张浩宇｜沈阳工业大学｜学者主页

2026

A novel microstructure regulation strategy for breaking through 1.2 GPa room-temperature strength in FeMnCrCo HEAs via rolling: grain refinement + deformation twinning + stacking fault-induced HCP transformation

Jinke Han, Ge Zhou, Haoyu Zhang, Siqian Zhang, Chenyang Lu, Zhengxiong Su, Lijia Chen

Materials Letters

DOI

2026

Physical-information machine learning for strength and ductility prediction of metastable β titanium alloys

Linfan Sun, Haoyu Zhang, Zhiduo Liu, Jun Hua Cheng, Ge Zhou, Ximin Zang, Lijia Chen, Peter Kaehuei Liaw

Materials Research Letters

DOI

2026

Effect of Low-Angle Grain boundary crystallography on High-Temperature fatigue of DD413 Nickel-Based superalloy

Qiaozhi Xu, Siqian Zhang, Ge Zhou, Haoyu Zhang, Dong Wang, Lijia Chen

Engineering Failure Analysis

DOI

2026

Regulating heterogeneous microstructures for enhanced strength-ductility and isotropy in titanium alloy

Zhipeng Zhang, Ge Zhou, Haoyu Zhang, Siqian Zhang, Jinke Han, Bingqian Jin, N N Zhang, Lijia Chen, Qi Shi, Peter Kaehuei Liaw

Journal of Alloys and Compounds

DOI

2026

Effect of low-angle grain boundaries on high-temperature fatigue crack behavior in DD413 nickel-based superalloy

Qiaozhi Xu, Siqian Zhang, Ge Zhou, Haoyu Zhang, Dong Wang, Lijia Chen

Materials Today Communications

DOI

2026

Effects of microstructures on corrosion behavior of Ti-4Al-6Mo-2V-5Cr-2Zr alloy in 5 mol/L HCl solution

Shengyuan Wang, Ruochong Liu, Haoyu Zhang, Ge Zhou, Siqian Zhang, Lijia Chen

Corrosion Communications

DOI

2025

α相对亚稳β钛合金Ti-5.5Cr-5Al-4Mo-3Nb-2Zr在3.5%NaCl溶液中应力腐蚀行为的影响

刘璇，张浩宇，王圣元，周舸，程军，陈立佳

《稀有金属材料与工程》

2025

激光功率和扫描速度对SLM制备Ti5553合金性能的影响

王铭宇，李述军，和正华，唐明德，张思倩，张浩宇，周舸，陈立佳

《材料研究学报》

2025

不同热处理方式下Ti-3Al-5Mo-4Nb-4Cr-2Zr合金组织与拉伸性能

王川，李超，陈立佳，王淑敏，张浩宇

《中国冶金》

DOI

2025

A machine learning multitasking integrated framework and its derived [Mo]eq-[Fe]eq map for designing TRIP titanium alloys

Zhiduo Liu, Haoyu Zhang, Linfan Sun, Chuan Wang, Ge Zhou, Ximin Zang, Lijia Chen

Materials & Design

DOI

2025

Investigating the Hot Deformation Behavior of Ti-3Al-5Mo-4Nb-4Cr-2Zr Alloy Utilizing Constitutive Models and the Firefly BP-ANN Model

Chuan Wang, Haoyu Zhang, Shuai Zhang, Lijia Chen, Shumin Wang, Chao Li, Jun Mei Cheng, Yingjie Wu

Journal of Materials Engineering and Performance

DOI

2025

Research on the sensitivity behavior of special microstructural transformations during the hot deformation process of Fe49Mn33.2Cr9.6Co8.2 high-entropy alloy

Xinlu Xu, Ge Zhou, Jinke Han, Yuhan Peng, Haoyu Zhang, Siqian Zhang, Chenyang Lu, Lijia Zhao, Lijia Chen, Peter Kaehuei Liaw

Materials Today Communications

DOI

2025

Machine learning for hot deformation flow stress prediction and dynamic recrystallization in Fe24.75Ni19.8Co9.9Cr14.85Al10.9Mn14.85Si4.95 high-entropy alloy

