左曙光

期刊论文

1. 康强，李欢，左曙光，吴旭东，刘康，景晶（2026）. 汽车车内噪声源定位与贡献量分析. 《噪声与振动控制》.
2. Teng Ma, Shuguang Zuo, Xudong Wu, Bin Yin (2026). Analysis and Suppression of Abnormal Electromagnetic Noise in Permanent Magnet Synchronous Motor With Misaligned Hall Sensors. Journal of Vibration Engineering & Technologies.DOI
3. Shuguang Zuo, Ye Cui, Yuhao Zhang (2026). Fault Detection in Unbalanced Data of Brushed DC Motor Worm and Helical Gears for Automotive Applications Based on CNN-LSTM-Attention. IEEE International Conference on Mechatronics and Automation (ICMA).DOI
4. Shuguang Zuo, Yaohui Gao, Teng Ma (2026). Mechanism Analysis and Improvement of Harmonic Current Extraction for Multiple Virtual Winding Systems Under Non-Stationary Conditions. IEEE International Conference on Mechatronics and Automation (ICMA).DOI
5. Huan Li, Shuguang Zuo, Shanran Li, XuDong Wu (2026). A novel predictive model for surge limit of air supply systems in fuel cell vehicles. Journal of the Brazilian Society of Mechanical Sciences and Engineering.DOI
6. Teng Ma, Shuguang Zuo, Xudong Wu (2026). Modeling and analysis of nonsinusoidal back electromotive force effect on electromagnetic noise in permanent magnet synchronous motors. Journal of Vibration and Control.DOI
7. Haijun Zhuang, Shuguang Zuo, Zhixun Ma, Bin Yin, Chang Liu (2026). Quantitative Analysis of Modulation Effect of Rotor Magnetic Bridge Saturation on Electromagnetic Torque in Interior Permanent Magnet Synchronous Machines. IEEE Transactions on Transportation Electrification.DOI
8. 康强，李欢，左曙光，吴旭东（2025）. 基于底盘测功机测试的汽车道路噪声模拟与适用性研究. 《中国工程机械学报》.DOI
9. 金铭心，左曙光，吴旭东，李姗然（2025）. 考虑剥落缺陷的斜齿轮时变啮合刚度解析计算方法（英文）. 《同济大学学报(自然科学版)》.
10. 康强，景晶，左曙光，黄程翔，江中益（2025）. 环境温度对汽车路噪影响的测试及分析. 《中国工程机械学报》.DOI
11. Haijun Zhuang, Shuguang Zuo, Zhixun Ma, Bin Yin, Chang Liu (2025). Non-Zeroth-Mode Vibroacoustic Analysis of Integer-Slot Multipole Permanent Magnet Synchronous Motors. IEEE Transactions on Transportation Electrification.DOI
12. Panxue Liu, Lihui Chen, Xudong Wu, Shuguang Zuo, Shuiwen Shen (2025). Compact phononic crystal ducts with periodic helmholtz mufflers and integrated thin plates for low-frequency broadband noise control. Applied Acoustics.DOI
13. Jirong Yu, Shuguang Zuo, Bin Yin, Haijun Zhuang (2025). Topological Synthesis Methodology of Symmetrical Winding Configurations for Multi-phase Pole-Phase Modulation Motors. IEEE International Conference on Mechatronics and Automation (ICMA).DOI
14. Haijun Zhuang, Shuguang Zuo, Zhengnan Wu (2025). Analytical Modeling of Interior Permanent Magnet Mators Considering Rotor Magnetic Bridge Saturation. IEEE International Conference on Mechatronics and Automation (ICMA).DOI
15. Shanran Li, Shuguang Zuo, Bin Yin, Mingxin Jin, Huan Li, Chang Liu, Lei Shi (2025). A new method for analyzing gearbox vibration and noise in electric drive systems based on different modal forms. Journal of Vibration and Control.DOI
16. Huan Li, Shuguang Zuo, Xudong Wu, Siyue Chen, Panxue Liu (2025). A finite element-analytical method for optimization of micro-perforated mufflers in electric two-stage centrifugal compressors considering inhomogeneous temperature. Applied Acoustics.DOI
17. Ming-Xin Jin, Shuguang Zuo, Xudong Wu, Shangwen Li, Huan Li, Lei Shi, Yousong Chen (2024). Multistage operation transfer path analysis of an electric vehicle based on the regularization of total least squares. Mechanical Systems and Signal Processing.DOI
18. Chang Liu, Shuguang Zuo, Xudong Wu, Bin Yin, Haijun Zhuang, Shichen Wang (2024). Torque Ripple Reduction of Permanent Magnet-Assisted Synchronous Reluctance Motors Based on Equivalent Slotting Effect and Auxiliary Flux Barriers. IEEE Transactions on Transportation Electrification.DOI
19. Teng Ma, Shuguang Zuo, Bin Yin, Haijun Zhuang, Chang Liu (2024). An Efficient Identification Method for Orthotropic Material Parameters of Stator Cores With Arbitrary Structures Based on General Surrogate Model. IEEE Transactions on Energy Conversion.DOI
20. Huan Li, Shuguang Zuo, Siyue Chen (2024). Analytical modeling and performance improvement of an electric two-stage centrifugal compressor for fuel cell vehicles. Proceedings of the Institution of Mechanical Engineers Part A Journal of Power and Energy.DOI
21. Haijun Zhuang, Shuguang Zuo, Zhixun Ma, Bin Yin, Chang Liu (2024). Novel Effective Torque Analysis Method for Interior Permanent Magnet Synchronous Machines. IEEE Transactions on Transportation Electrification.DOI
22. Huan Li, Shuguang Zuo, Siyue Chen (2024). Objective sound quality evaluation of the electric two-stage centrifugal compressor for fuel cell vehicles-experimental investigations. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering.DOI
23. Shuguang Zuo, Qingshao Mao (2024). A Method for Identifying the Noise Characteristics of an Electric Motor System Based on Tests Conducted under Distinct Operating Conditions. SAE technical papers on CD-ROM/SAE technical paper series.DOI
24. Mingxin Jin, Shuguang Zuo, Lei Shi, Qingshao Mao (2024). Experimental Analysis on Noise and Vibration of Electric Drive System Focusing on Order Contribution Ratio. SAE technical papers on CD-ROM/SAE technical paper series.DOI
25. 左曙光，罗莹（2023）. 一种用于主动磁轴承不平衡补偿的切换控制法. 《机电产品开发与创新》.
