李润霞｜东莞理工学院｜学者主页

2026

利用微量稀土元素提高选区激光熔融成型Al-Si合金的力学性能

施其锋，杨涛，齐亮，郝静妍，吴惠舒，李润霞

《材料导报》

2026

Selective laser melting of bimodal-structured 2024Al alloy with enhanced strength-ductility synergy through duplex reinforcements

Guo-Feng Liu, Runxia Li, Wanlin Li, Zheyu Yang, Zhen-Min Wang, Biao Wang

Materials Science & Engineering: A

DOI

2026

Influence of Spark Plasma Sintering Time on the Microstructure and Properties of High-Silicon–Aluminum Composite Materials

Zhaoyang Kong, Runxia Li, Di Ran

Coatings

DOI

2026

Short-duration T6 treatment for microstructural homogenization and anisotropy reduction in LPBFed AlSi10Mg alloy

Jianfei Hao, Caijun Shen, Fuzhu Wang, Han Gao, Shaofei Liu, Xingde Zhao, Shaoxuan Huang, Haoyu Sun, Bin Chen, Runxia Li

Journal of Alloys and Compounds

DOI

2026

Microstructure regulation and strengthening of a cast Al-Zn-Si-Cu alloy by Er/Mg microalloying and solution treatment

Jianfei Hao, J F Xu, Lei Shi, S M Liu, Runxia Li

Journal of Alloys and Compounds

DOI

2026

Texture Evolution and In Situ Investigation of Recrystallization Behavior in a Hot-Rolled Al-Zn-Mg-Cu-Zr Alloy

Peng Xia, Kedu Lin, Yiwen Hu, Jianfei Hao, Runxia Li, Huang Huilan

Materials

DOI

2026

Formation quality, microstructure and anisotropic mechanical properties of pure Zn fabricated by laser powder bed fusion

Chun Chen, Wenjie Zheng, Zhenmin Wang, Zhenmin Wang, Runxia Li, Biao Wang

Materials Science and Engineering A

DOI

2025

Synergistic deformation of bimodal-structured AZ80 Mg alloy for excellent strength-ductility synergy via regulating the heterogeneity level

Guo-Feng Liu, Runxia Li, Biao Wang, Zhen-Min Wang, Hongfei Zhang

Journal of Magnesium and Alloys

DOI

2025

Mechanical properties and microstructure evolutions of the SLM fabricated Al-Mg-Mn-Sc-Zr alloy when deforming at elevated temperatures

Mengmeng Tong, Chun Chen, Jingbo Zhu, Zhiping Chen, Jianfei Hao, Runxia Li, Biao Wang

Materials Characterization

DOI

2025

Delayed precipitation of S′ phases and accelerated fatigue crack propagation induced by coarsened grain boundary precipitates in an Al-Cu-Li alloy

Peng Xia, Yiwen Hu, Mengmeng Tong, Jianfei Hao, Runxia Li, Biao Wang

Materials Characterization

DOI

2025

Influences of trace additions of Sc/Zr elements on high-temperature tensile behaviors of the Al-Mg-Mn alloys

Mengmeng Tong, Jianan Yang, Peng Xia, Runxia Li, Feng Jiang

Journal of Alloys and Compounds

DOI

2025

Effect of Direct Ageing and Stress Relief Annealing on the Microstructure and Properties of Laser Selective Melting AlSi10Mg

Fuzhu Wang, Bin Chen, Zhiping Chen, Mengmeng Tong, Shiming Ren, Zhipeng Wang, Peng Cheng Xia, Jingbo Zhu, Runxia Li

Metals and Materials International

DOI

2025

Microstructure evolution and aging strengthening behavior of in-situ TiC nano-reinforced Al-Si-Cu-Mg alloy

Jianfei Hao, Chun Chen, Yuliang Zhao, Mengmeng Tong, Dandan Zhao, Yubin Ke, Gang Liu, Runxia Li, Biao Wang

Materials Characterization

DOI

2025

Repelling effect of Si on Cu atoms enhances the strength and ductility of Al alloys: Atom probe tomography and first-principles analysis

