王竹仪

2026

Precursor primary particle structure governs lithiation reconstruction and single-crystal formation of ultrahigh-nickel cathodes

Journal of Materials Chemistry A

DOI

2026

Realizing low-defectivity single-crystal LiNi0.9Co0.05Mn0.05O2 cathodes via lithiation intermediate phase modulation and homogeneous lithiation facilitation

Chemical Engineering Journal

DOI

2026

Ultrathin Polymer‐Based Composite Electrolyte Compatible with 4.7 V Cathode for High‐Voltage Li‐Metal Batteries

Advanced Functional Materials

DOI

2026

Resolving the protection-kinetics trade-off in single-crystal NCM90 via a bifunctional Al2O3-BaTiO3 composite coating

Journal of Power Sources

DOI

2026

Boron-fluorine synergy for multi-pathway ion transport in ultrathin polymer electrolyte towards durable lithium metal batteries

Energy Storage Materials

DOI

2025

Functionalized CNTs Enhancing Conduction and Interfacial Stability via Multiple Mechanisms in Ni‐Rich Cathodes

Advanced Sustainable Systems

DOI

2025

Integrating robust SEI on recycled micro-sized silicon scrap for stable lithium ion battery

Chemical Engineering Journal

DOI

2025

High‐Strength Ultrathin Solid‐State Electrolyte with Ion‐Rectifying Honeycomb‐Like Skeleton for Lithium Metal Batteries Free from External Pressure

Advanced Functional Materials

DOI

2025

An ultrathin polymer-based solid-state electrolyte membrane with high conductivity for lithium metal batteries operable at -25 °C.

Journal of Colloid and Interface Science

DOI

2024

Spheroidization: The Impact of Precursor Morphology on Solid-State Lithiation Process for High-Quality Ultrahigh-Nickel Oxide Cathodes.

Angewandte Chemie

DOI

2024

An ultra-thin asymmetric solid polymer electrolyte for in-situ integrated lithium-metal battery

Chemical Engineering Journal

DOI

2024

A 3 µm‐Ultrathin Hybrid Electrolyte Membrane with Integrative Architecture for All‐Solid‐State Lithium Metal Batteries

Advanced Energy Materials

DOI

2024

Surface atomic arrangement of primary particles through pre-oxidation to enhance the performance of LiNi0.8Co0.1Mn0.1O2 cathode materials

Chemical Engineering Journal

DOI

2024

Synergetic Coupling of Hydrogen-Bond Bridge and Multielectron Redox towards Stable and Efficient Lithium Storage

Energy Storage Materials

DOI

2023

Advances of high-performance LiNi1-x-yCoxMyO2 cathode materials and their precursor particles via co-precipitation process

Particuology

DOI

2023

Synthesis of single-crystal LiNi0.8Co0.1Mn0.1O2 materials for Li-ion batteries by microfluidic technology

Chemical Engineering Journal

DOI

2023

Functional dielectric materials for high-performance solid‐state batteries

Materials Chemistry Frontiers

DOI

2023

Dynamic stable interface between CNT and nanosilicon for robust anode with large capacity and high rate performance

Energy Storage Materials

DOI

2022

A cation-dipole-reinforced elastic polymer electrolyte enabling long-cycling quasi-solid-state lithium metal batteries

Journal of Energy Chemistry

DOI

2022

A simple and rapid route for synthesizing the nanosized g‐C3N4 materials with narrow bandgap and their photocatalytic activity

Social Science Research Network

DOI

2022

Enhanced rate capability and high-voltage cycling stability of single-crystal nickel-rich cathode by surface anchoring dielectric BaTiO3.

Journal of Colloid and Interface Science

DOI

2022

Cobalt(II)‐Hexaazatriphenylene Hexacarbonitrile Coordination Compounds Based Cathode Materials with High Capacity and Long Cycle Stability

Advanced Functional Materials

DOI

2022

Enhanced Storage and Interface Structure Stability of NCM811 Cathodes for Lithium‐Ion Batteries by Hydrophobic Fluoroalkylsilanes Modification

Energy Technology

DOI

2022

Boosting the Temperature Adaptability of Lithium Metal Batteries via a Moisture/Acid‐Purified, Ion‐Diffusion Accelerated Separator

Advanced Energy Materials

DOI

2022

High‐Rate Organic Cathode Constructed by Iron‐Hexaazatrinaphthalene Tricarboxylic Acid Coordination Polymer for Li‐Ion Batteries

Advancement of science

DOI

2021

Multifunctional separators for high-performance lithium ion batteries

Journal of Power Sources

DOI

2021

Single‐Ion Conducting Soft Electrolytes for Semi‐Solid Lithium Metal Batteries Enabling Cell Fabrication and Operation under Ambient Conditions (Adv. Energy Mater. 38/2021)

Advanced Energy Materials

DOI

2021

Functional polyethylene separator with impurity entrapment and faster Li+ ions transfer for superior lithium-ion batteries.