26. Panxue Liu, Shuguang Zuo, Xudong Wu, MingXin Jin (2023). Research on tunable bandgap characteristics of the phononic crystal duct with piezoelectric thin plates for the broad noise reduction. Applied Acoustics.DOI
27. Zeli Yang, Shuguang Zuo (2023). Vibration analysis of a six-degree-of-freedom rotor supported on two different deep groove ball bearings with waviness on races. NOISE-CON proceedings.DOI
28. Shuguang Zuo, Wenping Zong, Huan Li, Xudong Wu (2023). Static performance analysis of gas foil thrust bearings under inclined thrust disc considering the slip flow effect. NOISE-CON proceedings.DOI
29. Shanran Li, Shuguang Zuo, Panxue Liu, Huan Li (2023). Reverse design of involute helical gear pairs considering machining errors based on IMAGEWARE and HYPERMESH. NOISE-CON proceedings.DOI
30. Chang Liu, Shuguang Zuo, Zhipeng Wu, Siyue Chen, Bin Yin, Haijun Zhuang, Shichen Wang (2023). Analytical Calculation of Magnetic Field and Electromagnetic Performance for Permanent Magnet Assisted Synchronous Reluctance Motors Considering Saturation Effect. IEEE Transactions on Energy Conversion.DOI
31. Shuguang Zuo, Dawei Zhou, Luyao Fu, Panxue Liu (2023). Thermal failure analysis and control algorithm improvement for the active controlled mount with consideration of thermal–magnetic coupling. ISA Transactions.DOI
32. Shuguang Zuo, Bin Yin, Xiaorui Hu, Panxue Liu (2023). Motor Stator Modeling and Equivalent Material Parameters Identification for Electromagnetic Noise Calculation. SAE technical papers on CD-ROM/SAE technical paper series.DOI
33. Haijun Zhuang, Shuguang Zuo, Zhixun Ma, Qiang Yu, Zhipeng Wu, Chang Liu (2023). Analytical Modeling of Open-Circuit Air-Gap Flux Density in Interior Permanent Magnet Machine. IEEE Transactions on Magnetics.DOI
34. Huan Li, Shuguang Zuo, Xudong Wu, Shanran Li, Wenping Zong (2023). Modeling and Study on Static Performance of the Double-Top-Foil Air Foil Journal Bearing for Air Compressors in Fuel Cell Vehicles. SAE technical papers on CD-ROM/SAE technical paper series.DOI
35. Shuguang Zuo, Bin Yin, Fan li, Panxue Liu (2023). Noise Reduction Method of Induction Motor Based on Periodic Signal-Based Modulation Considering Frequency Band Characteristics of Electromagnetic Force. SAE technical papers on CD-ROM/SAE technical paper series.DOI
36. Panxue Liu, Shuguang Zuo, Xudong Wu, Bin Yin, Shanran Li (2023). Acoustic and Aerodynamic Performances of One Phononic Crystal Duct with Periodic Mufflers. SAE technical papers on CD-ROM/SAE technical paper series.DOI
37. Shuguang Zuo, Zhiyong Huang, Zhipeng Wu, Chang Liu (2023). Improved Mathematical Model and Modeling of Permanent Magnet Synchronous Motors Considering Saturation, Spatial Harmonics, Iron Loss and Deadtime Effect. Arabian Journal for Science and Engineering.DOI
38. Shanran Li, Shuguang Zuo, Ying She Luo, Zhiyong Huang (2023). An improved load distribution model for involute helical gear pairs considering an actual contact ratio. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
39. Shuguang Zuo, Zhiyong Huang (2023). Analysis of torque ripple and torsional vibration considering Hall mounting errors in permanent magnet synchronous motors for light EVs. Electrical Engineering.DOI
40. 熊云，左曙光，董志亮，陈思越（2022）. 考虑逆变器死区的轮毂永磁同步电机电流谐波解析建模与分析. 《时代汽车》.
41. Shuguang Zuo, Zhiyong Huang (2022). Analytical model of electromagnetic torque of surface PM motors considering current harmonicsin electric vehicles. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering.DOI
42. Haijun Zhuang, Shuguang Zuo, Zhixun Ma, Qiang Yu, Zhipeng Wu, Chang Liu (2022). Magnetic Analysis of Skew Effect in Surface-Mounted Permanent Magnet Machines With Skewed Slots. IEEE Transactions on Magnetics.DOI
43. Panxue Liu, Shuguang Zuo, Xudong Wu, Siyue Chen, Yi Kong (2022). Acoustic attenuation characteristics of the muffler phononic crystal with hybrid resonators. International Journal of Mechanical Sciences.DOI
44. Zequn Nan, Matthias Behrendt, Katharina Bause, Albert Albers, Xuezhe Wei, Tiancai Ma, Weikang Lin, Shuguang Zuo (2022). Method to investigate the short-term effects of vibration on the output performance of the proton exchange membrane fuel cell in fuel cell vehicles. Energy Conversion and Management.DOI
45. Bin Yin, Shuguang Zuo, Yulin Xu, Shengpeng Chen (2022). Performance of liquid cooling battery thermal management system in vibration environment. Journal of Energy Storage.DOI
46. Zhipeng Wu, Shuguang Zuo, Zhiyong Huang, Xiaorui Hu, Siyue Chen, Chang Liu, Haijun Zhuang (2022). Effect of Hall Errors on Electromagnetic Vibration and Noise of Integer-Slot Inset Permanent Magnet Synchronous Motors. IEEE Transactions on Transportation Electrification.DOI
47. Shuguang Zuo, Panxue Liu, Xudong Wu, Qi Zhang, Yi Kong, Dawei Zhou (2022). Study on broad flexural wave bandgaps of piezoelectric phononic crystal plates for the vibration and noise attenuation. Thin-Walled Structures.DOI
48. Siyue Chen, Shuguang Zuo, Zhipeng Wu, Chang Liu (2022). Comprehensive vibro-acoustic characteristics and mathematical modeling of electric high-speed centrifugal compressor surge for fuel cell vehicles at various compressor speeds. Mechanical Systems and Signal Processing.DOI
49. Shuguang Zuo, Shengpeng Chen, Bin Yin (2022). Performance analysis and improvement of lithium-ion battery thermal management system using mini-channel cold plate under vibration environment. International Journal of Heat and Mass Transfer.DOI
50. Zhipeng Wu, Shuguang Zuo, Siyue Chen (2022). Accurate Modeling of PMSM Considering Orthotropic Material Parameters of Stator System for Vibroacoustic Prediction. SAE technical papers on CD-ROM/SAE technical paper series.DOI
51. Siyue Chen, Shuguang Zuo, Zhipeng Wu, Chang Liu (2022). Dynamic Modeling of Fuel Cell Air Management System and Influence Analysis of Motor Torque Ripple. SAE technical papers on CD-ROM/SAE technical paper series.DOI
52. Luyao Fu, Shuguang Zuo, Dawei Zhou (2022). Analysis on Irreversible Demagnetization Condition of Linear Oscillatory Actuator with Moving Magnets. SAE technical papers on CD-ROM/SAE technical paper series.DOI
53. Zhiyong Huang, Shuguang Zuo (2022). Separation of Average Torque and Torque Ripple in PMSMs Considering Saturation, Cross-Coupling and Flux Harmonics Using Frozen Permeability Method. SAE technical papers on CD-ROM/SAE technical paper series.DOI
54. Chang Liu, Shuguang Zuo, Xiaorui Hu, Siyue Chen, Zhipeng Wu (2022). Analytical Modeling of Open-Circuit Magnetic Field in Permanent Magnet Assisted Synchronous Reluctance Motors Considering Iron Bridge Saturation Effects. SAE International Journal of Advances and Current Practices in Mobility.DOI
55. Zhipeng Wu, Shuguang Zuo, Xiaorui Hu, Shenglong Hu, Siyue Chen, Chang Liu (2022). Modeling and analysis of electromagnetic force in interior permanent magnet synchronous motor used for electric vehicles. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
56. Zhipeng Wu, Shuguang Zuo, Zhiyong Huang, Xiaorui Hu, Siyue Chen, Chang Liu (2022). Modelling, Calculation and Analysis of Electromagnetic Force and Vibroacoustic Behavior of Integer-Slot Permanent Magnet Synchronous Motor Considering Current Harmonics. Journal of Vibration Engineering & Technologies.DOI
57. 左曙光，李凡，胡潇睿（2021）. 考虑变频器供电影响的异步电机电磁噪声特性分析. 《机电一体化》.DOI
58. 左曙光（2021）. 车用同步电机噪声与振动. 《机械工业出版社》.
