百晓学者学者目录

宋迎东

南京航空航天大学能源与动力学院

个人简介

宋迎东,南京航空航天大学能源与动力学院教授、博士生导师,长期从事航空发动机结构强度振动与可靠性、陶瓷基复合材料结构强度、载荷谱与结构寿命试验评定等科研工作。

精选作品

期刊论文

  1. 王大伟,贾旭,侯廷红,江荣,宋迎东(2026). 电子束焊修复TC4钛合金风扇叶片抗外物冲击试验. 《航空发动机》.
  2. 张禄,沈翔宇,刘喆,杨雨晨,冉茂菁,刘持栋,郭亚静,高希光,宋迎东(2026). 高温及氧化作用对陶瓷基复合材料循环变形失效机制影响规律. 《复合材料学报》.DOI
  3. 刘航佚,曹恒,贾旭,陈家运,宋迎东(2026). 航发复材风扇机匣高温下包容性能的研究进展. 《南京航空航天大学学报(自然科学版)》.
  4. Changyu Miao, Zhigang Sun, Lei Pan, Hanmin Xiao, Xuming Niu, Yingdong Song (2026). High strain rate mechanical behavior of Ti-6Al-4V alloy under tensile loading. Materials Today Communications.DOI
  5. Junjie Li, Rong Jiang, Mingliang Li, Leicheng Zhang, Yingdong Song (2026). Effect of hot corrosion on strain localization and low‑cycle fatigue behavior of a PM Ni‑based superalloy. International Journal of Fatigue.DOI
  6. Feilong Jia, Qiang Miao, Wenping Liang, Wei Wei, Junqin Shi, Yingdong Song, Xiaoma Tao (2026). Microstructural evolution and tribological mechanisms of (HfTaZrTi)C multi-component ceramic coatings under wide temperature range. Tribology International.DOI
  7. Zhanghui Li, Rong Jiang, Yang Zhao, Yixuan Jin, Qiang Liu, Yingdong Song (2026). Dwell thermo-mechanical fatigue life prediction of an advanced turbine disk alloy considering the influence of oxidation damage. International Journal of Solids and Structures.DOI
  8. Le Lu, Zhiyuan Ma, Zhaofeng Chen, Lixia Yang, Yue Wang, Yaotong Song, Yingdong Song, Yingdong Song, Yingdong Song, Xiguang Gao (2026). In Situ SiC Nanowire Bridging Enables Structural Reconstruction of Macropore Defects in CMC. Journal of the American Ceramic Society.DOI
  9. Lei Pan, Xuming Niu, Zhigang Sun, Hanmin Xiao, Yingdong Song (2026). Statistical micromechanical analysis of microstructural and constituent uncertainty effects on the effective elastic properties of SiC/Ti composites. Composite Structures.DOI
  10. Han Xiao, Zikai Zhou, Zhikang Zheng, Chao You, Xihui Chen, Gao Xiguang, Yingdong Song (2026). Machine Learning-Based Identification of Interfacial Shear Stress under High-Temperature Fatigue Using Multiple Hysteresis Loop Features. Applied Composite Materials.DOI
  11. Lixia Yang, Guoqiang Wen, Zhaofeng Chen, Pengze Yang, Lijun Xiong, Kai Liu, Xiguang Gao, Yingdong Song (2026). High mechanical properties selective laser sintering SiC ceramic via in-situ growth of ultra-long SiC whisker by a novel carbothermal reduction method. Composites Part A Applied Science and Manufacturing.DOI
  12. Zheng Ni, Guoqiang Yu, S. S. Zhou, Wenbing Ma, Beichen Xue, Jiaming Li, Xiguang Gao, Yingdong Song (2026). Prediction of high-temperature mechanical behavior for CMCs structure based on real-time damage-resistance data mapping. NDT & E International.DOI
  13. Tao Wu, Yukang Wang, Zhikang Zheng, Huajun Zhang, Liyan Zhang, Xiguang Gao, Fang Wang, Yingdong Song, Mingzhuo Zhao, Ruimeng Yang, Tianshan Li (2026). Numerical and experimental study of the dynamic response of ceramic matrix composites under high-temperature and oxygen-free environment. Advances in Applied Ceramics Structural Functional and Bioceramics.DOI
  14. Mengjia Wang, Qingping Sun, Xianbin Xia, Jingying Li, Yixin Guo, Linjun Zhang, Yingdong Song (2026). Virtual micro-CT reveals 3D damage synergy in multiphase aluminum alloys. Journal of Alloys and Compounds.DOI
  15. Tao Wu, Yukang Wang, Wenxuan Qi, Xingling Luo, Peng Luo, Xiguang Gao, Yingdong Song (2026). Predictive Constitutive Modelling of Oxidation-Induced Degradation in 2.5D Woven C/SiC Composites. Materials.DOI
  16. 宋迎东(2025). 陶瓷基复合材料结构强度试验原理与技术. 《科学出版社》.
  17. 刘明琦,张盛,侯佳文,高希光,宋迎东(2025). 变厚度复合材料构件的预制体建模方法. 《纤维复合材料》.
  18. 袁思思,牛序铭,孙志刚,宋迎东(2025). 考虑性能退化的载荷谱修正方法. 《航空学报》.
  19. 陈易诚,邓杨芳,王红彬,于国强,高希光,宋迎东(2025). 环境温度对二维编织SiC/SiC复合材料拉-拉疲劳性能的影响. 《材料科学与工程学报》.DOI
  20. 张禄,宦婷,葛海浪,杨雨晨,贾冰岳,刘伟,焦健,高希光,宋迎东(2025). 2.5维编织陶瓷基复合材料高温疲劳极限研究. 《推进技术》.
  21. 刘晗霄,尤超,吴奇宇,高希光,宋迎东(2025). 考虑热-力耦合影响的陶瓷基复合材料涡轮导向叶片热应力分析. 《推进技术》.
  22. 秦豪,刘强,江荣,宋迎东,张强,刘建涛,邓健,卢天健(2025). 高温条件下FGH4108合金的保载-疲劳裂纹扩展行为. 《航空学报》.
  23. 冉茂菁,张禄,高希光,宋迎东(2025). 陶瓷基复合材料在先进发动机中的振动稳定性与颤振分析研究进展(英文). Transactions of Nanjing University of Aeronautics and Astronautics.DOI
  24. 江荣,刘宜龙,张磊成,聂金凤,刘建涛,张义文,宋迎东(2025). Ta对新型镍基粉末高温合金组织及低周疲劳性能的影响. 《推进技术》.DOI
  25. 李明亮,贾旭,凌晨,于连旭,于苏洋,江荣,宋迎东(2025). 热腐蚀对K444合金高周疲劳的影响研究. 《南京航空航天大学学报(自然科学版)》.
  26. 金易璇,江荣,李张辉,张强,刘建涛,宋迎东(2025). 温度对第四代粉末高温合金低周疲劳变形行为的影响. 《南京航空航天大学学报(自然科学版)》.DOI
  27. 于国强,韩思远,高希光,宋迎东(2025). 电阻抗层析成像在航空航天结构健康监测领域的应用及发展展望. 《航空学报》.
  28. 陈亮,孟琳书,张音旋,王广帅,曹奇凯,赵铭卓,吴涛,高希光,宋迎东(2025). 高温环境下2.5D针刺C/SiC复合材料失效机理及多尺度失效分析方法研究. 《陶瓷学报》.DOI
  29. 王通,张盛,高希光,宋迎东(2025). 拉伸载荷下针刺C/SiC螺栓连接失效模式的细观力学模拟. 《东华大学学报(自然科学版)》.DOI
  30. 程义,尤超,樊玉辉,罗思海,江荣,宋迎东(2025). 激光冲击诱导加工硬化对叶片抗外物损伤的影响. 《海军航空大学学报》.
  31. 宋迎东(2025). 构建“四链协同”的产教融合卓越工程人才培养体系. 《中国高等教育》.
  32. 于国强,隋正卿,陈正扬,倪政,杜金康,高希光,宋迎东(2025). 类椭圆形CMC火焰筒多斜孔冷却性能数值分析. 《航空动力学报》.DOI
  33. 陈强,张盛,冯雨春,高希光,宋迎东(2025). 考虑分层损伤的平纹编织SiC/SiC带孔板-金属销钉连接结构失效分析. 《航空动力学报》.DOI
  34. Yixin Chen, Shaohua Chen, Shiyao Li, Chao You, Tao Wu, Fang Wang, Nuo Xu, Xiguang Gao, Yingdong Song (2025). High-Precision Constitutive Modeling of CMC Interphase Under Thermo-Chemo-Mechanical Conditions Based on Molecular Simulation and Machine Learning. Applied Composite Materials.DOI
  35. Lu Zhang, Yuchen Yang, Hailang Ge, Ting Huan, Xiangyu Shen, Fang Wang, Xiguang Gao, Yingdong Song (2025). In-situ 3D deformation and damage evolution of C/SiC composites under high-temperature tensile loading: μCT and digital volume correlation analysis. Journal of the European Ceramic Society.DOI
  36. Guoqiang Yu, Shihao Zhou, Wenbing Ma, Beichen Xue, Zheng Ni, Lulu Chang, Hong Chen, Xiguang Gao, Yingdong Song (2025). Mechanical behavior and damage evolution of SiC/SiC composites induced by wear damage. Journal of Materials Research and Technology.DOI
  37. Ye Jin, Rong Jiang, Z.H. Li, Z. J. Sun, Xiaoxiang Wu, Qiang Zhang, J.T. Liu, Yingdong Song (2025). Effects of long-term aging at 800 °C on the microstructure stability and low cycle fatigue behavior of a new powder metallurgy Ni-based superalloy. Journal of Alloys and Compounds.DOI
  38. Xuming Niu, Weicheng Zeng, Chenchen Wang, Zhigang Sun, Yingdong Song (2025). A Multiaxial Creep Life Model and Validation Based on the Skeletal Point Stress Method. Metallurgical and Materials Transactions A.DOI
  39. Yuhui Fan, Chao You, Sihai Luo, Yi Pik Cheng, Daiyang Gao, Rong Jiang, Yingdong Song (2025). An Eigenstrain-Based Full-Field Residual Stress Reconstruction Method Applied for Laser Shock Peened Titanium Alloy Blades. Journal of Materials Engineering and Performance.DOI
  40. Ranxin Wang, Rong Jiang, Jingpeng Zhang, Sihai Luo, Chao You, Yingdong Song (2025). Simulation of residual stress relaxation and fatigue life prediction of laser shock peened FGH4098 nickel-based alloy. Journal of Mechanical Science and Technology.DOI
  41. Tao Wu, ZiXuan Tang, Ruimeng Yang, Zhikang Zheng, Mifeng Zhao, Xiguang Gao, Yingdong Song (2025). A Constitutive Modeling Study of Loading and Unloading of 2.5D Woven CMCS Considering the Effect of Temperature. Mechanics of Composite Materials.DOI
  42. Chao You, Yaoting Cai, Weilong Wu, Huajun Zhang, Xiguang Gao, Yingdong Song (2025). Applications of Machine Learning in Analysis and Design of Aerospace Composite Structures. Thin-Walled Structures.DOI
  43. Yaning Chang, Xuming Niu, Yasong Li, Jinyu, Shengsheng Yao, Zhigang Sun, Yingdong Song (2025). Research on a fatigue accelerated method based on nonstationary load characteristic identification and acceleration criteria for aero-engines. Aerospace Science and Technology.DOI
  44. Pengze Yang, Lijun Xiong, Guoqiang Wen, Lixia Yang, Zhaofeng Chen, Kai Liu, Ce Sun, Xiguang Gao, Yingdong Song (2025). Improving mechanical properties of selective laser sintering‐printed SiC/Si composites via microspheres with trimodal grains. Journal of the American Ceramic Society.DOI
  45. Dong Han, Guangwu Fang, Haoxiang Wang, Jinling Gao, Jiagui Liu, Tao Wu, Xiguang Gao, Yingdong Song (2025). Strain rate effects on the anisotropic behavior of unidirectional CVI SiCf/PyC/SiC composites. International Journal of Applied Ceramic Technology.DOI
  46. Yue Zhou, Sheng Zhang, Chenxin Lin, Chengqian Dong, Xiguang Gao, Yingdong Song, Fang Wang (2025). Reliability prediction framework for woven CMCs structures based on multi-scale uncertainty and artificial neural networks. Composite Structures.DOI
  47. Zhanghui Li, Jiawei Guo, Jingqi Liang, Yixuan Jin, Ying Chen, Rong Jiang, Jiantao Liu, Yingdong Song (2025). Effects of phase angle and dwell time on the thermo-mechanical fatigue behavior of an advanced turbine disk alloy. Materials Characterization.DOI
  48. Yu Jin, Yingdong Song, Yaning Chang, Xuming Niu, Zhigang Sun, Shengsheng Yao (2025). Compilation of Aero-Engine Composite Flight Profiles Based on Flight Mission Segment Analysis. Journal of Aerospace Engineering.DOI
  49. Chenyang Liu, Sheng Zhang, Xu Zhang, Chengqian Dong, Fang Wang, Xiguang Gao, Yingdong Song (2025). Design and Static Strength Evaluation of SiC/SiC Turbine Blades Considering Manufacturing Constraints. Applied Composite Materials.DOI
  50. Guoqiang Yu, Jiaming Li, Qiang Qin, Beichen Xue, Zheng Ni, Shengbao Bai, Wenbing Ma, Yuanhui He, Siyuan Han, Zhanpeng Shi, Lulu Chang, Xiguang Gao, Yingdong Song (2025). Thermoresistance effect and model of SiCf/PyC/SiC composites in a constituent scale. Sensors and Actuators A Physical.DOI
  51. Shengsheng Yao, Xuming Niu, Zhigang Sun, Yingdong Song (2025). A Method for the Life Assessment of Aero-Engine Turbine Disks Based on a Time-Varying Load Spectrum. Aerospace.DOI
  52. Hailang Ge, Lu Zhang, Yuchen Yang, Sheng Zhang, Fang Wang, Xiguang Gao, Yingdong Song (2025). Influence of high-speed gas flow on the tensile strength of 2.5D C/SiC composites. Journal of Materials Research and Technology.DOI
  53. Chenyang Liu, Sheng Zhang, Xu Zhang, Chengqian Dong, Fang Wang, Xiguang Gao, Yingdong Song (2025). Experimental and numerical investigation on mechanical properties and failure modes of SiC/SiC tapered laminates: Effects of ply drop location. Composite Structures.DOI
