李鹏飞｜江苏大学｜学者主页

2026

不同沉积顺序的TC4-TA15异质界面拉伸磨损性能分析

李鹏飞，王赛兰，李亮亮，吴嘉诚，沈毅鸣，刘丽萍

《中国激光》

2026

电子束双线自由成形原位合成TA1/Ti64新合金电化学腐蚀行为研究

李鹏飞，沈毅鸣，李亮亮，王长雨，黄宁，刘丽萍，沈春根，鲁金忠

《机械工程学报》

2026

Microstructure and mechanical properties of heterogeneous honeycomb structures fabricated by powder extrusion printing

Pengfei Li, Zhenkun Dong, Hao Xu, Minghui Hu, Dehai Kong

Journal of Mechanical Science and Technology

DOI

2026

Study on the Electrochemical Corrosion Behavior of In Situ Synthesized TA1/Ti64 New Alloy through Dual-wire Electron Beam Freedom Fabrication

Pengfei Li, Yiming Shen, LI Liangliang, Changyu Wang, HUANG Ning, Liping Liu, SHEN Chungen, 鲁金忠 Lu Jinzhong

Journal of Mechanical Engineering

DOI

2026

Dual-phase plastic deformation and corrosion resistance enhancement in martensitic stainless steel induced by high-intensity static magnetic field assisted laser shock peening

Changyu Wang, Lujie Xu, C J Li, Zelin Xiao, Pengfei Li, Tianyi Zhang

Corrosion Science

DOI

2026

Dependence of tribological behavior on substrate microstructure in laser surface textured TA15 titanium alloy

Yuchun Peng, Yuhang Wang, Liangliang Li, Xiaoming Bi, Yunguang Zhou, Pengfei Li

Applied Physics A

DOI

2025

超高速激光熔覆AISI 431不锈钢微观组织与耐磨性研究

徐嘉伟，李鹏飞，曹畅，胡明辉，徐昊，孔德海

《制造技术与机床》

2025

Ultrasonic surface rolling process for improving fatigue crack propagation resistance of laser-clad TC4-TA15 titanium alloy

Pengfei Li, Sailan Wang, Jiacheng Wu, Yiming Shen, Zhenkun Dong, Hao Xu

Surface and Coatings Technology

DOI

2025

Thermal corrosion behavior of TA1/TC4 titanium alloy fabricated by electron beam dual-wire additive manufacturing in a mixed salt of NaCl and Na₂SO₄

Pengfei Li, Jiacheng Wu, Yiming Shen, Sailan Wang, Jingjing Zhang, Liping Liu, Liping Liu, Yuchun Peng, Yongbing Chen, Yongbing Chen

Applied Physics A

DOI

2025

Study on High-Temperature Tensile Properties and Microstructure of Electron Beam Dual-Wire Additive Manufactured TA1/TC4 Titanium Alloy

Jiacheng Wu, Pengfei Li, Liangliang Li, L. L. Wang, Liping Liu, Yiming Shen, Sailan Wang

Journal of Materials Engineering and Performance

DOI

2025

Effect of Laser Shock Peening Times on Low-Cycle Fatigue Properties and Fracture Mechanism of Additive TA15 Titanium Alloy

Xu Pei, Sailan Wang, Zhaomei Xu, Zhouzhi Gu, Yuchun Peng, Pengfei Li

Materials

DOI

2025

High-Temperature Oxidation Behavior of a New Type of Ti-3Al-2V Titanium Alloy at 450 and 750 °C

Pengfei Li, Jiacheng Wu, Yiming Shen, Sailan Wang, Jingjing Zhang, Liping Liu, Yuchun Peng, Yongbing Chen

Journal of Materials Engineering and Performance

DOI

2025

Effect of TiB2 additions on the microstructure and mechanical properties of LPBF 2195 Al-Li alloy

Yuxuan Wang, Junling Wu, Li Li, Lei Huang, Yu Zhang, Chenyang Geng, Xu He, Xiankai Meng, Hongmei Zhang, Pengfei Li, Shuping Huang, Jianzhong Zhou

Materials Today Communications

DOI

2025

Improving the corrosion resistance and wear resistance of carbon steel by laser shock peening and shot peening

