王爱琴

2026

表层多孔Ti6Al4V/TiC梯度材料的构筑、组织和性能

《金属学报》

2026

多尺度Ti2AlC/TiAl复合材料的制备、显微组织及高温强化机理（英文）

Transactions of Nonferrous Metals Society of China

2026

Regulating creep behavior via dynamic in-situ precipitation of Ti3AlC phase in Ti45Al8Nb-0.6C alloy

China Foundry

DOI

2026

Fabrication, microstructure and high-temperature strengthening mechanism of multi-scale Ti2AlC/TiAl composite

Transactions of Nonferrous Metals Society of China

DOI

2026

In situ Carbide Strengthening for Enhanced 800 °C Tensile Performance of As‐Cast High‐Nb TiAl alloy

Advanced Engineering Materials

DOI

2026

Effect of annealing temperature on microstructure and mechanical properties of Ti₀.₃Zr₀.₃Hf₀.₃Fe₀.₀₅Ni₀.₀₅ high-entropy alloy

Journal of Alloys and Compounds

DOI

2026

Excellent mechanical properties and biocompatibility of Ti-15Mo alloy via interstitial nitrogen atoms

Metals Advances

DOI

2026

Fabrication a low-cost Ti-15Mo alloy with excellent mechanical properties via interstitial oxygen solid solution

Journal of Alloys and Compounds

DOI

2026

Competitive effects of diffusion‑induced recrystallization, IMC growth, and Σ3 twin boundaries on the electrical resistivity of Cu/Al layered composites during annealing

Journal of Alloys and Compounds

DOI

2026

Interfacial diffusion and microstructural evolution in cast-rolled C18150Cu/8011Al composites: A molecular dynamics study

Journal of Materials Research and Technology

DOI

2026

Simultaneous enhancement of room-temperature tensile properties and high-temperature creep resistance in Ti-45Al-8Nb alloy through multistage nanocarbide precipitation

Advanced Light Materials

DOI

2026

Transition of interfacial intermetallics microstructure and fracture mechanisms in Cu/Al layered composite fabricated by twin-roll casting

Intermetallics

DOI

2026

Deformation mechanism of the interfacial microregion in the 6H–SiC(0001)/Al(111) composite configuration

Journal of Materials Research and Technology

DOI

2026

Microstructure and mechanical properties of TC4 composites reinforced with multiscale TiCp

Journal of Materials Research and Technology

DOI

2025

交叉轧制对氢燃料电池用纯钛双极板织构演变及力学性能的影响规律

《精密成形工程》

2025

SiCp/Al-Si基复合材料制备工艺的研究现状

《粉末冶金工业》

DOI

2025

Hot deformation behavior of 2707 hyper duplex stainless steel

China Foundry

DOI

2025

Simultaneously enhancing strength and ductility in near-α TA18 titanium alloy via heterogeneous lamellar structure with deformation twins

Journal of Alloys and Compounds

DOI

2025

The Effect of Cryogenic-Temperature Rolling on the Microstructure and Mechanical Properties of TA18 Titanium Alloy

Journal of materials engineering and performance (Print)

DOI

2025

Simultaneous enhancement of strength and ductility of biomedical β-type Ti-35Nb-9Zr-7Sn alloy through oxygen-driven local chemical ordering and grain boundary nanolayers

Acta Materialia

DOI

2025

Fracture toughness enhancement mechanism of multimodal WC-10Co-4Cr coating sprayed by HVOF

International Journal of Refractory Metals and Hard Materials

DOI

2025

Effect of intermetallic compound layer thickness on the interface deformation mechanism and mechanical properties of polycrystalline Cu/Al2Cu/Al layered composite materials

Materials Today Communications

DOI

2025

Corrosion initiation and propagation in Cu–Al laminated composites: Roles of interfacial IMCs (Al2Cu, AlCu, Al4Cu9) and microgalvanic effects

Journal of Materials Research and Technology

DOI

2025

Microscopic deformation mechanisms of polycrystalline Cu/Al4Cu9/Al2Cu/Al interface microregions: A combined molecular dynamics and experimental study

Journal of Materials Research and Technology

DOI

2025

Effects of strain rate and temperature on the interface deformation mechanism of Cu/Al4Cu9/Al2Cu/Al multilayer composites: A molecular dynamic study

Journal of Materials Research and Technology

DOI

2025

Effect of grain size on the interface deformation mechanism and mechanical properties of polycrystalline Cu/Al2Cu/al layered composite materials: A molecular dynamics simulation

