百晓学者学者目录

韩璞

华北电力大学河北省发电过程仿真与优化控制工程技术研究中心

个人简介

韩璞，华北电力大学河北省发电过程仿真与优化控制工程技术研究中心主任，研究方向为计算机软件及计算机应用、电力工业、动力工程，代表性成果包括基于光滑支持向量回归的汽轮机振动分析、火电厂热工参数软测量技术的发展和现状、一种新的单元机组负荷系统内模控制方法等。

精选作品

期刊论文

  1. Cheng Pan, Pu Han, Yuhan Ye, Zijun Pan, Xiaoyu Qin, Chuangwei He, Dao-Min Min, Kai Zhang (2026). Contribution of Temperature Gradient to Insulation Performance of Disk-Insulator at DC Voltage—Part II: Surface Flashover Properties. IEEE transactions on dielectrics and electrical insulation.DOI
  2. Pu Han, C. Pan, Yuhan Ye, Zijun Pan, Shiyi Mao, Ran Zhuo, Si-Cheng Zhao, Ju Tang (2026). Contribution of Temperature Gradient to Insulation Performance of Disk-Insulator at DC Voltage—Part I: Surface Charge Accumulation. IEEE transactions on dielectrics and electrical insulation.DOI
  3. Zijun Pan, Jiaming Cheng, Quanyou Nie, Zirui Wu, Yujie Qiu, Yuhan Ye, Shiyi Mao, Pu Han, Cheng Pan, Ju Tang (2025). A performance improving method of preparing nonlinear conductive coating for HVDC insulator based on plasma treatment technology: For lower-additive amounts and higher adhesive stability. Chemical Engineering Journal.DOI
  4. Ran Zhuo, Si-Cheng Zhao, Shiyi Mao, Cheng Pan, Zijun Pan, Pu Han (2025). The induced effect of surface charge accumulation on DC flashover: from the sight of dynamic charging evolution. 2025 6th International Conference on Electrical, Electronic Information and Communication Engineering (EEICE).DOI
  5. Ran Zhuo, Si-Cheng Zhao, Pu Han, Cheng Pan, Zijun Pan, Yuhan Ye, Shiyi Mao (2025). Charge Accumulation Characteristics on Insulator Surface Under Temperature Gradients in DC GIS. 2025 IEEE International Conference on Electrical Energy Conversion Systems and Control（IEECSC).DOI
  6. Zijun Pan, C. Pan, Bowen Tang, Pu Han, Shiyi Mao, Yujie Qiu, Ju Tang (2024). Dynamic Evolution of Surface Charge on SiC/Epoxy Coating and Its Effect on Surface Withstand Ability at DC Voltage. IEEE transactions on dielectrics and electrical insulation.DOI
  7. Shiyi Mao, Cheng Pan, Zijun Pan, Pu Han, Ran Zhuo, Di-Bo Wang (2024). Enhancement of Charge Dissipation Capacity on the Surface of Insulators Induced by the SiC/Epoxy Composite Coating with Alignment Additives. 2024 IEEE 7th International Electrical and Energy Conference (CIEEC).DOI
  8. Pu Han, C. Pan, Zijun Pan, Yuhan Ye, Yujie Qiu, Shiyi Mao, Ju Tang (2024). Effect of Insulation Distance on Surface Charge Accumulation at the Gas–Solid Interface Under DC Voltage. IEEE transactions on dielectrics and electrical insulation.DOI
  9. Shiyi Mao, Cheng Pan, Pu Han, Zijun Pan, Ran Zhuo, Di-Bo Wang (2024). SiC/Epoxy Coating with Graded Conductivity for Surface Charge Inhibition Based on Electric Field-Induced Assistant Technology. 2024 IEEE 8th Conference on Energy Internet and Energy System Integration (EI2).DOI
  10. Di-Bo Wang, Ran Zhuo, Pu Han, Cheng Pan, Zijun Pan, Shiyi Mao (2024). The Influence of Insulation Distance and Electric Field Component on Surface Charge Accumulation on Insulators. 2024 IEEE 7th International Electrical and Energy Conference (CIEEC).DOI
  11. Shiyi Mao, Zijun Pan, Yuhan Ye, Pu Han, Ju Tang, Cheng Pan (2024). Electric-field-induced assists fabrication of micro-SiC/Epoxy coating with low additive amount to improve surface insulating performance of HVDC insulator. Composites Science And Technology.DOI
  12. 张悦，韩璞，张想（2019）. 石灰石—湿法烟气脱硫吸收塔仿真模型设计与研究. 《系统仿真学报》.DOI
  13. 韩璞，刘淼，贾昊（2018）. 数据驱动预整定自适应子空间模型预测控制. 《系统仿真学报》.DOI
  14. 韩璞，刘淼，王东风，贾昊（2018）. 过热汽温系统无记忆状态反馈H∞鲁棒预测控制. 《动力工程学报》.
  15. 董泽，尹二新，韩璞（2018）. 基于迟延估计与Kalman状态跟踪的热工过程动态数据驱动建模. 《动力工程学报》.
  16. 刘淼，韩璞，张婷（2018）. 超超临界二次再热机组再热汽温系统模型辨识. 《计算机仿真》.
  17. 程海燕，韩璞，董泽，张木柳（2018）. 无人机航拍电力部件图像准确分类. 《计算机仿真》.
  18. 张妍，韩璞，王东风，王少蕊（2018）. 基于变分模态分解和LSSVM的风电场短期风速预测. 《太阳能学报》.
