百晓学者学者目录

王新洲

南京林业大学材料科学与工程学院

个人简介

王新洲,南京林业大学材料科学与工程学院副教授,博士,研究方向为木竹材材性及功能性改良、木竹材加工及复合材料界面研究、生物质包装材料材性及功能性改良;长期从事自然地理学和测绘学、林业、轻工业手工业交叉领域的研究,聚焦热处理、压缩改性、界面增强等对木竹材微纳尺度结构与力学性能的影响机制。

精选作品

期刊论文

  1. 莫琦,王军锋,李昌荣,任世奇,王新洲(2026). 节子类型对尾巨桉单板质量的影响. 《中南林业科技大学学报》.
  2. 李改换,张建,王新洲,王洪艳,张文福,陆铜华,王进,袁少飞(2026). 表芯层刨花配比对毛竹定向刨花板物理力学性能的影响. 《林业工程学报》.DOI
  3. 莫琦,王新洲,任世奇,卢翠香,王军锋,刘世男(2026). 节子类型和数量对尾巨桉胶合板物理力学性能与界面胶合的影响. 《林业工程学报》.
  4. 徐创,杨季雨,王新洲,冷魏祺,潘彪(2026). 糠醇加固饱水考古木材的效果分析. 《林业工程学报》.
  5. 朱烨,李万兆,王新洲,王军锋(2026). 水分影响密实化木材宏微观孔隙结构变化的动态可视化研究. 《林业工程学报》.DOI
  6. 刘瑜霏,陈品睿,林枫,王新洲,王志国,许斌(2026). 毛竹竹青镜面打磨工艺流程的确定及表面性能对比研究. 《林产工业》.DOI
  7. Jinghui Wang, Jinghui Wang, Junyuan Li, Siyu Li, Zijing Guo, Junfeng Wang, Junfeng Wang, Xinzhou Wang (2026). Simultaneous improvement of bonding and waterproofing performance of wood-based panels by using micro-nano paraffin emulsions. Wood Material Science and Engineering.DOI
  8. Zhaoyi Wang, Junyuan Li, Chuang Xu, Jie Zhang, Biao Pan, Chaoguang Yu, Xinzhou Wang (2025). Magnetron sputtered ZnO enhances light-aging resistance of heat-treated 'Zhongshanshan' wood. Wood Science And Technology, Vol. 600, No. 1.DOI
  9. Yihan Zhao, Xiuying Xie, Longchao Ma, Xinzhou Wang, Yanjun Li (2025). Mechanism of transverse mechanical property evolution in bamboo induced by flattening. Wood Science And Technology, Vol. 590, No. 5.DOI
  10. Junfeng Wang, Lanxin Jiang, Keying Long, Zhen Liao, Zijing Guo, Xinzhou Wang (2025). In-situ characterization of the compression failure behavior of Chinese fir wood by using micro-CT and digital volume correlation analysis. Wood Science And Technology, Vol. 590, No. 5.DOI
  11. 邱添,徐兆军,王宇轩,王军锋,王新洲(2025). 基于超声波相位差法的中密度纤维板鼓泡模拟缺陷检测. 《木材科学与技术》.
  12. 王新洲,李俊源,王清波,席靖宇,王宇轩,衡利辰,潘彪(2025). 基于注意力机制的木材交叉场纹孔特征识别方法. 《林业工程学报》.
  13. 林枫,王怡清,刘瑜霏,谭梓俊,王新洲,许斌(2025). 三种热处理工艺对毛竹竹青理化性能和材色的影响. 《林业机械与木工设备》.DOI
  14. Jiateng Chen, Kaiwen Chen, Xinzhou Wang, Yu Wang, Yanjun Li, Tiancheng Yuan (2025). Facile synthesis of Fe3O4@wood-derived porous carbon with optimized impedance matching for enhanced microwave absorption performance. Environmental Research.DOI
  15. Keying Long, Xi Pan, Weiye Lu, Miaomiao Tian, Xinzhou Wang, Jinghui Wang, Jinghui Wang, Limin Peng, Junfeng Wang, Junfeng Wang (2025). Macadamia nutshell as sustainable core material for particleboard: substitution level effects on board properties. Wood Material Science and Engineering.DOI
  16. Siyu Li, Zhaoyi Wang, Yan Wang, Jinghui Wang, Junfeng Wang, Xinzhou Wang, Junfeng Wang, Xinzhou Wang (2025). The effect of modified paraffin on the bonding performance of urea-formaldehyde adhesive. European Journal of Wood and Wood Products.DOI
  17. Mengqiang Wu, Mingjie Guan, Pulin Che, Yujia Li, Yanjun Li, Xinzhou Wang, Fei Xiao, Jiarong She (2025). Enhanced hydrophobicity, dimensional stability and anti-mildew of bamboo by slightly acidic electrolyzed water pretreatment and wax annealing. Industrial Crops and Products.DOI
  18. Zijing Guo, Jinghui Wang, Xinshun Yin, Junfeng Wang, Yanjun Duan, Xinzhou Wang (2025). Effect of anatomical features of earlywood and latewood on the multi-dimensional structure of wood bonding interphase. Construction and Building Materials.DOI
  19. Longchao Ma, Zijing Guo, Xuqin Xie, Yan Yao, Jianhua Wu, Yanjun Li, Xinzhou Wang (2025). Process optimization for mineralized flattened bamboo board: Enhancing fire performance and surface-interface properties. Construction and Building Materials.DOI
  20. Tiancheng Yuan, Haonan Ding, Yu Wang, Xinzhou Wang, Xinzhou Wang, Yanjun Li (2025). Research on the changes of cell structure and micro-mechanical properties in different parts of bamboo under saturated steam treatment. Construction and Building Materials.DOI
  21. Longchao Ma, Tao Zhang, Yihan Zhao, Tiancheng Yuan, Xinzhou Wang, Yanjun Li (2025). Crack-resistant and flame-retardant impregnated paper-decorated bamboo-wood blockboard. Wood Material Science and Engineering.DOI
