王慧远

2026

新型高速挤压镁合金研究进展及展望

《金属学报》

2026

高洁净金属与合金的制备策略、性能提升机制与前景展望（英文）

Science China Materials

2026

Achieving a corrosion-resistant Mg-Ca lean alloy by solidification control to sequester parts-per-million-level Fe impurity

npj Materials Degradation

DOI

2026

Breaking the anisotropic strength-ductility barrier in WA-DED AZ31 Mg alloy via spiral oscillation-enabled microstructure control: a combined experimental and simulation study

Journal of Magnesium and Alloys

DOI

2026

Effect of low-temperature compressed gas cooling assisted WA-DED on microstructures and mechanical properties of AZ31 Mg alloy

Materials Characterization

DOI

2026

The ⟨c + a⟩ dislocation–driven ring texture enabling isotropic plasticity in magnesium alloys

International Journal of Plasticity

DOI

2026

Topological defect analysis and phase field study of disclination-assisted twin-grain boundary reactions in HCP-Ti polycrystals

International Journal of Plasticity

DOI

2025

新型低合金含量烘烤硬化镁合金研究进展及展望

《金属学报》

2025

7xxx系变形铝合金研究进展

《材料热处理学报》

2025

The inhibition mechanism of abnormal grain growth in dilute Mg-Al-Ca-Mn alloy through trace Gd addition

Journal of Magnesium and Alloys

2025

Structurally complex phase engineering enables hydrogen-tolerant Al alloys

Nature

DOI

2025

Synergistic strengthening in an Al-5Mg-2Zn-0.5Cu alloy with a multi-scale microstructure

Materials Science and Engineering A

DOI

2025

Solute cluster-mediated natural age hardening in a dilute Mg-Zn-Ca alloy

Scripta Materialia

DOI

2025

Achieving grain refinement and mechanical enhancement in WA-DED AZ31 Mg alloy via AlN particle incorporation

Journal of Alloys and Compounds

DOI

2025

Modification mechanism of Sm on the microstructure of Mg-8Al-0.3Zn alloy

Materials Science and Engineering A

DOI

2025

Atomic-scale cocoonlike interfacial segregation stabilizes the nanoprecipitates in a dilute Mg-Mn-Al-Ca-Ce alloy

Acta Materialia

DOI

2025

Tailoring microstructures and enhancing mechanical properties of Mg-Zn-Mn alloys through Ca alloying, pre-rolling and asymmetric hot rolling

Journal of Alloys and Compounds

DOI

2025

Superior strength-ductility synergy achieved in WA-DED Mg alloys by modulating precipitates through double-stage aging

Scripta Materialia

DOI

2025

Exploring the corrosion behavior of bimodal-grained structured Mg-2.5Zn-0.2Ce alloy with a high strength-ductility synergy

Corrosion Science

DOI

2025

Enhanced strength-ductility of a Mg-Al-Sn alloy by the synergy of solute segregation and nano-sized precipitates

Journal of Material Science and Technology

DOI

2025

Evaluating kinetic properties of Mg-based alloy melts via deep learning potential driven molecular dynamics simulations

Journal of Material Science and Technology

DOI

2025

An effective twin‐roll casting path omitting solution treatment to achieve high‐performance Mg sheets via Sc addition

Rare Metals

DOI

2025

Revealing microstructure–property relationships in wire‐arc DED AZ31 alloys: mechanical enhancement and corrosion behavior

Rare Metals

DOI

2025

Enhanced formability and fracture resistance of a dilute Mg alloy sheet via Zn microalloying

Journal of Alloys and Compounds

DOI

2025

Heterostructure control enabling outstanding strength-crack tolerance synergy in a dilute Mg-Al-Mn-Zn-Ce-Nd alloy

Journal of Magnesium and Alloys

DOI

2025

Superior thermal stability in a high-strength Al–Zn–Mg–Cu–Si alloy via tailored precipitation sequence

Materials Research Letters

DOI

2025

Heterogeneous nucleation-driven precipitation of densely distributed nanoscale phases in a low-alloyed magnesium alloy

Scripta Materialia

DOI

2025

Superior strength-ductility synergy of Al-Si-Cu-Mg alloys achieved by regulating solute clusters and precipitates: Experimental validation and numerical simulation

International Journal of Plasticity

DOI

2025

Enhanced plasticity mediated by disclination-assisted accommodation and twinning-induced work hardening in an elliptical-textured Mg alloy

Journal of Magnesium and Alloys

DOI

2025

A bake-hardenable Mg-Zn-Sn-Ca alloy addressing strength-corrosion trade-off via solute segregation to dislocations

Scripta Materialia

DOI

2024

电弧熔丝增材AZ31镁合金组织和力学性能

《有色金属(中英文)》

2024

低温高应变量衬板控轧高固溶Al-Mg合金高强塑性与高热稳定性机制

《金属学报》

2024

轻合金大型一体化结构部件压铸成形技术研究进展

《特种铸造及有色合金》

2024

双辊薄带连铸凝固过程中柱状晶向等轴晶转变的广义稳定性判据（英文）

Transactions of Nonferrous Metals Society of China

2024

Corrigendum to “Influence of Mg and Cu on precipitation behaviors and mechanical properties of Al-Si alloys” [Mater. Sci. Eng. A 908 (2024) 146775]

