谢鲲｜山东科技大学｜学者主页

2026

282高温合金的蠕变行为和断裂机理(英文)

夏鹏成，谢鲲，丁相珍

Transactions of Nonferrous Metals Society of China

2026

Effects of Annealing Temperature on the Microstructure and Mechanical Properties of Warm‐Rolled Advanced High‐Strength Twinning‐Induced Plasticity Steel

Meiqing Cao, Wei Zhang, Kun Xie, Bowen Ye, Pengtao Chen, Yunlong Song, Zhichao Li

steel research international

DOI

2025

Tailoring Heterogeneous Austenite Stability via Rapid Heating in Medium‐Mn Steel: Enabling Discontinuous Sustained Transformation‐Induced Plasticity

Ying Sun, Yingjian Jiao, Zhichao Li, Kun Xie, Lianfang He, Huiping Li

steel research international

DOI

2025

Effect of annealing temperature on the microstructure and property of roll-bonded five-ply ASS/Al/Mg/Al/ASS laminated composites

Jiaqi Zhao, Pengcheng Xia, Kun Xie, Meiqing Cao, Hong Yan

Materials Characterization

DOI

2024

NiAl复合涂层中强化相的形成机理及其对磨损性能的影响

夏鹏成，占庆威，谢鲲，曹梅青，岳丽杰，孙晓华，董俊伟

《表面技术》

2024

TWIP钢表面Ni-P化学镀层组织结构及性能研究

岳丽杰，薛广成，谢鲲，韩金生，孙一品

《表面技术》

2024

材料腐蚀与防护实验教学案例设计

岳丽杰，杨克森，韩金生，谢鲲

《实验技术与管理》

2023

有序排列硬质合金颗粒增强铁基复合材料的研究

杨建业，谢鲲，岳丽杰，夏鹏成，曹梅青，谭云亮

《表面技术》

2023

温轧TWIP钢/高碳钢组织及力学性能研究

曹梅青，温将云，陈鹏涛，谢鲲，黄亚杰，谭云亮

《山东科技大学学报(自然科学版)》

2023

Production of Ultrahigh‐Strength and High‐Ductility TWIP Steel by Precipitation of β‐Mn during Large Deformation during Warm‐Rolling

Meiqing Cao, Pengtao Chen, Kun Xie, Pengcheng Xia, Lijie Yue, Bowen Ye, Yunliang Tan

steel research international

DOI

2022

气体催化渗氮研究进展

于群，时垌，林威，孙金全，黄鑫，鲍建齐，王东瑞，杨洁，李福杰，谢鲲，李文生，陈蕴博

《材料热处理学报》

2022

金属耐磨蚀表面复合处理绿色节能新技术

仲崇阳，孙金全，李福杰，赵宇航，杨洁，王鹏宇，张海峰，谢鲲，李文生

《金属加工(热加工)》

2022

钢的渗氮层耐蚀性研究进展

司晋伟，孙金全，鲍建齐，黄鑫，李福杰，杨洁，谢鲲，崔洪芝

《材料热处理学报》

2022

The Influence of Cladding Current on the Microstructure and Wear Properties of NiAl Composite Coatings

Pengcheng Xia, Tonghui Yin, Kun Xie, Meiqing Cao, Yunliang Tan

Journal of Thermal Spray Technology

DOI

2022

Effect of trace water in ammonia on breaking passive film of stainless steel during gas nitriding

Tong Fei Shi, Jin-Quan Sun, Xingwei Wang, Qingkun He, Jinwei Si, Dongrui Wang, Kun Xie, Wensheng Li