Yiwen Hu, Haoyu Zhang, Jun Mei Cheng, Ge Zhou, Ximin Zang, Chuan Wang, Jie Yang, Lijia Chen

Intermetallics

DOI

2025

A comprehensive evaluation of the theoretical models for the constitutive relationship of Fe49Mn33.2Cr9.6Co8.2 high-entropy alloy based on microstructural evolution

Jinke Han, Ge Zhou, Xinlu Xu, Yuhan Peng, Shuchang Guo, Haoyu Zhang, Siqian Zhang, Lijia Chen, Peter Kaehuei Liaw

Materials Characterization

DOI

2025

Establishing a quantitative relationship between processing, microstructure, and formability in Ni47Ti33Hf20 shape memory alloy through multivariate decision tree optimization

Wenjingzi Wang, Ge Zhou, Haoyu Zhang, Siqian Zhang, Nannan Zhang, Lijia Chen, Peter Kaehuei Liaw

Journal of Material Science and Technology

DOI

2025

AI-driven prediction and intelligent evaluation of flow stress model, processing performance, and microstructural evolution during hot deformation of Ni47Ti33Hf20 alloy

Wenjingzi Wang, Ge Zhou, Jinke Han, Chao Cai, Haoyu Zhang, Siqian Zhang, Nannan Zhang, Lijia Chen

Materials Today Communications

DOI

2025

Study on Integrated Hot Processing Map of Ti-3Mo-6Cr-3Al-3Sn Titanium Alloy Based on Different Flow Instability Criteria

Xuejia Liu, Haoyu Zhang, Yanxiang Zhang, Yang Wang, Feng Zhou Fang

JOM

DOI

2025

A strategy for Triple-TRIP-induced ultra-high room-temperature ductility of high-entropy alloys

Jinke Han, Ge Zhou, Haoyu Zhang, Siqian Zhang, Mingjiu Zhao, Chenyang Lu, Zhengxiong Su, Yuhan Peng, Xin Che, Lijia Chen, Peter Kaehuei Liaw

Scripta Materialia

DOI

2025

Microstructure evolution and plastic deformation behavior of DR-B2/ID-FCC phase lightweight high entropy alloy during improving thermal processing properties

Xueyu Jiang, Xin Che, Haoyu Zhang, Siqian Zhang, Xuelong Wen, Ge Zhou, Lijia Chen, Peter Kaehuei Liaw

Journal of Manufacturing Processes

DOI

2025

Dynamic Recrystallization Grain Identification for a Duplex-Phase Titanium Alloy Based on a Machine Learning Method

Shuai Zhang, Haoyu Zhang, Jie Sun, Liyuan Yan, Chuan Wang, Ge Zhou, Lijia Chen

Metals and Materials International

DOI

2025

Energy dissipation mechanism of grain boundary migration - adiabatic shear behavior in the AlCoCr2Fe2.5Ni2Mn1.5 high-entropy alloy during hot deformation

Shuchang Guo, Ge Zhou, Yuhan Peng, Haoyu Zhang, Siqian Zhang, Jinke Han, Lijia Zhao, Lijia Chen

Journal of Alloys and Compounds

DOI

2024

不同相组成近β钛合金Ti-3Al-5Mo-4Nb-4Cr-2Zr的应力腐蚀行为

王川，张浩宇，陈立佳，周舸，程军，张思倩

《稀有金属材料与工程》

2024

不同尺寸的α相对亚稳β钛合金Ti-5.5Cr-5Al-4Mo-3Nb-2Zr拉伸性能的影响（英文）

劳振宏，张浩宇，王圣元，程军，谭兵，周舸，张思倩，陈立佳

《稀有金属材料与工程》

2024

时效温度对Ti-35Nb-5Ta-7Zr合金α相特征及力学性能和腐蚀行为的影响

王浩楠，和正华，张思倩，庞雯露，周舸，张浩宇，朱晓飞，陈立佳

《材料热处理学报》

2024

The contribution of γ' phase transition induced (PI-CDRX) - CDRX-DDRX alternating cycling behavior to the hot formability of GH4079 alloy