Materials Science and Engineering A

DOI

2024

Influence of Mg and Cu on precipitation behaviors and mechanical properties of Al–Si alloys

Materials Science and Engineering A

DOI

2024

An innovative strategy to prepare fine-grained Mg-Al alloys with a superior strength-ductility synergy via wire-arc directed energy deposition

Additive manufacturing

DOI

2024

Understanding the deformation behaviours of Mg alloys with dispersed non-basal grain-embedded orientation heterostructures

Acta Materialia

DOI

2024

Effects of Ca contents on microstructures and mechanical properties of friction stir processed Mg alloys

Materials Science and Engineering A

DOI

2024

Three-dimensional phase field modeling, orientation prediction and stress field analyses of twin-twin, twin-grain boundary reactions mediated by disclinations in hexagonal close-packed metals

Acta Materialia

DOI

2024

Dramatic improvement of formability in Mg-3Al-1Sn-0.5Ca-0.1Sm alloy via Mn microalloying combined with high temperature rolling

Journal of Magnesium and Alloys

DOI

2024

A review of superplastic magnesium alloys: Focusing on alloying strategy, grain structure control and deformation mechanisms

Journal of Material Science and Technology

DOI

2024

Effect of Mg/Si ratio on synergistic improvement of formability and yield strength in Al-Mg-Si-Zn alloys

Materials Characterization

DOI

2024

A theoretical and experimental study of deformation mechanism dictated by disclination-dislocation coupling in Mg alloys at different temperatures

Journal of Material Science and Technology

DOI

2024

Improving long-term thermal stability in twin-roll cast Al-Mg-Si-Cu alloys by optimizing Mg/Si ratios

Journal of Material Science and Technology

DOI

2024

Grain boundary engineering using self-organized high-index twins produced by twin-twin reactions in β-Ti alloys: A phase field study

Journal of Materials Research and Technology

DOI

2024

Prediction on the solidification behavior of AA6005 aluminum alloys produced by inclined twin-roll casting: A finite element analysis

Journal of Materials Research and Technology

DOI

2024

Excellent synergy of formability and strength of a Mg-Zn-Y-Ca-Zr alloy by tailoring segregation-assisted weak elliptical ring texture

Journal of Magnesium and Alloys

DOI

2023

Hardening effect and precipitation evolution of an isothermal aged Mg-Sm based alloy

Journal of Magnesium and Alloys

DOI

2023

Achieving remarkable enhancement of yield strength and high ductility in a fine-grained Mg-6Zn-0.2Ca alloy via rotated hard-plate rolling

Materials & Design

DOI

2023

Realizing impressive superplasticity in a low-alloyed Mg-Zn-Ca-Al-Mn alloy: The roles of grain boundary segregation and dense β-Mn particles

Journal of Magnesium and Alloys

DOI

2023

Developing high-strength and ductile Mg-Gd-Y-Zn-Zr alloy sheet via bimodal grain structure coupling with heterogeneously-distributed precipitates

Materials Research Letters

DOI

2023

The effect of high solid solution Mg contents (7–13 wt%) on the dynamic strain aging behavior of Al–Mg alloys

Materials Science and Engineering A

DOI

2023

Dynamic precipitation and deformation behaviors of a bimodal-grained WE43 alloy with enhanced mechanical properties

International Journal of Plasticity

DOI

2023

Effects of Mg/Zn ratio and pre-aging on microstructure and mechanical properties of Al–Mg–Zn–Cu alloys

Journal of Materials Research and Technology

DOI

2023

Twinning-mediated plasticity by a novel multistage twinning mode in an Mg-Al-Gd alloy

Materials Research Letters

DOI

2023

Effect of Ce, Sm and Sr micro-alloying on the microstructure, mechanical properties and anisotropy of rotated rolled Mg–4.5Al–1.5Sn–0.5Ca–0.2Mn alloy

Journal of Materials Research and Technology

DOI

2023

Recent progress in self-repairing coatings for corrosion protection on magnesium alloys and perspective of porous solids as novel carrier and barrier

Journal of Magnesium and Alloys

DOI

2023

Deformation mechanisms in a novel multiscale hetero-structured Mg alloy with high strength-ductility synergy

International Journal of Plasticity

DOI

2023

Wire arc additive manufacturing of a novel ATZM31 Mg alloy: Microstructure evolution and mechanical properties

Journal of Magnesium and Alloys

DOI

2023

Sequential transmutation of prismatic dislocations during {112¯2} twin-slip interaction in titanium

Scripta Materialia

DOI

2023

Anisotropic segregation-driven texture weakening in a dilute Mg-Al-Ca alloy during isothermal annealing

Materials Research Letters

DOI

2023

A Lie-algebra-based description of disclination densities and the quantification of partial disclinations in deformed polycrystalline metals

Acta Materialia

DOI

2023

Enhanced age-hardening of an Al–5Mg–2Zn–1Cu alloy by pre-aging combined with pre-straining