59. 熊云，左曙光，董志亮，陈思越（2021）. 燃料电池车用宽频带多腔体微穿孔消声器设计及试验研究. 《新型工业化》.DOI
60. Chang Liu, Shuguang Zuo, Shenglong Hu, Shenghan Qu, Zhipeng Wu (2021). Quasi-3-D Nonlinear Analytical Modeling of Magnetic Field in Axial-Flux Switched Reluctance Motors. IEEE Transactions on Magnetics.DOI
61. Zhipeng Wu, Shuguang Zuo, Shenglong Hu, Xiaorui Hu, Siyue Chen, Chang Liu (2021). Electromagnetic torque prediction and harmonic reduction of interior permanent magnet synchronous motor for electric vehicles using an analytical method. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering.DOI
62. Wenzhe Deng, Shuguang Zuo, Wei Chen, Zhe Qian, Cheng Qian, Wenping Cao (2021). Comparison of Eccentricity Impact on Electromagnetic Forces in Internal- and External-Rotor Permanent Magnet Synchronous Motors. IEEE Transactions on Transportation Electrification.DOI
63. Wenzhe Deng, Shuguang Zuo (2021). Analysis of the Sideband Electromagnetic Noise in Permanent Magnet Synchronous Motors Generated by Rotor Position Error. IEEE Transactions on Industrial Electronics.DOI
64. Xudong Wu, Yi Kong, Shuguang Zuo, Panxue Liu (2021). Research on multi-band structural noise reduction of vehicle body based on two-degree-of-freedom locally resonant phononic crystal. Applied Acoustics.DOI
65. Siyue Chen, Shuguang Zuo, Zhipeng Wu (2021). Aerodynamic Performance Modeling of the Centrifugal Compressor and Stability Analysis of the Compression System for Fuel Cell Vehicles. SAE International Journal of Advances and Current Practices in Mobility.DOI
66. Zhipeng Wu, Shuguang Zuo, Siyue Chen (2021). Analytical Modeling and Calculation of Electromagnetic Torque of Interior Permanent Magnet Synchronous Motor Considering Ripple Characteristics. SAE International Journal of Advances and Current Practices in Mobility.DOI
67. Xiaorui Hu, Shuguang Zuo, Fan Li (2021). Multi-physics Modeling of Electromagnetically Excited Acoustic Noise of Induction Motor. SAE technical papers on CD-ROM/SAE technical paper series.DOI
68. Shuguang Zuo, Bin Yin, Yulin Xu, Xudong Wu, Yiming Li, Jie Wang (2021). A simplified method of soft connected battery module for finite element method model of battery pack. International Journal of Energy Research.DOI
69. Conggan Ma, Jingjing Zhang, Jianfeng Wang, Na Yang, Qinghe Liu, Shuguang Zuo, Xudong Wu, Puwei Wang, Jiaming Li, Jianguang Fang (2021). Analytical Model of Open-Circuit Air-Gap Field Distribution in Interior Permanent Magnet Machines Based on Magnetic Equivalent Circuit Method and Boundary Conditions of Macroscopic Equations. IEEE Transactions on Magnetics.DOI
70. Siyue Chen, Shuguang Zuo, Kaijun Wei (2021). Numerical Investigation of the Centrifugal Compressor Stability Improvement by Half Vaned Low Solidity Diffusers. Journal of Thermal Science.DOI
71. 左曙光，潘健，吴旭东，冯朝阳（2020）. 考虑动圈偏心的电动振动台等效电磁力计算方法. 《西安交通大学学报》.
72. 周大为，左曙光，吴旭东，王珺（2020）. 考虑变刚度解耦膜的液压悬置动特性快速预测模型. 《华南理工大学学报(自然科学版)》.
73. Xiaorui Hu, Shuguang Zuo (2020). Modeling of electromagnetically excited noise and vibration of induction motor. The Journal of the Acoustical Society of America.DOI
74. Shuguang Zuo, Xiaorui Hu, Duoqiang Li, Yu Mao, Zhipeng Wu, Yun Xiong (2020). Analysis and Suppression of Longitudinal Vibration of Electric Wheel System Considering Rotor Position Error. IEEE Transactions on Transportation Electrification.DOI
75. Zhipeng Wu, Shuguang Zuo, Shenglong Hu, Xiaorui Hu (2020). Analytical modelling of air‐gap magnetic field of interior permanent magnet synchronous motors. IET Electric Power Applications.DOI
76. Siyue Chen, Shuguang Zuo, Kaijun Wei (2020). Experimental and numerical investigations on the acoustic characteristics and unsteady behaviors of a centrifugal compressor for fuel cell vehicles. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
77. Panxue Liu, Shuguang Zuo, Xudong Wu, Lingzhou Sun, Qi Zhang (2020). Study on the vibration attenuation property of one finite and hybrid piezoelectric phononic crystal beam. European Journal of Mechanics - A/Solids.DOI
78. Shuguang Zuo, Zexu Liu, Shenglong Hu (2020). Vibration reduction of switched reluctance motor under static eccentricity with optimised current harmonic. IET Electric Power Applications.DOI
79. Shuguang Zuo, Panxue Liu, Xudong Wu, Lingzhou Sun, Qi Zhang (2020). Optimization of the Finite Hybrid Piezoelectric Phononic Crystal Beam for the Low-Frequency Vibration Attenuation. SAE technical papers on CD-ROM/SAE technical paper series.DOI
80. Shenglong Hu, Shuguang Zuo, Xiaorui Hu (2020). Analysis of Vibroacoustic Behaviors and Torque Ripple of SRMs with Different Phases and Poles. SAE technical papers on CD-ROM/SAE technical paper series.DOI
81. Shenglong Hu, Shuguang Zuo, Mingtian Liu, Hao Wu, Zexu Liu (2020). Modeling and analysis of radial electromagnetic force and vibroacoustic behaviour in switched reluctance motors. Mechanical Systems and Signal Processing.DOI
82. Shuguang Zuo, Zexu Liu, Shenglong Hu (2020). Influence of Rotor Eccentricity on Radial Electromagnetic Force Characteristics in Switched Reluctance Motors and Compensation. Electric Power Components and Systems.DOI
83. Xudong Wu, Yiming Li, Shuguang Zuo (2020). The study of a locally resonant beam with aperiodic mass distribution. Applied Acoustics.DOI
84. Panxue Liu, Shuguang Zuo, Xudong Wu, Minghai Zhang (2020). A method for determining the minimum period number in finite locally resonant phononic crystal beams. Journal of Vibration and Control.DOI
85. Conggan Ma, Jiaming Li, Huichao Zhao, Jinhao Wang, Xiangrui Yin, Shuguang Zuo, Xudong Wu, Haifeng Lu (2020). 3-D Analytical Model of Armature Reaction Field of IPMSM With Multi-Segmented Skewed Poles and Multi-Layered Flat Wire Winding Considering Current Harmonics. IEEE Access.DOI
86. 康强，顾鹏云，李洁，左曙光（2019）. 电动汽车电驱动高频啸叫噪声评价方法研究. 《汽车工程》.DOI
87. 周大为，左曙光，刘敬芳，吴旭东（2019）. 燃料电池车用可调频微穿孔消声器试验研究. 《汽车工程》.DOI
88. 康强，顾鹏云，左曙光（2019）. 纯电动汽车电驱动总成悬置设计原则研究. 《汽车工程》.DOI
89. 左曙光，来艳，王卓周，林羽，胡潇睿（2019）. 考虑电传动矿用自卸车平顺性的油气弹簧结构参数设计. 《机电一体化》.