Xiaojie Zhang, Chengchuang Tao, Ge Zhou, Haoyu Zhang, Siqian Zhang, Xin Ma, Bin Gan, Lijia Chen

Materials Characterization

DOI

2024

A machine learning method approach for designing novel high strength and plasticity metastable β titanium alloys

Zhiduo Liu, Haoyu Zhang, Shuai Zhang, Jun Jie Cheng, Yixuan He, Ge Zhou, J.L. Liu, Suping Song, Lijia Chen

Progress in Natural Science Materials International

DOI

2024

Phenomenological Constitutive Model and Physical Constitutive Model of Hot Deformed Dual-Phase Ti-5Al-4Sn-2Zr-5Mo Alloy

Yangyang Man, Haoyu Zhang, Jun Mei Cheng, Ge Zhou, Lijia Chen, Nannan Zhang, Yingbin Jiang, Yinghui Wang

JOM

DOI

2024

Influence of phase composition and stress on the corrosion behavior of metastable β titanium alloy Ti-5Mo-5V-6Cr-3Al in 15 wt% HCl solution

Liyuan Yan, Haoyu Zhang, Shuai Zhang, Jun Jie Cheng, Ge Zhou, Yixuan He, Lijia Chen

Journal of Alloys and Compounds

DOI

2024

Prediction of flow and dynamic recrystallization behavior based on three machine learning methods for a novel duplex-phase titanium alloy

Shuai Zhang, Haoyu Zhang, Chuan Wang, Ge Zhou, Jun Mei Cheng, Zhongshi Zhang, Xiaohu Wang, Lijia Chen

Intermetallics

DOI

2024

Thermal Processing Map Study of the GH99 Nickel-Based Superalloy Based on Different Instability Criteria

Yuhan Peng, Xin Ma, Xueyu Jiang, Ge Zhou, Haoyu Zhang, Siqian Zhang, Lijia Chen

Crystals

DOI

2024

A machine learning method based on TPE-XGBoost model for TRIP/TWIP near-β titanium alloy design

Zheng Wang, Haoyu Zhang, Shengyuan Wang, Jun Jie Cheng, Chuan Wang, Ge Zhou, Siqian Zhang, Lijia Chen

Materials Today Communications

DOI

2024

Exploring microstructure evolution and machine-learning methods based on SCAT-CIWOA-BP-DMM theory during hot deformation of 56Ni–32Ti–12Hf alloy

Chunzhe Fu, Chengchuang Tao, Hongjun Huang, Ge Zhou, Xuejian Lin, Haoyu Zhang, Lijia Chen, Xiaoguang Yuan

Intermetallics

DOI

2024

Effect of Aging Temperature on Secondary α Phase and Tensile Properties of Ti-5.5Cr-5Al-4Mo-3Nb-2Zr

Zhenhong Lao, Haoyu Zhang, Shengyuan Wang, Ge Zhou, Siqian Zhang, Lijia Chen, Qifeng Li

Journal of Materials Engineering and Performance

DOI

2024

Study of Processing Map of GH4079 Alloy Based on Different Instability Criteria

Xiaojie Zhang, Ge Zhou, Haoyu Zhang, Siqian Zhang, Xin Ma, Bin Gan, Lijia Chen

JOM

DOI

2024

Influence of the special behavior of interpass retention-relaxation on the softening mechanism of precipitation strengthened GH99 alloy during multi-pass hot deformation

Xin Ma, Ge Zhou, Xiaojie Zhang, Xueyu Jiang, Haoyu Zhang, Siqian Zhang, Lijia Chen, Peter Kaehuei Liaw

Journal of Alloys and Compounds

DOI

2024

Effects of microstructure on high-cycle fatigue properties of Ti-4Al-6Mo-2V-5Cr-2Zr alloy