  54. Han Xiao, Zhenhao Fan, Xihui Chen, Shen Zhang, Tao Wu, Huajun Zhang, Xiguang Gao, Yingdong Song, Fang Wang (2025). Dynamic modeling of ceramic matrix composite materials/metal bolted connection structure: considering the nonuniform microstructure effects on the connection interface based on macro-micro integrated model and parameter identification. Advanced Composite Materials.DOI
  55. Shunyu Yao, Xuming Niu, Zhigang Sun, Yingdong Song (2025). Fatigue Load Characteristic Modeling Method for Aero-engines Based on the Novel Mixture Distribution. International Journal of Aeronautical and Space Sciences.DOI
  56. Xuming Niu, Jingyuan Hu, Lei Pan, Hanmin Xiao, Xubo Yao, Yingdong Song, Zhigang Sun (2025). Fiber damage mechanisms of SiCf/Ti6242 under fatigue load at elevated temperature. Engineering Fracture Mechanics.DOI
  57. Yue Wang, Rong Jiang, Mo Chen, Xiaoyu Li, Xuping Lu, Haiyong Zha, Yingdong Song (2025). Effect of Shaped Film Cooling Hole Manufacturing Defects on the High‐Cycle Fatigue Behavior of a Ni‐Based Single‐Crystal Superalloy. Fatigue & Fracture of Engineering Materials & Structures.DOI
  58. Beichen Xue, Guoqiang Yu, Jiaming Li, Zheng Ni, Wenbing Ma, Zhengqing Sui, Xiguang Gao, Yingdong Song (2025). The effect of damage and temperature on electrical impedance of SiCf/SiC mini-composites and a preliminary decoupling method. Journal of the European Ceramic Society.DOI
  59. H.X. Gong, Rong Jiang, Y. Wang, Yuxiang Liu, Xinyi Lu, Haiyong Zha, Yingdong Song (2025). Influence of film cooling holes and thermal barrier coating on the creep behavior of DD6 single crystal superalloy. Journal of Materials Research and Technology.DOI
  60. Xiao Han, Xihui Chen, Shen Zhang, Zhigang Sun, Xuming Niu, Xiguang Gao, Yingdong Song (2025). An Improved Method for Predicting Stress-Oxidation Deformation and Lifetime of SiC/SiC Composite and Experimental Verification. Applied Composite Materials.DOI
  61. Tao Wu, Mingzhuo Zhao, Zhikang Zheng, Xiguang Gao, Yingdong Song, Ruimeng Yang (2025). Experimental study of dynamic properties of CMC flat plates in oxidative environment. Journal of Composite Materials.DOI
  62. Dong Han, Guangwu Fang, Haoxiang Wang, Jinling Gao, Jiagui Liu, Tao Wu, Xiguang Gao, Yingdong Song (2025). Dynamic tensile behavior of unidirectional CVI SiCf/SiC composites with PyC interface. Journal of the European Ceramic Society.DOI
  63. Xiao Han, Hailang Ge, Xihui Chen, Lu Zhang, Zhenhao Fan, Huajun Zhang, Xiguang Gao, Yingdong Song, Fang Wang (2025). Macro-micro integrated modeling and analysis method for ceramic matrix composite material structures with stress concentration. Composite Structures.DOI
  64. Lu Zhang, Yuzhuo Wang, Zhi-wei Yu, Rong Jiang, Liguo Zhao, Yingdong Song (2025). Mechanisms of Thermo-Mechanical Fatigue Crack Propagation in a Polycrystalline Ni-Base Superalloy. Mechanisms and machine science.DOI
  65. 卢绪平,王跃,陈墨,江荣,何云,宋迎东(2024). 气膜孔对DD6镍基单晶高温合金高周疲劳强度的影响研究. 《推进技术》.
  66. 赵世成,江荣,龚浩翔,张禄,卢绪平,查海勇,宋迎东(2024). 异形气膜孔对镍基单晶合金蠕变性能的影响. 《航空学报》.
  67. 杜金康,于国强,庞洋龙,张华军,梁小强,高希光,宋迎东(2024). 环境温度对二维编织SiC/SiC复合材料拉伸性能的影响研究. 《推进技术》.
  68. 张禄,余志伟,陈阳,张磊成,江荣,田高峰,宋迎东(2024). 高温氧化对粉末高温合金微观结构和疲劳性能影响研究. 《推进技术》.
  69. 尤超,孙志刚,于国强,宋迎东(2024). 虚实结合的“航空发动机结构分析与设计”实践课教学模式探索. 《工业和信息化教育》.
  70. 方光武,谢浩元,张华军,高希光,宋迎东(2024). CMC-EBC损伤耦合机理及一体化设计研究进展. 《无机材料学报》.
  71. 宋迎东,於志文(2024). 产教深度融合自主培养卓越工程师的探索与实践. 《学位与研究生教育》, No. 12.下载原文
  72. 于国强,高希光,宋迎东(2024). 基于“跨界”导师团的研究生培养模式探索——以提升航空宇航推进理论与工程专业研究生创新能力为例. 《黑龙江教育(理论与实践)》.
  73. Beichen Xue, Guoqiang Yu, Jiaming Li, Wenbing Ma, Zheng Ni, Xiguang Gao, Yingdong Song (2024). Multiscale modeling and analysis of electro-mechanical properties for plain woven SiCf/PyC/SiC composite under high-temperature tension. Ceramics International.DOI
  74. Sheng Zhang, Tong Wang, Chengqian Dong, Xiaoqiang Liang, Xiguang Gao, Yingdong Song, Fang Wang (2024). Fatigue Damage Evolution Model of Ceramic Matrix Composites Structures Based on Hysteresis loss Energy and life Prediction at Elevated Temperatures. Applied Composite Materials.DOI
  75. Xie Haoyuan, Fang Guangwu, Xiguang Gao, Song Yingdong (2024). CMC strength and damage prediction considering thermal mechanic coupling effect. Journal of Reinforced Plastics and Composites.DOI
  76. Hailang Ge, Lu Zhang, Huajun Zhang, Fang Wang, Xiguang Gao, Yingdong Song (2024). Cyclic Ablation Properties of C/SiC-ZrC Composites. Aerospace.DOI
  77. Guangwu Fang, Zheng Mingwei, Chen Mingzhu, Xiguang Gao, Song Yingdong (2024). Stochastic Simulation of Thermal Residual Stress in Environmental Barrier Coated 2.5D Woven Ceramic Matrix Composites. Journal of Materials Engineering and Performance.DOI
  78. Chenyu Yang, Chao You, Weilong Wu, Qiyu Wu, Xiguang Gao, Fang Wang, Yingdong Song (2024). Multi-scale analysis of the progressive failure behaviour of 2.5D woven SiC/SiC composites under compression. Journal of Materials Research and Technology.DOI
  79. Li Juan Sun, Xu Jia, Rong Jiang, Yingdong Song, Lei Zhu (2024). Effect of Temperature on Foreign Object Damage Characteristics and High Cycle Fatigue Performance of Nickel-Based Superalloy GH4169. Aerospace.DOI
  80. Xu Zhang, Sheng Zhang, Huajun Zhang, Xiguang Gao, Yingdong Song (2024). Large deformation of variable thickness woven composite preforms considering interlayer difference. Application: Forming simulation of a blade preform. Textile Research Journal.DOI
  81. Lei Pan, Zhigang Sun, Xuming Niu, Jiaoling Shi, Yingdong Song (2024). Heat treatment effects on the shear performance and microstructure evolution of W-core SiC fibers. Ceramics International.DOI
  82. Xu Zhang, Sheng Zhang, Huajun Zhang, Chenyang Liu, Yue Zhou, Chengqian Dong, Xiguang Gao, Fang Wang, Yingdong Song (2024). A hyperelastic model considering the coupling of shear-compression for the forming simulation of 3D orthogonal composite preforms. Composites Science and Technology.DOI
  83. Chengqian Dong, Hongnian Dong, Sheng Zhang, Yue Zhou, Xu Zhang, Chenyang Liu, Yingdong Song, Xiguang Gao, Fang Wang (2024). Interface wear law and modeling between yarns in woven CMC under cyclic loading. Journal of the European Ceramic Society.DOI
  84. Hanmin Xiao, Xuming Niu, Zhigang Sun, Yu‐Long Wang, Yingdong Song (2024). Multiscale Analysis of the Stress and Burst Speed of a Titanium Matrix Composite Ring Considering the Viscoplasticity of the Matrix. Applied Composite Materials.DOI
  85. Guoqiang Yu, Beichen Xue, Jiaming Li, Wenbing Ma, Zheng Ni, Yuanhui He, Chuyang Xie, Jinkang Du, Xiguang Gao, Yingdong Song (2024). Monitoring damage evolution of SiCf/PyC/SiC mini-composites using electrical resistivity: Crack opening distance and interphase retention rate based electromechanical modeling. NDT & E International.DOI
  86. Xuming Niu, Yue Liu, Shuaishuai Zhang, Zhigang Sun, Yingdong Song (2024). An optimized multiaxial fatigue life prediction model based on the subcritical plane method. Materials Science and Technology.DOI
  87. Yue Zhou, Sheng Zhang, Huajun Zhang, Chengqian Dong, Xiguang Gao, Yingdong Song, Fang Wang (2024). Strength analysis method of CMCs tip shroud structure considering random distribution of preform properties. Aerospace Science and Technology.DOI
  88. Sheng Zhang, Kaiyu Wang, Huajun Zhang, Tong Wang, Xiguang Gao, Yingdong Song, Fang Wang (2024). An improved YOLOv8 for fiber bundle segmentation in X-ray computed tomography images of 2.5D composites to build the finite element model. Composites Part A Applied Science and Manufacturing.DOI
  89. Tianshan Li, Guoqiang Yu, Shihao Zhou, Zhikang Zheng, Xiguang Gao, Yingdong Song (2024). In-plane shear failure behavior and mechanical properties of SiC/SiC Composites. Journal of Physics Conference Series.DOI
  90. Lu Zhang, Y.C. Wang, Zhi-wei Yu, Rong Jiang, Konstantinos P. Baxevanakis, Anish Roy, Liguo Zhao, Gaofeng Tian, Yingdong Song (2024). Thermo-mechanical fatigue crack growth in a nickel-based powder metallurgy superalloy. International Journal of Fatigue.DOI
  91. Xiaoting Shi, Zheng Ni, Wenbing Ma, Zhengqing Sui, Guoqiang Yu, Xiguang Gao, Yingdong Song, Fang Wang (2024). The oxidation life analysis method for SiC/SiC composite components based on an equivalent diffusion coefficient model. International Journal of Applied Ceramic Technology.DOI
  92. Xu Jia, Li Sun, Rong Jiang, Dawei Ji, Zuopeng Zhao, Yingdong Song, Xuteng Hu (2024). Comprehensive effect of simulated centrifugal force on characteristics of different extent notch-type foreign object damages. Engineering Failure Analysis.DOI
  93. Sheng Zhang, Chengqian Dong, Huajun Zhang, Yue Zhou, Qiang Ke Chen, Xiguang Gao, Yingdong Song, Fang Wang (2024). Analysis method of non-periodic CMC structure based on super-element. Ceramics International.DOI
  94. Weijing Wu, Guoqiang Yu, Xiguang Gao, Fang Wang, Yingdong Song (2024). Degradation of SiC/BN/SiC minicomposites in heat–stress–moisture–oxygen coupling environments, I: Static fatigue test study. Journal of the European Ceramic Society.DOI
  95. Xu Sheng Zhao, He Zhao, Yingdong Song, Zhigang Sun, Xuming Niu, Sisi Yuan (2024). Micromechanical mechanism of creep secondary crack propagation behavior for superalloy. Journal of Alloys and Compounds.DOI
  96. Mingzhu Chen, Guangwu Fang, Xiguang Gao, Yingdong Song (2024). Thermo-Mechanical Stress Distributions in a Ceramic Matrix Composites Turbine Vane Coated with Environmental Barrier Coatings. Coatings.DOI
  97. Beichen Xue, Guoqiang Yu, Chuyang Xie, Wenbing Ma, Jiaming Li, Xiguang Gao, Fang Wang, Yingdong Song (2024). Electrical resistance based residual strength prediction method for SiC/SiC mini-composites after stress-free oxidation. Composites Part B Engineering.DOI
  98. Lu Zhang, Yuzhuo Wang, Zhi-wei Yu, Rong Jiang, Liguo Zhao, Yingdong Song (2024). Mechanisms of Thermo-Mechanical Fatigue Crack Growth in a Polycrystalline Ni-Base Superalloy. International Conference on Computational & Experimental Engineering and Sciences.DOI
  99. 葛海浪,张禄,吴涛,高希光,李冬,宋迎东(2023). 陶瓷基复合材料旋转爆震燃烧室壁面冷却研究. 《南京航空航天大学学报(自然科学版)》.