  19. 张悦，韩璞（2018）. 旋风分离器机理模型设计与研究. 《系统仿真学报》.DOI
  20. 韩璞，张婷（2017）. 有机朗肯循环余热利用系统的多模型预测控制. 《系统仿真学报》.DOI
  21. Pu Han, Miao Liu, Dongfeng Wang, Hao Wei Jia (2017). Design of H2/H∞ RMPC for Boiler Superheated Steam Temperature Based on Memoryless Feedback Multistep Strategy. Mathematical Problems in Engineering.DOI
  22. 刘琛，韩璞，孙明（2016）. 火电厂热工过程系统辨识方法的研究. 《计算机仿真》.
  23. 王东风，刘千，韩璞，赵文杰（2016）. 基于大数据驱动案例匹配的电站锅炉燃烧优化. 《仪器仪表学报》.
  24. 胡艳，郭钛星，韩璞（2016）. 史密斯预估PID控制算法研究及其在DCS中的实现. 《计算机仿真》.
  25. 张金营，张秋生，吕剑虹，韩璞（2016）. 超超临界二次再热机组再热汽温调节方案应用分析. 《中国电力》.
  26. 王东风，刘千，赵文杰，韩璞（2015）. 基于炉膛参数场测量的电站锅炉燃烧稳定性和经济性状态模糊综合评判. 《动力工程学报》.
  27. 韦根原，赵鹏旭，韩璞（2014）. 基于混沌粒子群算法的火电机组热工过程辨识方法. 《热力发电》.
  28. 张悦，韩璞，陈文颖（2014）. 基于信号流图的流化床锅炉风烟系统建模研究. 《动力工程学报》.
  29. 王瀛洲，韩璞（2014）. 声场强化煤粉燃烧的试验研究. 《动力工程学报》.
  30. Xiao Tiantian, Pu Han, Bo Hong, Ze Dong (2014). Research on the effect of selection of objective function on optimization results. World Congress on Intelligent Control and Automation.DOI
  31. Pu Han, Shitong Yuan, Dongfeng Wang (2014). Thermal System Identification Based on Double Quantum Particle Swarm Optimization. Communications in computer and information science.DOI
  32. 李勤道，胡志宏，郝卫东，韩璞（2013）. 135MW机组CFB锅炉再热器改造. 《热力发电》.
  33. 王东风，任燕燕，刘长良，韩璞（2013）. 基于量子遗传算法的循环流化床锅炉Hammerstein模型辨识. 《动力工程学报》.
  34. Pu Han (2013). Application of SSJS Technique in Electric Power Real-Time Production System. Jisuanji fangzhen.
  35. 高芳，翟永杰，卓越，韩璞，陆原（2012）. 基于共享最小二乘支持向量机模型的电站锅炉燃烧系统的优化. 《动力工程学报》.
  36. 王晓燕，王印松，韩璞（2012）. 工科毕业设计新模式的探索与实践——以华北电力大学自动化系为例. 《中国电力教育》.
  37. Meng Li, Dongfeng Wang, Pu Han (2012). Identification of fractional order system using Particle Swarm Optimization. International Conference on Machine Learning and Cybernetics.DOI
  38. Ren Yanyan, Wang Dongfeng, Liu Changliang, Pu Han (2012). PSO and RBF network-based Wiener model and its application to system identification. Chinese Control and Decision Conference (CCDC).DOI
  39. Yu Huang, Pu Han, Yun Zhao, Yongling Li, Dongfeng Wang (2012). Optimal load economic distribution research and engineering realization. Chinese Control and Decision Conference (CCDC).DOI
  40. Man Ding, Songming Jiao, Kun Fang Wang, Pu Han (2012). Application Effects Influenced by Credibility of Simulator Models. Applied Mechanics and Materials.DOI
  41. Pu Han, Yong-die Zhai, Yuan Lü, Fang Gao (2012). Coal ash fusion temperature model based on SVM optimized by ACO.DOI
  42. Dongfeng Wang, Pu Han (2012). Controlling Chaotic Systems Using Aggregated Linear Quadratic Regulator. PRZEGLĄD ELEKTROTECHNICZNY.
  43. 武中利，韩璞，王旭光（2011）. 基于粗大误差检测的变压器故障诊断方法. 《软件》.
  44. Dong Feng Wang, Fu Qiang Wang, Pu Han (2011). Multi-Step-Ahead Forecasting of Wind Speed Based on EMD-RBF Model. Advanced materials research.DOI
  45. Lei Meng, Ze Dong, Pu Han, Peng Li (2011). The application research of intelligent control system of 300MW CFB unit. International Conference on Artificial Intelligence, Management Science and Electronic Commerce.DOI
  46. Fang Gao, Pu Han, Yongjie Zhai, Lixia Chen (2011). Application of support vector machine and ant colony algorithm in optimization of coal ash fusion temperature. International Conference on Machine Learning and Cybernetics.DOI
  47. Yu Huang, De-Li Zhang, Yongling Li, Pu Han, Changliang Liu (2011). Economic load dispatch using a novel niche quantum genetic algorithm for units with valve-point effect. International Conference on Machine Learning and Cybernetics.DOI
  48. Yu Huang, Xiaohe Li, Yongling Li, Pu Han (2011). A new optimal PID control method for superheated steam temperature system. International Conference on Intelligent Control and Information Processing.DOI
  49. Pu Han (2011). Analysis and Controller Design of a Class of Fractional-Order System. Information and Computation.
  50. 李拥军，郑飞，黄庆勇，张悦，韩璞（2010）. 135MW循环流化床机组协调控制系统研究. 《2010年全国发电厂热工自动化专业会议》.