Shengyuan Wang, Haoyu Zhang, Ge Zhou, Xiaobo Chen, Lijia Chen, Lijia Chen

International Journal of Fatigue

DOI

2024

Thermal deformation behavior investigation of Ti–10V–5Al-2.5fe-0.1B titanium alloy based on phenomenological constitutive models and a machine learning method

Shuai Zhang, Haoyu Zhang, Xuejia Liu, Shengyuan Wang, Chuan Wang, Ge Zhou, Siqian Zhang, Lijia Chen

Journal of Materials Research and Technology

DOI

2023

两种不同热处理工艺下亚稳β钛合金Ti-6Mo-5V-3Al-2Fe-2Zr的低周疲劳行为

刘知多，张浩宇，周舸，程军，张兴君，陈立佳

《稀有金属材料与工程》

2023

Study of the effect of dual-phase transformation on the processing map of Al 0.9 FeCoNiCr high-entropy alloys under peak stress conditions

Jianlin Li, Ge Zhou, Jinke Han, Yuhan Peng, Haoyu Zhang, Siqian Zhang, Lijia Chen, Xue Cao

Philosophical Magazine Letters

DOI

2023

Investigation of the Hot Deformation Behavior and Mechanism of a Medium-Entropy CoCr0.4NiSi0.3 Alloy

Li Kun Zhang, Hui Jun Zhao, Lijia Chen, Feng Li, Weiqiang Zhang, Ge Zhou, Haoyu Zhang, Ningning Geng

Crystals

DOI

2023

Hot deformation behavior of near-β titanium alloy Ti-3Mo-6Cr-3Al-3Sn based on phenomenological constitutive model and machine learning algorithm

Xuejia Liu, Haoyu Zhang, Shuai Zhang, Wen Jie Peng, Ge Zhou, Chuan Wang, Lijia Chen

Journal of Alloys and Compounds

DOI

2023

Effect of Heat Treatment on the Corrosion Resistance of AlFeCoNiMo0.2 High-Entropy Alloy in NaCl and H2SO4 Solutions

Yuhan Peng, Ge Zhou, Jinke Han, Jianlin Li, Haoyu Zhang, Siqian Zhang, Lin Li, Lijia Chen, Xue Cao

Metals

DOI

2023

Dynamic recrystallization behavior of β grains in hot deformed Ti-6Mo-5 V-3Al-2Fe alloy

Lin Han, Haoyu Zhang, Chuan Wang, Ge Zhou, Siqian Zhang, Lijia Chen

The International Journal of Advanced Manufacturing Technology

DOI

2023

High Temperature Deformation Behavior of Near-β Titanium Alloy Ti-3Al-6Cr-5V-5Mo at α + β and β Phase Fields

Haoyu Zhang, Shuo Zhang, Shuai Zhang, Xuejia Liu, Xiaoxi Wu, Siqian Zhang, Ge Zhou

Crystals

DOI

2023

Dynamic recrystallization behavior of single-phase BCC structure AlFeCoNiMo0.2 high-entropy alloy

Jianlin Li, Ge Zhou, Jinke Han, Yuhan Peng, Haoyu Zhang, Siqian Zhang, Lijia Chen, Xue Cao

Journal of Materials Research and Technology

DOI

2023

Special Hot Working Plastic Deformation Behavior and Microstructure Evolution Mechanism of Single-Phase Bcc Structure Alfeconimo0.2 High-Entropy Alloy

Jianlin Li, Ge Zhou, Jinke Han, Haoyu Zhang, Yuhan Peng, Lijia Chen, Xue Cao, Peter Kaehuei Liaw

Journal of Alloys and Compounds

DOI

2022

Ti-6Mo-5V-3Al-2Fe-2Zr合金中次生α相对强度和塑性的影响

张浩宇，王川，刘丹，程军，周舸，陈立佳

《稀有金属材料与工程》

2022

固溶温度对Ti-4Al-6Mo-2V-5Cr-2Zr钛合金的组织和拉伸性能的影响

王圣元，张浩宇，周舸，陈晓博，陈立佳

《材料研究学报》

2022

Effect of Secondary α Phase on Stress Corrosion Cracking of a Novel Metastable β Titanium Alloy in 3.5% NaCl Solution