Pengfei Li, Yiming Shen, Zheng Hua, Jiacheng Wu, Sailan Wang, Jingjing Zhang

Tribology International

DOI

2025

The Influence of Laser Shock Peening on the Microstructure and Mechanical Properties of AH32 Steel

Xu Pei, Yiming Shen, Zhaomei Xu, Pengfei Li, Yuchun Peng

Materials

DOI

2025

Analysis of High Temperature Oxidation Process and Mechanism of Heterogeneous Titanium Alloy

Xu Pei, Jiacheng Wu, Zhaomei Xu, Pengfei Li

Crystals

DOI

2025

Obvious corrosion resistance of 2Cr13 martensitic stainless steel subjected to thermo-mechanical laser shock peening and subsequent slight polishing

Changyu Wang, Qianwei ZHANG, Lujie Xu, Liangliang Li, Weiwei DENG, Tianyi ZHANG, Yang Liu, Gang XU, Liping Liu, Pengfei Li

Chinese Journal of Aeronautics

DOI

2025

Effect of Ultralow‐Temperature Extreme Service Conditions on the Plasticity of TA15 Titanium Alloy for Aeronautics

Pengfei Li, Yuhang Wang, Liangliang Li, Hao Xu, Hao Wang, Liping Liu, Maojie Lin

Advanced Engineering Materials

DOI

2025

Improvement in electrochemical and long-term immersion corrosion resistance of AH32 marine steel using laser shock peening

Pengfei Li, Yiming Shen, Zheng Hua, Liping Liu, Jiacheng Wu, Sailan Wang, Shuanghua Zhu

Surfaces and Interfaces

DOI

2025

Laser Additive Manufactured V-Shaped and L-Shaped Ti65 Titanium Alloy Interfaces and High-Temperature Performance

Liping Liu, Xiaodan Li, Jun Li Yin, Changyu Wang, Jingjing Zhang, Pengfei Li

Journal of Materials Engineering and Performance

DOI

2025

Effect of interlayer ultrasonic rolling on the microstructure and fatigue properties of LPBF 2195 Al-Li alloy

Junling Wu, Ling Dai, Li Li, Xiankai Meng, Pengfei Li, Jianzhong Zhou

Vacuum

DOI

2025

Additive Manufacturing of Ceramic-Reinforced Inconel 718: Microstructure and Mechanical Characterization

Qi Yang, Bo Hu, Lei Wang, Yanwei Ma, Mei Yang, Yihang Ma, Pengfei Li

Crystals

DOI

2025

A discrete element model for analyzing porosity defect evolution in multi-layer laser powder bed fusion of 2195 Al-Li alloy

Ling Dai, Junling Wu, Liqun Li, Xiankai Meng, Hongmei Zhang, Pengfei Li, Shu Tao Huang, Jianzhong Zhou

Journal of Alloys and Compounds

DOI

2025

High-Temperature Tensile Grain Evolution and Mechanical Properties of Additively Manufactured TA15 Aerospace Titanium Alloy

Pengfei Li, Zhenkun Dong, Qingtao Yang, Hao Xu, Dehai Kong, Minghui Hu

Metals

DOI

2025

Microstructure evolution of 2205 duplex stainless steel (DSS) and inconel 718 dissimilar welded joints and impact on corrosion and mechanical behavior

Yiming Shen, L. L. Wang, Liangliang Li, Liangliang Li, Dehai Kong, Ruyu Ma, Liping Liu, Pengfei Li

Materials Science and Engineering A

DOI

2025

Simulation and experimental investigation on auto-coupled laser-electrochemical hybrid machining of metallic micro-holes

Yang Liu, Fuzhengao Wang, Pengfei Ouyang, Zhaoyang Zhang, Wei Xue, Yan Cai, Pengfei Li, Xiankai Meng, Jie Cai, Kaibo Xia

Optics & Laser Technology

DOI

2024

数控高速铣削钛铝合金微观组织与表面质量试验研究

李玉炜，路冬，李亮亮，李鹏飞

《工具技术》

2024

不同环境下激光抛光（FeCoNi）86Al7Ti7高熵合金表面粗糙度分析

李鹏飞，毛永明，王雨航，张志强，李亮亮，徐昊，孔德海

《铜业工程》

2024

面向增材制造产业材料研发与制造人才培养的探索与实践

李鹏飞，银锐明，蹇海根，阳建君

《工业和信息化教育》

2024

皮秒/纳秒脉冲激光抛光对激光选区熔化TC4表面完整性影响

李亮亮，牟建伟，刘艳梅，徐继文，李金龙，李鹏飞，黄舒

《中国表面工程》

2024

Preparation of TC4-TA15 Bimetallic Materials by Laser Melting Deposition: Microstructure and Mechanical Properties at the Interfacial Union