  51. 王东风，王晓燕，韩璞（2010）. 锅炉-汽轮机系统的分数阶控制器设计. 《中国电机工程学报》.
  52. 王子杰，黄宇，韩璞，王东风（2010）. 循环流化床锅炉汽温自抗扰控制器的优化设计. 《动力工程学报》.
  53. Chao Li, Wang Dongfeng, Ze Dong, Pu Han (2010). Controller design for networked control systems based on neural network prediction.DOI
  54. Ming Sun, Xuehou Wang, Pu Han (2010). T-S fuzzy identification for main steam temperature system using improved particle swarm optimization. World Congress on Intelligent Control and Automation.DOI
  55. Dongfeng Wang, Xiaoyan Wang, Pu Han (2010). Stability analysis for a class of fractional-order system with commensurate order. World Congress on Intelligent Control and Automation.DOI
  56. Pu Han, Meng Lei, Huang Bao-hai, Li Qin-dao (2010). The design of digital filter based on improved EMD. World Congress on Intelligent Control and Automation.DOI
  57. Wei Liao, Hua Wang, Pu Han (2010). Application of neural network combined with improved algorithm in distorted waveform analysis. Chinese Control and Decision Conference (CCDC).DOI
  58. Pu Han (2010). Design of Fractional Order Controllers for a Boiler-turbine System. Proceedings of the CSEE.
  59. Pu Han (2010). Steam turbine fault diagnosis based on KPCA and KFCM ensemble. Dianli zidonghua shebei.
  60. Ze Dong, Juanning Si, Huang Bao-hai, Pu Han (2010). Application of RBF Neural Network Based on Wavelet Packet denosing and EMD method in fault diagnosis for turbine generator. Asia-Pacific Power and Energy Engineering Conference (APPEEC).DOI
  61. Pu Han (2010). Novel Identification Methods for T-S Fuzzy Model. Jiangnan daxue xuebao. Ziran kexue ban.
  62. Pu Han (2010). Generalized predictive control using LS-SVM error compensation. Computer Engineering and Applications Journal.
  63. Pu Han, Chao Li, Ze Dong (2010). Study of networked control systems based on implicit generalized predictive control algorithm1. World Congress on Intelligent Control and Automation.DOI
  64. Wei Liao, Hua Wang, Pu Han (2010). Neural network-based detection and recognition method for power quality disturbances signal. Chinese Control and Decision Conference (CCDC).DOI
  65. 李大中，王卉，韩璞（2009）. 生物质气化焦油催化裂解脱除过程的建模与优化. 《热力发电》.
  66. 董泽，孙剑，王子杰，韩璞（2009）. 循环流化床锅炉燃烧系统中床温的模糊辨识. 《动力工程学报》.
  67. 董泽，孙剑，张媛媛，韩璞（2009）. 基于α阶逆神经网络解耦的循环流化床锅炉燃烧-汽水系统PSO-PID控制. 《动力工程学报》.
  68. 纪国瑞，董泽，韩璞，徐大平（2009）. 基于最小二乘支持向量机的风力发电机组风速软测量. 《中国电力》.
  69. Dongfeng Wang, Zijie Wang, Meng Li, Pu Han (2009). Multi-model based IMC design for steam temperature system of thermal power plant.DOI
  70. Dong Feng Wang, Qin Dao Li, Meng Li, Pu Han (2009). Combustion Optimization Based on RBF Neural Network and Multi-objective Genetic Algorithms. International Conference on Genetic and Evolutionary Computing.DOI
  71. Wei-Hua Pan, Pu Han, Lijing Zhang, Tiankun Wang (2009). Scheduling strategy based on BP neural network and fuzzy feedback in networked control system. International Conference on Machine Learning and Cybernetics.DOI
  72. Yan Li, Dongfeng Wang, Pu Han (2009). Selective ensemble using discrete differential evolution algorithm for short-term load forecasting. International Conference on Machine Learning and Cybernetics.DOI
  73. Yan Li, Dongfeng Wang, Pu Han (2009). A dynamic selective neural network ensemble method for fault diagnosis of steam turbine. International Conference on Machine Learning and Cybernetics.DOI
  74. Wei Liao, Pu Han, Wang Hua (2009). Power fault using signal analysis with complex window and pattern recognition approach. Chinese Control and Decision Conference (CCDC).DOI
  75. Pu Han, Chao Li, Ze Dong, Xiu Zheng Cui (2009). Research on mixed scheduling algorithm in industrial process networked control systems. Chinese Control and Decision Conference (CCDC).DOI
  76. Pu Han, Zijie Wang, Yu Huang (2009). The application of mixed genetic algorithm in parameter identification of circulating fluidized bed units. International Conference on Sustainable Power Generation and Supply.DOI
  77. Pu Han, Dazhong Li, Hui Wang (2009). D203 MODELING AND OPTIMIZING PARAMETERS IN THE PROCESS OF TAR REMOVAL IN BIOMASS GASIFICATION BY CATALYTIC CRACKING(Biomass-4). The Proceedings of the International Conference on Power Engineering (ICOPE).DOI
  78. Pu Han (2009). MODEL-BUILDING AND OPTIMIZATION FOR EXTRICATION PROCESS OF TAR PRODUCED IN GASIFICATION BY USING CATALYTIC CRACKING. Thermal Power Generation.
  79. Pu Han (2009). Fuzzy Identification of Bed Temperature in Combustion System for Circulating Fluidized Bed Boilers. Journal of Power Engineering.