Haoyu Zhang, Chuan Wang, Shuai Zhang, Xiaoling Yu, Ge Zhou, Zhiqiang Zhang, Lijia Chen

Crystals

DOI

2022

Effect of aging treatment on microstructure and tensile properties of Ti–4Al–6Mo–2V–5Cr–2Zr

Shengyuan Wang, Lijia Chen, Xiaobo Chen, Haoyu Zhang, Ge Zhou

Journal of Materials Research and Technology

DOI

2022

Influence of Phase Composition on Stress-Corrosion Cracking of Ti-6Mo-5V-3Al-2Fe-2Zr Alloy in 3.5% NaCl Solution

Haoyu Zhang, Jie Sun, Ge Zhou, Xiaoling Yu, Chuan Wang, Jian Guo Gao

Crystals

DOI

2022

A comparative study of flow instability criteria in the processing map of AlFeCoNiMo0.2 high-entropy alloys

Jianlin Li, Jinke Han, Fance Song, Haoyu Zhang, Ge Zhou, Lijia Chen, Xue Cao

Philosophical Magazine Letters

DOI

2022

Vacuum-induced multistage atomization for preparation of TC11 alloy 3D printing powder

Zhipeng Zhang, Ge Zhou, Chen Tian, Haoyu Zhang, Feng Li, Qi Shi, Xin Liu, Lijia Chen

Journal of Materials Research and Technology

DOI

2022

Structure evolution mechanism and physical modeling of Ni60Ti40 during dynamic recrystallization

Ge Zhou, Chuan Wang, Jianlin Li, Jinke Han, Haoyu Zhang, Siqian Zhang, Lijia Chen

Materials Characterization

DOI

2022

Dependence of strength and ductility on secondary α phase in a novel metastable-β titanium alloy

Haoyu Zhang, Chuan Wang, Ge Zhou, Siqian Zhang, Lijia Chen

Journal of Materials Research and Technology

DOI

2022

Modelling of cavity growth during the superplastic flow of a fine-grained Ti–6Al–4V titanium alloy processed by direct rolling

Xin Wang, Ge Zhou, Chao Liu, Siqian Zhang, Haoyu Zhang, Feng Li, Lijia Chen

Philosophical Magazine Letters

DOI

2022

Superplastic Deformation Behaviors and Power Dissipation Rate for Fine-Grained Ti-6Al-4V Titanium Alloy Processed by Direct Rolling

Xin Wang, Ge Zhou, Yue Men, Siqian Zhang, Haoyu Zhang, Feng Li, Lijia Chen

Crystals

DOI

2021

Thermal Deformation Behavior of Ti-6Mo-5V-3Al-2Fe Alloy

Lin Han, Haoyu Zhang, Jun Hua Cheng, Ge Zhou, Chuan Wang, Lijia Chen

Crystals

DOI

2021

Dislocation-Controlled Low-Temperature Superplastic Deformation of Ti-6Al-4V Alloy

Chao Liu, Xin Wang, Ge Zhou, Feng Li, Siqian Zhang, Haoyu Zhang, Lijia Chen, Haijian Liu

Frontiers in Materials

DOI

2020

固溶温度对亚稳β钛合金Ti-4Mo-6Cr-3Al-2Sn的组织和拉伸性能的影响

王鹏宇，张浩宇，张志鹏，孙杰，谢广明，程军，陈立佳

《材料研究学报》

2020

Investigation of the Hydraulic Servo System of the Rolling Mill Using Nonsingular Terminal Sliding Mode-Active Disturbance Rejection Control

Jining Guo, Haoyu Zhang, Desheng Liu

Mathematical Problems in Engineering

DOI

2020

Cyclic Stress Response Behavior of Near β Titanium Alloy and Deformation Mechanism Associated with Precipitated Phase

Siqian Zhang, Haoyu Zhang, Junhong Hao, Jing Liu, Jie Sun, Lijia Chen

Metals

DOI

2020

Theoretical predication of dislocation-included high-temperature deformation mechanism maps for GH4742 alloy