Journal of Materials Research and Technology

DOI

2025

Trace Zr Addition Enhances Strength and Plasticity in Cu-Zr/Al2Cu/Al Alloys via Local FCC-to-BCC Transition: Molecular Dynamics Insights on Interface-Specific Deformation and Strain Rate Effects

Materials

DOI

2025

Atomic-Scale Interfacial Dynamics and Twin Formation in Cu/Al2Cu/Al Layered Composites During Cooling: Insights from Molecular Dynamics Simulations

Nanomaterials

DOI

2024

铜铝层状复合材料原子尺度研究进展

《粉末冶金工业》

2024

基于分子动力学模拟的Cu-Zr/Al复合材料的变形行为

《材料热处理学报》

2024

Cu-Al层状复合材料金属间化合物结构稳定性的第一性原理计算

《材料热处理学报》

2024

SiCp/Al-Si基复合材料界面结构调控及强化机制的研究进展

《材料热处理学报》

2024

Fabricating a pure titanium foil with excellent strength-ductility combination via bimodal grain structure coupling with deformation twins

Materials Science & Engineering: A

DOI

2024

Effect of Cold‐Rolling Deformation on Texture Evolution and Tensile Properties of Titanium Foil for Hydrogen Fuel Cell

Advanced Engineering Materials

DOI

2024

Microstructure and properties of C18150 Cu/8011 Al/C18150 Cu laminated composites

Journal of Materials Research and Technology

DOI

2024

Hierarchically heterogeneous strategy for Ti2AlC/TiAl composite with superior mechanical properties

Composites Part B: Engineering

DOI

2024

Characterization of the interfacial micro-zones in C18150Cu/8011Al laminated composites

Journal of Materials Research and Technology

DOI

2024

Effect of carbon content on the microstructure and mechanical properties of Ti2AlC/TiAl composites with network architecture

Solid State Communications

DOI

2024

Interface evolution and properties of C18150 Cu/1060 Al composites in the process of annealing

Journal of Alloys and Compounds

DOI

2024

Influence of solid solubility and twin crystals on the deformation mechanism of nano single crystal Cu/Al2Cu/Al interface Configuration: A molecular dynamics simulation

Journal of Materials Research and Technology

DOI

2024

Molecular dynamics study on the deformation mechanism of Cu–Zr/Al laminated composites

Journal of Materials Research and Technology

DOI

2024

Effect of transition metal segregation on strength of Cu Σ5 [001](210) symmetrical tilt grain boundary: Insight from DFT calculation

Physica B Condensed Matter

DOI

2024

Study of bond strength and electronic properties at the 6H-SiC/Al interface: Based on first-principles calculations

International Journal of Adhesion and Adhesives

DOI

2024

Interfacial microstructure of dual-scale SiCp/A356 composites investigated by in situ TEM tensile testing

Journal of Alloys and Compounds

DOI

2024

Fabrication, microstructure and mechanical properties of TiAl composite with a Nb-enriched network reinforcement architecture

Materials Today Communications

DOI

2024

Molecular Dynamics Simulation of Uniaxial Tensile Mechanical Properties and Failure Mechanisms of MgAl2O4 Spinel

Advanced Engineering Materials

DOI

2024

Study on strengthening and toughening mechanisms of Cu/Al composites dominated by interface layer

Materials Characterization

DOI

2024

Effect of solid solution and vacancies on the mechanical properties of Cu(Al)/Al2Cu/(Cu)Al layered gradient heterostructures

Physica B Condensed Matter

DOI

2024

Texture characteristics and tensile deformation behavior of Cu/Al layered composites prepared by cast-rolling method

Journal of Materials Research and Technology

DOI

2023

7 mm厚TC4钛合金电子束焊接头组织和性能

《焊接》

2023

分子动力学分析Cu/Al2Cu/Al体系的扩散过程

《材料热处理学报》

2023

TC4钛合金电子束连接组织与性能演变

《特种铸造及有色合金》

2023

烧结温度对放电等离子烧结（SPS）制备氧化石墨烯/2024Al复合材料的微观组织和性能影响

《粉末冶金工业》

2023

C18150铜/1060铝层状复合材料铸轧工艺优化及组织性能研究

《精密成形工程》

2023

SiCp/Al-Si基复合材料的制备技术及组织性能

2023

The tensile and compressive deformation mechanisms of the Cu/Al2Cu/Al-layered composites via molecular dynamics simulation

