陈登福

期刊论文

1. 刘鹏，陈登福，华倩，王宇城（2026）. 不同纳米颗粒增强相Ni–Co–Cr合金基复合镀层的性能及界面结构. 《电镀与涂饰》.DOI
2. Haibin Li, Songyuan Ai, Haohao Zhang, Mujun Long, Huamei Duan, Dengfu Chen, Danbin Jia (2026). Synergistic Boron–Titanium Additions for Dual Enhancement of Neutron Absorption and Corrosion Resistance in Gd-Containing Stainless Steel. Metallurgical and Materials Transactions B.DOI
3. Mujun Long, Haohao Zhang, Songyuan Ai, Kai Wang, Yanming Zhang, Dengfu Chen (2026). TiN Precipitation in Ti-Bearing Ultra-High-Strength Steel Considering Real-Time Varying Solidification Rates: Growth Kinetics and Prediction Model. Metallurgical and Materials Transactions B.DOI
4. Xiaotian Zhang, Lu Xu, Yi Yang, Chao Li, Zelin Li, 冀成庆, Yaru Cui, Huamei Duan, Mujun Long, Dengfu Chen (2026). P-Fe coupling behavior and mechanistic insights during selective Lithium extraction from spent LiFePO4. Separation and Purification Technology.DOI
5. Lang Zhao, Ganming Cao, Yue Lai, Yandong Li, Dengfu Chen, Mujun Long, Huamei Duan (2026). Performance and Stability of LaFe1-xCoxO3 Perovskite Oxygen Carriers in Chemical Looping Partial Oxidation of Methane. JOM.DOI
6. Kun Li, Songyuan Ai, Jiamin Guo, Mujun Long, Dengfu Chen, Jie Yang, Anpu Chen, Xin Xiao (2026). A Three-Dimensional Bulging Deformation Prediction Model for Slab in High-Speed Continuous Casting Considering the Effect of Molten Steel Deviation Flow. Metallurgical and Materials Transactions B.DOI
7. Hao Hu, Pei Xu, Rongcheng Sheng, Dengfu Chen, Huamei Duan, Mujun Long (2026). Analysis of solidification shrinkage of hypoperitectic steel in the mold during ultra-high-speed continuous casting. Journal of Materials Research and Technology.DOI
8. Hao Hu, Pei Xu, Mujun Long, Huamei Duan, Dengfu Chen (2026). Multiphase Flow Simulation of Ultra-High Casting Speed and Flux Effects on Meniscus Stability in Billet Continuous Casting. Metallurgical and Materials Transactions B.DOI
9. Shuang Xu, Ganming Cao, Feixiang Peng, Zeyu Huang, Huamei Duan, Dengfu Chen (2026). Recovery of Valuable Metals from Spent Lithium-Ion Batteries by Electrolysis of NaCl Solution: Process Optimization, Regenerated Cathode Materials. ˜The œminerals, metals & materials series.DOI
10. Pengyu Tian, Yucheng Wang, Zhidan Huang, Dengfu Chen, Mujun Long (2026). Study on the Influence of Split Bag Structure on Flow Heat Transfer in Direct-Chill Casting of Large Aluminum Alloy Plates. ˜The œminerals, metals & materials series.DOI
11. Rundong Zhang, Zhiqiang Zhao, Songyuan Ai, YiFan Li, Mujun Long, Dengfu Chen (2026). Effects of Cryogenic Treatment on Mechanical Properties and Microstructure of X80 Pipeline Steel. ˜The œminerals, metals & materials series.DOI
12. Shuaishuai Xiao, Fuyu Zhang, Chun Lin He, Danbin Jia, Songyuan Ai, Dengfu Chen, Huamei Duan, Mujun Long (2026). Simulation Study on Electromagnetic Ultrasonic Signal Propagation for Defect Detection in Aluminum Plates. ˜The œminerals, metals & materials series.DOI
13. Zhenyao Chen, Chun Lin He, Xin Xie, Jianchao Guan, Dengfu Chen, Mujun Long (2026). Optimization of Cooling Structure in Mold for Ultra-large Beam Blanks. ˜The œminerals, metals & materials series.DOI
14. 张浩浩，何春，高琦，吴娇，龙俨丽，张晏铭，龙木军，陈登福（2025）. 含硼钢连铸冷却过程氮化物竞争析出规律. 《钢铁钒钛》.
15. 刘鹏，陈登福，华倩，王宇城（2025）. Ni-Co-Cr三元合金镀层共沉积制备方法及性能研究. 《表面技术》.DOI
16. 杜一哲，陈桢垚，段华美，龙木军，陈登福（2025）. Ni-Co-C合金涂层的合成与性能强化机制（英文）. Transactions of Nonferrous Metals Society of China.
17. 杨鑫华，黄致丹，高琦，张晏铭，张忍德，余进涛，陈登福，艾松元，龙木军（2025）. 周向水流密度分布对超大规格异型坯连铸凝固传热的影响. 《重型机械》.DOI
18. Xinyi Yuan, Rongcheng Sheng, Yizhe Du, Dengfu Chen, Mujun Long, Huamei Duan (2025). Effect of Cryogenic Treatment on Microstructural Evolution and Tribological Properties of Ni-Co-Cr/SiC Nanocomposite Coatings. Metals.DOI
19. Zhenghao Wang, Songming Zheng, Shuang Xu, Huamei Duan, Dengfu Chen, Mujun Long, Yandong Li (2025). Impact of water on accelerated semi-dry carbonation of BOF slag and life cycle assessment for its utilization in cement paste. Process Safety and Environmental Protection.DOI
20. Xiaodong Yang, Zhenyao Chen, Jianchao Guan, Xin Liang Xie, Chun He, Hao Hu, Mujun Long, Jianhua Liu, Dengfu Chen (2025). Multi-Dimensional Uniform Cooling Process for Ship Plate Steel Continuous Casting. Metals.DOI
21. Yizhe Du, Z. Chen, Huamei Duan, Mujun Long, Dengfu Chen (2025). Synthesis and performance enhancement mechanisms of Ni−Co−C alloy coatings. Transactions of Nonferrous Metals Society of China.DOI
22. Peng Liu, Dengfu Chen, Qian Hua, Yucheng Wang, Rongcheng Sheng (2025). Dispersion strengthening in Ni–Co–Cr–SiC coatings: Effects of particle-matrix adhesion and dislocation obstruction revealed by multiscale modeling. Journal of Materials Research and Technology.DOI
23. Bingzhi Ren, Lilong Zhu, Hongdan Wang, Dengfu Chen (2025). Numerical Simulation of Fluid Flow and Solidification in Round Bloom Continuous Casting with Alternate Final Electromagnetic Stirring. Metals.DOI
24. Songyuan Ai, Xinhua Yang, Mujun Long, Rundong Zhang, Jingjun Zhao, Dengfu Chen, Danbin Jia (2025). Enhancing Microstructure and Hydrogen Embrittlement Resistance with Nb-V Alloying in Ultra-High Strength Hot Stamping Steel. Springer Proceedings in Materials.DOI
25. Yifan Li, Songyuan Ai, Rundong Zhang, Lihua Wan, Mujun Long, Dengfu Chen, Danbin Jia (2025). Enhancing the Microstructure and Mechanical Properties of API 5LB Pipeline Steel Using Deep Cryogenic Treatment. ˜The œminerals, metals & materials series.DOI
26. Xinyi Yuan, Yizhe Du, Hao Hu, Dengfu Chen, Huamei Duan (2025). Effect of Deep Cryogenic Treatment on the Structure and Properties of Ni–Co–Cr Alloy Coating. ˜The œminerals, metals & materials series.DOI
27. Songyuan Ai, Lihua Wan, Mujun Long, Rundong Zhang, Yifan Li, Dengfu Chen, Danbin Jia (2025). Quantitative Investigation on Hydrogen Embrittlement Susceptibility of Typical Pipeline Steel Through Hydrogen Permeation and Slow Strain Rate Tensile Tests. ˜The œminerals, metals & materials series.DOI
28. Haohao Zhang, Songyuan Ai, Mujun Long, Danbin Jia, Dengfu Chen, Huamei Duan (2025). Precipitation and Dissolution Behavior of Ti(Cx,N1-x) During the TSCR Process of Ti-Containing 22MnB5 Steel. Springer Proceedings in Materials.DOI
29. Hao Hu, Li Li, Pengyu Tian, Huamei Duan, Dengfu Chen (2025). Preparation Techniques and Mechanical Properties of Ni–Co–B–SiC Coatings for Wear-Resistant Applications. ˜The œminerals, metals & materials series.DOI
30. Yinhui Chen, Zhenyao Chen, Mujun Long, Dengfu Chen (2025). High-Temperature Physical Performance Testing of 20CrMnTi Billet and Simulation Application in the Continuous Casting Process. ˜The œminerals, metals & materials series.DOI
31. 谢鑫，吴晨辉，胡浩，龙木军，陈登福（2024）. 汽车面板钢用低反应性引流砂的开发及应用. 《第十二届中国金属学会青年学术年会暨首届〝碳中和〞冶金青年科学家沙龙论文集（一）》.DOI
32. 贾丹彬，张富宇，袁磊，段华美，陈登福，龙木军（2024）. 脉冲电流处理对304不锈钢微观结构及腐蚀性能的影响研究. 《第十二届中国金属学会青年学术年会暨首届〝碳中和〞冶金青年科学家沙龙论文集（一）》.DOI
33. 胡淏，王先扬，吴晨辉，石鹏，谢鑫，曾建华，龙木军，陈登福（2024）. 高碳钢中包渣连铸过程理化性能的劣化演变研究. 《钢铁钒钛》.
34. 张润东，万力华，李一帆，艾松元，龙木军，陈登福（2024）. 氢渗入对X80管线钢组织性能影响的实验研究. 《第十二届中国金属学会青年学术年会暨首届〝碳中和〞冶金青年科学家沙龙论文集（一）》.DOI
35. 张晏铭，孙攀，王志焕，龙木军，陈登福，贾丹彬（2024）. 高温连铸坯表面氧化层生长动力学分析. 《连铸》.
