (1996). Heat-transfer effects on net work and/or power as functions of efficiency for air-standard diesel cycles. Energy.DOI
693. Lingen Chen, Chih Wu, Fengrui Sun (1996). Heat transfer effect on the specific cooling load of refrigerators. Applied Thermal Engineering.DOI
694. Chih Wu, Lingen Chen, Fengrui Sun (1996). Effect of the heat transfer law on the finite-time, exergoeconomic performance of heat engines. Energy.DOI
695. Chih Wu, Lingen Chen, Fengrui Sun (1996). Performance analysis of solar three-heat-reservoir cooling systems. Energy Conversion and Management.DOI
696. Chih Wu, Lingen Chen, Fengrui Sun (1996). Optimisation of steady flow refrigeration cycles. International Journal of Ambient Energy.DOI
697. Chih Wu, Lingen Chen, Fengrui Sun, Wenzhen Chen (1996). General performance characteristics of a finite-speed Carnot refrigerator. Applied Thermal Engineering.DOI
698. Lingen Chen, Fengrui Sun, Chih Wu (1996). Optimum collector temperature for solar heat engines. International Journal of Ambient Energy.DOI
699. Chih Wu, Lingen Chen, Fengrui Sun (1996). Performance of a regenerative Brayton heat engine. Energy.DOI
700. 陈林根，孙丰瑞（1995）. 回热对闭式燃气轮机循环性能的影响. 《船舶工程》.
701. 陈林根，孙丰瑞，彭义恒（1995）. 高效亚音轴流压气机级几何参数最佳选择. 《航空动力学报》.
702. Lingen Chen, Fengrui Sun, Wenzhen Chen (1995). Optimization of the specific rate of refrigeration in combined refrigeration cycles. Energy.DOI
703. 陈文振，孙丰瑞，周猛，陈林根，陈少棠（1994）. 混合热阻条件下不可逆卡诺热机的优化性能. 《兵工学报》.
704. 孙丰瑞，陈文振，陈林根，赖锡棉（1993）. 热电发电机优化的有限时间热力学准则. 《工程热物理学报》.
705. 陈林根，孙丰瑞，陈文振（1993）. 闭式燃气轮机的最大功率输出. 《船舶工程》.
706. 陈林根，孙丰瑞，陈文振（1993）. 论定常态流热机的比功率优化. 《燃气轮机技术》.
707. 陈林根，彭义恒，曹跃云（1993）. 增压压气机的最优设计研究. 《内燃机学报》.
708. 陈林根，孙丰瑞，陈文振（1993）. 化学反应驱动热机的功率优化. 《海军工程大学学报》.
709. 陈林根，孙丰瑞，陈文振（1993）. 关于CA效率、不可逆热机和有限时间热力学发展. 《热能动力工程》.
710. 陈林根，孙丰瑞，陈文振（1993）. 热漏对热机功率效率特性的影响. 《海军工程大学学报》.
711. 陈林根，陈少堂，孙丰瑞，陈文振（1993）. 一类与传热定律无关的内可逆热机最优构型. 《燃气轮机技术》.
712. 孙丰瑞，陈林根，陈文振（1993）. 内可逆卡诺热泵的生态学优化性能. 《海军工程大学学报》.
713. 陈林根，孙丰瑞，陈文振，唐开元，陈少棠（1992）. 热力循环的有限时间(火用)经济品质因素. 《热能动力工程》.
714. 陈林根（1992）. 最近十年叶轮机械最优设计的一些进展. 《热能动力工程》.
715. 陈林根（1992）. GE公司中冷回热燃气轮机发展规划. 《热能动力工程》.
716. 陈林根（1992）. 《船舶汽轮机》出版. 《热能动力工程》.
717. 陈文振，孙丰瑞，陈林根（1992）. 过程速率有限对卡诺制冷机制冷系数与利润率间关系的影响. 《海军工程大学学报》.
718. 陈林根（1992）. 轴流式压气机级多目标优化简介. 《燃气轮机技术》.
719. 陈林根，孙丰瑞，陈文振（1991）. 卡诺热机的最佳利润与效率间的关系. 《热能动力工程》.
720. 陈林根，孙丰瑞，唐开元，陈文振，陈少棠（1991）. 传热规律对卡诺热泵有限时间(火用)经济最优性能的影响. 《海军工程大学学报》.
