易丹青

期刊论文

1. Pan Tan, Jin Gui Qin, Xiang Quan, Danqing Yi, Bin Wang (2023). Co-strengthening of the multi-phase precipitation in high-strength and toughness cast Al–Cu–Zn–Mg alloy via changing Zn/Mg ratios. Materials Science and Engineering A.DOI
2. Pan Tan, Zhengqing Liu, Jin Gui Qin, Qirong Wei, Bin Wang, Danqing Yi (2023). Enhanced corrosion performance by controlling grain boundary precipitates in a novel crossover Al-Cu-Zn-Mg alloy by optimizing Zn content. Materials Characterization.DOI
3. Fanghua Shen, Zhenzhong Sun, Wenfang Li, Zirong Zhou, Jianwen Guo, Yang Hai, Yuliang Zhao, Yuxun Zhang, Jiaen Luo, Yongsen Deng, Xin-Hao Zhao, Boyan Sun, Danqing Yi (2023). New insight of texture and microstructure evolution, and the connections between with tensile performance in as-annealed Al-Cu-Mg-Zr sheet. Journal of Alloys and Compounds.DOI
4. 张世进，李凯，易丹青，刘会群（2022）. 冷轧TA5钛合金退火过程的再结晶行为及织构演变. 《金属热处理》.
5. 秦晋，李志，马明阳，易丹青，王斌（2022）. 不同晶粒尺寸5083铝合金晶间腐蚀和应力腐蚀开裂的差异性（英文）. Transactions of Nonferrous Metals Society of China.
6. 伍贵成，刘会群，冯春，李睿哲，易丹青（2022）. 固溶时效及预拉伸变形对Ti-5.5Al-2Zr-1Mo-2.5V合金管材组织演化及强韧性的影响. 《中国有色金属学报》.
7. 路通，淡振华，李凯，易丹青，周廉，常辉（2022）. Ti-35421合金在β单相区的热变形行为及动态再结晶机制（英文）. Transactions of Nonferrous Metals Society of China.
8. Min Huang, Xinyu Cao, Jingnan Zhang, Huiqun Liu, Jiaxin Lu, Danqing Yi, Yongmei Ma (2022). Mesosphere of Carbon-Shelled Copper Nanoparticles with High Conductivity and Thermal Stability via Direct Carbonization of Polymer Soft Templates. Materials.DOI
9. Jin Gui Qin, Zhengqing Liu, Pan Tan, Danqing Yi, Bin Wang (2022). Study on the formation and regulation mechanism of W phase and the improvement of mechanical properties in homogenization of cast Al–Cu-Sc-Zr alloys: Experiments and calculations. Vacuum.DOI
10. Jin Gui Qin, Pan Tan, Xiang Quan, Zhengqing Liu, Danqing Yi, Bin Wang (2022). The effect of sc addition on microstructure and mechanical properties of as-cast Zr-containing Al-Cu alloys. Journal of Alloys and Compounds.DOI
11. Tong Lu, Zhenhua Dan, Kai Li, Danqing Yi, Lian Zhou, Hui Chang (2022). Hot deformation behaviors and dynamic recrystallization mechanism of Ti-35421 alloy in β single field. Transactions of Nonferrous Metals Society of China.DOI
12. Kai Li, Huiqun Liu, Ningjie Gu, Xiang Heng Xiao, Shan Dai, Jiatao Liu, Danqing Yi (2022). Improving strength and ductility of Ti-4Al-0.005B titanium alloy through tailoring equiaxed and lamellar microstructure during thermal mechanical process. Journal of Materials Research and Technology.DOI
13. Tong Lu, Zhenhua Dan, Tian-jing Li, Guoqing Dai, Yangyang Sun, Yanhua Guo, Kai Li, Danqing Yi, Hui Chang, Lian Zhou (2022). Flow softening and microstructural evolution of near β titanium alloy Ti-35421 during hot compression deformation in the α+β region. Journal of Materials Research and Technology.DOI
14. Bo Jiang, Chao Wang, Renguo Song, Shichen Li, Fuhua Cao, Danqing Yi (2022). Effect of creep ageing on the corrosion behaviour of an Al–Cu–Li alloy. Corrosion Science.DOI
15. Qiaoli Li, Jin Gui Qin, Daiping Jiang, Danqing Yi, Bin Wang (2022). Precipitate coarsening and mechanical properties in 6082 aluminium alloy during long-term thermal exposure. Journal of Alloys and Compounds.DOI
16. Jin Gui Qin, Zhi Li, Mingyang Ma, Danqing Yi, Bin Wang (2022). Diversity of intergranular corrosion and stress corrosion cracking for 5083 Al alloy with different grain sizes. Transactions of Nonferrous Metals Society of China.DOI
17. Jin Gui Qin, Mingyang Ma, Pan Tan, Danqing Yi, Bin Wang (2021). Effects of Sc alloying on the evolution of solidification microstructure and formation of W phase in as-cast 2519 aluminum alloys. Journal of Alloys and Compounds.DOI
18. Suping Pan, Mingzhu Fu, Huiqun Liu, Yuqiang Chen, Danqing Yi (2021). In Situ Observation of the Tensile Deformation and Fracture Behavior of Ti–5Al–5Mo–5V–1Cr–1Fe Alloy with Different Microstructures. Materials.DOI
19. Fanghua Shen, Wenfang Li, Zhenzhong Sun, Zirong Zhou, Chunxiao Xie, Zilong Liao, Danqing Yi (2021). Insights of texture and microstructure evolution in the short time annealing of Al-Cu-Mg alloy at large temperature range. Journal of Alloys and Compounds.DOI
20. Wei Wang, Danqing Yi, Hua Wei, Bin Wang (2021). High damping capacity of Al-40Zn alloys with fine grain and eutectoid structures via Yb alloying. Journal of Alloys and Compounds.DOI
21. Suping Pan, Huiqun Liu, Yuqiang Chen, Guangfang Chi, Danqing Yi (2021). Lamellar α fencing effect for improving stress relaxation resistance in Ti-55511 alloy. Materials Science and Engineering A.DOI
22. Mingyang Ma, Ruilin Lai, Jin Gui Qin, Bin Wang, Huiqun Liu, Danqing Yi, Tongguang Zhai (2021). Achieving exceptionally tensile properties and damage tolerance of 5083 aluminum alloy by friction stir processing assisted by ultrasonic and liquid nitrogen field. Materials Science and Engineering A.DOI
23. 顾顺，王斌，孙顺平，李小平，江勇，易丹青（2020）. 基于第一性原理的D8m-Mo5Si3成键特征与点缺陷行为. 《中国有色金属学报》.
24. 孙顺平，王斌，顾顺，李小平，雷卫宁，江勇，易丹青（2020）. Al、Cr和Nb在Mo（111）/MoSi2（110）界面的元素效应. 《中国有色金属学报》.
25. 易丹青（2020）. 金属材料热处理.
26. 王乐，易丹青，刘会群，蒋龙，冯春（2020）. Ru对Ti-6Al-4V合金腐蚀行为的影响及机理研究. 《中国腐蚀与防护学报》.
27. 郭宇明，易丹青，张嘉艺，王斌（2020）. 定向分布石墨烯纳米片/Al8030复合材料的低温蠕变性能研究. 《粉末冶金技术》.DOI
28. 王南海，易丹青，王海生，成勇（2020）. Al-4.5Cu-3.5Zn-0.5Mg铸造铝合金的均匀化工艺及组织演变. 《金属热处理》.DOI
29. Haisheng Wang, Danqing Yi, Huiqun Liu, Bin Wang (2020). Microstructure and mechanical properties of interrupted aged cast Al–4.5Cu–3.5Zn–0.5 Mg alloy. Materials Letters.DOI
30. Mingyang Ma, Ruilin Lai, Jin Gui Qin, Bin Wang, Huiqun Liu, Danqing Yi (2020). Effect of weld reinforcement on tensile and fatigue properties of 5083 aluminum metal inert gas (MIG) welded joint: Experiments and numerical simulations. International Journal of Fatigue.DOI
31. Fanghua Shen, Wenfang Li, Chunxiao Xie, Zirong Zhou, Yuqiang Chen, Danqing Yi, Yuqiang Chen, Bo Jiang, Zhenzhong Sun (2020). Continuous texture evolution during staged solid solution of Al‐Cu‐Mg and the influence on fatigue resistance. Fatigue & Fracture of Engineering Materials & Structures.DOI
32. Hua Wei, Danqing Yi, Wei Wang, Binyang Lin, Bin Wang (2020). Experimental investigation of hardness and impact toughness of in suit Ag-rich binder phase formation with h-BN/CuSn10 metal matrix composite. Journal of Alloys and Compounds.DOI
33. Hongxuan Wang, Jiayi Zhang, Bin Wang, Mingyang Ma, Danqing Yi (2020). Influence of surface enhanced treatment on microstructure and fatigue performance of 6005A aluminum alloy welded joint. Journal of Manufacturing Processes.DOI
34. Guangfang Chi, Huiqun Liu, Danqing Yi (2020). Drastic improvement in elongation and impact toughness of Ti–Al–V–Mo–Zr alloy tube via three-step heat treatment. Materials Letters.DOI
35. Zhan Hu, Xiyi Zhou, Huiqun Liu, Danqing Yi (2020). The formation of microtextured region during thermo-mechanical processing in a near-β titanium alloy Ti-5Al-5Mo-5V-1Cr-1Fe. Journal of Alloys and Compounds.DOI
36. Guangfang Chi, Danqing Yi, Bo Jiang, Lingyun Yang, Huiqun Liu (2020). Crack propagation during Charpy impact toughness testing of Ti−Al−V−Mo−Zr alloy tubes containing equiaxed and lamellar microstructures. Journal of Alloys and Compounds.DOI
37. Xiyi Zhou, Zhan Hu, Danqing Yi (2020). Effects of Ag on the oxidation kinetics and properties in copper-alumina composites during in-situ fabrication. Journal of Alloys and Compounds.DOI
38. Bo Jiang, Haisheng Wang, Yu Tian, Danqing Yi, Huiqun Liu, Zhan Hu (2020). Effects of aging time on corrosion behavior of an Al-Cu-Li alloy. Corrosion Science.DOI
39. Xiaolong Liang, Hui Wang, Qianfu Pan, Jiyun Zheng, Huiqun Liu, Ruiqian Zhang, Yang Xu, Yu X. Xu, Danqing Yi (2020). Recrystallization and mechanical properties of cold-rolled FeCrAl alloy during annealing. Journal of Iron and Steel Research International.DOI
40. Junhao Zhu, Bo Jiang, Danqing Yi, Haishen Wang, Guicheng Wu (2020). Precipitate Behavior, Mechanical Properties and Corrosion Behavior of an Al-Zn-Mg-Cu Alloy during Non-Isothermal Creep Aging with Axial Tension Stress. Metals.DOI
41. Gui-Cheng Wu, Chun Feng, Huiqun Liu, Yonggang Liu, Danqing Yi (2020). Fine Secondary α Phase-Induced Strengthening in a Ti-5.5Al-2Zr-1Mo-2.5V Alloy Pipe with a Widmanstätten Microstructure. Journal of Materials Engineering and Performance.DOI
42. Bo Jiang, Haisheng Wang, Danqing Yi, Yu Tian, Fanghua Shen, Bin Wang, Huiqun Liu, Zhan Hu (2020). Effect of Ag addition on the age hardening and precipitation behavior in an Al-Cu-Li-Mg-Zn-Mn-Zr alloy. Materials Characterization.DOI
43. 成勇，易丹青，王南海，王海生（2019）. Er对AC7A铝镁合金铸态组织和力学性能的影响. 《铸造技术》.DOI
44. 孙顺平，顾顺，江勇，易丹青（2019）. 合金元素在Mo中的活度和溶解度. 《中国有色金属学报》.