Pengfei Li, Sailan Wang, Xiaodan Li, Jun Yin, HaoZheng Gao, Xiaojie Xiang

JOM

DOI

2024

Analysis of Room-Temperature/High-temperature High-Cycle Fatigue Performance of Laser Additive Manufactured Ti65 Titanium Alloy

Jun Yin, Pengfei Li, Xiaodan Li, Guan Feng, Jiacheng Wu, Sailan Wang, Guang Yang

Journal of Materials Engineering and Performance

DOI

2024

Microstructure and Mechanical Properties of Bimetallic Materials Containing Ceramic Particles Made Using Directed Energy Deposition

Pengfei Li, Qingtao Yang, Jun Yin, Yuchun Peng, Zhiqiang Zhang, Ruitao Li, Jinzhong Lu

Journal of Materials Engineering and Performance

DOI

2024

Effect of ultrasonic surface rolling on the microstructure and mechanical properties of 2195 Al-Li alloy fabricated by laser powder bed fusion in various build directions

Li Li, Lei Huang, Junling Wu, Ling Dai, Xiankai Meng, Hongmei Zhang, Pengfei Li, Shuping Huang, Jianzhong Zhou

Journal of Alloys and Compounds

DOI

2024

Influence of scanning strategies on microstructure and mechanical properties of laser powder bed fusion 2195 Al-Li alloy

Junling Wu, Li Li, Ling Dai, Wei Zhang, Lei Huang, Xiankai Meng, Hongmei Zhang, Pengfei Li, Shuping Huang, Jianzhong Zhou

Journal of Alloys and Compounds

DOI

2024

Research on Microstructure and High-Temperature Performance of Novel Ti65 Titanium Alloy with V-Groove Connection in Laser Additive Manufacturing

Jun Yin, Xiaodan Li, Guan Feng, Pengfei Li, Guang Yang

Transactions of the Indian Institute of Metals

DOI

2024

Analysis of machinability in milling of high-strength brittle thin plates of γ-TiAlNb intermetallic compound

Liangliang Li, Yongliang Zhang, Jianwei Mu, Jiwen Xu, Jianguo Zhao, Pengfei Li, Zhifeng Liu

Journal of Mechanical Science and Technology

DOI

2024

Research status of laser powder bed fusion Al–Li alloys and its improvement measures

Li Li, Xiankai Meng, Hongmei Zhang, Pengfei Li, Shu Tao Huang, Jianzhong Zhou

Journal of Materials Research and Technology

DOI

2024

High-temperature oxidation behavior of TA15 aerospace titanium alloy at 500 °C and 800 °C

Wen Zhong, Kui Yu, Jipeng Shi, Yiming Shen, Pengfei Li, Jinzhong Lu

Journal of Materials Research and Technology

DOI

2024

Microstructure and room/high-temperature tensile properties of γ-TiAlNb intermetallic compound subjected to heat treatment

Liangliang Li, Yongliang Zhang, Xin Pan, Jianwei Mu, Pengfei Li, Zhifeng Liu

Intermetallics

DOI

2024

Laser peening without coating fabricated superhydrophobic aluminum alloy with favorable mechanical properties

Yanqiang Gou, Jianzhong Zhou, Li Li, Pengfei Li, Xiankai Meng, Shu Tao Huang

Materials Today Communications

DOI

2024

Microstructure Evolution and Mechanical Properties of High Nb-TiAl Intermetallic Compounds during Heat Treatment

Liangliang Li, Yongliang Zhang, Jianwei Mu, Jinlong Li, Pengfei Li, Jing Li, Zhifeng Liu

Journal of Materials Engineering and Performance

DOI

2023

Inconel 718高温合金增减材复合制造各向异性及切削温度影响分析

刘欢，刘彬，李亮亮，刘静，李鹏飞

《工具技术》

2023

Effect of hatch spacing on the characteristics of LPBF 2195 Al-Li alloy

Li Li, Yanqiang Gou, Wei Zhang, Xiankai Meng, Hongmei Zhang, Pengfei Li, Shu Tao Huang, Jianzhong Zhou

