张恒运

2026

A comparative study of battery state-of-charge estimation using multi-source features with machine learning models

Journal of Energy Storage

DOI

2026

Experimental study of instantaneous force and electrochemical characteristics of prismatic lithium-ion batteries under preload condition

Journal of Energy Storage

DOI

2026

Multi-objective optimization design of lithium-ion batteries based on deep learning and electrochemical-thermal-hydraulic-mechanical model

Proceedings of the Institution of mechanical engineers. Part D, journal of automobile engineering

DOI

2026

Multi-Objective Optimization of CPCM–Liquid Cooling Hybrid Thermal Management Systems for Lithium-Ion Batteries via NSGA-II Optimized Artificial Neural Networks

Batteries

DOI

2026

Review on the thermal management and thermal suppression of high-energy-density lithium-ion batteries based on energy-efficient liquid cooling techniques

Applied Thermal Engineering

DOI

2026

Study on Thermal Runaway Protection Characteristics of Prismatic Lithium-Ion Battery Modules Integrating Sodium Acetate Trihydrate, Aerogel Felt and Liquid Cooling

Batteries

DOI

2026

Experimental characterization of specific heat capacity and dynamic heat generation rate for Lithium-ion battery cells using surface heat flux sensors

Applied Thermal Engineering

DOI

2026

Performance Improvement of a Honeycomb Battery Thermal Management System Based on Fin–Casing Synergistically Enhanced Heat Transfer

Batteries

DOI

2025

基于高效液冷技术的锂离子电池热管理研究进展

《电源技术》

2025

方形电池模组对称蛇形流道液冷板热特性研究

《上海工程技术大学学报》

2025

Experimental and numerical study of expansion of pouch lithium-ion cell considering electrochemical-thermal-mechanical coupling

Journal of Energy Storage

DOI

2025

SOH correlation in coupling with electrochemical impedances and expansion rate for prismatic LiMnO2 lithium-ion batteries

Journal of Energy Storage

DOI

2025

Physics-Based Electrochemical–Thermal–Mechanical–Side Reaction Coupling Aging Model for Lithium-Ion Batteries

Journal of Electronic Materials

DOI

2025

A method for estimating lithium-ion battery state of health based on physics-informed hybrid neural network

Electrochimica Acta

DOI

2025

Multi-objective optimization of lithium-ion battery design via machine learning surrogate model: balancing energy density and capacity loss

Ionics (Kiel)

DOI

2025

A multi-scale electrochemical-thermal–mechanical coupling model for lithium-ion batteries based on layer-wise theory and its stress–strain impact analysis

Ionics (Kiel)

DOI

2025

Coupled Electrochemical‐Thermal‐Mechanical Modeling and Simulation of Multi‐Scale Heterogeneous Lithium‐Ion Batteries

Advanced Theory and Simulations

DOI

2025

Efficient air cooling battery module with central thermal spreader and embedded heat pipes for high discharge rates

International Journal of Green Energy

DOI

2025

A Thermal Runaway Protection Strategy for Prismatic Lithium-Ion Battery Modules Based on Phase Change and Thermal Decomposition of Sodium Acetate Trihydrate

Batteries

DOI

2025

Self-calibrated calorimetry to minimize the measurement uncertainty of the specific heat and heat generation rate for prismatic batteries

International Journal of Heat and Mass Transfer

DOI

2025

Design Optimization of Bionic Liquid Cooling Plate Based on PSO-BP Neural Network Surrogate Model and Multi-Objective Genetic Algorithm

Batteries

DOI

2025

Performance study of a compact battery module integrated with thermal spreader and L-shaped heat pipes under high discharge rates

Applied Thermal Engineering

DOI

2025

State of charge estimation for lithium-ion batteries based on physics-embedded neural network

Journal of Power Sources

DOI

2025

In-situ measurement of the thermophysical properties of cylindrical batteries under calibrated iso-flux condition

Journal of Power Sources

DOI

2025

Development and performance analysis of a multifunctional composite phase change cooling plate for improving battery thermal management

Applied Thermal Engineering

DOI

2024

方形电池模组热蔓延抑制的数值仿真研究

《电源技术》

2024

一步法制备钛酸锂复合电极及其性能研究

《化学工业与工程》

2024

Experimental-numerical studies on thermal conductivity anisotropy of lithium-ion batteries

Journal of Energy Storage

DOI

2024

Online multi-scenario impedance spectra generation for batteries based on small-sample learning

Cell Reports Physical Science

DOI

2024

Performance optimization of a prismatic battery module integrated with PCM, FHP and liquid cooling for rapid discharge operation and abnormal heating conditions