Applied Physics A

DOI

2023

In-Situ Observation and Analysis of the Evolution of Copper Aluminum Composite Interface

Metals

DOI

2023

Revealing the influence of solute segregation on the stability and strength of Cu Σ11 [110](113) symmetrical tilt grain boundary via first-principles investigation

Journal of Materials Research and Technology

DOI

2023

First-principles study of structural stability and electronic properties of polar MgAl2O4/Al interface

Journal of Physics and Chemistry of Solids

DOI

2023

Effect of Al 2 Cu constituent layer thickness discrepancy on the tensile mechanical behavior of Cu/Al 2 Cu/Al layered composites: a molecular dynamics simulation

Nanotechnology

DOI

2023

Effect of spark plasma sintering temperature on the multi-scale microstructure evolution and mechanical properties of Ti2AlC/TiAl composites with network architecture

Journal of Materials Research and Technology

DOI

2023

Effect of deep cryogenic treatment on the microstructure and mechanical properties of Al–Cu–Mg–Ag alloy

Journal of Materials Research and Technology

DOI

2023

A systematic investigation on the surface properties of Ti2AlC via first-principles calculations

Surface Science

DOI

2023

The prediction of Al2Cu/Cu interfacial structure and properties: A first-principles study

Physica B Condensed Matter

DOI

2023

Insight into the Influence of Alloying Elements on the Elastic Properties and Strengthening of Copper: A High-Throughput First-Principles Calculations

Metals

DOI

2023

Superior strength-plasticity synergy in a heterogeneous lamellar Ti2AlC/TiAl composite with unique interfacial microstructure

Journal of Material Science and Technology

DOI

2023

Atomic-scale deformation mechanisms of nano-polycrystalline Cu/Al layered composites: a molecular dynamics simulation

Journal of Materials Research and Technology

DOI

2023

Microstructure evolution and mechanical properties of the Al-Cu-Mg-Ag alloy during non-isothermal aging

Journal of Alloys and Compounds

DOI

2023

The Microstructure Evolution and Dynamic Softening Mechanism of a 00Cr27Ni7Mo5N Hyper Duplex Stainless Steel

steel research international

DOI

2023

Investigation of the nucleation and growth behavior of Ti 2 AlC and Ti 3 AlC nano-precipitates in TiAl alloys

Nanotechnology Reviews

DOI

2023

Dynamic recrystallization behavior and nucleation mechanism of dual-scale SiC p /A356 composites processed by P/M method

Nanotechnology Reviews

DOI

2022

CeO2对Al-7Si-Mg合金组织与性能的影响

《特种铸造及有色合金》

2022

First-principles investigation of TiC(001)/TiAl(100) interface: atomic structure, stability and electronic property

Journal of Materials Science

DOI

2022

Microstructure evolution and strengthening mechanism of A356 composites reinforced with micron and nano SiCp

Materials Research Express

DOI

2022

Effect of Secondary-Phase Precipitation on Mechanical Properties and Corrosion Resistance of 00Cr27Ni7Mo5N Hyper-Duplex Stainless Steel during Solution Treatment

Materials

DOI

2022

Investigation on the In Situ Ti2AlC/TiAl Composite with a Homogenous Architecture by Adding Graphene Nanosheets

Materials

DOI

2022

Recent research progress in TiAl matrix composites: a review

Journal of Materials Science

DOI

2022

Microstructure evolution and process optimization of molybdenum rods during loose tooling forging

International Journal of Refractory Metals and Hard Materials

DOI

2022

Balancing the strength and ductility of Ti2AlC/TiAl composite with a bioinspired micro-nano laminated architecture

Materials & Design

DOI

2022

Effects of Aging Temperature on the Mechanical Properties and Precipitation Behavior of a Pre-strained Al–Cu–Mg–Ag Alloy

Metals and Materials International

DOI

2022

Investigation on the WC/Cu interfacial bonding properties: First-principles prediction and experimental verification

International Journal of Refractory Metals and Hard Materials

DOI

2022

Fabrication, microstructure and compressive properties of Ti2AlC/TiAl composite with a bioinspired laminated structure

Vacuum

DOI

2022

The effect mechanism of Zn, Ni and Mn solute elements on the WC/Cu-based filler metal interfacial properties: first-principles calculations and experiments

