百晓学者学者目录

高国富

博士生导师、教授、硕士生导师，河南理工大学

精选作品

期刊论文

2026

Wire torsion-driven wear mechanism of guide wheel wire groove during diamond multi-wire slicing

Jintao Zheng, Peiqi Ge, Guofu Gao, Hui Cen, Guohong Liu, Hang Wang, Xu Xing, Chongxue Wang

Journal of Manufacturing Processes

DOI

2026

Enhanced tribological performance of snowflake-textured CVD diamond coatings under nanofluid lubrication

Ziyang Zhang, Daohui Xiang, Chaosheng Song, Shuaikun Yang, 李艳琴, Cuiya Feng, Yuanshuai Yang, Jinglin Tong, Guofu Gao, Yanyan Yan

Journal of Manufacturing Processes

DOI

2026

Mechanism of diamond tool wear suppression under low-temperature air cooling: MD simulation and experimental validation

Chaosheng Song, Daohui Xiang, Yanqin Li, Zhiqiang Zhang, Shuaikun Yang, Cuiya Feng, Guofu Gao

Journal of Manufacturing Processes

DOI

2026

Investigation on transmission mechanism of dynamic load from tool end to the ultrasonic transducer end

Youyi Zheng, Shuaifei Cai, Junjin Ma, Feng Jiao, Guofu Gao, Lei Ren, Dinghua Zhang, Bo Zhao, Xiaoyan Pang

The International Journal of Advanced Manufacturing Technology

DOI

2026

Multidimensional ultrasonic vibration-induced atomic-scale deformation in hardened die steel nano-scratching

Ziyang Zhang, Daohui Xiang, Chaosheng Song, Shuaikun Yang, Yanqin Li, Cuiya Feng, Yi Yang, Jinglin Tong, Guofu Gao, Yanyan Yan

Applied Surface Science

DOI

2026

Microstructure evolution and magnetic properties strengthening mechanism of longitudinal-torsional ultrasonic vibration-assisted milling 1J22

Jintao Fang, Guofu Gao, Bingyang Zhang, Daohui Xiang, Junjin Ma

Materials Characterization

DOI

2026

Study on Surface Micro-Texture of Ti2AlNb-based Alloy Cladding Layer by Ultrasonic and Temperature Field Assisted Milling

Ruikang LI, Guofu Gao, Wenbin MA

Academic Journal of Emerging Technologies

DOI

2026

Study on The synergistic effect and material removal mechanism in Laser-Ultrasonic vibration composite scratching of single crystal silicon

Daohui Xiang, Hongyue Cui, Chaosheng Song, Yanqin Li, Shuaikun Yang, Peicheng Peng, Jinglong Sang, Guofu Gao, Jinglin Tong

Optics & Laser Technology

DOI

2026

Recent advances and future trends in surface nanoburnishing and multifield-assisted strengthening of difficult-to-machine metal alloys: A review

Shuaikun Yang, Daohui Xiang, Qinglong An, Dazhong Wang, Xuekun Li, Guofu Gao, Feng Jiao, Bo Zhao

Journal of Manufacturing Processes

DOI

2026

Cutting force modeling and machinability analysis for ultrasonic vibration-assisted thread milling of SiCp/Al composites

Ziyang Zhang, Daohui Xiang, Chaosheng Song, Shuaikun Yang, Yanqin Li, Peicheng Peng, Bo Li, Guofu Gao, Yanyan Yan, Jinglin Tong

Mechanical Systems and Signal Processing

DOI

2026

Research progress on special machining technology in the machining of SiCp/Al composites

Zhaojie Yuan, Daohui Xiang, Yi Wang, Xueli Cheng, Linchao An, Zongxia Fu, Wenbo Bie, Yunyan Zhang, Jiejing Li, Kun Zhao, Peicheng Peng, Zhongxin Hou, Guofu Gao, Jinglin Tong

The International Journal of Advanced Manufacturing Technology

DOI

2026

Temperature-controlled ultrasonic vibration assisted machining response and improvement mechanism for Ti2AlNb alloy manufactured by directed energy deposition

