栗保明

期刊论文

1. 刘健，顾本锋，徐钢，曾弘毅，陈坤，杨春霞，栗保明（2026）. 电磁轨道炮弹道学若干问题的理论与实验研究. 《兵工学报》.
2. 张志轩，杨春霞，栗保明（2025）. 基于AMESim的提拉式弹射及缓冲结构仿真分析. 《计算机仿真》.
3. 栗保明（2025）. 定向能与电磁武器技术. 《国防工业出版社》.
4. Haolei Zhang, Benfeng Gu, Baoming Li, Chunxia Yang (2025). Numerical simulation and experimental study on the characteristics of armature wear and contact process of small caliber railgun. Defence Technology.DOI
5. Zhangfei Wang, Jian Liu, Chunxia Yang, Baoming Li (2025). Study, development and related application of a miniature compact pulsed power supply with high repetition frequency. Defence Technology.
6. Daoping Zhang, Gang Dong, Baoming Li (2025). Morphological evolutions and transverse dynamics of strong transverse wave structure in detonations near critical propagation state. Journal of Fluid Mechanics.DOI
7. Jian Liu, Zhang Wang, Minhao-Zhong, Baoming Li (2023). Study on discharge characteristics of pulsed power module under the condition of discharge short circuit fault. Journal of Physics, Conference Series.DOI
8. Zhangci Wang, Jian Liu, Bo Feng, Baoming Li (2023). Design and test of a compact capacitor-based energy storage pulsed power module with high repetitive discharge frequency. Journal of Physics, Conference Series.DOI
9. Hai-Yuan Li, Baoming Li (2023). Analysis of the strength property of capillary plasma generator. Journal of Physics, Conference Series.DOI
10. Benfeng Gu, Hai-Yuan Li, Baoming Li (2023). An internal ballistic model of electromagnetic railgun based on PFN coupled with multi-physical field and experimental validation. Defence Technology.DOI
11. 宗思佳，杨春霞，栗保明（2022）. 等离子体点火密闭爆发器中压力信号的小波分析. 《火炮发射与控制学报》.
12. 陈一波，栗保明（2022）. 电热化学炮同轴浮动电极式表面放电等离子体的数值模拟. 《火炮发射与控制学报》.
13. 逯麒，陈坤，栗保明（2022）. 电磁发射超高速制导弹药急速滚转稳定性仿真研究. 《火炮发射与控制学报》.
14. 周鹏飞，栗保明（2022）. 两种数值格式对电磁轨道炮速度趋肤效应的计算与分析. 《高电压技术》.
15. Fuqiang Ma, Baoming Li (2022). Heat Dissipation Performance of Coaxial Cable for Electromagnetic Launch. IEEE Transactions on Plasma Science.DOI
16. Xiaofang Kong, Chundong Xu, Xuehui Zhang, Baoming Li (2022). Testing and evaluation of the thermal damage caused by an explosion of energetic materials. International Journal of Thermal Sciences.DOI
17. Jiufu Wei, Baoming Li (2022). Differential-Mode Noise Prediction and Cancellation for High-Power Thyristor Trigger Circuit. IEEE Transactions on Plasma Science.DOI
18. 唐一林，栗保明（2021）. 基于模糊控制的脉冲功率源放电时序控制研究. 《火炮发射与控制学报》.DOI
19. 张辰丰，栗保明（2021）. 一种基于MMC拓扑的高压电容器充电电源设计. 《火炮发射与控制学报》.DOI
20. 张威，李海元，栗保明（2021）. 基于有限元仿真的不同截面轨道炮特性分析. 《计算机仿真》.
21. Bo Tang, Q. Lin, Baoming Li (2021). An optimization method for passive muzzle arc control devices in augmented railguns.DOI
22. Pengfei Zhou, Baoming Li (2021). Numerical Calculation of Magnetic–Thermal Coupling and Optimization Analysis for Velocity Skin Effect. IEEE Transactions on Plasma Science.DOI
23. Jun Wang, Baoming Li (2021). Structural Design Optimization and Prestress Simulation of the Laminate-Containment Launcher. IEEE Transactions on Plasma Science.DOI
24. Jun Wang, Baoming Li (2021). Numerical Simulation of Laminate-Containment Launcher Based on the Electromagnetic–Mechanical Coupled Model. IEEE Transactions on Plasma Science.DOI
25. Shuangpeng Hao, Baoming Li (2021). Calculating the magnetic force of solenoid inductor wound by rectangular cross‐section wire. IET Electric Power Applications.DOI
26. Fuqiang Ma, Baoming Li (2021). Thermal Analysis of the Pulse Inductor for Electromagnetic Launch Under Continuous Discharge Condition. IEEE Access.DOI
27. 朱春燕，王军，马富强，倪琰杰，唐波，栗保明（2020）. 基于炮尾电压的串联增强型电磁轨道炮滑动电接触特性分析. 《兵工学报》.
28. 高源，王昭昕，肖宏成，倪琰杰，徐英桃，栗保明（2020）. 回流效应下电磁轨道炮膛口电弧运动的数值分析. 《力学与实践》.
29. 李贞晓，郝双鹏，马富强，栗保明（2020）. 电炮用脉冲电源模块技术现状与发展. 《兵工学报》.
30. 王章飞，栗保明（2020）. 电磁炮热管理中导轨和电源的液冷研究进展. 《火炮发射与控制学报》.DOI
31. 黄飞，田慧，栗保明（2020）. 基于电磁发射的脉冲电源实验数据管理平台设计. 《兵器装备工程学报》.
32. 林庆华，栗保明（2020）. 基于瞬态多物理场求解器的电磁轨道炮发射过程建模与仿真. 《兵工学报》.
33. 李贞晓，郝双鹏，马富强，田慧，栗保明（2020）. 电热化学发射用紧凑型脉冲电源模块. 《高电压技术》.DOI
34. 杨春霞，金涌，刘健，倪琰杰，栗保明（2020）. 铜柱测压器在电热化学发射试验中的应用研究. 《工程与试验》.