45. 肖禹，刘会群，易丹青，王俭，陈战乾，高颀（2019）. 应变路线对Ti-6242合金组织与力学性能的影响. 《金属热处理》.
46. 莫敏，邹丹，易丹青（2019）. 淬火与回火工艺对WC-20%Co硬质合金微观结构和性能的影响. 《硬质合金》.
47. 田宇，姜波，易丹青，胡均，秦泽华，肖禹（2019）. 预拉伸对峰时效2297铝锂合金应力腐蚀性能的影响. 《腐蚀科学与防护技术》.
48. 刘洋，王刚，王怡人，江勇，易丹青（2019）. Cr、Ti掺杂Cu/石墨烯界面结合性能的第一性原理预测（英文）. Transactions of Nonferrous Metals Society of China.
49. 丰亮东，易丹青，刘会群，王斌，王海生（2019）. 温度对Al-Zn-Mg-Cu合金应力腐蚀敏感性的影响. 《热加工工艺》.DOI
50. Guangfang Chi, Danqing Yi, Huiqun Liu (2019). Effect of roughness on electrochemical and pitting corrosion of Ti-6Al-4V alloy in 12 wt.% HCl solution at 35 °C. Journal of Materials Research and Technology.DOI
51. Yang Liu, Gang Wang, Yiren Wang, Yong Jiang, Danqing Yi (2019). Enhanced Cu/graphene adhesion by doping with Cr and Ti: A first principles prediction. Transactions of Nonferrous Metals Society of China.DOI
52. Mingyang Ma, Bing Wang, Huiqun Liu, Danqing Yi, Fanghua Shen, Tongguang Zhai (2019). Investigation of fatigue crack propagation behavior of 5083 aluminum alloy under various stress ratios: Role of grain boundary and Schmid factor. Materials Science and Engineering A.DOI
53. Haisheng Wang, Bo Jiang, Danqing Yi, Bin Wang, Huiqun Liu, Chunping Wu, Fanghua Shen (2019). Microstructure, corrosion behavior and mechanical properties of a non-isothermal ageing treated cast Al–4.5Cu–3.5Zn–0.5Mg alloy. Materials Research Express.DOI
54. Yuming Guo, Danqing Yi, HuiQun Liu, Bin Wang, Bo Jiang, Haisheng Wang (2019). Mechanical properties and conductivity of graphene/Al-8030 composites with directional distribution of graphene. Journal of Materials Science.DOI
55. Suping Pan, Huiqun Liu, Yuqiang Chen, Xiaoyong Zhang, Kui-wai CHEN, Danqing Yi (2019). αs dissolving induced mechanical properties decay in Ti-55511 alloy during uniaxial fatigue. International Journal of Fatigue.DOI
56. Zhi Li, Danqing Yi, Chengyu Tan, Bin Wang (2019). Investigation of the stress corrosion cracking behavior in annealed 5083 aluminum alloy sheets with different texture types. Journal of Alloys and Compounds.DOI
57. Le Wang, Chun Feng, Huiqun Liu, Danqing Yi, Long Jiang, Yaorong Feng (2019). Revealing the role of Ru in improving corrosion resistance of titanium alloys in HCl solution. Heat Treatment and Surface Engineering.DOI
58. Fanghua Shen, Zhenzhong Sun, Wenfang Li, Zirong Zhou, Shouyan Zhong, Huiyu Huang, Jianwen Guo, Chunxiao Xie, Yanlin Wang, Danqing Yi (2019). Texture evolution in hot-rolled Al–Cu–Mg sheets using orientation streamline approach and texture index. Journal of Alloys and Compounds.DOI
59. Gui-jie Li, Bo Jiang, Huiqun Liu, Liang Ning, Danqing Yi, Xianming Wang, Zhiyuan Liu (2019). Superhydrophobic surface with lotus/petal effect and its improvement on fatigue resistance of heat-resistant steel. Progress in Organic Coatings.DOI
60. Binyang Lin, Danqing Yi, Huiqun Liu, Jiao Xu, Bin Wang (2019). High-temperature pre-sintering: A new strategy to improve the properties of h-BN/CuSn10 matrix composites. Journal of Alloys and Compounds.DOI
61. Jiayi Zhang, Bin Wang, Danqing Yi (2019). Stress corrosion cracking behavior in 2297 Al–Cu–Li alloy at different grain orientations. Materials Science and Engineering A.DOI
62. Jing Chen, Yilan Jiang, Huiqun Liu, Danqing Yi, Ruiqian Zhang, Xun Dai, Shaoqiang Liu (2019). Texture evolution of cold-rolled Zr-1Sn-0.3Nb-0.3Fe-0.1Cr alloy during annealing. Journal of Nuclear Materials.DOI
63. Mingyang Ma, Jiayi Zhang, Danqing Yi, Bin Wang (2019). Investigation of high-cycle fatigue and fatigue crack propagation characteristic in 5083-O aluminum alloy. International Journal of Fatigue.DOI
64. Hongxuan Wang, Tao Lü, Danqing Yi, Bin Wang (2019). Microstructure refinement, characterization of tensile behavior and aging resistance of Zr-modified SAC105 solder alloy. Journal of Materials Science Materials in Electronics.DOI
65. Qiang Cui, Danqing Yi, Hongxuan Wang, Jiayi Zhang, Jiao Xu, Bin Wang (2019). Effects of grain size and secondary phase on corrosion behavior and electrochemical performance of Mg-3Al-5Pb-1Ga-Y sacrificial anode. Journal of Rare Earths.DOI
66. Zhan Hu, Xiyi Zhou, Xian Nie, Siyu Zhao, Huiqun Liu, Danqing Yi, Xiaoyong Zhang (2019). Finer subgrain microstructure induced by multi-pass compression in α+β phase region in a near-β Ti-5Al-5Mo-5V-1Cr-1Fe alloy. Journal of Alloys and Compounds.DOI
67. Xiyi Zhou, Zhan Hu, Danqing Yi (2019). Enhancing the oxidation resistance and electrical conductivity of alumina reinforced copper-based composites via introducing Ag and annealing treatment. Journal of Alloys and Compounds.DOI
68. Fanghua Shen, Zirong Zhou, Wenfang Li, Zhenzhong Sun, Jun Tian, Chunxiao Xie, Jianwen Guo, Zilong Liao, Danqing Yi, Jiayi Zhang, Haisheng Wang, Bo Jiang (2019). Micro-mechanism of texture evolution during isochronal annealing of as-annealed hot rolled Al-Cu-Mg sheet. Materials & Design.DOI
69. 王海生，张英，易丹青，刘会群，王斌（2018）. 过共晶铝硅合金中初晶硅复合异质形核的研究. 《铸造》.
70. 胡均，刘会群，王斌，易丹青，田宇，王南海（2018）. 原位自生（Y2O3+TiB）/Ti-6Al-4V复合材料的组织与力学性能. 《粉末冶金材料科学与工程》.
71. 姚草根，阳文豪，孟烁，易丹青，吕宏军，王斌（2018）. 碳含量对热等静压FGH4169合金原始颗粒边界与力学性能的影响. 《粉末冶金材料科学与工程》.
72. 朱律齐，万维锋，江勇，刘会群，易丹青（2018）. 钛中α/ω界面的第一性原理计算. 《稀有金属材料与工程》.
73. 蒋亦岚，刘会群，易丹青，林高用，戴训，张瑞谦，孙永铎，刘少强（2018）. 冷轧Zr-1Sn-0.3Nb-0.3Fe-0.1Cr合金在退火过程中的组织演变及再结晶行为（英文）. Transactions of Nonferrous Metals Society of China.
74. Jiayi Zhang, Huatao Zhao, Junhao Zhu, Bin Wang, Danqing Yi (2018). Relationship between electrical resistivity and Al3(Zr,Sc) core–shell dispersoids of Al–Zr–Sc electrical transmission cable: Modeling and experimental results. Electric Power Systems Research.DOI
75. Ying Tao, Danqing Yi, Baojun Zhu (2018). Synthesis of LiNiPO4 via citrate sol–gel route. Journal of Sol-Gel Science and Technology.DOI
76. Dongdong Li, Weifeng Wan, Lvqi Zhu, Yong Jiang, Shouqi Shao, Gaojing Yang, Huiqun Liu, Danqing Yi, Shuo Cao, Qing‐Miao Hu (2018). Experimental and DFT characterization of interphase boundaries in titanium and the implications for ω-assisted α phase precipitation. Acta Materialia.DOI
77. Tao Lü, Danqing Yi, Hongxuan Wang, Xiaoxuan Tu, Bin Wang (2018). Microstructure, mechanical properties, and interfacial reaction with Cu substrate of Zr-modified SAC305 solder alloy. Journal of Alloys and Compounds.DOI
78. Zhan Hu, Danqing Yi, Huiqun Liu, Xiyi Zhou, Hangwei Zhou (2018). New type of macrozone in a near-β titanium alloy Ti-5Al-5Mo-5V-1Cr-1Fe. Materials Letters.DOI
79. Jiayi Zhang, Tao Hu, Danqing Yi, Hongxuan Wang, Bin Wang (2018). Double-shell structure of Al3(Zr,Sc) precipitate induced by thermomechanical treatment of Al–Zr–Sc alloy cable. Journal of Rare Earths.DOI
80. Jiao Xu, Danqing Yi, Qiang Cui, Bin Wang (2018). Enhanced Wear Resistance of Ni/h-BN Composites with Graphene Addition Produced by Spark Plasma Sintering. Acta Metallurgica Sinica (English Letters).DOI
81. Bo Jiang, Fuhua Cao, Haisheng Wang, Danqing Yi, Yong Jiang, Fanghua Shen, Bin Wang, Huiqun Liu (2018). Effect of aging time on the microstructure evolution and mechanical property in an Al-Cu-Li alloy sheet. Materials Science and Engineering A.DOI
82. Bo Jiang, Gui-jie Li, Huiqun Liu, Danqing Yi, Ying Zhang, Renhao Xue, Quan Wen, Zhiyuan Liu, Liang Ning, Xianming Wang (2018). Superhydrophobic coating on heat-resistant steel surface fabricated by a facile method. Journal of Iron and Steel Research International.DOI
83. Jiayi Zhang, Hongxuan Wang, Danqing Yi, Bin Wang, Haisheng Wang (2018). Comparative study of Sc and Er addition on microstructure, mechanical properties, and electrical conductivity of Al-0.2Zr-based alloy cables. Materials Characterization.DOI
84. Qian Zhao, Huiqun Liu, Chunping Wu, Nana Li, Yong Ying Jiang, Danqing Yi (2018). Preferential oxidation of intermetallic compounds in Ag-2Sn-4La alloy. Corrosion Science.DOI
85. Yu Xiao, Huiqun Liu, Danqing Yi, Jianwen Le, Hangwei Zhou, Yong Jiang, Xiaolong Zhao, Zhanqian Chen, Jian Wang, Qi Gao (2018). High-Temperature Deformation Behavior of Ti-6Al-2Sn-4Zr-2Mo Alloy with Lamellar Microstructure Under Plane-Strain Compression. Journal of Materials Engineering and Performance.DOI
86. Haisheng Wang, Bo Jiang, Jiayi Zhang, Nanhai Wang, Danqing Yi, Bin Wang, Huiqun Liu (2018). The precipitation behavior and mechanical properties of cast Al-4.5Cu-3.5Zn-0.5Mg alloy. Journal of Alloys and Compounds.DOI
87. Chunping Wu, Qian Zhao, Nana Li, Haisheng Wang, Danqing Yi, Wei Weng (2018). Influence of fabrication technology on arc erosion of Ag/10SnO2 electrical contact materials. Journal of Alloys and Compounds.DOI
88. Bo Jiang, Danqing Yi, Xiaoou Yi, Feng Zheng, Haisheng Wang, Bin Wang, Huiqun Liu, Zhan Hu (2018). Effect of trace amounts of added Sc on microstructure and mechanical properties of 2055 aluminum alloy. Materials Characterization.DOI
89. Yacen Zhang, Huiqun Liu, Danqing Yi, Bin Wang, Yong Jiang, Tao Hu, Yu Xiao, Qi Yang, Jian Wang, Qi Gao (2018). Stress-induced α″ phase in a beta Ti–19Nb–1.5Mo–4Zr–8Sn alloy. Materials Characterization.DOI
90. Jing Chen, Huiqun Liu, Ruiqian Zhang, Gang Li, Danqing Yi, Gaoyong Lin, Zhen Guo, Shaoqiang Liu (2018). High-temperature deformation and processing maps of Zr-4 metal matrix with dispersed coated surrogate nuclear fuel particles. Results in Physics.DOI
91. Caogen Yao, Huiting Lv, Danqing Yi, Songhe Meng, Lairong Xiao, Boxiang Wang (2018). Microstructures and Mechanical Properties of Inconel 718 Alloy at Ultralow Temperatures. Journal of Materials Engineering and Performance.DOI
92. Yilan Jiang, Huiqun Liu, Danqing Yi, Gaoyong Lin, Xun Dai, Ruiqian Zhang, Yongduo Sun, Shaoqiang Liu (2018). Microstructure evolution and recrystallization behavior of cold-rolled Zr-1Sn-0.3Nb-0.3Fe-0.1Cr alloy during annealing. Transactions of Nonferrous Metals Society of China.DOI
93. Shang Fu, Huiqun Liu, N. D. Qi, Bin Wang, Yong Jiang, Zhiquan Chen, Tao Hu, Danqing Yi (2018). On the electrostatic potential assisted nucleation and growth of precipitates in Al-Cu alloy. Scripta Materialia.DOI
94. 赵连风，易丹青，王斌，刘会群，秦泽华，李赛维（2017）. 7075铝合金的梯度时效及其温度场模拟. 《粉末冶金材料科学与工程》.