Yan Wang, Guofu Gao, Zhi Ming, Ruikang LI, Wenbin MA, Daohui Xiang, Junjin Ma

Chinese Journal of Aeronautics

DOI

2025

Experimental Study on the Residual Stress of Ti2AlNb Cladding Layer Under Ultrasonic-Temperature Milling

Shao-jie Du, Zhi Ming, Ye Li, Guangmiao Wang, Guofu Gao, Daohui Xiang

Journal of Materials Engineering and Performance

DOI

2025

Synergistic mechanism of laser-ultrasonic elliptical vibration on turning damage suppression in SiCp/Al composites

Peicheng Peng, Xiaolong Tian, Heshuai Yu, Wenbo Bie, Yashan Feng, Li‐Qun Chen, Ke Niu, Daohui Xiang, Guofu Gao

Engineering Failure Analysis

DOI

2025

Research on the Surface Characteristics of TC4 Titanium Alloy Subjected to Eccentric Ultrasonic Surface Rolling Process

Jinglin Tong, Yahang Zheng, Shuaikun Yang, Xinbo Li, Linxuan Liu, Daohui Xiang, Guofu Gao

Journal of Materials Engineering and Performance

DOI

2025

Optimization of the cutting mechanism in die steel milling using textured NCD-coated tools and vortex tube cooling

Ziyang Zhang, Daohui Xiang, Chaosheng Song, Yanqin Li, Zhiqiang Zhang, Maozhen Xu, Cheng Zhong, Guofu Gao, Jinglin Tong, Junjin Ma

Journal of Manufacturing Processes

DOI

2025

Microstructural characterization and Tribological properties of silicon-doped diamond coatings on surface-textured cemented carbide spheres

Daohui Xiang, Ke Wang, Zhiqiang Zhang, Chaosheng Song, Yanqin Li, Shuaikun Yang, Jun Zhang, Yanwen Zhang, Guofu Gao, Jinglin Tong

International Journal of Refractory Metals and Hard Materials

DOI

2025

Multi-dimensional ultrasonic assisted microscale scratching of Fe-Cr alloys

Chaosheng Song, Daohui Xiang, Yanqin Li, Zhiqiang Zhang, Shuaikun Yang, Guofu Gao, Xiaobin Cui

International Journal of Mechanical Sciences

DOI

2025

Experimental research on the performance of micro-textured CVD diamond-coated abrasive tools in longitudinal-torsional ultrasonic grinding of die steel

Zhiqiang Zhang, Daohui Xiang, Chaosheng Song, Jun Zhang, Shuaikun Yang, Junjin Ma, Guofu Gao

Precision Engineering

DOI

2025

Preparation and grinding performance of B-, N-, and Si-doped CVD diamond-coated spherical abrasive tools

Zhiqiang Zhang, Daohui Xiang, Chaosheng Song, Jun Zhang, Shuaikun Yang, Junjin Ma, Guofu Gao

Ceramics International

DOI

2025

Laser-assisted ultrasonic elliptical vibration turning of high-volume fraction SiCp/Al force-thermal research

Zhong Cheng, Daohui Xiang, Zhaojie Yuan, Chaosheng Song, Guofu Gao, Jinglin Tong, Bo Zhao

Materials & Design

DOI

2025

Study on cutting force in laser-assisted ultrasonic elliptical vibration machining (LUEVM) of high volume SiCp/Al composites

Peicheng Peng, Tian Tian, Heshuai Yu, Daohui Xiang, Ke Niu, Wei Gao, Yanqin Li, Zhaojie Yuan, Guofu Gao

Materials & Design

DOI

2025

Modeling of axial force and torque in UAD of polycrystalline 3C-SiC

Guofu Gao, Haoxiang Wang, Ruikang Li, Bingyang Zhang, Wenbin Ma, Daohui Xiang, Junjin Ma

International Journal of Mechanical Sciences

DOI

2025

Study on the milling characteristics of SiCp/Al composites via laser-assisted multi-dimensional ultrasonic machining

Daohui Xiang, Ziyang Zhang, Chaosheng Song, Zhaojie Yuan, Shuaikun Yang, Mingyang Ma, Yanqin Li, Guofu Gao, Jinglin Tong, Bo Ya Zhao