Materials Science and Engineering A

DOI

2023

A corrosion-resistant and age-hardenable Mg-Al-Mn-Ca-Ce dilute alloy with fine-grained structure processed by controlled rolling

Journal of Material Science and Technology

DOI

2023

Enhanced long-term thermal stability and mechanical properties of twin-roll cast Al–Mg–Si alloys with Mn and Cu additions

Materials Science and Engineering A

DOI

2023

Twinning-induced plasticity with multiple twinning modes and disclinations in Mg alloys

International Journal of Plasticity

DOI

2023

Deformation-induced grain rotation and grain boundary formation achieved through dislocation-disclination reactions in polycrystalline hexagonal close-packed metals

Acta Materialia

DOI

2023

Effect of Cu content on central-segregation composition and mechanical properties of Al–Mg–Si alloys produced by twin-roll casting

Materials Science and Engineering A

DOI

2023

Effects of solute redistribution during heat treatment on micro-galvanic corrosion behavior of dilute Mg-Al-Ca-Mn alloy

Corrosion Science

DOI

2023

Towards relieving center segregation in twin-roll cast Al-Mg-Si-Cu strips by controlling the thermal-mechanical process

Journal of Material Science and Technology

DOI

2022

镁合金压力下凝固技术研究进展

《当代化工研究》

2022

挤压铸造Al-Si系合金成分优化、孕育变质及其复合材料的研究进展

《特种铸造及有色合金》

DOI

2022

材料学科人才培养全过程的德才融合育人模式

《中国多媒体与网络教学学报(上旬刊)》

2022

A rolled Mg−8Al−0.5Zn−0.8Ce alloy with high strength-ductility synergy via engineering high-density low angle boundaries

Journal of Magnesium and Alloys

DOI

2022

Influences of pre-aging precipitates on static recrystallization behavior of Mg–6Al–1Zn alloy

Journal of Materials Research and Technology

DOI

2022

Effect of Al/Mn ratio on corrosion behavior of lean Mg-Zn-Ca-Al-Mn alloy processed by twin-roll casting

Corrosion Science

DOI

2022

The effect of quenching rates on microstructure and mechanical properties of an Al-Si-Cu-Mg alloy

Materials Characterization

DOI

2022

Simultaneous refinement of α-Mg grains and β-Mg17Al12 in Mg-Al based alloys via heterogeneous nucleation on Al8Mn4Sm

Journal of Magnesium and Alloys

DOI

2022

Effect of minor Ca addition on microstructure and mechanical properties of a low-alloyed Mg–Al–Zn–Sn alloy

Materials Science and Engineering A

DOI

2022

Role of alloyed Al on the microstructure and corrosion behavior of as-cast dilute Mg-2Zn-xAl-0.5Ca alloys

Corrosion Science

DOI

2022

Sc/Zr ratio-dependent mechanisms of strength evolution and microstructural thermal stability of multi-scale hetero-structured Al–Mg–Sc–Zr alloys

Journal of Material Science and Technology

DOI

2022

High strength and high ductility achieved in a heterogeneous lamella-structured magnesium alloy

Materials Research Letters

DOI

2022

Elucidation of formation and transformation mechanisms of Ca-rich Laves phase in Mg-Al-Ca-Mn alloys

Journal of Alloys and Compounds

DOI

2022

Elucidating dynamic precipitation and yield strength of rolled Mg–Al–Ca–Mn alloy

Materials Science and Engineering A

DOI

2022

Large hardening response mediated by room-temperature dynamic solute clustering behavior in a dilute Mg-Zn-Ca-Sn-Mn alloy

Acta Materialia

DOI

2022

Tailoring the microstructure and enhancing the corrosion resistance of extruded dilute Mg-0.6Al-0.5Mn-0.25Ca alloy by adding trace Ce

Corrosion Science

DOI

2022

Achieving extraordinary thermal stability of fine-grained structure in a dilute magnesium alloy

Materials Research Letters

DOI

2022

Designing a low-alloyed Mg–Al–Sn–Ca alloy with high strength and extraordinary formability by regulating fine grains and unique texture

Materials Science and Engineering A

DOI

2022

Generalized stability criterion for controlling solidification segregation upon twin-roll casting

Journal of Material Science and Technology

DOI

2022

Achieving high strength-ductility synergy through high-density coherent precipitation in twin-roll cast Al–Zn–Mg–Cu strips

Materials Science and Engineering A

DOI

2022

Effect of micro-alloyed Ce on the microstructure evolution and mechanical properties of rolled Mg–0.6Al–0.5Mn–0.2Ca alloy sheets

Journal of Materials Research and Technology

DOI

2022

Novel Mg-Al-Sn-Ca with enhanced mechanical properties and high corrosion rate via sub-rapid solidification for degradable magnesium alloy

Journal of Alloys and Compounds

DOI

2022

Alloying design and microstructural control strategies towards developing Mg alloys with enhanced ductility

Journal of Magnesium and Alloys

DOI

2022

Varied Modification Mechanisms of Sr and Sb Under Diverse Cooling Rates on Primary Mg2Si in an Al-20Mg2Si Alloy

Metallurgical and Materials Transactions B

DOI

2022

Enhanced superplasticity achieved by disclination-dislocation reactions in a fine-grained low-alloyed magnesium system