95. 姚草根，孟烁，李秀林，易丹青，吕宏军，王斌（2017）. 粉末氧含量对热等静压FGH4169合金力学性能与组织的影响. 《粉末冶金材料科学与工程》.
96. 王琪，阳文豪，许艳飞，王斌，易丹青（2017）. 烧结工艺对TA15粉末冶金钛合金组织与性能的影响. 《粉末冶金材料科学与工程》.
97. 陈宇强，潘素平，易丹青，刘文辉，蔡志华，唐昌平（2017）. 2E12铝合金均匀化过程微观组织演变规律. 《中南大学学报(自然科学版)》.
98. 李文贤，易丹青，刘会群，王斌（2017）. 热处理制度对选择性激光熔化成形TC4钛合金的组织与力学性能的影响. 《粉末冶金材料科学与工程》.
99. 许艳飞，王章，肖逸锋，文璟，阳文豪，易丹青，刘会群，吴靓，钱锦文（2017）. 低温轧制对生物医用Ti-25Nb-10Ta-1Zr-0.2Fe合金组织和性能的影响. 《材料热处理学报》.
100. Qiao Xiao, Xiaoou Yi, Bo Jiang, Zehua Qin, Jun Ping Hu, Yong Jiang, Huiqun Liu, Bin Wang, Danqing Yi (2017). In-situ synthesis of graphene on surface of copper powder by rotary CVD and its application in fabrication of reinforced Cu-matrix composites. Advanced Material Science.DOI
101. Jiayi Zhang, Mingyang Ma, Fanghua Shen, Danqing Yi, Bin Wang (2017). Influence of deformation and annealing on electrical conductivity, mechanical properties and texture of Al-Mg-Si alloy cables. Materials Science and Engineering A.DOI
102. Shang Fu, Ying Zhang, Huiqun Liu, Danqing Yi, Bin Wang, Yong Jiang, Zhiquan Chen, Ning Qi (2017). Influence of electric field on the quenched-in vacancy and solute clustering during early stage ageing of Al-Cu alloy. Journal of Material Science and Technology.DOI
103. Hangwei Zhou, Huiqun Liu, Danqing Yi, Yu Xiao, Xiaolong Zhao, Jian Wang, Qi Gao (2017). Effect of α phase on fatigue crack growth of Ti-6242 alloy. Journal of Iron and Steel Research International.DOI
104. Ting Li, Danqing Yi, Junfeng Hu, Jiao Xu, Junlei Liu, Bin Wang (2017). Surface modification of h-BN and its influence on the mechanical properties of CuSn10/h-BN composites. Journal of Alloys and Compounds.DOI
105. Xiyi Zhou, Danqing Yi, Lars Nyborg, Zhan Hu, Jing Huang, Yu Juan Cao (2017). Influence of Ag addition on the microstructure and properties of copper-alumina composites prepared by internal oxidation. Journal of Alloys and Compounds.DOI
106. Xinyang Jiang, Ying Zhang, Danqing Yi, Haisheng Wang, Xianbo Deng, Bin Wang (2017). Low-temperature creep behavior and microstructural evolution of 8030 aluminum cables. Materials Characterization.DOI
107. Jiayi Zhang, Xinyang Jiang, Mingyang Ma, Bo Jiang, Bin Wang, Danqing Yi (2017). Effect of scandium micro-alloying on the creep resistance properties of Al-0.7Fe alloy cables. Materials Science and Engineering A.DOI
108. 许艳飞，文璟，肖逸锋，王章，阳文豪，易丹青，刘会群，吴靓，钱锦文（2016）. 双级时效对Ti-25Nb-10Ta-1Zr-0.2Fe医用β钛合金显微组织与力学性能的影响. 《中国有色金属学报》.
109. 唐性宇，易若玮，寿文彬，王培，王斌，易丹青（2016）. 2055铝-锂合金的均匀化热处理. 《轻合金加工技术》.
110. 周晓舟，易丹青，刘会群，王斌，高颀，王鼎春（2016）. 显微组织对TC18钛合金高温力学性能的影响. 《热加工工艺》.
111. 黄翔，易丹青，王斌，刘会群，陈丽勇，李会会，朱慧娟（2016）. V和Cr对超细WC-Co硬质合金Co粘结相成分与WC/Co界面组织结构的影响. 《粉末冶金材料科学与工程》.
112. 廖国健，谢文，易丹青（2016）. 固溶体成分与加量对硬质合金组织和性能的影响. 《硬质合金》.
113. 吴春萍，易丹青，翁桅，李素华，周孑民（2016）. 合金元素对Ag/MeO电接触材料电弧侵蚀形貌的影（英文）. Transactions of Nonferrous Metals Society of China.
114. 许安，杨阳，李伟洲，秦泽华，岑广，刘会群，易丹青（2016）. 扩散阻挡层对NiCrAlYSi涂层不同条件下热腐蚀行为的影响. 《中南大学学报(自然科学版)》.
115. 李秀林，易丹青，刘会群，王斌，任岩（2016）. 长石釉对MoSi2发热体低温抗氧化性的影响. 《陶瓷学报》.
116. 田哲，易丹青，刘会群，王斌（2016）. Al-5.8Cu-0.6Mg-0.6Ag-0.3Nd合金的热变形行为研究. 《热加工工艺》.
117. Xiaoou Yi, Xiang Hong Huang, Changbin Liu, Danqing Yi, Yong Qiang Jiang, Bin Wang, Hui-Qun Liu, Liyong Chen (2016). Effect of Cooling Rate on the Formation and Morphology of (W,V)C x in VC-doped WC–Co Cemented Carbide. Acta Metallurgica Sinica (English Letters).DOI
118. Shunping Sun, Xiaoping Li, Jie Yang, Hongjin Wang, Yong Jiang, Danqing Yi (2016). Point defect concentrations of L1 2 ‐Al 3 X(Sc, Zr, Er). Rare Metals.DOI
119. Xiaoxuan Tu, Danqing Yi, Jing Bo Wu, Bin Wang (2016). Influence of Ce addition on Sn-3.0Ag-0.5Cu solder joints: Thermal behavior, microstructure and mechanical properties. Journal of Alloys and Compounds.DOI
120. Qiao Xiao, Huiqun Liu, Danqing Yi, Deyan Yin, Yuqiang Chen, Ying Zhang, Bin Wang (2016). Effect of Cu content on precipitation and age-hardening behavior in Al-Mg-Si-xCu alloys. Journal of Alloys and Compounds.DOI
121. Fanghua Shen, Danqing Yi, Bin Wang, Huiqun Liu, Yong Jiang, Cong Tang, Bo Jiang (2016). Semi-quantitative evaluation of texture components and anisotropy of the yield strength in 2524 T3 alloy sheets. Materials Science and Engineering A.DOI
122. Fanghua Shen, Bin Wang, Huiqun Liu, Yong Jiang, Cong Tang, Wenbin Shou, Suping Pan, Yuqiang Chen, Danqing Yi (2016). Effects of secondary particle-induced recrystallization on fatigue crack growth in AA2524/Al Cu Mg T3 alloy sheets. Journal of Alloys and Compounds.DOI
123. Fanghua Shen, Bin Wang, Danqing Yi, Huiqun Liu, Cong Tang, Wenbin Shou (2016). Effects of heating rate during solid-solution treatment on microstructure and fatigue properties of AA2524 T3 Al–Cu–Mg sheet. Materials & Design.DOI
124. Ruowei Yi, Huiqun Liu, Danqing Yi, Weifeng Wan, Bin Wang, Yong Jiang, Qi Yang, Dingchun Wang, Qi Gao, Yanfei Xu, Qian Tang (2016). Precipitation hardening and microstructure evolution of the Ti–7Nb–10Mo alloy during aging. Materials Science and Engineering C.DOI
125. Wenbin Shou, Danqing Yi, Ruowei Yi, Huiqun Liu, Zihao Bao, Bin Wang (2016). Influence of electric field on microstructure and mechanical properties of an Al-Cu-Li alloy during ageing. Materials & Design.DOI
126. Weifeng Wan, Danqing Yi, Huiqun Liu, Yong Jiang, Ruowei Yi, Qi Yang, Dingchun Wang, Qi Gao, Yanfei Xu (2016). Observation and characterization of isothermal α″ in a new β-type titanium alloy. Philosophical Magazine Letters.DOI
127. Wenbin Shou, Danqing Yi, H. Q. Liu, Changping Tang, Fanghua Shen, Boxiang Wang (2016). Effect of grain size on the fatigue crack growth behavior of 2524-T3 aluminum alloy. Archives of Civil and Mechanical Engineering.DOI
128. Deyan Yin, Qiao Xiao, Yuqiang Chen, Huiqun Liu, Danqing Yi, Bin Wang, Suping Pan (2016). Effect of natural ageing and pre-straining on the hardening behaviour and microstructural response during artificial ageing of an Al–Mg–Si–Cu alloy. Materials & Design.DOI
129. Fanghua Shen, Danqing Yi, Yong Jiang, Bin Wang, Huiqun Liu, Cong Tang, Wenbin Shou (2016). Semi-quantitative evaluation of texture components and fatigue properties in 2524 T3 aluminum alloy sheets. Materials Science and Engineering A.DOI
130. Chunping Wu, Danqing Yi, Wei Weng, Suhua Li, Jiemin Zhou (2016). Influence of alloy components on arc erosion morphology of Ag/MeO electrical contact materials. Transactions of Nonferrous Metals Society of China.DOI
131. 李会会，易丹青，高跃红，黄翔，刘会群，赵声志，张忠健，王斌，彭宇（2015）. WC-Co硬质合金冲击疲劳行为的研究. 《硬质合金》.