36. Yue Lai, Ganming Cao, Yanhong Fang, Chengrui Wang, Huamei Duan, Yandong Li, Dengfu Chen, Mujun Long (2024). Syngas Production by Fe2SiO4 Oxygen Carrier in Chemical Looping Partial Oxidation of Methane. Catalysts.DOI
37. Songming Zheng, Shuang Xu, Zhenghao Wang, Huamei Duan, Dengfu Chen, Mujun Long, Yandong Li (2024). Efficient leaching of valuable metals from spent lithium-ion batteries using green deep eutectic solvents: Process optimization, mechanistic analysis, and environmental impact assessment. Journal of Cleaner Production.DOI
38. Yizhe Du, Hao Hu, Xinyi Yuan, Mujun Long, Huamei Duan, Dengfu Chen (2024). Cryogenic treatment induces microstructure evolution and coordinately regulates mechanical properties of CuCrZr alloys through multiple strengthening mechanisms. Journal of Alloys and Compounds.DOI
39. Yizhe Du, Xinyi Yuan, Hao Hu, Pengyu Tian, Mujun Long, Dengfu Chen (2024). Microstructure evolution and wear resistance enhancement of nano-NiCoC alloy coatings via cryogenic treatment. Surface and Coatings Technology.DOI
40. Songyuan Ai, Yanming Zhang, Mujun Long, Haohao Zhang, Lihua Wan, Danbin Jia, Dengfu Chen (2024). A prediction model for austenite grain size distribution of casting slab in thermal rebound process: Considering α-ferrite precipitation and re-austenization. Journal of Materials Research and Technology.DOI
41. Y. Y. Huang, Zitao Zeng, Dengfu Chen, Jian Zhang, Zhe Yang, Jianyu Long, Chuan Li (2024). Effect of oxide scale on strand surface temperature field determined by infrared thermography. International Journal of Thermal Sciences.DOI
42. Yizhe Du, Hao Hu, Danbin Jia, Huamei Duan, Dengfu Chen (2024). Atomic-scale insights into precipitates and their interfacial properties in CuCrZr alloys induced by cryogenic treatment. Journal of Materials Research and Technology.DOI
43. Rundong Zhang, Songyuan Ai, Mujun Long, Lihua Wan, Yifan Li, Danbin Jia, Huamei Duan, Dengfu Chen (2024). Quantitative Study on Hydrogen Concentration–Hydrogen Embrittlement Sensitivity of X80 Pipeline Steel Based on Hydrogen Permeation Kinetics. Metals.DOI
44. Zhenghao Wang, Songming Zheng, Huamei Duan, Dengfu Chen, Mujun Long, Yandong Li (2024). Enhanced Carbonation of Free CaO in Basic Oxygen Furnace Slag Under High Temperature and Moderate Pressure and Its Kinetics. JOM.DOI
45. Chengrui Wang, Songming Zheng, Mujun Long, Dengfu Chen, Huamei Duan, Yandong Li (2024). Enhanced reactivity over Ce2(SO4)3/MgO with NiO modification for chemical looping partial oxidation of methane. International Journal of Hydrogen Energy.DOI
46. Li Li, Hao Hu, Yizhe Du, Mujun Long, Huamei Duan, Dengfu Chen (2024). Electrodeposited Ni–Co–B coatings: Preparation and evaluation of its wear resistance. Journal of Materials Research and Technology.DOI
47. Zhidan Huang, Xinhua Yang, Qi Gao, Zhenyao Chen, Mujun Long, Dengfu Chen (2024). The influence of SEN structure on the flow and solidification phenomena in ultra-large-section beam blank mould. Journal of Materials Research and Technology.DOI
48. Songyuan Ai, Yifan Li, Mujun Long, Haohao Zhang, Dengfu Chen, Huamei Duan, Danbin Jia, Bingzhi Ren (2024). Effect Mechanism of α-Ferrite Sustained Precipitation on High-Temperature Properties in Continuous Casting for Peritectic Steel. Metals.DOI
49. Chengrui Wang, Shuang Bing Xu, Yandong Li, Mujun Long, Dengfu Chen, Huamei Duan (2024). Mechanistic study of chemical looping partial oxidation of methane over Ce2(SO4)3/MgO with CoO modification. Separation and Purification Technology.DOI
50. Yunwei Huang, Jing Qin, Jianyu Long, Mujun Long, Dengfu Chen, Zhe Yang, Chuan Li (2024). Experimental investigation on the effects of particulate interference on radiation thermometry. International Journal of Heat and Mass Transfer.DOI
51. Yizhe Du, Hao Hu, Xinyi Yuan, Mujun Long, Dengfu Chen (2024). Novel insights into interstitial atoms synergistically augmenting the mechanical characteristics of NiCo coating and interfacial strength with Cu substrate. Journal of Alloys and Compounds.DOI
52. Yunwei Huang, Yitong Pan, Chuan Li, Mujun Long, Dengfu Chen, Zhe Yang, Jianyu Long (2024). Real-time surface temperature measurement of steel continuous casting strand in the steam-filled spray chamber. International Journal of Thermal Sciences.DOI
53. Zhenghao Wang, Shuang Xu, Songming Zheng, Huamei Duan, Dengfu Chen, Mujun Long, Yandong Li (2024). Accelerated carbonation and stabilization of BOF slag: data fitting relationship between particle size and CO 2 sequestration. Journal of Sustainable Cement-Based Materials.DOI
54. Xianyang Wang, Hao Hu, Peng Shi, Xin Liang Xie, Chenhui Wu, Dengfu Chen, Mujun Long (2024). Optimization of Deflector Hole on Porous Baffle Wall in Six-Strand Tundish for Bloom Continuous Casting. ˜The œminerals, metals & materials series.DOI
55. Chengrui Wang, Songming Zheng, Mujun Long, Dengfu Chen, Huamei Duan, Yandong Li (2024). Methane Chemical Looping Partial Oxidation Over NiO/Ce2(SO4)3-MgO Oxygen Carrier to Produce High Purity Syngas. ˜The œminerals, metals & materials series.DOI
56. Zhidan Huang, Xinhua Yang, Leilei Zhang, Mujun Long, Dengfu Chen (2024). Study on Solidification Shrinkage Behavior of Beam Blank Based on a High Temperature Strain Model. ˜The œminerals, metals & materials series.DOI
57. Hao Hu, Xianyang Wang, Peng Shi, Xin Liang Xie, Chenhui Wu, Mujun Long, Dengfu Chen (2024). Evolution of the Tundish Flux Microstructure During Continuous Casting Process: A Molecular Dynamics Simulation Study. ˜The œminerals, metals & materials series.DOI
58. Lihua Wan, Zhihuan Wang, Songyuan Ai, Haohao Zhang, Rundong Zhang, Mujun Long, Huamei Duan, Dengfu Chen (2024). The Effect of Injection-Production Process Parameters on the Fatigue Life of High-Pressure Injection-Production String. ˜The œminerals, metals & materials series.DOI
59. Yizhe Du, Xuan Chen, Zhenyu Sun, Dengfu Chen (2024). Electrodeposition Preparation and Performance Enhancement Mechanisms for Ni–Co–Fe Coatings. ˜The œminerals, metals & materials series.DOI
60. Yue Lai, Songming Zheng, Huamei Duan, Mujun Long, Dengfu Chen, Yandong Li, Guoquan Zhang (2024). Experimental Study on LaFeO3/Nb2O5 Oxygen Carrier in Chemical-Looping Partial Oxidation of Methane. ˜The œminerals, metals & materials series.DOI
61. Zhenghao Wang, Songming Zheng, Yue Lai, Huamei Duan, Dengfu Chen, Mujun Long, Yandong Li (2024). The Kinetic Study of Carbonation of BOF Slag at High Temperature: Impact of Particle Size Characteristics. ˜The œminerals, metals & materials series.DOI
62. 谢绍贤，张浩浩，龙木军，曾玟瑞，秦琬琳，罗芊雨，梁壮，陈登福（2023）. 不同连铸冷却强度下22MnB5钢的组织演变行为. 《钢铁》.
63. Peizhao Tang, Haohao Zhang, Mujun Long, Dengfu Chen, Kai Wang (2023). A Prediction Model for Continuous Growth of Austenite Grains in Steel Casting Blank: Considering Complex Temperature Variation. Metallurgical and Materials Transactions B.DOI
64. Haohao Zhang, Lihua Wan, Mujun Long, Songyuan Ai, Kai Wang, Peizhao Tang, Huamei Duan, Dengfu Chen (2023). Quantitative Investigation on the Evolution of Ti(Cx, N1−x) in Ultra-high-Strength Steel Slab During TSCR Process: Precipitation and Redissolution. Metallurgical and Materials Transactions B.DOI
65. Yizhe Du, Xinyi Yuan, Peng Liu, Mujun Long, Dengfu Chen (2023). Uncovering the influence mechanism of nonmetallic atoms on the mechanical properties of Ni3Co alloy. Journal of Materials Research and Technology.DOI
66. Yizhe Du, Yinhui Chen, Xinyi Yuan, Peng Liu, Mujun Long, Dengfu Chen (2023). Potential mechanisms of interstitial atomic enhancement and interface failure behavior in Ni3Co/Cu systems. Applied Surface Science.DOI
67. Peilong Xu, Yongzhi Zhou, Zhidan Huang, Dengfu Chen, Mujun Long (2023). Investigation on Heat Transfer in Molds with Different Water-Cooling Structures Under Billet High-Speed Continuous Casting. Metallurgical and Materials Transactions B.DOI
68. Sijie Wang, Peilong Xu, Yongzhi Zhou, Huamei Duan, Dengfu Chen, Mujun Long (2023). The Effect of Mold Structure and Cooling Parameters on Heat Transfer during Billet High-Speed Continuous Casting. Materials.DOI
69. Chengrui Wang, Yue Lai, Zhenghao Wang, Mujun Long, Dengfu Chen, Huamei Duan, Guoquan Zhang, Yandong Li (2023). Insights into methane to syngas on stoichiometric and defect Ce2(SO4)3 crystal surface. Applied Surface Science.DOI
70. Haohao Zhang, Mujun Long, Peizhao Tang, Songyuan Ai, Wei Guo, Dengfu Chen, Jialu Wu (2023). Study on Austenite Grain Growth Law of Ultra‐High Strength Hot‐Stamped 22MnB5 Steel During Thin Slab Casting and Rolling Process. steel research international.DOI
71. Xianyang Wang, Sijie Wang, Hao Hu, Xin Liang Xie, Chenhui Wu, Dengfu Chen, Mujun Long (2023). Flow Behavior of Liquid Steel in Fewer Strands Casting of Six-Strand Bloom Tundish. Metals.DOI
72. 郭伟，龙木军，吴家璐，张浩浩，艾松元，陈登福（2022）. 22MnB5钢溶质分配系数及TiN析出对微观偏析的影响. 《钢铁》.