Journal of Colloid and Interface Science

DOI

2021

Binary Network of Conductive Elastic Polymer Constraining Nanosilicon for a High-Performance Lithium-Ion Battery.

ACS Nano

DOI

2021

Evaporation and in-situ gelation induced porous hybrid film without template enhancing the performance of lithium ion battery separator.

Journal of Colloid and Interface Science

DOI

2021

Single‐Ion Conducting Soft Electrolytes for Semi‐Solid Lithium Metal Batteries Enabling Cell Fabrication and Operation under Ambient Conditions

Advanced Energy Materials

DOI

2021

Ultraviolet-cured polyethylene oxide-based composite electrolyte enabling stable cycling of lithium battery at low temperature.

Journal of Colloid and Interface Science

DOI

2020

Ionic liquids for high performance lithium metal batteries

Journal of Energy Chemistry

DOI

2020

In-situ preparation of LixSn-Li2O–LiF/reduced graphene oxide composite anode material with large capacity and high initial Coulombic efficiency

DOI

2020

Highly-ordered microstructure and well performance of LiNi0.6Mn0.2Co0.2O2 cathode material via the continuous microfluidic synthesis

DOI

2020

Construction of silica-oxygen-borate hybrid networks on Al2O3-coated polyethylene separators realizing multifunction for high-performance lithium ion batteries

DOI

2020

Nature-Derived Cellulose-Based Composite Separator for Sodium-Ion Batteries

Frontiers in Chemistry

DOI

2020

PEDOT:PSS @Molecular Sieve as Dual‐Functional Additive to Enhance Electrochemical Performance and Stability of Ni‐Rich NMC Lithium‐Ion Batteries

DOI

2020

Dual‐Scale Al 2 O 3 Particles Coating for High‐Performance Separator and Lithium Metal Anode

DOI

2020

Ionic Conductive Thermoplastic Polymer Welding Layer for Low Electrode/Solid Electrolyte Interface Resistance

DOI

2019

A simple method to enhance the lifetime of Ni-rich cathode by using low-temperature dehydratable molecular sieve as water scavenger

Journal of Power Sources

DOI

2019

Challenges and development of composite solid-state electrolytes for high-performance lithium ion batteries

Journal of Power Sources

DOI

2019

Electrodeposited AgAu nanoalloy enhancing photoelectric conversion efficiency of dye sensitized solar cells

Electrochimica Acta

DOI

2019

Surface activated polyethylene separator promoting Li+ ion transport in gel polymer electrolytes and cycling stability of Li-metal anode

Chemical Engineering Journal

DOI

2019

Gel Polymer Electrolyte with High Li+ Transference Number Enhancing the Cycling Stability of Lithium Anodes.

ACS Applied Materials and Interfaces

DOI

2019

Nanocoating inside porous PE separator enables enhanced ionic transport of GPE and stable cycling of Li-metal anode

Research on chemical intermediates (Print)

DOI

2019

Enhanced thermal stability and lithium ion conductivity of polyethylene separator by coating colloidal SiO2 nanoparticles with porous shell.

Journal of Colloid and Interface Science

DOI

2018

UV curable organic-inorganic hybrid coatings on microporous polyethylene separator for enhancing mechanical and electrochemical performance

DOI

2018

High-Performance Dye-Sensitized Solar Cells Based on Colloid-Solution Deposition Planarized Fluorine-Doped Tin Oxide Substrates.

ACS Applied Materials and Interfaces

DOI

2018

High Li+ Ionic Flux Separator Enhancing Cycling Stability of Lithium Metal Anode

DOI

2018

Polyethylene separators modified by ultrathin hybrid films enhancing lithium ion transport performance and Li-metal anode stability

DOI

2018

In situ constructed Ag/C conductive network enhancing the C-rate performance of Si based anode

Journal of Energy Storage

DOI

2018

Synthesis of anatase/brookite TiO2–Bi2WO6 multiheterojunction and its photocatalytic properties under visible-light irradiation

Research on chemical intermediates (Print)

DOI

2017

In Situ Synthesis of Tungsten-Doped SnO2 and Graphene Nanocomposites for High-Performance Anode Materials of Lithium-Ion Batteries.

ACS Applied Materials and Interfaces

DOI

2017

Fabrication of Ti-doped SnO2/RGO composites as anode materials with high stability for lithium-ion batteries

Research on chemical intermediates (Print)

DOI

2017

Li金属電池用Li~+イオンの輸率とイオン伝導率を改善するハイブリッド被覆により活性化されたポリエチレン分離器【Powered by NICT】

2017

Fence Constructed at a Semiconductor/Electrolyte Interface Improving the Electron Collection Efficiency of the Photoelectrode for a Dye-Sensitized Solar Cell.