  80. Pu Han (2009). Neural network ensemble based on KICA and KFCM. Jisuanji yingyong yanjiu.
  81. Pu Han (2009). Research of main steam temperature control system based on state variable and multi-model. Journal of North China Electric Power University.
  82. Shi JianZhong, Pu Han, Jiao SongMing, Wang DongFeng (2009). Fuzzy identification method in nonlinear system based on G-K clustering algorithm. Chinese Control and Decision Conference (CCDC).DOI
  83. Dongfeng Wang, Zijie Wang, Yu Huang, Pu Han (2009). The thermal process identification with radial basis function network based on quantum particle swarm optimization. International Conference on Sustainable Power Generation and Supply.DOI
  84. Liheng Liu, Pu Han, Dongfeng Wang (2009). A multi-agent quantum evolutionary algorithm for multi-objective problem and it's application on PID parameter tuning. International Conference on Sustainable Power Generation and Supply.DOI
  85. Wei Liao, Feng Li, Pu Han (2009). Fault Diagnosis of Turbine Based on Data-Driven. International Conference on Intelligent Computation Technology and Automation.DOI
  86. Pu Han (2009). Vibration fault diagnosis of steam turbine generating unit based on expert system. Hebei Sheng Kexueyuan xuebao.
  87. 刘建民，韩璞，开平安，刘吉臻，曹文亮（2008）. 基于动力学等价的一种通用控制器的设计. 《控制理论与应用》.
  88. 韩璞，崔秀政，周黎辉（2008）. 热工过程网络控制系统中控制和信息的综合调度. 《全国第二届信号处理与应用学术会议》.
  89. 黄宇，韩璞，李永玲（2008）. 主汽温系统模糊自适应内模控制. 《中国电机工程学报》.
  90. 崔秀政，韩璞，周黎辉，王天堃（2008）. 混合调度算法在热工过程网络控制系统中的研究. 《第二十七届中国控制会议论文集》.
  91. 张超，韩璞（2008）. 基于光滑支持向量回归的汽轮机振动分析. 《电力系统及其自动化学报》.
  92. 韩璞，张德利，韩晓娟，焦嵩鸣（2008）. 基于主成分分析法与贝叶斯网络的汽轮机故障诊断方法. 《热能动力工程》.
  93. Wei Liao, Pu Han (2008). Wavelet-based approach for detection and analysis of transient signal in distributed power system. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
  94. Songming Jiao, Li-na He, Zijie Wang, Pu Han, Lihui Zhou (2008). Main Steam Temperature System Modeling Based on PCA and Neural Networks. International Symposium on Computational Intelligence and Design.DOI
  95. Weihua Pan, Pu Han, Lijing Zhang, Tiankun Wang (2008). On Stochastic Control of Networked Control Systems Based on Hidden Markov Models. International Conference on Wireless Communications, Networking and Mobile Computing.DOI
  96. Guorui Ji, Ze Dong, Dongfeng Wang, Pu Han, Daping Xu (2008). Wind speed conformal prediction in wind farm based on algorithmic randomness theory. International Conference on Machine Learning and Cybernetics.DOI
  97. Wei Liao, Pu Han (2008). Wavelet neural network aided on-line detection and diagnosis of rotating machine fault. Chinese Control and Decision Conference (CCDC).DOI
  98. Cui Xiuzheng, Pu Han, Zhou Lihui, Wang Tiankun (2008). A mixed scheduling algorithm for thermal process network control systems. Chinese Control Conference (CCC).DOI
  99. Lihui Zhou, Tiankun Wang, Pu Han, Daping Xu (2008). Research of PFC algorithm based on grey system model in networked control system. International Conference on Machine Learning and Cybernetics.DOI
  100. Jianmin Liu, Pu Han, Pingan Kai, Jizhen Liu, Wenliang Cao (2008). The design and improvement of some typical controllers. International Conference on Machine Learning and Cybernetics.DOI
  101. Liu Jianmin, Pu Han, KAI PING-AN, Liu Jizhen, Cao Wenliang, Wang Funing (2008). The general controller design and identity analysis in classical dynamics. Chinese Control and Decision Conference (CCDC).DOI
  102. Pu Han, Hong Qiao, Yongjie Zhai, Dongfeng Wang (2008). Soft-sensing for multiple models of carbon content of fly ash based on SVM fusion theory. Chinese Control and Decision Conference (CCDC).DOI
  103. Pu Han (2008). Study on dynamic modeling method of biomass gasification on fluidized bed. Journal of North China Electric Power University.
  104. Qian Zhang, Ze Dong, Pu Han, Zhongli Wu, Fang Gao (2008). Optimization of controllers in the thermal system using initial pheromone distribution in Ant Colony Optimization. IEEE International Conference on Information Reuse and Integration (IRI).DOI
  105. Lihui Zhou, Tiankun Wang, Pu Han, Daping Xu (2008). Study and application of predictive functional control in networked control system. World Congress on Intelligent Control and Automation.DOI
  106. Pu Han (2008). Thermal Process Identification With Radial Basis Function Network Based on Quantum Genetic Algorithm. Proceedings of the CSEE.
  107. Yongjie Zhai, Hong Qiao, Haili Li, Guorui Ji, Pu Han (2008). Soft Instrument for the Flue Gas Oxygen of Power Plant Based On Improved SMO Algorithm. Joint Conference on Information Sciences (JCIS).DOI
  108. Hong Qiao, Pu Han, Wang Dong Feng (2008). Grey soft-sensing modeling of oxygen content in electric power plant flue gas based on ASMO algorithm. World Congress on Intelligent Control and Automation.DOI
  109. Pu Han (2008). Analysis of Turbine's Vibration Based on Smooth Support Vector Regression. Proceedings of the Chinese Society of Universities for Electric Power System and its Automation.