90. 吴旭东，张茗海，左曙光，刘盼学，孙铃洲（2019）. 振子质量非均布的有限结构梁减振频带优化. 《振动工程学报》.DOI
91. 程鹏，左曙光（2019）. 铝合金车轮与钢制车轮螺栓接头对比试验研究. 《北京汽车》.DOI
92. 刘洋，左曙光，邓文哲（2019）. 含辅助槽轴向永磁电机的电磁力波分析及抑制. 《西安交通大学学报》.
93. 左曙光，刘明田，胡胜龙（2019）. 考虑铁芯磁饱和的开关磁阻电机电感及转矩解析建模. 《西安交通大学学报》.
94. 左曙光，刘益民，陆伟（2019）. 基于Ansys-Workbench的高温离心风机叶轮有限元分析. 《风机技术》.
95. 胡胜龙，左曙光，娄豫皖（2019）. 基于传递路径改进的车用电池包减振降噪. 《振动、测试与诊断》.DOI
96. Shuguang Zuo, Dawei Zhou, Kun Hu (2019). Nonlinear modeling and verification of an electromagnetic actuator with consideration of friction. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering.DOI
97. Shuguang Zuo, Xiaorui Hu, Yaodan Zhang, Shuanglong Wu (2019). Rotor Shape Optimization of Claw-Pole Alternator to Reduce Acoustic Noise Caused by Electromagnetic Forces. IEEE Transactions on Energy Conversion.DOI
98. Shuguang Zuo, Hao Wu, Yang Liu, Wenzhe Deng (2019). Analysis and Reduction of Electromagnetic Noise Induced by Dead Time Effect for an Axial-Flux Permanent Magnet Motor. International Conference on Electrical Machines and Systems (ICEMS).DOI
99. Qiang Kang, Perry P. Gu, Chao Gong, Shuguang Zuo (2019). Test and Analysis of Electromagnetic Noise of an Electric Motor in a Pure Electric Car. SAE technical papers on CD-ROM/SAE technical paper series.DOI
100. Dawei Zhou, Shuguang Zuo, Xudong Wu (2019). A Lumped Parameter Model Concerning the Amplitude-Dependent Characteristics for the Hydraulic Engine Mount with a Suspended Decoupler. SAE technical papers on CD-ROM/SAE technical paper series.DOI
101. Zhaoyang Feng, Shuguang Zuo, Yu Ru Mao (2019). Influence Mechanism of Electromechanical Parameters on Transient Vibration of Electric Wheel System. SAE International Journal of Advances and Current Practices in Mobility.DOI
102. Xudong Wu, Lingzhou Sun, Shuguang Zuo, Panxue Liu, Minghai Zhang (2019). Transfer Path Analysis and Low-Frequency Vibration Reduction by Locally Resonant Phononic Crystal. SAE technical papers on CD-ROM/SAE technical paper series.DOI
103. Xudong Wu, Lingzhou Sun, Shuguang Zuo, Panxue Liu, Haidong Huang (2019). Vibration reduction of car body based on 2D dual-base locally resonant phononic crystal. Applied Acoustics.DOI
104. Wenzhe Deng, Shuguang Zuo (2019). Noise reduction of axial‐flux motors by combining various pole‐arc coefficients and circumferential shifting of permanent magnets: analytical approach. IET Electric Power Applications.DOI
105. Shenglong Hu, Shuguang Zuo, Mingtian Liu, Hao Wu (2019). Method for acquisition of equivalent material parameters considering orthotropy of stator core and windings in SRM. IET Electric Power Applications.DOI
106. 左曙光，张耀丹，钟鸿敏，吴双龙（2018）. 爪极发电机转子结构对电磁力谐波和振动噪声的影响分析. 《西安交通大学学报》.
107. 左曙光，李多强，毛钰，吴旭东（2018）. 轮毂电机驱动电动车的纵向动力学分析及参数优化. 《华南理工大学学报(自然科学版)》.
108. 毛钰，左曙光，林福，曹佳楠，郑玉平（2018）. 基于弹性连接结构的电动轮纵向振动特性. 《吉林大学学报(工学版)》.
109. 孙明，左曙光，张翠翠（2018）. 某MPV车型怠速车内噪声优化. 《汽车与新动力》.
110. 吴双龙，左曙光，邓文哲，钟鸿敏，孙罕（2018）. 基于试验的车用爪极发电机噪声源识别与分析. 《振动、测试与诊断》.