The International Journal of Advanced Manufacturing Technology

DOI

2025

Surface quality study of SiCp/Al composites by laser-ultrasonic vibration-assisted milling (LA-UVM)

Maozhen Xu, Yanqin Li, Daohui Xiang, Chaosheng Song, Zhaojie Yuan, Zhiqiang Zhang, Shuaikun Yang, Mingyang Ma, Guofu Gao, Jinglin Tong

Optics & Laser Technology

DOI

2025

Wear modelling and experimental research on diamond coated tool ultrasonic longitudinal-torsional vibration grinding and polishing of SiCp/Al composites

Cheng Zhong, Daohui Xiang, Jun Zhang, Chaosheng Song, Yanqin Li, Guofu Gao, Jinglin Tong, Xiaobin Cui, Bo Zhao

Wear

DOI

2025

Analysis of the Surface Friction and Wear Properties of High Temperature γ-TiAl Alloy in Ultrasonic-Assisted Milling

Chenyang Wei, Guangmiao Wang, Yunfei Xiang, Guofu Gao

International Journal of Mechanical and Electrical Engineering

DOI

2025

Study on the Surface Properties of Ti2AlNb Laser Additive Cladding Layer Under Ultrasonic Micro-forging

Guofu Gao, Guangmiao Wang, Xianrong Pan, Chenyang Wei, Yunfei Xiang, Daohui Xiang

Metallurgical and Materials Transactions B

DOI

2025

A novel analytical model for predicting the thin-walled workpiece deformation considering the effect of residual stress accumulation and redistribution in layer by layer milling

Junjin Ma, Yutong Liu, Yong Zhao, Feng Jiao, Guofu Gao, Daohui Xiang, Dinghua Zhang, Bo Ya Zhao, Xiaoyan Pang

Journal of Manufacturing Processes

DOI

2025

Development on shape and performance control of aeronautical parts in additive manufacturing

Guofu Gao, Wang Yan, Junqing Wang, Kuan Zhang, Daohui Xiang, Junjin Ma

Journal of Manufacturing Processes

DOI

2025

Modeling on cutting force considering tool flank wear in ultrasonic vibration-assisted milling Ti3Al

Guofu Gao, Yunfei Xiang, Huai Qiao, Chenyang Wei, Guangmiao Wang, Daohui Xiang

Wear

DOI

2025

Microscopic characterization and tribological properties of boron-doped microtextured spherical diamond composite coatings

Daohui Xiang, Jun Zhang, Zhiqiang Zhang, Yanwen Zhang, Cheng Zhong, Chaosheng Song, Yanqin Li, Guofu Gao, Jinglin Tong

International Journal of Refractory Metals and Hard Materials

DOI

2025

Two-dimensional ultrasonic-assisted variable cutting depth scratch force model considering tool wear and experimental verification

Chaosheng Song, Daohui Xiang, Zhaojie Yuan, Zhiqiang Zhang, Shuaikun Yang, Guofu Gao, Jinglin Tong, Xiaobo Wang, Xiaobin Cui

Tribology International

DOI

2024

基于HPPC-FFRLS的锂电池等效模型参数在线辨识

李长有，张颖，赵勇，高国富

《河南理工大学学报(自然科学版)》

2024

轴承内孔超声振动磨削未变形切屑厚度分布及表面粗糙度预测（英文）

李艳琴，向道辉，高国富，焦锋，赵波

Journal of Zhejiang University-Science A

2024

Research on cutting temperature of laser-ultrasonic composite turning of high volume fraction SiCp/Al composite materials

Peicheng Peng, Tian Tian, Daohui Xiang, Heshuai Yu, Ke Niu, Wei Gao, Zhaojie Yuan, Guofu Gao

Thermal Science and Engineering Progress

DOI

2024

A thermo-mechanical coupling load model for high-frequency piezoelectric ultrasonic transducer

Kuan Zhang, Guofu Gao, Wenbin Ma, Ruikang Li, Daohui Xiang, Junjin Ma

Ultrasonics Sonochemistry

DOI

2024

Ultrasonic longitudinal-torsional vibration helical milling internal thread of SiCp/Al composites: Finite element simulation and machining quality research