Jianfei Hao, Jun Hui, Runxia Li, Chunying Chen, Biao Wang

Materials Science and Engineering A

DOI

2024

热处理对压铸Mg-Zn-Al-Mn合金组织及性能的影响

孙金钊，夏鹏，李润霞，张留艳

《铸造》

2024

回归再时效热处理对7046铝合金显微组织与性能的影响

黎凡夫，夏鹏，陈斌，项胜前，朱世安，张留艳，李润霞

《特种铸造及有色合金》

DOI

2024

细化变质对免热处理压铸Al-Zn-Si-Cu合金组织及性能的影响

张恩图，郝建飞，夏鹏，陈斌，王志鹏，揭晓华，李润霞

《铸造》

2024

Influence of laser power and scanning speed on microstructure evolutions and mechanical properties of the SLM fabricated Al-Mg-Mn-Sc-Zr alloy

Mengmeng Tong, Huidi Zhang, Chun Chen, Jian-Fei Hao, Zhiping Chen, Fu-Zhu Wang, Runxia Li, Biao Wang

Journal of Materials Research and Technology

DOI

2024

AlMgZnCu hydrogen embrittlement by nanograin boundary decomposition

Jun Hui, Xiaoyong Zhang, Jia-Peng Chen, Min Liu, Xin-Feng Li, Runxia Li, Biao Wang

International journal of hydrogen energy

DOI

2024

Effect of additional solutes on the vacancy-mediated diffusion of Mg in biodegradable Zn-based alloys: A first-principles study

Chun Chen, Wenjie Zheng, Zhen-Min Wang, Runxia Li, Biao Wang

Journal of Materials Research and Technology

DOI

2024

Effect of grain size on tensile deformation behavior of nano-polycrystalline Al and Al–Mg alloys with grain boundary segregation of Mg

Jianjun Chen, Runxia Li, Biao Wang, Gang Liu

Journal of Materials Research and Technology

DOI

2024

Characterization of V-containing black plasma electrolytic oxide coatings on aluminium alloy: Impact of base electrolytes

Jun Liang, Zhen-Jun Peng, Xuejun Cui, Runxia Li, Biao Wang

Journal of Materials Research and Technology

DOI

2024

Insight into the Fe-rich phases strengthening mechanisms of non-heat-treatable Al-Mg-Mn-Fe-Cu alloys

Yu-Liang Zhao, Weixiang He, Fei-Yu Zhao, Chenghao Song, Wei-Wen Zhang, Dong-Won Song, Yue Tang, Zhenzhong Sun, Wen Yin, Yan-Lin Xue, Runxia Li, R. Fernández

Journal of Materials Science & Technology

DOI

2024

Effect of Spark Plasma Sintering Temperature on the Microstructure and Thermophysical Properties of High-Silicon–Aluminum Composites

Zhaoyang Kong, Zhipeng Wang, Yingmin Li, Runxia Li

Coatings

DOI

2023

热处理对Al-10Si-3Cu-0.3Mg-0.2Er合金低温力学性能的影响

张惠帝，马昌龙，郝建飞，吴惠舒，陈斌，陈明，李卫荣，李润霞

《铸造》

2023

Comparison of plasma electrolytic oxidation coatings on Al alloy produced in diluted and concentrated silicate electrolytes for space thermal control application

Jun Liang, Zhen-Jun Peng, Xuejun Cui, Run-Xia Li, Biao Wang

Ceramics International

DOI

2023

Preparation of white ZrO2 coating with low solar absorptance on aluminum alloy by plasma electrolytic oxidation

Jun Liang, Zhen-Jun Peng, Run-Xia Li, Biao Wang

Ceramics International

DOI

2023

Galvanic corrosion behavior of AZ31 Mg alloy coupled with mild steel: effect of coatings

Jun Liang, Siqin Liu, Zhen-Jun Peng, Run-Xia Li, Biao Wang

Journal of Materials Research and Technology

DOI

2023

Effect of solid solution treatment on microstructure and mechanical properties of Al–Si–Cu–Mg alloy prepared by semi-solid squeeze casting

Jianfei Hao, Bin Chen, Peng Cheng Xia, Zhipeng Wang, Zhiping Chen, Runxia Li

International Journal of Metalcasting

DOI

2023

Effect of ultrasonic melt processing and cooling rate on microstructure evolution of Al–Cu–Mn–Mg–Fe–Si alloy

Weixiang He, Yuliang Zhao, Qiuyun Wei, Huan Liu, Dongfu Song, Fanghua Shen, Zhenzhong Sun, Runxia Li

Journal of Materials Research and Technology

DOI

2023

The Synergistic Effect of Trace Ag and Hot Extruding on the Microstructure and Properties of a Biodegradable Mg-Zn-Sr-Ag Alloy