International Journal of Plasticity

DOI

2022

High-ductility AA6061 alloys produced by combination of sub-rapid solidification and Cr-alloying

Journal of Materials Research and Technology

DOI

2022

Enhanced aging precipitation behavior and mechanical properties of 6022 Al–Mg–Si alloy with Zr addition

Materials Science and Engineering A

DOI

2022

Spheroiding and refining of coarse CaMgSn phase in Mg–Al–Sn–Ca alloys for simultaneously improved strength and ductility via sub-rapid solidification and controlled rolling

Materials Science and Engineering A

DOI

2022

Rapid dislocation-mediated solute repartitioning towards strain-aging hardening in a fine-grained dilute magnesium alloy

Materials Research Letters

DOI

2021

低合金化高性能变形镁合金研究现状及展望

《金属学报》

2021

挤压铸造及热处理对Al-Si系合金组织及性能的影响进展

《特种铸造及有色合金》

DOI

2021

挤压铸造镁合金研究进展

《中国材料进展》

2021

Ordering in liquid and its heredity impact on phase transformation of Mg-Al-Ca alloys

Journal of Magnesium and Alloys

DOI

2021

High strength-ductility synergy induced by sub-rapid solidification in twin-roll cast Al–Mg–Si alloys

Journal of Materials Research and Technology

DOI

2021

Enhancing mechanical properties of twin-roll cast Al–Mg–Si–Fe alloys by regulating Fe-bearing phases and macro-segregation

Materials Science and Engineering A

DOI

2021

Enhanced strength-ductility synergy achieved through twin boundary pinning in a bake-hardened Mg–2Zn-0.5Ca alloy

Materials Science and Engineering A

DOI

2021

Prominent role of multi-scale microstructural heterogeneities on superplastic deformation of a high solid solution Al–7Mg alloy

International Journal of Plasticity

DOI

2021

Effect of trace Cr alloying on centerline segregations in sub-rapid solidified Al–Mg–Si (AA6061) alloys fabricated by twin-roll casting

Materials Science and Engineering A

DOI

2021

Synergetic modification effects on primary Mg2Si in Al-20Mg2Si alloy induced by the co-addition of beryllium and antimony

Journal of Alloys and Compounds

DOI

2021

Enhanced precipitation strengthening of Mg-Al-Sn-Ca alloy by multidirectional rolling

Materialia

DOI

2021

Fe-bearing phase formation, microstructure evolution, and mechanical properties of Al-Mg-Si-Fe alloy fabricated by the twin-roll casting process

Journal of Alloys and Compounds

DOI

2021

Enhanced ductility and strength of Mg-1Zn-1Sn-0.3Y-0.2Ca alloy achieved by novel micro-texture design

Scripta Materialia

DOI

2021

Novel corrosion-resistant behavior and mechanism of a biomimetic surface with switchable wettability on Mg alloy

Chemical Engineering Journal

DOI

2021

Development of high strength and formability Mg-6Zn-0.2Ca alloy via multi-pass warm rolling and aging treatment

Materials Science and Engineering A

DOI

2021

Pre-strain mediated fast natural aging in a dilute Mg-Zn-Ca-Sn-Mn alloy

Scripta Materialia

DOI

2021

Stabilizing a severely deformed Al–7Mg alloy with a multimodal grain structure via Mg solute segregation

Journal of Material Science and Technology

DOI

2021

Enhanced ductility of Mg–1Zn–0.2Zr alloy with dilute Ca addition achieved by activation of non-basal slip and twinning

Materials Science and Engineering A

DOI

2021

Effect of large thickness-reduction on microstructure evolution and tensile properties of Mg-9Al-1Zn alloy processed by hard-plate rolling

Journal of Material Science and Technology

DOI

2021

Designing a new Mg-Zn-Ca-Y wrought alloy with high strength and ductility synergy

Materialia

DOI

2021

A novel Mg-5Al-2Zn-2Sn alloy with high strength-ductility synergy fabricated via simple hot rolling and annealing treatment

Journal of Alloys and Compounds

DOI

2021

Effect of complex modification of Ca and Sb on the microstructure and mechanical properties of hypoeutectic Al-11Mg2Si alloy

Journal of Alloys and Compounds

DOI

2021

Tailoring bimodal grain structure of Mg-9Al-1Zn alloy for strength-ductility synergy: Co-regulating effect from coarse Al2Y and submicron Mg17Al12 particles

Journal of Magnesium and Alloys

DOI

2021

Revealing the underlying mechanism of abnormal grain growth in sub-rapid solidified Al-Mg-Si-Fe alloy

Materials Characterization

DOI

2021

Prominent role of high-volume fraction Mg17Al12 dynamic precipitations on multimodal microstructure formation and strength-ductility synergy of Mg–Al–Zn alloys processed by hard-plate rolling (HPR)

Materials Science and Engineering A

DOI

2021

Effect of Microstructures and Textures on Different Surfaces on Corrosion Behavior of an as-Extruded ATZ411 Magnesium Alloy Sheet

Acta Metallurgica Sinica (English Letters)