Daohui Xiang, Bo Su, Dazhong Wang, Peicheng Peng, Zhaojie Yuan, Chaosheng Song, Bo Li, Xiaobin Cui, Guofu Gao, Bo Ya Zhao

Journal of Manufacturing Processes

DOI

2024

Microscopic impacts of ultrasonic vibration on interfacial strength of SiCp/Al composites

Zhaojie Yuan, Daohui Xiang, Peicheng Peng, Chaosheng Song, Jinglong Sang, Yu ZHANG, Guofu Gao, Bo Ya Zhao

Chinese Journal of Aeronautics

DOI

2024

Improving wear resistance and machining performance of diamond tools in ferrous metals cutting: A review

Chaosheng Song, Daohui Xiang, Bo Ya Zhao, Qinglong An, Xuekun Li, Dazhong Wang, Feng Jiao, Guofu Gao, Xiaobin Cui

Journal of Materials Processing Technology

DOI

2024

Cutting force prediction model considering tool-chip contact interface friction behavior in ULTVAM of Ti-6Al-4V

Junjin Ma, Yujie Zhang, Yujie Li, Chenwei Shan, Feng Jiao, Guofu Gao, Dinghua Zhang, Bo Ya Zhao

Chinese Journal of Aeronautics

DOI

2024

Multidimensional ultrasonic vibration machining modeling of SiCp/Al cutting forces with different volume fractions: Experiments and numerical simulations

Daohui Xiang, Zhong Cheng, Zhaojie Yuan, Yanqin Li, Peicheng Peng, Chaosheng Song, Zhiqiang Zhang, Guofu Gao, Xiaobin Cui, Jinglin Tong

Composites Communications

DOI

2024

An LCC-CS bilateral matching network for high efficiency energy conversion in high-frequency piezoelectric rotary ultrasonic machining system

Kuan Zhang, Guofu Gao, Yi Wang, Yan Wang, Guangmiao Wang, Yunfei Xiang, Zhenkai Wu, Daohui Xiang

Measurement

DOI

2024

Friction characterization of SiCp/Al composites by 3D ultrasonic vibration-assisted milling

Daohui Xiang, Jinglong Sang, Peicheng Peng, Zhaojie Yuan, Chaosheng Song, Gaofeng Liu, Xiaobin Cui, Guofu Gao, Bo Zhao

Mechanical Systems and Signal Processing

DOI

2024

Estimation of tool temperature during laser-ultrasonic elliptical vibration turning high volume fraction SiCp/Al composites

Peicheng Peng, Daohui Xiang, Zhaojie Yuan, Zhiqiang Zhang, Chaosheng Song, Guofu Gao, Xiaobin Cui, Bo Zhao

International Journal of Thermal Sciences

DOI

2024

Prediction of undeformed chip thickness distribution and surface roughness in ultrasonic vibration grinding of inner hole of bearings

Yanqin Li, Daohui Xiang, Guofu Gao, Feng Jiao, Bo Zhao

Journal of Zhejiang University. Science A

DOI

2024

Preparation of HFCVD spherical diamond films and the effect of crystal orientations on adhesion and tribological properties

Daohui Xiang, Yanwen Zhang, Zebin Su, Zhiqiang Zhang, Zhaojie Yuan, Chaosheng Song, Guofu Gao, Xiaobin Cui, Lei Ren

International Journal of Refractory Metals and Hard Materials

DOI

2024

Research on ultrasonic grinding ZrO2 ball valve with a cup-shaped diamond grinding wheel

Guofu Gao, Jianfeng Li, Huai Qiao, Kuan Zhang, Zhuang Zhi Sun, Daohui Xiang

The International Journal of Advanced Manufacturing Technology

DOI

2024

Integrated high-frequency piezoelectric transducer within radial critical dimension of piezoceramics