35. Yong Jin, Yan-Jie Ni, Liang Zhao, Nian-Kai Cheng, G. Wan, Baoming Li (2020). Firing range optimization of a 155mm uni-modular charge howitzer by ETC technology. Journal of Physics, Conference Series.DOI
36. Zhenxiao Li, Shuangpeng Hao, Fuqiang Ma, Baoming Li (2020). Analysis on the Influence of Breech Voltage on the Pulsed Discharge Characteristics of Capacitive Pulsed Power Supply in EML. Journal of Physics, Conference Series.DOI
37. Shuangpeng Hao, Zhenxiao Li, Fuqiang Ma, Baoming Li (2020). Characteristic analysis of inductor in pulsed power supply changing with shape ratio. Journal of Physics, Conference Series.DOI
38. Chun-Xia Yang, G. Wan, Jian Liu, Wenxuan Zhang, Hui Tian, Zhenxiao Li, Yong Jin, Baoming Li (2020). A Non-Lethal Electric Shock Generator with Wireless Control Function. Journal of Physics, Conference Series.DOI
39. Zhao-Xin Wang, Jiang Yue, Jing Han, Yong Jin, Baoming Li (2020). Regional fuzzy binocular stereo matching algorithm based on global correlation coding for 3D measurement of rail surface.DOI
40. Q. Lin, Baoming Li (2020). Numerical simulation of dynamic large deformation and fracture damage for solid armature in electromagnetic railgun.DOI
41. Fuqiang Ma, Xiang-Rong Liu, Shuangpeng Hao, Zhenxiao Li, Baoming Li (2020). Simulation analysis of thermal management of inductor applied to pfn under continuous discharge condition. Journal of Physics, Conference Series.DOI
42. Chun-Xia Yang, Yong Jin, Hai-Yuan Li, Yong Yang, Yan-Jie Ni, Zhenxiao Li, Baoming Li (2020). Experimental Study on Plasma Ignited Single-base Propellant using SEM and EDS. Journal of Physics, Conference Series.DOI
43. Jiu-Fu Wei, Xiang-Rong Liu, Luo, Zhenxiao Li, Baoming Li (2020). Study on differential mode conducted interference of trigger circuit of high-power thyristors in pulsed power supply. Journal of Physics, Conference Series.DOI
44. Chunyan Zhu, Baoming Li (2020). Analysis of sliding electric contact characteristics in augmented railgun based on the combination of contact resistance and sliding friction coefficient. Defence Technology.DOI
45. Yan-Jie Ni, Yong Jin, G. Wan, Chun-Xia Yang, Baoming Li (2020). Study on the solid propellant burning rate enhanced by plasma in the closed bomb. Journal of Physics: Conference Series.DOI
46. Zhao-Xin Wang, Baoming Li (2020). A High Reliability 3D Scanning Measurement of the Complex Shape Rail Surface of the Electromagnetic Launcher. Italian National Conference on Sensors.DOI
47. Xiang-Rong Liu, Fuqiang Ma, Jiu-Fu Wei, Baoming Li (2020). Analysis and optimization of the two-dimensional model of the armature rotation on the electromagnetic railgun. Journal of Physics, Conference Series.DOI
48. Jiu-Fu Wei, Zhenxiao Li, Baoming Li (2020). Investigation of Reverse Recovery Current of High-Power Thyristor in Pulsed Power Supply.DOI
49. Xiang-Rong Liu, Fuqiang Ma, Jiu-Fu Wei, Shuangpeng Hao, Yan-Jie Ni, Baoming Li (2020). Optimization of the Current Control for the Pulsed Power Cables of the Electromagnetic Railgun. IEEE Transactions on Plasma Science.DOI
50. Dong-Mei Yin, Baoming Li, Hong-Cheng Xiao (2020). Analysis for the residual prestress of composite barrel for railgun with tension winding.DOI
51. Jun Wang, Baoming Li (2020). Dynamic Response and Critical Velocity of Rails in Electromagnetic Rail Launcher Due to Axial Force. IEEE Transactions on Plasma Science.DOI
52. Dongmei Yin, Baoming Li, Hongcheng Xiao (2020). Prediction of three-dimensional elastic behavior of filament-wound composites based on the bridging model. Defence Technology.DOI
53. 王雪军，顾金良，罗红娥，田慧，栗保明（2019）. 电磁轨道炮内弹道接触电阻分析. 《南京理工大学学报》.DOI
54. 高硕飞，李海元，栗保明（2019）. 圆膛多轨电磁炮身管的多场耦合有限元仿真. 《兵器装备工程学报》.
55. 吴金国，林庆华，栗保明（2019）. 电磁轨道发射装置导轨动力学响应分析. 《振动工程学报》.DOI
56. 胡明媛，董刚，陈耀慧，栗保明（2019）. 斜激波与反应性气体界面作用的数值模拟. 《弹道学报》.
57. 王雪军，顾金良，罗红娥，夏言，栗保明（2019）. 低频低阻抗精确测量系统. 《电子测量技术》.DOI
58. 陈光，顾金良，刘庆国，罗红娥，夏言，栗保明（2019）. FlexRay总线在脉冲源控制系统设计中的应用. 《国外电子测量技术》.DOI
59. Zhenxiao Li, Shu-rui Hao, Fuqiang Ma, Jin Yong, Baoming Li (2019). Test and Analysis on Fault of Thyristor in a Pulsed Power Supply for EML.DOI
60. Shuangpeng Hao, Zhenxiao Li, Fuqiang Ma, Xiang-Rong Liu, Xiang-Shu Zhang, Baoming Li (2019). Calculation of Axial Magnetic Force of Solenoid Inductor Made of Coil with Rectangular Cross-Section.DOI
61. Yan-Jie Ni, Yong Jin, G. Wan, Baoming Li (2019). Numerical simulation on the pressure wave in a 30 mm electrothermal-chemical gun with the discharge rod plasma generator. Defence Technology.DOI
62. Yong Jin, Zhenxiao Li, Yan-Jie Ni, Xiaoya Gao, Wang Gang, Chun-Xia Yang, Baoming Li (2019). Design and Manufacture of a 100kA Coaxial Pulsed Power Cable for Plasma Generator and PPS in ETC Guns. 31st International Symposium on Ballistics.DOI
63. Yong Jin, Zhenxiao Li, Yan-Jie Ni, Xiaoya Gao, G. Wan, Chun-Xia Yang, Baoming Li (2019). Design and manufacture of a 100 kA coaxial pulsed power cable for plasma generator and PPS in ETC guns. Defence Technology.DOI
64. Baoming Li, Q. Lin, C. Woodley (2019). Recent Update on the Multi-Physical Model of Electromagnetic Railgun.DOI
65. G. Wan, Q. Lin, Yong Jin, Chun-Xia Yang, Yan Zhang, Baoming Li (2019). Multiform Damages on the Rail of an Electromagnetic Rail Launcher.DOI
66. Fei-Peng Huang, Hui Tian, Baoming Li (2019). Data Management and Simulation of Pulse Power Supply Experiment.DOI
67. Hui Tian, Jin-Liang Gu, Yong Jin, Yan Xia, Wang Gang, Baoming Li (2019). Application of Flash X-Ray Radiography System in Muzzle Image Diagnosis of Railgun. 31st International Symposium on Ballistics.DOI
68. Dong-Mei Yin, Baoming Li, Hong-Cheng Xiao (2019). Simulation of the Winding Angles’ Influence on the Dynamic Strength and Stiffness of Filament Wound Composite Barrel for Railgun. IEEE Transactions on Plasma Science.DOI
69. Fuqiang Ma, Zhenxiao Li, Xiang-Rong Liu, Shuangpeng Hao, Xin Li, Baoming Li (2019). Thermal-Flow Coupling Simulation Analysis of Spiral Channel Water Cooled Radiator for High Power Thyristor.DOI
70. Yan-Jie Ni, Yong Jin, Wang Gang, Baoming Li (2019). Numerical Simulation on the Pressure Wave in a 30MM Electrothermal-Chemical Gun with the Discharge Rod Plasma Generator. 31st International Symposium on Ballistics.DOI
71. Yingtao Xu, Bo Tang, Baoming Li (2019). Research on momentum transfer in simple railgun. Defence Technology.DOI
72. Hongcheng Xiao, Dongmei Yin, Baoming Li (2019). Electrodynamic response study on railgun launcher based on electromechanical coupling model. Defence Technology.DOI
73. 李贞晓，金涌，杨栋，弯港，栗保明（2018）. 一种同轴型脉冲功率电缆的设计与试制. 《兵工学报》.