73. 王先扬，胡淏，谢鑫，吴晨辉，龙木军，陈登福（2022）. 大方坯六流中间包少流浇注时钢液的流动行为. 《连铸》.
74. 张浩浩，吴家璐，龙木军，郭伟，杨晓东，陈登福（2022）. 超高强热成形钢TSCR中微米级Ti(Cx,N1-x)的析出演变. 《连铸》.
75. Songyuan Ai, Mujun Long, Xinhua Yang, Dengfu Chen, Huamei Duan (2022). Prediction model for crack sensitive temperature region and phase fractions of slab under continuous casting cooling rates based on finite number of experiments. Journal of Materials Research and Technology.DOI
76. Chengrui Wang, Yanhong Fang, Zhenghao Wang, Mujun Long, Dengfu Chen, Huamei Duan, Yandong Li, Guoquan Zhang (2022). Performance and mechanism study of Ce2(SO4)3 for methane chemical looping partial oxidation. Fuel.DOI
77. Shuang Liu, Songyuan Ai, Mujun Long, Yi Feng, Jingjun Zhao, Yan Zhao, Xiang Gao, Dengfu Chen, Mingtu Ma (2022). Evolution of Microstructures and Mechanical Properties of Nb-V Alloyed Ultra-High Strength Hot Stamping Steel in Austenitizing Process. Materials.DOI
78. Peng Liu, Xinyi Yuan, Yizhe Du, Mujun Long, Huamei Duan, Dengfu Chen (2022). Exploration of electrodeposited process of Ni-Co-Cr coating and investigation of Cr doping strengthening mechanism by indentation simulation. Journal of Materials Processing Technology.DOI
79. Yizhe Du, Zhidan Huang, Mujun Long, Huamei Duan, Dengfu Chen (2022). Unveiling the Effect of CaF2 on the Microstructure and Transport Properties of Phosphosilicate Systems. Materials.DOI
80. Qiang Liu, Yizhe Du, Peilong Xu, Dengfu Chen, Mujun Long (2022). Optimization of Nozzle Parameters by Investigating the Flow Behavior of Molten Steel in the Mold under a High Casting Speed. Metals.DOI
81. Peilong Xu, Sijie Wang, Yongzhi Zhou, Dengfu Chen, Mujun Long, Huamei Duan (2022). Thickness Distributions of Mold Flux Film and Air Gap in Billet Ultra-High Speed Continuous Casting Mold Through Multiphysics Modeling. Frontiers in Materials.DOI
82. Peilong Xu, Yongzhi Zhou, Dengfu Chen, Mujun Long, Huamei Duan (2022). Optimization of submerged entry nozzle parameters for ultra-high casting speed continuous casting mold of billet. Journal of Iron and Steel Research International.DOI
83. 张梦远，龙木军，左小坦，钱亮，张亚兵，黄雁，陈登福（2021）. 低碳含硼钢方坯表面淬火工艺及组织演变. 《材料热处理学报》.DOI
84. 李丽，杜一哲，汪勤政，陈登福（2021）. Q345钢连铸坯压缩状态下的高温力学性能. 《中国冶金》.DOI
85. 杜一哲，李丽，汪勤政，陈登福（2021）. 特厚板坯单辊重压下铸坯温度与应力的分析. 《连铸》.DOI
86. 黎建全，龙木军，陈登福，周明佳（2021）. 板坯连铸机二次冷却均匀性的分析与优化. 《炼钢》.
87. 王林杰，孔令种，冯亮花，杨杰，陈登福（2021）. 高拉速方坯连铸结晶器钢渣界面行为特征. 《连铸》.DOI
88. Li Li, Peng Liu, Yongzhi Zhou, Huamei Duan, Mujun Long, Dengfu Chen (2021). Mechanical properties and electronic structures of borides in Ni-Co-B alloy system. Materials Letters.DOI
89. Lintao Gui, Hao Zhang, Yan Hui Zhao, Yangwei Wang, Dengfu Chen, Xinyi Wang, Gazi Mahmud, Mujun Long (2021). Effects of carbon segregation and interface roughness on the mobility of solid-liquid interface in Fe-C alloy: A molecular dynamics study. Materialia.DOI
90. Peng Liu, Xianyang Wang, Dengfu Chen, Mujun Long, Huamei Duan (2021). Interface structure characterization and elements doping on interface bonding strength and tensile failure mechanism of NiCo coating/Cu matrix. Results in Physics.DOI
91. Helin Fan, Ruixiang Wang, Zhifeng Xu, Huamei Duan, Dengfu Chen (2021). The effect of B2O3 on the structure and properties of titanium slag melt by molecular dynamics simulations. Journal of Materials Research and Technology.DOI
92. Helin Fan, Ruixiang Wang, Zhifeng Xu, Huamei Duan, Dengfu Chen (2021). Migration and Enrichment Behaviors of Ca and Mg Elements during Cooling and Crystallization of Boron-Bearing Titanium Slag Melt. Crystals.DOI
93. Chengrui Wang, Yanhong Fang, Huamei Duan, Guangfen Liang, Wanying Li, Dengfu Chen, Mujun Long (2021). DFT study of CO2 adsorption properties on pristine, vacancy and doped graphenes. Solid State Communications.DOI
94. Sheng Yu, Mujun Long, Mengyuan Zhang, Dengfu Chen, Peilong Xu, Huamei Duan, Jie Yang (2021). Effect of mold corner structures on the fluid flow, heat transfer and inclusion motion in slab continuous casting molds. Journal of Manufacturing Processes.DOI
95. Helin Fan, Ruixiang Wang, Zhifeng Xu, Huamei Duan, Dengfu Chen (2021). Structural and transport properties of FeO-TiO2-SiO2 systems: Insights from molecular dynamics simulations. Journal of Non-Crystalline Solids.DOI
96. Yunwei Huang, Jianyu Long, Dengfu Chen, Mujun Long, Zhe Yang, Chuan Li (2021). Temperature errors in two-color pyrometry simultaneously considering reflection and combustion gas radiation. Optics Express.DOI
97. Yizhe Du, Yonggui Yuan, Li Li, Mujun Long, Huamei Duan, Dengfu Chen (2021). Insights into structure and properties of P2O5-based binary systems through molecular dynamics simulations. Journal of Molecular Liquids.DOI
98. Dong-Yuan Sheng, Dengfu Chen (2021). Comparison of Fluid Flow and Temperature Distribution in a Single-Strand Tundish with Different Flow Control Devices. Metals.DOI
99. Chengrui Wang, Yanhong Fang, Guangfen Liang, Xiangyong Lv, Huamei Duan, Yandong Li, Dengfu Chen, Mujun Long (2021). Mechanistic study of Cu-Ni bimetallic catalysts supported by graphene derivatives for hydrogenation of CO2 to methanol. Journal of CO2 Utilization.DOI
100. Wenxiang Jiang, Mujun Long, Dengfu Chen, Songyuan Ai, Huamei Duan (2021). Temperature Distribution in the As-Cast Steel Specimen During Gleeble Hot-Tensile Test and Its Effect on High-Temperature Mechanical Properties. Metallurgical and Materials Transactions B.DOI
101. Siyuan Zhang, Mujun Long, Haohao Zhang, Songyuan Ai, Dengfu Chen, Peng Liu, Huamei Duan (2021). Experimental study on evolution of oxidation behavior on high-temperature continuous casting slab surface. Journal of Materials Research and Technology.DOI
102. Huamei Duan, Chengrui Wang, Yanhong Fang, Guangfen Liang, Yandong Li, Dengfu Chen, Mujun Long (2021). Comprehensive Utilization of Boron-Concentrate by Hydrometallurgy. Journal of Sustainable Metallurgy.DOI
103. 张梦远，李丽，杜一哲，陈登福，龙木军，段华美（2020）. 基于方坯连铸过程末端电磁搅拌的二次冷却研究. 《第五届全国电磁冶金与强磁场材料科学年会》.DOI
104. 李丽，杜一哲，汪勤政，陈登福（2020）. Q345连铸坯的高温力学性能. 《第五届全国电磁冶金与强磁场材料科学年会》.DOI
105. 郭伟，张浩浩，龙木军，艾松元，陈登福，段华美（2020）. 22MnB5钢连铸过程中碳氮化钛析出热力学研究. 《第五届全国电磁冶金与强磁场材料科学年会》.DOI
106. 陈登福，徐佩，龙木军，段华美，杨杰，吴石新（2020）. 钢液连铸二次冷却先进工艺模型的发展与研究. 《钢铁》.DOI
107. 张思远，龙木军，艾松元，谭锴，陈登福，黄云伟（2020）. 连铸坯氧化行为及其对铸坯冷却降温的影响. 《钢铁研究学报》.DOI
108. 艾松元，郭伟，张浩浩，龙木军，陈登福，段华美（2020）. 磁性状态转变对铸坯基体相弹性性能的影响. 《第五届全国电磁冶金与强磁场材料科学年会》.DOI
109. 龙木军，陈登福，段华美，刁江（2020）. 冶金工程专业本科创新性人才培养研究. 《科教导刊》.DOI
110. Helin Fan, Ruixiang Wang, Huamei Duan, Dengfu Chen, Zhifeng Xu (2020). Structural and transport properties of TiO2-SiO2-MgO-CaO system through molecular dynamics simulations. Journal of Molecular Liquids.DOI
111. Peng Liu, Li Li, Sheng Yu, Songyuan Ai, Mujun Long, Dengfu Chen (2020). Effect of transition metal element additions on the mechanical and electronic properties of L10 CoNi alloys. Extreme Mechanics Letters.DOI
112. Peng Liu, Yizhe Du, Songyuan Ai, Peilong Xu, Jie Yang, Huamei Duan, Dengfu Chen (2020). The effect of the elements Cr, Os, Ir, and Y additions on the mechanical and electronic properties of L12 Ni3Co alloys. Journal of Applied Physics.DOI
113. Shuang Liu, Mujun Long, Siyuan Zhang, Yan Zhao, Jingjun Zhao, Yi Feng, Dengfu Chen, Mingtu Ma (2020). Study on the prediction of tensile strength and phase transition for ultra-high strength hot stamping steel. Journal of Materials Research and Technology.DOI
114. Peilong Xu, Dengfu Chen, Yizhe Du, Hengsong Yu, Mujun Long, Peng Liu, Huamei Duan, Jie Yang (2020). Hydraulic Modeling on Flow Behavior in High-Speed Billet Continuous Casting Mold Considering Hydrostatic Pressure and Solidified Shell. Metals.DOI