Kuan Zhang, Guofu Gao, Yan Wang, Yi Wang, Jianfeng Li, Daohui Xiang, Bo Ya Zhao

International Journal of Mechanical Sciences

DOI

2023

多维超声振动铣削Ti2AlNb合金试验研究

高国富，乔淮，袁照杰，王梦，王晓博，向道辉

《河南理工大学学报(自然科学版)》

2023

硬质合金激光改性协同仿生微织构对硼掺杂金刚石涂层性能的影响

苏泽彬，向道辉，李艳琴，彭培成，张志强，高国富，赵波，张智鹏

《表面技术》

2023

超声微锻Ti3Al熔覆层组织与性能的实验研究

高国富，潘贤荣，常黎明，王得宇，赵波

《表面技术》

2023

Two-dimensional ultrasonic vibration-assisted dry grinding gear: grinding force and surface characteristics

Wenbo Bie, Bo Zhao, Guofu Gao, Fan Chen, Yingli Chang, Huitao Chen

The International Journal of Advanced Manufacturing Technology

DOI

2023

Analysis of microscopic deformation mechanism of SiCp/Al composites induced by ultrasonic vibration nanoindentation

Zhaojie Yuan, Daohui Xiang, Peicheng Peng, Yanqin Li, Zhiqiang Zhang, Binghao Li, Bo Su, Guofu Gao, Bo Zhao

Journal of Cleaner Production

DOI

2023

Modelling of tribological behavior and wear for micro-textured surfaces of Ti2AlNb intermetallic compounds machined with multi-dimensional ultrasonic vibration assistance

Yi Wang, Guofu Gao, Kuan Zhang, Yan Wang, Xiaobo Wang, Daohui Xiang

Tribology International

DOI

2023

Study of longitudinal-torsional ultrasonic-assisted vibration on micro-hole drilling Zr-based metallic glass

Guofu Gao, Zhuang Zhi Sun, Xianrong Pan, Jianfeng Li, Daohui Xiang

The International Journal of Advanced Manufacturing Technology

DOI

2023

Experimental study on ultrasonic vibration assisted grinding of GCr15SiMn bearing steel

Mingyang Ma, Daohui Xiang, Xiaofei Lei, Peicheng Peng, Zhaojie Yuan, Yanqin Li, Guofu Gao, Feng Jiao, Bo Zhao

Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science

DOI

2023

Preparation and milling performance of boron-doped diamond composite coating cutters

Daohui Xiang, Zhipeng Zhang, Zhiqiang Zhang, Zebin Su, Peicheng Peng, Yanqin Li, Guofu Gao, Bo Ya Zhao

The International Journal of Advanced Manufacturing Technology

DOI

2023

Mechanism and experimental evaluation on surface morphology of GCr15SiMn with ultrasonic vibration grinding

Daohui Xiang, Binghao Li, Chongyang Zhao, Xiaofei Lei, Peicheng Peng, Zhaojie Yuan, Guofu Gao, Feng Jiao, Bo Zhao

The International Journal of Advanced Manufacturing Technology

DOI

2023

Review of the design of power ultrasonic generator for piezoelectric transducer

Kuan Zhang, Guofu Gao, Chongyang Zhao, Yi Wang, Yan Wang, Jianfeng Li

Ultrasonics Sonochemistry

DOI

2023

Grinding force assessment in tangential ultrasonic vibration-assisted grinding gear: Analytical model and experimental verification

Wenbo Bie, Bo Zhao, Guofu Gao, Fan Chen, Huitao Chen

The International Journal of Advanced Manufacturing Technology

DOI

2023

A comprehensive review of advances in ultrasonic vibration machining on SiCp/Al composites

Zhaojie Yuan, Daohui Xiang, Peicheng Peng, Zhiqiang Zhang, Binghao Li, Mingyang Ma, Zhipeng Zhang, Guofu Gao, Bo Ya Zhao

Journal of Materials Research and Technology

DOI

2023

Ultrasonic constitutive model and its application in ultrasonic vibration-assisted milling Ti3Al intermetallics

Guofu Gao, Zongxia Fu, Yi WANG, Xianrong Pan, Daohui Xiang, Bo Zhao

Chinese Journal of Aeronautics

DOI

2022

大负载超声振动磨削系统的设计

李艳琴，赵波，向道辉，高国富，焦锋，王梦，雷小飞

《声学学报》

2022

Multi-objective optimization of processing parameters for ultrasonic surface rolling 12Cr2Ni4A gear steel based on an improved gray correlation analysis