132. 田哲，易丹青，刘会群，王斌，涂晓萱，江勇，唐聪（2015）. 固溶处理对Al-5.8Cu-0.6Mg-0.6Ag-0.3Nd合金组织和力学性能的影响. 《中国有色金属学报》.
133. 陈宇强，潘素平，易丹青，刘文辉，唐昌平，唐思文（2015）. 2E12合金均匀化处理工艺对微观组织的影响. 《材料热处理学报》.
134. 陈宇强，潘素平，姚素娟，易丹青（2015）. 温度梯度区域熔化对Al-Cu-Mg合金第二相析出及其性能的影响. 《稀有金属材料与工程》.
135. 王琪，傅上，王斌，易丹青（2015）. 应力/电场耦合作用对2524铝合金时效动力学影响. 《稀有金属材料与工程》.
136. 赵连风，易丹青，刘欢，王琪，王斌（2015）. M42高速钢/X32弹簧钢电子束焊接温度场的数值模拟与实验研究. 《粉末冶金材料科学与工程》.
137. 冯春，寿文彬，刘会群，易丹青，冯耀荣（2015）. 石油钻杆用高强Al-Zn-Mg-Cu系铝合金的显微组织和力学性能（英文）. Transactions of Nonferrous Metals Society of China.
138. 李秀林，陈丽勇，易丹青，赵声志，张忠健，郑晓晨，王斌，刘会群，彭宇（2015）. WC-11Co硬质合金与不同岩石的摩擦磨损特性. 《粉末冶金材料科学与工程》.
139. 郭喜如，易丹青（2015）. 粉末高速钢与分齿型硬质合金带锯条锯切钛合金失效模式分析. 《企业技术开发》.
140. 朱慧娟，易丹青，周宏明，刘会群，王斌（2015）. La2O3增强增韧(Mo0.7,W0.3)Si2复合材料的作用机理. 《中国钼业》.
141. 徐道芬，易丹青（2015）. Mg-4Al-2RE合金压缩蠕变性能和组织研究. 《热加工工艺》.
142. Xiaoping Li, Shun-Ping Sun, Yu Yun, Hongjin Wang, Yong Jiang, Danqing Yi (2015). Composition and temperature dependences of site occupation for Al, Cr, W, and Nb in MoSi 2. Chinese Physics B.DOI
143. 许艳飞，肖逸锋，易丹青，刘会群，吴靓，文璟（2015）. 生物医用Ti-Nb-Ta-Zr-Fe合金在林格溶液中的腐蚀行为（英文）. Transactions of Nonferrous Metals Society of China.
144. Deyan Yin, Huiqun Liu, Yuqiang Chen, Danqing Yi, Bo Wang, Bin Wang, Fanghua Shen, Shang Fu, Cong Tang, Suping Pan (2015). Effect of grain size on fatigue-crack growth in 2524 aluminium alloy. International Journal of Fatigue.DOI
145. Liyong Chen, Danqing Yi, Bin Wang, Huiqun Liu, Chunping Wu (2015). Mechanism of the early stages of oxidation of WC–Co cemented carbides. Corrosion Science.DOI
146. Chun Feng, Wenbin Shou, Huiqun Liu, Danqing Yi, Yaorong Feng (2015). Microstructure and mechanical properties of high strength Al–Zn–Mg–Cu alloys used for oil drill pipes. Transactions of Nonferrous Metals Society of China.DOI
147. Xian Nie, Huiqun Liu, Xiaozhou Zhou, Danqing Yi, Baiyun Huang, Zhan Hu, Yanfei Xu, Qi Yang, Dingchun Wang, Qi Gao (2015). Creep of Ti–5Al–5Mo–5V–1Fe–1Cr alloy with equiaxed and lamellar microstructures. Materials Science and Engineering A.DOI
148. Yanfei Xu, Yi-feng XIAO, Danqing Yi, Huiqun Liu, Liang Wu, Jing Lin Wen (2015). Corrosion behavior of Ti–Nb–Ta–Zr–Fe alloy for biomedical applications in Ringer's solution. Transactions of Nonferrous Metals Society of China.DOI
149. Chunping Wu, Danqing Yi, Wei Weng, Suhua Li, Jiemin Zhou, Feng Zheng (2015). Arc erosion behavior of Ag/Ni electrical contact materials. Materials & Design.DOI
150. Yong Li, Danqing Yi, Jianbo Zhang (2015). Comparative study of the influence of Ag on the microstructure and mechanical properties of Cu-10Fe in situ composites. Journal of Alloys and Compounds.DOI
151. Q. K. Zhang, Bing Zou, X.F. Li, Z.Y. Chen, Z.Y. Chen, Zhiquan Chen, Zhiquan Chen, H.Q. Liu, Danqing Yi (2015). Effect of thermal treatment condition on the Ag precipitates in Al–Ag alloy studied by positron annihilation. Nuclear Instruments and Methods in Physics Research Section B Beam Interactions with Materials and Atoms.DOI
152. Weifeng Wan, Huiqun Liu, Yong Jiang, Danqing Yi, Ruowei Yi, Qi Gao, Dingchun Wang, Qi Yang (2015). Microstructure characterization and property tailoring of a biomedical Ti–19Nb–1.5Mo–4Zr–8Sn alloy. Materials Science and Engineering A.DOI
153. Liyong Chen, Danqing Yi, Bin Wang, Huiqun Liu, Chunping Wu, Xiang Hong Huang, Huihui Li, Yuehong Gao (2015). The selective oxidation behaviour of WC–Co cemented carbides during the early oxidation stage. Corrosion Science.DOI
154. Canhui Xu, Danqing Yi, Yong Jiang, Chunping Wu, Haibin Zhang, Shuming Peng (2015). The kinetics and interface microstructure evolution in the internal oxidation of Ag–3at.%Sn alloy. Corrosion Science.DOI
155. 吴春萍，王鸿宇，翁桅，李素华，周孑民，易丹青，徐国富（2014）. 电子探针分析方法及其在电接触材料研究中的应用. 《电工材料》.
156. 吴春萍，王鸿宇，翁桅，周孑民，易丹青（2014）. 制备工艺对AgSnO2（6.32）Sb2O3（3.69）触头材料组织与性能的影响. 《电工材料》.
157. 江川，易丹青，周宏明，刘会群，朱慧娟（2014）. MoSi2发热元件高温通电氧化成膜规律. 《中国钼业》.
158. 傅上，易丹青，刘会群，江勇，王斌，胡湛（2014）. 外场应力对Al-Cu合金中θ″相形貌及析出行为的影响(英文). Transactions of Nonferrous Metals Society of China.
159. 罗康，臧冰，傅上，江勇，易丹青（2014）. 铝合金应力/应变时效机制的第一性原理研究(英文). Transactions of Nonferrous Metals Society of China.
160. 王琪，傅上，王斌，易丹青，王宏伟，周明哲（2014）. 应力-电场耦合时效对2524铝合金微观组织的影响. 《中南大学学报(自然科学版)》.
161. 王琪，文智，江川，王斌，易丹青（2014）. TA15钛合金的高温蠕变行为. 《粉末冶金材料科学与工程》.
162. 李会会，王斌，易丹青，刘会群，黄翔，田哲（2014）. Mg-9Gd-3Y-0.3Zr合金的蠕变行为. 《粉末冶金材料科学与工程》.
163. 丁学锋，易丹青，王斌，于鹏超，成伟欣（2014）. TiC颗粒及其表面镀镍对H13钢烧结行为及组织与性能的影响. 《粉末冶金材料科学与工程》.
164. Ying Tao, Danqing Yi, Baojun Zhu, Wenpeng Cao (2014). One-Step Hydrothermal-Electrochemical Route to Carbon-Stabilized γ-Fe2O3 Powders. Journal of Superconductivity and Novel Magnetism.DOI
165. Canhui Xu, Yong Jiang, Danqing Yi, Haibin Zhang, Shuming Peng, Jian‐Hua Liang (2014). Interface-level thermodynamic stability diagram for in situ internal oxidation of Ag(SnO2)p composites. Journal of Materials Science.DOI
166. Xian Nie, Zhan Hu, Huiqun Liu, Danqing Yi, Chen Ti-ying, Bingfeng Wang, Qi Gao, Ding-chun Wang (2014). High temperature deformation and creep behavior of Ti–5Al–5Mo–5V–1Fe–1Cr alloy. Materials Science and Engineering A.DOI
167. Shang Fu, Danqing Yi, Huiqun Liu, Yong Jiang, Bin Wang, Zhan Hu (2014). Effects of external stress aging on morphology and precipitation behavior of θ″ phase in Al-Cu alloy. Transactions of Nonferrous Metals Society of China.DOI
168. 文智，易丹青，王斌，石绍清，张燕可（2013）. 稀土对T91耐热钢动态再结晶行为影响. 《工程科学学报》.
169. 臧冰，易丹青，刘欢，江勇，王斌（2013）. 单轴拉应力下铝空位形成能和自扩散激活能的计算. 《中南大学学报(自然科学版)》.
170. 刘欢，王琪，易丹青，王斌，臧冰（2013）. Mg-6.3Zn-0.7Zr-0.9Y-0.3Nd合金高温变形行为及热加工图. 《中南大学学报(自然科学版)》.
171. 王博，易丹青，丁学锋，姚草根，王斌，傅上（2013）. FGH4169合金的高温变形行为. 《中南大学学报(自然科学版)》.
172. 王斌，易丹青，刘会群（2013）. 材料工程类本科生实践教学改革的探索. 《实验室研究与探索》.
173. 孙顺平，李小平，卢雅琳，李勇，黄道远，易丹青（2013）. 基于Miedema模型Al3X（Sc,Er,Zr,Li）点缺陷形成焓的计算. 《稀有金属材料与工程》.
174. 张艳可，易丹青，王斌，邓殊皓，聂灿，文智（2013）. 乙酸对P110油管钢在H2S环境中腐蚀行为的影响. 《粉末冶金材料科学与工程》.
175. 于鹏超，易丹青，胡彬，刘会群（2013）. 化学镀Ni包覆TiC复合粉体的制备及显微组织. 《中国有色金属学报》.
176. 李伟洲，李月巧，易丹青，刘会群，孙超（2013）. 不同冷热循环条件下NiCrAlY涂层体系的微观组织演变规律及失效机理. 《中国有色金属学报》.
177. 孙顺平，李小平，于赟，卢雅琳，臧冰，易丹青，江勇（2013）. L12-Al3Li金属间化合物点缺陷浓度的第一原理计算. 《中国有色金属学报》.
178. 孙顺平，李小平，雷卫宁，王洪金，汪贤才，江海锋，李仁兴，江勇，易丹青（2013）. 基于第一性原理L12-Al3Sc点缺陷结构及成键行为的计算. 《中国有色金属学报》.
179. 郭磊，易丹青，臧冰，王斌，刘会群，柳公器（2013）. 挤压比对AA8030铝合金棒材组织及电性能的影响. 《中国有色金属学报》.
180. 罗康，江勇，易丹青，傅上，臧冰（2013）. 应变时效过程中析出相界面Al/θ′的能量响应. 《中国有色金属学报》.
181. 李月巧，李伟洲，刘会群，易丹青，Albano CAVALEIRO（2013）. Nb-Cr基涂层的微观结构及初期氧化. 《中国有色金属学报》.
182. 文智，易丹青，王斌，张艳可（2013）. Al-6Mg-0.4Mn-0.2Sc铝合金的高温变形行为及热加工图. 《中南大学学报(自然科学版)》.
183. 洪天然，易丹青，周明哲，王宏伟，丁珣（2013）. 电场对2E12铝合金时效微观组织和动力学的影响. 《中南大学学报(自然科学版)》.