Vacuum

DOI

2022

Pitting corrosion behavior of Cu–P–RE weathering steels

Lijie Yue, Yeshu Meng, Jinsheng Han, Kun Xie, Yipin Sun, Yunliang Tan

Journal of Rare Earths

DOI

2021

退火温度对Fe-Mn-Al-C钢组织和拉伸性能的影响

李烨，夏鹏成，谢鲲，曹梅青，谭云亮，金晓龙

《金属热处理》

2021

金属材料加工工程方向专业课教学改革与实践探索

曹梅青，谢鲲，夏鹏成，岳丽杰

《中国现代教育装备》

DOI

2021

基于实践项目的材料腐蚀与防护综合性实验设计

岳丽杰，曹梅青，夏鹏程，谢鲲

《实验技术与管理》

DOI

2021

Formation mechanism of TiC–Al2O3 ceramic reinforcements and the influence on the property of ZL101 composites

Pengcheng Xia, Yanhao Wu, Tonghui Yin, Kun Xie, Yunliang Tan

Ceramics International

DOI

2021

Strong effect of carbides and alloy elements in gradient nanostructured 32Cr2Mo1VE steel on nitrogen atom diffusion

Sai Cai, Jinquan Sun, Yanpeng Xue, Qingkun He, Jie Huan, Tong Fei Shi, Jinwei Si, Dongrui Wang, Kun Xie

Materials Characterization

DOI

2021

Effect of Plasma Cladding Speed on the Microstructure and Properties of ZrC-ZrB2/NiAl Coating

Pengcheng Xia, Ye Li, Kun Xie, Meiqing Cao, Yunliang Tan

Materials Research

DOI

2020

温轧TWIP钢芯三层板的组织和力学性能

吕萧，曹梅青，谢鲲，陈鹏涛，谭云亮

《热加工工艺》

DOI

2020

金属材料专业的焊接实践课程教学改革

岳丽杰，曹梅青，夏鹏成，谢鲲

《中国现代教育装备》

DOI

2020

Fabrication of Cu-ZrO2 composites by in situ oxidation of liquid Cu–Zr alloy

Kun Xie, Chang Han, Jing Liu, Yunliang Tan

Journal of Nanoparticle Research

DOI

2020

Study on corrosion behavior of TWIP steel and properties of surface electroless Ni-P coatings

Minghui Yang, Lijie Yue, Kun Xie, Shuxin Zhang, Yipin Sun, Yunliang Tan

Materials Research Express

DOI

2019

气体催化渗氮对12Cr1MoV钢力学性能的影响

刘仲玉，王兴伟，孙金全，王万珍，赵昌德，陈蕴博，左玲立，谢鲲

《材料热处理学报》

DOI

2019

焊接方法与设备之《高能密度焊》讲解

曹梅青，张芬，谢鲲，夏鹏成，岳丽杰

《科技视界》

DOI

2019

三元相图立体模型的设计及3D打印制作

谢鲲，曹梅青，丁建旭，夏鹏成，岳丽杰，孙金全，魏文阁

《中国现代教育装备》

DOI

2019

Green preparation of copper/microalloyed gradient coating on crankshaft surface with improved wear resistance

Guozhi Liu, Jin-Quan Sun, Qian-Cheng Liu, Fei Ma, Kun Xie, Lingli Zuo, Yunbo Chen

Materials Research Express

DOI

2019

Effect of SiC addition on the microstructures and wear resistance of ZrB2-ZrC reinforced Ni-based composite coatings

Tian-guo Guan, Meiqing Cao, Kun Xie, Pengcheng Xia, Lijie Yue, Xiao Lv, Yunliang Tan

Materials Research Express

DOI

2019

Residual stresses and wear properties of induction-hardened medium carbon steel

Liu Qc, YJ Cao, JQ Sun, QK He, YL Tan, BM Li, Kun Xie

Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology

DOI

2019

Abrasive resistance and corrosion properties of AISI 316 sieve via low-temperature gaseous nitriding

Xingwei Wang, Zhongyu Liu, Yangyang Chen, Jinquan Sun, Qingkun He, Qiancheng Liu, Guozhi Liu, Kun Xie

Surface and Coatings Technology

DOI

2019

Microstructure and Wear Resistance of ZrC-ZrB2 /Ni Composite Coatings Prepared by Plasma Transferred Arc Cladding