  110. Pu Han, Jianmin Liu, Pingan Kai (2008). A set of simple and effective control methods for dead time systems. IEEE International Conference on Automation and Logistics (ICAL).DOI
  111. Wang Tiankun, Daping Xu, Pu Han, Zhou Lihui (2008). Application of PFC algorithm in networked control system with long time delay. Chinese Control Conference (CCC).DOI
  112. Dongfeng Wang, Pu Han (2008). Adaptive generalized functional synchronization of chaotic systems with unknown parameters. Chinese Physics B.DOI
  113. 刘建民，韩璞，开平安，曹文亮（2007）. 一种改进的α-β-γ滤波器和PID控制器. 《动力工程学报》.
  114. 韩璞，乔弘，王东风，翟永杰（2007）. 火电厂热工参数软测量技术的发展和现状. 《仪器仪表学报》.
  115. 周倩，翟永杰，韩璞（2007）. 序列最小优化算法在电力系统短期负荷预测中的应用. 《第二十六届中国控制会议》.
  116. Chao Zhang, Pu Han, Guiji Tang, Guori Ji (2007). Simulation of Time Series Prediction Based on Smooth Support Vector Regression. Lecture notes in computer science.DOI
  117. Wei Liao, Pu Han, Wu Zhong Li (2007). Detection and localization of power quality disturbances based on wavelet network.
  118. Pu Han, Wei Liao, Wu Zhong Li (2007). Early detection for short-circuit fault in low-voltage systems based on fractal exponent wavelet analysis. International Conference on Signal Processing.
  119. Qian Zhou, Yongjie Zhai, Pu Han (2007). Sequential Minimal Optimization Algorithm Applied in Short-Term Load Forecasting. International Conference on Machine Learning and Cybernetics.DOI
  120. Tiankun Wang, Lihui Zhou, Pu Han, Qian Zhang (2007). Complete Compensation for Time Delay in Networked Control System Based on GPC and BP Neural Network. International Conference on Machine Learning and Cybernetics.DOI
  121. Pu Han (2007). Mid-term load forecasting based on EUNITE competition data. Journal of North China Electric Power University.
  122. Guorui Ji, Pu Han, Yongjie Zhai (2007). Wind Speed Forecasting Based on Support Vector Machine with Forecasting Error Estimation. International Conference on Machine Learning and Cybernetics.DOI
  123. Yang Jin-fang, Yongjie Zhai, Daping Xu, Pu Han (2007). SMO Algorithm Applied in Time Series Model Building and Forecast. International Conference on Machine Learning and Cybernetics.DOI
  124. Pu Han, Deli Zhang, Lihui Zhou, Songming Jiao (2007). Steam Turbine Fault Diagnosis Method Based on Rough Set Theory and Bayesian Network. International Conference on Fuzzy Systems and Knowledge Discovery (FSKD).DOI
  125. Pu Han, Deli Zhang (2007). Turbo-Generator Unit Vibration Fault Diagnosis Research Based on Space Optimization Algorithm of Bayesian Networks. International Conference on Machine Learning and Cybernetics.DOI
  126. 黄宇，韩璞，王东风，张婧（2006）. 基于BP神经网络整定的PID控制在过热汽温系统中的应用. 《仪器仪表学报》.
  127. 徐大平，张悦，王东风，韩璞（2006）. 遗传规划算法实现控制器的设计和优化. 《仪器仪表学报》.
  128. 周黎辉，吴治清，韩璞，毛新静（2006）. 模糊调整自适应神经网络在非线性系统中的应用. 《仪器仪表学报》.
  129. 徐大平，张悦，王东风，韩璞（2006）. 基于模糊监督器的混杂系统控制. 《仪器仪表学报》.
  130. 韩璞，焦嵩鸣，周黎辉，孙明（2006）. 基于改进粒子群算法的PID-CMAC控制器设计. 《仪器仪表学报》.
  131. 于萍，韩璞，王天堃（2006）. 一种新的单元机组负荷系统内模控制方法. 《仪器仪表学报》.
  132. 韩璞，张婧，王东风，于萍（2006）. 一种基于神经网络的执行器死区补偿方法. 《仪器仪表学报》.
  133. 王仕龙，张君，纪国瑞，韩璞（2006）. 一种基于数字信号处理的汽轮机故障诊断系统. 《中国电力》.
  134. 韩璞，于萍，王东风，马瑞（2006）. 火电厂主汽温系统扰动消除设计方法. 《中国电力》.
  135. 韩璞，王文治，翟永杰，张婧（2006）. 基于虚拟DCS的混合仿真系统设计与开发. 《华北电力大学学报(自然科学版)》.
  136. 王锋，韩璞，乔弘，刘磊（2006）. eXtremeDB数据库在DCS现场控制站中的设计与应用. 《华北电力大学学报(自然科学版)》.
  137. 韩璞，毛新静，周黎辉，孙海蓉（2006）. 基于RPROP算法的模糊系统优化. 《仪器仪表学报》.DOI
  138. 翟永杰，杨金芳，王东风，韩璞（2006）. 支持向量回归在内模控制中的应用研究. 《仪器仪表学报》.DOI
  139. 李大中，韩璞，张瑞祥（2006）. 生物质气化发电过程建模与优化. 《节能技术》.