Guofu Gao, Yi Wang, Bo Zhao, Daohui Xiang, Shuai-ling Lan

Multiscale and Multidisciplinary Modeling Experiments and Design

DOI

2022

Experimental and FEM study of surface formation and deformation mechanism of SiCp/Al composites in laser-ultrasonic vibration assisted turning

Bo Li, Daohui Xiang, Peicheng Peng, Yanqin Li, Gaofeng Liu, Guofu Gao, Bo Zhao

Ceramics International

DOI

2022

Analytical modeling of abrasive grain-workpiece cutting coefficient and experimental investigation on tangential ultrasonic vibration-assisted forming grinding gear

Wenbo Bie, Bo Zhao, Guofu Gao, Fan Chen, Shaopeng Chen

The International Journal of Advanced Manufacturing Technology

DOI

2022

Review of multi-dimensional ultrasonic vibration machining for aeronautical hard-to-cut materials

Guofu Gao, Yi Wang, Zongxia Fu, Chongyang Zhao, Daohui Xiang, Bo Zhao

The International Journal of Advanced Manufacturing Technology

DOI

2022

Tangential Ultrasonic-Vibration Assisted Forming Grinding Gear: An Experimental Study

Wenbo Bie, Bo Zhao, Guofu Gao, Fan Chen, Jiangwei Jin

Micromachines

DOI

2022

Correction to: Experimental study on a two‑dimensional ultrasonic vibration platform and milling of Ti2AlNb intermetallic alloy

Zhaojie Yuan, Guofu Gao, Yi Wang, Zongxia Fu, Daohui Xiang

The International Journal of Advanced Manufacturing Technology

DOI

2022

Experimental study on laser assisted ultrasonic elliptical vibration turning (LA-UEVT) of 70% SiCp/Al composites

Peicheng Peng, Daohui Xiang, Yanqin Li, Zhaojie Yuan, Xiaofei Lei, Bo Li, Gaofeng Liu, Bo Ya Zhao, Guofu Gao

Ceramics International

DOI

2022

Investigation of acoustic softening and microstructure evolution characteristics of Ti3Al intermetallics undergoing ultrasonic vibration-assisted tension

Zongxia Fu, Guofu Gao, Yi Wang, Deyu Wang, Daohui Xiang, Bo Zhao

Materials & Design

DOI

2022

Experimental study on a two-dimensional ultrasonic vibration platform and milling of Ti2AlNb intermetallic alloy

Zhaojie Yuan, Guofu Gao, Yi Wang, Zongxia Fu, Daohui Xiang

The International Journal of Advanced Manufacturing Technology

DOI

2022

Research on dynamic mechanical properties and plastic constitutive relation of Ti3Al intermetallic compounds under mechanical-thermal coupling

Zongxia Fu, Guofu Gao, Yi Wang, Huai Qiao, Daohui Xiang, Bo Zhao

Journal of Materials Research and Technology

DOI

2022

Establishment of scratching force model for micro-removal of SiCp/Al composites by ultrasonic vibration

Gaofeng Liu, Daohui Xiang, Peicheng Peng, Yanqin Li, Zhaojie Yuan, Zhimeng Zhang, Guofu Gao, Bo Zhao

Journal of Materials Processing Technology

DOI

2022

Study on the edge defects of high volume fraction 70% SiCp/Al composites in ultrasonic-assisted milling

Peicheng Peng, Daohui Xiang, Xiaofei Lei, Zhanli Shi, Bo Li, Gaofeng Liu, Bo Zhao, Guofu Gao

The International Journal of Advanced Manufacturing Technology

DOI

2022

Surface Micro-Texture and Tribological Properties in Longitudinal-Torsional Ultrasonic-Assisted Milling Ti2alnb