Ge Zhou, Jianlin Li, Chao Liu, Haoyu Zhang, Xin Che, Xiaofei Zhu, Lijia Chen

Philosophical Magazine Letters

DOI

2020

Low-cycle fatigue behavior of Ti-6Mo-5V-3Al-2Fe alloy with various types of secondary α phase

Haoyu Zhang, Zhi-Peng Zhang, Zhengyuan Li, Jie Sun, Xin Che, Si-Qian Zhang, Yu Liang, Lijia Chen

Materials Research Express

DOI

2020

Damage Adaptive Titanium Alloy by In-Situ Elastic Gradual Mechanism

Siqian Zhang, Jing Liu, Haoyu Zhang, Jie Sun, Lijia Chen

Materials

DOI

2019

时效温度对一种新型β钛合金组织演变及力学性能的影响（英文）

张浩宇，黎小辉，林立，张思倩，王川，陈立佳

《稀有金属材料与工程》

2019

板带材冷轧自动化

张浩宇

2019

Rheological Law and Mechanism for Superplastic Deformation of Ti–6Al–4V

Chao Liu, Ge Zhou, Xin Wang, Jiajing Liu, Jianlin Li, Haoyu Zhang, Lijia Chen

Materials

DOI

2018

实验轧机液压伺服零偏自愈控制

张浩宇，王川，孙杰，陈立佳，张殿华

《轧钢》

DOI

2018

Evolution of Secondary α Phase during Aging Treatment in Novel near β Ti-6Mo-5V-3Al-2Fe Alloy

Haoyu Zhang, Chuan Wang, Siqian Zhang, Ge Zhou, Lijia Chen

Materials

DOI

2015

板带冷连轧自动化系统的现状与展望

张殿华，陈树宗，李旭，孙杰，张欣，张浩宇

《轧钢》

2014

高精度冷连轧厚度控制策略的研究与应用

张浩宇

《东北大学》

2014

Modeling and Analysis of Interstand Tension Control in 6-high Tandem Cold Rolling Mill

Xin Zhang, Shu-zong Chen, Haoyu Zhang, Xiwen Zhang, Dianhua Zhang, Jie Sun

Journal of Iron and Steel Research International

DOI

2013

冷连轧末机架厚度控制策略的优化

张浩宇，张殿华，孙杰，李旭

《轧钢》

2013

基于流量预估的直拉式冷轧机液压张力控制策略

张浩宇，孙杰，张殿华，曹剑钊

《材料与冶金学报》

2012

首钢京唐酸轧机组厚度控制策略分析与应用

郭剑飞，刘翠红，张浩，孙杰，张浩宇

《材料与冶金学报》

2010

1450mm冷连轧机厚度控制系统研究与应用

张浩宇

《东北大学》

精选作品

期刊论文

A novel microstructure regulation strategy for breaking through 1.2 GPa room-temperature strength in FeMnCrCo HEAs via rolling: grain refinement + deformation twinning + stacking fault-induced HCP transformation

Physical-information machine learning for strength and ductility prediction of metastable β titanium alloys

Effect of Low-Angle Grain boundary crystallography on High-Temperature fatigue of DD413 Nickel-Based superalloy

Regulating heterogeneous microstructures for enhanced strength-ductility and isotropy in titanium alloy

Effect of low-angle grain boundaries on high-temperature fatigue crack behavior in DD413 nickel-based superalloy

Effects of microstructures on corrosion behavior of Ti-4Al-6Mo-2V-5Cr-2Zr alloy in 5 mol/L HCl solution

α相对亚稳β钛合金Ti-5.5Cr-5Al-4Mo-3Nb-2Zr在3.5%NaCl溶液中应力腐蚀行为的影响

激光功率和扫描速度对SLM制备Ti5553合金性能的影响

不同热处理方式下Ti-3Al-5Mo-4Nb-4Cr-2Zr合金组织与拉伸性能

A machine learning multitasking integrated framework and its derived [Mo]eq-[Fe]eq map for designing TRIP titanium alloys