  140. Wang Tian kun, Hui Zhou, Pu Han, Xu Da ping (2006). Co-Compensation for Transmission Delay and Packet Dropout in Networked Contrd System. Chinese Control Conference (CCC).DOI
  141. Qian Zhou, Zhai Yong Jie, Pu Han (2006). The Application of Sequential Minimal Optimization Algorithm In Short-term Load Forecasting. Chinese Control Conference (CCC).DOI
  142. Pu Han, Xinjing Mao, Songming Jiao, Hairong Sun, Lihui Zhou (2006). Adaptive Neural Network Control for Drum Water Level Based on Fuzzy Self-Tuning. International Conference on Machine Learning and Cybernetics.DOI
  143. Jinfang Yang, Dongfeng Wang, Pu Han, Daping Xu, Yongjie Zhai (2006). Dynamic Matrix Control Based on Support Vector Regressions Error Compensation. World Congress on Intelligent Control and Automation.DOI
  144. Na Wang, Songming Jiao, Dongfeng Wang, Shou-rong Qi, Pu Han (2006). Application of Fuzzy Predictive Control in Superheated Steam Temperature Control. International Conference on Machine Learning and Cybernetics.DOI
  145. Liu HongJun, Wang Na, Pu Han (2006). Research of Simplified Dynamic Matrix Control based on T-S Fuzzy Model. World Congress on Intelligent Control and Automation.DOI
  146. 翟永杰，杨金芳，徐大平，韩璞，王东风（2005）. 应用序列最小优化算法的火电厂协调系统的预测. 《动力工程学报》.
  147. 徐大平，杨金芳，翟永杰，韩璞（2005）. SVR的限定记忆在线辨识算法及其应用. 《动力工程学报》.
  148. 韩璞，王学厚，李剑波，王东风（2005）. 粒子群优化的模糊控制器设计. 《动力工程学报》.
  149. 韩璞，张君，董泽，潘笑（2005）. 汽轮机振动信号的最优小波包基消噪与检测. 《动力工程学报》.
  150. 韩璞，翟永杰，王立志，张萍（2005）. 基于虚拟DCS的激励式仿真系统分析与设计. 《华北电力大学学报(自然科学版)》.
  151. 刘丽，韩璞，王东风（2005）. 基于改进T-S模型的热工过程模糊辨识算法. 《华北电力大学学报(自然科学版)》.
  152. 付萍，韩璞（2005）. 先进控制策略在循环流化床中的应用. 《仪器仪表用户》.
  153. 韩璞，林碧华，王东风，董泽（2005）. 基于神经模糊系统的热工过程建模及预测. 《计算机仿真》.
  154. 韩璞，王东风，刘丽（2005）. CFB锅炉床温的容错测量与传感器故障诊断. 《中国电力》.
  155. 魏乐，韩璞，于希宁（2005）. 汽汽换热器系统的多变量鲁棒PID控制. 《动力工程学报》.
  156. Lihui Zhou, Pu Han, Daogang Peng, Songming Jiao (2005). The method and application of the internal model control based on online self-leaming neural network. International Conference on Control and Automation.DOI
  157. Bihua Lin, Pu Han, Lihui Zhou (2005). A new type of neural network PID control. International Conference on Control and Automation.DOI
  158. Pu Han, Dongfeng Wang, Ningling Wang, Zeng-Zhou Jia (2005). Grey fuzzy sliding mode control for uncertain systems.DOI
  159. Songming Jiao, Pu Han, Lihui Zhou, Jianbo Li (2005). Recurrent neural network applied in dynamitic process identification based on RPROP and chaos optimization coupling algorithm.DOI
  160. Pu Han (2005). Application of Advanced Control Strategy in Circulating Fluidized Bed. Electronics Instrumentation Customer.
  161. Pu Han (2005). Design of two-degree-of-freedom structure for coordinated control system based on feedback linearization. Journal of North China Electric Power University.
  162. Pu Han (2005). An On-line Identification Algorithm Based on SVR's Limited Memory and Its Application. Power engineering.
  163. Peng Guo, Pu Han (2005). The research of MAC with control constrained based on hopfield network. International Conference on Control and Automation.DOI
  164. Hai-Rong Sun, Pu Han, Song-Ming Rao (2005). A predictive control strategy based on fuzzy system.DOI
  165. Ze Dong, Pu Han, Xi-Chao Yin (2005). Simulation study on sensor fault diagnoses of the temperature of the boiler high-temperature part metal wall.DOI
  166. Hai-Rong Sun, Pu Han, Lihui Zhou (2005). A new method to construct fuzzy systems based on rule selecting.DOI
  167. Shiliang Zhou, Pu Han, Dongfeng Wang, Yuyan Liu (2005). A kind of multivariable PID design method for chaos system - using H/sub ∞/ loop shaping design procedure.DOI
  168. Pu Han, Yu Huang, Zeng-Zhou Jia, Dongfeng Wang, Yongling Li (2005). Mixed H/spl I.bar/2/H/spl I.bar//spl infin/ optimal PID control for superheated steam temperature system based on PSO optimization. International Conference on Machine Learning and Cybernetics.DOI
  169. Pu Han, Huang Bao-hai, Dongfeng Wang, Yu Huang, Yongling Li (2005). Internal model control of superheated steam temperature system using T-S fuzzy model. International Conference on Machine Learning and Cybernetics.DOI
  170. Bihua Lin, Pu Han, Lihui Zhou (2005). Methods to improve BP network. International Conference on Control and Automation.DOI
  171. Hongjun Liu, Pu Han, Wanye Yao, Yuhong Li (2005). The research of PID neural network decoupling controller and its application in unit load system.DOI
  172. Ping Yu, Pu Han, Ze Dong, Zeng-Zhou Jia (2005). Volterra basic function network based adaptive controller.DOI
  173. 刘红军，韩璞，于希宁（2004）. 基于对角递归神经网络整定的PID解耦单元机组负荷控制系统. 《动力工程学报》.