Tian-guo Guan, Meiqing Cao, Kun Xie, Xiao Lv, Yunliang Tan

Materials Research

DOI

2018

变速器定子齿轮渗碳、渗氮硬化表面耐磨性研究

陈洋洋，刘前程，刘仲玉，高翔，谢鲲，孙金全

《热加工工艺》

2018

HT250刹车盘气体渗氮耐磨性研究

程相征，谢鲲，赫庆坤，高翔，陈洋洋，曹勇军，陈蕴博，孙金全

《摩擦学学报(中英文)》

2018

《焊接方法与设备》教学改革与实践

曹梅青，谢鲲，夏鹏成，岳丽杰

《科技视界》

2018

铸造合金及其熔炼课程教学模式的改革

夏鹏成，谢鲲，曹梅青，岳丽杰

《科技视界》

2018

提高铸造工艺学课程教学质量的几点措施

夏鹏成，谢鲲，曹梅青，岳丽杰

《科技视界》

2018

AISI 316L不锈钢热处理表面贫铬分析与质量控制

王兴伟，刘国志，赫庆坤，路东宁，时垌，江允楠，高翔，马飞，谢鲲，孙金全

《金属加工(热加工)》

2018

强化材料类专业实践教学改革培养高素质创新应用复合人才

夏鹏成，谢鲲，曹梅青，孙金全，李敏，姚树玉，岳丽杰

《山东化工》

2018

金属材料腐蚀与防护实践教学改革初探

岳丽杰，曹梅青，夏鹏程，谢鲲

《科技视界》

2018

Glass Forming Ability and Crystallization Kinetics of Cu-Zr-Al-(Y, Ag) Amorphous Alloy

Lijie Yue, Yali Liu, Kun Xie

Journal of Wuhan University of Technology-Mater Sci Ed

DOI

2018

Green preparation of silver coating on AISI 304 stainless steel surface by Ag nanocrystalline in-situ growth and the wear resistance

Guozhi Liu, Xiang Gao, Qingkun He, Xingwei Wang, Qiancheng Liu, Zhongyu Liu, Kun Xie, Jinquan Sun

Applied Surface Science

DOI

2018

Improvement in dry-sliding wear properties and corrosion resistance of AISI 304 steel with low temperature gaseous nitriding

Y.Y. Chen, Jin Quan Sun, Qing Kun He, Fei Ma, Yong Jun Cao, Xiang Gao, Sheng Tang Zhang, Kun Xie

International Journal of Materials Engineering Innovation

DOI

2017

凹槽类零件漏磁控制感应淬火

高翔，程相征，马飞，谢鲲，李保民，孙金全

《金属热处理》

2017

Effect of the microstructure and residual stress on tribological behavior of induction hardened GCr15 steel

Yang Cao, Jinquan Sun, Fei Ma, Y.Y. Chen, Xuezhen Cheng, Xingke Gao, Kun Xie

Tribology International

DOI

2017

Influence of Heat Treatment on γ´ Phase and Property of a Directionally Solidified Superalloy

Pengcheng Xia, Kun Xie, Hongzhi Cui, Junxi Yu

High Temperature Materials and Processes

DOI

2016

稀土氧化物弥散强化铜基复合材料的制备技术

谢鲲，张惠，张守清

《热加工工艺》

2016

预处理组织对20CrMnMo钢气体渗氮耐磨性的影响

高翔，邵丹，谢鲲，赫庆坤，程相征，孙金全

《材料热处理学报》

2016

Effect of compositions on the microstructure and properties of plasma clad NiAl coating

Pengcheng Xia, Guanpeng Han, Kun Xie

Metals and Materials International

DOI

2015

Influence of microstructures on thermal fatigue property of a nickel-base superalloy