115. Jie Yang, Dengfu Chen, Fengting Qin, Mujun Long, Huamei Duan (2020). Melting and Flowing Behavior of Mold Flux in a Continuous Casting Billet Mold for Ultra-High Speed. Metals.DOI
116. Lintao Gui, Mujun Long, Haohao Zhang, Dengfu Chen, Shuang Liu, Qinzheng Wang, Huamei Duan (2020). Study on the precipitation and coarsening of TiN inclusions in Ti-microalloyed steel by a modified coupling model. Journal of Materials Research and Technology.DOI
117. Sheng Yu, Mujun Long, Peng Liu, Dengfu Chen, Huamei Duan, Jie Yang (2020). Experimental simulation on the high-temperature friction property of slag in slab continuous casting mold. Journal of Materials Research and Technology.DOI
118. Songyuan Ai, Mujun Long, Wei Hua Guo, Peng Liu, Dengfu Chen, Zhihua Dong, Yanming Zhang, Huamei Duan (2020). Ab Initio Study on Continuous Evolution of Mechanical Properties in Phase‐Transition Region of Low‐Carbon Steel. steel research international.DOI
119. Jie Yang, Dengfu Chen, Mujun Long, Huamei Duan (2020). Transient flow and mold flux behavior during ultra-high speed continuous casting of billet. Journal of Materials Research and Technology.DOI
120. Songyuan Ai, Mujun Long, Siyuan Zhang, Dengfu Chen, Zhihua Dong, Peng Liu, Yanming Zhang, Huamei Duan (2020). Ab Initio Calculations on Elastic Properties of IF Steel Matrix Phase at High Temperature Based on Lattice Expansion Theory. Metals.DOI
121. Jie Yang, Dengfu Chen, Miaoyong Zhu (2020). Crystallization and heat transfer of CaO–SiO2-based slag for high-Mn–high-Al steel. Journal of Iron and Steel Research International.DOI
122. Xiangyong Lv, Guangfen Liang, Qinzheng Wang, Yandong Li, Huamei Duan, Dengfu Chen, Mujun Long, Qingqing Hu, Funian Han, Linpei Li (2020). The Reduction of Cu2+ Promoted by Zn or Ni on rGO. JOM.DOI
123. Shuang Liu, Mujun Long, Songyuan Ai, Yan Zhao, Dengfu Chen, Yi Feng, Huamei Duan, Mingtu Ma (2020). Evolution of Phase Transition and Mechanical Properties of Ultra-High Strength Hot-Stamped Steel During Quenching Process. Metals.DOI
124. Pingmei Tang, Sen Wang, Huamei Duan, Mujun Long, Yandong Li, Shuqian Fan, Dengfu Chen (2020). The Formation of Humps and Ripples During Selective Laser Melting of 316l Stainless Steel. JOM.DOI
125. Tao Liu, Dengfu Chen, Mujun Long, Peng Liu, Huamei Duan, Lintao Gui, Helin Fan, Huabiao Chen (2020). Control of Coarse Precipitates of Titanium Nitride in High-Strength Low-Alloy Steel. Metal Science and Heat Treatment.DOI
126. 赵晶军，龙木军，汪勤政，曹俊生，刘涛，陈登福（2019）. 不同冷速下钛微合金化Q345B钢的HAZ组织及性能. 《中国冶金》.
127. 艾松元，龙木军，张梦远，陈登福，刘鹏，董志华（2019）. L245MB钢铸坯高温强度与弹性性能研究. 《钢铁》.DOI
128. 吴石新，陈登福，汪勤政，靳星，刘涛，龙木军，段华美（2019）. 钛微合金钢连铸中TiN与TiC析出热力学研究. 《连铸》.DOI
129. 谭锴，赵晶军，龙木军，吴石新，黄云伟，陈登福，张许阳（2019）. 水雾对高温铸坯表面辐射测温影响的实验研究. 《连铸》.DOI
130. 张梦远，陈登福，艾松元，何文杰，龙木军，段华美（2019）. 180 mm×180 mm方坯连铸二冷工艺模型研究. 《连铸》.DOI
131. 段华美，李言栋，陈登福，龙木军（2019）. 教育国际化背景下的全英文教学实践. 《教育现代化》.DOI
132. Jie Yang, Dengfu Chen, Mujun Long, Huamei Duan (2019). An Approach for Modelling Slag Infiltration and Heat Transfer in Continuous Casting Mold for High Mn–High Al Steel. Metals.DOI
133. Tao Liu, Mujun Long, Dengfu Chen, Yunwei Huang, Jie Yang, Huamei Duan, Lintao Gui, Peilong Xu (2019). Investigation of the Peritectic Phase Transition in a Commercial Peritectic Steel Under Different Cooling Rates Using In Situ Observation. Metallurgical and Materials Transactions B.DOI
134. Shuang Liu, Songyuan Ai, Mujun Long, Shixin Wu, Peilong Xu, Dengfu Chen, Qinzheng Wang (2019). Numerical Simulation of Heat Transfer between Roll and Slab under Dry Secondary Cooling in Ultrathick Slab Continuous Casting. steel research international.DOI
135. Sheng Yu, Mujun Long, Qinzheng Wang, Dengfu Chen, Peilong Xu, Huamei Duan, Shixin Wu (2019). Effect of the strand corner structure on the corner stress during the bending and straightening processes in slab continuous casting. Journal of Manufacturing Processes.DOI
136. Lintao Gui, Mujun Long, Dengfu Chen, Jingjun Zhao, Qinzheng Wang, Huamei Duan (2019). Thermodynamic study on the solute partition coefficients on L/δ and L/δ+γ phase interfaces for 1215 high-sulfur steel solidification by orthogonal design. Journal of Materials Research and Technology.DOI
137. Pingmei Tang, Sen Wang, Mujun Long, Huamei Duan, Sheng Yu, Dengfu Chen, Shuqian Fan (2019). Thermal Behavior During the Selective Laser Melting Process of Ti-6Al-4V Powder in the Point Exposure Scan Pattern. Metallurgical and Materials Transactions B.DOI
138. Peng Liu, Dengfu Chen, Qinzheng Wang, Peilong Xu, Mujun Long, Huamei Duan (2019). Crystal structure and mechanical properties of nickel–cobalt alloys with different compositions: A first-principles study. Journal of Physics and Chemistry of Solids.DOI
139. Tao Liu, Mujun Long, Dengfu Chen, Shixin Wu, Pingmei Tang, Shuang Liu, Huamei Duan, Jie Yang (2019). Investigations of the peritectic reaction and transformation in a hypo-peritectic steel: Using high-temperature confocal scanning laser microscopy and differential scanning calorimetry. Materials Characterization.DOI
140. Pingmei Tang, Haiqiong Xie, Sen Wang, Xueping Ding, Qi Zhang, Honglin Ma, Jie Yang, Shuqian Fan, Mujun Long, Dengfu Chen, Xuan‐Ming Duan (2019). Numerical Analysis of Molten Pool Behavior and Spatter Formation with Evaporation During Selective Laser Melting of 316L Stainless Steel. Metallurgical and Materials Transactions B.DOI
141. Lintao Gui, Mujun Long, Shixin Wu, Zhihua Dong, Dengfu Chen, Yunwei Huang, Huamei Duan, Levente Vitos (2019). Quantitative effects of phase transition on solute partition coefficient, inclusion precipitation, and microsegregation for high-sulfur steel solidification. Journal of Material Science and Technology.DOI
142. Yiwen Kong, Dengfu Chen, Qiang Liu, Mujun Long (2019). A Prediction Model for Internal Cracks during Slab Continuous Casting. Metals.DOI
143. Yunwei Huang, Mujun Long, Helin Fan, Lintao Gui, Dengfu Chen, Huamei Duan (2019). Quantifying the Effects of Combustion Gases’ Radiation on Surface Temperature Measurements Using Two-Color Pyrometry. Energy & Fuels.DOI
144. Zhihua Dong, Stephan Schönecker, Dengfu Chen, Wei Li, Song Lu, Levente Vitos (2019). Influence of Mn content on the intrinsic energy barriers of paramagnetic FeMn alloys from longitudinal spin fluctuation theory. International Journal of Plasticity.DOI
145. Yunwei Huang, Mujun Long, Jingjun Zhao, Helin Fan, Dengfu Chen, Kai Tan, Huamei Duan (2019). Coupled effects of reflection and absorptive gas mixture on surface temperature determined by single color pyrometer. Journal of Quantitative Spectroscopy and Radiative Transfer.DOI
146. Sheng Yu, Mujun Long, Dengfu Chen, Helin Fan, Hengsong Yu, Huamei Duan, Xin Liang Xie, Tao Liu (2019). Effect of the mold corner structure on the friction behavior in slab continuous casting molds. Journal of Materials Processing Technology.DOI
147. Yunwei Huang, Mujun Long, Dengfu Chen, Kai Tan, Huamei Duan, Peilong Xu (2019). Effect of hot water vapor on strand surface temperature measurement in steel continuous casting. International Journal of Thermal Sciences.DOI
148. Jie Yang, Zhaozhen Cai, Dengfu Chen, Miaoyong Zhu (2019). Characteristics of Slag Infiltration in High-Mn Steel Castings. Metallurgical and Materials Transactions B.DOI
149. 陈华标，龙木军，陈登福，黄云伟，桂林涛，马有光，段华美（2018）. 稀土铈对钢中溶质碳偏析影响的热力学研究. 《稀有金属材料与工程》.
150. 吴俊平，靳星，陈登福，龙木军，曹俊生，段华美，杜星宏（2018）. 含钛微合金钢的动态CCT曲线. 《金属热处理》.
151. 黄云伟，龙木军，谭锴，陈登福，段华美（2018）. 连铸二冷区铸坯表面温度在线测量系统研究与应用. 《2018年（第二十届）全国炼钢学术会议大会报告及论文摘要集》.