  22. Xinzhou Wang, Longchao Ma, Xuqin Xie, Zhaoyang Xu, Chayanoot Kositanont, Chotiros Dokkhan, Yan Yao, Yanjun Li (2025). Manufacturing of flame-retardant flattened bamboo board via partial lignin retention and CaCO3 mineralization. International Journal of Biological Macromolecules.DOI
  23. Tiancheng Yuan, Yuan Feng, Tao Zhang, Wenkai Zhu, Yu Wang, Xinzhou Wang, Yanjun Li (2025). A clean and convenient way to utilize naturally air-dried bamboo tubes and increase their economic value. Journal of Cleaner Production.DOI
  24. Zhaojun Xu, Yuxuan Wang, Jing Zhang, Nanfeng Zhu, Xinzhou Wang (2024). A study on internal bond strength detection model based on vibration mechanics. Wood Science And Technology, Vol. 580, No. 56.DOI
  25. 王怡清,林枫,刘瑜霏,王新洲,王志国,王海燕,许斌(2024). 毛竹纤维束活性炭的制备及其对苯酚的吸附. 《林业工程学报》.
  26. 王宇轩,王晓羽,席靖宇,徐兆军,王新洲(2024). 基于压电传感技术的中密度纤维板弹性模量检测. 《林业工程学报》.
  27. 林枫,王怡清,顾燕妮,李蕊,王新洲,许斌,徐集成,徐集略(2024). 镜面竹青与檀香紫檀的表面性能对比. 《家具》.
  28. 任安捷,赵洋,王新洲,徐朝阳,於朝广,潘彪(2024). 高温热处理对中山杉木材物理力学性能的影响. 《林业工程学报》.
  29. 彭浩哲,胡守恒,王新洲,王宇,李延军(2024). 竹材自动进出料软化压力罐的设计与制造. 《林业机械与木工设备》.
  30. Yang Liu, Guang-Dong Wu, Baiheng Ma, Tao Wu, Xinzhou Wang, Qing-Hua Wu (2024). Revealing climatic and groundwater impacts on the spatiotemporal variations in vegetation coverage in marine sedimentary basins of the North China Plain, China. Scientific Reports.DOI
  31. Tao Zhang, Longchao Ma, Tiancheng Yuan, Xiaorong Liu, Youming Dong, Kaili Wang, Xinzhou Wang, Yanjun Li (2024). Trace-loaded UIO-66-NH2 for thymol encapsulation: A green approach to enhance antifungal properties of bamboo. Construction and Building Materials.DOI
  32. Gaihuan Li, Jian Zhang, Wenfu Zhang, Hongyan Wang, Tonghua Lu, Shaofei Yuan, Xinzhou Wang (2024). The effects of orientation angle of bamboo strands on the properties of bamboo oriented strand board. Journal of Building Engineering.DOI
  33. Xinzhou Wang, Xinshu Yin, Zhaoyi Wang, Tiancheng Yuan, Wanzhao Li, Shengliang He, Shijing Sun, Yanjun Li (2024). The effects of humidity on the bonding performance of glued thermally treated bamboo. Industrial Crops and Products.DOI
  34. Longchao Ma, Yihan Zhao, Tao Zhang, Tiancheng Yuan, Xinzhou Wang, Yanjun Li (2024). Functionalized flattened bamboo board: In-situ immersion assembly of flame-retardant, waterproof and anti-mold composite coatings. International Journal of Biological Macromolecules.DOI
  35. Wanzhao Li, Ye Zhang, Xinzhou Wang, Junfeng Wang (2024). Relationship between structural characteristics of growth rings and strain accumulation in thermally modified Douglas fir wood during compressive test. Wood Material Science and Engineering.DOI
  36. XU Zhao-jun, Yuxuan Wang, Tian Qiu, Xinzhou Wang, Nanfeng Zhu (2024). The Vibration Dynamic Model for Blister Detection in Medium-Density Fiberboard. Forests.DOI
  37. Xinzhou Wang, Yaqian Huang, Siyu Li, Wanzhao Li, Zhaoyang Xu, Chaoguang Yu, Junfeng Wang (2024). Improving the mechanical properties of heat-treated wood bonding interphase via plasma treatment. Industrial Crops and Products.DOI
  38. Longchao Ma, Haozhe Peng, Xinzhou Wang, Liang Chen, Shengfeng Mao, Yanjun Li (2024). Surface property enhancement of impregnated paper decorative panel by MUF-polyelectrolyte complex@Nano-Al2O3 blending. Colloids and Surfaces A Physicochemical and Engineering Aspects.DOI
  39. Longchao Ma, Tao Zhang, Yihan Zhao, Tiancheng Yuan, Xinzhou Wang, Yanjun Li (2024). Preparation of multifunctional flame-retardant and superhydrophobic composite wood by iron ions doped phytic acid-based nanosheets. Construction and Building Materials.DOI
  40. Yihan Zhao, Xiuying Xie, Xinzhou Wang, Shengfeng Mao, Yanjun Li (2024). In situ retention of lignin-rich bamboo green effectively improves the surface properties of flattened bamboo. International Journal of Biological Macromolecules.DOI
  41. Xinran Zhao, Yang Zhao, Chaoguang Yu, Xinzhou Wang, Biao Pan (2024). Effects of the combination of phenolic-resin impregnation and heat treatment on physical, mechanical and decay resistance of Taxodium hybrid “Zhongshanshan” wood. Wood Material Science and Engineering.DOI
  42. 杨季雨,毕玉金,王新洲,潘彪(2023). 中山杉应压木的物理性质与拉伸性能. 《林业工程学报》.