74. 倪琰杰，杨栋，金涌，弯港，杨春霞，栗保明（2018）. 中心杆式等离子体发生器瞬态时变模型分析. 《火炮发射与控制学报》.
75. 肖宏成，尹冬梅，林庆华，栗保明（2018）. 轨道炮复合身管纤维缠绕封装结构优化设计及预应力模拟. 《高压物理学报》.
76. 马秋生，李海元，管军，栗保明（2018）. 电热化学炮等离子体增强作用数值模拟. 《兵器装备工程学报》.
77. 吴锦涛，董刚，栗保明（2018）. 基于多线程并行的动态自适应建表加速算法在气相爆轰模拟中的应用. 《兵工学报》.
78. C. Woodley, Chang-Ge Feng, Baoming Li (2018). 1st International Conference on Defence Technology, Beijing, China, 21–25 October 2018. Defence Technology.DOI
79. Baoming Li, Q. Lin (2018). Analysis and discussion on launching mechanism and tactical electromagnetic railgun technology. Defence Technology.DOI
80. Xiao Chen, G. Dong, Baoming Li (2018). Numerical study of three-dimensional developments of premixed flame induced by multiple shock waves. Acta Mechanica Sinica.DOI
81. Jin-Tao Wu, G. Dong, Baoming Li (2018). Performance of Parallel Chemistry Acceleration Algorithm in Simulations of Gaseous Detonation: Effects of Fuel Type and Numerical Scheme Resolution. Combustion Science and Technology.DOI
82. Jin-Tao Wu, G. Dong, Baoming Li (2018). Parallel chemistry acceleration algorithms based on ISAT method in gaseous detonation computations.DOI
83. Dongmei Yin, Hongcheng Xiao, Baoming Li (2018). Dynamics Response of Filament-Wound Composite Barrel for Rail Gun With Acceleration Load. IEEE Transactions on Plasma Science.DOI
84. 吴金国，李海元，程年凯，李龙，栗保明（2017）. 电磁轨道炮电枢馈电位置研究. 《兵工学报》.
85. 尹冬梅，肖宏成，栗保明（2017）. 基于三维梁理论的电磁轨道炮复合身管抗弯性能分析. 《兵工学报》.
86. 张亚舟，李贞晓，程年恺，田慧，栗保明（2017）. 一种真空触发开关脉冲电源系统研究. 《兵工学报》.
87. 吴金国，林庆华，弯港，金涌，李海元，栗保明（2017）. 基于物质点法的轨道炮刨削机理三维数值研究. 《爆炸与冲击》.
88. 林庆华，栗保明（2017）. 电磁轨道炮瞬态温度场的数值模拟. 《工程热物理学报》.
89. 尹冬梅，栗保明（2017）. 基于三维等效弹性模量的轨道炮复合身管抗弯刚度分析. 《兵器材料科学与工程》.
90. 张亚舟，李贞晓，田慧，李海元，栗保明（2017）. 基于反向开关晶体管的脉冲电源在电磁发射中的应用. 《兵工学报》.
91. 田慧，金涌，李龙，弯港，李贞晓，栗保明（2017）. 等离子体发生器与含能工质相互作用的检测系统设计. 《第十八届全国等离子体科学技术会议》.
92. Baoming Li, Long Li, Hai-Yuan Li, Yao-Hui Chen, Bo Tang, Hong-Zhi Li (2017). A Novel Electromagnetic Launching Assisted Bore Ram Accelerator and its Potential Applications.DOI
93. Hong-Cheng Xiao, Dong-Mei Yin, Hai-Yuan Li, Baoming Li (2017). Thermoelastic Analysis of Composite Railgun Housing Under Rapid Fire.DOI
94. Hui Tian, Yong Jin, Long Li, G. Wan, Zhenxiao Li, Baoming Li (2017). Research Progress of Pressure Testing Technology for Electrothermal-Chemical Launch.DOI
95. Yong Jin, G. Wan, Chun-Xia Yang, Hai-Yuan Li, Nian-Kai Cheng, Baoming Li (2017). Applied Analysis of Electrothermal Chemical Launch Technology in 155mm Modular Charge Howitzer.DOI
96. Zhao-Xin Wang, Jiang Yue, Jing Han, Long Li, Yong Jin, Yuan Gao, Baoming Li (2017). High-SNR spectrum measurement based on Hadamard encoding and sparse reconstruction.DOI
97. Zhenxiao Li, Yazhou Zhang, Jinguo Wu, Yong Jin, Hui Tian, Baoming Li (2017). Design of a 30MJ capacitor-based pulsed power supply for eml. 2017 IEEE 21st International Conference on Pulsed Power (PPC).DOI
98. Yuan Gao, Jiang Yue, Baoming Li (2017). Research on the 3D Reconstruction for Railgun Bore Scanning Based on Combined Binocular Vision and Laser Marking.DOI
99. Zhao-Xin Wang, Jiang Yue, Yong Jin, Baoming Li (2017). Research on the Damage Diagnosis for Rails with a New 3D Scanning Method.DOI
100. Yan-Jie Ni, Yong Jin, Nian-Kai Cheng, Chun-Xia Yang, Hai-Yuan Li, Baoming Li (2017). Simulation of two-dimensional interior ballistics model of solid propellant electrothermal-chemical launch with discharge rod plasma generator.DOI
101. Hongcheng Xiao, Dongmei Yin, Baoming Li (2017). Research on Elastic Design About Filament Wound Barrel of Railgun. IEEE Transactions on Plasma Science.DOI
102. Bo Tang, Yingtao Xu, Qinghua Lin, Baoming Li (2017). Synergy of Melt-Wave and Electromagnetic Force on the Transition Mechanism in Electromagnetic Launch. IEEE Transactions on Plasma Science.DOI
103. Jinguo Wu, Gang Wan, Niankai Cheng, Long Li, Baoming Li (2017). Research on Armature’s Wearing and Dynamic Interior Ballistic of A Railgun. IEEE Transactions on Plasma Science.DOI
104. 石江波，栗保明（2016）. 串联增强型电磁轨道炮螺栓预紧封装性能分析. 《火炮发射与控制学报》.