Investigating the Hot Deformation Behavior of Ti-3Al-5Mo-4Nb-4Cr-2Zr Alloy Utilizing Constitutive Models and the Firefly BP-ANN Model

Research on the sensitivity behavior of special microstructural transformations during the hot deformation process of Fe49Mn33.2Cr9.6Co8.2 high-entropy alloy

Machine learning for hot deformation flow stress prediction and dynamic recrystallization in Fe24.75Ni19.8Co9.9Cr14.85Al10.9Mn14.85Si4.95 high-entropy alloy

A comprehensive evaluation of the theoretical models for the constitutive relationship of Fe49Mn33.2Cr9.6Co8.2 high-entropy alloy based on microstructural evolution

Establishing a quantitative relationship between processing, microstructure, and formability in Ni47Ti33Hf20 shape memory alloy through multivariate decision tree optimization

AI-driven prediction and intelligent evaluation of flow stress model, processing performance, and microstructural evolution during hot deformation of Ni47Ti33Hf20 alloy

Study on Integrated Hot Processing Map of Ti-3Mo-6Cr-3Al-3Sn Titanium Alloy Based on Different Flow Instability Criteria

A strategy for Triple-TRIP-induced ultra-high room-temperature ductility of high-entropy alloys

Microstructure evolution and plastic deformation behavior of DR-B2/ID-FCC phase lightweight high entropy alloy during improving thermal processing properties

Dynamic Recrystallization Grain Identification for a Duplex-Phase Titanium Alloy Based on a Machine Learning Method

Energy dissipation mechanism of grain boundary migration - adiabatic shear behavior in the AlCoCr2Fe2.5Ni2Mn1.5 high-entropy alloy during hot deformation

不同相组成近β钛合金Ti-3Al-5Mo-4Nb-4Cr-2Zr的应力腐蚀行为

不同尺寸的α相对亚稳β钛合金Ti-5.5Cr-5Al-4Mo-3Nb-2Zr拉伸性能的影响（英文）

时效温度对Ti-35Nb-5Ta-7Zr合金α相特征及力学性能和腐蚀行为的影响

The contribution of γ' phase transition induced (PI-CDRX) - CDRX-DDRX alternating cycling behavior to the hot formability of GH4079 alloy

A machine learning method approach for designing novel high strength and plasticity metastable β titanium alloys

Phenomenological Constitutive Model and Physical Constitutive Model of Hot Deformed Dual-Phase Ti-5Al-4Sn-2Zr-5Mo Alloy

Influence of phase composition and stress on the corrosion behavior of metastable β titanium alloy Ti-5Mo-5V-6Cr-3Al in 15 wt% HCl solution

Prediction of flow and dynamic recrystallization behavior based on three machine learning methods for a novel duplex-phase titanium alloy

Thermal Processing Map Study of the GH99 Nickel-Based Superalloy Based on Different Instability Criteria

A machine learning method based on TPE-XGBoost model for TRIP/TWIP near-β titanium alloy design

Exploring microstructure evolution and machine-learning methods based on SCAT-CIWOA-BP-DMM theory during hot deformation of 56Ni–32Ti–12Hf alloy

Effect of Aging Temperature on Secondary α Phase and Tensile Properties of Ti-5.5Cr-5Al-4Mo-3Nb-2Zr

Study of Processing Map of GH4079 Alloy Based on Different Instability Criteria

Influence of the special behavior of interpass retention-relaxation on the softening mechanism of precipitation strengthened GH99 alloy during multi-pass hot deformation

Effects of microstructure on high-cycle fatigue properties of Ti-4Al-6Mo-2V-5Cr-2Zr alloy

Thermal deformation behavior investigation of Ti–10V–5Al-2.5fe-0.1B titanium alloy based on phenomenological constitutive models and a machine learning method

两种不同热处理工艺下亚稳β钛合金Ti-6Mo-5V-3Al-2Fe-2Zr的低周疲劳行为

Study of the effect of dual-phase transformation on the processing map of Al 0.9 FeCoNiCr high-entropy alloys under peak stress conditions