Journal of Alloys and Compounds

DOI

2023

Study on surface quality of ultrasonic assisted underwater laser polishing

Pengfei Li, Bin Liu, Liangliang Li, Yadong Gong, Jianzhong Zhou, Jinzhong Lu

Journal of Materials Research and Technology

DOI

2023

Study on tool wear during hybrid laser additive and milling subtractive manufacturing

Liangliang Li, Xin Pan, Biao Liu, Pengfei Li, Zhifeng Liu

The International Journal of Advanced Manufacturing Technology

DOI

2023

Microstructure and Performance Research on Ceramic-Enhanced Inconel 718 Matrix Composite Using Laser Additive Manufacturing

Qingtao Yang, XU Ze-wei, Liangliang Li, Pengfei Li

Metals

DOI

2023

Preparation of 2024-T351 aluminum alloy superhydrophobic surface by laser peening without absorption layer and without confinement layer

Yanqiang Gou, Jianzhong Zhou, Li Li, Gaoqiang Jiang, Pengfei Li, Xiankai Meng, Shuping Huang

Vacuum

DOI

2023

Strength and Toughness of Hot-Rolled TA15 Aviation Titanium Alloy after Heat Treatment

Liangliang Li, Xin Pan, Biao Liu, Bin Liu, Pengfei Li, Zhifeng Liu

Aerospace

DOI

2023

Subsurface deformation and burr formation in nickel-based single-crystal superalloy under grinding

Chunyou Liang, Yadong Gong, Pengfei Li, Jingyu Sun, Liya Jin, Guoqiang Yin, Xuelong Wen, Bo Xin

Archives of Civil and Mechanical Engineering

DOI

2023

Microstructure evolution and mechanical properties of in situ synthesized ceramic reinforced 316L/IN718 matrix composites

Pengfei Li, Qingtao Yang, Liangliang Li, Yadong Gong, Jianzhong Zhou, Jinzhong Lu

Journal of Manufacturing Processes

DOI

2023

Ablation oxidation and surface quality during laser polishing of TA15 aviation titanium alloy

Pengfei Li, Yuhang Wang, Liangliang Li, Yadong Gong, Jianzhong Zhou, Jinzhong Lu

Journal of Materials Research and Technology

DOI

2023

Mechanical properties and microstructure characteristics of 2024-T351 aluminum alloy specimen subjected to paint removal by laser cleaning

Qi Sun, Jianzhong Zhou, Xiankai Meng, Pengfei Li

Vacuum

DOI

2023

Effects of WC Particles on the Microstructure of IN718/WC Composite Coatings Fabricated by Laser Cladding: A Two-Dimensional Phase-Field Study

Yixin Wang, Jianzhong Zhou, Teng Zhang, Pengfei Li, Hao Zhu, Xiankai Meng

Coatings

DOI

2023

Ultrasonic-Induced Grain Refinement in Laser Cladding Nickel-Based Superalloy Reinforced by WC Particles

Jizhuang Wang, Jianzhong Zhou, Teng Zhang, Xiankai Meng, Pengfei Li, Shu Tao Huang, Hao Zhu

Coatings

DOI

2022

Interface Characteristics and Mechanical Properties of Post-treated Directed Energy Deposition Laminated Composites

Jing Liu, Pengfei Li, Yanyan Huai, Yadong Gong, Jianzhong Zhou, Jinzhong Lu

Journal of Materials Engineering and Performance

DOI

2022

In situ measurement and numerical simulation on deformation in laser depositing Inconel 718

Gang Yang, Bin Liu, Liangliang Li, Pengfei Li, Xiankai Meng, Zhaomei Xu, Jianzhong Zhou

Journal of the Brazilian Society of Mechanical Sciences and Engineering

DOI

2022

Effect of hybrid ultrasonic-electromagnetic field on cracks and microstructure of Inconel 718/60%WC composites coating fabricated by laser cladding

Teng Zhang, Jianzhong Zhou, Jizhuang Wang, Xiankai Meng, Pengfei Li, Shu Tao Huang, Hao Zhu

Ceramics International

DOI

2022

Dynamic simulation whole process optimization and experimental verification of milling aviation aluminum alloy aircraft structure