DOI

2021

Segregation potency at { 10 1 ¯ 2 } and { 10 1 ¯ 1 } twin boundaries in Mg with Zn and Ca co-addition: A first-principles study

Materialia

DOI

2021

Balancing the strength and ductility of Mg-6Zn-0.2Ca alloy via sub-rapid solidification combined with hard-plate rolling

Journal of Material Science and Technology

DOI

2020

高性能轧制镁合金研究进展

《精密成形工程》

2020

高性能挤压铸造铝合金研究进展

《特种铸造及有色合金》

DOI

2020

Application of non-equilibrium dendrite growth model considering thermo-kinetic correlation in twin-roll casting

Journal of Material Science and Technology

DOI

2020

Effects of Mg contents on the microstructure evolution and Fe–bearing phase selection of Al–Mg–Si–Fe alloys under sub–rapid solidification

Materialia

DOI

2020

Tailoring Mechanical Properties of Mg–Al–Zn–Sn–Mn Alloy by Multipass Equal Channel Angular Pressing

Advanced Engineering Materials

DOI

2020

Influences of the Al3Sc particle content on the evolution of bimodal grain structure and mechanical properties of Al–Mg–Sc alloys processed by hard-plate rolling

Materials Science and Engineering A

DOI

2020

Solute segregation assisted superplasticity in a low-alloyed Mg–Zn–Ca–Sn–Mn alloy

Materialia

DOI

2020

Development of low-alloyed Mg–Zn–Ca–Sn–Mn alloy with high strength-ductility synergy by sub-rapid solidification and hot rolling

Journal of Alloys and Compounds

DOI

2020

A high-performance Mg-Al-Sn-Zn-Bi alloy fabricated by combining sub-rapid solidification and hot rolling

Materials Characterization

DOI

2020

Prediction of modified morphology for primary Mg2Si induced by trace-element adsorption: A first-principles study

Materialia

DOI

2020

Relieving segregation in twin-roll cast Mg–8Al–2Sn–1Zn alloys via controlled rolling

Journal of Magnesium and Alloys

DOI

2020

Development of weak-textured and high-performance Mg–Zn–Ca alloy sheets based on Zn content optimization

Journal of Alloys and Compounds

DOI

2020

Controllable superhydrophobic surfaces with tunable adhesion on Mg alloys by a simple etching method and its corrosion inhibition performance

Chemical Engineering Journal

DOI

2020

Design of multicomponent Mg–Al–Zn–Sn–Bi alloys with refined microstructure and enhanced tensile properties

Materials Science and Engineering A

DOI

2020

Exploring the Hall-Petch relation and strengthening mechanism of bimodal-grained Mg–Al–Zn alloys

Journal of Alloys and Compounds

DOI

2020

Effect of Sb modification on microstructure and mechanical properties of hypoeutectic Al–11Mg2Si alloy

Materials Science and Engineering A

DOI

2020

A simultaneous improvement of both strength and ductility by Sn addition in as-extruded Mg-6Al-4Zn alloy

Journal of Material Science and Technology

DOI

2020

Superplastic Deformation Behavior of Rolled Mg-8Al-2Sn and Mg-8Al-1Sn-1Zn Alloys at High Temperatures

Materials

DOI

2020

Effects of Deformation Texture and Grain Size on Corrosion Behavior of Mg–3Al–1Zn Alloy Sheets

ACS Omega

DOI

2019

纳米增强体强化轻合金复合材料制备及构型设计研究进展与展望

《金属学报》

2019

Influences of pre-existing Mg17Al12 particles on static recrystallization behavior of Mg-Al-Zn alloys at different annealing temperatures

Journal of Alloys and Compounds

DOI

2019

Microstructure and mechanical properties of Al-Mg-Si alloy fabricated by a short process based on sub-rapid solidification

Journal of Material Science and Technology

DOI

2019

Enhancing Thermal Stability of Binary Al-Mg Alloys by Tailoring Grain Orientations Using a High Solute Mg Content

Metallurgical and Materials Transactions A

DOI

2019

A superplastic bimodal grain-structured Mg–9Al–1Zn alloy processed by short-process hard-plate rolling

Materialia

DOI

2019

Solute clustering and precipitation in an Al–Cu–Mg–Ag–Si model alloy

Materials Science and Engineering A

DOI

2019

Effects of Mg17Al12 second phase particles on twinning-induced recrystallization behavior in Mg‒Al‒Zn alloys during gradient hot rolling

Journal of Material Science and Technology

DOI

2019

Anti-corrosion behaviour of superwetting structured surfaces on Mg-9Al-1Zn magnesium alloy

Applied Surface Science

DOI

2018

超塑性轻合金组织稳定性的研究进展及展望

《金属学报》

2018

Microstructure and wear behaviour of Al-20Mg2Si alloy with combined Zr and Sb additions

Journal of Alloys and Compounds

DOI

2018

Achieving bimodal microstructure and enhanced tensile properties of Mg–9Al–1Zn alloy by tailoring deformation temperature during hard plate rolling (HPR)