Journal of Energy Storage

DOI

2024

Cooling performance enhanced by integrating multicomponent phase change material and compression spring into air-cooled battery module

Applied Thermal Engineering

DOI

2024

Experimental determination of heat generation rates of lithium-ion batteries by thermal protection method

Science China Technological Sciences

DOI

2024

Development of a Measurement Control System for Thermal Characterization of Lithium-Ion Batteries

International Conference on Computer, Control and Robotics (ICCCR)

DOI

2024

Analysis of electro-chemical impedance and state of health based on permanent expansion for prismatic batteries

Journal of Power Sources

DOI

2024

Thermal Performance Analysis of a Prismatic Lithium-Ion Battery Module under Overheating Conditions

Batteries

DOI

2024

Experimental determinations of thermophysical parameters for lithium-ion batteries: A systematic review

eTransportation

DOI

2023

基于微小槽道的冷媒直冷电池热管理系统性能研究与优化

《过程工程学报》

2023

圆柱电池模组的热电制冷与温控性能分析

《上海工程技术大学学报》

2023

锂离子占位情况对钛酸锂结构及性能的影响

《稀有金属材料与工程》

2023

锂离子电池模组热扩散结构的优化

《机械设计与制造》

2023

基于电化学-热耦合模型的锂离子电池组件产热分析

《储能科学与技术》

2023

Thermal Management for Battery Module with Liquid-Cooled Shell Structure under High Charge/Discharge Rates and Thermal Runaway Conditions

Batteries

DOI

2023

Wide range temperature thermal performance of power battery module with double-sided thermoelectric device system with high energy efficiency

Applied Thermal Engineering

DOI

2023

Experimental and numerical study of lithium-ion battery thermal management system using composite phase change material and liquid cooling

Journal of Energy Storage

DOI

2023

Numerical investigation on the elastoplastic behavior and fatigue life of the current collector of lithium-ion batteries based on the electrochemical-thermal-mechanical coupling model

Journal of Energy Storage

DOI

2023

Thermal parameters of cylindrical power batteries: Quasi-steady state heat guarding measurement and thermal management strategies

Applied Thermal Engineering

DOI

2023

Low cost energy-efficient preheating of battery module integrated with air cooling based on a heat spreader plate

Applied Thermal Engineering

DOI

2023

Numerical Investigation on the Impact of Linear Variation of Positive Electrode Porosity upon the Performance of Lithium-Ion Batteries

Journal of the Electrochemical Society

DOI

2023

Thermal Management of Lithium-Ion Batteries Based on Honeycomb-Structured Liquid Cooling and Phase Change Materials

Batteries

DOI

2023

Analysis of heat generation in lithium-ion battery components and voltage rebound based on electrochemical and thermal coupled model

Journal of Energy Storage

DOI

2023

A High-Performance Vortex Adjustment Design for an Air-Cooling Battery Thermal Management System in Electric Vehicles

Batteries

DOI

2023

Does the electrolyte flow in a lithium-ion battery? A perspective from the electrochemical–thermal–hydraulic–mechanical coupling in porous media

The Physics of Fluids

DOI

2023

Thermal management system for prismatic battery module with biomimetic cephalofoil fin and film heater

Applied Thermal Engineering

DOI

2023

Simulation and Optimization of Lithium-Ion Battery Thermal Management System Integrating Composite Phase Change Material, Flat Heat Pipe and Liquid Cooling

Batteries

DOI

2023

Performance analysis of thermal management systems for prismatic battery module with modularized liquid-cooling plate and PCM-negative Poisson's ratio structural laminboard

Energy

DOI

2022

Performance Improvement of a Novel Trapezoid Air-Cooling Battery Thermal Management System for Electric Vehicles

Sustainability，Vol. 14, No. 9

DOI

2022

基于液冷电池模组的结构优化与热蔓延抑制

《储能科学与技术》

2022

风冷电池模组热性能及成组效率的多目标优化

《储能科学与技术》

2022

车用电池模组热蔓延防护结构的数值仿真研究

《储能科学与技术》

2022

Heat generation and surrogate model for large-capacity nickel-rich prismatic lithium-ion battery as against 18650 battery

Journal of Loss Prevention in the Process Industries

DOI

2022

Thermal characteristics of refrigerant flow boiling in two mini-channel heat sinks of different aspect ratios for battery thermal management

Applied Thermal Engineering

DOI

2022

Fully coupled thermo-hydro-mechanical modeling and simulation of a fluid-saturated porous medium under local thermal non-equilibrium condition

International Journal of Heat and Mass Transfer

DOI

2022

Coupled Electrochemical-Thermal-Mechanical Modeling and Simulation of Lithium-Ion Batteries