Genlin Mo, Jing Liu, Liangliang Li, Pengfei Li, Yadong Gong, Jianzhong Zhou, Jinzhong Lu

The International Journal of Advanced Manufacturing Technology

DOI

2022

Preparation of 2024-T351 aluminum alloy super-hydrophobic surface by laser shock/etching

Yanqiang Gou, Jianzhong Zhou, Pengfei Li, Xiankai Meng, Shu Tao Huang, Yu Zhang

Applied Physics A

DOI

2022

A novel hybrid ultrasonic and electromagnetic field assisted laser cladding: Experimental study and synergistic effects

Teng Zhang, Jianzhong Zhou, Jie Lv, Xiankai Meng, Pengfei Li, Shu Tao Huang

Journal of Materials Processing Technology

DOI

2022

In-situ and off-line deformations of cylindrical walls manufactured by directed energy deposition with different dwell times

Pengfei Li, Jing Liu, Jianzhong Zhou, Aixin Feng, Yadong Gong, Jinzhong Lu, Xiankai Meng

Measurement

DOI

2022

Simulations and Experiments on the Micro-Milling Process of a Thin-Walled Structure of Al6061-T6

Qi Sun, Jianzhong Zhou, Pengfei Li

Materials

DOI

2022

Microstructure and mechanical properties of in-situ synthesized Ti(N,C) strengthen IN718/1040 steel laminate by directed energy deposition

Pengfei Li, Jing Liu, Bin Liu, Li Li, Jianzhong Zhou, Xiankai Meng, Jinzhong Lu

Materials Science and Engineering A

DOI

2022

Microstructure and Wear Properties of IN718/WC Composite Coating Fabricated by Ultrasonic Vibration-Assisted Laser Cladding

Jie Lv, Jianzhong Zhou, Teng Zhang, Xiankai Meng, Pengfei Li, Shu Tao Huang

Coatings

DOI

2022

Effect of Electromagnetic Field on Wear Resistance of Fe901/Al2O3 Metal Matrix Composite Coating Prepared by Laser Cladding

Yaobang Chen, Jianzhong Zhou, Pengfei Li, Kun Huo, Xiankai Meng

Materials

DOI

2022

Investigating the effect of the scanning speed on the characteristics of Al-Li alloy fabricated by selective laser melting

Li Li, Xiankai Meng, Shu Tao Huang, Hui Wang, Pengfei Li, Jianzhong Zhou

Journal of Manufacturing Processes

DOI

2022

Numerical simulation and solidification characteristics for laser cladding of Inconel 718

Chuanyu Wang, Jianzhong Zhou, Teng Zhang, Xiankai Meng, Pengfei Li, Shu Tao Huang

Optics & Laser Technology

DOI

2021

激光熔覆突变梯度材料界面特征研究

李鹏飞，巩亚东，周建忠，鲁金忠，孟宪凯，黄舒，吕建忠

《激光与光电子学进展》

2021

Influence of depositing sequence and materials on interfacial characteristics and mechanical properties of laminated composites

Pengfei Li, Jianzhong Zhou, Liangliang Li, Yadong Gong, Jinzhong Lu, Xiankai Meng, Teng Zhang

Materials Science and Engineering A

DOI

2021

Cracks Analysis of Graded Structural Material Fabricated by Hybrid Additive and Subtractive Manufacturing

Pengfei Li, Jianzhong Zhou, Liangliang Li, Xiankai Meng, Shu Tao Huang, Jinzhong Lu, Aixin Feng

JOM

DOI

2021

Effect of post-heat treatment on the microstructure and mechanical properties of laser metal deposition Inconel 718

Pengfei Li, Jianzhong Zhou, Yadong Gong, Xiankai Meng, Jinzhong Lu

Journal of Mechanical Science and Technology

DOI

2021

Tensile fracture behavior of 316L stainless steel components fabricated with hybrid directed energy deposition and thermal milling manufacturing

Pengfei Li, Jianzhong Zhou, Liangliang Li, Teng Zhang, Yanqiang Gou, Xiankai Meng, Jianzhong Lyu

Applied Physics A

DOI

2021

Microstructure evolution of laser cladding Inconel 718 assisted hybrid ultrasonic-electromagnetic field

Teng Zhang, Pengfei Li, Jianzhong Zhou, Chuanyu Wang, Xiankai Meng, Shu Tao Huang