  174. 韩璞，周世梁，刘玉燕，王东风（2004）. 基于H∞环路成形和自适应神经模糊推理系统的模糊控制器设计. 《控制理论与应用》.
  175. 封官斌，韩璞（2004）. 基于QNX的DCS现场控制站软件的设计与应用. 《全国发电厂分散控制系统与厂级监控系统技术研讨会论文集》.
  176. 姚万业，李剑波，焦嵩鸣，韩璞，徐大平（2004）. 煤耗率的在线计算及误差分析. 《中国电力》.
  177. Peng Guo, Pu Han, Dongfeng Wang (2004). Modifications of mind evolutionary computation and its application in 2-DOF PID controller. World Congress on Intelligent Control and Automation.DOI
  178. Pu Han, Guoyu Wang, Dongfeng Wang (2004). On the application of predictive functional control in steam temperature systems of thermal power plant.DOI
  179. Chenggang Zhen, Pu Han, Y. Nlu (2004). Research on image processing for furnace flame and reconstruct on temperature field. Conference proceedings/Conference proceedings - IEEE International Conference on Systems, Man, and Cybernetics.DOI
  180. Qigang Guo, Dongfeng Wang, Pu Han, Ping Yu (2004). Virtual cascade PID controller with strong robustness. Conference proceedings/Conference proceedings - IEEE International Conference on Systems, Man, and Cybernetics.DOI
  181. Dongfeng Wang, Pu Han, Wei Han, Hongjun Liu (2004). Typical grey prediction control methods and simulation studies. International Conference on Machine Learning and Cybernetics.DOI
  182. Qigang Guo, Dongfeng Wang, Pu Han, Bihua Lin (2004). Multi-model GPC for steam temperature system of circulating fluidized bed boiler. International Conference on Machine Learning and Cybernetics.DOI
  183. Pu Han, Peng Guo, Dongfeng Wang (2004). The research of GPC based on Hopfield network and its application in unit load system. International Conference on Machine Learning and Cybernetics.DOI
  184. Jun Zhang, Ruixin Li, Pu Han, Dongfeng Wang, Xi-Chao Yin (2004). Wavelet packet feature extraction for vibration monitoring and fault diagnosis of turbo-generator. International Conference on Machine Learning and Cybernetics.DOI
  185. Bihua Lin, Pu Han, Dongfeng Wang, Qigang Guo (2004). Modeling and control on the separating process with air-solid fluidized bed based on ANFIS. Conference proceedings/Conference proceedings - IEEE International Conference on Systems, Man, and Cybernetics.DOI
  186. Ruixin Li, Jun Zhang, Taiyong Wang, Pu Han, Lijing Zhang (2004). TMS320 DSP based neural networks on fault diagnostic system of turbo-generator. Conference proceedings/Conference proceedings - IEEE International Conference on Systems, Man, and Cybernetics.DOI
  187. Pu Han (2004). Fuzzy Logic Self-Tuning PID Control for Superheated Steam Temperature System. Electric Power Science and Engineering.
  188. Pu Han (2004). Extended Logic Controller Based on Chaos Genetic Algorithm. Electric Power Science and Engineering.
  189. Dongfeng Wang, Pu Han, Yongjie Zhai (2004). Predictive fuzzy controller for bed temperature system of cfb boiler based on multi-sensor information fusion algorithm. World Congress on Intelligent Control and Automation.DOI
  190. Xi-Chao Yin, Pu Han, Jun Zhang, Fengqi Zhang, Ningling Wang (2004). Application of wavelet transform in signal denoising. International Conference on Machine Learning and Cybernetics.DOI
  191. Yongjie Zhai, Ruixin Li, Dongfeng Wang, Pu Han (2004). Risk function based fuzzy judge SVM algorithm and its application. Conference proceedings/Conference proceedings - IEEE International Conference on Systems, Man, and Cybernetics.DOI
  192. Ruixin Li, Dongfeng Wang, Pu Han, Jun Zhang (2004). Fault diagnosis of turbo-generator based on RBF neural networks. International Conference on Machine Learning and Cybernetics.DOI
  193. Ruixin Li, Dongfeng Wang, Pu Han, Taiyong Wang (2004). On the applications of SVD in fault diagnosis. Conference proceedings/Conference proceedings - IEEE International Conference on Systems, Man, and Cybernetics.DOI
  194. Qigang Guo, Dongfeng Wang, Pu Han, Bihua Lin (2004). Multi-model adaptive predictive control for steam temperature system of circulating fluidized bed boller. Conference proceedings/Conference proceedings - IEEE International Conference on Systems, Man, and Cybernetics.DOI
  195. Bihua Lin, Pu Han, Dongfeng Wang, Qigang Guo (2004). Control of boiler-turbine unit based on adaptive neuro-fuzzy inference system. Conference proceedings/Conference proceedings - IEEE International Conference on Systems, Man, and Cybernetics.DOI
  196. 王国玉，梅华，韩璞，王东风（2003）. 主汽温系统模糊自适应预测函数控制. 《中国电机工程学报》.