111. Shenglong Hu, Shuguang Zuo, Hao Wu, Mingtian Liu (2018). An Analytical Method for Calculating the Natural Frequencies of a Motor Considering Orthotropic Material Parameters. IEEE Transactions on Industrial Electronics.DOI
112. Wenzhe Deng, Shuguang Zuo (2018). Electromagnetic Vibration and Noise of the Permanent-Magnet Synchronous Motors for Electric Vehicles: An Overview. IEEE Transactions on Transportation Electrification.DOI
113. Shuguang Zuo, Duoqiang Li, Yu Mao, Wenzhe Deng (2018). Longitudinal vibration analysis and suppression of electric wheel system driven by in-wheel motor considering unbalanced magnetic pull. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering.DOI
114. Shuanglong Wu, Shuguang Zuo (2018). Characteristics analysis of electromagnetic force and noise of claw pole alternators with different pole and slot combinations and phase number. IET Electric Power Applications.DOI
115. Xudong Wu, Minghai Zhang, Shuguang Zuo, Haidong Huang, Hao Wu (2018). An investigation on interior noise reduction using 2D locally resonant phononic crystal with point defect on car ceiling. Journal of Vibration and Control.DOI
116. Wenzhe Deng, Shuguang Zuo (2018). Comparative Study of Sideband Electromagnetic Force in Internal and External Rotor PMSMs With SVPWM Technique. IEEE Transactions on Industrial Electronics.DOI
117. Fu Lin, Shuguang Zuo, Wenzhe Deng, Shuanglong Wu (2018). Reduction of vibration and acoustic noise in permanent magnet synchronous motor by optimizing magnetic forces. Journal of Sound and Vibration.DOI
118. Shuguang Zuo, Ni Tianxin, Xudong Wu, Yong Li, Xianwu Yang (2018). Mechanism and Conditions of the Polygonal Wear of Vehicle Tire. Automotive Innovation.DOI
119. Fu Lin, Shuguang Zuo, Wenzhe Deng (2018). Impact of rotor eccentricity on electromagnetic vibration and noise of permanent magnet synchronous motor. Journal of Vibroengineering.DOI
120. Shuguang Zuo, Chaofeng Xie, Xudong Wu, Yuejiao Li, Kaijun Wei (2018). Numerical simulation and optimization of aerodynamic noise for claw pole alternator. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
121. Yu Mao, Shuguang Zuo, Jianan Cao (2018). Effects of Rotor Position Error on Longitudinal Vibration of Electric Wheel System in In-Wheel PMSM Driven Vehicle. IEEE/ASME Transactions on Mechatronics.DOI
122. Shuguang Zuo, Haidong Huang, Xudong Wu, Minghai Zhang, Ni Tianxin (2018). Low-frequency band gap of locally resonant phononic crystals with a dual-base plate. The Journal of the Acoustical Society of America.DOI
123. Shuanglong Wu, Shuguang Zuo, Yaodan Zhang (2018). Optimization for Electromagnetic Noise Reduction in Claw Pole Alternator by Rotor Claw Chamfering. IEEE Transactions on Industrial Electronics.DOI
124. Shenglong Hu, Shuguang Zuo (2018). Analytical Modeling of Magnetic Field Considering the Saturation in Switched Reluctance Motor. The Applied Computational Electromagnetics Society Journal (ACES).
125. 夏允权，左曙光（2017）. 基于OptiStruct的汽车方向盘模态优化. 《上海汽车》.
126. 左曙光，黄海东，吴旭东，倪天心，韦锡晋（2017）. 基于声子晶体及其缺陷态特性的车内降噪方法. 《汽车工程》.
127. 阎礁，安一领，周大为，左曙光（2017）. 三缸发动机主动悬置滑模变结构控制研究. 《上海汽车》.
128. 左曙光，张耀丹，刘晓璇，吴双龙，钟鸿敏（2017）. 转子偏心对永磁同步电机振动噪声的影响分析. 《机电一体化》.
129. 毛钰，左曙光，林福（2017）. 转矩波动下电动轮系统机电耦合振动特性. 《吉林大学学报(工学版)》.
130. 左曙光，张耀丹，阎礁，张国辉，林福，吴双龙（2017）. 考虑定子各向异性的永磁同步电机振动噪声优化. 《西安交通大学学报》.
131. 左曙光，马文韬，刘新宇，吴旭东（2017）. 并行式风冷圆柱形锂离子电池组散热分析. 《佳木斯大学学报(自然科学版)》.
132. 韦开君，左曙光，吴旭东，聂玉洁（2017）. 可调低稠度扩压器对提升离心压缩机气动性能的数值研究. 《工程热物理学报》.
133. 夏允权，左曙光（2017）. 基于OptiStruct的汽车方向盘模态优化. 《2017Altair技术大会》.DOI
134. 左曙光，李悦姣，吴旭东，韦开君，孙罕（2017）. 爪极电机气动噪声数值模拟及机理分析. 《浙江大学学报(工学版)》.
135. 吴旭东，左曙光，倪天心，范珈璐（2017）. 并联双振子声子晶体梁结构带隙特性研究. 《振动工程学报》.
136. Fu Lin, Shuguang Zuo, Wenzhe Deng, Shuanglong Wu (2017). Modeling and Analysis of Acoustic Noise in External Rotor In-Wheel Motor Considering Doppler Effect. IEEE Transactions on Industrial Electronics.DOI
137. Wenzhe Deng, Shuguang Zuo (2017). Axial Force and Vibroacoustic Analysis of External-Rotor Axial-Flux Motors. IEEE Transactions on Industrial Electronics.DOI
138. Wenzhe Deng, Shuguang Zuo (2017). Analytical Modeling of the Electromagnetic Vibration and Noise for an External-Rotor Axial-Flux in-Wheel Motor. IEEE Transactions on Industrial Electronics.DOI
139. Yu Mao, Shuguang Zuo, Xudong Wu, Xianglei Duan (2017). High frequency vibration characteristics of electric wheel system under in-wheel motor torque ripple. Journal of Sound and Vibration.DOI
140. Yu Mao, Shuguang Zuo, Xudong Wu (2017). Longitudinal Vibration Analysis of Electric Wheel System in Starting Condition. SAE International journal of vehicle dynamics, stability, and NVH.DOI
141. Longyang Xiang, Shuguang Zuo, Xudong Wu, Jingfang Liu (2017). Study of multi-chamber micro-perforated muffler with adjustable transmission loss. Applied Acoustics.DOI
142. Wenzhe Deng, Shuguang Zuo, Fu Lin, Shuanglong Wu (2017). Influence of pole and slot combinations on vibration and noise in external rotor axial flux in‐wheel motors. IET Electric Power Applications.DOI
143. Fu Lin, Shuguang Zuo, Wenzhe Deng, Shuanglong Wu (2017). Noise Prediction and Sound Quality Analysis of Variable-Speed Permanent Magnet Synchronous Motor. IEEE Transactions on Energy Conversion.DOI
144. 左曙光，聂玉洁，韦开君，何慧娟，吴旭东（2016）. 不同进口形式下离心压缩机的内部流动特性. 《机电一体化》.
145. 左曙光，李悦姣，吴旭东，韦开君（2016）. 爪极电机气动噪声数值模拟及优化. 《机电一体化》.
146. 左曙光，钟鸿敏，吴双龙（2016）. 电励磁爪极发电机漏磁计算分析. 《机电一体化》.
147. 毛钰，左曙光，林福，冯朝阳（2016）. 转矩波动下电动轮纵向阶次振动特性及理论分析. 《同济大学学报(自然科学版)》.
148. 林福，左曙光，吴旭东，吴双龙，毛钰（2016）. 基于阶次分析的永磁同步电机噪声源识别. 《农业工程学报》.
149. 左曙光，毛钰，吴旭东，蒋维旭，韦锡晋（2016）. 磁流变减振器高频硬化特性建模及优化. 《振动与冲击》.
150. 左曙光，韦锡晋，倪天心，吴旭东（2016）. 材料粘弹性对于一维局域共振声子晶体带隙的影响. 《功能材料》.
151. 左曙光，吴双龙，吴旭东，林福，邓文哲（2016）. 电励磁爪极发电机气隙磁场解析模型. 《浙江大学学报(工学版)》.