Qifeng Shi, Huishu Wu, Zhixian Gao, Dongsheng Wang, Jingwen Wang, Youwen Yang, Runxia Li

Materials

DOI

2023

Influence of erbium addition on microstructure and performances of AlSi10Mg alloy prepared by selective laser melting

Bin Chen, Fuzhu Wang, Shiming Ren, Peng Cheng Xia, Zhipeng Wang, Jianfei Hao, Zhiping Chen, Runxia Li, Hongxiang Jiang

Journal of Rare Earths

DOI

2023

Effect of Ball Milling Time on the Microstructure and Properties of High-Silicon–Aluminum Composite

Zhaoyang Kong, Zhipeng Wang, Bin Chen, Yingmin Li, Runxia Li

Materials

DOI

2023

Effect of sintering process on microstructure and properties of Al–Si alloy made by powder metallurgy for electronic packaging application

Zhaoyang Kong, Haibin Huang, Yingmin Li, Bao-Yi Yu, Bin Chen, Runxia Li

Materials Research Express

DOI

2023

Effects of Cu/Er on Tensile Properties of Cast Al-Si Alloy at Low Temperature

Huidi Zhang, Bin Chen, Jianfei Hao, Huishu Wu, Ming Chen, Weirong Li, Runxia Li, Biao Wang

Materials

DOI

2022

工艺参数对SLM成形AlSi10Mg合金组织与硬度的影响

邹烜，陈盛贵，陈秋丹，陈斌，陈坤，刘福生，李润霞

《中国铸造装备与技术》

2022

Ag对Mg-4Zn-0.5Sr合金显微组织与力学性能的影响

高志贤，卞建从，陈斌，万鹏，吴慧舒，李卫荣，刘福生，李润霞

《特种铸造及有色合金》

DOI

2022

压铸Al-Zn-Si-Cu合金的力学与导热性能

李正伟，陈明，郝建飞，陈斌，于宝义，李润霞

《特种铸造及有色合金》

DOI

2022

电磁搅拌对挤压Mg-4Zn-0.3Zr合金组织与性能影响

卞健从，郑黎，于宝义，陈斌，吴惠舒，李润霞

《特种铸造及有色合金》

2022

Study of the evolution mechanisms of Fe-rich phases in Al-Si-Fe alloys with Mn modification using synchrotron X-ray imaging

D. Song, Yu-Liang Zhao, Yiwang Jia, Runxia Li, Nan Zhou, Kaihong Zheng, Yanan Fu, Wei-Weng Zhang

Journal of Alloys and Compounds

DOI

2022

Experimental validation of the thermodynamic theory for predicting the strength of 6061 Al alloy with complex loadings

Bin Chen, Jiapeng Chen, Runxia Li, Biao Wang

Engineering Fracture Mechanics

DOI

2021

固溶时间对半固态挤压成形Al-17Si-4Cu-0.5Mg合金组织及力学性能的影响

郝建飞，于宝义，罗惠馨，史原脊，李润霞

《材料工程》

2021

浆料制备工艺对Al-17Si-4Cu-0.5Mg合金组织性能的影响

郝建飞，罗惠馨，史原脊，于宝义，李润霞

《特种铸造及有色合金》

DOI

2021

Nucleation and growth of Fe-rich phases in Al-5Ti-1B modified Al-Fe alloys investigated using synchrotron X-ray imaging and electron microscopy

Yu-Liang Zhao, Wei-Weng Zhang, D. Song, B. Lin, Fang-Hua Shen, Dong-Hai Zheng, Chun-Xiao Xie, Zhenzhong Sun, Yanan Fu, Runxia Li

Journal of Materials Science & Technology

DOI

2021

Influence of embedded reduced graphene oxide on the corrosion-wear performance of cold sprayed Zn-rGO/Al coating in NaCl solution