ACS Applied Materials and Interfaces

DOI

2017

Solvothermal Synthesis of TiO2/Bi2WO6 Heterojunction Photocatalyst with Optimized Interface Structure and Enabled Photocatalytic Performance

DOI

2017

Polyethylene separator activated by hybrid coating improving Li+ ion transference number and ionic conductivity for Li-metal battery

DOI

2016

Porous cellulose diacetate-SiO2 composite coating on polyethylene separator for high-performance lithium-ion battery.

Carbohydrate Polymers

DOI

2016

Excellent rate capability and cycle life of Li metal batteries with ZrO2/POSS multilayer-assembled PE separators

DOI

2016

Surface modified MXene Ti 3 C 2 multilayers by aryl diazonium salts leading to large-scale delamination

DOI

2016

Lanthanide complex-functionalized polyhedral oligomeric silsesquioxane with multicolor emission covered from 450 nm to 1700 nm

DOI

2016

Water-Based Organic–Inorganic Hybrid Coating for a High-Performance Separator

DOI

2016

高性能リチウムイオン電池用ポリエチレンセパレータの多孔質セルロースジアセテートSiO_2複合皮膜【Powered by NICT】

2016

Valence Band Edge Shifts and Charge-transfer Dynamics in Li-Doped NiO Based p-type DSSCs

DOI

2016

Enhancement of power conversion efficiency of dye sensitized solar cells by modifying mesoporous TiO2 photoanode with Al-doped TiO2 layer

DOI

2016

Optical band structure and photogenerated carriers transfer dynamics in FTO/TiO2 heterojunction photocatalysts

DOI

2016

Synthesis of triphasic, biphasic, and monophasic TiO2 nanocrystals and their photocatalytic degradation mechanisms

Research on chemical intermediates (Print)

DOI

2015

Effects of acetyl acetone-typed co-adsorbents on the interface charge recombination in dye-sensitized solar cell photoanodes

DOI

2015

The effect of Ni(CH3COO)2 post-treatment on the charge dynamics in p-type NiO dye-sensitized solar cells

Journal of Materials Science

DOI

2015

Fluorine-Doped Tin Oxide Nanocrystal/Reduced Graphene Oxide Composites as Lithium Ion Battery Anode Material with High Capacity and Cycling Stability.

ACS Applied Materials and Interfaces

DOI

2015

Organic-inorganic hybrid coating material for polyolefin membrane of lithium ion battery

2015

Layer-by-Layer Deposition of Organic-Inorganic Hybrid Multilayer on Microporous Polyethylene Separator to Enhance the Electrochemical Performance of Lithium-Ion Battery.

ACS Applied Materials and Interfaces

DOI

2015

Self-assembly of PEI/SiO2 on polyethylene separators for Li-ion batteries with enhanced rate capability.

ACS Applied Materials and Interfaces

DOI

2015

Influence of interface properties on charge density, band edge shifts and kinetics of the photoelectrochemical process in p-type NiO photocathodes

DOI

2014

TiO2纳米颗粒/纳米棒阵列复合薄膜的制备及其光电催化性能

《功能材料》

2014

ZrO2/聚苯乙烯磺酸钠复合湿敏元件的性能研究

《电子元件与材料》

2014

Graphene anchored with ZrO2 nanoparticles as anodes of lithium ion batteries with enhanced electrochemical performance

DOI

2014

Modification method of photo-anode of dye-sensitized solar cell

2014

High electro-catalytic counter electrode based on three-dimensional conductive grid for dye-sensitized solar cell

DOI

2014

Tuning the morphology, stability and photocatalytic activity of TiO2 nanocrystal colloids by tungsten doping

DOI

2013

Influence of defect density on the ZnO nanostructures of dye-sensitized solar cells

DOI

2013

Graphene and graphene - Preparation composite oxide

2013

Hydrothermal synthesis and humidity sensing properties of size-controlled Zirconium Oxide (ZrO2) nanorods.

Journal of Colloid and Interface Science

DOI

2013

Microwave-hydrothermal synthesis and humidity sensing behavior of ZrO2 nanorods

DOI

2013

Molecular-scale interface engineering of metal nanoparticles for plasmon-enhanced dye sensitized solar cells.