105. 林庆华，栗保明（2016）. 电磁轨道炮瞬态磁场测量与数值模拟. 《兵工学报》.
106. 倪琰杰，程年恺，金涌，杨春霞，李海元，栗保明（2016）. 30mm电热化学炮膛内压力波数值模拟研究. 《兵工学报》.
107. 张亚舟，李贞晓，金涌，罗红娥，田慧，栗保明（2016）. 电磁发射用13 MJ脉冲功率电源系统研究. 《兵工学报》.
108. 倪琰杰，邢荣军，弯港，金涌，李海元，杨春霞，栗保明（2016）. 多孔发射药等离子体增强燃速. 《爆炸与冲击》.
109. 李贞晓，张亚舟，倪琰杰，栗保明（2016）. 晶闸管关断特性在增强型轨道发射系统中的影响分析. 《兵工学报》.
110. 唐波，徐英桃，栗保明（2016）. 电磁轨道炮被动式炮口消弧装置的理论分析与优化设计. 《弹道学报》.
111. 尹冬梅，栗保明（2016）. 考虑缠绕预应力的轨道炮身管复合外壳渐进损伤分析. 《兵工学报》.
112. G. Wan, Yong Jin, Hai-Yuan Li, Baoming Li (2016). Study on Free Surface and Channel Flow Induced by Low-Temperature Plasma via Lattice Boltzmann Method.DOI
113. Jinguo Wu, Bo Tang, Q. Lin, Hai-Yuan Li, Baoming Li (2016). 3D numerical simulation and analysis of railgun gouging mechanism.DOI
114. Zhenxiao Li, Ya-Zhou Zhang, Yan-Jie Ni, Baoming Li（2016）. 強化された軌道発射システムにおけるサイリスタターンオフ特性の影響を解析した。【JST・京大機械翻訳】.
115. Q. Lin, Baoming Li (2016). Numerical Simulation of Interior Ballistic Process of Railgun Based on the Multi-field Coupled Model.DOI
116. Yan-Jie Ni, Yong Jin, G. Wan, Chun-Xia Yang, Hai-Yuan Li, Baoming Li (2016). Application of transient burning rate model of solid propellant in electrothermal-chemical launch simulation.DOI
117. Q. Lin, Baoming Li（2016）. 電磁軌道における電磁場測定と数値シミュレーション【JST・京大機械翻訳】.
118. Yan-Jie Ni, Rong-Jun Xing, G. Wan, Yong Jin, Hai-Yuan Li, Chun-Xia Yang, Baoming Li（2016）. 多孔性発射薬のプラズマ増強燃焼速度【JST・京大機械翻訳】.
119. Hua Jiang, G. Dong, Xiao Chen, Baoming Li (2016). A parameterization of the Richtmyer–Meshkov instability on a premixed flame interface induced by the successive passages of shock waves.DOI
120. Ming-Yue Gui, Bao-chun Fan, Baoming Li (2016). Detonation diffraction in combustible high-speed flows.DOI
121. Dong-Mei Yin, Baoming Li（2016）. 絡みプレストレスを考慮した軌道/複合複合シェルの漸近損傷解析【JST・京大機械翻訳】.
122. Baoming Li, Hong-Zhi Li (2016). Some Features and Applications of Ballistic Science and Technology in China.
123. Yu-tao Lou, Hai-Yuan Li, Baoming Li (2016). Research on Proximity Effect of Electromagnetic Railgun.DOI
124. Yong Jin, Yan-Jie Ni, Hai-Yuan Li, Baoming Li (2016). Mechanism of plasma ignition in electrothermal-chemical launcher.DOI
125. Yan-Jie Ni, Nian-Kai Cheng, Yong Jin, Chun-Xia Yang, Hai-Yuan Li, Baoming Li（2016）. 30MMの電熱化学的銃口の数値シミュレーション研究【JST・京大機械翻訳】.
126. Yan-Jie Ni, Nian-Kai Cheng, Yong Jin, Chun-Xia Yang, Hai-Yuan Li, Baoming Li (2016). Numerical Simulation on Pressure Wave in a 30 mm Electrothermal-chemical Gun.
127. 陈耀慧，栗保明，刘怡昕（2015）. 流向脉动电磁力控制效率数值研究. 《中国力学大会-2015论文摘要集》.
128. 石江波，袁志瀚，张俊萍，布仁额，栗保明（2015）. 电磁轨道炮身管封装性能研究. 《火炮发射与控制学报》.
129. 杨春霞，金涌，李海元，李贞晓，栗保明（2015）. 密闭爆发器等离子体点火一致性实验研究. 《弹道学报》.
130. 高梁，李贞晓，栗保明（2015）. 直线感应加速器的优化设计与仿真. 《火炮发射与控制学报》.
131. 李贞晓，张亚舟，高梁，金涌，栗保明（2015）. 电热化学发射中硅堆故障试验分析. 《兵工学报》.
132. 石江波，栗保明（2015）. 电磁轨道炮后坐过程研究. 《兵工学报》.
133. 陈耀慧，栗保明，潘绪超，刘怡昕（2015）. 电磁力控制翼型绕流分离的增升减阻效率研究. 《力学学报》.
134. 楼宇涛，栗保明（2015）. 管身对中口径电磁轨道炮的影响分析. 《强激光与粒子束》.
135. Liang Gao, Zhenxiao Li, Baoming Li (2015). The Modeling and Calculation on an Air-Core Passive Compulsator. IEEE Transactions on Plasma Science.DOI
136. Zhenxiao Li, Yazhou Zhang, Jinguo Wu, Yong Jin, Baoming Li (2015). Development and properties of a 500KJ pulsed power supply. IEEE International Pulsed Power Conference.DOI
137. Yazhou Zhang, Jinguo Wu, Zhenxiao Li, Yong Jin, Hui Tian, Wang-Sheng Li, Baoming Li (2015). Design of compact high-voltage capacitor charging power supply for pulsed power application. IEEE International Pulsed Power Conference.DOI
138. 陈耀慧，张辉，陈志华，栗保明（2014）. 翼型绕流的洛仑兹力控制研究. 《第八届全国流体力学学术会议论文摘要集》.