Journal of Alloys and Compounds

DOI

2018

Corrigendum to “Development of a novel strength ductile Mg–7Al–5Zn alloy with high superplasticity processed by hard-plate rolling (HPR)” [J. Alloys Comp. 738 (2018) 246–254]

Journal of Alloys and Compounds

DOI

2018

Effect of tensile direction on mechanical properties and microstructural evolutions of rolled Mg-Al-Zn-Sn magnesium alloy sheets at room and elevated temperatures

Journal of Alloys and Compounds

DOI

2018

Effect of Sn Content on the Microstructure, Mechanical Properties and Corrosion Behavior of Biodegradable Mg–x (1, 3 and 5 wt.%) Sn–1Zn–0.5Ca Alloys

Materials

DOI

2018

Achieving dispersed fine soft Bi particles and grain refinement in a hypermonotectic Al–Bi alloy by severe plastic deformation and annealing

Scripta Materialia

DOI

2018

Microstructure and Tensile Properties of AZ61 Alloy Sheets Processed by High-Ratio Extrusion with Subsequent Direct Aging Treatment

Materials

DOI

2018

Corrosion resistance controllable of biomimetic superhydrophobic microstructured magnesium alloy by controlled adhesion

Surface and Coatings Technology

DOI

2018

Effects of ternary element additions on the generalized-stacking fault energy of Ti5Si3 in prismatic {11¯00}[0001] slip system: A first-principles study

Computational Materials Science

DOI

2018

Microstructure and tensile properties of rolled Mg-4Al-2Sn-1Zn alloy with pre-rolling deformation

Materials Science and Engineering A

DOI

2017

Development of a novel strength ductile Mg–7Al–5Zn alloy with high superplasticity processed by hard-plate rolling (HPR)

Journal of Alloys and Compounds

DOI

2017

Effects of Zn on the microstructure and tensile properties of as-extruded Mg-8Al-2Sn alloy

Materials Science and Engineering A

DOI

2017

Achieving fine grain structure and superplasticity in AZ91-0.4Sn magnesium alloy using short flow rolling process

Materials Science and Engineering A

DOI

2017

Effects of Ti, Si, Mg and Cu additions on interfacial properties and electronic structure of Al(111)/4H-SiC(0001) interface: A first-principles study

Applied Surface Science

DOI

2017

Bimodal microstructure – A feasible strategy for high-strength and ductile metallic materials

Journal of Material Science and Technology

DOI

2017

Corrosion inhibition of hydrophobic coatings fabricated by micro-arc oxidation on an extruded Mg–5Sn–1Zn alloy substrate

Journal of Alloys and Compounds

DOI

2017

High strength and ductile high solid solution Al–Mg alloy processed by a novel hard-plate rolling route

Journal of Alloys and Compounds

DOI

2017

Prominent role of a high volume fraction of Mg17Al12 particles on tensile behaviors of rolled Mg–Al–Zn alloys

Journal of Alloys and Compounds

DOI

2017

Tensile properties, texture evolutions and deformation anisotropy of as-extruded Mg-6Zn-1Zr magnesium alloy at room and elevated temperatures

Materials Science and Engineering A

DOI

2017

Simultaneously increasing the elevated-temperature tensile strength and plasticity of in situ nano-sized TiCx/Al-Cu-Mg composites

Materials Characterization

DOI

2017

Effect of a Minor Sr Modifier on the Microstructures and Mechanical Properties of 7075 T6 Al Alloys

Metals

DOI

2017

Growth of Mg 2 Si crystals shaped by {100} and {111} facets from Al–Mg–Si melts in the presence of calcium

CrystEngComm

DOI

2017

Morphology evolution of primary Mg 2 Si in Al–20Mg 2 Si–0.1Ca alloys prepared with various solidification cooling rates

CrystEngComm

DOI

2017

Refinement and modification of primary Mg 2 Si in an Al–20Mg 2 Si alloy by a combined addition of yttrium and antimony

CrystEngComm

DOI

2016

Aging Behavior of Nano-SiC/2014Al Composite Fabricated by Powder Metallurgy and Hot Extrusion Techniques

Journal of Material Science and Technology

DOI

2016

Fabrication of 2014 aluminum matrix composites reinforced with untreated and carboxyl-functionalized carbon nanotubes

Journal of Alloys and Compounds

DOI

2016

Controlling Wettability for Improved Corrosion Inhibition on Magnesium Alloy as Biomedical Implant Materials

Advanced Materials Interfaces

DOI

2016

The effect of Sb addition on microstructures and tensile properties of extruded Al–20Mg2Si–4Cu alloy

Materials Science and Engineering A

DOI

2016

Spheroidization of primary Mg2Si in Al-20Mg2Si-4.5Cu alloy modified with Ca and Sb during T6 heat treatment process

Materials Science and Engineering A

DOI

2016

One-step fabrication of biomimetic superhydrophobic surface by electrodeposition on magnesium alloy and its corrosion inhibition

Journal of Colloid and Interface Science

DOI

2016

Wear and Corrosion Behavior of Functionally Graded Nano-SiC/2014Al Composites Produced by Powder Metallurgy

Journal of Materials Engineering and Performance

DOI

2016

Effect of differential speed rolling on the room and elevated temperature tensile properties of rolled AZ31 Mg alloy sheets