Materials Letters

DOI

2016

基于国产装备的钛合金TC4高效铣削试验研究

李亮亮，李鹏飞，杜宝瑞，初宏震

《制造技术与机床》

精选作品

期刊论文

不同沉积顺序的TC4-TA15异质界面拉伸磨损性能分析

电子束双线自由成形原位合成TA1/Ti64新合金电化学腐蚀行为研究

Microstructure and mechanical properties of heterogeneous honeycomb structures fabricated by powder extrusion printing

Study on the Electrochemical Corrosion Behavior of In Situ Synthesized TA1/Ti64 New Alloy through Dual-wire Electron Beam Freedom Fabrication

Dual-phase plastic deformation and corrosion resistance enhancement in martensitic stainless steel induced by high-intensity static magnetic field assisted laser shock peening

Dependence of tribological behavior on substrate microstructure in laser surface textured TA15 titanium alloy

超高速激光熔覆AISI 431不锈钢微观组织与耐磨性研究

Ultrasonic surface rolling process for improving fatigue crack propagation resistance of laser-clad TC4-TA15 titanium alloy

Thermal corrosion behavior of TA1/TC4 titanium alloy fabricated by electron beam dual-wire additive manufacturing in a mixed salt of NaCl and Na₂SO₄

Study on High-Temperature Tensile Properties and Microstructure of Electron Beam Dual-Wire Additive Manufactured TA1/TC4 Titanium Alloy

Effect of Laser Shock Peening Times on Low-Cycle Fatigue Properties and Fracture Mechanism of Additive TA15 Titanium Alloy

High-Temperature Oxidation Behavior of a New Type of Ti-3Al-2V Titanium Alloy at 450 and 750 °C

Effect of TiB2 additions on the microstructure and mechanical properties of LPBF 2195 Al-Li alloy

Improving the corrosion resistance and wear resistance of carbon steel by laser shock peening and shot peening

The Influence of Laser Shock Peening on the Microstructure and Mechanical Properties of AH32 Steel

Analysis of High Temperature Oxidation Process and Mechanism of Heterogeneous Titanium Alloy

Obvious corrosion resistance of 2Cr13 martensitic stainless steel subjected to thermo-mechanical laser shock peening and subsequent slight polishing

Effect of Ultralow‐Temperature Extreme Service Conditions on the Plasticity of TA15 Titanium Alloy for Aeronautics

Improvement in electrochemical and long-term immersion corrosion resistance of AH32 marine steel using laser shock peening

Laser Additive Manufactured V-Shaped and L-Shaped Ti65 Titanium Alloy Interfaces and High-Temperature Performance

Effect of interlayer ultrasonic rolling on the microstructure and fatigue properties of LPBF 2195 Al-Li alloy

Additive Manufacturing of Ceramic-Reinforced Inconel 718: Microstructure and Mechanical Characterization

A discrete element model for analyzing porosity defect evolution in multi-layer laser powder bed fusion of 2195 Al-Li alloy

High-Temperature Tensile Grain Evolution and Mechanical Properties of Additively Manufactured TA15 Aerospace Titanium Alloy

Microstructure evolution of 2205 duplex stainless steel (DSS) and inconel 718 dissimilar welded joints and impact on corrosion and mechanical behavior

Simulation and experimental investigation on auto-coupled laser-electrochemical hybrid machining of metallic micro-holes

数控高速铣削钛铝合金微观组织与表面质量试验研究

不同环境下激光抛光（FeCoNi）86Al7Ti7高熵合金表面粗糙度分析

面向增材制造产业材料研发与制造人才培养的探索与实践

皮秒/纳秒脉冲激光抛光对激光选区熔化TC4表面完整性影响

Preparation of TC4-TA15 Bimetallic Materials by Laser Melting Deposition: Microstructure and Mechanical Properties at the Interfacial Union

Analysis of Room-Temperature/High-temperature High-Cycle Fatigue Performance of Laser Additive Manufactured Ti65 Titanium Alloy

Microstructure and Mechanical Properties of Bimetallic Materials Containing Ceramic Particles Made Using Directed Energy Deposition

Effect of ultrasonic surface rolling on the microstructure and mechanical properties of 2195 Al-Li alloy fabricated by laser powder bed fusion in various build directions