Pengcheng Xia, Feng-Wen Chen, Kun Xie, Ling Qiao, Jinjiang Yu

Frontiers of Materials Science

DOI

2015

Cerium addition on pitting corrosion of (Cu50Zr50)100–2xCe2x(x=0, 1, 2 and 3) metallic glasses in seawater

Chunzhi Zhang, Jinhuan WANG, Nannan QIU, Kun Xie, Huiping Li

Journal of Rare Earths

DOI

2014

Effect of Notch Radius on the Thermal Fatigue Property of a New Guide Vane Materials

Peng Cheng Xia, Guan Peng Han, Kun Xie

Advanced materials research

DOI

2014

Study on Corrosion Resistance of Several Fe-Based Amorphous Alloys

Xiu Juan Tian, Wan Fu Liu, Kun Xie

Materials science forum

DOI

2013

Improving wear resistance of magnesium by droplet spraying of Al-Si alloy

Kun Xie, Meiqing Cao, Pengcheng Xia, Lijie Yue

Journal of Central South University

DOI

2012

Droplet spraying of aluminum on magnesium

Kun Xie, Lijie Yue, Pengcheng Xia, Meiqing Cao, Yuanchao Du

Journal of Central South University

DOI

2011

AZ91表面熔滴涂覆Al涂层的研究

谢鲲，崔洪芝，孙金全，夏鹏成，岳丽杰，曹梅青，陈蕴博

《稀有金属材料与工程》

2011

26Cr2Ni4MoV转子钢晶粒细化研究

王健，李永兵，金嘉瑜，谢鲲，陈蕴博

《金属热处理》

2011

Preparation of Mg-Cu-Y and Mg-Ni-Gd Based Amorphous Brazing Material

Mei Qing Cao, Kun Xie

Materials science forum

DOI

2011

The Microalloying Effects in Cu-Based Bulk Metallic Glasses

Yue Li, Jin Sheng Han, Kun Xie

Materials science forum

DOI

2010

微量元素对Cu-Zr-Al系非晶合金性能的影响

岳丽杰，谢鲲，陈蕴博，夏鹏成

《功能材料》

2010

Cu-Zr基块体非晶合金的研究进展

岳丽杰，陈蕴博，谢鲲

《热加工工艺》

2010

复杂曲面结构凸轮槽高频感应淬火工艺及组织与性能

李永兵，王健，左玲立，谢鲲，陈蕴博

《金属热处理》

精选作品

期刊论文

282高温合金的蠕变行为和断裂机理(英文)

Effects of Annealing Temperature on the Microstructure and Mechanical Properties of Warm‐Rolled Advanced High‐Strength Twinning‐Induced Plasticity Steel

Tailoring Heterogeneous Austenite Stability via Rapid Heating in Medium‐Mn Steel: Enabling Discontinuous Sustained Transformation‐Induced Plasticity

Effect of annealing temperature on the microstructure and property of roll-bonded five-ply ASS/Al/Mg/Al/ASS laminated composites

NiAl复合涂层中强化相的形成机理及其对磨损性能的影响

TWIP钢表面Ni-P化学镀层组织结构及性能研究

材料腐蚀与防护实验教学案例设计

有序排列硬质合金颗粒增强铁基复合材料的研究

温轧TWIP钢/高碳钢组织及力学性能研究

Production of Ultrahigh‐Strength and High‐Ductility TWIP Steel by Precipitation of β‐Mn during Large Deformation during Warm‐Rolling

气体催化渗氮研究进展

金属耐磨蚀表面复合处理绿色节能新技术

钢的渗氮层耐蚀性研究进展

The Influence of Cladding Current on the Microstructure and Wear Properties of NiAl Composite Coatings

Effect of trace water in ammonia on breaking passive film of stainless steel during gas nitriding

Pitting corrosion behavior of Cu–P–RE weathering steels

退火温度对Fe-Mn-Al-C钢组织和拉伸性能的影响

金属材料加工工程方向专业课教学改革与实践探索

基于实践项目的材料腐蚀与防护综合性实验设计

Formation mechanism of TiC–Al2O3 ceramic reinforcements and the influence on the property of ZL101 composites