184. 汪波，易丹青，陈宇强，王斌，李泽英（2013）. 2E12铝合金在冷轧和退火过程中织构和显微组织的演变. 《中国有色金属学报》.
185. 王琪，文智，王斌，易丹青，钱锋（2013）. 粉末冶金TA15钛合金的高温塑性变形行为. 《粉末冶金材料科学与工程》.
186. 吴春萍，易丹青，许灿辉，周孑民，瓮桅（2013）. Ag-Sn-La合金粉末的氧化组织研究. 《稀有金属材料与工程》.
187. 王琪，钱锋，易丹青，王宏伟，王斌，臧冰（2013）. 粉末冶金TA15钛合金高温塑性变形加工图. 《稀有金属材料与工程》.
188. 何德生，易丹青，易绿林，朱亿鹏，刘维涛，王熹（2013）. UG标准件库在盐芯压模和活塞浇注模中的应用. 《特种铸造及有色合金》.DOI
189. 黄道远，易丹青，李劼，王万林（2013）. 471和3555两种硬质合金的高温氧化行为. 《材料热处理学报》.
190. Ying Tao, Danqing Yi, Baojun Zhu (2013). One-Step Hydrothermal–Electrochemical Route to Carbon-Stabilized Anatase Powders. Journal of Electronic Materials.DOI
191. Caogen Yao, B. Wang, Boxiang Wang, Danqing Yi, Boxiang Wang, B. Wang, Xianfei Ding (2013). Artificial neural network modelling to predict hot deformation behaviour of as HIPed FGH4169 superalloy. Materials Science and Technology.DOI
192. Danqing Yi, Pengchao Yu, Bin Hu, Huiqun Liu, Bin Wang, Yong Jiang (2013). Preparation of nickel-coated titanium carbide particulates and their use in the production of reinforced iron matrix composites. Materials & Design (1980-2015).DOI
193. Y.Q. Chen, Suping Pan, Mi Zhou, Danqing Yi, Da Zhen Xu, Yujie Xu (2013). Effects of inclusions, grain boundaries and grain orientations on the fatigue crack initiation and propagation behavior of 2524-T3 Al alloy. Materials Science and Engineering A.DOI
194. Liyong Chen, Bin Wang, Danqing Yi, Huiqun Liu (2013). Non-isothermal oxidation kinetics of WC–6Co cemented carbides in air. International Journal of Refractory Metals and Hard Materials.DOI
195. Yuhan Chen, Danqing Yi, Yong Jiang, Boxiang Wang, Da Zhen Xu, S. C. Li (2013). Twinning and orientation relationships of T-phase precipitates in an Al matrix. Journal of Materials Science.DOI
196. Hongming Zhou, Yan-jun Guo, Jian Li, Danqing Yi, Lairong Xiao (2012). Microstructure and mechanical properties of 8YSZ ceramics by liquid-phase sintering with CuO-TiO2 addition. Journal of Central South University.DOI
197. 易丹青（2012）. 金属硅化物. 《冶金工业出版社》.
198. 易丹青，陈丽勇，刘会群，王斌，聂灿（2012）. 硬质合金电化学腐蚀行为的研究进展. 《硬质合金》.
199. 刘会群，易丹青，王斌，杨伏良（2012）. 提高理工科本科专业教育质量的几点建议. 《湖南工业职业技术学院学报》.
200. 吴春萍，易丹青，许灿辉，周孑民，瓮桅（2012）. 银基合金研究现状与发展趋势. 《电工材料》.
201. 王琪，文智，易丹青，王斌，王福晶，肖东东，陈振湘（2012）. TA15钛合金高温氧化行为. 《粉末冶金材料科学与工程》.
202. 许艳飞，易丹青，湛永钟，孙顺平，刘会群（2012）. Zr和Ce对Ti-11Si亚共晶合金组织及压缩性能的影响. 《材料热处理学报》.
203. 陈宇强，易丹青，周明哲，潘素平，刘会群（2012）. 粗大第二相和晶界对于2524铝合金疲劳行为的影响. 《第16届全国疲劳与断裂学术会议》.
204. 王盼，郑长黎，文继舫，易丹青，刘会群（2012）. 新型医用钛合金Ti-25Nb-10Ta-1Zr-0.2Fe的细胞毒性研究. 《中南大学学报(医学版)》.
205. 臧冰，易丹青，孙顺平，王斌，刘欢，柳公器（2012）. 冷拉拔对Al-Zr-(RE)合金硬度的影响及人工神经网络预测. 《中国有色金属学报》.
206. 王琪，王斌，易丹青，刘会群，臧冰，文智（2012）. 二次挤压对MB26镁合金棒材组织及性能的影响. 《中国有色金属学报》.
207. 周明哲，易丹青，王斌，黄道远（2012）. 固溶处理对2E12铝合金组织及疲劳断裂行为的影响. 《中南大学学报(自然科学版)》.
208. 肖东东，刘立斌，易丹青，王福晶（2012）. T91铁素体耐热钢相变行为和微观组织研究. 《热加工工艺》.
209. 陈缇萦，聂西安，易丹青，刘会群（2012）. TC18钛合金高温变形行为与加工图. 《热加工工艺》.
210. 许艳飞，刘会群，易丹青，朱知寿，郑峰（2012）. TC21钛合金α′′马氏体中的反相畴界状结构(英文). Transactions of Nonferrous Metals Society of China.
211. 王福晶，易丹青，王斌，石绍清，张金菊，陈振湘，肖东东（2012）. 冷却方式对T91钢连铸坯组织及性能的影响. 《粉末冶金材料科学与工程》.
212. 刘会群，易丹青，许艳飞，高颀，李献民（2012）. 固溶时效对医用β钛合金冲击疲劳性能的影响. 《第16届全国疲劳与断裂学术会议会议程序册》.
213. Yin De-yan, Zhou Mingzhe, Qi Ning, Chen Zhiquan, YI Dan-qing (2012). Precipitation Behavior of Al-Cu-Mg Alloy During Electric Field-Assisted Aging. Journal of Materials Engineering and Performance.DOI
214. N. D. Qi, Yanlin Jia, Hui-Qun Liu, Danqing Yi, Zhiquan Chen (2012). The Evolution of Defects in Deformed Cu-Ni-Si Alloys during Isochronal Annealing Studied by Positron Annihilation. Chinese Physics Letters.DOI
215. Chunping Wu, Danqing Yi, S. Goto, Canhui Xu, Weixiong Weng, Jixue Zhou, Guofu Xu (2012). Oxidation of Ag–Sn–Sb alloy powders. Materials and Corrosion.DOI
216. Yanfei Xu, Huiqun Liu, Danqing Yi, Zhishou Zhu, Feng Zheng (2012). Antiphase boundary-like structure in α″ martensite of TC21 titanium alloy. Transactions of Nonferrous Metals Society of China.DOI
217. W.Z. Li, Danqing Yi, Y.Q. Li, H.Q. Liu, C. Sun (2012). Corrigendum to “Effects of the constitution of CrON diffusion barrier on the oxidation resistance and interfacial fracture of duplex coating system” [J. Alloys Compd. 518 (2012) 86–95]. Journal of Alloys and Compounds.DOI
218. Yujie Xu, Danqing Yi, H.Q. Liu, Xiaobin Wu, Boxiang Wang, Fan Yang (2012). Effects of cold deformation on microstructure, texture evolution and mechanical properties of Ti–Nb–Ta–Zr–Fe alloy for biomedical applications. Materials Science and Engineering A.DOI
219. Hongming Zhou, Jian Li, Danqing Yi (2012). Microstructures and Mechanical Properties of Hot-Pressed -Matrix Composites Reinforced with SiC and Particles. ISRN Materials Science.DOI
220. Canhui Xu, Danqing Yi, Chunping Wu, Huiqun Liu, Weizhou Li (2012). Microstructures and properties of silver-based contact material fabricated by hot extrusion of internal oxidized Ag–Sn–Sb alloy powders. Materials Science and Engineering A.DOI
221. W.Z. Li, Danqing Yi, Y.Q. Li, H.Q. Liu, C. Sun (2012). Effects of the constitution of CrON diffusion barrier on the oxidation resistance and interfacial fracture of duplex coating system. Journal of Alloys and Compounds.DOI
222. 周宏明，曾麟，易丹青，李荐，贾晓慧，郭雁军（2011）. 电泳沉积制备BG/BG-FHA复合涂层. 《复合材料学报》.
223. 周宏明，曾麟，易丹青，郭雁军，贾晓慧，刘珊，何俊杰（2011）. FHA粉末的制备及相结构和热稳定性. 《中南大学学报(自然科学版)》.
224. 张金菊，易丹青，王斌，王福晶（2011）. 15Cr2Ni3MoW钢管穿孔顶头氧化膜制备工艺的研究. 《热加工工艺》.
225. 朱志雄，刘玉龙，曹志强，易丹青，李志成，张鸿（2011）. SWRCH8A冷镦钢变形组织与腐蚀性能研究. 《金属制品》.
226. 李勇，易丹青，柳瑞清（2011）. 时效对Cu-Ag-Fe合金组织及性能的影响. 《材料热处理学报》.
227. 陈宇强，易丹青，潘素平，黄霞，周明哲，王斌（2011）. 蠕变温度对Al-Cu-Mg合金晶内S’相析出过程的影响. 《稀有金属材料与工程》.
228. 廉才浩，易丹青，刘会群，杨伏良，田亮（2011）. 新型β钛合金Ti-25Nb-10Ta-1Zr-0.2Fe的固溶时效行为. 《稀有金属材料与工程》.
229. 孙顺平，易丹青，陈振湘，周明哲，王斌（2011）. Er在Al-Mg-Si合金中的存在形式及其热力学分析. 《材料热处理学报》.DOI
230. 周明哲，易丹青，蔡金伶，王宏伟，芦禹（2011）. 热暴露对航空用2E12铝合金组织演变及疲劳性能的影响. 《材料热处理学报》.DOI
231. 李勇，易丹青，柳瑞清，孙顺平（2011）. Cu-Ag-Fe合金的电接触滑动磨损的研究. 《材料科学与工艺》.
232. 陈响明，易丹青，李秀萍，王以任，刘会群（2011）. 硬质合金复合涂层的结合强度与失效机理. 《粉末冶金材料科学与工程》.
233. 李勇，易丹青，柳瑞清，孙顺平（2011）. 时效处理对形变Cu-10Fe-3Ag原位复合材料组织及性能的影响. 《中国有色金属学报》.
234. 许灿辉，易丹青，曹适意，刘会群，吴春萍，孙顺平，刘润勇（2011）. Ag-SnO2复合材料的热压缩变形行为. 《中国有色金属学报》.
235. 陈响明，易丹青，黄道远，李秀萍，刘会群，吴春萍（2011）. 化学气相沉积硬质合金TiN/TiCN/Al2O3/TiN多层涂层的抗氧化性能. 《中国有色金属学报》.
236. 蔡金伶，易丹青，王宏伟，王斌（2011）. Ag对Al-Cu-Mg合金Ω相析出行为的影响. 《中国有色金属学报》.
237. Yanfei Xu, Danqing Yi, H.Q. Liu, Boxiang Wang, Fan Yang (2011). Age-hardening behavior, microstructural evolution and grain growth kinetics of isothermal ω phase of Ti–Nb–Ta–Zr–Fe alloy for biomedical applications. Materials Science and Engineering A.DOI
238. 周明哲，易丹青，贾延琳，刘阳平（2010）. 预变形对2E12铝合金时效析出过程的影响. 《稀有金属材料与工程》.
239. 王斌，易丹青，顾威，王宏伟，吴春萍，方西亚（2010）. ZK60镁合金型材挤压过程有限元数值模拟. 《材料科学与工艺》.