  43. 王新洲,潘彪,翟胜丞,冷魏祺,梅长彤,石江涛(2023). 案例教学在应用型专业课程中的实践——以木材科学与工程专业课程为例. 《科教文汇》.
  44. 席靖宇,王宇轩,衡利辰,潘彪,骆嘉言,石江涛,王新洲(2023). 基于计算机视觉的针叶材木射线特征提取方法. 《林业工程学报》.
  45. 陈冰炜,阚玉娜,翟胜丞,潘明珠,王新洲,梅长彤(2023). 韧皮纤维的层级结构及其力学行为研究进展. 《复合材料学报》.
  46. 石江涛,王新洲,冷魏祺(2023). 学科特色课课程思政建设思考与实践. 《山西建筑》.DOI
  47. Xinshun Yin, Gaihuan Li, Yan Yao, Wanzhao Li, Weiqi Leng, Xinzhou Wang (2023). The effects of moisture content on the bonding interfacial properties of glued bamboo. Colloids and Surfaces A Physicochemical and Engineering Aspects.DOI
  48. Gaihuan Li, Ying Yu, Shaofei Yuan, Wenfu Zhang, Xinzhou Wang (2023). Flame-Retardant and Smoke-Suppression Properties of Bamboo Scrimber Coated with Hexagonal Boron Nitride. Forests.DOI
  49. Yan Yao, Jingyu Xi, Junfeng Wang, Junfeng Wang, Wanzhao Li, Jiangtao Shi, Zhangqi Yang, Xinzhou Wang (2023). The effects of surface modification by using phytic acid-based hybrid complexes on the interfacial properties of heat-treated wood. Construction and Building Materials.DOI
  50. Longchao Ma, Yihan Zhao, Tao Zhang, Xinzhou Wang, Meiling Chen, Liang Chen, Yanjun Li (2023). Preparation of hydrophobic coating by phytic acid-based hybrid complexes to enhance the surface property of wood. Wood Material Science and Engineering.DOI
  51. Junfeng Wang, Kai Yang, Wanzhao Li, Xinzhou Wang, Jan Van den Bulcke, Joris Van Acker (2023). The Impact of Earlywood and Latewood on the Compressive Stress of Thermally Modified Douglas Fir. Forests.DOI
  52. Shengfeng Mao, Zhuchao Xu, Qiuyi Wang, Xin Hai Han, Xinzhou Wang, Meiling Chen, Yanjun Li (2023). Effect of Irradiation Process on Physical and Chemical Properties and Mildew Resistance of Bamboo. Forests.DOI
  53. Xinzhou Wang, Yan Yao, Xuqin Xie, Zhurun Yuan, Wanzhao Li, Tiancheng Yuan, Yaqian Huang, Yanjun Li (2023). Investigation of the microstructure, chemical structure, and bonding interfacial properties of thermal-treated bamboo. International Journal of Adhesion and Adhesives.DOI
  54. Jiayao Li, Boren Dai, Jiangtao Shi, Weiqi Leng, Xinzhou Wang, Changlei Xia, Kathirvel Brindhadevi (2023). In-situ magnetite deposited wood composites with extensive electromagnetic interference shielding performance. Environmental Research.DOI
  55. Wenqing Wang, Jiayao Li, Jiangtao Shi, Yue Jiao, Xinzhou Wang, Changlei Xia (2023). Structure and Physical Properties of Conductive Bamboo Fiber Bundle Fabricated by Magnetron Sputtering. Materials.DOI
  56. Wangwang Yu, Tiancheng Yuan, Yan Yao, Yuhe Deng, Xinzhou Wang (2023). PLA/Coffee Grounds Composite for 3D Printing and Its Properties. Forests.DOI
  57. Wangwang Yu, Xinzhou Wang, Xinshun Yin, Eleonora Ferraris, Jie Zhang (2023). The effects of thermal annealing on the performance of material extrusion 3D printed polymer parts. Materials & Design.DOI
  58. Yaqian Huang, Junfeng Wang, Xianxu Zhan, Changtong Mei, Wanzhao Li, Yuhe Deng, Xinzhou Wang (2022). Effect of plasma treatment on the surface characteristics and adhesive penetration performance of heat-treated wood. Holzforschung, Vol. 760, No. 10.DOI
  59. 吕城龙,姚艳,王军锋,席靖宇,李万兆,王新洲(2022). 异氰酸酯胶黏剂在桉木刨花板中的渗透及界面力学性能. 《木材科学与技术》.
  60. 吕城龙,尹新顺,陈磊,石江涛,许斌,王新洲(2022). 慈竹不同尺度单元对复合板材物理力学性能的影响. 《竹子学报》.