Journal of Materials Research and Technology

DOI

2022

Design and Fabrication of a 5Ti5Zr5Nb1Sn High‐Entropy Alloy as Metallic Biomedical Material

Advanced Engineering Materials

DOI

2022

Effects of rare earth metals on microstructure, mechanical properties, and pitting corrosion of 27% Cr hyper duplex stainless steel

REVIEWS ON ADVANCED MATERIALS SCIENCE

DOI

2022

Interface optimization strategy for enhancing the mechanical and thermal properties of aligned graphene/Al composite

Journal of Alloys and Compounds

DOI

2022

Molecular dynamics study of deformation mechanism of interfacial microzone of Cu/Al 2 Cu/Al composites under tension

Nanotechnology Reviews

DOI

2022

Investigation on the In-Situ Reaction Mechanism of Ti2alc/Tial Composite Prepared by Spark Plasma Sintering

Materials Characterization

DOI

2021

微纳米混杂颗粒增强铝基复合材料的设计与研究进展

《材料热处理学报》

2021

铜铝复合板的拉深变形行为

《材料热处理学报》

DOI

2021

Effect of CeO2 Content on Microstructure and Properties of SiCp/Al-Si Composites Prepared by Powder Metallurgy

Materials

DOI

2021

Second phase structure analysis and wear behavior of the ultra-high manganese steel

Materials Research Express

DOI

2021

Deformation mechanisms in Al/Al2Cu/Cu multilayer under compressive loading

Journal of Alloys and Compounds

DOI

2021

TiN/γ-Fe interface orientation relationship and formation mechanism of TiN precipitates in Mn18Cr2 steel

China Foundry

DOI

2021

Research on static recrystallization behaviour of pure molybdenum rods during forging

Materials Research Express

DOI

2021

Optimization of volume fraction and microstructure evolution during thermal deformation of nano-SiCp/Al–7Si composites

Nanotechnology Reviews

DOI

2020

双尺度SiCp/A356复合材料的热变形行为及本构模型

《材料热处理学报》

DOI

2020

Study on optimization of nozzle for copper-aluminium clad plate twin-roll cast-rolling

Journal of Materials Research and Technology

DOI

2020

Effects of CeO2 Content on Friction and Wear Properties of SiCp/Al-Si Composite Prepared by Powder Metallurgy

Materials

DOI

2020

Effects of CeO2 on the Si Precipitation Mechanism of SiCp/Al-Si Composite Prepared by Powder Metallurgy

Materials

DOI

2020

Dynamic softening mechanism of 2 vol.% nano-sized SiC particle reinforced Al-12Si matrix composites during hot deformation

Materials Research Express

DOI

2020

Hot-Deformation Behavior and Microstructure Evolution of the Dual-Scale SiCp/A356 Composites Based on Optimal Hot-Processing Parameters

Materials

DOI

2020

Effects of annealing temperature on the interfacial microstructure and bonding strength of Cu/Al clad sheets produced by twin-roll casting and rolling

Journal of Materials Processing Technology

DOI

2020

Molecular dynamics simulation on the deformation mechanism of monocrystalline and nano-twinned TiN under nanoindentation

Materials Chemistry and Physics

DOI

2020

An interatomic potential for accurately describing the atomic-scale deformation behaviors of Ti2AlC crystal

Computational Materials Science

DOI

2020

Hot Deformation Behavior and Strain-Compensated Constitutive Equation of Nano-Sized SiC Particle-Reinforced Al-Si Matrix Composites

Materials

DOI

2020

HRTEM study of interfacial structure in SiCp/A390 composites

Materials Research Express

DOI

2020

An atomic-scale investigation on the initial precipitation behavior of nitrides in TiAl alloys

Intermetallics

DOI

2020

First-principles prediction of enhancing graphene/Al interface bonding strength by graphene doping strategy

Applied Surface Science

DOI

2020

The diffusion behaviors at the Cu-Al solid-liquid interface: A molecular dynamics study

Results in Physics

DOI

2019

铜铝铸轧复合板复合过程数值模拟及机理研究

《特种铸造及有色合金》

DOI

2019

纳米SiCp/Al复合材料的热变形行为

《材料热处理学报》

DOI

2019

铜铝层状复合材料的研究进展

《材料科学与工程学报》

DOI

2019

纯钼双道次热变形行为

《材料热处理学报》

DOI

2019

钼粉物理性能对纯钼板组织和力学性能的影响

《稀有金属与硬质合金》

2019

Coupling effects of matrix and interface on synergetic deformation behaviors of Cu/Al composite plates