240. 曾麟，周宏明，易丹青，郭雁军，罗佳，刘芙蓉（2010）. FHA的热物性能及生物活性研究. 《功能材料》.
241. 周宏明，易丹青，李丹，肖来荣，柳公器（2010）. Si3N4（p）/SiC（w）强韧化MoSi2基复合材料的显微组织与力学性能. 《粉末冶金技术》.
242. 周宏明，曾麟，易丹青，郭雁军，刘芙蓉（2010）. FHA涂层的制备及生物活性. 《材料研究学报》.
243. 周明哲，易丹青，尹德艳，洪天然，黄道远（2010）. 电场对2E12铝合金中S相析出动力学的影响. 《中国有色金属学报》.
244. 孙顺平，易丹青，臧冰（2010）. 基于Butler方程Al-Mg-Er三元合金表面张力的计算. 《中国有色金属学报》.
245. 陈宇强，易丹青，潘素平，黄霞，王斌，周明哲（2010）. 温度对2024铝合金蠕变行为的影响. 《中国有色金属学报》.
246. 王宏伟，易丹青，王斌，蔡金伶，钱锋，陈缇萦（2010）. Mg-6.3Zn-0.7Zr-0.9Y-0.3Nd镁合金的高温塑性变形行为的热压缩模拟. 《中国有色金属学报》.
247. 王斌，易丹青，方西亚，刘会群，吴春萍（2010）. ZK60及ZK60(0.9Y)镁合金高温变形行为的热模拟研究. 《稀有金属材料与工程》.
248. 许灿辉，易丹青，吴春萍，王斌（2010）. 机械球磨Ag-Zn合金粉末显微组织及内氧化性能. 《稀有金属材料与工程》.
249. 孙顺平，易丹青，臧冰（2010）. 基于Miedema模型和Toop模型的Al-Si-Er合金热力学参数计算. 《稀有金属材料与工程》.
250. 潘素平，易丹青，陈宇强，林红吉，王斌，周明哲（2010）. 表面机械处理对5×××铝合金/涂层体系的结合强度和晶间腐蚀性能的影响. 《中国有色金属学报》.
251. 姚素娟，易丹青，李旺兴（2010）. 热处理对Mg-5Gd-0.5Sc-Mn合金组织与力学性能的影响. 《材料热处理学报》.DOI
252. 李勇，易丹青（2010）. Cu-0.1Ag-0.1Fe合金的相变动力学. 《材料热处理学报》.DOI
253. Ming-Zhe Zhou, Yi Danqing, Hui-Qun Liu, Wen-Juan Liu, Zheng Feng (2010). Enhanced fatigue crack propagation resistance of an Al–Cu–Mg alloy by artificial aging under influence of electrical field.DOI
254. Yong Li, YI Dan-qing (2010). Dynamics of phase transformation in Cu-Fe-Ag alloy. Cailiao rechuli xuebao.
255. Danqing Yi, Mingzhe Zhou, Huiqun Liu, Bin Wang, Sheng Li Yang (2010). Effect of Temperature and Corrosive Environment on Cyclic Fatigue and Final Fracture Behavior of 2524 Aluminum Alloy. International Journal of the Society of Materials Engineering for Resources.DOI
256. 李智燕，易丹青，周明哲（2009）. 电场时效对2E12铝合金力学性能和微观组织的影响. 《中国有色金属学报》.
257. 朱志雄，张鸿，刘超峰，齐卫宏，易丹青，李志成（2009）. Ni-Al合金凝固过程的分子动力学模拟. 《中国有色金属学报》.
258. 吴春莺，易丹青，周宏明，李智燕（2009）. 含钇银合金硫化腐蚀行为的研究及其对力学性能的影响. 《稀有金属》.
259. 李智燕，易丹青，李荐，吴春莺（2009）. 电场对2E12铝合金时效硬化曲线和微观组织的影响. 《材料科学与工程学报》.
260. 李璐君，朱志雄，曹志强，田树生，易丹青，张鸿（2009）. SWRCH15A冷镦钢形变特征与组织结构研究. 《材料导报》.
261. 周宏明，易丹青，柳公器，肖来荣（2009）. Si3N4（p）/SiC（w）协同复合MoSi2材料的强韧化及机理研究. 《稀有金属材料与工程》.
262. 周宏明，易丹青，柳公器（2009）. SiC晶须与Si3N4颗粒强韧MoSi2复合材料. 《材料研究学报》.
263. 周宏明，柳公器，肖来荣，易丹青（2009）. Si3N4p-SiCw/MoSi2复合材料的强韧化效果与机制. 《机械工程材料》.
264. 李荐，彭振文，易丹青，罗佳（2009）. Al2O3-ZrO2/W/Cr/Ni/Co金属陶瓷的断裂韧性. 《材料科学与工程学报》.
265. 邓斌，易丹青，杨胜，王斌（2009）. 2E12铝合金加速腐蚀环境谱下的疲劳裂纹扩展. 《材料科学与工程学报》.
266. 杨伏良，易丹青，喻盈捷，李伟滋（2009）. 球料比对Al-Si合金材料组织与热物理性能的影响. 《粉末冶金技术》.
267. 王斌，易丹青，顾威，方西亚，刘会群，吴春萍，王宏伟（2009）. Mg-5.3Zn-0.8Zr镁合金高温变形行为的热模拟研究. 《中南大学学报(自然科学版)》.
268. 王斌，易丹青，方西亚，刘会群，吴春萍（2009）. ZK60镁合金高温动态再结晶行为的研究. 《材料工程》.
269. 柳公器，周宏明，肖来荣，易丹青，张路怀（2009）. Si3N4颗粒和纳米SiC晶须强韧化MoSi2基复合材料. 《材料科学与工程学报》.
270. 王斌，易丹青，罗文海，吴春萍，刘会群（2009）. SEM原位观察ZK60(0.9Y)镁合金板材的断裂行为. 《工程科学学报》.
271. 周宏明，易丹青（2009）. 低压等离子喷涂NiCoCrAlYTa涂层的高温氧化行为. 《机械工程材料》.
272. 王斌，易丹青，罗文海，方西亚，刘会群，吴春萍（2009）. Mg-4.9Zn-0.9Y-0.7Zr合金板材组织及力学性能的研究. 《航空材料学报》.
273. 孙顺平，易丹青，陈莹，吴春萍（2009）. Al-Er和Si-Er二元合金的热力学性质. 《中国有色金属学报》.
274. YI Dan-qing (2009). High-temperature Oxidation Behavior of Low-pressure Plasma Sprayed NiCoCrAlYTa Coatings. Materials for Mechanical Engineering.
275. Danqing Yi, Chunping Wu, S. Goto, Canhui Xu, Junfei Li, Boxiang Wang, Lairong Xiao, Feng Zheng (2009). Influence of ball‐milling on the oxidation behavior of Ag–Zn alloy powders. Materials and Corrosion.DOI
276. Xiaoping Fang, Danqing Yi, Jian‐Feng Nie (2009). Influence of solution treatments on the age-hardening response of Mg–Gd(–Mn–Sc) alloys. Journal of Alloys and Compounds.DOI
277. 姜媛媛，易丹青，李荐，张路怀，苏华，黄亮，彭振文（2008）. WC-9Ni-0.57Cr硬质合金在模拟海水中的腐蚀特性. 《材料科学与工程学报》.
278. 舒学鹏，肖来荣，易丹青，覃静丽，张路怀，张喜民（2008）. 锑黄铜组织与性能的研究. 《铸造》.
279. 肖来荣，覃静丽，易丹青，舒学鹏（2008）. Al、Ce对易切削铋黄铜组织和性能的影响. 《特种铸造及有色合金》.DOI
280. 覃静丽，肖来荣，易丹青，舒学鹏（2008）. 铋对无铅易切削黄铜性能的影响. 《材料科学与工程学报》.
281. 王斌，易丹青，刘会群，吴伯涛，袁均平（2008）. 回火温度对15Cr2Ni3MoW钢组织与力学性能的影响. 《材料热处理学报》.DOI
282. 方西亚，易丹青，王斌，罗文海，张鸿（2008）. Mg-Gd-Y-Mn合金挤压及时效过程中的组织与力学性能. 《材料热处理学报》.DOI
283. 杨洁，易丹青，邓姝皓（2008）. 微量稀土Nd对AZ91微观组织及腐蚀性能的影响. 《材料科学与工程学报》.
284. 张小娟，易丹青，方西亚，王斌，吴春萍（2008）. Mg-Gd-Sc-Mn耐热镁合金的热变形行为. 《中国稀土学报》.
285. 姚素娟，易丹青，梁冬梅，李旺兴（2008）. Sc对AZ91镁合金耐蚀性能的影响. 《稀有金属材料与工程》.
286. 许灿辉，易丹青，吴春萍，王斌，刘会群，卢小东（2008）. 添加剂对Ag-ZnO电触头材料组织与性能的影响. 《功能材料》.
287. 肖来荣，许谅亮，易丹青（2008）. 铌合金表面硅化物涂层热震行为研究. 《稀有金属》.
288. 杨伏良，易丹青，张伟（2008）. 高温空气氧化对高硅铝合金材料组织及物理性能的影响. 《中国有色金属学报》.
289. 周宏明，易丹青（2008）. 热障涂层用Dy2Zr2O7陶瓷粉末制备及其热物理性能研究. 《航空材料学报》.
290. 王斌，易丹青，吴春萍，罗文海，方西亚，刘会群（2008）. 稀土Y对ZK60合金板材退火组织与性能的影响. 《中国有色金属学报》.
291. 杨洁，易丹青，邓姝皓，王斌，柳公器（2008）. 微量Ce对AZ91镁合金微观组织及耐蚀性的影响. 《中国腐蚀与防护学报》.
292. 邓姝皓，易丹青，兰博，周伶玲，冀成年，赵丽红（2008）. 热处理对镁合金负极材料组织和性能的影响. 《电源技术》.
293. 姜媛媛，易丹青，谭映国，肖来荣，张路怀，黄亮（2008）. 熔渗法制备低铜W-Cu合金. 《粉末冶金材料科学与工程》.
294. 杨伏良，易丹青，张伟（2008）. 粉末氧化对高硅铝合金热挤压复合材料组织及力学性能的影响. 《机械工程材料》.
295. 周宏明，易丹青（2008）. 热压Si3N4/MoSi2复合材料的强韧化效果与机制. 《机械工程材料》.
296. Xi-Ya Fang, Yi Danqing, Bin Wang, Chun-Ping Wu, Hong Zhang (2008). Hot compression deformation behavior of the Mg-Al-Y-Zn magnesium alloy.DOI
297. Xiya Fang, Danqing Yi, Wenhai LUO, Bin Wang, Xiaojuan Zhang, Feng Zheng (2008). Effects of yttrium on recrystallization and grain growth of Mg-4.9Zn-0.7Zr alloy. Journal of Rare Earths.DOI
298. Jianhua Wang, Danqing Yi, Xuping Su, Fucheng Yin, Hongwu Li (2008). Properties of submicron AlN particulate reinforced aluminum matrix composite. Materials & Design (1980-2015).DOI
299. Xiya Fang, Danqing Yi, J.F. Nie, X.J. Zhang, Bing Peng Jia Wang, Lairong Xiao (2008). Effect of Zr, Mn and Sc additions on the grain size of Mg–Gd alloy. Journal of Alloys and Compounds.DOI
300. Shu-hao Deng, YI Dan-qing, Gong Zhu‐qing, Su Yuchang (2008). Influence of potential on the structure and properties of microarc oxidation coating on Mg alloy. Anti-Corrosion Methods and Materials.DOI
301. YI Dan-qing (2008). High-energy ball milling and characterization of Al-Si alloy powders. Journal of Central South University(Science and Technology).