  100. 于泽,江荣,章敬鹏,罗思海,尤超,刘建涛,张义文,宋迎东(2023). 激光冲击强化对FGH4098合金疲劳裂纹萌生和扩展影响研究. 《推进技术》.DOI
  101. 孟维康,张盛,高希光,宋迎东,董洪年(2023). 考虑编织损伤的2.5D编织CMCs强度预测. 《推进技术》.
  102. 张禄,李伟龙,王玉卓,余志伟,江荣,宋迎东(2023). 铣削工艺参数对镍基粉末高温合金650℃低周疲劳寿命的影响(英文). Transactions of Nanjing University of Aeronautics and Astronautics.
  103. 张禄,余志伟,张磊成,江荣,宋迎东(2023). GH4169高温合金热机械疲劳循环损伤机理及数值模拟. 《金属学报》.
  104. 于国强,孙志刚,尤超,宋迎东(2023). “航空发动机结构分析与设计”课程线上线下混合式教学及思政教学实践研究. 《工业和信息化教育》.
  105. 万煜玮,周斌,胡绪腾,江荣,宋迎东,郭秩维,李瑾亮(2023). 某镍基粉末合金高温疲劳裂纹扩展行为与模型研究. 《推进技术》.
  106. 朱磊,王易成,张皓,陈阳,江荣,宋迎东(2023). 具有不同梯度晶粒组织的粉末高温合金疲劳小裂纹扩展原位观察. 《粉末冶金技术》.
  107. 尤超,孙志刚,于国强,宋迎东(2023). “三全育人”背景下“航空发动机结构分析与设计”课程思政设计与案例式教学探索. 《工业和信息化教育》.
  108. 牛序铭,赵旭,王飞飞,张俊杰,孙志刚,宋迎东(2023). 基于损伤等效的航空发动机加速任务试车谱编制方法. 《推进技术》.DOI
  109. Guangwu Fang, Xiguang Gao, Yingdong Song (2023). A Review on Ceramic Matrix Composites and Environmental Barrier Coatings for Aero-Engine: Material Development and Failure Analysis. Coatings.DOI
  110. Liqiang Chen, Lei Pan, Haijun Xuan, Zhigang Sun, Xuming Niu, Yingdong Song, Yao Zheng (2023). High strain rate mechanical behavior of Ti-6Al-4V with micro–macro correlation under compressive loading. Engineering Failure Analysis.DOI
  111. Haiyang Yu, Wenping Liang, Qiang Miao, Tzee Luai Meng, Mengjuan Yin, Na Gong, Rahul Bapusaheb Karyappa, Xiaohu Huang, Xiguang Gao, Yingdong Song, Andrew Chun Yong Ngo, Hongfei Liu (2023). Effect of C/N incorporation on structural and crystallographic properties of TaNbZr coatings deposited by double-glow plasma surface alloying on Ti-alloy substrate. Surface and Coatings Technology.DOI
  112. Xu Zhang, Sheng Zhang, Dong Han, Chenyang Liu, Yue Zhou, Xiguang Gao, Yingdong Song (2023). Variability of sub-regional fibre strength in 3D orthogonal SiC fabrics and its effect on the constitutive response of composites. Journal of the European Ceramic Society.DOI
  113. Zheng Ni, Guoqiang Yu, Yi-Cheng Chen, Beichen Xue, Yangfang Deng, Wenbing Ma, Xiguang Gao, Yingdong Song (2023). Experimental and numerical analysis of CMCs mechanical properties under high-temperature thermal gradient environment. Ceramics International.DOI
  114. Lushuang Zhang, Lushuang Zhang, Yu Zhang, L.C. Zhang, L.C. Zhang, Rong Jiang, Liguo Zhao, Yingdong Song (2023). Thermo-mechanical fatigue deformation and fracture mechanisms of nickel-based powder metallurgy superalloy. International Journal of Fatigue.DOI
  115. Sheng Zhang, Chenyang Liu, Xu Zhang, Jinkang Du, Qiang Chen, Xiguang Gao, Yingdong Song (2023). Simulation of failure behavior of 2.5D SiC/SiC variable thickness dovetail joint structures based on mesoscale model. Composite Structures.DOI
  116. Meng Zhang, Ruixiang Liu, Qiang Miao, Wenping Liang, Hui Zhao, Kai Zang, Xiguang Gao, Yingdong Song (2023). Microstructure and mechanical properties evolution in tri-layer Si-HfO2/Yb2Si2O7/Yb2SiO5 environmental barrier coating by PS-PVD during post-annealing. Ceramics International.DOI
  117. Xu Sheng Zhao, Leicheng Zhang, Yingdong Song, Xuming Niu, Zhigang Sun, He Zhao, Heng Ni, Sisi Yuan (2023). Creep deformation and damage characteristics of nickel-based superalloy GH4169. Materials Science and Engineering A.DOI
  118. Jinkang Du, Guoqiang Yu, Shihao Zhou, Zheng Ni, Xiguang Gao, Yingdong Song, Fang Wang (2023). Effect of the thermally grown oxide and interfacial roughness on stress distribution in environmental barrier coatings. Journal of the European Ceramic Society.DOI
  119. Weijing Wu, Guoqiang Yu, Xiguang Gao, Yingdong Song (2023). A compact environmental performance testing apparatus for ceramic matrix minicomposites. Ceramics International.DOI
  120. Chuyang Xie, Guoqiang Yu, Wei Lü, Yuanhui He, Xiguang Gao, Yingdong Song (2023). Evolution of mechanical-acoustic-electrical properties on SiC filament underlaying an oxidation treatment. Ceramics International.DOI
  121. Xiao Han, Guoqiang Yu, Sheng Zhang, Jian Shi, Xiguang Gao, Yingdong Song, Fang Wang (2023). Effect of PyC Interface Thickness on the Heat-stability of Cansas-II SiCf/SiC Composites. Journal of Wuhan University of Technology-Mater Sci Ed.DOI
  122. Xuming Niu, Rutao Zhao, Zhigang Sun, Yingdong Song, Yaning Chang (2023). Research on crack propagation behaviour of nickel-based superalloy under thermal shock load. Materials Science and Technology.DOI
  123. Xuming Niu, Jiaoling Shi, Fan Zhang, Lei Pan, Zhigang Sun, Yingdong Song (2023). A macro-mesoscopic method for forced vibration behavior of SiCf/Ti composite cantilever beam. Mechanics Based Design of Structures and Machines.DOI
  124. Guoqiang Yu, Chuyang Xie, Jinkang Du, Zheng Ni, Lulu Chang, Xiguang Gao, Yingdong Song (2023). In-plane shear experimental method and mechanical behavior of ceramic matrix mini-composites. Journal of Materials Research and Technology.DOI
  125. Yuwei Wan, Xuteng Hu, Yingdong Song, Haitao Cui (2023). A crack growth model for nickel-based powder metallurgy superalloy considering creep zone at crack tip. Materials Today Communications.DOI
  126. Sheng Zhang, Yue Zhou, Xiguang Gao, Yingdong Song (2023). Influence of pore distribution on the failure behavior of CMC components. Ceramics International.DOI
  127. Xuming Niu, Hongtao Liu, Cong Xu, Zhigang Sun, Yingdong Song, Qi Lu (2023). Research on Aero-engine Maneuvering Load Distribution Based on POT Model. International Journal of Aeronautical and Space Sciences.DOI
  128. Haiyang Yu, Wenping Liang, Qiang Miao, Mengjuan Yin, Hehe Chen, Wei Yao, Yuanyuan Sun, Kai Zang, Xiguang Gao, Yingdong Song (2023). Microstructure and wear behavior of (ZrTaNb)C/N quaternary ceramic coatings prepared by double-cathode glow plasma surface alloying on titanium alloy. Wear.DOI
  129. Shihao Zhou, Guoqiang Yu, Zheng Ni, Jinkang Du, Chuyang Xie, Xiguang Gao, Yingdong Song (2023). Oxidation effects on failure mechanism of plain-woven SiC/SiC Z-pinned joints subjected to push-out loading. Journal of the European Ceramic Society.DOI
  130. Rong Jiang, Yinchen Wang, L.C. Zhang, Y. Chen, H. Zhang, Z.B. Wang, Yingdong Song (2023). Fatigue crack propagation behavior of the grain size transition zone in a dual microstructure turbine disc. International Journal of Fatigue.DOI
  131. Mengjuan Yin, Wenping Liang, Qiang Miao, Haiyang Yu, Wei Yao, Kai Zang, Yuanyuan Sun, Yaoyao Ma, Yuting Wu, Xiguang Gao, Yingdong Song (2023). Microstructure, mechanical and tribological behavior of CrHfNbTaTiCxNy high-entropy carbonitride coatings prepared by double glow plasma alloy. Wear.DOI
  132. Yang Zhao, Rong Jiang, Rui Wang, Z.H. Li, Lushuang Zhang, Liguo Zhao, Yingdong Song (2023). LCF life prediction of turbine disc alloy using crystal plasticity and 3D representative volume element containing twin boundaries. International Journal of Fatigue.DOI
  133. 宋迎东(2022). 航空发动机陶瓷基复合材料结构分析与设计.
  134. 魏婷婷,高希光,宋迎东(2022). 2D SiC/SiC复合材料电阻率对服役环境的响应特性. 《无机材料学报》.
  135. 宋迎东,凌晨,张磊成,李明亮,郭家玮,江荣(2022). 航空发动机和燃气轮机热端部件热腐蚀-疲劳研究进展. 《南京航空航天大学学报(自然科学版)》.
  136. 方光武,贾蕴发,高希光,宋迎东(2022). 陶瓷基复合材料疲劳损伤模拟与界面优化设计. 《现代技术陶瓷》.
  137. 方光武,贾蕴发,高希光,宋迎东(2022). 陶瓷基复合材料涡轮叶片损伤模拟与服役安全寿命预测. 《计算机辅助工程》.
  138. 杜金康,于国强,高希光,宋迎东(2022). SiC/SiC复合材料在高温燃气环境下的烧蚀机理. 《中国力学大会-2021+1论文集(第五册)》.DOI
  139. 杜金康,于国强,高希光,宋迎东(2022). SiC/SiC复合材料在高温燃气环境下的烧蚀机理研究. 《中国力学大会-2021+1论文集(第四册)》.DOI
  140. 张悦,江荣,张磊成,陈西辉,高希光,孙志刚,宋迎东(2022). 直接烧结6H-SiC氧化机理的实验研究与分子动力学模拟. 《航空材料学报》.
  141. 江荣,张悦,张磊成,高希光,宋迎东(2022). 直接烧结SiC循环氧化行为的试验研究. 《中国腐蚀与防护学报》.
  142. 刘胜,胡绪腾,万煜玮,宋迎东(2022). GH4169合金缺口件蠕变-疲劳交互作用试验研究. 《机械制造与自动化》.