  197. 王东风，王剑东，韩璞（2003）. 一种多变量系统的内模解耦控制设计方法. 《控制工程》.
  198. 杨平，彭道刚，韩璞，于希宁（2003）. 神经网络预测控制算法及其应用. 《控制工程》.
  199. 王东风，韩璞，于朝辉（2003）. 电力系统中的混沌研究与混沌应用. 《电力科学与工程》.
  200. 甄成刚，韩璞，牛玉广（2003）. 炉膛火焰图像处理技术及温度场重构. 《动力工程学报》.
  201. 翟永杰，王东风，韩璞（2003）. 基于多类支持向量机的汽轮发电机组故障诊断. 《动力工程学报》.
  202. Yao Wanye, Pu Han, Yang Mingyu, Zhou Lihui (2003). The implementation of power plant simulator based on distributed control system.DOI
  203. Guoyu Wang, Pu Han, Dongfeng Wang, Wanye Yao (2003). Predictive functional control of integrating plant.DOI
  204. Dongfeng Wang, Pu Han, Daogang Peng (2003). Optimal for ball mill pulverizing system and its applications. International Conference on Machine Learning and Cybernetics.DOI
  205. Dongfeng Wang, Pu Han, Guoyu Wang, Huiming Lu (2003). Multi-model adaptive predictive functional control and its application. International Conference on Machine Learning and Cybernetics.DOI
  206. Dongfeng Wang, Pu Han, Na Liu, Ze Dong, Songming Jiao (2003). Modeling the circulating fluidized bed boiler using RBF-NN based on immune genetic algorithm. International Conference on Machine Learning and Cybernetics.DOI
  207. Pu Han (2003). VARIABLE ARGUMENTS PID CONTROL FOR MAIN STEAM TEMPERATURE SYSTEM BASED ON IMMUNE GENETIC OPTIMIZATION. Proceedings of the CSEE.
  208. Pu Han (2003). A Simplified Dynamic Matrix Control Algorithm and Its Application in Steam Temperature Control. Electric Power Science and Engineering.
  209. Lihui Zhou, Pu Han, Songming Jiao, Bi-Rua Lin (2003). Feedforward neural networks using RPROP algorithm and its application in system identification. International Conference on Machine Learning and Cybernetics.DOI
  210. Dongfeng Wang, Pu Han, Qing Ren (2003). Chaos optimization variable arguments PID controller, and its application to main steam pressure regulating system. International Conference on Machine Learning and Cybernetics.DOI
  211. 王剑东，王东风，韩璞（2002）. 软测量技术及其在电厂热工过程中的应用. 《电站系统工程》.
  212. 王国玉，韩璞（2002）. 预测控制及其在热工过程控制中的应用. 《电站系统工程》.
  213. 王东风，韩璞（2002）. 基于RBF神经网络的球磨机负荷软测量. 《仪器仪表学报》.DOI
  214. 甄成刚，韩璞，刘长良（2002）. DCS仿真软件的研究. 《华东理工大学学报：社会科学版》.下载原文
  215. 王国玉，韩璞，王东风，周黎辉（2002）. PFC-PID串级控制在主汽温控制系统中的应用研究. 《中国电机工程学报》.
  216. 郭鹏，韩璞，周黎辉，董泽（2002）. 基于Hopfield网络的控制有约束MAC算法在主汽压力系统中的应用研究. 《中国电机工程学报》.
  217. 王东风，韩璞，曾德良（2002）. 单元机组协调控制系统发展和现状. 《中国电力》.
  218. 王国玉，翟永杰，韩璞，赵世杰（2002）. 单神经元自适应控制在DCS中的实现研究. 《控制工程》.
  219. 王国玉，韩璞，翟永杰，赵世杰（2002）. 基于DCS的神经网络控制的工程实现. 《电站系统工程》.
  220. 董泽，韩璞，李瑞欣，张建生（2001）. 基于DCS的锅炉过热器和再热器金属诊断方法的研究. 《河北电力技术》.
  221. 李丽荣，沈春林，韩璞（2001）. 基于BP网络的热工过程模型辨识方法. 《南京航空航天大学学报(自然科学版)》.
  222. 陈鸿伟，李永华，韩璞，金保升，徐益谦（2000）. 粉煤流化床(PC-FB)燃烧的NO生成与排放控制特征. 《动力工程学报》.
  223. 韩璞，张丽静（1993）. 热工过程控制系统参数优化方法的研究. 《华北电力大学学报(自然科学版)》.
  224. 韩璞（1993）. 热工控制系统通用仿真软件设计. 《中国电力》.
  225. 韩璞，刘吉臻（1993）. CTES-1控制技术实验系统的研制及应用. 《中国电力》.
  226. 刘吉臻，韩璞（1993）. 现代过程控制技术的发展及应用. 《中国电力》.
  227. 韩璞，邢正，朱希彦，郎意安（1989）. 热工过程模型识别与实时仿真系统. 《计算机仿真》.
  228. 韩璞，郎意安，张丽静，邢正，朱希彦（1989）. 热工过程模型识别与实时仿真微机系统的总体设计. 《华北电力大学学报(自然科学版)》.

书籍章节

  1. Dong Feng Wang, Ren Yan, Chang Liang Liu, Pu Han (2013). Identification of Thermal Process Using Hammerstein Model Based on Particle Swarm Optimization Algorithm. Lecture notes in electrical engineering.DOI

研究方向

计算机软件及计算机应用电力工业动力工程

此主页由公开资料整理，尚未经学者本人认领。