Dalton Transactions

DOI

2013

Fluorine-doped tin oxide colloid, and a method for preparing thereof

2013

Lithium ion battery diaphragm strengthened coating material and preparation method thereof

2013

Morphology control of ZnO bilayer structure by low-temperature hydrothermal process

DOI

2013

A simple route for decorating TiO2 nanoparticle over ZnO aggregates dye-sensitized solar cell

DOI

2013

Photoelectrocatalytic properties of Cu2+-doped TiO2 film under visible light

DOI

2013

Graded YSZ/Al2O3 hot corrosion resistant coating with enhanced thermal shock resistance

DOI

2013

Improved electron-collection performance of dye sensitized solar cell based on three-dimensional conductive grid

DOI

2012

A method for producing a zirconia colloid

2012

Photoelectrocatalytic performance of TiO2 nanoparticles incorporated TiO2 nanotube arrays

DOI

2012

Synthesis and characterization of highly dispersed TiO2 nanocrystal colloids by microwave-assisted hydrothermal method

Journal of Materials Science

DOI

2012

Gradient nano-coating used for thermal barrier coating anti-corrosion function and preparation method thereof

2011

金属氧化物半导体纳米晶液相法控制合成研究进展

《中国有色金属学报》

2011

The sol–gel template synthesis of porous TiO2 for a high performance humidity sensor

Nanotechnology

DOI

2011

Solvothermal preparation of Sn4+ doped anatase TiO2 nanocrystals from peroxo-metal-complex and their photocatalytic activity

DOI

2011

Solvothermal synthesis of crystalline phase and shape controlled Sn(4+)-doped TiO2 nanocrystals: effects of reaction solvent.

ACS Applied Materials and Interfaces

DOI

2011

Structure and humidity sensing properties of La1−xKxCo0.3Fe0.7O3−δ perovskite

DOI

2010

Surfactant-free synthesis uniform Ti1−xSnxO2 nanocrystal colloids and their photocatalytic performance

DOI

2009

电阻式纳米氧化物湿敏元件的特性研究

《吉林大学》

2009

Photodegradation of rhodamine B under visible light by bimetal codoped TiO2 nanocrystals.

Journal of Hazardous Materials

DOI

2009

DC and AC analysis of humidity sensitive properties based on K+ doped nanocrystalline LaCo0.3Fe0.7O3

DOI

2008

纳米晶LaCoxFe1-xO3的合成、表征及湿敏特性（英文）

《物理化学学报》

2008

Synthesis, Characterization and Humidity Sensitive Properties of Nanocrystalline LaCoxFe1–xO3

DOI

2008

Photocatalytic degradation of C.I. Acid Orange 52 in the presence of Zn-doped TiO2 prepared by a stearic acid gel method

DOI

2007

TiO2/Ag2O纳米材料的制备及其对甲醛的气敏性能

《物理化学学报》

2007

钠米晶LaCo0.2Fe0.8O3的制备及湿敏特性研究

《微纳电子技术》

2007

Humidity sensitive properties of K+-doped nanocrystalline LaCo0.3Fe0.7O3

DOI

2006

Study on TMA-sensing properties of nanocrystalline titanium dioxide materials

DOI

2005

纳米TiO2的制备及对三甲胺气体的敏感性能

《物理化学学报》

2005

Preparation of TiO 2 Nanocrystalline and Its Sensitive Property to TMA

DOI

2018

聚烯烃隔膜的功能化修饰及其对金属锂负极的保护

《第五届全国储能科学与技术大会》

2017

有机无机杂化修饰隔膜电化学性能及其对锂枝晶的影响

《第二届中国（国际）能源材料化学研讨会摘要集》

2016

氧化锡纳米晶/石墨烯复合负极材料的可控制备及其在锂电池中的应用

《中国颗粒学会第九届学术年会暨海峡两岸颗粒技术研讨会摘要集》

2016

Fabrication and Application of Organic/Inorganic Hybrid Thin Films on the Pore Wall of Microporous Polyethylene Separator

《2016中国国际功能材料大会(CIFM 2016)暨第九届中国功能材料及其应用学术会议(9th NCFMA)》

2012

三维导电网格的构造及其对染料敏化太阳能电池性能的影响

《第十三届全国太阳能光化学与光催化学术会议》

2012

TiO 2 /Bi 2 WO 6 异质结型光催化剂的制备及其可见光催化活性研究

《第十三届全国太阳能光化学与光催化学术会议》

2011

基于TiO 2 纳米管阵列的光电催化降解染料性能研究

《第六届全国环境化学大会暨环境科学仪器与分析仪器展览会摘要集》

2007

多孔TiO 2 的制备表征及光催化研究

《第六届中国功能材料及其应用学术会议论文集（7）》

2007

钠米晶LaCo 0．2 Fe 0．8 O 3 的制备及湿敏特性研究

《第十届全国敏感元件与传感器学术会议》

2004

纳米TiO 2 薄膜紫外吸收特性的研究

《第五届中国功能材料及其应用学术会议论文集Ⅱ》