  61. 曾诗轶,王新洲,卢嘉楷,朱伟,许斌(2022). 高温饱和蒸汽处理对原竹吸湿性能的影响. 《林业机械与木工设备》.
  62. 王新洲,梁星宇,李延军(2022). 《竹地板——室外部分》(ISO 21629-2:2022)标准解读. 《世界竹藤通讯》.
  63. 娄志超,王新洲,李延军,杨锋,赵诣涵(2022). 留青展平竹地板生产工艺. 《林产工业》.
  64. Xueshan Bai, Xi-Zhao Tian, Junfeng Li, Xinzhou Wang, Yi Li, Ya-Hong Zhou (2022). Assessment of the Hydrochemical Characteristics and Formation Mechanisms of Groundwater in A Typical Alluvial-Proluvial Plain in China: An Example from Western Yongqing County. Water.DOI
  65. Yifeng Bai, Wenqing Wang, Yongyue Zhang, Xiangwei Wang, Xinzhou Wang, Jiangtao Shi (2022). Effects of Different Delignification and Drying Methods on Fiber Properties of Moso Bamboo. Polymers.DOI
  66. Tiancheng Yuan, Xinzhou Wang, Xiaorong Liu, Yanjun Li (2022). Dynamic response of arc-shaped bamboo sheets during flattening process. Industrial Crops and Products.DOI
  67. Xuqin Xie, Tiancheng Yuan, Yan Yao, Gaihuan Li, Yanjun Li, Xinzhou Wang (2022). Phytic acid-based hybrid complexes for improving the interfacial property and mildew-resistance of heat-treated bamboo. Colloids and Surfaces A Physicochemical and Engineering Aspects.DOI
  68. Xuqin Xie, Jingyu Xi, Yueping Dai, Tiancheng Yuan, Yanjun Li, Xinzhou Wang (2022). Improving Biomass-Degradation Properties and Nano-Mechanics of Moso Bamboo via a Simple Nitrogen Heat Treatment. Forests.DOI
  69. Tiancheng Yuan, Xinshun Yin, Yaqian Huang, Xiaoran Li, Xinzhou Wang, Lei Chen, Yanjun Li (2022). Hydrothermal treatment of bamboo and its effect on nano-mechanic and anti-mildew property. Journal of Cleaner Production.DOI
  70. Lu Yong, Yujin Bi, Jiangtao Shi, Xinzhou Wang, Biao Pan (2022). Response of Tracheid Structure Characteristics and Lignin Distribution of Taxodium Hybrid Zhongshanshan to External Stress. Forests.DOI
  71. Qingyang Zhang, Runmin Xu, Shanshan Wu, Xinzhou Wang, Dao Cheng, Beibei Weng, Chenxin Wang, Jianan Li, Yuxia Chen, Yong Chang Guo (2022). Novel Natural Cellulosic Fiber from Lotus Stem: Structure and Performance Characterization. Journal of Natural Fibers.DOI
  72. Xingyu Liang, Yan Yao, Xiao Xiao, Xiaorong Liu, Xinzhou Wang, Yanjun Li (2022). Pressure-Steam Heat Treatment-Enhanced Anti-Mildew Property of Arc-Shaped Bamboo Sheets. Polymers.DOI
  73. Tiancheng Yuan, Xinzhou Wang, Xiaorong Liu, Zhichao Lou, Shengfeng Mao, Yanjun Li (2022). Bamboo flattening technology ebables efficient and value-added utilization of bamboo in the manufacture of furniture and engineered composites. Composites Part B Engineering.DOI
  74. Beibei Weng, Dao Cheng, Fangcheng Yuan, Xinzhou Wang, Fuli Wang, Hao Wang, Qingyang Zhang, Kaiting Zhang, Shanshan Wu, Yuhong Gao, Jiachen Wang, Yan Lv, Zicheng Wu, Yingquan Tan, Yong Chang Guo, Yuxia Chen (2022). Study on Physicochemical Properties and Potential Applications of Chemically Treated Luffa Sponge Fibers. Journal of Natural Fibers.DOI
  75. Yaqian Huang, Ying Yu, Chi Zhang, Xinzhou Wang, Zhangqi Yang, Yong Gang Yang (2022). Investigation of the relationship between surface colour, contact angle and chemical properties of heat-treated bamboo. Wood Material Science and Engineering.DOI
  76. Xinzhou Wang, Yaqian Huang, Chenglong Lv, Junfeng Wang, Siqun Wang, Yan Yao (2022). Multi-scale investigation of the mechanical properties of Loblolly pine wood at elevated temperature. Wood Material Science and Engineering.DOI
  77. Junfeng Wang, Yan Hong Yao, Yaqian Huang, Yingjie Ma, Jingyu Xi, Xinzhou Wang, Huaguan Li, Zhangqi Yang (2022). Effects of the combination of compression and impregnation with phenolic resin on the dimensional stability in the multiscale wood structure of Chinese fir. Construction and Building Materials.DOI
  78. Tiancheng Yuan, Tao Zhang, Yaqian Huang, Yifei Wu, Xinzhou Wang, Yanjun Li (2022). Study on Bamboo Longitudinal Flattening Technology. Polymers.DOI
  79. Tiancheng Yuan, Yaqian Huang, Tao Zhang, Xinzhou Wang, Yanjun Li (2022). Change in Micro-Morphology and Micro-Mechanical Properties of Thermally Modified Moso Bamboo. Polymers.DOI
  80. Wanzhao Li, Chuhang Liu, Xinzhou Wang, Jiangtao Shi, Changtong Mei, Jan Van den Bulcke, Joris Van Acker (2022). Understanding the impact of wood type and moisture on the bonding strength of glued wood. Wood Material Science and Engineering.DOI
  81. Tiancheng Yuan, Xin Han, Yifei Wu, Shouheng Hu, Xinzhou Wang, Yanjun Li (2021). A new approach for fabricating crack-free, flattened bamboo board and the study of its macro-/micro-properties. European Journal Of Wood And Wood Products, Vol. 790, No. 6.DOI
  82. Zhichao Lou, Qiuyi Wang, Wei Sun, Yihan Zhao, Xinzhou Wang, Xiaorong Liu, Yanjun Li (2021). [Review] Bamboo flattening technique: a literature and patent review. European Journal Of Wood And Wood Products, Vol. 790, No. 5.DOI
  83. Wanzhao Li, Zheng Zhang, Xinzhou Wang, Changtong Mei, Joris Van Acker, Jan Van den Bulcke (2021). Understanding the effect of growth ring orientation on the compressive strength perpendicular to the grain of thermally treated wood. Wood Science And Technology, Vol. 55, No. 5.DOI
  84. 李万兆,章正,彭俊懿,王新洲,石江涛,梅长彤(2021). 基于X-ray CT的载荷作用下木材内部形变研究. 《北京林业大学学报》.