152. 徐佩，陈登福，喻恒松，龙木军，段华美（2018）. 高速方坯连铸结晶器钢液流动与凝固传热行为研究. 《2018年（第二十届）全国炼钢学术会议大会报告及论文摘要集》.
153. 谭锴，赵晶军，吴石新，龙木军，杨溢，陈登福，龚石开（2018）. 硫高温逸出对石油焦石墨化影响的试验研究. 《轻金属》.
154. Huamei Duan, Yandong Li, Xiangyong Lv, Dengfu Chen, Mujun Long, Liangying Wen (2018). CuO–ZnO anchored on APS modified activated carbon as an enhanced catalyst for methanol synthesis—The role of ZnO. Journal of materials research/Pratt's guide to venture capital sources.DOI
155. Helin Fan, Dengfu Chen, Peng Liu, Huamei Duan, Yunwei Huang, Mujun Long, Tao Liu (2018). Structural and transport properties of FeO-TiO2 system through molecular dynamics simulations. Journal of Non-Crystalline Solids.DOI
156. Mujun Long, Huabiao Chen, Dengfu Chen, Sheng Yu, Bin Liang, Huamei Duan (2018). A Combined Hybrid 3-D/2-D Model for Flow and Solidification Prediction during Slab Continuous Casting. Metals.DOI
157. Sheng Yu, Mujun Long, Huabiao Chen, Dengfu Chen, Tao Liu, Huamei Duan, Junsheng Cao (2018). Stress and Friction Distribution around Slab Corner in Continuous Casting Mold with Different Corner Structures. Metallurgical and Materials Transactions B.DOI
158. Huabiao Chen, Dengfu Chen, Mujun Long, Huamei Duan, Yunwei Huang, Lintao Gui (2018). Numerical modeling of centerline segregation by a combined 3-D and 2-D hybrid model during slab continuous casting. Journal of materials research/Pratt's guide to venture capital sources.DOI
159. Tao Liu, Mujun Long, Helin Fan, Dengfu Chen, Huabiao Chen, Huamei Duan, Wenxiang Jiang, Wenjie He (2018). Dilatometric determination of four critical temperatures and phase transition fraction for austenite decomposition in hypo-eutectoid steels using peak separation method. Journal of materials research/Pratt's guide to venture capital sources.DOI
160. Huamei Duan, Yunxia Yang, Jim Patel, Nick Burke, Zhai Yu-chun, Paul A. Webley, Dengfu Chen, Mujun Long (2018). The effect of the modification methods on the catalytic performance of activated carbon supported CuO-ZnO catalysts. Carbon letters.DOI
161. Helin Fan, Huamei Duan, Wenjie He, Dengfu Chen, Tao Liu, Mujun Long, Peilong Xu (2018). Sequential extraction of vanadium and chromium from chromium-bearing vanadium slag through two-stage soda roasting-water leaching. Metallurgical Research & Technology.DOI
162. Tao Liu, Dengfu Chen, Wenjie He, Mujun Long, Lintao Gui, Huamei Duan, Junsheng Cao (2018). Study on the Formation and Control of TiN Inclusion in Mushy Zone for High Ti Microalloyed Steel. ˜The œminerals, metals & materials series.DOI
163. Huabiao Chen, Mujun Long, Wenjie He, Dengfu Chen, Huamei Duan, Yunwei Huang (2018). Manganese Influence on Equilibrium Partition Coefficient and Phase Transformation in Peritectic Steel. ˜The œminerals, metals & materials series.DOI
164. Wenxiang Jiang, Mujun Long, Dengfu Chen, Huamei Duan, Wenjie He, Sheng Yu, Yunwei Huang, Junsheng Cao (2018). Hot Ductility of X70 Pipeline Steel in Continuous Casting. ˜The œminerals, metals & materials series.DOI
165. Tao Liu, Mujun Long, Wenjie He, Dengfu Chen, Zhihua Dong, Xianguang Zhang, Huamei Duan (2018). Prediction model for austenite grains growth during reheating process in Ti micro-alloyed cast steel by coupling precipitates dissolution and coarsening behavior. Journal of Iron and Steel Research International.DOI
166. Bingzhi Ren, Dengfu Chen, Wentang Xia, Hongdan Wang, Zhiwei Han (2018). Numerical Simulation of Electromagnetic Field in Round Bloom Continuous Casting with Final Electromagnetic Stirring. Metals.DOI
167. Tao Liu, Mujun Long, Dengfu Chen, Huamei Duan, Lintao Gui, Sheng Yu, Junsheng Cao, Hua-biao Chen, Helin Fan (2018). Effect of coarse TiN inclusions and microstructure on impact toughness fluctuation in Ti micro-alloyed steel. Journal of Iron and Steel Research International.DOI
168. Helin Fan, Dengfu Chen, Tao Liu, Huamei Duan, Yunwei Huang, Mujun Long, Wenjie He (2018). Crystallization Behaviors of Anosovite and Silicate Crystals in High CaO and MgO Titanium Slag. Metals.DOI
169. Lintao Gui, Mujun Long, Yunwei Huang, Dengfu Chen, Huabiao Chen, Huamei Duan, Sheng Yu (2018). Effects of Inclusion Precipitation, Partition Coefficient, and Phase Transition on Microsegregation for High-Sulfur Steel Solidification. Metallurgical and Materials Transactions B.DOI
170. Zhihua Dong, Stephan Schönecker, Wei Li, Dengfu Chen, Levente Vitos (2018). Thermal spin fluctuations in CoCrFeMnNi high entropy alloy. Scientific Reports.DOI
171. Yunwei Huang, Mujun Long, Dengfu Chen, Huamei Duan, Kai Tan, Lintao Gui, Tao Liu (2018). A new wavelength selection criterion for two-color pyrometer interfered with participating media. Infrared Physics & Technology.DOI
172. Mujun Long, Tao Liu, Huabiao Chen, Dengfu Chen, Huamei Duan, Helin Fan, Kai Tan, Wenjie He (2018). Using differential scanning calorimetry to characterize the precipitation and dissolution of V(CN) and VC particles during continuous casting and reheating process. Journal of materials research/Pratt's guide to venture capital sources.DOI
173. Wenxiang Jiang, Mujun Long, Tao Liu, Dengfu Chen, Huabiao Chen, Junsheng Cao, Helin Fan, Sheng Yu, Huamei Duan (2018). Fluid Flow and Solidified Shell Remelting in F-EMS During Billet Continuous Casting. JOM.DOI
174. Lintao Gui, Mujun Long, Huabiao Chen, Dengfu Chen, Huamei Duan, Yunwei Huang, Tao Liu (2018). Effect of MnS precipitation on solute equilibrium partition coefficients in high sulfur steel during solidification. Journal of materials research/Pratt's guide to venture capital sources.DOI
175. Huabiao Chen, Mujun Long, Dengfu Chen, Tao Liu, Huamei Duan (2018). Numerical study on the characteristics of solute distribution and the formation of centerline segregation in continuous casting (CC) slab. International Journal of Heat and Mass Transfer.DOI
176. Yiwen Kong, Dengfu Chen, Qiang Liu, Huabiao Chen, Mujun Long (2018). Research on the On‐Line Simulation of a Three‐Dimensional Temperature Field Model of Slab Continuous Casting. steel research international.DOI
177. 吴俊平，靳星，龙木军，陈登福，刘涛，段华美（2017）. 含钛微合金钢低温冲击韧性波动的原因与改进. 《中国冶金》.
178. 刘鹏，陈登福，何文杰，龙木军，段华美，谭锴（2017）. Ni/Al2O3复合镀层中Al2O3微粒尺寸及热处理对镀层性能的影响. 《表面技术》.
179. 陈华标，龙木军，陈登福，桂林涛，马有光，段华美（2017）. 45钢凝固相变过程中溶质平衡分配系数的变化. 《钢铁研究学报》.
180. 白林，陈登福，刘鹏，龙木军，段华美，俞晟（2017）. 结晶器铜板表面耐磨纳米复合镀层的制备及性能. 《表面技术》.
181. 龙木军，陈登福，段华美（2017）. 冶金工程“卓越计划”校企联合工程实践教育的探讨. 《中国冶金教育》.DOI
182. Helin Fan, Mujun Long, Sheng Yu, Dengfu Chen, Tao Liu, Huamei Duan, Huabiao Chen (2017). Uniform Secondary Cooling Pattern for Minimizing Surface Reheating of the Strand During Round Bloom Continuous Casting. JOM.DOI
183. Zhihua Dong, Stephan Schönecker, Dengfu Chen, Wei Li, Mujun Long, Levente Vitos (2017). Elastic properties of paramagnetic austenitic steel at finite temperature: Longitudinal spin fluctuations in multicomponent alloys. Physical review. B./Physical review. B.DOI
184. Xin Liang Xie, Sheng Yu, Mujun Long, Dengfu Chen, Huamei Duan, Huabiao Chen, Helin Fan, Tao Liu (2017). Fluid flow and heat transfer behavior of liquid steel in slab mold with different corner structures. Part 1: Mathematical model and verification. Numerical Heat Transfer Part A Applications.DOI
185. Sheng Yu, Xin Liang Xie, Dengfu Chen, Huabiao Chen, Mujun Long, Huamei Duan, Wenxiang Jiang (2017). Fluid flow and heat transfer behavior of liquid steel in slab mold with different corner structures. Part 2: Fluid flow, heat transfer, and solidification characteristics. Numerical Heat Transfer Part A Applications.DOI
186. Lintao Gui, Mujun Long, Dengfu Chen, Yunwei Huang, Tao Liu, Huabiao Chen, Huamei Duan (2017). Modeling on solute enrichment and inclusion precipitation during the solidification process of high sulfur steel slab. Journal of materials research/Pratt's guide to venture capital sources.DOI
187. Yunwei Huang, Mujun Long, Peng Liu, Dengfu Chen, Huabiao Chen, Lintao Gui, Tao Liu, Sheng Yu (2017). Effects of Partition Coefficients, Diffusion Coefficients, and Solidification Paths on Microsegregation in Fe-Based Multinary Alloy. Metallurgical and Materials Transactions B.DOI
188. Huabiao Chen, Mujun Long, Junsheng Cao, Dengfu Chen, Tao Liu, Zhihua Dong (2017). Phase Transition of Peritectic Steel Q345 and Its Effect on the Equilibrium Partition Coefficients of Solutes. Metals.DOI
189. Tao Liu, Mujun Long, Wenxiang Jiang, Dengfu Chen, Sheng Yu, Huamei Duan, Junhao Sheng, Chunmei Chen (2017). Variations in the True Density and Sulfur Removal Forms of Petroleum Coke during an Ultrahigh-Temperature Desulfurization Process. Energy & Fuels.DOI
190. Helin Fan, Huamei Duan, Kai Tan, Yuankun Li, Dengfu Chen, Mujun Long, Tao Liu (2017). Production of Synthetic Rutile from Molten Titanium Slag with the Addition of B2O3. JOM.DOI
191. Zhihua Dong, Wei Li, Dengfu Chen, Stephan Schönecker, Mujun Long, Levente Vitos (2017). Longitudinal spin fluctuation contribution to thermal lattice expansion of paramagnetic Fe. Physical review. B./Physical review. B.DOI
192. 俞晟，陈登福，龙海军，龙木军，吕奎，谢鑫（2016）. 板坯结晶器钢液流动传热和摩擦行为的数值模拟. 《钢铁研究学报》.