302. YI Dan-qing (2008). Toughening Effect and Mechanism of Thermo-compressed Composite Si_3N_4/MoSi_2. Materials for Mechanical Engineering.
303. YI Dan-qing (2008). Phase structure and oxidation resistance of NiCoCrAlYTa coating prepared by LPPS. Journal of Central South University(Science and Technology).
304. YI Dan-qing (2008). Research on Preparation and Thermophysical Properties of Dy_2 Zr_2 O_7 Ceramic Powder. Hangkong cailiao xuebao.
305. Sheng Nan Yang, Danqing Yi, Hong Zhang, Sujuan Yao (2008). Flow stress behavior and processing map of Al-Cu-Mg-Ag alloy during hot compression. Journal of Wuhan University of Technology-Mater Sci Ed.DOI
306. Chunping Wu, Danqing Yi, Canhui Xu, Junfei Li, Boxiang Wang, Feng Zheng (2008). Microstructure of internally oxidized layer in Ag–Sn–Cu alloy. Corrosion Science.DOI
307. Chunping Wu, Danqing Yi, Canhui Xu, Jin‐Zhu Li, B. Wang, Xiaochen Lu, HanDong Zhang (2008). Oxidation of Ag–Sn–La Alloy Powders. Oxidation of Metals.DOI
308. 杨胜，易丹青，杨守杰，钟利（2007）. 温度对2E12铝合金疲劳性能与断裂机制的影响. 《航空材料学报》.
309. 周宏明，易丹青（2007）. 钴基高温合金表面电弧离子镀NiCrAlY涂层的抗高温氧化性能. 《机械工程材料》.
310. 姚素娟，易丹青，杨胜，李旺兴（2007）. Mg-5Gd-0．5Mn-0．5Sc合金T5态组织与力学性能. 《2007年全国博士生学术论坛（材料科学与工程学科）》.
311. 易丹青，李丹，李荐，周宏明（2007）. 粉末冶金法制备Nb-15Ti-11Al-10Si复合材料. 《稀有金属》.
312. 王建华，易丹青，苏旭平，王鑫铭（2007）. Al3Fe和Al9FeNi相在铝合金熔体中的溶解动力学. 《中国有色金属学报》.
313. 黄道远，易丹青，刘会群，蔡志刚，刘瑞，李荐（2007）. 硬质合金强度随温度的变化及失效机理的研究. 《材料热处理学报》.DOI
314. 邓姝皓，易丹青，龚竹青，苏玉长（2007）. 镁合金微弧氧化膜的制备工艺研究. 《材料科学与工艺》.
315. 姚素娟，李旺兴，杨胜，易丹青（2007）. 钇对AZ91镁合金微观组织及腐蚀性能影响的研究. 《中国稀土学报》.
316. 叶云，刘敏，易丹青，邝子奇，邓畅光，周宏明（2007）. 低压等离子喷涂YSZ热障涂层的组织结构. 《材料科学与工程学报》.
317. 杨胜，易丹青，杨守杰，钟利（2007）. 腐蚀环境下2E12航空铝合金疲劳裂纹扩展行为研究. 《材料工程》.
318. 杨胜，易丹青，姚素娟，钟利（2007）. 热处理对2E12铝合金耐腐蚀性及力学性能的影响. 《金属热处理》.
319. 姚素娟，易丹青，李旺兴，褚丙武（2007）. 高温镁合金的成分、组织设计与制备加工技术进展. 《轻金属》.
320. 肖来荣，许谅亮，易丹青，蔡志刚，王小宁（2007）. 复合包渗法制备铌合金表面硅化物涂层. 《航空材料学报》.
321. 杨胜，易丹青，邓斌，杨守杰，钟利（2007）. 预变形处理对2E12铝合金性能的影响. 《2007年全国博士生学术论坛（材料科学与工程学科）》.
322. 周宏明，易丹青，肖来荣（2007）. 化学沉淀法制备CeO2-La2O3-ZrO2陶瓷粉末. 《中国有色金属学报》.
323. 杨伏良，易丹青，刘泓，张伟（2007）. 高硅铝合金粉末的高温空气氧化预处理工艺. 《中国有色金属学报》.
324. 谢海根，易丹青，黄道远，李荐，刘刚，刘瑞（2007）. 超细晶硬质合金的制备. 《稀有金属与硬质合金》.
325. 王建华，易丹青，苏旭平，尹付成，王鑫铭（2007）. 2618铝合金形变热处理组织与热力学分析. 《特种铸造及有色合金》.DOI
326. 杨伏良，易丹青，刘泓，陈智虎（2007）. 高硅铝合金材料高温充氧氧化工艺. 《中南大学学报(自然科学版)》.
327. Huiqun Liu, Danqing Yi, Weiqi Wang, Liping Wang, Cai-hao LIAN (2007). Influence of Sc on high temperature strengthening behavior of Ti-6Al-4V alloy. Transactions of Nonferrous Metals Society of China.DOI
328. H.Q. Liu, Danqing Yi, Feng Zheng (2007). The influence of Sc on α/β transformation of Ti. Materials Science and Engineering A.DOI
329. Danqing Yi, Dan LI, Huiqun Liu, Chunping Wu, Hongming Zhou (2007). Microstructure and Oxidation Behavior of Mechanically Alloyed Nb-Based Multi-Phase Superalloy. Journal of Iron and Steel Research International.DOI
330. Jianhua Wang, Danqing Yi, Xuping Su, Fucheng Yin (2007). Influence of deformation ageing treatment on microstructure and properties of aluminum alloy 2618. Materials Characterization.DOI
331. Chunping Wu, Danqing Yi, Jingchao Chen, Jian Li, Huiqun Liu, Bin Wang, Xiya Fang (2007). Internal oxidation thermodynamics and microstructures of Ag-Y alloy. Transactions of Nonferrous Metals Society of China.DOI
332. Hongming Zhou, Danqing Yi, Zhi‐Ming Yu, Lairong Xiao, Jian Li (2007). Preparation of aluminum doped zinc oxide films and the study of their microstructure, electrical and optical properties. Thin Solid Films.DOI
333. YI Dan-qing (2007). Cyclic Oxidation Behavior of NiCrAlY Coating Deposited on Co Based High-temperature Alloy by ARC Ion Plating Technology. Materials for Mechanical Engineering.
334. 罗文海，易丹青，王斌，方西亚，顾威，周玲伶（2006）. 稀土Y对Mg-4.9Zn-0.7Zr合金组织及力学性能的影响. 《材料科学与工程学报》.
335. 王斌，易丹青，吴伯涛，刘会群（2006）. 无缝钢管穿孔顶头失效形式分析及提高使用寿命的研究进展. 《材料导报》.
336. 邓姝皓，易丹青，娄嘉，周玲伶（2006）. 镁合金脉冲阳极氧化工艺. 《电镀与涂饰》.
337. 卢斌，易丹青，严彪，殷俊林，刘会群，吴标理，陈小丽（2006）. Fe86Zr5Nb6B3非晶合金超高压烧结. 《稀有金属材料与工程》.
338. 周宏明，易丹青，余志明，肖来荣，李荐，王斌（2006）. 溶胶-凝胶法制备的ZnO:Al薄膜的微观结构及光学、电学性能. 《金属学报》.
339. 易丹青，刘会群，肖来荣，王斌，周宏明（2006）. MoSi2基复合材料组织性能的研究进展. 《材料导报》.
340. 周宏明，易丹青，石章智（2006）. MoSi2基高温结构材料的研究进展. 《材料导报》.
341. 刘瑞，易丹青，李荐（2006）. 纳米WC粉末的制备研究. 《材料科学与工程学报》.
342. 黄道远，易丹青，李荐，刘瑞，蔡志刚（2006）. 热震作用对硬质合金力学性能的影响及其失效机理. 《材料热处理学报》.
343. 周玲伶，易丹青，邓姝皓，王斌（2006）. 镁合金无铬微弧氧化新工艺. 《材料保护》.
344. 周玲伶，易丹青，邓姝皓，王斌（2006）. 镁合金环保型阳极氧化工艺研究. 《中国腐蚀与防护学报》.
345. 刘瑞，李荐，易丹青，黄道远，蔡志刚（2006）. 超细碳化钨粉末粒度测试方法的研究. 《稀有金属与硬质合金》.
346. 方西亚，易丹青，王斌，罗文海，顾威（2006）. Mg-6Al-1Zn-Y镁合金组织及力学性能的研究. 《稀有金属》.
347. 刘瑞，易丹青，李荐（2006）. 纳米WC制备过程中混料工艺及抑制剂作用的研究. 《矿冶工程》.
348. 肖来荣，许谅亮，易丹青，李荐，蔡志刚（2006）. C/C复合材料硅化物涂层形貌及结构. 《粉末冶金材料科学与工程》.
349. 李丹，易丹青，张霞，杨洁（2006）. Nb-38Ti-11Si-3Al新型高温合金的氧化行为. 《粉末冶金材料科学与工程》.
350. 杨伏良，张伟，易丹青，王日初，陈招科（2006）. 快速凝固喷射沉积制备Al-40Si组织分析. 《粉末冶金技术》.
351. 肖来荣，蔡志刚，易丹青，刘瑞（2006）. Mo-Si材料相组成与热膨胀性能的研究. 《航空材料学报》.
352. 肖来荣，蔡志刚，易丹青，向彩文，许谅亮（2006）. MoSi2涂层的组织结构与高温抗氧化性能. 《中国有色金属学报》.
353. 许谅亮，张霞，肖来荣，易丹青（2006）. Nb-Ti-Al高温铌合金氧化行为研究. 《稀有金属与硬质合金》.
354. Xiya Fang, Danqing Yi, Bin Wang, Wenhai LUO, Wei Gu (2006). Effect of yttrium on microstructures and mechanical properties of hot rolled AZ61 wrought magnesium alloy. Transactions of Nonferrous Metals Society of China.DOI
355. J. H. Wang, Danqing Yi (2006). Preparation and Properties of Alloy 2618 Reinforced by Submicron AlN Particles. Journal of Materials Engineering and Performance.DOI
356. Hongming Zhou, Danqing Yi, Zhi‐Ming Yu, Lairong Xiao (2006). Preparation and thermophysical properties of CeO2 doped La2Zr2O7 ceramic for thermal barrier coatings. Journal of Alloys and Compounds.DOI
357. Jian LI, Danqing Yi, Junjie Wen, Hui Zhong, Huiqun Liu (2006). Electric properties stability of NbO anode for new electrolytic capacitor. Transactions of Nonferrous Metals Society of China.DOI
358. Lei Yin, Danqing Yi, Li Yang (2006). Composition and microstructure of modified silicide coating on niobium. Surface Engineering.DOI
359. Lairong Xiao, Cai Zhi-gang, Danqing Yi, Lei YING, Huiqun Liu, Daoyuan Huang (2006). Morphology, structure and formation mechanism of silicide coating by pack cementation process. Transactions of Nonferrous Metals Society of China.DOI
360. Danqing Yi, Wei GU, Xiya Fang, Bin Wang, Wenhai LUO (2006). Plastic deformation behaviors and dynamic recrystallization mechanisms of ZK60 magnesium alloy. International Journal of the Society of Materials Engineering for Resources.DOI
361. YI Dan-qing (2006). Oxidation Behavior of Nb-Ti-Al Alloys at High Temperature. Rare Metals and Cemented Carbides.
362. 杨伏良，易丹青，甘卫平，陈招科（2005）. 挤压温度对高硅铝合金材料组织与性能的影响. 《粉末冶金技术》.
363. 卢斌，易丹青，严彪，殷俊林，刘会群，吴标理，陈小丽（2005）. 高压下Fe84Nb4W3B9纳米晶软磁块体合金的制备. 《稀有金属材料与工程》.