139. 高梁，李贞晓，栗保明（2014）. 基于FPGA的高功率脉冲电源控制系统设计. 《火炮发射与控制学报》.
140. 金涌，栗保明（2014）. 铜丝电爆炸的光谱分析. 《爆炸与冲击》.
141. Yong Jin, Baoming Li (2014). Calculation of Plasma Radiation in Electrothermal-Chemical Launcher.DOI
142. Huan-Hao Zhang, Zhi-Hua Chen, Baoming Li, Xiao-Hai Jiang (2014). The secondary vortex rings of a supersonic underexpanded circular jet with low pressure ratio.DOI
143. Hui Zhang, Bao-chun Fan, Zhi-Hua Chen, Hong-Zhi Li, Baoming Li (2014). An in-depth study on vortex-induced vibration of a circular cylinder with shear flow.DOI
144. Yong Jin, Yazhou Zhang, Hui Tian, Chun-Xia Yang, Q. Lin, Baoming Li (2014). Measurement of electromagnetic radiation dissipation in pulse power supply discharging. International Symposium on Electromagnetic Launch Technology.DOI
145. 尹冬梅，栗保明（2013）. 基于接触算法的电磁轨道发射装置的磁场-结构耦合数值分析. 《高压物理学报》.
146. 张祎，李海元，杨春霞，栗保明（2013）. 固体电枢电磁轨道炮发射一致性研究. 《火炮发射与控制学报》.
147. 张祎，杨春霞，李贞晓，栗保明（2013）. 基于非等间隔GM(1,1)模型的固体电枢初速预测. 《弹道学报》.
148. 金涌，栗保明（2013）. 电热等离子体辐射点火模拟. 《第十六届全国等离子体科学技术会议暨第一届全国等离子体医学研讨会会议摘要集》.
149. 弯港，倪琰杰，杨春霞，栗保明（2013）. 基于低温等离子体的流动控制数值仿真研究. 《计算机仿真》.
150. Hui Zhang, Bao-chun Fan, Zhi-Hua Chen, Hong-Zhi Li, Baoming Li (2013). Experimental Research on The Mechanism of Lift Amplification and Vibration Suppression of Lorentz Force.DOI
151. Baoming Li (2013). Prediction of Armature Muzzle Velocity Based on Non-equidistant GM(1,1)Model. Journal of Ballistics.
152. 杨春霞，李贞晓，李海元，杨勇，栗保明（2012）. 双基药等离子体点火的物理化学效应分析. 《弹道学报》.
153. 张祎，李贞晓，杨春霞，栗保明（2012）. 基于MGM(1,N)模型的C型固体电枢初速研究. 《火炮发射与控制学报》.
154. 张祎，杨春霞，栗保明（2012）. 电磁轨道炮C型固体电枢坡膛段的装填方式研究. 《高压物理学报》.
155. 张祎，杨春霞，杨栋，栗保明（2012）. 基于灰色模型的电磁轨道发射实验电枢初速分析. 《南京理工大学学报》.
156. 杨春霞，杨勇，李海元，李贞晓，栗保明（2012）. 一种三基药的等离子体点火实验研究. 《火炸药学报》.
157. Yi Zhang, Chun-Xia Yang, Hai-Yuan Li, Baoming Li (2012). The Research on the Launching Consistence of Small Caliber Electromagnetic Railgun.DOI
158. G. Wan, Hai-Yuan Li, Chun-Xia Yang, Baoming Li (2012). Induced Flow Simulation by Means of Low-Temperature Plasma via a Multi-Components Boltzmann Method.DOI
159. Yong Jin, Baoming Li (2012). Energy skin effect of propellant particles in Electrothermal-Chemical Launcher. International Symposium on Electromagnetic Launch Technology.DOI
160. Baoming Li (2012). Experimental Study on a Triple-base Propellant Ignited by Plasma. Chinese Journal of Explosives and Propellants.
161. Jin Liang Gu, Hong E Luo, Ke Jie Qiang, Baoming Li (2012). Application of Differential Interference in Electromagnetic Rail Gun Strain Measurement. Applied Mechanics and Materials.DOI
162. Jin Liang Gu, Hong E Luo, Lei Dou, Na Shen, Yan Xia, Huei Tie, Zhen Xiao Li, Baoming Li (2012). The Research of The Pulse Power Source Sequential Control System. Applied Mechanics and Materials.DOI
163. Baoming Li (2012). Research on Muzzle Velocity of C-Type Solid Armature Based on MGM(1,N) Model. Journal of Gun Launch & Control.
164. 张祎，杨春霞，李贞晓，栗保明（2011）. 电磁轨道炮C型固体电枢组合装填方式下接触特性的分析. 《火炮发射与控制学报》.
165. 张祎，杨春霞，栗保明（2011）. 基于灰熵分析法的电枢出口速度影响因素分析. 《弹道学报》.
166. 秦鹏高，白桥栋，翁春生，栗保明（2011）. 供气含氧量对脉冲爆轰发动机性能影响的实验研究. 《弹道学报》.
167. 罗红娥，顾金良，陈平，夏言，栗保明（2011）. 三次序列闪光阴影照相系统研究. 《半导体光电》.
168. 金涌，李贞晓，张湘澍，栗保明（2011）. 复杂电磁系统的电磁防护设计原则. 《工程与试验》.
169. Huan-Hao Zhang, Zhi-Hua Chen, Xiao-Hui Sun, Xiao-Hai Jiang, Baoming Li (2011). Numerical Investigations on the Thrust Augmentation Mechanisms of Ejectors Driven by Pulse Detonation Engines.DOI
170. B. Fridman, Baoming Li, V. Belyakov, R. Enikeev, N. Kovrizhnykh, Yu Kryukov, A. Roshal, R. Serebrov (2011). 1 MJ pulsed current source. 2011 IEEE Pulsed Power Conference.DOI
171. Baoming Li (2011). Experimental Study on Effect of Oxygen Content in Gas on the Performance of Pulsed Detonation Engine.