Investigation of the Hot Deformation Behavior and Mechanism of a Medium-Entropy CoCr0.4NiSi0.3 Alloy

Hot deformation behavior of near-β titanium alloy Ti-3Mo-6Cr-3Al-3Sn based on phenomenological constitutive model and machine learning algorithm

Effect of Heat Treatment on the Corrosion Resistance of AlFeCoNiMo0.2 High-Entropy Alloy in NaCl and H2SO4 Solutions

Dynamic recrystallization behavior of β grains in hot deformed Ti-6Mo-5 V-3Al-2Fe alloy

High Temperature Deformation Behavior of Near-β Titanium Alloy Ti-3Al-6Cr-5V-5Mo at α + β and β Phase Fields

Dynamic recrystallization behavior of single-phase BCC structure AlFeCoNiMo0.2 high-entropy alloy

Special Hot Working Plastic Deformation Behavior and Microstructure Evolution Mechanism of Single-Phase Bcc Structure Alfeconimo0.2 High-Entropy Alloy

Ti-6Mo-5V-3Al-2Fe-2Zr合金中次生α相对强度和塑性的影响

固溶温度对Ti-4Al-6Mo-2V-5Cr-2Zr钛合金的组织和拉伸性能的影响

Effect of Secondary α Phase on Stress Corrosion Cracking of a Novel Metastable β Titanium Alloy in 3.5% NaCl Solution

Effect of aging treatment on microstructure and tensile properties of Ti–4Al–6Mo–2V–5Cr–2Zr

Influence of Phase Composition on Stress-Corrosion Cracking of Ti-6Mo-5V-3Al-2Fe-2Zr Alloy in 3.5% NaCl Solution

A comparative study of flow instability criteria in the processing map of AlFeCoNiMo0.2 high-entropy alloys

Vacuum-induced multistage atomization for preparation of TC11 alloy 3D printing powder

Structure evolution mechanism and physical modeling of Ni60Ti40 during dynamic recrystallization

Dependence of strength and ductility on secondary α phase in a novel metastable-β titanium alloy

Modelling of cavity growth during the superplastic flow of a fine-grained Ti–6Al–4V titanium alloy processed by direct rolling

Superplastic Deformation Behaviors and Power Dissipation Rate for Fine-Grained Ti-6Al-4V Titanium Alloy Processed by Direct Rolling

Thermal Deformation Behavior of Ti-6Mo-5V-3Al-2Fe Alloy

Dislocation-Controlled Low-Temperature Superplastic Deformation of Ti-6Al-4V Alloy

固溶温度对亚稳β钛合金Ti-4Mo-6Cr-3Al-2Sn的组织和拉伸性能的影响

Investigation of the Hydraulic Servo System of the Rolling Mill Using Nonsingular Terminal Sliding Mode-Active Disturbance Rejection Control

Cyclic Stress Response Behavior of Near β Titanium Alloy and Deformation Mechanism Associated with Precipitated Phase

Theoretical predication of dislocation-included high-temperature deformation mechanism maps for GH4742 alloy

Low-cycle fatigue behavior of Ti-6Mo-5V-3Al-2Fe alloy with various types of secondary α phase

Damage Adaptive Titanium Alloy by In-Situ Elastic Gradual Mechanism

时效温度对一种新型β钛合金组织演变及力学性能的影响（英文）

板带材冷轧自动化

Rheological Law and Mechanism for Superplastic Deformation of Ti–6Al–4V

实验轧机液压伺服零偏自愈控制

Evolution of Secondary α Phase during Aging Treatment in Novel near β Ti-6Mo-5V-3Al-2Fe Alloy

板带冷连轧自动化系统的现状与展望

高精度冷连轧厚度控制策略的研究与应用

Modeling and Analysis of Interstand Tension Control in 6-high Tandem Cold Rolling Mill

冷连轧末机架厚度控制策略的优化

基于流量预估的直拉式冷轧机液压张力控制策略

首钢京唐酸轧机组厚度控制策略分析与应用

1450mm冷连轧机厚度控制系统研究与应用

预印本