152. Fu Lin, Shuguang Zuo (2016). Influence of rotor eccentricity on electromagnetic vibration and noise in permanent magnet synchronous motor with different slot-pole combinations. The Journal of the Acoustical Society of America.DOI
153. Shuanglong Wu, Shuguang Zuo, Xudong Wu, Fu Lin, Hongmin Zhong, Yaodan Zhang (2016). Vibroacoustic Prediction and Mechanism Analysis of Claw Pole Alternators. IEEE Transactions on Industrial Electronics.DOI
154. Wenzhe Deng, Shuguang Zuo, Fu Lin, Shuanglong Wu (2016). Investigation of vibration and noise characteristics in axial flux permanent magnet synchronous motor with different magnet shapes. The Journal of the Acoustical Society of America.DOI
155. Fu Lin, Shuguang Zuo, Wenzhe Deng, Shuanglong Wu (2016). Modeling and Analysis of Electromagnetic Force, Vibration, and Noise in Permanent-Magnet Synchronous Motor Considering Current Harmonics. IEEE Transactions on Industrial Electronics.DOI
156. Fu Lin, Shuguang Zuo, Xudong Wu (2016). Electromagnetic vibration and noise analysis of permanent magnet synchronous motor with different slot‐pole combinations. IET Electric Power Applications.DOI
157. Shuanglong Wu, Shuguang Zuo, Xudong Wu (2016). Numerical prediction and analysis of electromagnetic vibration and noise of claw pole alternator. The Journal of the Acoustical Society of America.DOI
158. Longyang Xiang, Shuguang Zuo, Xudong Wu, Jun Zhang, Jingfang Liu (2016). Acoustic behaviour analysis and optimal design of a multi-chamber reactive muffler. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering.DOI
159. Shuguang Zuo, Kaijun Wei, Xudong Wu (2016). Multi-objective Optimization of a Multi-chamber Perforated Muffler Using an Approximate Model and Genetic Algorithm. The International Journal of Acoustics and Vibration.DOI
160. Shuanglong Wu, Shuguang Zuo, Xudong Wu, Fu Lin, Jian Xin Shen (2016). Magnet Modification to Reduce Pulsating Torque for Axial Flux Permanent Magnet Synchronous Machines. The Applied Computational Electromagnetics Society Journal (ACES).
161. Wenzhe Deng, Shuguang Zuo, Lin Fu, Shuanglong Wu (2016). Investigation of vibration and noise characteristics in axial flux permanent magnet synchronous motor with different magnet shapes. Proceedings of meetings on acoustics.DOI
162. Lin Fu, Shuguang Zuo (2016). Influence of rotor eccentricity on electromagnetic vibration and noise in permanent-magnet synchronous motor with different slot-pole combinations. Proceedings of meetings on acoustics.DOI
163. Shuanglong Wu, Shuguang Zuo, Xudong Wu, Wenzhe Deng, Hongmin Zhong, Yaodan Zhang (2016). Numerical prediction and analysis of electromagnetic vibration and noise of claw pole alternator. Proceedings of meetings on acoustics.DOI
164. 左曙光，刘晓璇，吴旭东，沈建（2015）. 基于永磁体轮廓设计的盘式永磁电机转矩优化. 《机电一体化》.
165. 左曙光，蒋维旭，吴旭东，李程祎（2015）. 基于ISIGHT的电动汽车扭杆梁悬架振动传递特性优化. 《吉林大学学报(工学版)》.
166. 左曙光，张珺，吴旭东，龙国，相龙洋，刘敬芳（2015）. 均匀切向流下汽车微穿孔管消声器声学性能分析. 《农业工程学报》.
167. 左曙光，林福，吴旭东（2015）. 车用永磁同步电机转矩解析模型和波动特性分析. 《浙江大学学报(工学版)》.
168. 左曙光，张国辉，吴旭东，高丽华，沈健（2015）. 倾斜偏心下轮毂永磁同步电机电磁力分析. 《浙江大学学报(工学版)》.
169. 马琮淦，左曙光，孟姝，孙庆（2015）. 考虑开槽和高次谐波的永磁同步电机解析模型. 《振动、测试与诊断》.
170. 左曙光，高丽华，孟姝，马琮淦，谭钦文（2015）. 考虑转子磁场谐波的永磁同步电机双闭环非线性建模分析. 《中南大学学报(自然科学版)》.
171. 张孟浩，左曙光，相龙洋，胡佳杰（2015）. 双层微穿孔管消声器传声损失理论计算与分析. 《中南大学学报(自然科学版)》.
172. 左曙光，王哲，吴旭东，胡清，韦开君，何慧娟（2015）. 考虑轴承波纹度的燃料电池车用旋涡风机振动特性分析. 《振动与冲击》.
173. 左曙光，何慧娟，吴旭东，张琛璘，韦开君，王哲（2015）. 叶片旋转噪声激励下旋涡风机壳体声辐射计算理论及分析. 《振动与冲击》.
174. Qingsong Wang, Shuangxia Niu, S. L. Ho, W. N. Fu, Shuguang Zuo (2015). Design and analysis of novel magnetic flux‐modulated mnemonic machines. IET Electric Power Applications.DOI
175. Xudong Wu, Shuguang Zuo, Ni Tianxin (2015). Bifurcation and factors influence analysis on self-excited vibration of tire tread. Journal of Vibration and Control.DOI
176. Shuguang Zuo, Jun Zhang, Xudong Wu, Jiajie Hu, Long Guo (2015). Study on Active Noise Control of Blower in Fuel Cell Vehicle under Transient Conditions. SAE International Journal of Passenger Cars - Mechanical Systems.DOI
177. Shuguang Zuo, Long Guo, Xudong Wu, Jiajie Hu, Longyang Xiang, Jun Zhang (2015). A New Narrowband Active Noise Control System in the Presence of Frequency Mismatch and its Application for Steady-State Blower Noise. SAE technical papers on CD-ROM/SAE technical paper series.DOI
178. Shuguang Zuo, Fu Lin, Xudong Wu (2015). Noise Analysis, Calculation, and Reduction of External Rotor Permanent-Magnet Synchronous Motor. IEEE Transactions on Industrial Electronics.DOI
179. 相龙洋，左曙光，何吕昌，胡佳杰，张孟浩（2014）. 电动汽车及其驱动永磁电机声振特性试验. 《振动、测试与诊断》.
180. 相龙洋，左曙光，吴旭东，龙国，张珺（2014）. 电动汽车驱动电机定子振动特性优化. 《制造业自动化》.
181. 相龙洋，左曙光，吴旭东，龙国，张珺（2014）. 穿孔段长度对微穿孔管消声器传递损失的影响分析. 《制造业自动化》.
182. 左曙光，朱俊兴，吴旭东，胡竞，郭学良（2014）. 一种考虑粘弹塑性的新型橡胶衬套高频建模方法研究. 《制造业自动化》.
183. 左曙光，王青松，吴旭东，孙庆，谭钦文（2014）. 轮毂电机电磁噪声测试方法及特性分析. 《制造业自动化》.
184. 左曙光，张珺，吴旭东，张孟浩，相龙洋（2014）. 燃料电池车风机用微穿孔管消声器优化设计. 《制造业自动化》.