  85. 郑欣欣,赵雨婷,潘彪,王新洲(2021). 西加云杉木材中单宁的提取、分布及组分. 《林业工程学报》.DOI
  86. 李珈瑶,陈雪怡,石江涛,陈培培,王新洲,王卫东(2021). 中山杉单板快速漂白工艺. 《木材科学与技术》.
  87. 李茜然,赵雨婷,郑欣欣,潘彪,王新洲(2021). 西加云杉木材单宁铁变色因素及防治. 《林业工程学报》.DOI
  88. 冷魏祺,何盛,张雪峰,翟胜丞,王新洲,潘彪,石江涛(2021). 糠醇树脂改性木材机制的研究进展与思考. 《林业工程学报》.DOI
  89. 王新洲,袁朱润,黄雅茜,李延军,李永成,许斌(2021). 毛竹工艺纤维高温饱和蒸汽-机械分离及其物理力学特性. 《复合材料学报》.DOI
  90. Tiancheng Yuan, Xiaorong Liu, Youming Dong, Xinzhou Wang, Yanjun Li (2021). Determination of the Effects of Superheated Steam on Microstructure and Micromechanical Properties of Bamboo Cell Walls Using Quasi-Static Nanoindentation. Forests.DOI
  91. Tiancheng Yuan, Xinzhou Wang, Zhichao Lou, Tao Zhang, Xin Hai Han, Zhaoshun Wang, Xiaomeng Hao, Yanjun Li (2021). Comparison of the fabrication process and macro and micro properties of two types of crack-free, flatten bamboo board. Construction and Building Materials.DOI
  92. Tiancheng Yuan, Xiao Xiao, Tao Zhang, Zhurun Yuan, Xinzhou Wang, Yanjun Li (2021). Preparation of crack-free, non-notched, flattened bamboo board and its physical and mechanical properties. Industrial Crops and Products.DOI
  93. Ao’ran Tang, Yaqian Huang, Wen Zhang, Ying Yu, Yong Gang Yang, Zhurun Yuan, Xinzhou Wang (2021). Effect of the nano-titanium dioxide (nano-TiO2) coating on the photoaging properties of thermally treated bamboo. Wood Material Science and Engineering.DOI
  94. Bingwei Chen, Shengcheng Zhai, Yu’na Kan, Xiaodong Fan, Xinzhou Wang, Biao Pan, Changtong Mei, Junji Sugiyama (2021). New insights into Chinese traditional handmade paper: influence of growth age on morphology and cellulose structure of phloem fibers from Pteroceltis tatarinowii. Cellulose.DOI
  95. Tiancheng Yuan, Yaqian Huang, Xinzhou Wang, Hongzheng Liu, Aiwen Zhang, Qiuyi Wang, Yihan Zhao, He Han, Fujin Weng, Yanjun Li (2021). Characterization of the Influence of Heat Compression on Bamboo Cell Walls by Nanoindentation. Journal of Nanoelectronics and Optoelectronics.DOI
  96. Tiancheng Yuan, Tao Zhang, Xiao Xiao, Xin Hai Han, Zhaoshun Wang, Xiaomeng Hao, Xiaorong Liu, Xinzhou Wang, Xianmiao Liu, Yanjun Li (2021). Quantitative Evaluation of the Influence of Densification Process on Bamboo Cell Walls. Journal of Nanoelectronics and Optoelectronics.DOI
  97. Dong Xing, Xinzhou Wang, Siqun Wang (2021). Temperature-Dependent Creep Behavior and Quasi-Static Mechanical Properties of Heat-Treated Wood. Forests.DOI
  98. Tiancheng Yuan, Xiao Xiao, Xin-Han, Yifei Wu, Xinzhou Wang, Xianmiao Liu, Yanjun Li (2021). Multi-Scale Analysis of Changes in Crack-Free Flattened Moso Bamboo After Saturated Steam Treatment and Flattening Process. Science of Advanced Materials.DOI
  99. Tiancheng Yuan, Zhaoshun Wang, Xin Hai Han, Zhurun Yuan, Xinzhou Wang, Yanjun Li (2021). Multi-scale evaluation of the effect of saturated steam on the micromechanical properties of Moso bamboo. Holzforschung.DOI
  100. Tiancheng Yuan, Jie Liu, Shouheng Hu, Xinzhou Wang, Xianmiao Liu, Yanjun Li (2021). Multi-scale characterization of the effect of saturated steam on the macroscale properties and surface changes of moso bamboo. Materials Express.DOI
  101. Xinzhou Wang, Dali Cheng, Xianai Huang, Lulu Song, Wenli Gu, Xingyu Liang, Yanjun Li, Bin Xu (2020). Effect of high-temperature saturated steam treatment on the physical, chemical, and mechanical properties of moso bamboo. Journal Of Wood Science, Vol. 66, No. 1.DOI
  102. 袁朱润,潘彪,石江涛,李延军,陈继承,王新洲(2020). 酚醛树脂增强中山杉单板层积材物理力学性能研究. 《西南林业大学学报(自然科学)》.