Materials Research Express

DOI

2019

First-principles investigation on the atomic structure, stability and electronic property of O(001)/B2(110) interface in Ti2AlNb alloys

Journal of Alloys and Compounds

DOI

2019

First-principle calculations on the structure of 6H-SiC/Al interface

Materials Research Express

DOI

2019

Numerical Simulation of Cast-rolling Process for Copper-Aluminum Composite Plate

Procedia Manufacturing

DOI

2018

不同应变速率下铜/铝层状复合材料的拉伸变形行为

《材料热处理学报》

2018

纯Mo板材的微观孔洞研究

《特种铸造及有色合金》

2018

CeO2含量对SiCp/Al-12Si复合材料性能和微观组织的影响

《粉末冶金工业》

2018

钼及钼合金溅射靶材的研究现状与发展趋势

《粉末冶金技术》

2018

Effects of vacancies at Al(1 1 1)/6H-SiC(0001) interfaces on deformation behavior: A first-principle study

Computational Materials Science

DOI

2018

The synergetic tensile deformation behavior of Cu/Al laminated composites prepared by twin-roll casting technology

Materials Research Express

DOI

2018

Interfacial microstructure and bonding strength of copper/aluminum clad sheets produced by horizontal twin-roll casting and annealing

Materials Research Express

DOI

2018

Numerical simulations of the Cu/Al composite plate continuous cast-rolling process

Materials Research Express

DOI

2018

Effects of Heating Mode and Temperature on the Microstructures, Electrical and Optical Properties of Molybdenum Thin Films

Materials

DOI

2018

Effects of thickness ratios and sputtering mode on the structural, electrical and optical properties of bilayer molybdenum thin films

AIP Advances

DOI

2018

Interfacial Characterization and Bonding Properties of Copper/Aluminum Clad Sheets Processed by Horizontal Twin-Roll Casting, Multi-Pass Rolling, and Annealing

Metals

DOI

2018

Hot Deformation Behaviors of Cu/Al Laminated Composites

IOP Conference Series Materials Science and Engineering

DOI

2018

Effect of Deformation Temperature, Strain Rate and Strain on the Strain Hardening Exponent of Copper/Aluminum Laminated Composites

Advanced Composites Letters

DOI

2018

Hot deformation behavior of Cu/Al laminated composites under interface constraint effect

Materials Research Express

DOI

2017

Sip/Al基复合材料中Si相的组织演变及性能

《材料热处理学报》

2017

SiCP/Al-Cu复合材料的高温热变形行为

《材料工程》

2017

铜铝复合材料研究进展

《特种铸造及有色合金》

2017

铝合金叶片热挤压工艺设计

《锻压技术》

2017

铜铝复合板界面相生长行为

《材料热处理学报》

2017

First-principles study of the structure properties of Al(111)/6H-SiC(0001) interfaces

Surface Science

DOI

2017

Effects of solution treatment on mechanical properties and corrosion resistance of 4A duplex stainless steel

International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde)

DOI

2017

Contact resistance and arc erosion of tungsten-copper contacts in direct currents

Journal of Wuhan University of Technology-Mater Sci Ed

DOI

2017

Effect of Solid Solution and Ageing Treatments on the Microstructure and Mechanical Properties of the SiCp/Al-Si-Cu-Mg Composite

Kemija u industriji

DOI

2017

Microstructures and Properties of Sintered Cu-MoS2/Cu Functional Gradient Materials

International Conference on Manufacturing Engineering and Intelligent Materials (ICMEIM)

DOI

2017

Optimization of SiCp Surface and Interface Structure of SiCp/A390 Composites

International Conference on Manufacturing Engineering and Intelligent Materials (ICMEIM)