Influence of scanning strategies on microstructure and mechanical properties of laser powder bed fusion 2195 Al-Li alloy

Research on Microstructure and High-Temperature Performance of Novel Ti65 Titanium Alloy with V-Groove Connection in Laser Additive Manufacturing

Analysis of machinability in milling of high-strength brittle thin plates of γ-TiAlNb intermetallic compound

Research status of laser powder bed fusion Al–Li alloys and its improvement measures

High-temperature oxidation behavior of TA15 aerospace titanium alloy at 500 °C and 800 °C

Microstructure and room/high-temperature tensile properties of γ-TiAlNb intermetallic compound subjected to heat treatment

Laser peening without coating fabricated superhydrophobic aluminum alloy with favorable mechanical properties

Microstructure Evolution and Mechanical Properties of High Nb-TiAl Intermetallic Compounds during Heat Treatment

Inconel 718高温合金增减材复合制造各向异性及切削温度影响分析

Effect of hatch spacing on the characteristics of LPBF 2195 Al-Li alloy

Study on surface quality of ultrasonic assisted underwater laser polishing

Study on tool wear during hybrid laser additive and milling subtractive manufacturing

Microstructure and Performance Research on Ceramic-Enhanced Inconel 718 Matrix Composite Using Laser Additive Manufacturing

Preparation of 2024-T351 aluminum alloy superhydrophobic surface by laser peening without absorption layer and without confinement layer

Strength and Toughness of Hot-Rolled TA15 Aviation Titanium Alloy after Heat Treatment

Subsurface deformation and burr formation in nickel-based single-crystal superalloy under grinding

Microstructure evolution and mechanical properties of in situ synthesized ceramic reinforced 316L/IN718 matrix composites

Ablation oxidation and surface quality during laser polishing of TA15 aviation titanium alloy

Mechanical properties and microstructure characteristics of 2024-T351 aluminum alloy specimen subjected to paint removal by laser cleaning

Effects of WC Particles on the Microstructure of IN718/WC Composite Coatings Fabricated by Laser Cladding: A Two-Dimensional Phase-Field Study

Ultrasonic-Induced Grain Refinement in Laser Cladding Nickel-Based Superalloy Reinforced by WC Particles

Interface Characteristics and Mechanical Properties of Post-treated Directed Energy Deposition Laminated Composites

In situ measurement and numerical simulation on deformation in laser depositing Inconel 718

Effect of hybrid ultrasonic-electromagnetic field on cracks and microstructure of Inconel 718/60%WC composites coating fabricated by laser cladding

Dynamic simulation whole process optimization and experimental verification of milling aviation aluminum alloy aircraft structure

Preparation of 2024-T351 aluminum alloy super-hydrophobic surface by laser shock/etching

A novel hybrid ultrasonic and electromagnetic field assisted laser cladding: Experimental study and synergistic effects

In-situ and off-line deformations of cylindrical walls manufactured by directed energy deposition with different dwell times

Simulations and Experiments on the Micro-Milling Process of a Thin-Walled Structure of Al6061-T6

Microstructure and mechanical properties of in-situ synthesized Ti(N,C) strengthen IN718/1040 steel laminate by directed energy deposition

Microstructure and Wear Properties of IN718/WC Composite Coating Fabricated by Ultrasonic Vibration-Assisted Laser Cladding

Effect of Electromagnetic Field on Wear Resistance of Fe901/Al2O3 Metal Matrix Composite Coating Prepared by Laser Cladding

Investigating the effect of the scanning speed on the characteristics of Al-Li alloy fabricated by selective laser melting

Numerical simulation and solidification characteristics for laser cladding of Inconel 718

激光熔覆突变梯度材料界面特征研究

Influence of depositing sequence and materials on interfacial characteristics and mechanical properties of laminated composites

Cracks Analysis of Graded Structural Material Fabricated by Hybrid Additive and Subtractive Manufacturing

Effect of post-heat treatment on the microstructure and mechanical properties of laser metal deposition Inconel 718

Tensile fracture behavior of 316L stainless steel components fabricated with hybrid directed energy deposition and thermal milling manufacturing

Microstructure evolution of laser cladding Inconel 718 assisted hybrid ultrasonic-electromagnetic field

基于国产装备的钛合金TC4高效铣削试验研究

研究方向