Materials Characterization

DOI

2016

Effect of Pre-Oxidation Treatment of Nano-SiC Particulates on Microstructure and Mechanical Properties of SiC/Mg-8Al-1Sn Composites Fabricated by Powder Metallurgy Combined with Hot Extrusion

Materials

DOI

2016

Fabrication of Nano-SiC Particulate Reinforced Mg-8Al-1Sn Composites by Powder Metallurgy Combined with Hot Extrusion

Journal of Materials Engineering and Performance

DOI

2016

Fabrication of a 2014Al-SiC/2014Al Sandwich Structure Composite with Good Tensile Strength and Ductility

Journal of Materials Engineering and Performance

DOI

2016

Superhydrophobic and superoleophobic surface by electrodeposition on magnesium alloy substrate: Wettability and corrosion inhibition

Journal of Colloid and Interface Science

DOI

2016

Effect of Rolling Route on Microstructure and Tensile Properties of Twin-Roll Casting AZ31 Mg Alloy Sheets

Materials

DOI

2016

Wettability Control: Controlling Wettability for Improved Corrosion Inhibition on Magnesium Alloy as Biomedical Implant Materials (Adv. Mater. Interfaces 8/2016)

Advanced Materials Interfaces

DOI

2016

Influence of Li2Sb Additions on Microstructure and Mechanical Properties of Al-20Mg2Si Alloy

Materials

DOI

2016

Effects of Complex Modification by Sr–Sb on the Microstructures and Mechanical Properties of Al–18 wt % Mg2Si–4.5Cu Alloys

Materials

DOI

2016

Effects of doping atoms (Sb, Te, Sn, P and Bi) on the equilibrium shape of Mg 2 Si from first-principles calculations

CrystEngComm

DOI

2015

7075-TiB2原位铝基复合材料的腐蚀性能

《腐蚀与防护》

2015

Achieving high strength and high ductility in magnesium alloy using hard-plate rolling (HPR) process

Scientific Reports

DOI

2015

A comparison of microstructure and mechanical properties of Mg–9Al–1Zn sheets rolled from as-cast, cast-rolling and as-extruded alloys

Materials & Design

DOI

2015

A Novel Approach of Using Ground CNTs as the Carbon Source to Fabricate Uniformly Distributed Nano-Sized TiCx/2009Al Composites

Materials

DOI

2015

Effects of Ti-coating layer on the distribution of SiCP in the SiCP/2014Al composites

Materials & Design

DOI

2015

Achieving a weak basal texture in a Mg–6Al–3Sn alloy by wave-shaped die rolling

Materials & Design

DOI

2015

Microstructure evolution and tensile properties of hot rolled Mg–6Al–3Sn alloy sheet at elevated temperatures

Materials Science and Engineering A

DOI

2015

Microstructure and tensile properties of in situ synthesized nano-sized TiCx/2009Al composites

Materials & Design (1980-2015)

DOI

2015

Microstructures and mechanical properties of the Al2014 composites reinforced with bimodal sized SiC particles

Materials Science and Engineering A

DOI

2015

Effects of distributions of Al, Zn and Al+Zn atoms on the strengthening potency of Mg alloys: A first-principles calculations

Computational Materials Science

DOI

2015

Heterogeneous nucleation of Mg 2 Si on CaSb 2 nucleus in Al–Mg–Si alloys

CrystEngComm

DOI

2014

Manufacture of Nano-Sized Particle-Reinforced Metal Matrix Composites: A Review

Acta Metallurgica Sinica (English Letters)

DOI

2014

Slip-induced texture evolution of rolled Mg–6Al–3Sn alloy during uniaxial tension along rolling and transverse directions

Materials Science and Engineering A

DOI

2013

Microstructure and mechanical properties of Mg–5Sn alloy fabricated by a centrifugal casting method

Materials Letters

DOI

2013

Morphology and size control of octahedral and cubic primary Mg 2 Si in an Mg–Si system by regulating Sr contents

CrystEngComm

DOI

2013

First-principles calculations of generalized stacking fault energy in Mg alloys with Sn, Pb and Sn+Pb dopings

Materials Science and Engineering A

DOI

2013

First-principles study of generalized-stacking-fault (GSF) energy in Mg with Al and Zn alloyings

Journal of Alloys and Compounds

DOI

2013

Effects of doping atoms on the generalized stacking-fault energies of Mg alloys from first-principles calculations

Scripta Materialia

DOI

2013

Deformation mechanisms of a rolled Mg–6Al–3Sn alloy during plane strain compression

Materials Science and Engineering A

DOI

2013

Twinning and mechanical behavior of an extruded Mg–6Al–3Sn alloy with a dual basal texture

Materials Science and Engineering A

DOI

2012

Synthesis of octahedron and truncated octahedron primary Mg2Si by controlling the Sb contents

CrystEngComm

DOI

2012

Effect of c/a axial ratio on Schmid factors in hexagonal close-packed metals

Scripta Materialia

DOI

2012

Strong strain hardening ability in an as-cast Mg–3Sn–1Zn alloy

Materials Letters

DOI

2012

Influence of grain size on strain rate sensitivity in rolled Mg–3Al–3Sn alloy at room temperature