  143. Xu Zhang, Sheng Zhang, Yunfa Jia, Chenyang Liu, Xiguang Gao, Fang Wang, Yingdong Song (2022). A parameterized and automated modelling method for 3D orthogonal woven composite RVEs considering yarn geometry variations. Composite Structures.DOI
  144. Xu Sheng Zhao, Xuming Niu, Yingdong Song, Zhigang Sun (2022). A novel damage constitutive model for creep deformation and damage evolution prediction. Fatigue & Fracture of Engineering Materials & Structures.DOI
  145. Xuming Niu, Xubo Yao, Yan Liu, Zhigang Sun, Yingdong Song (2022). Fatigue performance analysis of SiCf/Ti composites under spectrum load. International Journal of Fatigue.DOI
  146. Kai Zang, Xiping He, Wenping Liang, Qiang Miao, Yuanyuan Sun, Haiyang Yu, Mengjuan Yin, Xiguang Gao, Yingdong Song (2022). The mechanical properties and wear resistance of Hf-Ta-N coatings prepared by double glow plasma alloying technology. Ceramics International.DOI
  147. Jinkang Du, Guoqiang Yu, Yunfa Jia, Chenyang Liu, Zhengqing Sui, Xiguang Gao, Fang Wang, Yingdong Song (2022). Numerical study of residual stresses in environmental barrier coatings with random rough geometry interfaces. Ceramics International.DOI
  148. Changsong Wu, Rong Jiang, L.C. Zhang, Y.C. Wang, Y. Chen, Yingdong Song (2022). Oxidation accelerated dwell fatigue crack growth mechanisms of a coarse grained PM Ni-based superalloy at elevated temperatures. Corrosion Science.DOI
  149. Jinkang Du, Guoqiang Yu, Huajun Zhang, Yunfa Jia, Ruixiang Chen, Chenyang Liu, Xiguang Gao, Fang Wang, Yingdong Song (2022). Microstructural evolution mechanism of plain-woven SiC/SiC during thermal ablation. Corrosion Science.DOI
  150. Hanmin Xiao, Xihui Chen, Zhigang Sun, Yingdong Song, Xuming Niu (2022). An Elastoplastic-Damage Micromechanical Model and its Application to the Mechanical Analysis of SiC Fibre-reinforced Titanium Matrix Composite under Complex Stress States. Applied Composite Materials.DOI
  151. Jie Bian, Xihui Chen, Zhigang Sun, Xuming Niu, Xubo Yao, Weijing Wu, Yingdong Song (2022). A chemo‐mechanical coupled constitutive model applied to the oxidation simulation of SiC/SiC composite. International Journal of Applied Ceramic Technology.DOI
  152. Guoqiang Yu, Zheng Ni, Jian‐Wen Shi, Chuyang Xie, Xiguang Gao, Yingdong Song (2022). Shear failure evolution and its dispersion of plain woven ceramic matrix composites z‐pin structure. International Journal of Applied Ceramic Technology.DOI
  153. Xu Sheng Zhao, Xuming Niu, Yingdong Song, Zhigang Sun (2022). Improvement of Creep Behavior Prediction Using Threshold Stress and Tensile Properties: Introduction of the TTC Relations. Metallurgical and Materials Transactions A.DOI
  154. L.C. Zhang, Rong Jiang, Y.C. Wang, L. Zhang, J.T. Liu, Y.W. Zhang, Yingdong Song (2022). Effects of microstructure and temperature on short fatigue crack propagation behaviour of powder metallurgy superalloy FGH4098 in vacuum. Materials Science and Engineering A.DOI
  155. Guoqiang Yu, Yunfa Jia, Chuyang Xie, Jinkang Du, Xiguang Gao, Yingdong Song, Fang Wang (2022). Transverse tensile mechanical experimental method and behavior of ceramic matrix mini-composites. Composite Structures.DOI
  156. Xu Jia, Chen Ling, Ziwen Zhang, Rong Jiang, Yingdong Song (2022). Effect of the notched foreign object damage depth on the HCF strength of titanium alloy TC11. Engineering Fracture Mechanics.DOI
  157. Dong Han, Xu Jia, Huajun Zhang, Xiguang Gao, Han Xiao, Li Juan Sun, Zhikang Zheng, Lu Zhang, Fang Wang, Yingdong Song (2022). Foreign object damage and post-impact tensile behavior of plain-woven SiC/SiC composites. Composite Structures.DOI
  158. Hao Lin, Yangyang Liu, Wenping Liang, Qiang Miao, Shaoyun Zhou, Jiayu Sun, Qi Yan, Xiguang Gao, Yingdong Song, Kazuhiro Ogawa (2022). Effect of the Y2O3 amount on the oxidation behavior of ZrB2-SiC-based coatings for carbon/carbon composites. Journal of the European Ceramic Society.DOI
  159. Jinkang Du, Guoqiang Yu, Yunfa Jia, Zheng Ni, Xiguang Gao, Yingdong Song, Fang Wang (2022). Ultra-high temperature ablation behaviour of 2.5D SiC/SiC under an oxy-acetylene torch. Corrosion Science.DOI
  160. Rong Jiang, Wentian Zhang, Leicheng Zhang, Yang Zhao, Lu Zhang, Yingdong Song (2022). Strain localization and crack initiation behavior of a PM Ni‐based superalloy: SEM‐DIC characterization and crystal plasticity simulation. Fatigue & Fracture of Engineering Materials & Structures.DOI
  161. Sheng Zhang, Yuchun Feng, Xiguang Gao, Yingdong Song, Fang Wang, Shirong Zhang (2022). Modeling of fatigue failure for SiC/SiC ceramic matrix composites at elevated temperatures and multi-scale experimental validation. Journal of the European Ceramic Society.DOI
  162. Xu Jia, Zi‐Wen Zhang, Chen Ling, Xu‐ping Lu, Rong Jiang, Yingdong Song (2022). Foreign object damage characteristics and their effects on high cycle fatigue property of Ni‐based superalloy GH4169. Fatigue & Fracture of Engineering Materials & Structures.DOI
  163. Qi Lu, Zhigang Sun, Cong Xu, Sheng Min Zhao, Yingdong Song (2022). A new compilation method of general standard test load spectrum for aircraft engine. International Journal of Turbo and Jet Engines.DOI
  164. Pengjian Zou, Xuming Niu, Xihui Chen, Zhigang Sun, Yan Liu, Yingdong Song (2022). Micromechanical Analysis of SiC/Ti6Al4V Composite Under Complex Stress State. Applied Composite Materials.DOI
  165. Yue Zhang, JIANG Rong, ZHANG Leicheng, Xihui Chen, Xiguang Gao, SUN Zhigang, Song Yingdong (2022). Experimental study and molecular dynamics simulation of oxidation mechanisms of direct-sintered silicon carbide. DOAJ (DOAJ: Directory of Open Access Journals).DOI
  166. 徐雅洁,高希光,张华军,宋迎东(2021). 损伤对平纹编织陶瓷基复合材料梁振动特性影响的试验研究. 《推进技术》.DOI
  167. 韩笑,高希光,史剑,宋迎东,张盛,于国强(2021). 单向陶瓷基复合材料任意应力本构行为快速计算方法. 《推进技术》.DOI
  168. 方光武,贾蕴发,高希光,宋迎东(2021). 陶瓷基复合材料涡轮叶片损伤模拟与服役安全寿命预测. 《第十七届中国CAE工程分析技术年会》.DOI
  169. 丁小岑,何宁,宋迎东,孙志刚,石耀闻,杨吟飞(2021). TA19钛合金端面车削表面完整性的低周疲劳演化. 《航空材料学报》.
  170. 汪洁,胡绪腾,贾旭,孙力,冯引利,宋迎东(2021). 盘用材料缺口特征尺寸对缺口强度的影响. 《航空发动机》.DOI
  171. 江荣,吴常皓,万煜伟,张禄,宋迎东(2021). 涡轮盘合金氧化-疲劳裂纹扩展机理和寿命预测研究进展. 《机械工程学报》.
  172. 周标,徐颖,孙志刚,胡绪腾,宋迎东(2021). “航空发动机结构分析与设计”特色专业课程的实践教学改革与探索. 《工业和信息化教育》.
  173. 高希光,韩栋,宋迎东,张盛,于国强(2021). 陶瓷基复合材料结构的动力学强度设计方法:研究现状及展望. 《机械工程学报》.
  174. 韩笑,高希光,史剑,宋迎东,张盛,于国强(2021). 疲劳载荷下单向陶瓷基复合材料界面摩擦力识别. 《推进技术》.DOI
  175. 张天宏,孙志刚,谭慧俊,梁文萍,宋迎东(2021). 大工程观视域下“基本科研能力训练”课程教学的实践与探索——以飞行器动力工程专业为例. 《工业和信息化教育》.
  176. 宋迎东(2021). 前言. 《工业和信息化教育》.
  177. 于兵,黄向华,张天宏,宋迎东(2021). 基于虚拟仿真的“微型燃气涡轮发动机试车”实践课程的构建. 《工业和信息化教育》.
  178. Dawei Ji, Xianming Hu, Zuopeng Zhao, Xu Jia, Xuteng Hu, Yingdong Song (2021). Stress Rupture Life Prediction Method for Notched Specimens Based on Minimum Average Von Mises Equivalent Stress. Metals.DOI
  179. Xiguang Gao, Xu Zhang, Sheng Zhang, Chenyang Liu, Yuchun Feng, Yingdong Song, Fang Wang (2021). A parameterised and integrated modelling method for plain-weave composite preform of a component with complex geometry. Composites Part A Applied Science and Manufacturing.DOI
  180. Xu Sheng Zhao, Xuming Niu, Yingdong Song, Zhigang Sun (2021). An investigation of the nonlinear creep damage accumulation of different materials: Application of a novel damage model. Fatigue & Fracture of Engineering Materials & Structures.DOI
  181. Hongnian Dong, Xiguang Gao, Sheng Zhang, Yingdong Song, Fang Wang (2021). Mechanical Modeling of Transverse Constitutive Relationship of Yarns in Plain-woven SiC/SiC Composites at the Mesoscale. Applied Composite Materials.DOI
  182. Hongnian Dong, Xiguang Gao, Sheng Zhang, Yingdong Song, Jinshan Yang, Fang Wang (2021). Effects of heat treatment on the mechanical properties at elevated temperatures of plain-woven SiC/SiC composites. Journal of the European Ceramic Society.DOI
  183. Xiao Han, Xihui Chen, Junjie Ding, Weijing Wu, Zhigang Sun, Yingdong Song (2021). Influence of heat treatment on microstructure and mechanical properties of Cansas-II SiC/PyC/CVI-SiC mini-composites. Ceramics International.DOI
  184. Xiao Han, Xihui Chen, Xuming Niu, Zhigang Sun, Yingdong Song (2021). Effect of interface types on the heat-resistance of Cansas-II SiCf /SiC composites. Ceramics International.DOI
  185. Xuming Niu, Jie Bian, Xihui Chen, Junjie Ding, Zhigang Sun, Yingdong Song (2021). Molecular dynamics simulation on PyC interfacial failure mechanism and shear strength of SiC/SiC composites. Modelling and Simulation in Materials Science and Engineering.DOI
  186. Xihui Chen, Zhigang Sun, Xiao Han, Xuming Niu, Yingdong Song (2021). Evolution of microstructure and tensile strength of Cansas-II SiC fibers under air oxidizing atmosphere. Journal of the European Ceramic Society.DOI
  187. Yunfa Jia, Guoqiang Yu, Jinkang Du, Xiguang Gao, Yingdong Song, Fang Wang (2021). Adopting traditional image algorithms and deep learning to build the finite model of a 2.5D composite based on X-Ray computed tomography. Composite Structures.DOI
  188. Xiao Han, Guoqiang Yu, Rong Pan, Hongyan Shao, Chuyang Xie, Huajun Zhang, Xiguang Gao, Yingdong Song, Fang Wang (2021). Tensile and stressed-oxidation behavior of 2D SiC/BN/SiC composites at Intermediate Temperatures in Air. Ceramics International.DOI
  189. Guoqiang Yu, Yunfa Jia, Chengqian Dong, Xiguang Gao, Fang Wang, Yingdong Song (2021). Geometric parameters characterization of minicomposite and modulus prediction of 2D composite based on X-ray computed tomography. Ceramics International.DOI
  190. Junjie Ding, Zhigang Sun, Xihui Chen, Xuming Niu, Yu Qiang Jin, Yingdong Song (2021). A Progressive Oxidative Damage Model of C/SiC Composites under Stressed Oxidation Environments. Applied Composite Materials.DOI
  191. Yu Jin, Zhigang Sun, Yingdong Song, Xin Lin, Xuming Niu, Junjie Ding (2021). Mission segment division of the whole aeroengine loading spectrum based on flight actions. Chinese Journal of Aeronautics.DOI
  192. Guoqiang Yu, Jinkang Du, Xuecan Zhao, Chuyang Xie, Xiguang Gao, Yingdong Song, Fang Wang (2021). Morphology and microstructure of SiC/SiC composites ablated by oxyacetylene torch at 1800°C. Journal of the European Ceramic Society.DOI
  193. Yunfa Jia, Guoqiang Yu, Weikang Meng, Xiguang Gao, Yingdong Song, Fang Wang (2021). Tension–tension fatigue behavior and residual strength evolution of SiC/(PyC/SiC)2/SiC minicomposites prepared by CVI+MI and CVI+PIP processes. Ceramics International.DOI
  194. Xiao Han, Rong Pan, Jian Ying Shi, Guoqiang Yu, Fangxiao Song, Xiguang Gao, Yingdong Song, Fang Wang (2021). Stressed-oxidation behavior of 2D CVI SiC/BN/SiC at elevated temperature in air. Ceramics International.DOI
  195. Xihui Chen, Zhigang Sun, Xuming Niu, Jie Bian, Yingdong Song, Jinchen Liu (2021). Evolution of the structure and mechanical performance of Cansas-II SiC fibres after thermal treatment. Ceramics International.DOI
  196. Sheng Zhang, Weikang Meng, Xiguang Gao, Yingdong Song, Zhiguo Zhang (2021). Size Effect of Strength for SiC/SiC Composites: Experimental Study and Theoretical Analysis. Applied Composite Materials.DOI