364. 尹登峰，余志明，陶颖，易丹青，王日初（2005）. Zn对2195铝锂合金显微组织和拉伸性能的影响. 《稀有金属材料与工程》.
365. 殷磊，易丹青，肖来荣，杨莉（2005）. 铌表面MoSi2高温涂层的形貌和结构研究. 《稀有金属材料与工程》.
366. 王斌，易丹青，周玲伶，方西亚，罗文海，杨洁（2005）. 稀土元素Y和Nd对Mg-Zn-Zr系合金组织和性能的影响. 《金属热处理》.
367. 袁均平，易丹青，余志明，黄正成，吴伯涛，张霞（2005）. 变形与热处理对Invar合金组织及性能的影响. 《金属热处理》.
368. 刘会群，易丹青，肖来荣，王斌，卢斌，黄道远，杨胜，魏鎏英（2005）. 铸态Ti-Sc二元合金的组织特征、相结构和显微硬度. 《中国有色金属学报》.
369. 卢斌，易丹青，刘岩，刘会群，吴标理，吴炜，马瑞（2005）. Fe73.5Cu1Nb3Si13.5B9机械合金化纳米晶粉末的特种烧结及磁性能. 《中国有色金属学报》.
370. 李荐，易丹青，温俊杰，钟海云（2005）. 新型电解电容器阳极材料低价铌氧化物的制备. 《中国有色金属学报》.
371. 李荐，温俊杰，钟海云，易丹青（2005）. 高能球磨法制备新型电解电容器阳极材料低价铌氧化物工艺研究. 《稀有金属与硬质合金》.
372. 肖来荣，蔡志刚，易丹青，向朝建（2005）. 料浆烧结法制备改性Si-Cr-Ti高温抗氧化涂层的研究. 《稀有金属与硬质合金》.
373. 王斌，方西亚，易丹青，周玲伶，罗文海（2005）. 稀土元素钇和铈对Mg-Zn-Zr系合金组织和性能的影响. 《机械工程材料》.
374. 肖来荣，易丹青，宋成，蔡志刚，许谅亮（2005）. Mo（Si,Al）2粉末材料的机械合金化合成. 《粉末冶金材料科学与工程》.
375. 卢斌，易丹青，刘岩，严彪，殷俊林，刘会群（2005）. Fe86Zr5.5Nb5.5B3非晶合金的超高压烧结成型. 《材料科学与工艺》.
376. 邓姝皓，易丹青，毛俊华，龚竹青，苏玉长（2005）. 镁及镁合金环保型阳极氧化工艺研究. 《电镀与涂饰》.
377. 王斌，易丹青，罗文海，周玲伶，方西亚（2005）. 微量Sc元素对AZ91镁合金组织性能的影响. 《铸造》.
378. 王建华，苏旭平，尹付成，李智，易丹青（2005）. 亚微米AlN增强2618合金基复合材料的制备. 《特种铸造及有色合金》.
379. Hongming Zhou, Danqing Yi, Yi Zhang, Shili Zheng (2005). The dissolution behavior of Nb2O5, Ta2O5 and their mixture in highly concentrated KOH solution. Hydrometallurgy.DOI
380. Jian Li, Danqing Yi, Junjie Wen, Huiqun Liu, Hui Zhong (2005). Invalidation manner and mechanism of new type NbO electrolytic capacitor anode. Journal of Central South University of Technology.DOI
381. Yajie Zheng, Wei-hong Zou, Danqing Yi, Zhu-qing Gong, Xinhai Li (2005). Electroless copper plating process of N, N, N′, N′-tetrakis (2-hydroxypropyl) ethylenediamine system with high plating rate. Journal of Central South University of Technology.DOI
382. Shu-hao Deng, Danqing Yi, Zhu-qing Gong, Yuchang Su (2005). Influence of potential on structure and properties of microarc oxidation coating on Mg alloy. Journal of Central South University of Technology.DOI
383. Hongming Zhou, Shili Zheng, Yi Zhang, Danqing Yi (2005). A kinetic study of the leaching of a low-grade niobium–tantalum ore by concentrated KOH solution. Hydrometallurgy.DOI
384. Sha Liu, Zhiming Yu, Danqing Yi (2005). DIAMOND DEPOSITION ON WC/Co ALLOY WITH A MOLYBDENUM INTERMEDIATE LAYER. Surface Review and Letters.DOI
385. 曹昱，易丹青，殷磊，吴伯涛，刘会群（2004）. Er对Mo5Si3基合金组织与性能的影响. 《稀有金属材料与工程》.
386. 刘会群，易丹青，卢斌，李洪武，殷磊，魏鎏英（2004）. Sc对Ti-Al二元合金组织与显微硬度的影响. 《金属热处理》.
387. 吴标理，卢斌，易丹青，陈小丽，张霞，严彪，殷俊林，陆伟（2004）. Fe 78 Si 9 B 13 非晶合金的超高压成型. 《第五届海峡两岸粉末冶金技术研讨会论文集》.
388. 陈大钦，林锋，肖来荣，蔡和平，蒋显亮，易丹青（2004）. DBC 电子封装基板研究进展. 《材料导报》.
389. 肖来荣，宋成，蔡志刚，易丹青（2004）. Mo（Si,Al） 2 粉末材料的机械合金化合成. 《第五届海峡两岸粉末冶金技术研讨会论文集》.
390. 卢斌，易丹青，严彪，殷俊林，刘会群，吴标理，陈小丽（2004）. MAFe-(Nb,Ti)-B纳米晶粉末热压烧结及磁性能. 《金属功能材料》.
391. 卢斌，易丹青，严彪，殷俊林，刘会群，吴标理，陈小丽，王花宾（2004）. 高压下Fe84Nb7B9纳米晶软磁块体合金的形成. 《中国有色金属学报》.
392. 卢斌，易丹青，刘岩，吴标理，陈小丽，吴炜，马瑞（2004）. Fe 70 Cr 8 Mo 2 Si 5 B 15 非晶合金SPS烧结及磁性能. 《第五届中国功能材料及其应用学术会议论文集Ⅰ》.
393. 黄伯云，易丹青，汪明朴，苏玉长，肖来荣，林高用，宋练鹏，柏振海，余志明，卢雅红，曹显良（2004）. 材料科学与工程人才培养体系的综合改革与实践. 《2004年中国材料研讨会论文摘要集》.
394. 曹昱，易丹青，殷磊，刘黄（2003）. 钼-钴-硅混合粉末的机械合金化研究. 《稀有金属材料与工程》.
395. 杨小玲，刘沙，易丹青，陈刚（2002）. 纳米晶掺Ce硬质合金粉末的制备. 《有色金属材料与工程》.
396. 卢斌，易丹青，刘会群，殷磊，周琳（2002）. MA法制备Fe83Nb7B9Cu1纳米晶粉末及其热稳定性. 《中国有色金属学报》.
397. 刘沙，易丹青，余志明，卢斌，王建华，李泳侠，邹丹（2002）. 金刚石涂层用低钴硬质合金基体表面二步浸蚀法的研究. 《稀有金属材料与工程》.
398. 王建华，易丹青，卢斌，刘沙，曹昱（2002）. 钇对2618合金组织及性能的影响. 《中国稀土学报》.
399. 刘沙，易丹青，余志明（2002）. 高钴硬质合金基体上生长金刚石薄膜组织结构及成分的研究. 《矿冶工程》.
400. 王建华，易丹青，陈康华，卢斌，刘沙，曹昱（2002）. 熔体过热处理对2618铝合金力学性能的影响. 《机械工程材料》.
401. 卢斌，易丹青，刘岩，刘会群，周琳（2002）. MA制备Fe 84 Nb 7 B 9 纳米晶粉末与低温热压成形. 《2002年材料科学与工程新进展（上）——2002年中国材料研讨会论文集》.
402. Sha Liu, YI Dan-qing, Zhiming Yu (2002). Physical Properties of Diamond Coatings on a WC-6%Co Substrate. Chinese Physics Letters.DOI
403. 卢斌，张建安，易丹青，周琳，余志民，刘沙（2001）. Ni70Mn25Co5合金组织对人造金刚石合成的影响. 《矿冶工程》.
404. 王建华，易丹青，曹昱，陈康华，刘红卫，王斌，卢斌，刘沙（2001）. 铁、镍对2618合金挤压前后组织及性能的影响. 《机械工程材料》.
405. 王建华，易丹青，陈康华，卢斌，刘沙（2001）. 熔铸工艺对2618合金中Al9FeNi相形态的影响. 《中国有色金属学报》.
406. 卢斌，易丹青，黎文献，章四琪（2001）. 多层喷射沉积Al-Fe-V-Si合金微观组织演变. 《第四届中国功能材料及其应用学术会议》.
407. 刘沙，易丹青，余志明，卢斌，王建华，李泳侠，邹丹（2001）. 金刚石涂层用硬质合金基体表面预处理研究新进展. 《稀有金属材料与工程》.
408. 卢斌，易丹青，余志明，周琳，张建安（2001）. 金刚石合成过程中的“黄粉”化现象研究. 《第四届中国功能材料及其应用学术会议》.
409. 易丹青，杜若昕，曹昱（2001）. M5Si3型硅化物的研究及相关的物理冶金学问题. 《金属学报》.
410. 曹昱，刘锦文，易丹青，舒金波，许良琼（2001）. 微合金化与形变热处理对铜基弹性合金组织性能的影响. 《矿冶工程》.
411. 刘沙，余志明，易丹青，卢斌，王建华（2001）. 金刚石涂层用高钴硬质合金基体表面二步浸蚀法的研究. 《粉末冶金技术》.
412. 刘沙，易丹青，余志明，李泳侠（2001）. 硬质合金（YG 6 ）基体上生长金刚石簿膜组织结构及成份的研究. 《第四届中国功能材料及其应用学术会议》.
413. 王建华，易丹青（2001）. 获得粒状珠光体可锻铸件的热处理工艺. 《热加工工艺》.
414. 王建华，易丹青，陈康华（2001）. 形变热处理对2618铝合金性能的影响. 《热加工工艺》.
415. 王建华，易丹青，陈康华，刘红卫，王斌（2001）. 熔体过热对高铁镍含量2618合金组织和性能的影响. 《铸造》.
416. 刘沙，易丹青，余志明，卢斌，王斌，李泳侠，邹丹（2000）. 金刚石涂层硬质合金的研究动态(Ⅰ). 《稀有金属与硬质合金》.
417. 王建华，易丹青，陈康华，卢斌，刘沙（2000）. 耐热铝合金研究进展. 《宇航材料工艺》.
418. 卢斌，易丹青，刘沙，梁英，焦方伟，靳丽，郭飞跃（2000）. 超高强度钢TRm80的深冷处理. 《钢铁研究学报》.
419. 周新贵，易丹青，唐仁正（1993）. 用爆炸压实方法制取TiAl/TiB2复合材料初探. 《稀有金属材料与工程》.
420. 易丹青，林炳，黄培云（1992）. 交变磁场对液相烧结的影响. 《粉末冶金技术》.
421. 黎文献，易丹青，陈家应（1992）. 混合稀土对6063合金耐蚀性能的影响. 《中国稀土学报》.
422. 黎文献，易丹青，牟春，林学丰（1992）. 微量稀土对2024合金组织和性能的影响. 《稀有金属材料与工程》.
423. 易丹青，黎文献（1992）. 当代材料科学与工程教育的现状及其发展趋势. 《现代大学教育》.
424. 黎文献，易丹青（1991）. 混合稀土对6063合金阳极氧化膜结构的影响. 《稀有金属材料与工程》.
425. 易丹青，李松瑞（1991）. 准晶体的研究及其进展. 《材料科学与工程学报》.