Scripta Materialia

DOI

2012

Modification of Primary Mg2Si in Mg-4Si Alloys with Antimony

Metallurgical and Materials Transactions A

DOI

2012

Analysis of effects of reactant particle size on phase transformations in the Ti–Si–Cu system using differential thermal analysis and x-ray diffraction

Journal of materials research/Pratt's guide to venture capital sources

DOI

2012

Calculation of Schmid factors in magnesium: Analysis of deformation behaviors

Scripta Materialia

DOI

2012

Heterogeneous nucleation of Mg2Si on Sr11Sb10 nucleus in Mg–x(3.5, 5 wt.%)Si–1Al alloys

Materials Chemistry and Physics

DOI

2012

Strong strain hardening ability in an as-cast Mg–3Al–3Sn alloy

Materials Chemistry and Physics

DOI

2011

Influence of grain size on deformation mechanisms in rolled Mg–3Al–3Sn alloy at room temperature

Materials Science and Engineering A

DOI

2011

First-principles study of the generalized stacking fault energy in Mg–3Al–3Sn alloy

Scripta Materialia

DOI

2010

原位镁基复合材料的研究进展

《中国材料进展》

2010

First-principles study of the structural and elastic properties of Ti5Si3 with substitutions Zr, V, Nb, and Cr

Journal of materials research/Pratt's guide to venture capital sources

DOI

2009

变质及热处理对过共晶铝硅合金组织与滑动磨损性能的影响

《金属加工(热加工)》

2009

Microstructural evolution behavior of Mg–5Si–1Al alloy modified with Sr–Sb during isothermal heat treatment

Journal of Alloys and Compounds

DOI

2009

Influences of Morphology and Size of Mg2Si on Microstructural Evolution of Mg–6.2Si Alloys during Partial Remelting

ISIJ International

DOI

2008

Influence of melt superheating on microstructures of Mg-3.5Si-1Al alloys

Transactions of Nonferrous Metals Society of China

2008

Lattice Parameter and Stoichiometry of TiC x Produced in Alloyed Ti–C Systems by Self‐Propagating High‐Temperature Synthesis

Journal of the American Ceramic Society

DOI

2008

Lattice Parameter and Stoichiometry of TiC x Produced in the Ti–C and Ni–Ti–C Systems by Self‐Propagating High‐Temperature Synthesis

Journal of the American Ceramic Society

DOI

2008

Simultaneously increasing the strength and ductility of the modified casting Al–Cu alloy

Journal of materials research/Pratt's guide to venture capital sources

DOI

2008

Influence of Al content on the microstructure and mechanical property of the (Zr2Cu)100−xAlx alloys

Journal of Alloys and Compounds

DOI

2007

Modification of primary Mg2Si in Mg-5Si alloys with Y2O3

Transactions of Nonferrous Metals Society of China

2007

Influence of the amount of KBF4 on the morphology of Mg2Si in Mg–5Si alloys

Materials Chemistry and Physics

DOI

2007

Effect of C particle size on the porous formation of TiC particulate locally reinforced steel matrix composites via the SHS reaction of Ni–Ti–C system during casting

Materials Science and Engineering A

DOI

2006

颗粒增强镁基复合材料的研究现状

《材料科学与工艺》

2006

Effect of Y2O3on microstructure and mechanical properties of hypereutectic Al-20%Si alloy

Transactions of Nonferrous Metals Society of China

2005

Fabrication of TiB2 particulate reinforced magnesium matrix composites by two-step processing method

Materials Letters

DOI

2004

原位颗粒增强镁基复合材料的制备

《吉林大学》

2021

时效析出物对新型AXM系镁合金腐蚀行为的影响

《第十一届全国腐蚀与防护大会》

DOI

2019

Preparation of superhydrophobic surface on magnesium alloys by etching method

Abstract Book of the 6th International Conference of Bionic Engineering (ICBE 2019) and International Symposium on Nature-Inspired Technology 2019 (ISNIT 2019)

DOI

2001

稀土Y对Al-Si合金焊缝组织和性能影响的研究

《第十次全国焊接会议论文集（第1册）》

2025

Tailoring Microstructures and Mechanical Properties of Cast Mg-Zn-Al-Mn Alloys Through Alloying with Cu, Sn and Y

SSRN Electronic Journal

DOI

2023

Achieving High Strength-Ductility Synergy in A Multi-Scale Heterogeneous Mg-Gd-Y-Zn-Zr Alloy by Simple Hard-Plate Rolling

SSRN Electronic Journal

DOI

2022

Developing Novel Multiscale Hetero-Structure in Mg-Alloy for High Strength-Ductility Synergy by Short-Routed Rolling

SSRN Electronic Journal

DOI

2021

Modification of Mechanical Properties and Corrosion Behaviors of Mg-Al-Sn-Ca Alloy via Tuning Eutectic Phase by Sub-Rapid Solidification

SSRN Electronic Journal

DOI

2019

Phase Selection and Morphological Evolution for a Dilute Al-Mg-Si Alloy Under Sub-Rapid Solidification

SSRN Electronic Journal

DOI