  197. Tingting Wei, Xiguang Gao, Yingdong Song (2021). Response of 2D SiC/SiC Composites Resistivity to Service Environments. Journal of Inorganic Materials.DOI
  198. Yunfa Jia, Guoqiang Yu, Jian Lin Shi, Song Dong, Xiguang Gao, Yingdong Song, Fang Wang (2021). Influence of tensile pre-fatigue stress on residual strength of SiC/(PyC/SiC)2/SiC minicomposites. Ceramics International.DOI
  199. Rong Jiang, L.C. Zhang, W.T. Zhang, Yunshi Zhang, Y. Chen, J.T. Liu, Zhang Na, Yingdong Song (2021). Low cycle fatigue and stress relaxation behaviours of powder metallurgy Ni-based superalloy FGH4098. Materials Science and Engineering A.DOI
  200. Yan Liu, Zhigang Sun, Xuming Niu, Xihui Chen, Yingdong Song, Pengjian Zou (2021). The Constitutive Model of a Unidirectional SiC Fiber-Reinforced Titanium Matrix Composite During Spectrum Loading. Applied Composite Materials.DOI
  201. Zhuangzhuang Chen, Zhigang Sun, Xihui Chen, Youxun Wu, Xuming Niu, Yingdong Song (2021). ReaxFF reactive molecular dynamics study on oxidation behavior of 3C-SiC in H2O and O2. Computational Materials Science.DOI
  202. Guoqiang Yu, Xiaoting Shi, Yuanhong Wang, Jinkang Du, Zheng Ni, Xiguang Gao, Fang Wang, Yingdong Song (2021). An equivalent diffusion coefficient model of the oxidation of ceramic matrix composites. Ceramics International.DOI
  203. Hongnian Dong, Xiguang Gao, Sheng Zhang, Guoqiang Yu, Yingdong Song, Fang Wang (2021). Multi-scale modeling and experimental study of fatigue of plain-woven SiC/SiC composites. Aerospace Science and Technology.DOI
  204. Xuming Niu, Yan Liu, Xihui Chen, Jinchen Liu, Zhigang Sun, Yingdong Song (2021). Growth behavior of short fatigue cracks in a unidirectional SiC fiber-reinforced titanium matrix composite under spectrum loading. Theoretical and Applied Fracture Mechanics.DOI
  205. Deqiao Xie, Fei Lv, Huixin Liang, Lida Shen, Zongjun Tian, Jianfeng Zhao, Yingdong Song, Cijun Shuai (2021). Towards a comprehensive understanding of distortion in additive manufacturing based on assumption of constraining force. Virtual and Physical Prototyping.DOI
  206. Xiao Han, Xiguang Gao, Yingdong Song, Yuchun Feng (2021). Prediction of stress–strain response of unidirectional ceramic matrix composites under arbitrary loading and unloading. Advances in Applied Ceramics Structural Functional and Bioceramics.DOI
  207. Xihui Chen, Zhigang Sun, Zhuangzhuang Chen, Yingdong Song, Xuming Niu (2021). ReaxFF molecular dynamics simulation of oxidation behavior of 3C-SiC in O2 and CO2. Computational Materials Science.DOI
  208. Rong Jiang, L.C. Zhang, Yang Zhao, X. H. Chen, B. Gan, Xian Chao Hao, Yingdong Song (2021). Effects of Hot Corrosion on Fatigue Performance of GH4169 Alloy. Journal of Materials Engineering and Performance.DOI
  209. Xihui Chen, Zhigang Sun, Xuming Niu, Yingdong Song (2021). In situ investigation of tensile behavior of C f /SiC mini composites. International Journal of Applied Ceramic Technology.DOI
  210. Xihui Chen, Weijing Wu, Zhigang Sun, Yingdong Song, Xuming Niu (2021). Modeling the Effect of Oxidation on the Creep Behavior of SiC/PyC/SiC Mini-composites Under Wet Oxygen Atmosphere. Applied Composite Materials.DOI
  211. JIANG Rong, WU Chang-hao, WAN Yuwei, Lu Zhang, Song Yingdong (2021). Progress on Oxidation-fatigue Crack Propagation Mechanisms and Life Prediction in Turbine Disc Alloys. Journal of Mechanical Engineering.DOI
  212. 朱宝城,高希光,宋迎东(2020). 陶瓷基复合材料螺栓渐进损伤计算与强度预测. 《推进技术》.DOI
  213. 陈西辉,孙志刚,牛序铭,江荣,高希光,宋迎东(2020). SiC/SiC复合材料氧化退化研究进展. 《推进技术》.DOI
  214. 方光武,高希光,宋迎东(2020). 2.5D编织陶瓷基复合材料环境障碍涂层损伤模拟. 《第二十一届全国复合材料学术会议(NCCM-21)》.DOI
  215. 任嘉成,方光武,钟毅,高希光,宋迎东(2020). 多层界面相对陶瓷基复合材料横向开裂的影响模拟. 《机械强度》.DOI
  216. 许聪,孙志刚,陆琪,宋迎东(2020). 基于雨流计数的航空发动机载荷谱滤波方法(英文). Transactions of Nanjing University of Aeronautics and Astronautics.DOI
  217. 杜翔宇,高希光,宋迎东(2020). 2.5D C/SiC复合材料带孔板拉伸破坏的多尺度模拟. 《推进技术》.DOI
  218. Weijing Wu, Zhigang Sun, Xuming Niu, Xihui Chen, Yingdong Song (2020). Simulating the corrosion and microstructure evolution of SiCf/PyC/SiCm composites in a humid oxygen environment. Composite Interfaces.DOI
  219. Xiangming Jin, Yingdong Song, Xi Liu, Dianyin Hu (2020). Probabilistic life prediction for FCG degradation process of turbine disc with small sample data. Engineering Failure Analysis.DOI
  220. Hongnian Dong, Xiguang Gao, Yingdong Song (2020). Prediction model of matrix crack density in ceramic matrix composites under arbitrary matrix stress distribution. Mechanics of Advanced Materials and Structures.DOI
  221. Xiaoqiang Liang, Xiguang Gao, Huajun Zhang, Guoqiang Yu, Chuyang Xie, Shirong Zhang, Yingdong Song (2020). Interlaminar shear behaviors of 2D needled C/SiC composites under compressive and tensile loading. Ceramics International.DOI
  222. Xuteng Hu, Wenming Ye, Leicheng Zhang, Rong Jiang, Yingdong Song (2020). Investigation on creep properties and microstructure evolution of GH4169 alloy at different temperatures and stresses. Materials Science and Engineering A.DOI
  223. Peng Chen, Xuming Niu, Xihui Chen, Zhigang Sun, Pengjian Zou, Yingdong Song (2020). Modeling the Failure Time and Residual Strength of C/SiC Composites under Stress-Oxidation Environment. Transactions of the Indian Ceramic Society.DOI
  224. Rong Jiang, Yingdong Song, Philippa A. S. Reed (2020). Fatigue crack growth mechanisms in powder metallurgy Ni-based superalloys—A review. International Journal of Fatigue.DOI
  225. Xiao Dong Han, Xiguang Gao, Yunfa Jia, Weikang Meng, Yingdong Song, Yuchun Feng (2020). A method for identifying the interface shear stress of unidirectional ceramic matrix composites. Ceramics International.DOI
  226. Xihui Chen, Zhigang Sun, Peng Chen, Yingdong Song, Xuming Niu (2020). Modeling Thermal Expansion Behavior of 2.5 D C/SiC Composites in Air Oxidizing Environments between 400 °C and 800 °C. Applied Composite Materials.DOI
  227. Wenming Ye, Xuteng Hu, Yingdong Song (2020). A new creep model and its application in the evaluation of creep properties of a titanium alloy at 500 °C. Journal of Mechanical Science and Technology.DOI
  228. Dong Hwan Han, Xiguang Gao, Huajun Zhang, Sheng Zhang, Guoqiang Yu, Yingdong Song (2020). Dynamic and fluid-structure interaction simulations of a ceramic matrix composite plate. Composite Structures.DOI
  229. L. Zhu, Yingdong Song, Jianglan Chen (2020). Modeling of Multi-scale Fatigue Crack Growth in Titanium Alloy TC4. Iranian Journal of Science and Technology Transactions of Mechanical Engineering.DOI
  230. Chuyang Xie, Xiguang Gao, Huajun Zhang, Yingdong Song (2020). Multiscale acoustic emission of C/SiC mini-composites and damage identification using pattern recognition. Science and Engineering of Composite Materials.DOI
  231. Deqiao Xie, Jianfeng Zhao, Huixin Liang, Lida Shen, Zongjun Tian, Naveed Ahsan, Yingdong Song, Meng Xiao (2020). Comprehension of overhanging structure distortion via selective laser melting based on theory of constraining force induced distortion. International Bhurban Conference on Applied Sciences and Technology (IBCAST).DOI
  232. 方光武,高希光,宋迎东(2019). 基于裂纹带方法的陶瓷基复合材料多层界面相损伤演化有限元模拟. 《中国力学大会(CCTAM 2019)》.
  233. 杜宇飞,孙志刚,陆琪,宋迎东(2019). 基于任务段的航空发动机载荷谱聚类方法. 《航空动力学报》.DOI
  234. 孙志刚,崔海涛,宋迎东(2019). 《航空复合材料及其力学分析》教材建设与思考. 《工业和信息化教育》.
  235. 张冬阁,胡绪腾,倪卓慧,叶文明,贾旭,宋迎东(2019). 镍基高温合金紧凑拉伸试样侧槽优选研究及试验. 《推进技术》.DOI
  236. 宋迎东,高希光,孙志刚(2019). 航空发动机陶瓷基复合材料疲劳迟滞机理与模型研究进展. 《南京航空航天大学学报(自然科学版)》.DOI
  237. 方光武,高希光,宋迎东(2019). 多层界面相陶瓷基复合材料裂纹偏转机制模拟. 《航空动力学报》.DOI
  238. 李林骏,胡绪腾,宋迎东,孟卫华(2019). 某镍基单晶高温合金塑性变形与失效分析. 《航空发动机》.DOI
  239. 贾旭,胡绪腾,宋迎东(2019). 虑及高循环疲劳的裂纹型外物损伤叶片的可用极限. 《航空动力学报》.
  240. Wenming Ye, Xuteng Hu, Yingdong Song (2019). The relationship between creep and tensile properties of a nickel-based superalloy. Materials Science and Engineering A.DOI
  241. Xihui Chen, Zhigang Sun, Hongyu Li, Yingdong Song, Xuming Niu (2019). Modeling the effect of oxidation on the residual tensile strength of SiC/C/SiC minicomposites in stressed oxidizing environments. Journal of Materials Science.DOI
  242. Fan Zhang, Xuming Niu, Xihui Chen, Zhigang Sun, Yingdong Song (2019). Simulation of tension-compression hysteresis loop of an unidirectionally SiC fiber-reinforced titanium matrix composite. Composite Interfaces.DOI
  243. Yan Cai Xiong, Xuming Niu, Xihui Chen, Zhigang Sun, Hongyu Li, Yingdong Song (2019). A model for predicting residual stiffness of unidirectional SiC/SiC composite under stress oxidation environment. Composite Interfaces.DOI
  244. Xiguang Gao, Hao Duan, Long Li, Sheng Zhang, Guoqiang Yu, Yingdong Song (2019). Fatigue limit prediction model of ceramic matrix minicomposites. Ceramics International.DOI
  245. Guangwu Fang, Xiguang Gao, Yingdong Song (2019). XFEM Analysis of the Effect of Fiber Volume Fraction on Crack Propagation in Fiber Reinforced Ceramic Matrix Composites. IOP Conference Series Materials Science and Engineering.DOI
  246. Xiguang Gao, Hongnian Dong, Sheng Zhang, Yingdong Song (2019). Multi-Scale Modeling and Experimental Study of the Strength of Plain-Woven SiC/SiC Composites. Applied Composite Materials.DOI
  247. Guangwu Fang, Xiguang Gao, Yingdong Song (2019). XFEM analysis of crack propagation in fiber-reinforced ceramic matrix composites with different interphase thicknesses. Composite Interfaces.DOI
  248. Lei Zhu, Xuteng Hu, Rong Jiang, Yingdong Song, Shoudao Qu (2019). An investigation of small fatigue crack behavior in titanium alloy TC4 under different stress levels. Proceedings of the Institution of Mechanical Engineers Part G Journal of Aerospace Engineering.DOI
  249. Rong Jiang, D. W. Ji, H. C. Shi, Xuteng Hu, Yingdong Song, B. Gan (2019). Effects of thermal exposure on high-cycle-fatigue behaviours in Ni-based superalloy GH4169. Materials Science and Technology.DOI
  250. Xiguang Gao, Tingting Wei, Hongnian Dong, Yingdong Song (2019). Damage detection in 2.5D C/SiC composites using electrical resistance tomography. Journal of the European Ceramic Society.DOI
  251. Weiyi Sun, Zhigang Sun, Qi Lu, Xihui Chen, Yingdong Song (2019). Fatigue Hysteresis Loops Simulation of SiCf /Ti Composites under Two-Stage Cyclic Loading. Applied Composite Materials.DOI
  252. Xuming Niu, Zhigang Sun, Yingdong Song (2019). Strength properties and its dispersion of 2.5D-C/SiC composites. Mechanics Based Design of Structures and Machines.DOI
  253. Zhigang Sun, Jianfen Sun, Yaning Chang, Weiyi Sun, Lu Qi, Yingdong Song (2019). Axial Tensile Failure Analysis of SiCf/Ti Composite Based on Continuum Cohesive Zone Model. Journal of Materials Engineering and Performance.DOI
  254. Xu Jia, Xuteng Hu, Zijia Zhu, Yingdong Song (2019). Fatigue strength predictions of FOD dents using ΔK threshold methods considering residual stresses. Journal of Mechanical Science and Technology.DOI
  255. 韩笑,高希光,宋迎东(2018). 基于单向陶瓷基复合材料拉伸曲线的细观力学参数识别. 《推进技术》.