172. B. Fridman, Baoming Li, V. Belyakov, R. Enikeev, N. Kovrizhnykh, Yu Kryukov, A. Roshal, R. Serebrov (2011). A 1-MJ capacitive energy storage.DOI
173. Hai-Yuan Li, Da-Wen Xue, Zhi-Hua Chen, Baoming Li (2011). Influences of the Height of Two Wall-Mounted Rectangle Cylinders on their Flow Patterns and Drag Coefficients.DOI
174. Jin Liang Gu, Hong E Luo, Jian Xin Li, Yan Xia, Baoming Li (2011). Applications of Bragg Grating in Strain Measurement of Electromagnetic Railgun. Advanced materials research.DOI
175. Honge Luo, Jinliang Gu, Xia Chen, Baoming Li (2011). A muzzle velocity measurement method based on shadow photograph system with three laser pulses' illumination.DOI
176. Hong E Luo, Jin Liang Gu, Pïng Chen, Yan Xia, Baoming Li (2011). An Accurate Exposure Time Measurement Method of CCD Cameras. Advanced materials research.DOI
177. Baoming Li (2011). Research on Shadow Photograph System with Three-sequence Laser Sparking. Bandaoti guangdian.
178. Baoming Li (2011). Analysis About Contact Characteristics of C Type Solid-Armature in Electromagnetic Railgun During Combined Engraving Process. Journal of Gun Launch & Control.
179. 林庆华，栗保明（2010）. 有限元/边界元耦合法计算电磁轨道炮三维瞬态涡流场. 《南京理工大学学报》.
180. 秦鹏高，陈志华，栗保明（2010）. 超声速立方体绕流数值模拟. 《南京理工大学学报》.
181. 李贞晓，张祎，杨春霞，栗保明（2010）. 电热化学发射中输电结构绝缘性能影响因素. 《南京理工大学学报》.
182. 秦鹏高，李宁，翁春生，栗保明（2010）. 无阀式汽油/空气两相脉冲爆轰发动机试验研究. 《弹道学报》.
183. 傅鑫，张文宣，栗保明（2010）. 低温等离子体减阻实验研究. 《弹道学报》.
184. 秦鹏高，朱利刚，陈志华，栗保明（2010）. 双柱体绕流中高度变化对其阻力的影响. 《计算力学学报》.
185. 李贞晓，杨春霞，栗保明（2010）. 高功率脉冲电源中晶闸管应用的研究. 《电力电子技术》.
186. 金涌，杨春霞，李海元，栗保明（2010）. 电磁发射中初速测量的初步分析. 《工程与试验》.
187. Penggao Qin, Zhi-Hua Chen, Xiao-Hui Sun, Baoming Li (2010). The influences of MHD control direction on the hypersonic inlet flow.DOI
188. Baoming Li (2010). Influencing Factors of Insulating Characteristics of Electric Transmission Structure for Electrothermal Chemical Launch. Journal of Nanjing University of Science and Technology.
189. Baoming Li (2010). Finite-element/Boundary-element Coupling Method for 3D Transient Eddy Current Field Calculation in Electromagnetic Railgun. Journal of Nanjing University of Science and Technology.
190. Honge Luo, Jinliang Gu, Pïng Chen, Yan Xia, Jianguo Guo, Baoming Li (2010). Velocity measurement based on orthogonal CCD shadow photograph system in Ballistic range. 《中国邮电高校学报：英文版》.DOI
191. Baoming Li (2010). Experimental Investigation on Drag Force Reduction by Low-Temperature Plasma. Journal of Ballistics.
192. Baoming Li (2010). Research on the Application of Thyristor in the Pulsed Power Supply. IEEE Transactions on Power Electronics.
193. Baoming Li (2010). Experimental Study on Gasline/Air Two-phase Valveless Pulse Detonation Engine. Journal of Ballistics.
194. Baoming Li (2010). Numerical Simulation of Supersonic Flow Past Cube. Journal of Nanjing University of Science and Technology.
195. 顾金良，陈平，夏言，罗红娥，郭建国，栗保明（2009）. 数字式靶道阴影照相系统. 《弹道学报》.
196. 祁丽昉，林庆华，关磊，栗保明，李鸿志（2009）. 消融控制电弧等离子体电导率模型的初步研究. 《弹道学报》.
197. 林庆华，栗保明（2009）. 电磁轨道炮三维瞬态涡流场的有限元建模与仿真. 《兵工学报》.
198. 罗红娥，陈平，顾金良，夏言，栗保明（2009）. 二次序列闪光高速照相系统研究. 《光学技术》.
199. 罗红娥，陈平，顾金良，夏言，栗保明（2009）. 线阵CCD测量系统的镜头畸变校正新方法. 《半导体光电》.
200. 罗红娥，陈平，顾金良，夏言，栗保明（2009）. 线阵CCD立靶系统全视场测量误差分析. 《光学技术》.
201. 李贞晓，栗保明，林庆华（2009）. 脉冲电源中高压硅堆保护的研究. 《电力电子技术》.
202. G. Dong, Bao-chun Fan, Ming-Yue Gui, Baoming Li (2009). Numerical simulations of interactions between a flame bubble with an incident shock wave and its focusing wave.DOI
203. Baoming Li (2009). Finite Element Analysis of 3D Transient Eddy Field in Electromagnetic Railgun. Acta Armamentarii.
204. Baoming Li (2009). Error analysis on the linear CCD crossing measurement system. Optical Technique.
205. Baoming Li (2009). Digital Ballistic Range Shadowgraph System. Journal of Ballistics.
206. Baoming Li (2009). A New Method of Lens Distortion Calibration of Linear CCD Measurement System. Bandaoti guangdian.
207. Baoming Li (2009). The research on the fast photograph system with two sequence laser sparking. Optical Technique.
208. 林庆华，栗保明（2008）. 高装填密度钝感发射装药的内弹道遗传算法优化. 《弹道学报》.
209. 傅鑫，王悦，栗保明（2008）. 大气压下低温表面等离子体发射光谱实验研究. 《南京理工大学学报》.
210. 林庆华，栗保明（2008）. 电热化学炮内弹道过程的势平衡分析. 《兵工学报》.
211. 林庆华，栗保明（2008）. 电容储能高功率脉冲成形网络浪涌过程分析. 《南京理工大学学报》.
212. 傅鑫，张文宣，栗保明（2008）. 低温等离子体诱导的速度边界层的实验研究. 《弹道学报》.
213. 李贞晓，栗保明，林庆华（2008）. 电容基强流脉冲电源续流电路的应用研究. 《电气应用》.
214. 田慧，栗保明（2008）. 用于弹道研究的脉冲X射线诊断系统. 《工程与试验》.
215. 李贞晓，栗保明，杨春霞（2008）. 电容型高功率脉冲电源控制电路设计. 《工程与试验》.