721. 孙丰瑞，陈林根，陈文振（1991）. 二热源机的全息热效率与利润率谱. 《内燃机学报》.
722. 孙丰瑞，陈文振，陈林根（1991）. Q∝Tn时不可逆卡诺热泵的最优性能. 《海军工程大学学报》.
723. 陈林根，孙丰瑞，陈文振（1991）. q∝△(T-1)传热时三热源热泵的最优性能普遍关系. 《海军工程大学学报》.
724. 孙丰瑞，陈文振，陈林根（1991）. 不可逆正、反向卡诺循环的最优性能与熵产率. 《工程热物理学报》.
725. 陈林根，孙丰瑞，陈文振（1991）. 太阳能热机的有限时间热力学优化准则. 《热能动力工程》.
726. 陈林根，孙丰瑞，陈文振（1990）. 传热规律对卡诺热机性能的影响. 《工程热物理学报》.
727. 陈文振，孙丰瑞，陈林根（1990）. 热源间定常态能量转换热机的面积特性. 《工程热物理学报》.
728. 孙丰瑞，陈文振，陈林根（1990）. 二源间反向内可逆卡诺循环全谱分析及最佳参数的选择. 《海军工程大学学报》.
729. 陈林根，孙丰瑞，陈文振（1990）. q（T,Tw）=α（1/Tw-1/T）传热情况下卡诺热泵的最佳供热系数与供热率间的关系. 《热能动力工程》.
730. 陈林根，张俊迈，胡德明（1990）. 汽轮齿轮机组分层设计最优化方法研究. 《热能动力工程》.
731. 陈林根（1990）. 径轴流涡轮动叶出口扭曲规律与几何参数一体化最优设计方法. 《热能动力工程》.
732. 陈林根（1990）. 燃气轮机实际简单循环的分析. 《汽轮机技术》.
733. 陈林根（1990）. 考虑动叶出口最佳流型的径—轴流式涡轮多目标优化方法. 《海军工程大学学报》.
734. 陈文振，孙丰瑞，陈林根（1990）. 关于有限时间热力学的最小熵产生最大值原则. 《海军工程大学学报》.
735. 陈林根，张俊迈（1989）. 轴流式透平机械通流部分优化设计的现状和发展. 《动力工程学报》.
736. 陈林根（1989）. MS24-2型船用主汽轮齿轮机组. 《热能动力工程》.
737. 孙丰瑞，陈林根，陈文振（1989）. 热源间定常态能量转换热机有限时间热力学分析和评估. 《热能动力工程》.
738. 陈林根，孙丰瑞，陈文振（1989）. 热机有限时间热力学:理论和应用. 《热能动力工程》.
739. 陈林根（1989）. 《舰船汽轮机优化设计与工况分析》出版. 《热能动力工程》.
740. 陈林根（1989）. 考虑动叶出口最佳流型的径—轴流式涡轮多目标优化法. 《航空动力学报》.
741. 陈林根（1989）. 考虑动叶出口最佳流型的径-轴流式涡轮多目标优化方法. 《舰船科学技术》.
742. 陈林根（1989）. 某型蒸汽舰船倒车机动性计算. 《舰船科学技术》.
743. 张俊迈，陈林根（1988）. 舰用汽轮机装置主机经济性研究——以设计工况效率为目标的初步优化设计. 《舰船科学技术》.
744. 胡德明，陈林根（1988）. 舰船功率分半传动两级齿轮减速器初步设计的优化方法. 《舰船科学技术》.
745. 陈林根，张俊迈（1988）. 透平机械CAD/CAM应用技术. 《热能动力工程》.
746. 胡德明，陈林根（1987）. 减小舰用机组冷凝器的重量尺寸——以带水总重最小为目标的初步设计优化. 《海军工程大学学报》.
747. 陈林根，张俊迈（1987）. 船用蒸汽透平级组多目标规划决策(MODM)分析. 《热能动力工程》.
748. 陈林根，张俊迈（1986）. 双列速度级的效率优化. 《海军工程大学学报》.
749. 陈林根，张迈俊（1986）. 多目标规划决策(MODM)与舰用蒸汽透平通流部设计. 《热能动力工程》.

书籍章节

1. Shaojun Xia, Lingen Chen, Fengrui Sun (2010). Entransy dissipation minimization for liquid-solid phase change processes. Science China Technological Sciences.DOI