Hui-Shu Wu, Geng-Zhe Shen, Run-Xia Li, Liu-Yan Zhang, Xiao Jie, Gang Liu

Surface & Coatings Technology

DOI

2020

ZL101A合金低温疲劳性能和断裂行为研究

马昌龙，宋丽英，郑黎，于宝义，李润霞

《铸造》

2020

低频电磁场对半连续铸造Al-Mg-Si-Cu合金显微组织的影响

郝建飞，王顺成，农登，李润霞

《铸造技术》

DOI

2020

Si含量对Al-Si电子封装材料组织和性能的影响

孔昭阳，黄海滨，于宝义，郑黎，李润霞

《特种铸造及有色合金》

DOI

2020

SLM成形和热处理对AlSi10Mg合金组织与性能的影响

闫成鑫，张惠帝，于宝义，李文芳，李卫荣，陈明，李润霞

《特种铸造及有色合金》

DOI

2020

挤压铸造中比压对未变质过共晶Al-Si合金组织性能的影响

荀诗文，邹良利，李润霞

《铸造》

2020

热处理对Mg-Zn-Sr合金组织与性能的影响

姜磊，卞健从，郑黎，于宝义，李卫荣，陈明，王哲英，李润霞

《铸造》

2020

稀土Nd对铸造Al-Si合金低温拉伸断裂行为的影响

李卫荣，马昌龙，姜雄华，孙丽娟，庞栋，李文芳，李润霞

《中国铸造装备与技术》

2019

RE对铸造Al-6Zn-2.5Mg-1.8Cu合金热裂倾向性的影响

马士平，闫成鑫，于宝义，郑黎，李润霞

《特种铸造及有色合金》

DOI

2019

固溶处理对半固态成形过共晶Al-Si-Cu-Mg合金组织与性能的影响

罗惠馨，郝建飞，孔昭阳，袁晓光，于宝义，郑黎，李润霞

《特种铸造及有色合金》

DOI

2019

挤压铸造和热处理对WE43镁合金组织与性能的影响

石文静，卞健从，姜磊，李硕敏，郑黎，于宝义，袁晓光，李润霞

《特种铸造及有色合金》

DOI

2019

冷热循环处理对电磁搅拌AZ91镁合金组织与性能的影响

姜磊，卞健从，魏子程，聂赛男，郑黎，于宝义，李润霞

《特种铸造及有色合金》

DOI

2019

压制模具温度对粉末冶金成型铝硅电子封装材料组织和性能的影响

黄海滨，冀恩龙，于宝义，郑黎，李润霞

《中国铸造装备与技术》

2019

Na变质对ZL101合金低温力学性能的影响

刘昊昕，宋丽英，郑黎，于宝义，胡方，李润霞

《特种铸造及有色合金》

DOI

2018

Sr/P变质处理对挤压铸造Al-17.5Si合金组织与性能的影响

孙海军，罗惠馨，张立军，孙继鸿，李润霞

《铸造》

2018

磁场电流对AZ31镁合金组织与性能的影响

于宝义，霍春影，郑黎，孔跃潼，李润霞

《沈阳工业大学学报》

2018

深冷处理对电磁搅拌AZ91镁合金组织与性能的影响

卞健从，石文静，姜磊，聂赛男，于宝义，郑黎，李润霞

《铸造》

2018

Sr变质对ZL101合金显微组织和低温拉伸性能的影响

宋丽英，刘昊昕，聂赛男，郑黎，于宝义，李润霞

《铸造》

2018

铸造缺陷对ZL101合金断裂行为的影响

马广辉，李润霞，段林

《铸造》

2018

离心铸造对AZ91镁合金组织及力学性能的影响

于宝义，王操，郑黎，朱雪峰，李润霞

《沈阳工业大学学报》

2018

晶粒尺寸对ZL101合金低温拉伸性能的影响

李润霞，宋丽英，刘昊昕，于宝义

《中国铸造装备与技术》

2017

热挤压对挤压过共晶Al-17.5Si合金组织与性能的影响

李润霞，刘兰吉，荀诗文，孙继鸿，史原脊，聂赛男，郑黎，于宝义

《特种铸造及有色合金》

2017

变质处理及挤压铸造对过共晶Al-Si-Cu-Mg合金组织与性能的影响

李润霞，孙继鸿，郝建飞，王顺成，于宝义，李荣德

《铸造》

2017

挤压铸造对过共晶Al-Si-Cu-Mg合金组织与性能的影响

李润霞，刘兰吉，史原脊，孙菊，张立军，郑黎，于宝义

《铸造》

2017

超声波功率对铸轧5182铝合金带坯组织性能的影响

郝建飞，李润霞，王顺成，李继林，甘春雷，宋东福

《有色金属材料与工程》

2016

电磁搅拌对Al-5Ti-B中间合金组织及细化效果的影响

李润霞，张文华，张鹏，张博通，陈建春，于宝义

《铸造》

2016

Si相对铸造Al-Si合金低温拉伸断裂行为的影响

马广辉，李润霞，白彦华，李荣德

《中国有色金属学报》

2016

挤压铸造Al-17.5Si-4Cu-0.5Mg合金热压缩变形行为及其加工图

李润霞，张磊，刘兰吉，张立军，白彦华，李荣德

《热加工工艺》

2016

挤压铸造对Al-Sr中间合金性能及变质效果的影响

李润霞，张鹏，李荣德，于宝义，常保磊，白彦华，郝建飞

《铸造》

2015

Al-17.5Si-4Cu-0.5Mg合金热变形行为及其加工图

李润霞，张磊，刘兰吉，张立军，白彦华，李荣德

《航空材料学报》

2015

固溶处理对挤压铸造Al17.5Si4Cu0.5Mg0.1Mn合金显微组织及硬度的影响

李润霞，张立军，刘兰吉，孙菊，张磊，于宝义

《铸造》

2015

挤压铸造和固态热挤压Al-6Zn-2.5Mg-1.8Cu合金的显微组织和力学性能（英文）

方虹泽，李润霞，陈瑞润，于宝义，曲迎东，荀诗文，李荣德

Transactions of Nonferrous Metals Society of China

2015

低温下ZL101合金的裂纹扩展行为