  256. 巢青,孙剑芬,孙志刚,宋迎东(2018). 金属基复合材料力学性能研究进展. 《航空发动机》.
  257. 杨丛橙,高希光,于国强,宋迎东(2018). 循环载荷对单向CMCs应变分布均匀性的影响. 《推进技术》.
  258. 孙力,胡绪腾,宋迎东(2018). 基于连续损伤力学的轮盘超转破裂行为预测与验证. 《航空发动机》.
  259. 许凯旋,胡绪腾,宋迎东(2018). 考虑静水压力和LODE角的塑性模型在GH4169合金上的应用. 《航空发动机》.
  260. 方光武,高希光,宋迎东(2018). 陶瓷基复合材料多层界面相应力传递的有限元模拟. 《复合材料学报》.
  261. 胡绪腾,贾旭,朱自佳,嵇大伟,宋迎东(2018). 凹坑型硬物损伤对TC4材料疲劳强度的影响. 《航空动力学报》.
  262. 贾旭,胡绪腾,朱自佳,嵇大伟,宋迎东(2018). FOD缺口型损伤对TC4疲劳极限强度的影响. 《航空动力学报》.
  263. 贾旭,胡绪腾,宋迎东(2018). 复杂载荷下偏心穿透裂纹应力强度因子的计算方法. 《航空动力学报》.
  264. Xiao Han, Xiguang Gao, Yingdong Song (2018). Effect of heat treatment on the microstructure and mechanical behavior of SiC/SiC mini-composites. Materials Science and Engineering A.DOI
  265. Sheng Zhang, Xiguang Gao, Xiao Han, Hao Duan, Yingdong Song (2018). Prediction of strength and constitutive response of SiC/SiC composites considering fiber failure. Composites Part B Engineering.DOI
  266. Lei Zhu, Z. R. Wu, Xuteng Hu, Yingdong Song (2018). Comparative study of small crack growth behavior between specimens with and without machining-induced residual stress of alloy GH4169. Journal of Mechanical Science and Technology.DOI
  267. Lei Zhu, Xuteng Hu, Rong Jiang, Yingdong Song, Shoudao Qu (2018). Experimental investigation of small fatigue crack growth due to foreign object damage in titanium alloy TC4. Materials Science and Engineering A.DOI
  268. Guoqiang Yu, Xiguang Gao, Chuyang Xie, Yingdong Song (2018). In‐plane shear damage behaviours of 2D needled C/SiC composites. Fatigue & Fracture of Engineering Materials & Structures.DOI
  269. Xuteng Hu, Lei Zhu, Rong Jiang, Yingdong Song, Shoudao Qu (2018). Small fatigue crack growth behavior of titanium alloy TC4 at different stress ratios. Fatigue & Fracture of Engineering Materials & Structures.DOI
  270. Rong Jiang, Daniela Proprentner, M. Callisti, Barbara A. Shollock, Xuteng Hu, Yingdong Song, Philippa A. S. Reed (2018). Role of oxygen in enhanced fatigue cracking in a PM Ni-based superalloy: Stress assisted grain boundary oxidation or dynamic embrittlment? Corrosion Science.DOI
  271. Sheng Zhang, Xiguang Gao, Yingdong Song (2018). In Situ Strength Model for Continuous Fibers and Multi-Scale Modeling the Fracture of C/SiC Composites. Applied Composite Materials.DOI
  272. Z. R. Wu, Xing Li, L. Fang, Yingdong Song (2018). Multiaxial Fatigue Life Prediction Based on Nonlinear Continuum Damage Mechanics and Critical Plane Method. Journal of Materials Engineering and Performance.DOI
  273. Guoqiang Yu, Xiguang Gao, Yue Chen, Yingdong Song (2018). Failure Modeling of SiC/SiC Mini-Composites in Air Oxidizing Environments. Applied Composite Materials.DOI
  274. Xiguang Gao, Dong Hwan Han, Jing Chen, Hongnian Dong, Yingdong Song (2018). Numerical and experimental study on the nonlinear dynamic response of a ceramic matrix composites beam. Ceramics International.DOI
  275. 方光武,宋迎东,高希光(2017). 层合陶瓷基复合材料多尺度应力—应变计算模型. 《航空动力学报》.
  276. 朱磊,吴志荣,胡绪腾,宋迎东(2017). 镍基合金GH4169疲劳小裂纹的扩展行为. 《航空动力学报》.
  277. Xuming Niu, Zhigang Sun, Yingdong Song, Xiguang Gao (2017). Tensile properties of 3-Dimension-4-directional braided Cf/SiC composite based on double-scale model. Journal of Wuhan University of Technology-Mater Sci Ed.DOI
  278. 江朝振,闫国华,张鸿,宋迎东(2017). 航空涡扇发动机涡轮噪声适航性评估. 《航空动力学报》.
  279. Xuming Niu, Zhigang Sun, Yingdong Song (2017). Transverse Tensile Properties of 3 Dimension-4 Directional Braided Cf/SiC Composite Based on Double-Scale Model. Applied Composite Materials.DOI
  280. Z. R. Wu, Xuteng Hu, L. Zhu, Yingdong Song, Z. X. Li (2017). Evaluation of Fatigue Life for TC4 Notched Components Under Variable Amplitude Multiaxial Loading. Iranian Journal of Science and Technology Transactions of Mechanical Engineering.DOI
  281. Yaning Chang, Zhigang Sun, Weiyi Sun, Yingdong Song (2017). A New Adaptive Response Surface Model for Reliability Analysis of 2.5D C/SiC Composite Turbine Blade. Applied Composite Materials.DOI
  282. Xuteng Hu, Xu Jia, Zhenqiang Bao, Yingdong Song (2017). Effect of notch geometry on the fatigue strength and critical distance of TC4 titanium alloy. Journal of Mechanical Science and Technology.DOI
  283. Xiguang Gao, Xiao Yi Han, Yingdong Song (2017). X-ray computed tomography based microstructure reconstruction and numerical estimation of thermal conductivity of 2.5D ceramic matrix composite. Ceramics International.DOI
  284. Guoqiang Yu, Xiguang Gao, Yingdong Song (2017). Experimental investigation of the tension-torsion coupling behavior on needled unidirectional C/SiC composites. Materials Science and Engineering A.DOI
  285. Sheng Zhang, Xiguang Gao, Hongnian Dong, Xiaorong Ju, Yingdong Song (2017). In situ modulus and strength of carbon fibers in C/SiC composites. Ceramics International.DOI
  286. Xuteng Hu, Zhigang Sun, Fushu Yang, Xihui Chen, Yingdong Song (2017). Fatigue Hysteresis Behavior of 2.5D Woven C/SiC Composites: Theory and Experiments. Applied Composite Materials.DOI
  287. Xihui Chen, Zhigang Sun, Jianfen Sun, Yingdong Song (2017). Simulation of Degraded Properties of 2D plain Woven C/SiC Composites under Preloading Oxidation Atmosphere. Applied Composite Materials.DOI
  288. Xiguang Gao, Guoqiang Yu, Jiangang Xue, Yingdong Song (2017). Failure analysis of C/SiC composites plate with a hole by the PFA and DIC method. Ceramics International.DOI
  289. 方光武,高希光,宋迎东(2016). 针刺C/SiC复合材料拉-压疲劳特性与失效机理. 《材料工程》.
  290. 叶文明,胡绪腾,马晓健,宋迎东(2016). 基于大变形蠕变分析的持久寿命预测方法. 《航空材料学报》.
  291. 孙志刚,宋迎东(2016). “航空发动机构造”现场教学改革与实践初探. 《工业和信息化教育》.
  292. 方光武,高希光,陈晶,张盛,宋迎东,王芳(2016). 加载循环数对2D针刺C/SiC复合材料疲劳剩余强度的影响. 《复合材料学报》.
  293. 薛建刚,高希光,方光武,张盛,宋迎东,王芳(2016). 2.5D C/SiC复合材料连续损伤本构模型. 《复合材料学报》.
  294. 薛建刚,高希光,方光武,张盛,宋迎东,王芳(2016). 针刺陶瓷基复合材料损伤本构模型及构件应力分析. 《航空动力学报》.
  295. 方光武,宋迎东,高希光(2016). 针刺C/SiC复合材料应力-应变模型及试验验证. 《复合材料学报》.
  296. 贾旭,胡绪腾,宋迎东(2016). 基于三维裂纹尖端应力场的应力强度因子计算方法. 《航空动力学报》.
  297. Sheng Zhang, Xiguang Gao, Hongnian Dong, Yingdong Song, Shengyang Pang (2016). Effects of gradual matrix crack closure on the constitutive behavior of SiC/SiC composites upon unloading. Ceramics International.DOI
  298. Guoqiang Yu, Xiguang Gao, Guangwu Fang, Jiangang Xue, Yingdong Song (2016). Strain field evolution of 2D needled C/SiC composites under tension. Journal of the European Ceramic Society.DOI
  299. Zhigang Sun, Xihui Chen, Hongyan Shao, Yingdong Song (2016). Numerical Modeling of Oxidized 2D C/SiC Composites in Air Environments Below 900 °C: Microstructure and Elastic Properties. Applied Composite Materials.DOI
  300. Sheng Zhang, Xiguang Gao, Jing Chen, Hongnian Dong, Yingdong Song (2016). Strength model of the matrix element in SiC/SiC composites. Materials & Design.DOI
  301. Zhigang Sun, Hongyan Shao, Xuming Niu, Yingdong Song (2016). Failure simulation of unidirectional fiber-reinforced ceramic matrix composites based on evolving compliant interfacial debonding model. Materials Science and Engineering A.DOI
  302. L. Zhu, Z. R. Wu, Xuteng Hu, Yingdong Song (2016). Investigation of small fatigue crack initiation and growth behaviour of nickel base superalloy GH4169. Fatigue & Fracture of Engineering Materials & Structures.DOI
  303. Zhigang Sun, Changxi Wang, Xuming Niu, Yingdong Song (2016). Design Optimization Method for Composite Components Based on Moment Reliability-Sensitivity Criteria. International Journal of Turbo and Jet Engines.DOI
  304. Zhigang Sun, Hongyan Shao, Xuming Niu, Yingdong Song (2016). Simulation of Mechanical Behaviors of Ceramic Composites Under Stress-Oxidation Environment While Considering the Effect of Matrix Cracks. Applied Composite Materials.DOI
  305. Wenming Ye, Hu Xuteng, Xiaojian Ma, Song Yingdong (2016). Creep Rupture Life Prediction Based on Analysis of Large Creep Deformation. DOAJ (DOAJ: Directory of Open Access Journals).DOI
  306. 贾旭,胡绪腾,宋迎东(2015). 基于三维有限元解的紧凑拉伸试样应力强度因子计算公式. 《机械工程材料》.
  307. Zhigang Sun, Shao-ming Ruan, Lei Chen, Yingdong Song (2015). Progressive failure analysis of composite structure based on micro- and macro-mechanics models. Journal of Central South University.DOI
  308. 贾旭,胡绪腾,宋迎东(2015). 三维矩形板1/4椭圆角裂纹的通用权函数. 《航空动力学报》.
  309. 包珍强,胡绪腾,宋迎东(2015). 不同冲击角度外物损伤对TC4钛合金高循环疲劳强度的影响. 《航空动力学报》.
  310. Xuming Niu, Zhigang Sun, Chunyuan Kong, Yingdong Song (2015). Elastic modulus prediction of three-dimension-4 directional braided Cf/SiC composite based on double-scale model. Journal of Wuhan University of Technology-Mater Sci Ed.DOI
  311. 高希光,郭海丁,宋迎东(2015). 研究生机械强度课程体系研究型教学模式的改革. 《高教论坛》.
  312. Zhigang Sun, Changxi Wang, Xuming Niu, Yingdong Song (2015). A response surface approach for reliability analysis of 2.5D C/SiC composites turbine blade. Composites Part B Engineering.DOI
  313. Guangwu Fang, Xiguang Gao, Guoqiang Yu, Sheng Zhang, Jing Chen, Yingdong Song (2015). Effect of the stress level on the fatigue strengthening behavior of 2D needled C/SiC CMCs at room temperature. Materials & Design.DOI
  314. Xiguang Gao, Sheng Zhang, Guangwu Fang, Yingdong Song (2015). Distribution of slip regions on the fiber–matrix interface of ceramic matrix composites under arbitrary loading. Journal of Reinforced Plastics and Composites.DOI
  315. L. B. Li, Yingdong Song, Yongjian Sun (2015). Modeling the Tensile Behavior of Cross-Ply C/SiC Ceramic-Matrix Composites. Mechanics of Composite Materials.DOI
  316. Guangwu Fang, Xiguang Gao, Sheng Zhang, Jiangang Xue, Yingdong Song, Fang Wang (2015). A residual strength model for the fatigue strengthening behavior of 2D needled CMCs. International Journal of Fatigue.DOI
  317. Xiguang Gao, Piaoyang Luo, Guangwu Fang, Sheng Zhang, Yingdong Song (2015). Micro-XCT-based finite element method for predicting the elastic modulus of needle carbon-fiber-reinforced ceramic matrix composites. Science and Engineering of Composite Materials.DOI
  318. 宋迎东,胡绪腾,刘华翔(2014). 钛合金缺口试样拉伸破坏载荷预测. 《南京航空航天大学学报(自然科学版)》.