193. 任兵芝，陈登福，王宏丹，漆锐（2016）. 大圆坯连铸结晶器电磁偏心搅拌的数值模拟. 《东北大学学报(自然科学版)》.
194. 姜文祥，陈登福，徐佩，龙木军，段华美（2016）. F-EMS作用下小方坯连铸钢液流动与传热的数值模拟. 《第十九届（2016年）全国炼钢学术会议》.
195. 侯自兵，文光华，唐萍，陈登福（2016）. 工科高年级研究型教学模式. 《中国冶金教育》.
196. Leilei Zhang, Dengfu Chen, Mujun Long, Huabiao Chen, Yunwei Huang, Zhihua Dong (2016). Study on the Fluid Flow in a Semi-Open-Stream-Poured Beam Blank Continuous Casting Mold with Submerged Refractory Funnels by Multiphase Modeling. Metals.DOI
197. Jialong Shen, Mujun Long, Dengfu Chen, Jian Zhang, Zhihua Dong (2016). Analysis on the dynamic extension for transverse surface cracks in the as-cast steel slab at high temperatures. Engineering Failure Analysis.DOI
198. Zhihua Dong, Dengfu Chen, Mujun Long, Wei Li, Huabiao Chen, Levente Vitos (2016). Computation of Phase Fractions in Austenite Transformation with the Dilation Curve for Various Cooling Regimens in Continuous Casting. Metallurgical and Materials Transactions B.DOI
199. 陈登福（2015）. 《冶金反应工程》专题序. 《重庆大学学报》.
200. 陈登福，吕奎，谢鑫，龙木军，俞晟（2015）. 板坯连铸结晶器内凝固坯壳的三维数值模拟. 《重庆大学学报》.
201. 龙木军，董志华，陈登福，张星，盛俊豪，陈春梅（2015）. 基于热膨胀法与相体积计算模型研究连铸坯冷却过程中奥氏体相变行为. 《工程科学学报》.
202. Zhihua Dong, Wei Li, Stephan Schönecker, Song Lu, Dengfu Chen, Levente Vitos (2015). Thermal spin fluctuation effect on the elastic constants of paramagnetic Fe from first principles. Physical Review B.DOI
203. Jian Zhang, Dengfu Chen, Chengqian Zhang, Shuigen Wang, Weng‐Sing Hwang (2015). Dynamic spray cooling control model based on the tracking of velocity and superheat for the continuous casting steel. Journal of Materials Processing Technology.DOI
204. Jian Zhang, Dengfu Chen, Chengqian Zhang, Weng‐Sing Hwang (2015). Study J and crack evolution behavior of as-cast steel at elevated temperatures. Engineering Failure Analysis.DOI
205. Jian Zhang, Dengfu Chen, Zhang Cheng-Qian, Weng‐Sing Hwang, Mingrong Han (2015). The effects of heating/cooling rate on the phase transformations and thermal expansion coefficient of C–Mn as-cast steel at elevated temperatures. Journal of materials research/Pratt's guide to venture capital sources.DOI
206. Zhengyi Jiang, Xingjian Gao, Shengli Li, Hongmei Zhang, Dengfu Chen, Jianzhong Xu (2015). Interface analysis and hot deformation behaviour of a novel laminated composite with high-Cr cast iron and low carbon steel prepared by hot compression bonding. Journal of Iron and Steel Research International.DOI
207. Yan Zhao, Rongshan S. Qin, Dengfu Chen, Xinming Wan, Yang Li, Mingtu Ma (2015). A Three Dimensional Cellular Automata Model for Dendrite Growth in Non-Equilibrium Solidification of Binary Alloy. steel research international.DOI
208. Zhihua Dong, Wei Li, Mujun Long, Lintao Gui, Dengfu Chen, Yunwei Huang, Levente Vitos (2015). Effect of Temperature Reversion on Hot Ductility and Flow Stress–Strain Curves of C-Mn Continuously Cast Steels. Metallurgical and Materials Transactions B.DOI
209. Jian Zhang, Dengfu Chen, Chengqian Zhang, Shui-Gen Wang, Weng‐Sing Hwang, Mingrong Han (2015). Effects of an even secondary cooling mode on the temperature and stress fields of round billet continuous casting steel. Journal of Materials Processing Technology.DOI
210. Mujun Long, Junhao Sheng, Tao Liu, Dengfu Chen, Yi Yang, Shikai Gong, Chunmei Chen (2015). Thermo‐Physical Properties of Petroleum Coke during Calcining Graphitization Process.DOI
211. Bingzhi Ren, Dengfu Chen, Hongdan Wang, Mujun Long (2015). Numerical Analysis of Coupled Turbulent Flow and Macroscopic Solidification in a Round Bloom Continuous Casting Mold with Electromagnetic Stirring. steel research international.DOI
212. Yan Zhao, Dengfu Chen, Mingtu Ma, Xinming Wan, Yang Li, Rongshan S. Qin (2015). A Cellular Automaton Model Coupled with Finite Element Method for Solidification Process of Beam Blank Continuous Casting.DOI
213. 陈春梅，陈登福，董志华，龙木军，申嘉龙，徐松（2014）. 16MnNb钢圆坯连铸二冷制度的研究. 《钢铁》.
214. 黎建全，陈登福，吴国荣，雷阳伟（2014）. 37Mn2钢连铸圆坯的二次冷却制度. 《钢铁》.
215. 谢鑫，陈登福，吕奎，龙木军，俞晟（2014）. 不同拉速下结晶器水缝传热的数值模拟研究. 《第十八届（2014年）全国炼钢学术会议论文集——S06：凝固与连铸》.
216. 龙木军，陈登福，文光华（2014）. 冶金工程本科专业课程教学方法的探索与实践. 《高等建筑教育》.
217. Liming Zhao, Qi Ouyang, Dengfu Chen, Jayaram K. Udupa, Huiqian Wang, Yuebin Zeng (2014). Defect detection in slab surface: A novel dual charge-coupled device imaging-based fuzzy connectedness strategy. Review of Scientific Instruments.DOI
218. Xin Liang Xie, Dengfu Chen, H. C. De Long, Mujun Long, Kui Lv (2014). Mathematical Modeling of Heat Transfer in Mold Copper Coupled with Cooling Water During the Slab Continuous Casting Process. Metallurgical and Materials Transactions B.DOI
219. Xingjian Gao, Zhengyi Jiang, Dongbin Wei, Sihai Jiao, Dengfu Chen, Jianzhong Xu, Xiaoming Zhang, Dianyao Gong (2014). Effects of temperature and strain rate on microstructure and mechanical properties of high chromium cast iron/low carbon steel bimetal prepared by hot diffusion-compression bonding. Materials & Design (1980-2015).DOI
220. Mujun Long, Zhihua Dong, Junhao Sheng, Dengfu Chen, Chunmei Chen (2014). Universal Secondary Cooling Structure for Round Blooms Continuous Casting of Steels in Various Diameters. steel research international.DOI
221. 龙木军，董志华，陈登福，张星，盛俊豪，陈春梅（2013）. 连铸坯固态相变中奥氏体溶解行为研究. 《第十七届（2013年）全国冶金反应工程学学术会议论文集（上册）》.
222. 张星，陈登福，董志华，龙木军，马有光，徐松（2013）. P510L钢连铸坯高温力学性能. 《中国科技论文》.
223. 董志华，陈登福，龙木军，张星，申嘉龙（2013）. 20CrMnTi钢连铸坯柱状晶区的高温力学性能. 《材料研究学报》.
224. 龙木军，陈登福，黄云伟，张健（2013）. 基于铸坯温度在线测量的连铸二冷动态模型研究. 《2013连铸装备技术的科技进步与精细化学术研讨会》.
225. 黎建全，何博，陈登福，杨文中（2013）. 方坯连铸机二冷系统结构设计. 《重型机械》.
226. 范鹤林，陈登福，徐松，龙木军，龙海军（2013）. 高钙钒比钒渣钠化焙烧熟料浸出条件研究. 《过程工程学报》.
227. 陈登福，赵岩，刘强，申嘉龙，马有光（2013）. H型坯连铸二次冷却及通用软件开发. 《第十七届（2013年）全国炼钢学术会议论文集（A卷）》.
228. 范鹤林，陈登福，徐松，龙木军，龙海军（2013）. 高钙钒比钒渣钠化焙烧熟料浸出条件的研究. 《第十七届（2013年）全国冶金反应工程学学术会议论文集（上册）》.