马广辉，李润霞，白彦华，李荣德

《铸造》

2015

低温下ZL101合金中位错运动对Si相断裂的影响

马广辉，李润霞，白彦华，李荣德

《特种铸造及有色合金》

2014

挤压铸造Al-5.5Fe-4Cu合金组织与性能的研究

李润霞，李青，张磊，佟艳娇，袁晓光，李荣德

《铸造》

2014

基于3DAP及第一性原理的Al-Si-Cu-Mg合金团簇及沉淀演变

田畅，李荣德，李润霞，王瑞春，曲迎东

《特种铸造及有色合金》

2012

热处理工艺对镁合金型材的组织及性能的影响

于宝义，李琦，李润霞，郑文涛

《热加工工艺》

2010

过共晶Al-Si合金的电磁搅拌工艺研究

李润霞，陈玉金，许传恒，袁晓光，李荣德

《铸造》

2009

Cr和Mo对过共晶Al-Si合金组织与性能的影响

李润霞，于洪江，袁晓光，黄宏军，陈玉金

《铸造》

2009

热处理对过共晶Al-Si合金组织与性能的影响

李润霞，于洪江，袁晓光，李荣德

《热加工工艺》

2009

喷射成形新型自由式雾化器的设计研究

古元军，曲迎东，叶正涛，李荣德，袁晓光，李润霞

《铸造》

2009

定向凝固条件下Al-5%Fe过共晶合金的组织演化

李荣德，谢尧，周振平，曹修生，谢懿，李润霞

《铸造》

2009

超高压力作用下ZA27合金晶体结构的变化

李荣徳，曹修生，曲迎东，白彦华，李润霞

《特种铸造及有色合金》

2009

热处理对半固态挤压Al-Fe基合金组织与性能的影响

冯菁菁，袁晓光，李润霞，刘波

《特种铸造及有色合金》

2009

超高压力对ZA27合金力学性能的影响

李荣德，曹修生，曲迎东，谢尧，谢懿，李润霞

《铸造》

2009

超高压力对ZA27合金晶体结构及微观组织的影响

李荣德，曹修生，曲迎东，谢尧，李润霞，田畅

《中国有色金属学报》

2008

稀土对Al-Si-Cu-Mg合金组织和性能的影响

李荣德，何昌国，李润霞，周振平

《铸造》

2008

热挤压工艺对Al-Si合金组织和力学性能的影响

李荣徳，何昌国，李润霞，周振平

《特种铸造及有色合金》

2007

固溶处理对铸造Al-Si-Cu-Mg合金组织与性能的影响

李润霞，李荣德，吕伟，曲迎东，李晨曦

《中国有色金属学报》

2007

稀土Ce对ZA27合金组织和力学性能的影响

李荣德，马立国，李晨希，李润霞

《沈阳工业大学学报》

2006

铸造Al-Si-Cu-Mg合金最佳热处理工艺的研究

李润霞，李晨曦，李荣德

《铸造》

2006

钕对铸造Al-Si-Cu-Mg合金力学性能的影响

李荣德，许国宇，李润霞

《铸造》

2004

Cd对铸造Al-Si-Cu-Mg合金时效过程的影响

李润霞，李荣德，管恒荣，胡壮麒

《金属学报》

2004

可热处理铸造Al-Si系合金时效行为研究

李润霞，李荣德，何立子，李晨曦，胡壮麒

《稀有金属材料与工程》

2004

A354合金热处理制度的人工神经网络模型

李润霞，李荣德，孙海军，刘贵立，李晨曦，胡壮麒

《铸造》

2004

二次枝晶臂间距的研究

李晨希，郭太明，李荣德，李润霞，伞晶超

《铸造》

2003

Al-7%Si凝固组织初生α相的截面组织模拟

李荣德，杨秀英，李润霞，李晨曦

《铸造》

2003

热处理对铸造AlSiCuMg合金硅相形貌及力学性能的影响

李润霞，李荣德，李晨曦，杨秀英，胡壮麒

《材料工程》

2003

高强度铸造Al-Si-Cu-Mg合金时效特性的研究

李润霞，李荣德，杨秀英，李晨曦，胡壮麒

《铸造》

精选作品

期刊论文

利用微量稀土元素提高选区激光熔融成型Al-Si合金的力学性能

Selective laser melting of bimodal-structured 2024Al alloy with enhanced strength-ductility synergy through duplex reinforcements

Influence of Spark Plasma Sintering Time on the Microstructure and Properties of High-Silicon–Aluminum Composite Materials

Short-duration T6 treatment for microstructural homogenization and anisotropy reduction in LPBFed AlSi10Mg alloy

Microstructure regulation and strengthening of a cast Al-Zn-Si-Cu alloy by Er/Mg microalloying and solution treatment

Texture Evolution and In Situ Investigation of Recrystallization Behavior in a Hot-Rolled Al-Zn-Mg-Cu-Zr Alloy

Formation quality, microstructure and anisotropic mechanical properties of pure Zn fabricated by laser powder bed fusion