185. 康强，左曙光，韩惠君，韦开君（2014）. 燃料电池车用旋涡风机气动噪声试验及仿真研究. 《汽车工程》.
186. 左曙光，何慧娟，吴旭东，韦开君（2014）. 进口弯管对离心压缩机气动噪声影响的数值研究. 《机电一体化》.
187. 左曙光，龙国，吴旭东，张孟浩，相龙洋，张珺（2014）. 隔板对汽车微穿孔管消声器声学特性的影响. 《农业工程学报》.
188. 左曙光，张琛璘，韦开君，韩惠君（2014）. 叶轮参数对旋涡风机性能影响分析及优化. 《中南大学学报(自然科学版)》.
189. 左曙光，朱俊兴，吴旭东，胡竞，段向雷（2014）. 一种考虑粘弹塑性的新型橡胶材料本构模型及其参数识别. 《重庆大学学报》.
190. 左曙光，段向雷，吴旭东（2014）. 电动轮刚性环耦合特性模型建模与分析. 《同济大学学报(自然科学版)》.
191. 左曙光，李凯，吴旭东，郭学良，李程祎（2014）. 一种新型橡胶衬套理论模型及其参数识别. 《振动、测试与诊断》.
192. 左曙光，高丽华，吴旭东，马琮淦，沈健（2014）. 电动车用永磁同步电机转子偏心对电磁力影响分析. 《佳木斯大学学报(自然科学版)》.
193. 左曙光，段向雷，吴旭东（2014）. 电动轮-悬架系统台架振动特性试验分析. 《振动与冲击》.
194. Shuguang Zuo, Zhaoyang Feng, Jian Yun Pan, Xudong Wu (2014). Electromechanical coupling dynamic modeling and analysis of vertical electrodynamic shaker considering low frequency lateral vibration. Advances in Mechanical Engineering.DOI
195. Kaijun Wei, Shuguang Zuo, Huijuan He, Zhe Wang (2014). Study on the aerodynamic noise of centrifugal compressors with rotor static eccentricity. The Journal of the Acoustical Society of America.DOI
196. Shuguang Zuo, Tianle Ni, Xudong Wu, Ke Jia Wu, X. W. Yang (2014). Prediction procedure for wear distribution of transient rolling tire. International Journal of Automotive Technology.DOI
197. Conggan Ma, Shuguang Zuo (2014). Black-Box Method of Identification and Diagnosis of Abnormal Noise Sources of Permanent Magnet Synchronous Machines for Electric Vehicles. IEEE Transactions on Industrial Electronics.DOI
198. Shuguang Zuo, Xianglei Duan, Yong Li (2014). Study on Dynamics of Polygonal Wear of Automotive Tire Caused by Self‐Excited Vibration. Mathematical Problems in Engineering.DOI
199. La Xiang, Shuguang Zuo, Lv Chang He, M. H. Zhang, Jian Jun Hu, Long Guo (2014). Optimization of Interior Permanent Magnet Motor on Electric Vehicles to Reduce Vibration Caused by the Radial Force. The Applied Computational Electromagnetics Society Journal (ACES).
200. Kaijun Wei, Shuguang Zuo, Huijuan He, Zhe Wang (2014). Numerical study on the unsteady behavior of a centrifugal compressor for the fuel-cell vehicle. Proceedings of meetings on acoustics.DOI
201. Longyang Xiang, Shuguang Zuo, Menghao Zhang, Jiajie Hu, Long Guo (2014). Study of micro-perforated tube mufflers with adjustable transmission loss. Proceedings of meetings on acoustics.DOI
202. 相龙洋，左曙光，孙庆，孟姝（2013）. 汽车手动变速器振动噪声特性试验研究. 《制造业自动化》.
203. 李程祎，左曙光，段向雷（2013）. 考虑转矩波动的电动汽车悬架NVH性能参数优化. 《汽车工程》.
204. 黄鹏，左曙光，段向雷，胡竞，李程祎（2013）. 转矩波动作用下弹簧减振器系统性能参数的多岛遗传算法优化. 《制造业自动化》.
205. 胡竞，左曙光，段向雷，李程伟，题昕（2013）. 公理化设计在悬架K特性优化中的应用. 《制造业自动化》.
206. Longyang Xiang, Shuguang Zuo, Zhang MengHao, Jiajie Hu, Long Guo (2013). Study of micro-perforated tube mufflers with adjustable transmission loss. The Journal of the Acoustical Society of America.DOI
207. Qiang Kang, Shuguang Zuo, Kaijun Wei (2013). Study on the aerodynamic noise of internal flow of regenerative flow compressors for a fuel-cell car. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
208. Chengyi Li, Shuguang Zuo (2013). Vibration Characteristic Analysis and Optimization of the Rear Suspension of Eccentrical Motor Driven Electric Vehicle. SAE technical papers on CD-ROM/SAE technical paper series.DOI
209. 李程，左曙光，段向雷，胡竞，题昕（2012）. 考虑纵向加速度的三自由度车辆单轨非线性模型的建立与分析. 《制造业自动化》.
210. Shuguang Zuo (2012). Effect of Blade Parameters on Performance of Regenerative Blower. Fluid Machinery.
211. Shuguang Zuo (2012). Vibration Analysis of the Driving Force Loading Device on Tire Rolling Jack Horse. Journal of Jiamusi University.
212. Shuguang Zuo (2012). Lateral self-excited vibration analysis for a type considering driving force. Zhendong yu chongji.
213. 倪天心，左曙光，吴侃，吴旭东，杨宪武（2011）. 轮胎稳态滚动的仿真及其接地面积的可视化测量(英文). 《汽车工程学报》.
214. 宋立廷，左曙光，康强（2011）. 燃料电池车用旋涡风机叶轮模态分析. 《制造业自动化》.
215. Huan Wei, Shuguang Zuo, Yuyang He, Conggan Ma (2011). The application and research of sheet-shaped phononic crystals on body ceiling's vibration attenuation. International Conference on Electrical and Control Engineering.DOI
216. Yong Li, Shuguang Zuo, Lei Lei, Xianwu Yang, Xudong Wu (2011). Analysis of impact factors of tire wear. Journal of Vibration and Control.DOI
217. Xudong Wu, Shuguang Zuo, Li Lei, Xiaojun Yang, Yuying Li (2011). Parameter identification for a LuGre model based on steady-state tire conditions. International Journal of Automotive Technology.DOI
218. Yong Li, Shuguang Zuo, Lei Lei, Xianwu Yang, Xudong Wu (2011). Characteristics' analysis of lateral vibration of tire tread. Journal of Vibration and Control.DOI
219. Duan Xiang-lei, Shuguang Zuo, HE Lv-chang, Rong He (2011). The Neural Network Direct Inverse Control of Four-wheel Steering System. International Conference on Measuring Technology and Mechatronics Automation (ICMTMA).DOI
220. 雷镭，左曙光，杨宪武，王纪瑞，秦立州（2010）. 汽车后桥悬架中凸形螺旋弹簧有限元分析. 《制造业自动化》.
