彭业萍｜深圳大学｜学者主页

期刊论文

2026

Friction-induced vibration-based online wear state identification of artificial knee joints: enhancement with wear particle features

Yeping Peng, Rongrun Zhuang, Kaiyu Luo, Chao Wu, Song Wang, Chaozong Liu, Guangzhong Cao

Wear

DOI

2026

Wear evolution analysis of artificial joints based on wear particle recognition: A study under insufficient and imbalanced sample scenarios

Yeping Peng, Desheng Kong, Zihao Wang, Song Wang, Chaozong Liu, Guang‐Zhong Cao

Friction

DOI

2026

Effects of Braiding Parameters on the Mechanical and Tribological Properties of Artificial Ligaments

Jian Song, Guiyang Liu, Shenglin Li, Xuanye Liu, Yeping Peng

Biosurface and Biotribology

DOI

2025

镍钛编织支架的磨屑特征与细胞毒性关系研究

孔德宇，彭业萍，庄溶润，王松，曹广忠

《摩擦学学报(中英文)》

2025

Binocular-Separated Modeling for Efficient Binocular Stereo Matching

Yeping Peng, Jianrui Xu, Guang‐Zhong Cao, Runhao Zeng

IEEE Transactions on Intelligent Transportation Systems

DOI

2024

基于动力学仿真的人工膝关节振动信号采集系统设计

徐星宇，周友逸，彭业萍，吴超，曹广忠

《医用生物力学》

2024

人工关节组合界面的磨损行为研究进展

彭业萍，孔德宇，庄溶润，王松，曹广忠

《清华大学学报(自然科学版)》

2024

In-Vitro Investigation on the Tribological Properties of Nickel-Titanium (NiTi) Alloy Used in Braided Vascular Stents

Yeping Peng, Deyu Kong, Song Wang, Guang‐Zhong Cao, Chaozong Liu

Tribology Transactions

DOI

2024

A machine learning system for artificial ligaments with desired mechanical properties in ACL reconstruction applications

Yeping Peng, Guiyang Liu, Shenglin Li, Zeng Li, Jian Song

Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials

DOI

2024

New insights and perspectives into biodegradable metals in cardiovascular stents: A mini review

Zihao Wang, Jian Guo Song, Yeping Peng

Journal of Alloys and Compounds

DOI

2024

Three-dimensional reconstruction of wear particle surfaces using multi-focus image sequence

Yeping Peng, Youyi Zhou, Song Wang, Guang‐Zhong Cao, Chaozong Liu

Measurement

DOI

2023

人工膝关节不同体外磨损周期的UHMWPE磨屑特征及细胞毒性研究

付松卿，王松，陈凯，张述，秦颖，彭业萍，刘伟强

《摩擦学学报(中英文)》

2023

Study on wear debris characteristics of different polyethylene under reciprocating sliding and compound motion modes

Junhui Li, Song Wang, Songqing Fu, Yeping Peng

Wear

DOI

2023

Probability-weighted ensemble support vector machine for intelligent recognition of moving wear debris from joint implant

Yeping Peng, Hongtao Yue, Song Wang, Guang‐Zhong Cao, Hongkun Wu, Chaozong Liu

Tribology International

DOI

2022

人工关节磨屑的显微单视图深度估计方法研究

伍锐斌，彭业萍，曹广忠，王松，曹树鹏

《润滑与密封》

2022

Development of RGB-D simultaneous localization and mapping in dynamic environments based on motion removal and dense map reconstruction

Genping Zhao, Junhao Qiu, Yeping Peng, Xiaowei Zhang

Journal of Applied Remote Sensing

DOI

2022

Intelligent Recognition of Artificial Joint Wear Particles From Lubrication Fluid Based on Multi-View Image Features

Hongtao Yue, Yeping Peng, Song Wang, Guang‐Zhong Cao, Huapeng Li

International Conference on Biomedical Engineering and Applications (ICBEA)

DOI

2021

融合Hough直线检测和Grab-cut的风机叶片自适应分割方法

唐震，彭业萍，王伟江，曹广忠，吴超

《电子测量与仪器学报》

DOI

2021

Three-dimensional reconstruction of wear particles by multi-view contour fitting and dense point-cloud interpolation

Yeping Peng, Zhengbin Wu, Guangzhong Cao, Song Wang, Hongkun Wu, Chaozong Liu, Zhongxiao Peng

Measurement

DOI

2020

基于KLT多视图特征跟踪的物体三维重建

吴正斌，彭业萍，曹广忠，曹树鹏

《合肥工业大学学报(自然科学版)》

2020

Moving object detection for camera pose estimation in dynamic environments

Xiaowei Zhang, Yeping Peng, Mingbin Yang, Guang‐Zhong Cao, Chao Wu

DOI

2020

Distributed Database of Cloud Platform for the Lower-limb Exoskeleton Robot

Yi Wu, Guang-Zhong Cao, Su‐Dan Huang, Yeping Peng

International Conference on Ubiquitous Robots (UR)