Synergistic deformation of bimodal-structured AZ80 Mg alloy for excellent strength-ductility synergy via regulating the heterogeneity level

Mechanical properties and microstructure evolutions of the SLM fabricated Al-Mg-Mn-Sc-Zr alloy when deforming at elevated temperatures

Delayed precipitation of S′ phases and accelerated fatigue crack propagation induced by coarsened grain boundary precipitates in an Al-Cu-Li alloy

Influences of trace additions of Sc/Zr elements on high-temperature tensile behaviors of the Al-Mg-Mn alloys

Effect of Direct Ageing and Stress Relief Annealing on the Microstructure and Properties of Laser Selective Melting AlSi10Mg

Microstructure evolution and aging strengthening behavior of in-situ TiC nano-reinforced Al-Si-Cu-Mg alloy

Repelling effect of Si on Cu atoms enhances the strength and ductility of Al alloys: Atom probe tomography and first-principles analysis

热处理对压铸Mg-Zn-Al-Mn合金组织及性能的影响

回归再时效热处理对7046铝合金显微组织与性能的影响

细化变质对免热处理压铸Al-Zn-Si-Cu合金组织及性能的影响

Influence of laser power and scanning speed on microstructure evolutions and mechanical properties of the SLM fabricated Al-Mg-Mn-Sc-Zr alloy

AlMgZnCu hydrogen embrittlement by nanograin boundary decomposition

Effect of additional solutes on the vacancy-mediated diffusion of Mg in biodegradable Zn-based alloys: A first-principles study

Effect of grain size on tensile deformation behavior of nano-polycrystalline Al and Al–Mg alloys with grain boundary segregation of Mg

Characterization of V-containing black plasma electrolytic oxide coatings on aluminium alloy: Impact of base electrolytes

Insight into the Fe-rich phases strengthening mechanisms of non-heat-treatable Al-Mg-Mn-Fe-Cu alloys

Effect of Spark Plasma Sintering Temperature on the Microstructure and Thermophysical Properties of High-Silicon–Aluminum Composites

热处理对Al-10Si-3Cu-0.3Mg-0.2Er合金低温力学性能的影响

Comparison of plasma electrolytic oxidation coatings on Al alloy produced in diluted and concentrated silicate electrolytes for space thermal control application

Preparation of white ZrO2 coating with low solar absorptance on aluminum alloy by plasma electrolytic oxidation

Galvanic corrosion behavior of AZ31 Mg alloy coupled with mild steel: effect of coatings

Effect of solid solution treatment on microstructure and mechanical properties of Al–Si–Cu–Mg alloy prepared by semi-solid squeeze casting