Journal of the Electrochemical Society

DOI

2022

Surrogate models for lithium-ion battery heat generation based on orthogonal experiments by eliminating external wire connection effect

Applied Thermal Engineering

DOI

2022

A design optimization study of an air-cooling battery thermal management system for electric vehicles

Proceedings of the Institution of mechanical engineers. Part E, journal of process mechanical engineering

DOI

2022

Numerical analysis and thermal management of lithium-ion batteries under high ambient temperature and rapid discharging using composite phase change materials and counterflow liquid cooling

Applied Thermal Engineering

DOI

2022

Thermal performance of cylindrical battery module with both axial and radial thermal paths: Numerical simulation and thermal resistance network analysis

Journal of Energy Storage

DOI

2022

Numerical investigation on the thermal behavior of cylindrical lithium-ion batteries based on the electrochemical-thermal coupling model

International Journal of Heat and Mass Transfer

DOI

2021

电池模组复合液冷散热的实验研究与数值分析

《农业装备与车辆工程》

2021

基于工程教育认证的《热力学基础》课程教学目标达成度分析

《科技风》

DOI

2021

基于工程教育认证的分层次毕业设计教学模式的探索

《科技风》

DOI

2021

锂离子电池隔膜在压缩过程中的流固耦合效应

《储能科学与技术》

DOI

2021

Numerical analysis and surrogate model optimization of air-cooled battery modules using double-layer heat spreading plates

DOI

2021

Experimental and numerical approach for analyzing thermal behaviors of a prismatic hard-cased lithium-ion battery

Journal of Energy Storage

DOI

2021

Air-Side Fin Geometry of a Tube-Strip Heat Exchanger for Fuel Cell Vehicles

Automotive Innovation

DOI

2021

A review of air-cooling battery thermal management systems for electric and hybrid electric vehicles

Journal of Power Sources

DOI

2021

Experimental investigations on the performance of mini-channel evaporator refrigeration system for thermal management of power batteries

DOI

2021

A study on the transient heat generation rate of lithium-ion battery based on full matrix orthogonal experimental design with mixed levels

DOI

2021

A calibration calorimetry method to investigate the thermal characteristics of a cylindrical lithium-ion battery

International journal of thermal sciences

DOI

2021

Effect analysis on thermal profile management of a cylindrical lithium-ion battery utilizing a cellular liquid cooling jacket

DOI

2021

Lightweight liquid cooling based thermal management to a prismatic hard-cased lithium-ion battery

DOI

2021

A Novel Capacity Fade Model of Lithium-Ion Cells Considering the Influence of Stress

Journal of the Electrochemical Society

DOI

2021

Balanced structural optimization of air‐cooling battery module with single‐layer sleeved heat spreader plate

International Journal of Energy Research

DOI

2020

电池模组轴向-径向协同散热的数值分析

《工程热物理学报》

2020

校准量热法测量锂电池比热容和生热率

《汽车工程》

DOI

2020

基于热电制冷的动力电池模组散热性能研究

《储能科学与技术》

2020

点加热稳态导热系数测量方法研究

《热能动力工程》

DOI

2020

基于热电制冷的车用太阳能空调系统

《储能科学与技术》

DOI

2020

圆柱型锂离子电池详细热模型的数值仿真

《智能计算机与应用》

2020

Structural optimization of light-weight battery module based on hybrid liquid cooling with high latent heat PCM

International Journal of Heat and Mass Transfer

DOI

2020

Stress and reliability analysis for interconnects

DOI

2020

Introduction

Modeling, Analysis, Design, and Tests for Electronics Packaging beyond Moore

DOI

2020

Thermal modeling, analysis, and design

DOI

2020

Thermal characteristics of power battery module with composite phase change material and external liquid cooling

DOI

2020

Modeling, Analysis, Design, and Tests for Electronics Packaging beyond Moore: Acknowledgments

Modeling, Analysis, Design, and Tests for Electronics Packaging beyond Moore

DOI

2020

Reliability and failure analysis of encapsulated packages

DOI

2020

Microchannel Thermal Management System With Two-Phase Flow for Power Electronics Over 500 W/cm2 Heat Dissipation

IEEE transactions on power electronics

DOI

2020

System-level modeling, analysis, and design

DOI

2020

Electrical modeling and design

DOI

2020

Multi-objective optimization of a liquid cooled battery module with collaborative heat dissipation in both axial and radial directions

DOI

2020

Thermal Modeling and Design of 3D Memory Stack on Processor with Thermal Bridge Structure

International Conference on Electronic Packaging Technology

DOI

2020

Heat dissipation performance of a power battery module based on thermoelectric cooling