Strong effect of carbides and alloy elements in gradient nanostructured 32Cr2Mo1VE steel on nitrogen atom diffusion

Effect of Plasma Cladding Speed on the Microstructure and Properties of ZrC-ZrB2/NiAl Coating

温轧TWIP钢芯三层板的组织和力学性能

金属材料专业的焊接实践课程教学改革

Fabrication of Cu-ZrO2 composites by in situ oxidation of liquid Cu–Zr alloy

Study on corrosion behavior of TWIP steel and properties of surface electroless Ni-P coatings

气体催化渗氮对12Cr1MoV钢力学性能的影响

焊接方法与设备之《高能密度焊》讲解

三元相图立体模型的设计及3D打印制作

Green preparation of copper/microalloyed gradient coating on crankshaft surface with improved wear resistance

Effect of SiC addition on the microstructures and wear resistance of ZrB2-ZrC reinforced Ni-based composite coatings

Residual stresses and wear properties of induction-hardened medium carbon steel

Abrasive resistance and corrosion properties of AISI 316 sieve via low-temperature gaseous nitriding

Microstructure and Wear Resistance of ZrC-ZrB2 /Ni Composite Coatings Prepared by Plasma Transferred Arc Cladding

变速器定子齿轮渗碳、渗氮硬化表面耐磨性研究

HT250刹车盘气体渗氮耐磨性研究

《焊接方法与设备》教学改革与实践

铸造合金及其熔炼课程教学模式的改革

提高铸造工艺学课程教学质量的几点措施

AISI 316L不锈钢热处理表面贫铬分析与质量控制

强化材料类专业实践教学改革培养高素质创新应用复合人才

金属材料腐蚀与防护实践教学改革初探

Glass Forming Ability and Crystallization Kinetics of Cu-Zr-Al-(Y, Ag) Amorphous Alloy

Green preparation of silver coating on AISI 304 stainless steel surface by Ag nanocrystalline in-situ growth and the wear resistance

Improvement in dry-sliding wear properties and corrosion resistance of AISI 304 steel with low temperature gaseous nitriding

凹槽类零件漏磁控制感应淬火

Effect of the microstructure and residual stress on tribological behavior of induction hardened GCr15 steel

Influence of Heat Treatment on γ´ Phase and Property of a Directionally Solidified Superalloy

稀土氧化物弥散强化铜基复合材料的制备技术

预处理组织对20CrMnMo钢气体渗氮耐磨性的影响

Effect of compositions on the microstructure and properties of plasma clad NiAl coating

Influence of microstructures on thermal fatigue property of a nickel-base superalloy

Cerium addition on pitting corrosion of (Cu50Zr50)100–2xCe2x(x=0, 1, 2 and 3) metallic glasses in seawater

Effect of Notch Radius on the Thermal Fatigue Property of a New Guide Vane Materials

Study on Corrosion Resistance of Several Fe-Based Amorphous Alloys

Improving wear resistance of magnesium by droplet spraying of Al-Si alloy

Droplet spraying of aluminum on magnesium

AZ91表面熔滴涂覆Al涂层的研究

26Cr2Ni4MoV转子钢晶粒细化研究

Preparation of Mg-Cu-Y and Mg-Ni-Gd Based Amorphous Brazing Material

The Microalloying Effects in Cu-Based Bulk Metallic Glasses

微量元素对Cu-Zr-Al系非晶合金性能的影响

Cu-Zr基块体非晶合金的研究进展

复杂曲面结构凸轮槽高频感应淬火工艺及组织与性能

会议论文

海洋大气环境下稀土耐候钢的腐蚀行为及耐蚀性能研究

预印本

The Creep Behavior and Fracture Mechanism of 282 Superalloy

The Effect of the Alloy Elements in Gradient Nanostructured Aisi 316l Stainless Steel on Gas Nitriding

研究方向