  103. 朱玉慧,闻靓,张耀丽,王新洲(2020). 杨木应拉木微区结构可视化及化学成分分析. 《林业工程学报》.DOI
  104. 胡守恒,陈李璨,邵迎涛,张水珍,王新洲,李延军(2020). 中心组合设计响应面法优化毛竹竹筒车削去青工艺. 《浙江农林大学学报》.
  105. 曹钰,王新洲,李延军,沈道海,戴月萍,张水珍,章卫钢(2020). 高温油热处理对竹材淀粉含量及防霉性能的影响. 《林业工程学报》.
  106. 李延军,娄志超,姜应军,王新洲,袁天成,杨发明(2020). 弧形竹片无刻痕展平生产技术. 《林业机械与木工设备》.DOI
  107. Zhurun Yuan, Xinwu Wu, Xinzhou Wang, Xi Zhang, Tiancheng Yuan, Xianmiao Liu, Yanjun Li (2020). Effects of One-Step Hot Oil Treatment on the Physical, Mechanical, and Surface Properties of Bamboo Scrimber. Molecules.DOI
  108. Xinzhou Wang, Zhurun Yuan, Xianxu Zhan, Yongcheng Li, Maoyi Li, Liuhan Shen, Dali Cheng, Yanjun Li, Bin Xu (2020). Multi-scale characterization of the thermal – mechanically isolated bamboo fiber bundles and its potential application on engineered composites. Construction and Building Materials.DOI
  109. Xinzhou Wang, Lulu Song, Dali Cheng, Xingyu Liang, Bin Xu (2019). Effects of saturated steam pretreatment on the drying quality of moso bamboo culms. European Journal Of Wood And Wood Products, Vol. 770, No. 5.DOI
  110. 蔡绍祥,王新洲,李延军(2019). 高温水热处理对马尾松木材尺寸稳定性和材色的影响. 《西南林业大学学报(自然科学)》.
  111. 王新洲,谢序勤,王思群,李延军,梁星宇(2019). 基于纳米压痕技术的木材胶合界面力学行为. 《林业科学》.
  112. 王新洲,石江涛,张耀丽(2019). 室内设计专业“家具制造与室内装饰材料”课程教学模式研究. 《教育现代化》.DOI
  113. 谢序勤,王新洲,汪雪(2019). 纳米蒙脱土改性脲醛树脂耐久性研究. 《中国人造板》.
  114. 陈冰炜,阚玉娜,袁诚,王新洲,黄曹兴,梅长彤,翟胜丞(2019). 乙醇预处理对芦竹细胞壁的影响及荧光可视化分析. 《林业工程学报》.DOI
  115. 陈宣宗,牛帅红,姜年春,王新洲,王丽,李延军(2019). 高温水热处理对毛竹材颜色和平衡含水率的影响. 《安徽农业大学学报》.DOI
  116. 吴鸿,王新洲,杨黎(2019). 互联网+在高校教学中的应用体会. 《中国中医药现代远程教育》.
  117. Bai-Zhong Yan, Fu-Rong Yu, Xiao Xiao, Xinzhou Wang (2019). Groundwater quality evaluation using a classification model: a case study of Jilin City, China. Natural Hazards.DOI
  118. Wangwang Yu, Bin Xu, Bangrui Fan, Zhang Yaoli, Xinzhou Wang (2019). Effects of saturated steam treatment on the cell-wall mechanics and moisture sorption properties of kenaf fibers. BioResources.DOI
  119. Xinzhou Wang, Xuanzong Chen, Xuqin Xie, Zhurun Yuan, Shaoxiang Cai, Yanjun Li (2019). Effect of Phenol Formaldehyde Resin Penetration on the Quasi-Static and Dynamic Mechanics of Wood Cell Walls Using Nanoindentation. Nanomaterials.DOI
  120. Yan Qing Wu, Haiqiao Zhang, Yang Zhang, Siqun Wang, Xinzhou Wang, Xu Deliang, Xiang Liu (2019). Effects of thermal treatment on the mechanical properties of larch (Larix gmelinii) and red oak (Quercus rubra) wood cell walls via nanoindentation. BioResources.DOI
  121. Xinzhou Wang, Xuanzong Chen, Xuqin Xie, Shaoxiang Cai, Zhurun Yuan, Yanjun Li (2019). Multi-Scale Evaluation of the Effect of Phenol Formaldehyde Resin Impregnation on the Dimensional Stability and Mechanical Properties of Pinus Massoniana Lamb. Forests.DOI
  122. Wangwang Yu, Xinzhou Wang, Eleonora Ferraris, Jie Zhang (2019). Melt crystallization of PLA/Talc in fused filament fabrication. Materials & Design.DOI
  123. Yuehua Zhu, Xinzhou Wang, Yaoli Zhang, Biao Pan (2019). Cell deformation of Taxodium hybrid ‘Zhongshanshan’ wood during the drying process. BioResources.DOI
  124. Xinzhou Wang, Linguo Zhao, Yuhe Deng, Yanjun Li, Siqun Wang (2018). Effect of the penetration of isocyanates (pMDI) on the nanomechanics of wood cell wall evaluated by AFM-IR and nanoindentation (NI). Holzforschung, Vol. 720, No. 4.DOI
  125. Xinzhou Wang, Linguo Zhao, Bin Xu, Yanjun Li, Siqun Wang, Yuhe Deng (2018). Effects of accelerated aging treatment on the microstructure and mechanics of wood-resin interphase. Holzforschung, Vol. 720, No. 3.DOI
  126. 宋路路,任慧群,王新洲,马俊敏,李永成,李延军,许斌(2018). 高温饱和蒸汽处理对竹材材性的影响. 《林业工程学报》.