DOI

2020

Modeling, Analysis, Design, and Tests for Electronics Packaging beyond Moore: Preface

Modeling, Analysis, Design, and Tests for Electronics Packaging beyond Moore

DOI

2020

Thermal and mechanical tests for packages and materials

DOI

2020

Quasi steady state method to measure thermophysical parameters of cylindrical lithium ion batteries

Journal of Power Sources

DOI

2019

车用磷酸亚铁锂电池的热特性与热物性研究

《汽车工程》

DOI

2019

电动汽车锂离子电池散热技术研究

《农业装备与车辆工程》

2019

锂离子电池放电过程热特性实验研究

《上海工程技术大学学报》

2019

Thermal performance of a cylindrical battery module impregnated with PCM composite based on thermoelectric cooling

DOI

2019

Experimental investigation of thermal performance of large-sized battery module using hybrid PCM and bottom liquid cooling configuration

Applied Thermal Engineering

DOI

2019

An improved calorimetric method for characterizations of the specific heat and the heat generation rate in a prismatic lithium ion battery cell

Energy Conversion and Management

DOI

2019

Experimental evaluation of a compact two-phase cooling system for high heat flux electronic packages

Applied Thermal Engineering

DOI

2019

Numerical Analysis of Parametric Effects of Tube-Strip Heat Exchanger for Fuel Cell Vehicles

ASME 2019 6th International Conference on Micro/Nanoscale Heat and Mass Transfer

DOI

2019

Thermal analysis of conjugated cooling configurations using phase change material and liquid cooling techniques for a battery module

International Journal of Heat and Mass Transfer

DOI

2019

Experimental determination on thermal parameters of prismatic lithium ion battery cells

International Journal of Heat and Mass Transfer

DOI

2018

基于热电制冷的电池模组热特性试验研究

《热能动力工程》

2018

基于相变材料—泡沫铜—翅片复合结构的锂离子电池热特性研究

《上海工程技术大学学报》

2018

用于动力电池热管理的相变材料熔化及传热特性

《上海工程技术大学学报》

2018

DEVELOPMENT OF THERMAL MANAGEMENT SYSTEM OF BATTERY MODULE USING CONJUGATED PCM AND LIQUID COOLING TECHNIQUES

DOI

2018

Numerical analysis and experimental visualization of phase change material melting process for thermal management of cylindrical power battery

DOI

2018

Process Development and Failure Analysis for Chip-Last Panel Level Fan-out Packaging (PLP)

International Conference on Electronic Packaging Technology

DOI

2018

Compensation Method for Die Shift in Fan-Out Packaging

International Conference on Electronic Packaging Technology

DOI

2018

Transient Thermal Characterization of Junction to Case Thermal Resistance for 2.5D Packages

International Conference on Electronic Packaging Technology

DOI

2017

基于石蜡-翅片复合结构的电池热特性

《上海工程技术大学学报》

2017

Thermal analysis and characterization of electronic packages with alternative lid coatings

International Conference on Electronic Packaging Technology

DOI

2017

Experimental investigation on the thermal behavior of cylindrical battery with composite paraffin and fin structure

DOI

2017

Cross-Flow Heat Exchanger: Volume-Averaging Formulation of a Unit Cell Model and Thermal Performance Analysis

DOI

2017

Design analysis of minichannel heat sink with indented fins under impingement flow condition

International Conference on Electronic Packaging Technology

DOI

2016

Thermal evaluation of partially molded 2.5D package with pin fin heat sink cooling

International Conference on Electronic Packaging Technology

DOI

2016

Warpage simulation and experiment for panel level fan-out package

CPMT Symposium Japan

DOI

2016

Thermal and flow characteristics of device integrated metallic foam heat sinks with central impingement flow

International Conference on Electronic Packaging Technology

DOI

2016

Unit Cell Model Formulation and Thermal Performance Analysis for Cross-Flow Heat Exchanger

DOI

2016

パネルレベルファンアウトパッケージの反りシミュレーションと実験【Powered by NICT】

2016

Experimental investigation of thermal characteristics of lithium ion battery using phase change materials combined with metallic foams and fins

DOI

2016

Numerical Study of Thermal Behavior of Phase Change Material for Thermal Management of Cylindrical Power Batteries

IEEE Vehicle Power and Propulsion Conference (VPPC)

DOI

2016

Numerical analysis of phase change materials for thermal control of power battery of high power dissipations

IOP Conference Series Earth and Environmental Science

DOI

2015

Effective thermal conductivity model for TSVs with insulation layer as contact resistance