Ziwen Xia, Guofu Gao, Yi Wang, Menghua Zhang, Fangchao Jia, Chenwei Shan

The International Journal of Advanced Manufacturing Technology

DOI

2021

Ti-Al系金属间化合物精密加工研究进展

高国富，浮宗霞，王毅，向道辉，赵波

《稀有金属材料与工程》

2021

超声振动辅助ELID磨削淬硬12Cr2Ni4A合金钢表面特性的研究

向道辉，雷小飞，彭培成，牛肖肖，赵波，高国富

《表面技术》

DOI

2021

织构对硼掺杂金刚石涂层刀具摩擦学性能的影响

张志强，向道辉，胡永伟，陈艳彬，赵波，高国富

《中国表面工程》

2021

Study on formation mechanism of edge defects of high-volume fraction SiCp/Al composites by longitudinal-torsional ultrasonic vibration-assisted milling

Daohui Xiang, Bo Li, Peicheng Peng, Zhanli Shi, Yanqin Li, Guofu Gao, Bo Zhao

Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science

DOI

2021

Establishment of dynamic grinding force model for ultrasonic-assisted single abrasive high-speed grinding

Xiaofei Lei, Daohui Xiang, Peicheng Peng, Gaofeng Liu, Bo Li, Bo Zhao, Guofu Gao

Journal of Materials Processing Technology

DOI

2021

Finite Element and Experimental Analysis of Ultrasonic Vibration Milling of High-Volume Fraction SiCp/Al Composites

Zhanli Shi, Daohui Xiang, Haoren Feng, Bangfu Wu, Zhimeng Zhang, Guofu Gao, Bo Zhao

International Journal of Precision Engineering and Manufacturing

DOI

2021

Study on surface residual stress of hardened 12Cr2Ni4A alloy steel by ultrasonic vibration-assisted ELID grinding

Xiaofei Lei, Daohui Xiang, Peicheng Peng, Xiaoxiao Niu, Bo Zhao, Guofu Gao

The International Journal of Advanced Manufacturing Technology

DOI

2021

Study on thrust force of ultrasonic-assisted vibration micro-hole drilling of titanium alloy

Guofu Gao, Zhaojie Yuan, Ziwen Xia, Zongxia Fu, Daohui Xiang, Bo Zhao

The International Journal of Advanced Manufacturing Technology

DOI

2021

Cutting force model of longitudinal-torsional ultrasonic-assisted milling Ti-6Al-4V based on tool flank wear

Guofu Gao, Ziwen Xia, Tingting Su, Daohui Xiang, Bo Zhao

Journal of Materials Processing Technology

DOI

2020

刀具基体表面织构化对硼掺杂金刚石薄膜性能的影响

向道辉，胡永伟，陈艳彬，张治蒙，史战立，郭振海，赵波，高国富

《表面技术》

DOI

2020

Surface characteristics investigation of ultrasonic longitudinal-torsional milling of high–volume fraction SiCp/Al

Yanqin Li, Daohui Xiang, Haoren Feng, Guofu Gao, Zhanli Shi

The International Journal of Advanced Manufacturing Technology

DOI

2020

Influence of longitudinal-torsional ultrasonic-assisted vibration on micro-hole drilling Ti-6Al-4V

Guofu Gao, Ziwen Xia, Zhaojie Yuan, Daohui Xiang, Bo Zhao

Chinese Journal of Aeronautics

DOI

2020

Microstructure evolution and mechanical properties of the cladding layer of Ti-6Al-4V alloy depending on ultrasonic-assisted forging

Guofu Gao, Tingting Su, Zhang-Dong Li, Yi Wang, Zilong Guo, Zhaojie Yuan

Journal of Industrial and Production Engineering

DOI

2019

超声振动辅助Ni60WC25粉末激光熔覆技术

高国富，郭子龙，李康，王毅，苏婷婷

《金属热处理》

2019

超声激励薄液膜Faraday波形成机理

高国富，李康，李瑜，向道辉，赵波

《北京航空航天大学学报》

DOI

2019

Investigation of Cutting Force in Longitudinal-Torsional Ultrasonic-Assisted Milling of Ti-6Al-4V