  127. 李延军,胡守恒,吕荣金,张爱文,刘红征,王新洲,陈李璨(2018). 高温热处理竹束制造户外重组竹材的生产技术. 《中国人造板》.
  128. 刘苍伟,苏明垒,王思群,王新洲,赵荣军,任海青,王玉荣(2018). 不同生长期毛竹材细胞壁力学性能与微纤丝角. 《林业科学》.
  129. 蔡绍祥,马茜茜,王新洲,李延军(2018). 基于洋麻纤维/聚丙烯/橡胶板的复合板材制备工艺研究. 《林产工业》.
  130. 邵迎涛,王新洲,李延军,吴一飞,许斌,章卫刚(2018). 高温饱和蒸汽软化工艺对竹展平板物理力学性能的影响. 《竹子学报》.
  131. 刘红征,王新洲,李延军,许斌,陈李璨,张乃华(2018). 竹筒无裂纹展平生产技术. 《林产工业》.
  132. Xinzhou Wang, Xuanzong Chen, Xuqin Xie, Yan Wu, Lin-Guo Zhao, Yanjun Li, Siqun Wang (2018). Effects of thermal modification on the physical, chemical and micromechanical properties of Masson pine wood (Pinus massoniana Lamb.). Holzforschung.DOI
  133. Yanjun Li, Chengjian Huang, Li Wang, Siqun Wang, Xinzhou Wang (2017). The effects of thermal treatment on the nanomechanical behavior of bamboo (Phyllostachys pubescens Mazel ex H. de Lehaie) cell walls observed by nanoindentation, XRD, and wet chemistry. Holzforschung, Vol. 710, No. 2.DOI
  134. 宋路路,高鑫,王新洲,任慧群,陈白,许斌(2017). 低场NMR技术测定竹材的纤维饱和点. 《林业工程学报》.
  135. Jie Zhang, Xinzhou Wang, Yu Wang, Yuhe Deng (2017). Numerical investigation of the influence of process conditions on the temperature variation in fused deposition modeling. Materials & Design.DOI
  136. Yu Wang, Jie Zhang, Jin Rong Wu, Xinzhou Wang, Yuhe Deng (2017). Incorporation of graphitic nano‐filler and poly(lactic acid) in fused deposition modeling. Journal of Applied Polymer Science.DOI
  137. Xinzhou Wang, Siqun Wang, Xuqin Xie, Lin-Guo Zhao, Yuhe Deng, Yanjun Li (2017). Multi-scale evaluation of the effects of nanoclay on the mechanical properties of wood/phenol formaldehyde bondlines. International Journal of Adhesion and Adhesives.DOI
  138. 何爽爽,王新洲,邓玉和,董葛平,陈明及,张建,凌隽宇,衡利辰(2016). 耐盐竹柳中密度纤维板的研究. 《中南林业科技大学学报》.
  139. 杨莹,王新洲,邓玉和,董葛平,王向歌,陈明及,张健(2016). 变色对竹柳材性及其单板层积材性能的影响. 《中南林业科技大学学报》.
  140. 范祥林,王新洲,邓玉和,蒋姗姗,CAO QUOC AN,董葛平,TRAN MINH TOI(2016). 蒙脱土改性杨木板材的工艺研究Ⅰ:浸渍改性处理工艺. 《中南林业科技大学学报》.
  141. 陈明及,吴金绒,陈骁轶,邓玉和,王新洲,何爽爽,余旺旺,张健(2016). 不同因素对竹柳枝桠材重组木性能的影响. 《浙江农林大学学报》.
  142. 王新洲(2016). 基于纳米尺度的木材胶合界面性能及改性机制研究. 《南京林业大学》.
  143. 付菁菁,何春霞,常萧楠,王新洲,熊静,刘军恒(2016). 麦秸秆/聚丙烯发泡复合材料的热稳定性与微观结构. 《复合材料学报》.
  144. 王新洲,邓玉和,王思群,余旺旺,何爽爽,张杰(2016). 有机蒙脱土改性脲醛树脂的结构与纳米力学研究. 《光谱学与光谱分析》.