  319. 陆思达,高希光,宋迎东(2014). 基于有限元法的平纹编织C/SiC复合材料等效导热系数预测方法. 《航空动力学报》.
  320. 李龙彪,宋迎东(2014). 纤维增强陶瓷基复合材料单轴拉伸行为(英文). Proceedings of the 11th China-Japan Joint Conference on Composite Materials.
  321. 贾旭,胡绪腾,宋迎东(2014). 两种求解应力强度因子权函数方法的对比分析. 《机械设计与制造》.
  322. 吴志荣,胡绪腾,宋迎东(2014). 多轴随机载荷下的疲劳寿命估算方法. 《航空动力学报》.
  323. 吴志荣,胡绪腾,宋迎东(2014). 多轴载荷下缺口件的疲劳寿命估算方法. 《工程力学》.
  324. Xiguang Gao, Piaoyang Luo, Guoqiang Yu, Guangwu Fang, Yingdong Song (2014). Micro-XCT-based finite element method for prediction of elastic modulus of plane woven carbon fiber-reinforced ceramic matrix composites. Journal of Composite Materials.DOI
  325. Zhigang Sun, Xuming Niu, Zhenjian Wang, Yingdong Song, Xianqiao Wang (2014). Verification and prediction of residual strength of C/SiC composites under non-stress oxidation. Journal of Materials Science.DOI
  326. Zhe Wu, X.‐T. Hu, Zhuolun Li, Yingdong Song (2014). Evaluation of fatigue life for titanium alloy TC4 under variable amplitude multiaxial loading. Fatigue & Fracture of Engineering Materials & Structures.DOI
  327. Longbiao Li, Yingdong Song (2014). Fatigue Behavior of C/SiC Ceramic Matrix Composites at Room and Elevated Temperatures. Ceramic transactions /Ceramic transactions.DOI
  328. Zhigang Sun, Xuming Niu, Sh. Huang, Yingdong Song (2014). A Unified Macro- and Micromechanics Constitutive Model of Fully Coupled Fields. Mechanics of Composite Materials.DOI
  329. Zhigang Sun, Chunyuan Kong, Xuming Niu, Yingdong Song, Xianqiao Wang (2014). Optimization and Reliability Analysis of 2.5D C/SiC Composites Turbine Stator Vane. Applied Composite Materials.DOI
  330. L. B. Li, Yingdong Song, Yongjian Sun (2014). Modeling the Tensile Behavior of Unidirectional C/SiC Ceramic-Matrix Composites. Mechanics of Composite Materials.DOI
  331. 吴志荣,胡绪腾,辛朋朋,宋迎东(2013). 基于Chaboche模型的金属材料稳态循环应力-应变曲线的本构建模方法. 《机械工程材料》.
  332. 李龙,高希光,史剑,宋迎东(2013). 考虑孔隙的针刺C/SiC复合材料弹性参数计算. 《航空动力学报》.
  333. 孙志刚,王振剑,宋迎东(2013). 无应力氧化下C/SiC复合材料弹性性能模拟及验证. 《复合材料学报》.
  334. 胡绪腾,马晓健,宋迎东(2013). 含保载弹性应力循环下TA12钛合金缺口试样的蠕变疲劳损伤分析. 《机械工程材料》.
  335. 胡绪腾,宋迎东(2013). TC4钛合金三种动态本构模型的对比分析. 《兵器材料科学与工程》.
  336. 方光武,高希光,宋迎东(2013). 单向纤维增强陶瓷基复合材料界面滑移规律. 《复合材料学报》.
  337. 高希光,刘兴国,张华军,宋迎东(2013). 涡扇发动机涡轮后框架结构/材料一体化优化设计方法. 《航空动力学报》.
  338. 高希光,宋迎东 (2013). STRAIGHTFORWARD MULTI-SCALE BOUNDARY ELEMENT METHOD FOR GLOBAL/LOCAL MECHANICAL ANALYSIS OF ELASTIC HETEROGENEOUS MATERIAL. Transactions of Nanjing University of Aeronautics and Astronautics.
  339. 高希光,王绍华,宋迎东 (2013). SIMULATION OF COMPOSITE NON-LINEAR MECHANICAL BEHAVIOR OF CMCS BY FEM-BASED MULTI-SCALE APPROACH. Transactions of Nanjing University of Aeronautics and Astronautics.
  340. 胡绪腾,辛朋朋,宋迎东(2013). 基于最弱环理论的缺口件概率疲劳寿命预测方法. 《机械科学与技术》.
  341. Z. R. Wu, Xuteng Hu, Yingdong Song (2013). Multiaxial fatigue life prediction for titanium alloy TC4 under proportional and nonproportional loading. International Journal of Fatigue.DOI
  342. Chunyuan Kong, Zhigang Sun, Xuming Niu, Yingdong Song (2013). Moment methods for C/SiC woven composite components reliability and sensitivity analysis. Science and Engineering of Composite Materials.DOI
  343. Chunyuan Kong, Zhigang Sun, Xuming Niu, Yingdong Song (2013). Analytical model of elastic modulus and coefficient of thermal expansion for 2.5D C/SiC composite. Journal of Wuhan University of Technology-Mater Sci Ed.DOI
  344. Longbiao Li, Yingdong Song, Youchao Sun (2013). Effect of matrix cracking on hysteresis behavior of cross-ply ceramic matrix composites. Journal of Composite Materials.DOI
  345. Longbiao Li, Yingdong Song (2013). Estimate Interface Shear Stress of Woven Ceramic Matrix Composites from Hysteresis Loops. Applied Composite Materials.DOI
  346. Zhigang Sun, Long Zhao, Lei Chen, Yingdong Song (2013). Research on failure criterion of composite based on unified macro- and micro-mechanical model. Chinese Journal of Aeronautics.DOI
  347. Yingdong Song (2013). Calculation of needled C/SiC composite elastic parameters in consideration of the porosity. Journal of Aerospace Power.
  348. Yingdong Song (2013). Verification and prediction of elastic modulus of C/SiC composites under non-stress oxidation. Fuhe cailiao xuebao.
  349. Xuming Niu, Zhigang Sun, Chunyuan Kong, Yingdong Song (2013). DISPERSION OF ELASTIC MODULUS AND THE COEFFICIENT OF THERMAL EXPANSION OF 2.5D-C/SiC COMPOSITES. Composites Mechanics Computations Applications An International Journal.DOI
  350. Yingdong Song (2013). Creep-Fatigue Damage Analysis of TA12 Titanium Alloy Notched Sample at Elastic Stress Cycle with Dwell Time. Materials for Mechanical Engineering.
  351. 孙志刚,苗艳,宋迎东(2012). 考虑基体开裂的陶瓷基复合材料应力-应变曲线模拟方法及验证. 《航空动力学报》.
  352. 胡绪腾,宋迎东(2012). 外物损伤对风扇/压气机叶片高循环疲劳性能影响的研究. 《航空发动机》.
  353. 杨福树,孙志刚,李龙彪,高希光,宋迎东(2012). 界面脱粘对正交铺设SiC/CAS复合材料基体开裂的影响. 《复合材料学报》.
  354. 李龙彪,宋迎东,孙有朝(2012). 纤维增强陶瓷基复合材料疲劳迟滞行为(英文). 《第十届中日复合材料学术会议》.
  355. 孔春元,孙志刚,高希光,宋迎东(2012). 2.5维C/SiC复合材料经向拉伸性能. 《复合材料学报》.
  356. Yingdong Song (2012). Simulating and validating the stress-strain curve of the matrix cracking of ceramic matrix composite. Journal of Aerospace Power.
  357. Yingdong Song (2012). LCF life prediction for TC4 alloy notched specimens based on theory of critical distance. Journal of Aerospace Power.
  358. Yingdong Song (2012). Tensile property of 2.5D C/SiC composites in warp direction. Fuhe cailiao xuebao.
  359. Yingdong Song (2012). Influence of interface debonding on matrix cracking of cross-ply SiC/CAS composites. Fuhe cailiao xuebao.
  360. Yingdong Song (2012). Research on Effect of Foreign Object Damage on High Cycle Fatigue Performance for Fan/Compressor Blades. Aeroengine.
  361. Yingdong Song (2012). Low Cycle Tensile-Tensile Fatigue Life Prediction of Ceramic Matrix Composites.
  362. 高希光,宋迎东,朱如鹏,孙志刚,胡绪腾(2011). 航空发动机低压涡轮转子连接螺栓预紧力分析. 《机械科学与技术》.
  363. 孙杰,宋迎东,高希光,孙志刚(2011). 基于节点插值子胞模型的纺织复合材料力学性能预测(英文). Transactions of Nanjing University of Aeronautics and Astronautics.
  364. 杨福树,孙志刚,李龙彪,宋迎东(2011). 正交铺设陶瓷基复合材料基体裂纹演化研究(英文). Transactions of Nanjing University of Aeronautics and Astronautics.
  365. 李龙彪,宋迎东(2011). 纤维失效对陶瓷基复合材料准静态加卸载迟滞回线的影响(英文). Transactions of Nanjing University of Aeronautics and Astronautics.
  366. 周超羡,胡绪腾,吴志荣,马晓健,宋迎东(2011). FGH95粉末高温合金蠕变裂纹扩展有限元数值模拟研究. 《长春理工大学学报(自然科学版)》.
  367. 孙杰,宋迎东,孙志刚(2011). 复合材料导向叶片的结构与材料一体化优化设计. 《固体力学学报》.
  368. 孔春元,孙志刚,高希光,宋迎东(2011). 2.5维C/SiC复合材料单胞模型及刚度预测. 《航空动力学报》.
  369. 李龙彪,宋迎东,孙志刚(2011). 正交铺设陶瓷基复合材料单轴拉伸行为. 《复合材料学报》.
  370. Yingdong Song (2011). Unit cell of 2.5 dimension C/SiC and its stiffness prediction. Journal of Aerospace Power.
  371. Yingdong Song (2011). Finite Element Analysis of Creep Crack Growth in FGH95 Powder Metallurgy Superalloy. Journal of Changchun University of Science and Technology.
  372. 高希光,宋迎东,孙志刚,胡绪腾(2010). 基于多尺度方法的含基体裂纹纤维增强陶瓷基复合材料杆动力学响应计算(英文). Chinese Journal of Aeronautics.
  373. 孙志刚,李龙彪,朱彬,宋迎东(2010). 界面层参数对陶瓷基复合材料单轴拉伸行为的影响. 《航空动力学报》.
  374. 汤彬,孙志刚,高希光,宋迎东(2010). 单向陶瓷基复合材料阻尼计算方法. 《航空动力学报》.
  375. 李龙彪,宋迎东,孙志刚(2010). 单向陶瓷基复合材料单轴拉伸强度研究. 《航空动力学报》.
  376. Longbiao Li, Yingdong Song (2010). Influence of fiber failure on fatigue hysteresis loops of ceramic matrix composites. Journal of Reinforced Plastics and Composites.DOI
  377. Yingdong Song (2010). Effect of interface layer parameters on uniaxial tensile behavior of ceramic matrix composites. Journal of Aerospace Power.
  378. Yingdong Song (2010). Analytical method for estimating the damping in unidirectional ceramic matrix composites. Journal of Aerospace Power.
  379. Longbiao Li, Yingdong Song (2010). Estimate interface frictional coefficient of ceramic matrix composites from hysteresis loops. Journal of Composite Materials.DOI
  380. Sun Zhigang, Zhou Chaoxian, Xiguang Gao, Song Yingdong (2010). A Quadrilateral Element-based Method for Calculation of Multi-scale Temperature Field. Chinese Journal of Aeronautics.DOI
  381. 李龙彪,宋迎东,孙志刚,孙杰(2009). 纤维泊松收缩对陶瓷基复合材料疲劳迟滞回线的影响. 《南京航空航天大学学报(自然科学版)》.
  382. 孙杰,孙志刚,宋迎东,高希光(2009). 基于高精度通用单胞模型的材料细观结构拓扑优化设计. 《航空学报》.
  383. 孙志刚,高希光,上官莉英,宋迎东(2009). 无虚拟节点罚函数位移协调法. 《南京航空航天大学学报(自然科学版)》.
  384. 孙志刚,宋迎东,苗艳,李龙彪(2009). 陶瓷基复合材料基体随机开裂的损伤模拟. 《复合材料学报》.
  385. 孙志刚,宋迎东,高希光,苗艳(2009). 三维颗粒增强复合材料细观温度场计算. 《航空动力学报》.
  386. 刘存,孙志刚,胡绪腾,宋迎东(2009). 某型发动机第2级涡轮叶片低循环疲劳寿命分析. 《航空发动机》.
  387. 宋迎东,孙杰,孙志刚,高希光(2009). 基于遗传算法的复合材料细观结构拓扑优化设计. 《固体力学学报》.
  388. 李龙彪,宋迎东,孙志刚(2009). 界面脱粘对陶瓷基复合材料疲劳迟滞回线的影响. 《固体力学学报》.