229. Xuanbo Gao, Zhengyi Jiang, D.B. Wei, Huijun Li, Sihai Jiao, Jianzhong Xu, X.M. Zhang, Jing Tao Han, Dengfu Chen (2013). Constitutive analysis for hot deformation behaviour of novel bimetal consisting of pearlitic steel and low carbon steel. Materials Science and Engineering A.DOI
230. Yan Zhao, Dengfu Chen, Mujun Long, Tansel T. Arif, Rongshan S. Qin (2013). A Three-Dimensional Cellular Automata Model for Dendrite Growth with Various Crystallographic Orientations During Solidification. Metallurgical and Materials Transactions B.DOI
231. Dengfu Chen, Xin Liang Xie, Mujun Long, Min Zhang, Leilei Zhang, Qi Liao (2013). Hydraulics and Mathematics Simulation on the Weir and Gas Curtain in Tundish of Ultrathick Slab Continuous Casting. Metallurgical and Materials Transactions B.DOI
232. Mujun Long, Zhihua Dong, Dengfu Chen, Qi Liao, Youguang Ma (2013). Effect of uneven solidification on the quality of continuous casting slab. International Journal of Materials and Product Technology.DOI
233. 徐松，龙木军，陈登福，张健（2012）. 基于方坯连铸凝固末端电磁搅拌的二次冷却的研究. 《2012年全国冶金物理化学学术会议》.
234. 彭政，温良英，杨中平，陈登福（2012）. 中间包传热边界对钢液流动及传热计算的影响. 《连铸》.
235. Xing Jin, Dengfu Chen, Xin Liang Xie, Jialong Shen, Mujun Long (2012). Investigation on Water Model for Fluid Flow in Slab Continuous Casting Mold With Consideration of Solidified Process. steel research international.DOI
236. Dengfu Chen (2012). Effects of Thermal Boundary Conditions on Numerical Simulation of Molten Steel in Tundish. Continuous Casting.
237. 靳星，陈登福，龙木军，张健，陈嫚丽（2011）. 连铸二冷区喷嘴布置方式优化方法. 《重庆大学学报》.
238. 胡辉，董志华，陈登福，杨兴磊，王冠，周振宇（2011）. 热回复过程高强耐候钢Q450NQR1的高温力学性能. 《特殊钢》.
239. 陈登福，宋立伟，董志华，高兴建，王水根（2011）. 冷却速率对耐候钢高温力学性能的影响. 《重庆大学学报》.
240. 陈登福，宋立伟，王启明，陈缦丽（2011）. 连铸坯凝固晶粒生长的元胞自动机模型. 《重庆大学学报》.
241. 韩志伟，陈登福（2011）. 连铸坯坯壳厚度的射钉测试及凝固系数的修正. 《重庆大学学报》.
242. 刘强，陈登福，赵岩，董志华，申嘉龙（2011）. 异型坯连铸二次冷却通用仿真软件的开发. 《第八届（2011）中国钢铁年会论文集》.
243. 欧阳奇，赵立明，温良英，陈登福，张健（2011）. 连铸热坯表面温度可见光谱CCD辐射测温方法. 《重庆大学学报》.
244. 龙木军，陈登福，赵岩，刘强（2011）. 基于改善连铸板坯中心偏析的传热仿真软件. 《连铸》.
245. Yan Zhao, Dengfu Chen, Yanyan Bi, Mujun Long (2011). Preparation of low cost glass–ceramics from molten blast furnace slag. Ceramics International.DOI
246. Mujun Long, Dengfu Chen (2011). Study on Mitigating Center Macro‐Segregation During Steel Continuous Casting Process. steel research international.DOI
247. Xianguang Zhang, Dengfu Chen, Lifeng Zhang, Jian Zhang, Shuigen Wang, Yan Zhao (2011). Special Package for Analysis of Thermo-Mechanical Behavior of Steel Shell in Secondary Cooling Zone of Continuously Cast Round Billets. Communications in computer and information science.DOI
248. Dengfu Chen (2011). Nail-shooting measurement of solidified shell thickness and solidification coefficient revision. Journal of Chongqing University. English Edition.
249. 陈登福，张献光，张立峰，靳星，温良英，张大江（2010）. 板坯连铸结晶器内氩气泡行为的模拟研究. 《钢铁》.
250. 王翠娜，温良英，陈登福，张大江，彭政，靳星（2010）. SEN底部形状对结晶器内钢液流场和温度场的影响. 《钢铁》.
251. 宋立伟，陈登福，高兴健，刘强，王水根，张夫恩（2010）. 耐硫酸露点腐蚀钢JNS高温力学性能研究. 《2010年全国冶金物理化学学术会议专辑(上册)》.
252. 王水根，陈登福，张健，龙木军，张夫恩，宋立伟（2010）. 圆坯连铸二次冷却计算机通用仿真软件的开发. 《第十六届全国炼钢学术会议》.
253. 李军成，温良英，陈登福，张建，郭锐（2010）. 210t双联复吹转炉水模实验研究. 《过程工程学报》.
254. 张献光，陈登福，张立峰，靳星，张健，温良英，张大江，王翠娜，毕艳艳（2010）. 吹氩对板坯连铸结晶器流体流动的影响. 《过程工程学报》.
255. 王翠娜，温良英，陈登福，张大江，彭政，钟泓（2010）. 板坯连铸结晶器内夹杂物运动行为的数值模拟. 《过程工程学报》.
256. 陈登福，张大江，王翠娜，靳星，张健（2010）. 板坯连铸结晶器内液面波动数值模拟. 《过程工程学报》.
257. 张健，陈登福，王水根，张夫恩（2010）. 连铸坯表面温度和凝固终点动态控制研究. 《第十六届全国炼钢学术会议论文集》.
258. 王水根，陈登福，张健，张献光，张夫恩，宋立伟（2010）. 圆坯连铸凝固传热数学模型的研究. 《2010年全国冶金物理化学学术会议专辑(上册)》.
259. 黎建全，杨素波，高兴健，陈登福，宋立伟，毕艳艳（2010）. Q450NQR1高强度耐候钢连铸板坯的高温性能. 《特殊钢》.
260. 张大江，陈登福，王翠娜，靳星，谢鑫（2010）. 不同宽度板坯结晶器内流场的水模型和数值模拟研究. 《特殊钢》.
261. Jian Zhang, Dengfu Chen, Shuigen Wang, Mujun Long (2010). Compensation Control Model of Superheat and Cooling Water Temperature for Secondary Cooling of Continuous Casting. steel research international.DOI
262. Han Zhi-wei, Dengfu Chen, Ke Feng, Mujun Long (2010). Development and Application of Dynamic Soft-reduction Control Model to Slab Continuous Casting Process. ISIJ International.DOI
263. 冯科，韩志伟，王勇，毛敬华，陈登福，黄丽（2009）. 连铸板坯高温力学性能参数的试验研究. 《铸造技术》.
264. 陈登福，高兴健，王启明，王水根，宋立伟（2009）. Q235G钢连铸坯的高温力学性能分析. 《过程工程学报》.
265. 龙木军，陈登福，张健，欧阳奇，王启明，王水根，宋立伟，刘洪波，高龙永，牛宏波（2009）. 板坯连铸矫直温度在线控制的应用研究. 《过程工程学报》.
266. 张大江，陈登福，徐楚韶，张竹明，罗明发，叶亚雄，郑福生，张洪彪（2009）. 低品位铁矿石煤基回转窑直接还原研究. 《过程工程学报》.
267. 张洪彪，董凌燕，陈登福，郑福生，孙善长（2009）. 高磷铁水脱磷的热力学分析及实验研究. 《过程工程学报》.
268. 李士琦，曲英，张建良，魏季和，朱苗勇，陈登福，张胤，张延玲，张捷宇（2009）. 冶金反应工程分学科发展. 《2008-2009冶金工程技术学科发展报告》.
269. Xing Jin, Dengfu Chen, Yan Jun Zhao, Mujun Long (2009). Study on Mathematical Model of Temperature and Stress for Thin Slab in Continuous Casting.DOI
270. Wenjuan Niu, Chenguang Bai, Guibao Qiu, Qiang Wang, Liangying Wen, Dengfu Chen, Lingyan Dong (2009). Preparation and characterization of porous titanium using space‐holder technique. Rare Metals.DOI
271. 王启明，陈登福，高兴健，高文星，黄丽（2008）. Q345连铸坯热物理性能和高温力学性能研究. 《2008年全国冶金物理化学学术会议专辑（下册）》.
272. 温良英，张健，陈登福，董凌燕（2008）. 低合金高强度钢连铸二冷制度优化及试验. 《重庆大学学报》.
273. 陈文满，陈登福，黄丽，廖明（2008）. 热轧硅钢高温力学性能研究. 《材料导报》.
274. 高文星，董凌燕，陈登福，温良英（2008）. 煤基直接还原及转底炉工艺的发展现状. 《矿冶》.
275. 张健，温良英，陈登福，朱开军（2007）. 邯钢三炼钢板坯连铸漏钢实践探讨. 《2007中国钢铁年会论文集》.
276. 陈登福，李宏亮，牛宏波，刘清才，董慧，邱贵宝，刘洪波（2007）. 方坯连铸二次冷却配水新模型. 《重庆大学学报》.
277. 欧阳奇，张兴兰，陈登福，张涛，肖建平（2007）. 高温连铸坯表面缺陷的机器视觉无损检测. 《重庆大学学报》.
278. Chenguang Bai, Wei Ren, Guibao Qiu, Meilong Hu, Dengfu Chen, Liangying Wen (2007). The Review of Microwave Applications in Metallurgical Process in China. ISIJ International.DOI
279. Liangying Wen, Chenguang Bai, Shengfu Zhang, Guibao Qiu, Dengfu Chen (2007). Effect of Microwave Treating the Blast Furnace Slag Bearing Titanium on Thermal Action. ISIJ International.DOI
280. 陈登福 (2007). Secondary cooling technology for high-efficiency continuous billet-casting. Journal of Chongqing University(English Edition).
281. 周远华，温良英，李斌，陈登福（2006）. 底吹喷枪异常堵塞时复吹转炉的熔池搅拌. 《钢铁研究学报》.
282. 温良英，陈登福，董凌燕，白晨光，周远华，廖明，章金楠（2006）. 复吹转炉不同冶炼时期熔池行为的水模拟研究. 《钢铁研究学报》.
283. 梁栋，白晨光，邱贵宝，温良英，陈登福，董凌燕（2006）. 高炉炉况的智能化判断方法. 《钢铁研究学报》.
284. 温良英，周远华，陈登福，白晨光，董凌燕，张生富（2006）. 复吹转炉熔池内流体流动的数值模拟. 《重庆大学学报》.
285. 温良英，白晨光，陈登福，董凌燕，张正荣（2006）. 高效蓄热室的传热数值模拟及实验分析. 《重庆大学学报》.
286. 潘艳华，陈登福，董凌燕，温良英（2006）. 20CrMo连铸坯高温力学性能和热物理性能分析. 《重庆大学学报》.