DOI

2020

WP-DRnet: A novel wear particle detection and recognition network for automatic ferrograph image analysis

Yeping Peng, Junhao Cai, Tonghai Wu, Guang‐Zhong Cao, N. M. Kwok, Zhongxiao Peng

Tribology International

DOI

2019

面向机柜表面缺陷检测的不均匀光照和低亮度图像增强方法

王伟江，彭业萍，曹广忠，郭小勤

《仪器仪表学报》

DOI

2019

基于CC2530与CC3200的室内环境监测系统设计

蔡俊豪，曹广忠，彭业萍，周受钦

《现代电子技术》

DOI

2019

A hybrid convolutional neural network for intelligent wear particle classification

Yeping Peng, Junhao Cai, Tonghai Wu, Guangzhong Cao, N. M. Kwok, Shengxi Zhou, Zhongxiao Peng

Tribology International

DOI

2018

基于锚点的边缘检测优化算法研究

李世雄，曹广忠，李庆，彭业萍，吕洁印

《电子测量与仪器学报》

2018

EtherCAT无线网关设计与实现

钱秋阳，曹广忠，彭业萍，钟祥永

《自动化仪表》

2018

Restoration of low-informative image for robust debris shape measurement in on-line wear debris monitoring

Hongkun Wu, Ruowei Li, N. M. Kwok, Yeping Peng, Tonghai Wu, Zhongxiao Peng

Mechanical Systems and Signal Processing

DOI

2017

A hybrid search-tree discriminant technique for multivariate wear debris classification

Yeping Peng, Tonghai Wu, Guang‐Zhong Cao, Su‐Dan Huang, Hongkun Wu, N. M. Kwok, Zhongxiao Peng

Wear

DOI

2017

Wear state identification using dynamic features of wear debris for on-line purpose

Yeping Peng, Tonghai Wu, Shuo Wang, Zhongxiao Peng

Wear

DOI

2014

基于在线铁谱图像的磨损机理智能辨识

武通海，彭业萍，盛晨兴，吴教义

《机械工程学报》

预印本

2023

MHPCG:Multi-modal Hyperspectral Point Cloud Generation Based on Single RGB Image

weitao cai, Genping Zhao, Zhuowei Wang, Yeping Peng, he su, Lianglun Cheng

DOI

彭业萍

精选作品

期刊论文

Friction-induced vibration-based online wear state identification of artificial knee joints: enhancement with wear particle features

Wear evolution analysis of artificial joints based on wear particle recognition: A study under insufficient and imbalanced sample scenarios

Effects of Braiding Parameters on the Mechanical and Tribological Properties of Artificial Ligaments

镍钛编织支架的磨屑特征与细胞毒性关系研究

Binocular-Separated Modeling for Efficient Binocular Stereo Matching

基于动力学仿真的人工膝关节振动信号采集系统设计

人工关节组合界面的磨损行为研究进展

In-Vitro Investigation on the Tribological Properties of Nickel-Titanium (NiTi) Alloy Used in Braided Vascular Stents

A machine learning system for artificial ligaments with desired mechanical properties in ACL reconstruction applications

New insights and perspectives into biodegradable metals in cardiovascular stents: A mini review

Three-dimensional reconstruction of wear particle surfaces using multi-focus image sequence

人工膝关节不同体外磨损周期的UHMWPE磨屑特征及细胞毒性研究

Study on wear debris characteristics of different polyethylene under reciprocating sliding and compound motion modes

Probability-weighted ensemble support vector machine for intelligent recognition of moving wear debris from joint implant

人工关节磨屑的显微单视图深度估计方法研究

Development of RGB-D simultaneous localization and mapping in dynamic environments based on motion removal and dense map reconstruction

Intelligent Recognition of Artificial Joint Wear Particles From Lubrication Fluid Based on Multi-View Image Features

融合Hough直线检测和Grab-cut的风机叶片自适应分割方法

Three-dimensional reconstruction of wear particles by multi-view contour fitting and dense point-cloud interpolation

基于KLT多视图特征跟踪的物体三维重建

Moving object detection for camera pose estimation in dynamic environments

Distributed Database of Cloud Platform for the Lower-limb Exoskeleton Robot

WP-DRnet: A novel wear particle detection and recognition network for automatic ferrograph image analysis

面向机柜表面缺陷检测的不均匀光照和低亮度图像增强方法

基于CC2530与CC3200的室内环境监测系统设计

A hybrid convolutional neural network for intelligent wear particle classification

基于锚点的边缘检测优化算法研究

EtherCAT无线网关设计与实现

Restoration of low-informative image for robust debris shape measurement in on-line wear debris monitoring

A hybrid search-tree discriminant technique for multivariate wear debris classification

Wear state identification using dynamic features of wear debris for on-line purpose

基于在线铁谱图像的磨损机理智能辨识

预印本

MHPCG:Multi-modal Hyperspectral Point Cloud Generation Based on Single RGB Image

研究方向