  145. Xinzhou Wang, Yuhe Deng, Yanjun Li, Kevin Kjoller, Anirban Roy, Siqun Wang (2016). In situ identification of the molecular-scale interactions of phenol-formaldehyde resin and wood cell walls using infrared nanospectroscopy. RSC Advances.DOI
  146. Xinzhou Wang, Yanjun Li, Yuhe Deng, Wangwang Yu, Xuqin Xie, Siqun Wang (2016). Contributions of Basic Chemical Components to the Mechanical Behavior of Wood Fiber Cell Walls as Evaluated by Nanoindentation. BioResources.DOI
  147. Dong Xing, Jian Li, Xinzhou Wang, Siqun Wang (2016). In situ measurement of heat-treated wood cell wall at elevated temperature by nanoindentation. Industrial Crops and Products.DOI
  148. Xinzhou Wang, Yanjun Li, Siqun Wang, Wangwang Yu, Yuhe Deng (2016). Temperature-dependent mechanical properties of wood-adhesive bondline evaluated by nanoindentation. The Journal of Adhesion.DOI
  149. 何爽爽,王新洲,邓玉和,衡利辰,张健(2015). 竹柳枝丫材与小径材中密度纤维板的研究. 《林产工业》.
  150. 陈明及,吴金绒,邓玉和,侯天宇,王新洲,陈骁轶,张健(2015). 竹柳枝桠材重组木的研制. 《西南林业大学学报(自然科学)》.
  151. 何爽爽,王新洲,董葛平,邓玉和,衡利辰(2015). 大豆蛋白胶黏剂用于竹柳中密度纤维板试验. 《林业工程学报》.
  152. 王新洲,廖承斌,邓玉和,王向歌,杨莹,董葛平,范祥林,陈明及(2015). 基于数字散斑相关法的荻草胶合界面应变分布分析. 《南京林业大学学报(自然科学版)》.
  153. Yujie Meng, Xinzhou Wang, Zhenggang Wu, Siqun Wang, Timothy Mark Young (2015). Optimization of cellulose nanofibrils carbon aerogel fabrication using response surface methodology. European Polymer Journal.DOI
  154. Xinzhou Wang, Yanjun Li, Siqun Wang, Yuhe Deng, Dong Xing, Shuangshuang He (2015). Investigating the nanomechanical behavior of thermosetting polymers using high-temperature nanoindentation. European Polymer Journal.DOI
  155. Xinzhou Wang, Yuhe Deng, Siqun Wang, Chen Min, Yujie Meng, Tuonglam Pham, Yang Ying (2014). Evaluation of the effects of compression combined with heat treatment by nanoindentation (NI) of poplar cell walls. Holzforschung, Vol. 680, No. 2.DOI
  156. 范祥林,邓玉和,王新洲,TRAN MINH TOI,杨莹,王向歌,董葛平,CAO QUOC AN(2014). 利用废弃杨木水泥模板生产纤维板的研究. 《中南林业科技大学学报》.
  157. 杨莹,冯磊,邓玉和,王新洲,王向歌,董葛平,陈明及,张健,吴金绒(2014). 不同因素对耐盐竹柳单板层积材性能的影响. 《西南林业大学学报(自然科学)》.
  158. 廖承斌,邓玉和,王新洲,范祥林,杨莹,陈民及(2014). 荻草茎秆动态润湿性能及表面自由能. 《浙江农林大学学报》.
  159. PHAM Tuong Lam, 王新洲, 邓玉和, 董葛平, TRAN Minh Toi, CAO Quoc An(2014). 废弃杨木水泥模板纤维特性及纤维板的研究. 《浙江农林大学学报》.
  160. 吴金绒,邓玉和,侯天宇,王新洲,陈骁轶,张健,陈明及(2014). 竹柳枝丫材性能及重组木制造. 《浙江农林大学学报》.
  161. 董葛平,邓玉和,王新洲,吴晶,侯天宇,杨莹,范祥林,张健(2013). 竹柳材性及其刨花板制造工艺研究. 《西南林业大学学报(自然科学)》.
  162. 王新洲,邓玉和,廖承斌,陈琛,王宁生,吴晶,侯天宇(2013). 芦苇茎秆表皮特性及防水剂用量对刨花板性能的影响. 《浙江农林大学学报》.
  163. Xinzhou Wang, Yuhe Deng, Siqun Wang, Chengbin Liao, Yujie Meng, Tuonglam Pham (2013). Nanoscale Characterization of Reed Stalk Fiber Cell Walls. BioResources.DOI
  164. 陈琛,邓玉和,徐了,陈旻,王新洲(2012). 实木复合地板用压缩炭化杨木板的工艺研究. 《中国人造板》.
  165. Cheng Liao, Yuhe Deng, Xinzhou Wang, Xiang Lin Fan, Yu Tian, Ying Yang (2012). Manufacture and Mechanical Properties of Biocomposite Made of Reed and Silvergrass. Applied Mechanics and Materials.DOI
  166. Xinzhou Wang, Jing Wu, Yuhe Deng, Cheng Liao, Xiang Lin Fan, Xiang Ge Wang (2012). Elemental Analysis of Reed and Manufacture of Composites Using Mixture of Reed and Poplar. Applied Mechanics and Materials.DOI
  167. 王新洲,邓玉和,王伟,骆嘉言,陈旻,谢盛豪,王军(2010). 芦苇中(高)密度纤维板的研究. 《林产工业》.

此主页由公开资料整理,尚未经学者本人认领。