221. 王纪瑞，左曙光，吴旭东，杨宪武，李勇，雷镭，吴侃（2010）. 基于二次开发的轮胎胎面自激振动仿真及影响因素分析. 《2010中国汽车工程学会年会论文集》.
222. 雷镭，左曙光，杨宪武，吴旭东，李勇（2010）. 基于逆向工程技术的轮胎3D模型设计研究. 《汽车技术》.
223. Ruifeng Chen, Shuguang Zuo, Rong Xing He, HE Lv-chang (2010). Stator FEM modeling of permanent magnet synchronous motor for electric vehicle driving based on structural vibration analysis.DOI
224. Rong Xing He, Shuguang Zuo, Huo Qin, Bo Yang (2010). Sensitivity analyses of motor car suspension parameters' impacts on vehicle performance based on ADAMS.DOI
225. Bo Yang, Shuguang Zuo (2010). Sensitivity analysis and improvement of front suspension structure parameters for electric car.DOI
226. Xu Dong Wu, Shuguang Zuo, Lei Lei, Zian Wu Yang, Yong Li (2010). Simulation of Suspension-Tire System Model Based on Rear Axle of Twist Beam. Applied Mechanics and Materials.DOI
227. Yuying Li, Shuguang Zuo, Li Lei, Xiaojun Yang, Xudong Wu (2010). The Complex Dynamical Behaviors of Lateral Vibration of Tire. Applied Mechanics and Materials.DOI
228. Lei Lei, Shuguang Zuo, Xianwu Yang, Xudong Wu, Yong Li (2010). Finite element analysis of radial tires based on the software of MARC. International Conference on Advanced Computer Theory and Engineering.DOI
229. Xianwu Yang, Shuguang Zuo, Hua Huang (2010). Modeling and simulation analysis of rear axle with multi-degree-of-freedom. International Conference on Advanced Computer Theory and Engineering.DOI
230. Yong Li, Shuguang Zuo, Lei Lei, Xianwu Yang, Xudong Wu (2010). Analysis of Influence of Tire Pressure on Polygonal Wear of Tire. WASE International Conference on Information Engineering.DOI
231. Shuguang Zuo (2010). Optimization of Active Dynamic Vibration Absorber Based on Genetic Algorithm and LQR. Journal of Jiamusi University.
232. Shuguang Zuo (2010). Research on Optimal Control and Semi-active Control of Vehicle Suspension. Journal of Jiamusi University.
233. Shuguang Zuo (2010). Control Effect Analysis of Control Factors for Rear Wheel Steer Angle of Four-wheel-steering-vehicle. Journal of Jiamusi University.
234. Shuguang Zuo (2010). The Analysis of Four-Wheel-Steering-Vehicle Based on Linear-Quadratic (LQ) Optimal Control Theory. Journal of Jiamusi University.
235. Shuguang Zuo (2010). Direct Inverse Control of Four-wheel Steering System by means of Neural Network. Journal of Jiamusi University.
236. Lei Lei, Zuo Shuguang, Xianwu Yang, Jirui Wang (2010). A finite element analysis of the barrel-shaped helical spring on the vehicle rear suspension.DOI
237. 康强，左曙光，周炜（2009）. 汽车用户道路行驶载荷谱测量及推断方法研究. 《汽车技术》.
238. Xianwu Yang, Shuguang Zuo, Lei Lei, Wu Xudong, Hua Huang (2009). Hopf bifurcation and stability analysis of a non-linear model for self-excited vibration of tire. IEEE Intelligent Vehicles Symposium.DOI
239. Xudong Wu, Shuguang Zuo, Lei Lei, Xianwu Yang, Hua Huang (2009). A three degree-of-freedom dynamic modeling of twist beam suspension-tire system. IEEE Intelligent Vehicles Symposium.DOI
240. Shuguang Zuo, Shiwei Zhang, Xiumin Shen, Lin Li (2009). A study on structural optimization of hydrogen-supply system cabinet in Fuel Cell Vehicle. IEEE Intelligent Vehicles Symposium.DOI
241. Xiumin Shen, Shuguang Zuo, Shiwei Zhang, Lin Li, HE Lv-chang (2009). NVH research Based on Fuel Cell Vehicle. IEEE Intelligent Vehicles Symposium.DOI
242. 王阳阳，靳晓雄，左曙光，章志龙（2008）. 汽车底盘控制仿真平台研究. 《汽车科技》.
243. 王阳阳，靳晓雄，左曙光，马宏霞（2008）. 基于R-W多体理论的整车动力学仿真平台研究. 《汽车工程》.
244. 张世炜，左曙光，蔡建江，申秀敏，李林（2008）. 燃料电池轿车燃料供给系统声振分析研究. 《2008中国汽车工程学会年会论文集》.
245. 申秀敏，左曙光，李林，张世炜（2008）. 燃料电池车车内空气声传递路径分析. 《2008中国汽车工程学会年会论文集》.
246. Xiumin Shen, Shuguang Zuo, Shiwei Zhang, Lin Li (2008). Transfer path analysis of fuel cell vehicle interior air-borne noise. IEEE Vehicle Power and Propulsion Conference (VPPC).DOI
247. 郭荣，万钢，左曙光，王宏雁（2007）. 燃料电池轿车主要噪声源识别的试验研究. 《汽车工程》.
248. 郭荣，万钢，左曙光（2007）. 燃料电池轿车车内噪声传递路径分析研究. 《2007中国汽车工程学会年会》.
249. 赵立新，左曙光，吕胜利（2007）. 并联混合动力汽车模糊逻辑控制策略的设计. 《汽车技术》.
250. 阎礁，左曙光，陈有松，郭荣（2006）. 燃料电池轿车车内噪声特性试验分析. 《汽车技术》.
251. 陈有松，左曙光，阎礁（2006）. 燃料电池轿车的室内噪声分析与预测. 《汽车工程》.
252. Shuguang Zuo, Jiao Yan (2006). Experimental Analysis for the Interior Noise Characteristics of the Fuel Cell Car. IEEE International Conference on Vehicular Electronics and Safety (ICVES).DOI
253. 马竞展，左曙光，何志生（2005）. 基于Matlab/Simulink环境四轮驱动混合动力汽车建模与仿真. 《上海汽车》.
254. 吕胜利，左曙光（2005）. 并联混合动力汽车控制策略的综合分析. 《上海汽车》.
255. 彭为，靳晓雄，左曙光（2004）. 基于有限元分析的轿车后桥疲劳寿命预测. 《汽车工程》.
256. 虞健，左曙光，靳晓雄（2004）. 压缩空气动力汽车研究. 《汽车科技》.
257. 左曙光，靳晓雄（2003）. 发动机振动传递系统建模及刚度参数影响分析. 《汽车工程》.
258. 左曙光，胡子正，李文辉，魏宏（2001）. 桑塔纳轿车后桥等效刚度分析及测量技术. 《汽车技术》.

书籍章节

1. Xianwu Yang, Shuguang Zuo (2012). Parameters Sensitivity Analysis of Self-Excited Vibration of Tires. Lecture notes in electrical engineering.DOI