287. 聂新苗，董凌燕，白晨光，陈登福，邱贵宝（2006）. TiO2电解制取Ti的热力学研究. 《材料导报》.
288. 陈登福，潘艳华，龙木军（2006）. 二次冷却通用仿真软件在方坯连铸中的应用. 《铸造》.
289. Xin-miao NIE, Dong Ling-yan, Chenguang Bai, Dengfu Chen, Guibao Qiu (2006). Preparation of Ti by direct electrochemical reduction of solid TiO2 and its reaction mechanism. Transactions of Nonferrous Metals Society of China.DOI
290. Liangying Wen, Chenguang Bai, Yangqi Ou, Dengfu Chen, Guibao Qiu (2006). Radiant Image Simulation of Pulverized Coal Combustion in Blast Furnace Raceway. Journal of Iron and Steel Research International.DOI
291. Shengfu Zhang, Liangying Wen, Chenguang Bai, Dengfu Chen, Qi Ouyang (2006). The Temperature Field Digitization of Radiation Images in Blast Furnace Raceway. ISIJ International.DOI
292. Dengfu Chen (2006). Molten Bath Stirring of Composite Blown Converter for Abnormal Blocking of Bottom Blowing Ejection Gun. Gangtie yanjiu xuebao.
293. 温良英，白晨光，欧阳奇，陈登福，董凌燕，邱贵宝（2005）. 高炉风口回旋区工作状态监控技术的研究现状. 《重庆大学学报》.
294. 张生富，温良英，白晨光，陈登福，董凌燕，欧阳奇（2005）. 高炉风口煤粉及回旋区焦炭燃烧过程数学模型. 《重庆大学学报》.
295. 毛红霞，白晨光，邱贵宝，陈登福，温良英，董凌燕（2005）. 非牛顿冶金熔渣流变特性的研究进展. 《重庆大学学报》.
296. 陈登福，汪传均，董凌燕，白晨光，刘清才（2005）. 二元相图中稳定化合物活度的计算方法. 《重庆大学学报》.
297. 冯科，陈登福，徐楚韶，董凌燕，刘清才（2004）. 二元合金凝固微观模型的研究现状. 《重庆大学学报》.
298. 陈登福，孙海峰，冯科，白晨光，董凌燕，温良英，赵战锋（2004）. ROKOP高效方坯连铸二冷动态控制算法模型. 《重庆大学学报》.
299. 董凌燕，陈登福，白晨光，汪传均（2004）. Al2O3-CaO-SiO2系截面图的计算与验证. 《重庆大学学报》.
300. 陈登福，孙明月，冯科，赵战锋，董凌燕，温良英，潘艳华（2004）. 方坯连铸二次冷却数值仿真商用软件. 《重庆大学学报》.
301. Dengfu Chen (2004). The 3D Numerical Simulation of Conjugated Fluid Flow and Heat Transfer of Billet Continuous Casting. Acta Simulata Systematica Sinica.
302. 周远华，冉广秀，陈登福，温良英（2003）. 低合金钢中厚板探伤缺陷的原因分析与探讨. 《中国金属学会2003中国钢铁年会论文集（4）》.
303. 许原，潘元，刘清才，陈登福，白晨光，刘彻宇，徐楚韶（2003）. 含钛熔渣与镁碳质耐火材料的作用机理. 《重庆大学学报》.
304. 许原，白晨光，陈登福，邱贵宝，温良英（2003）. 海绵钛生产工艺研究进展. 《重庆大学学报》.
305. 温良英，白晨光，陈登福，董凌燕，邱贵宝，欧阳奇（2003）. 回旋区煤粉燃烧过程与辐射图像的关联性. 《重庆大学学报》.
306. 陈登福，孙海峰，冯科，徐楚韶，王思中，吴文东，余兴元，黄顺中，黄仲清，何运顺（2002）. 威钢1号ROKOP小方坯连铸的二冷制度分析. 《重庆金属学会钢铁年会学术论文专辑》.
307. 贾娟鱼，白晨光，邱贵宝，陈登福，范志刚（2002）. 含TiO2三元渣系粘度计算模型. 《重庆大学学报》.
308. 许原，刘清才，陈登福，白晨光，邹德余（2002）. 镁碳砖和铝碳砖在高钛渣中的侵蚀. 《钢铁钒钛》.
309. 邹德余，何生平，伍成波，陈登福，周南夫（2001）. 高炉用温差自力式调节阀的特性. 《重庆大学学报》.
310. 陈登福，白晨光（2001）. 我国钢铁工业的清洁生产和二次资源的综合利用. 《钢铁》.
311. 陈登福，刘人达，颜广庭（2001）. 连铸薄板坯的二维热弹塑性蠕变应力模型. 《重庆大学学报》.
312. 陈登福，颜广庭（1991）. 不锈钢(1Cr18Ni9Ti)方坯连铸二冷传热的计算机模拟和工艺过程的优化. 《四川冶金》.
313. 颜广庭，陈登福（1990）. 55SiMnVB钢方坯连铸二冷区凝固的最佳工艺制度控制模型. 《钢铁研究学报》.

书籍章节

1. Haohao Zhang, Jialu Wu, Wei Guo, Songyuan Ai, Mujun Long, Dengfu Chen, Huamei Duan (2022). Grain Precipitation and Growth Model of TiN Inclusions in 22MnB5 Steel. ˜The œminerals, metals & materials series.DOI
2. Yizhe Du, Songyuan Ai, Yanhong Fang, Mujun Long, Dengfu Chen (2022). Study on Stress–Strain and Deformation Behavior of Bloom in the Heavy Reduction Process Under Single Roll. ˜The œminerals, metals & materials series.DOI
3. Hao Hu, Xiangyang Wang, Chenghui Wu, Xin Liang Xie, Mujun Long, Dengfu Chen, Xiaodong Yang, Shuang Liu, Huamei Duan (2022). Evolution of Physicochemical Properties of Tundish Covering Flux in Continuous Casting Process. ˜The œminerals, metals & materials series.DOI
4. Chengrui Wang, Yanhong Fang, Guangfen Liang, Huamei Duan, Dengfu Chen, Mujun Long (2022). Synthesis and Characterization of Cu-Ni Bimetallic Catalysts Support on GO, rGO, and NGO. ˜The œminerals, metals & materials series.DOI
5. Songyuan Ai, Chenxi Yang, Mujun Long, Haohao Zhang, Dengfu Chen, Huamei Duan (2022). Effect of Electron Spin Fluctuation on the Magnetism and Elastic Properties of the Slab Matrix Phase. ˜The œminerals, metals & materials series.DOI
6. Xiangyong Lv, Guangfen Liang, Yandong Li, Huamei Duan, Dengfu Chen, Mujun Long (2020). Properties and Microstructure of Copper and/or Nickel Supported on GO, rGO, and NGO. ˜The œminerals, metals & materials series.DOI
7. Peilong Xu, Dengfu Chen, Peng Liu, Qinzheng Wang, Mujun Long, Huamei Duan, Jie Yang, Qimin Wang (2020). Investigation on the Flow Field of Molten Steel in Ultrahigh-Speed Billet Continuous Casting Mold. ˜The œminerals, metals & materials series.DOI
8. Shuang Liu, Mujun Long, Peilong Xu, Pingmei Tang, Dengfu Chen, Huamei Duan (2020). Numerical Simulation of Heat Transfer Between Roller and Slab During Medium Thickness Slab Continuous Casting. ˜The œminerals, metals & materials series.DOI
9. Guangfen Liang, Xiangyong Lv, Yandong Li, Huamei Duan, Dengfu Chen, Mujun Long, Song Xu (2020). Separation of Vanadium from Iron in Vanadium-Rich Molten Iron. ˜The œminerals, metals & materials series.DOI
10. Peng Liu, Dengfu Chen, Peilong Xu, Mujun Long, Huamei Duan, Jie Yang (2020). Site Preference of the Alloying Additions on Mechanical Properties of L12 Ni3Co Alloys. ˜The œminerals, metals & materials series.DOI
11. Tao Liu, Dengfu Chen, Songyuan Ai, Pingmei Tang, Mujun Long, Jie Yang (2020). In Situ Observation of the Peritectic Reaction and Transformation in a Commercial HSLA Steel. ˜The œminerals, metals & materials series.DOI
12. Peilong Xu, Dengfu Chen, Shixin Wu, Hengsong Yu, Mujun Long, Sheng Yu, Huamei Duan (2019). Optimization of the Flow Behavior of Molten Steel in Ultrahigh-Speed Billet Continuous Casting Mold. ˜The œminerals, metals & materials series.DOI
13. Sheng Yu, Dengfu Chen, Peilong Xu, Mujun Long, Kui Lv, Huamei Duan (2017). Genetic Influence of Mold Corner Structure on the Strand Corner Temperature in Secondary Cooling Zone During Slab Continuous Casting. ˜The œminerals, metals & materials series.DOI
14. Yunwei Huang, Dengfu Chen, Lin Ling Bai, Mujun Long, Kui Lv, Pei Xu (2016). Study on the Infrared Spectral Range for Radiation Temperature Measurement of Continuous Casting Slab. Springer eBooks.DOI
15. Huabiao Chen, Dengfu Chen, Lintao Gui, Mujun Long, Yunwei Huang, Youguang Ma (2015). Numerical Simulation of the Coupled Turbulent Flow, Heat and Solute Transport in the Turbulent Flow Region of Slab Continuous Casting. Springer eBooks.DOI
16. Song Xu, Mujun Long, Dengfu Chen, Helin Fan, Yuting Chen, Xue Sun (2014). Recovery of Vanadium from a High Ca/V Ratio Vanadium Slag Using Sodium Roasting and Ammonia Leaching. Springer eBooks.DOI
17. Xin Liang Xie, Dengfu Chen, Mujun Long, Leilei Zhang, Jialong Shen, Youguang Ma (2013). Numerical Analysis of Coupled Fluid Flow, Heat Transfer and Solidification in Ultra-thick Slab Continuous Casting Mold. Springer eBooks.DOI
18. Zhihua Dong, Dengfu Chen, Xing Zhang, Mujun Long (2013). Effect of Thermal History on the Hot Ductility and Fracture Mechanisms of Low Carbon Peritectic Steel. Springer eBooks.DOI