DOI

2016

微米级SiC颗粒增强铝基复合材料的强化机制

《材料热处理学报》

2016

非连续相混杂增强金属基复合材料的研究进展

《粉末冶金工业》

2016

SiCp表面处理对SiCp/A390复合材料组织与性能的影响

《材料热处理学报》

2016

粉末冶金法制备SiCp/Al复合材料的研究现状

《粉末冶金工业》

2016

SiC颗粒的氧化行为研究

《粉末冶金工业》

2016

CeO2对SiCp/Al-Si复合材料中析出Si影响机理的研究

《粉末冶金工业》

2016

W-20%Cu复合材料超高速干滑动摩擦磨损行为研究

《稀有金属与硬质合金》

2016

30% SiCp/2024Al复合材料的热变形行为

《粉末冶金材料科学与工程》

2016

30% SiCp/Al复合材料热变形及动态再结晶行为

《粉末冶金材料科学与工程》

2016

Effect of Lanthanum on Microstructures and Properties of ASTM A216 Steel

Kemija u industriji

DOI

2015

热处理过程中SiCp/2024Al基复合材料的微观组织演变

《材料热处理学报》

2015

时效Al-30Si微晶合金的组织演变及性能

《材料热处理学报》

2015

粉体粒径级配比对粉末冶金SiCp/6061Al复合材料组织与性能的影响

《粉末冶金材料科学与工程》

2015

30%SiCp/2024Al复合材料动态再结晶临界条件

《材料热处理学报》

2015

退火工艺对W-20%Cu复合材料组织与性能的影响

《材料热处理学报》

2015

SiC和Si混合颗粒增强铝基复合材料的研究现状

《粉末冶金工业》

2015

热挤压对SiC/2024Al复合材料性能的影响

《粉末冶金工业》

2015

SiC颗粒增强Al基复合材料的研究现状与进展

《粉末冶金工业》

2015

钼合金研究现状

《粉末冶金工业》

2015

真空热压SiCp/2024Al复合材料力学性能与显微结构

《材料热处理学报》

2015

Effect of heat treatment on microstructure and mechanical properties of SiCp/2024 aluminum matrix composite

Journal of Wuhan University of Technology-Mater Sci Ed

DOI

2015

Investigation on critical strain of dynamic recrystallization for SiCp/Al-Cu composite

IOP Conference Series Materials Science and Engineering

DOI

2015

Characterization and evaluation of interface in SiC p /2024 Al composite

Transactions of Nonferrous Metals Society of China

DOI

2015

Dynamic recrystallization model of 30%SiCp/Al composite

Journal of Alloys and Compounds

DOI

2015

Electrical sliding wear properties of Mo-reinforced MoS2/Cu composites

Journal of Wuhan University of Technology-Mater Sci Ed

DOI

2015

Influence of Quenching Temperature on Microstructure and Properties of Cr5 steel

Advances in engineering research/Advances in Engineering Research

DOI

2014

SiCp/2024A1复合材料的热变形行为及加工图(英文)

《稀有金属材料与工程》

2014

SiC颗粒预处理对SiCp/Al-Si复合材料组织及性能的影响

《粉末冶金工业》

2014

SiC颗粒增强Al-Si基复合材料的国内研究进展

《粉末冶金工业》

2014

MoS2含量对Cu/Cu-MoS2功能复合材料组织及性能的影响

《粉末冶金工业》

2014

高硅铝合金及颗粒增强铝基复合材料组织性能的探究

《粉末冶金工业》

2014

退火温度对铜铝铸轧复合板界面组织和力学性能的影响

《机械工程材料》

2014

真空热压法制备铜基功能梯度材料及其性能

《特种铸造及有色合金》

2014

铜铝复合板界面组织和性能研究

《特种铸造及有色合金》

2014

SiCp增强铝基复合材料的力学性能和断裂机理

《特种铸造及有色合金》

2014

纳米钨铜复合粉末的制备及其烧结行为研究

《稀有金属与硬质合金》

2014

中体分SiCp/A1复合材料的热变形行为和功率耗散图

《材料热处理学报》

2014

球磨时间对高粒径比SiCp/6061Al复合粉末形貌及复合材料组织与性能的影响

《粉末冶金材料科学与工程》

2014

SiCp/Al-30Si复合材料的界面反应机理

《粉末冶金材料科学与工程》

2014

微米级SiC颗粒对铝基复合材料拉伸性能与强化机制的影响

《材料热处理学报》

2014

YBCO掺杂对铜基复合材料的组织及性能的影响

《特种铸造及有色合金》

DOI

2014

Hot deformation behaviors of 35%SiCp/2024Al metal matrix composites

Transactions of Nonferrous Metals Society of China

DOI

2014

Thermal expansion and mechanical properties of middle reinforcement content SiCp/Al composites fabricated by PM technology

Journal of Wuhan University of Technology-Mater Sci Ed

DOI

2014

Effect of consolidation parameters and heat treatment on microstructures and mechanical properties of SiCp/2024 Al composites