  389. Longbiao Li, Yingdong Song (2009). An Approach to Estimate Interface Shear Stress of Ceramic Matrix Composites from Hysteresis Loops. Applied Composite Materials.DOI
  390. Yingdong Song (2009). Research on multi-axial fatigue test loading spectrum formation based on damage equivalent principle. Journal of Aerospace Power.
  391. Yingdong Song (2009). Multi-axial Fatigue Life Prediction Model in Elliptic Equation Form.
  392. Song Yingdong (2009). Analysis of Low Cycle Fatigue Life for Second-stage Turbine Blade of an Aeroengine. Aeroengine.
  393. 高希光,宋迎东,孙志刚(2008). 陶瓷基复合材料高精度宏细观统一本构模型研究. 《航空动力学报》.
  394. 黄寿伟,宋迎东(2008). 某型发动机附件传动机匣应力分析. 《航空发动机》.
  395. 张鸿,宋迎东(2008). 陶瓷基复合材料单纤维拔出过程分析. 《材料科学与工程学报》.
  396. 李龙彪,宋迎东,孙志刚(2008). 纤维泊松收缩对陶瓷基复合材料基体裂纹演化影响. 《航空动力学报》.
  397. 许仁红,宋迎东,李龙彪,孙志刚(2008). 准静态加载下陶瓷基复合材料层合板应力-应变曲线的模拟. 《航空动力学报》.
  398. Xiguang Gao, Yingdong Song, Zhigang Sun (2008). Quadrilateral Subcell Based Finite Volume Micromechanics Theory for Multiscale Analysis of Elastic Periodic Materials. Journal of Applied Mechanics.DOI
  399. Dan Fang, Zhaofeng Chen, Yingdong Song, Zhigang Sun (2008). Morphology and microstructure of 2.5 dimension C/SiC composites ablated by oxyacetylene torch. Ceramics International.DOI
  400. Yingdong Song (2008). Essential characteristic of foreign object damage tolerance design for airfoils in aeroengine and development of design criteria. Journal of Aerospace Power.
  401. Yingdong Song (2008). Analysis of Single Fiber Pull-out Process on Ceramic Matrix Composites. Cailiao kexue yu gongcheng xuebao.
  402. Yingdong Song (2008). Stress Analysis of Accessory Gearbox for an Aeroengine. Aeroengine.
  403. 刘波,雷友锋,宋迎东(2007). 纤维增强复合材料宏观与细观统一的细观力学模型. 《航空发动机》.
  404. 张鸿,宋迎东(2007). 陶瓷基复合材料单纤维拔出力学分析. 《航空动力学报》.
  405. 张鸿,宋迎东(2007). 陶瓷基复合材料基体裂纹偏转能量释放率研究. 《航空动力学报》.
  406. Yingdong Song (2007). Study of energy release rates for crack deflection of ceramic matrix composites. Journal of Aerospace Power.
  407. Yingdong Song (2007). Mechanical analysis of single fiber pull-out on ceramic matrix composites. Journal of Aerospace Power.
  408. Yingdong Song (2007). TOTAL STRAIN VERSION OF STRAIN ENERGY PARTITIONING. Chinese Journal of Mechanical Engineering.
  409. 孙志刚,宋迎东,高德平(2005). 改进的二维高精度通用单胞模型. 《固体力学学报》.
  410. 高希光,宋迎东,孙志刚(2005). 纤维尺寸随机引起的复合材料性能分散性研究. 《材料科学与工程学报》.
  411. 孙志刚,宋迎东,廉英琦(2005). 弱界面粘结对复合材料有效性能的影响. 《航空动力学报》.
  412. 赵勇铭,宋迎东(2005). 夹杂对粉末高温合金裂纹扩展寿命的影响. 《航空动力学报》.
  413. 高希光,宋迎东,孙志刚(2005). 纤维位置随机引起的复合材料性能分散性研究. 《航空动力学报》.
  414. 陈勇,宋迎东,高德平,范绪箕(2005). 热、机械载荷作用下夹杂对应力强度因子的影响. 《计算力学学报》.
  415. 孙志刚,宋迎东,高德平(2005). 纤维增强复合材料细观温度场计算. 《航空动力学报》.
  416. 宋迎东,孙志刚,高希光(2005). 纤维增强复合材料有效性能分散性. 《航空动力学报》.
  417. Yingdong Song (2005). Modified Strain range Partitioning Method. Journal of Aerospace Power.
  418. Yingdong Song (2005). Influence of Inclusions on Crack Growth Life of Powder Metallurgy. Journal of Aerospace Power.
  419. 孙志刚,宋迎东,高希光,高德平(2004). 细观结构对复合材料热膨胀系数的影响研究. 《应用力学学报》.
  420. 宋迎东,孙志刚,雷友锋,高德平(2004). 细观几何结构对复合材料初始屈服面的影响. 《航空动力学报》.
  421. 陈勇,宋迎东,高德平(2004). FGH95粉末高温合金裂纹闭合数值模拟. 《材料科学与工程学报》.
  422. 孙志刚,宋迎东,高德平(2004). 考虑界面时细观几何结构对复合材料力学性能的影响. 《材料科学与工程学报》.
  423. 雷友锋,宋迎东,高德平(2003). 纤维增强金属基复合材料细观几何结构对宏观弹性性能的影响. 《宇航材料工艺》.
  424. 宋迎东,雷友锋,孙志刚,高德平(2003). 一种新的纤维增强复合材料细观力学模型. 《南京航空航天大学学报(自然科学版)》.
  425. 雷友锋,宋迎东,高德平(2003). 纤维增强金属基复合材料弹塑性行为分析. 《机械科学与技术》.
  426. 宋迎东,高德平,杨治国(2002). 粉末高温合金粘塑性试验评定与本构模型参数估计. 《航空学报》.
  427. 宋迎东,高德平(2002). 定向凝固合金涡轮叶片的低周疲劳寿命研究. 《机械工程材料》.
  428. 雷友锋,宋迎东,高德平,程卫华(2002). 纤维增强复合材料结构的宏细观一体化分析方法. 《机械科学与技术》.
  429. 宋迎东,高德平(2000). 发动机持久/蠕变载荷谱的编制. 《南京航空航天大学学报(自然科学版)》.
  430. 宋迎东,高德平(2000). 发动机航线类综合载荷谱研究. 《推进技术》.
  431. 宋迎东,王舸,高德平(2000). 一种弹-粘塑性本构模型材料常数的估计方法. 《固体力学学报》.
  432. 宋迎东,高德平(1999). 航空发动机设计任务循环的选取. 《航空学报》.
  433. 宋迎东,高德平(1999). 粉末冶金与常规高温合金构件应力与疲劳寿命对比. 《机械工程材料》.
  434. 宋迎东,高德平(1998). 基于夹杂物分布的粉末冶金盘疲劳定寿的概率方法. 《航空发动机》.
  435. 宋迎东(1997). 教练机发动机设计载荷谱推导方法. 《推进技术》.
  436. 宋迎东,温卫东,陈伟,高德平(1997). 粉末高温合金应变率及循环特性的试验研究. 《南京航空航天大学学报(自然科学版)》.
  437. 宋迎东(1997). 航空发动机飞行载荷谱的预测. 《航空动力学报》.
  438. 宋迎东,高德平(1997). 评述 B-P 统一弹-粘塑性本构模型. 《南京航空航天大学学报(自然科学版)》.
  439. 宋迎东,高德平,尚伟钧(1996). 航空发动机设计任务循环预测的计算机程序设计. 《航空动力学报》.
  440. 陈伟,尹晶,宋迎东,高德平(1996). 平板叶片斜撞击瞬态响应的计算分析. 《南京航空航天大学学报(自然科学版)》.

预印本

  1. Siyu Liu, Wenping Liang, Qiang Miao, Peiyan Huang, Shi Yang, Yu Fang, Xinyue You, Jifang Miao, Yinghu Wang, Jianyan Xu, Yingdong Song (2026). Influence of Laser Energy Density on FeCoCrNiMo High-Entropy Alloy Coatings: From Grain-Structure Evolution to Wear-Mechanism Transition. SSRN Electronic Journal.DOI
  2. Xinyue You, Zhengao Sun, Qiang Miao, Wenping Liang, Peiyan Huang, Siyu Liu, Yu Fang, Yi Guo, Hui Yu, Yinghu Wang, Jianyan Xu, Yingdong Song (2026). Wear Performance of CrFeAlMoTi High-Entropy Alloy Coatings Fabricated with Varying Laser Scanning Speeds: Strengthening and Wear Mechanisms. SSRN Electronic Journal.DOI
  3. Yu Fang, Wenping Liang, Qiang Miao, Peiyan Huang, Siyu Liu, Xinyue You, Jifang Miao, Bingru Cheng, Yinghu Wang, Jianyan Xu, Yingdong Song (2026). The influence of laser energy density on microstructure and wear resistance of Fe20Cr20Ni50V4Al2Nb4 high‑entropy alloy coatings fabricated by laser cladding. SSRN Electronic Journal.DOI
  4. Peiyan Huang, Qiang Miao, Wenping Liang, Jianyan Xu, Shi Yang, Xinyue You, Siyu Liu, Yu Fang, Jifang Miao, Yinghu Wang, Yingdong Song (2026). Controlling laser energy density in NbMoTaW refractory high-entropy alloy protective coatings: mechanisms of multi-physics fields, microstructure evolution, and residual stress. SSRN Electronic Journal.DOI
  5. Xiaoxiao Qiu, Guoqiang Yu, Yi-Cheng Chen, Weihao Zhang, Runjie Chen, Yan Zhong, Deng Yangfang, Yuzhou Shen, Xiguang Gao, Yingdong Song (2026). Investigation on the friction and wear behavior and residual mechanical properties of Al2O3/Al2O3 sliding against GH3128 alloy. SSRN Electronic Journal.DOI
  6. Xuming Niu, Xiangqian Fan, Yue Liu, Zhigang Sun, Yingdong Song (2026). A Coupled Damage Model Based on the Critical Plane Method for Multiaxial Low–High Cycle Combined Fatigue and its Experimental Verification. SSRN Electronic Journal.DOI
  7. Yu Fang, Wenping Liang, Qiang Miao, Peiyan Huang, Siyu Liu, Xinyue You, Jifang Miao, Bingru Cheng, Yinghu Wang, Jianyan Xu, Yingdong Song (2026). The influence of laser energy density on microstructure and mechanical properties of Fe20Cr20Ni50V4Al2Nb4 high‑entropy alloy coatings fabricated by laser cladding. SSRN Electronic Journal.DOI
  8. Xiaojun Guo, Xu Jia, 恒 曹, Y. Chen, Rong Jiang, Yingdong Song (2025). Influence of post-impact heat treatment on the high cycle fatigue behavior of GH4169 alloy.DOI
  9. Yang Zhao, Rong Jiang, Zhipeng Li, Yingdong Song (2025). The influence of strain ratio on high temperature LCF life prediction of turbine disc alloy using crystal plasticity and 3D representative volume element.DOI
  10. Tao Wu, Jianyu Xu, Sheng Zhang, Qiang Chen, Xiguang Gao, Yingdong Song, Fang Wang (2025). Preform-structure integrated strength analysis of ceramic matrix composite blade shroud. SSRN Electronic Journal.DOI
  11. L. Zhang, Liujun Lu, Yuzhuo Wang, Weilong Li, Zhi-wei Yu, Xingling Luo, Rong Jiang, Liguo Zhao, Yingdong Song (2024). Thermo-Mechanical Fatigue Behavior of an Additively Manufactured Nickel-Based Superalloy. SSRN Electronic Journal.DOI
  12. Xu Sheng Zhao, Kaiwen Wang, Xuming Niu, Zhigang Sun, Yingdong Song (2023). An enhanced fatigue residual life prediction model based on fatigue driving stress by considering loading interaction effects.DOI
  13. Meijing Dong, Wenping Liang, Qiang Miao, Huijun Zhao, Ruixiang Liu, Rongxue Yan, Kai Zang, Wei Feng Yao, Xiguang Gao, Yingdong Song (2023). Doped Effect of Yb on Enhancing Resistance to Calcium-Magnesium-Alumina-Silicate Corrosion of Sm2(Zr0.7ce0.3)2o7. SSRN Electronic Journal.DOI
  14. Yuanyuan Sun, Qiang Miao, Wenping Liang, Jinwei Yi, Jianyan Xu, Manoj Kumar Gupta, Yan Qi, Feilong Jia, Xiguang Gao, Yingdong Song (2023). Wear-Resistant Zrn/Ti Functionally Graded Coating Prepared on Ta18 Alloy by Double Glow Plasma Alloying. SSRN Electronic Journal.DOI
  15. Xu Sheng Zhao, Xuming Niu, Yingdong Song, Zhigang Sun (2022). Modeling the creep deformation and damage evolution of superalloy GH4169: Application of a novel damage constitutive model based on continuum damage mechanics.DOI

书籍章节

  1. Lu Zhang, Xianqing Chen, Hailang Ge, Xiguang Gao, Yingdong Song (2025). Optimization of Mechanical Properties for CMC-Metal Bolted Connections at High Temperature. Springer aerospace technology.DOI
  2. Xiao Dong Han, Xiguang Gao, Yingdong Song (2017). Parameters Identification of Interface Friction Model for Ceramic Matrix Composites Based on Stress-Strain Response. Applied Composite Materials.DOI

此主页由公开资料整理,尚未经学者本人认领。