216. Baoming Li (2008). Potential Equilibrium Analysis of Interior Ballistic Processes in Electro-thermal Chemical Gun. Acta Armamentarii.
217. Baoming Li (2008). Experiment of Emission Spectrum of Low-temperature Surface Discharge Plasma in Atmospheric Pressure.
218. Baoming Li (2008). Genetic Algorithm Optimization of Interior Ballistic Design Using High Load Density Propellant. Journal of Ballistics.
219. Baoming Li (2008). Experimental Study of Boundary Layer Velocity Profile Induced by Low-temperature Plasma. Journal of Ballistics.
220. Baoming Li (2008). Analysis on Surge Process Generated in High Power Pulse Forming Network with Capacitor Energy Storage System. Journal of Nanjing University of Science and Technology.
221. 杨春霞，栗保明（2007）. 包覆药等离子体点火及燃烧性能的实验研究. 《弹道学报》.
222. 李海元，栗保明，李鸿志（2007）. 等离子体点火条件下火药燃速的实验研究. 《弹道学报》.
223. 李海元，栗保明，李鸿志（2007）. 等离子体增强火炮发射性能的实验研究. 《弹箭与制导学报》.
224. 林庆华，栗保明（2007）. 密闭爆发器压力信号的时频分析与特征提取. 《火工品》.
225. Xin Fu, Baoming Li, Junfeng Zhang, Fuzhi Tian, Daniel Y. Kwok (2007). ELECTROKINETIC SLIP FLOW OF MICROFLUIDICS IN TERMS OF STREAMING POTENTIAL BY A LATTICE BOLTZMANN METHOD: A BOTTOM-UP APPROACH. International Journal of Modern Physics C.DOI
226. Xu Fu, Baoming Li, Junfeng Zhang, Fuzhi Tian, Daniel Y. Kwok (2007). A Mean-Field Lattice Boltzmann Model for Electrokinetic Slip Flow. ASME International Conference on Nanochannels, Microchannels, and Minichannels (ICNMM).DOI
227. Baoming Li (2007). An Experiment Study on Ignition and Combustion Behavior of Coated Propellant Ignited by Plasma. Journal of Ballistics.
228. 林庆华，杨春霞，李海元，栗保明（2006）. 火药床内电弧辐射能量分布的数值研究. 《弹道学报》.
229. 田慧，林庆华，栗保明（2006）. 压电式压力传感器的光纤传输技术应用研究. 《传感器与微系统》.
230. 袁伟群，栗保明，孟绍良，林庆华，田慧（2006）. 电容储能脉冲功率源中ROGOWSKI线圈标定方法. 《高电压技术》.
231. 田慧，栗保明（2006）. 电热炮膛压测量的双保险设计. 《工程与试验》.
232. Baoming Li (2006). Applied study on fiber-optic transmission of piezoelectric pressure sensor. Transducer and Microsystem Technologies.
233. Baoming Li (2006). A Numerical Study on the Radiative Energy Distribution of Arc Plasma in the Propellant Bed. Journal of Ballistics.
234. Fuzhi Tian, Baoming Li, Daniel Y. Kwok (2006). Lattice Boltzmann Simulation of Electroosmotic Flows in Micro- and Nanochannels. International Conference on MEMS, NANO, and Smart Systems.DOI
235. 田慧，袁伟群，王义，栗保明（2005）. X射线数字化仪在弹道研究中的应用. 《南京理工大学学报》.
236. 林庆华，栗保明（2005）. 等离子体辐射对固体火药燃烧速度影响的研究. 《弹道学报》.
237. 袁伟群，栗保明（2005）. 阻容型分压器在脉冲电容器放电特性研究中的应用. 《南京理工大学学报》.
238. 田慧，栗保明（2005）. 强电磁干扰下Scandiflash X射线系统外触发技术. 《弹道学报》.
239. 袁伟群，王争论，栗保明（2005）. 等离子体发生器阴极电位浮动及其影响. 《南京理工大学学报》.
240. 孟绍良，成剑，栗保明（2005）. 脉冲成形网络与毛细管等离子体发生器的计算. 《弹箭与制导学报》.
241. Baoming Li (2005). Fluctuation of Plasma Generator’s Cathode Potential and Its Effects. Journal of Nanjing University of Science and Technology.
242. Baoming Li (2005). The Coupled Calculation of Capacitor-based Pulsed Forming Network and Ablation-controlled Arc Plasma Generator. Journal of Projectiles.Rockets.Missiles and Guidance.
243. 田慧，杨春霞，林庆华，孟绍良，栗保明（2004）. 瞬态过程的X射线数字化成象技术研究. 《第三届全国爆炸力学实验技术交流会论文集》.
244. 李海元，栗保明，李鸿志，宁广炯，王争论，杨春霞（2004）. 等离子体点火密闭爆发器中火药燃速特性的研究. 《爆炸与冲击》.
245. 田慧，林庆华，孟绍良，栗保明（2004）. 电热发射测试系统的高电压隔离技术研究. 《弹道学报》.
246. 孟绍良，栗保明（2004）. 用于电热化学发射实验的脉冲电源系统. 《弹道学报》.
247. 成剑，栗保明（2004）. 一种中心电弧等离子体发生器的理论模型与实验研究. 《实验流体力学》.
248. 杨春霞，赵宝昌，栗保明（2004）. 一种低易损固体发射药的等离子体点火及燃烧特性. 《火炸药学报》.
249. Baoming Li (2004). Model and experimental study of a piccolo arc plasma generator. Experiments and Measurements in Fluid Mechanics.
250. Baoming Li (2004). Ignition and Combustion Behavior of a Type of LOVA Solid Propellant.
251. 成剑，栗保明（2003）. 电爆炸过程导体放电电阻的一种计算模型. 《南京理工大学学报》.
252. 袁伟群，栗保明，顾金良，马昀（2003）. 电磁环境下电热化学炮膛压测量技术. 《弹道学报》.
253. 宁广炯，林庆华，杨春霞，李海元，栗保明（2003）. TVD格式在等离子体增强含能材料燃烧模拟中的应用. 《弹道学报》.
254. 成剑，栗保明（2003）. 消融毛细管等离子体发生器一维数值仿真. 《兵工学报》.
255. 戴荣，栗保明（2003）. 电热化学炮等离子体增强燃烧过程研究. 《兵工学报》.
256. 袁伟群，栗保明，顾金良（2003）. 电热化学炮VXI测控系统集成技术研究. 《兵工学报》.
257. 王争论，成剑，栗保明（2003）. 高压受限电弧等离子体发生器实验研究. 《南京理工大学学报》.
258. 袁伟群，栗保明（2003）. 外积分式Rogowski线圈电流畸变校正方法的研究. 《南京理工大学学报》.