Science and Engineering of Composite Materials

DOI

2014

Effect of Sic Volume Fraction on Properties of Sic/6061 Composites

Polymers and Polymer Composites

DOI

2014

Preparation, Properties and Microstructure of SiC Particle Reinforced Al–Si Matrix Composite

MATERIALS TRANSACTIONS

DOI

2013

SiC含量对SiC/6061Al基复合材料性能的影响

《粉末冶金工业》

2013

SiC颗粒尺寸对铝基复合材料组织性能的影响

《粉末冶金技术》

2013

热压温度对30%SiCp/Al复合材料组织与力学性能的影响

《粉末冶金材料科学与工程》

2013

碳化硅体积分数对SiCp/Al-30Si复合材料组织与性能的影响

《粉末冶金材料科学与工程》

2013

颗粒尺寸及分布均匀性对SiC/Al-30Si复合材料组织性能的影响

《粉末冶金技术》

2013

快速凝固Al-21Si-0.8Mg-1.5Cu合金时效析出行为

《材料热处理学报》

2013

碳化硅颗粒增强铝基复合材料研究现状与展望

《稀有金属与硬质合金》

2013

铝基复合材料在汽车领域的应用研究进展

《稀有金属与硬质合金》

2013

Effects of cerium and phosphorus on microstructures and properties of hypereutectic Al-21%Si alloy

Journal of Rare Earths

DOI

2012

真空热压烧结制备SiCp/Al-30Si复合材料的组织及强化机理

《材料热处理学报》

2012

快速凝固高硅铝合金的发展现状及制备方法

《稀有金属与硬质合金》

2012

Research Status and Development Trend of Low-medium Alloy Wear Resistant Steel

Rejiagong gongyi

2010

大型高铝锌基合金轴瓦铸造工艺优化

《特种铸造及有色合金》

2010

快速凝固过共晶铝硅合金的微观组织特征及耐磨性研究

《摩擦学学报(中英文)》

DOI

2010

La对高铝锌合金组织和性能的影响

《铸造》

2010

Influence of Different Al Contents on Microstructure, Tensile and Wear Properties of Zn-based Alloy

Journal of Material Science and Technology

DOI

2009

快速凝固共晶铝硅合金的组织特征及形成机理

《热加工工艺》

2009

Ti、B对ZA27合金组织及力学性能的影响

《热加工工艺》

2009

固溶处理对快速凝固过共晶铝硅合金组织性能的影响

《特种铸造及有色合金》

2009

The effect of composition segregation on the friction and wear properties of ZA48 alloy in dry sliding condition

Journal of Materials Science

DOI

2009

Microstructure and properties of the new high strength-toughness and wear-resistant cast steel

Mining & Processing Equipment

2008

快速凝固Al-Si合金的组织形态及相结构

《材料热处理学报》

DOI

2008

ZL108合金的快速凝固微观组织研究

《特种铸造及有色合金》

2008

不同加钛方式对Zn-Al合金组织及耐磨性的影响

《特种铸造及有色合金》

2007

铝钛二元合金凝固过程数学模型的建立及应用

《铸造技术》

2007

P+RE变质对过共晶Al-Si合金组织性能的影响

《特种铸造及有色合金》

2007

稀土和磷复合变质对Al-21%Si合金组织和耐磨性的影响

《铸造技术》

2007

用电解低钛铝锭熔配的A356合金的固溶处理工艺优化

《轻合金加工技术》

2007

Microstructural investigation of cast medium-manganese austenitic steel with composite surface

Materials Science and Engineering A

DOI

2006

The computer solidification simulation of the end cover of large ball mill

International Conference on Mechatronics and Automation

DOI

2005

SiCp/ZA27复合材料的界面结构及耐磨性研究

《特种铸造及有色合金》

2004

Al基合金原位Ti合金化及自身晶粒细化

《特种铸造及有色合金》

2020

铜/铝复合板带半熔态连续铸轧制备技术及应用

《2020中国铸造活动周论文集》

DOI

2015

预处理SiCp及SiCp/A390复合材料界面化学反应分析

《2015中国铸造活动周论文集》

2014

碳化硅颗粒尺寸对SiC P /6061Al物理性能及拉伸断口的影响

《2014中国铸造活动周论文集》

2007

快速凝固低钛过共晶铝硅合金组织特征(英文)

《第五届国际材料与热加工物理模拟及数值模拟学术会议》