Effect of ultrasonic melt processing and cooling rate on microstructure evolution of Al–Cu–Mn–Mg–Fe–Si alloy

The Synergistic Effect of Trace Ag and Hot Extruding on the Microstructure and Properties of a Biodegradable Mg-Zn-Sr-Ag Alloy

Influence of erbium addition on microstructure and performances of AlSi10Mg alloy prepared by selective laser melting

Effect of Ball Milling Time on the Microstructure and Properties of High-Silicon–Aluminum Composite

Effect of sintering process on microstructure and properties of Al–Si alloy made by powder metallurgy for electronic packaging application

Effects of Cu/Er on Tensile Properties of Cast Al-Si Alloy at Low Temperature

工艺参数对SLM成形AlSi10Mg合金组织与硬度的影响

Ag对Mg-4Zn-0.5Sr合金显微组织与力学性能的影响

压铸Al-Zn-Si-Cu合金的力学与导热性能

电磁搅拌对挤压Mg-4Zn-0.3Zr合金组织与性能影响

Study of the evolution mechanisms of Fe-rich phases in Al-Si-Fe alloys with Mn modification using synchrotron X-ray imaging

Experimental validation of the thermodynamic theory for predicting the strength of 6061 Al alloy with complex loadings

固溶时间对半固态挤压成形Al-17Si-4Cu-0.5Mg合金组织及力学性能的影响

浆料制备工艺对Al-17Si-4Cu-0.5Mg合金组织性能的影响

Nucleation and growth of Fe-rich phases in Al-5Ti-1B modified Al-Fe alloys investigated using synchrotron X-ray imaging and electron microscopy

Influence of embedded reduced graphene oxide on the corrosion-wear performance of cold sprayed Zn-rGO/Al coating in NaCl solution

ZL101A合金低温疲劳性能和断裂行为研究

低频电磁场对半连续铸造Al-Mg-Si-Cu合金显微组织的影响

Si含量对Al-Si电子封装材料组织和性能的影响

SLM成形和热处理对AlSi10Mg合金组织与性能的影响

挤压铸造中比压对未变质过共晶Al-Si合金组织性能的影响

热处理对Mg-Zn-Sr合金组织与性能的影响

稀土Nd对铸造Al-Si合金低温拉伸断裂行为的影响

RE对铸造Al-6Zn-2.5Mg-1.8Cu合金热裂倾向性的影响

固溶处理对半固态成形过共晶Al-Si-Cu-Mg合金组织与性能的影响

挤压铸造和热处理对WE43镁合金组织与性能的影响

冷热循环处理对电磁搅拌AZ91镁合金组织与性能的影响

压制模具温度对粉末冶金成型铝硅电子封装材料组织和性能的影响

Na变质对ZL101合金低温力学性能的影响

Sr/P变质处理对挤压铸造Al-17.5Si合金组织与性能的影响

磁场电流对AZ31镁合金组织与性能的影响

深冷处理对电磁搅拌AZ91镁合金组织与性能的影响

Sr变质对ZL101合金显微组织和低温拉伸性能的影响

铸造缺陷对ZL101合金断裂行为的影响

离心铸造对AZ91镁合金组织及力学性能的影响

晶粒尺寸对ZL101合金低温拉伸性能的影响

热挤压对挤压过共晶Al-17.5Si合金组织与性能的影响

变质处理及挤压铸造对过共晶Al-Si-Cu-Mg合金组织与性能的影响

挤压铸造对过共晶Al-Si-Cu-Mg合金组织与性能的影响

超声波功率对铸轧5182铝合金带坯组织性能的影响

电磁搅拌对Al-5Ti-B中间合金组织及细化效果的影响

Si相对铸造Al-Si合金低温拉伸断裂行为的影响

挤压铸造Al-17.5Si-4Cu-0.5Mg合金热压缩变形行为及其加工图

挤压铸造对Al-Sr中间合金性能及变质效果的影响

Al-17.5Si-4Cu-0.5Mg合金热变形行为及其加工图

固溶处理对挤压铸造Al17.5Si4Cu0.5Mg0.1Mn合金显微组织及硬度的影响

挤压铸造和固态热挤压Al-6Zn-2.5Mg-1.8Cu合金的显微组织和力学性能（英文）

低温下ZL101合金的裂纹扩展行为

低温下ZL101合金中位错运动对Si相断裂的影响