259. 成剑，栗保明（2003）. 电热毛细管材料消融中蒸气罩的研究. 《南京理工大学学报》.
260. 李海元，栗保明，李鸿志，林庆华（2003）. 固体工质电热化学炮内弹道二维模型研究. 《弹箭与制导学报》.
261. 王争论，成剑，栗保明（2003）. 中心电弧管内受限高压放电的实验研究. 《弹箭与制导学报》.
262. 成剑，栗保明（2003）. 弱非理想等离子体电导率模型比较研究. 《中国科学技术大学学报》.
263. 王争论，林庆华，栗保明（2002）. 中心式等离子体发生器的实际消融模型. 《弹道学报》.
264. 孟绍良，栗保明（2002）. 程控化脉冲能源在电热加速器中的应用. 《弹道学报》.
265. 李海元，栗保明，李鸿志（2002）. 膛内等离子体点火及燃烧增强过程数值模拟. 《爆炸与冲击》.
266. 成剑，栗保明（2002）. 消融控制电弧等离子体发生器中毛细管消融模型研究. 《自然科学进展》.
267. 李海元，栗保明（2002）. 用激光测量高热可靠性电子器件的热变形. 《光谱学与光谱分析》.
268. 董健年，李鸿志，栗保明（2001）. 大功率二极管脉冲功率源中的过渡过程. 《弹道学报》.
269. 李海元，栗保明，李鸿志，吴轩（2001）. 液体工质电热化学炮膛内流动特征研究. 《弹道学报》.
270. 戴荣，栗保明，宁广炯，董健年（2001）. SPETC炮等离子体发生器自由喷射放电特性研究. 《兵工学报》.
271. 戴荣，栗保明，张建奇（2001）. 固体含能工质等离子体单药粒点火特性分析. 《火炸药学报》.
272. Baoming Li, Hong-Zhi Li (2001). ON EMISSION SPECTROSCOPY MEASUREMENTS FROM A DENSE ELECTROTHERMAL LAUNCHER PLASMA.
273. 戴荣，栗保明（2000）. 固体工质电热化学炮膛内两相流模型与计算. 《南京理工大学学报》.
274. 张玉荣，金志明，栗保明，余永刚（2000）. RLPG液体射流流动特性的实验测试研究. 《兵工学报》.
275. 栗保明，李鸿志，袁伟群（2000）. 消融控制电弧等离子体发生器放电特性的实验研究. 《实验流体力学》.
276. 戴荣，栗保明，宁广炯（2000）. 电热消融毛细管几何参数放电实验研究. 《弹道学报》.
277. 李海元，栗保明（2000）. 高热可靠性电子器件热变形模拟. 《弹道学报》.
278. 耿继辉，许厚谦，陈国旺，栗保明（2000）. 激波加速条件下颗粒群阻力系数. 《自然科学进展》.
279. 吴轩，栗保明，卢顺祥（1999）. 液体工质电热化学发射过程燃烧特性分析. 《南京理工大学学报》.
280. 吴轩，栗保明，李鸿志（1999）. 液体工质电热化学炮的两维多相流模型研究. 《弹道学报》.
281. 戴荣，栗保明，卢顺祥（1999）. 固体发射药等离子体点火过程及弹道效应分析. 《爆炸与冲击》.
282. 栗保明，李鸿志，沈志海（1999）. 消融控制电弧等离子体热力学与输运性质的计算方法. 《弹道学报》.
283. 戴荣，栗保明（1999）. 电热轻气炮电弧电阻计算及其弹道分析. 《南京理工大学学报》.
284. 张玉荣，余永刚，栗保明（1999）. 高速液体射流流动特性的实验测试方法. 《力学与实践》.
285. 栗保明，李鸿志，卢顺祥（1999）. 消融控制电弧等离子体发生器的数值模拟. 《弹道学报》.
286. Baoming Li, Hong-Zhi Li (1999). A time-dependent one-dimensional model of ablation-controlled arcs in electrothermal launchers. Digest of Technical Papers. 12th IEEE International Pulsed Power Conference. (Cat. No.99CH36358).DOI
287. 戴荣，栗保明（1998）. 电热加速器集总参数模型弹道效应分析. 《弹道学报》.
288. 卢顺祥，栗保明，吴轩（1998）. 电热加速器中毛细管高压放电特性分析. 《南京理工大学学报》.
289. 金志明，栗保明，余永刚（1998）. 高速液体受限射流扩展形态研究. 《爆炸与冲击》.
290. 卢顺祥，栗保明，吴轩（1998）. 电热增强型固体发射药火炮内弹道模拟研究. 《弹道学报》.
291. Jun-De Wang, Baoming Li, Bing-He Gu, Jian-qiu Zhang, Xin-Huan Huang, Jian-Nian Dong, Hong-Zhi Li (1998). The Study on the Arc Plasma Temperature Measurement by Optical Emission Spectroscopy with Fiber Optical Transmission.DOI
292. Baoming Li, W. Roetzel (1998). HEAT IGNITION MODELLING TO AN ENERGETIC PARTICLE EXPOSED TO A THERMAL PLASMA.DOI
293. 吴轩，栗保明，卢顺祥（1997）. 液体工质电热化学发射过程内弹道特性分析. 《弹道学报》.
294. 栗保明，官汉章，金志明（1995）. 再生式液体发射药火炮初期流量控制的弹道效应. 《火炮发射与控制学报》.
295. 栗保明，金志明（1995）. 再生式液体药火炮中受限射流雾化性能的研究. 《兵工学报》.
296. 栗保明，黄新华（1995）. 高压喷嘴流量系数的实验测定. 《测试技术学报》.
297. 栗保明，官汉章，焦化南（1995）. 高频压力振荡引起压电式传感器受损现象的分析. 《测试技术学报》.
298. 栗保明（1994）. 再生喷射燃烧过程中高频压力振荡的分析. 《南京理工大学学报》.
299. 杨涛，金志明，栗保明（1992）. 火药床的准静态压缩研究. 《高压物理学报》.
300. 金志明，栗保明，杨涛（1992）. 液体射流破碎机理及其在再生式液体发射药火炮中的应用. 《弹道学报》.
301. 杨涛，金志明，栗保明（1991）. 高装填密度火药颗粒床燃烧转爆轰的数值分析. 《弹箭与制导学报》.

书籍章节

1. Honge Luo, Jinliang Gu, Ping Chen, Yan Xia, Baoming Li (2012). Stripes Modulating Photograph Technology Researches to Obtain the Shape Information of Fast Moving Objects. Lecture notes in electrical engineering.DOI