International Conference on Electronic Packaging Technology

DOI

2015

Thermal Design Analysis of 2.5-D Packages With Analytical TSV Submodels

DOI

2015

Study of Thermally Enhanced 2.5D Packages with Multi-chips Molded on Silicon Interposer

Journal of Electronic Materials

DOI

2014

Thermal modeling and characterization of SiC power module under both air cooling and liquid cooling conditions

Electronic Packaging Technology Conference

DOI

2014

Thermal Characterization of Both Bare Die and Overmolded 2.5-D Packages on Through Silicon Interposers

IEEE Transactions on Components, Packaging, and Manufacturing Technology

DOI

2014

Package-level Si-based micro-jet impingement cooling solution with multiple drainage micro-trenches

Electronic Packaging Technology Conference

DOI

2014

Development of fluxless bonding using deposited Gold-indium multi-layer composite for heterogeneous silicon micro-cooler stacking

Electronic Packaging Technology Conference

DOI

2014

Mechanical modeling and characterization of silicon micro cooler

Electronic Packaging Technology Conference

DOI

2010

A general approach in evaluating and optimizing thermoelectric coolers

DOI

2010

Analysis of thermoelectric cooler performance for high power electronic packages

DOI

2010

Thermal design considerations in system level testing of electronic devices

2010 11th International Conference on Electronic Packaging Technology & High Density Packaging

DOI

2010

Thermoelectrics enhanced air cooling limits and improvement techniques: Experimental and computational studies

2010 12th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems

DOI

2009

Thermal Analysis of Thermoelectric Coolers for Processors

DOI

2009

Analysis and modeling of liquid cooled heat sinks with alternating honeycomb structure

Electronic Packaging Technology Conference

DOI

2009

Feasibility study of nanofluid cooling techniques for microelectronic systems

Electronic Packaging Technology Conference

DOI

2008

Thermal Characterizations of Solid Thermal Interface Materials

Electronic Packaging Technology Conference

DOI

2008

Effect of integrated heat spreader on thermal performance and bump joint reliability for flip chip packages

Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems

DOI

2008

Multi-Level Approach to Thermal Modeling of Electronic Components With Numerous Fine Features

Electronic Packaging Technology Conference

DOI

2007

Air Flow Modeling and Analysis for Thermal Management in Functional Burn-In Systems

Electronic Packaging Technology Conference

DOI

2006

Development and characterization of large silicon microchannel heat sink packages for thermal management of high power microelectronics modules

Electronic Components and Technology Conference

DOI

2006

Synthesized Experiments and Analysis of Microchannel Heat Sinks in Electronics Packaging

Thermal and Thermomechanical Proceedings 10th Intersociety Conference on Phenomena in Electronics Systems, 2006. ITHERM 2006.

DOI

2005

Single-phase liquid cooled microchannel heat sink for electronic packages

DOI

2005

Assessments of Single-Phase Liquid Cooling Enhancement Techniques for Microelectronic Systems

DOI

2004

Direct liquid cooling of a stacked MCM

The Ninth Intersociety Conference on Thermal and Thermomechanical Phenomena In Electronic Systems (IEEE Cat. No.04CH37543)

DOI

2003

Cooling of a stacked multichip module - tests and validations

Electronic Packaging Technology Conference

DOI

2002

Development of thermal solutions for high performance laptop computers

ITherm 2002. Eighth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (Cat. No.02CH37258)

DOI

1997

两相闭式热虹吸管的集总参数模型研究

《中国科学技术大学学报》

2015

自然对流条件下模拟18650锂离子电池换热测试与分析

《高等教育学会工程热物理专业委员会第二十一届全国学术会议论文集——传热传质学专辑》

2015

模拟锂离子电池的相变材料传热特性研究

《高等教育学会工程热物理专业委员会第二十一届全国学术会议论文集——传热传质学专辑》

2026

State-of-Charge Estimation of Lithium-Ion Batteries Using a Transformer-Kalman Filter with UCB-Based Adaptive Noise Tuning

SSRN Electronic Journal

DOI

2025

Multi-Objective Optimization of Lithium-Ion Battery Thermal Management System Using Liquid Cooling and Pcm Based on Nsga-Ii Algorithm Optimized Artificial Neural Network

SSRN Electronic Journal

DOI

2024

Numerical Analysis of Thermal Performance and Thermal Spread Suppression of Battery Thermal Management Systems

SSRN Electronic Journal

DOI

2024

Optimization of Battery Thermal Management System Based on Genetic Algorithm and Artificial Neural Network Model Under Extreme Conditions

SSRN Electronic Journal

DOI

2023

Structural Optimization of Liquid-Cooled Battery Modules with Different Flow Configurations

Green energy and technology

DOI