Ying Niu, Feng Jiao, Bo Ya Zhao, Guofu Gao

Materials

DOI

2018

超声铣削C/C复合材料铣削力的理论建模

高国富，胡二娟，向道辉，赵波

《振动与冲击》

2017

基于超声振动钻削系统的换能器设计

高国富，车鹏，赵金坠

《河南理工大学学报(自然科学版)》

2017

杯形工具复合变幅杆设计及振动特性分析

陈汇资，赵波，赵金坠，高国富

《振动与冲击》

2016

磁力磨削Al2O3-TiO2陶瓷涂层试验

焦龙飞，高国富

《工具技术》

2016

超声纵扭振动钻削光学玻璃材料边缘破损的试验研究

高国富，车鹏

《工具技术》

2015

磁力研磨加工技术研究进展

高国富，王岩

《河南理工大学学报(自然科学版)》

2015

“现代控制理论”课堂实践教学经验浅谈

郭强，闫艳燕，张燕，高国富，赵波

《教育教学论坛》

2015

项目教学法在《机械制造技术基础》教学中的应用研究

童景琳，赵明利，高国富，张昌娟

《商丘职业技术学院学报》

2015

《控制工程基础》教学方法浅析

姜燕，张燕，闫艳燕，高国富，赵波

《科技视界》

2014

进行有限元分析时简支梁约束条件的确定

王得胜，程建业，高国富

《河南理工大学学报(自然科学版)》

2014

带式输送机驱动滚筒有限元分析时的加载方法

王得胜，王东，高国富

《河南理工大学学报(自然科学版)》

2014

辩证法视域下的“机械制造技术基础”课程教学探索

郑建新，高国富

《高教论坛》

2012

带式输送机大型换向滚筒接盘应力计算

王得胜，周爱平，高国富

《河南理工大学学报(自然科学版)》

2011

Experiment designation for machine accuracy measuring based on laser interferometer

Guofu Gao

Laboratory Science

2006

超声车削弯曲振动系统的试验研究

程雪利，赵波，刘传绍，焦锋，高国富

《机械》

2006

在频率跟踪后引起振动切削过程中振幅衰减的主要原因分析

秦军，刘传绍，赵波，焦锋，高国富

《河南理工大学学报(自然科学版)》

2006

离心泵工程陶瓷叶轮可行性的理论分析

李要锋，刘传绍，赵波，焦锋，高国富

《河南理工大学学报(自然科学版)》

2006

Analysis on the Primary Cause of Causing Amplitude Attenuation in the Ultrasonic Vibration Cutting after Frequency Tracking

Guofu Gao

Journal of Henan Polytechnic University

2006

The Discussion on Amplitude Attenuation in Ultrasonic Vibration Cutting

Guofu Gao

Journal of Hunan Institute of Engineering

2005

机器人传感器及其应用

高国富

《国防工业出版社》

2004

螺杆压缩机性能模拟的误差分析及稳定性判据

高国富，罗静，赵波，藤原满

《河南理工大学学报(自然科学版)》

2003

颗粒增强金属基复合材料的加工现状

郑建新，刘传绍，赵波，焦锋，高国富

《河南理工大学学报(自然科学版)》

2003

超硬磨料砂轮修整技术的新发展

樊全堂，赵波，刘传绍，高国富

《河南理工大学学报(自然科学版)》

2001

齿轮变速装置的优化设计

贾原，周爱平，王得胜，高国富

《河南理工大学学报(自然科学版)》

2000

硬脆材料精密小深孔BTA型珩磨工具的加工特性研究

杜文轩，高国富，贺子杏，赵波，和南方

《河南理工大学学报(自然科学版)》

会议论文

2015

超声振动磨削铝基碳化硅材料表面质量的研究

周直昆，向道辉，赵波，高国富，焦锋

《第16届全国特种加工学术会议论文集（下）》

2015

磁力磨削陶瓷涂层的实验研究

焦龙飞，高国富

《第16届全国特种加工学术会议》

2000

超声珩磨ZrO 2 陶瓷的延性-脆性转变特征研究

赵波，刘传绍，高国富，王得胜，焦锋

《第一届国际机械工程学术会议论文集》

2000

齿轮变速装置的数字化模型与优化

王得胜，周爱平，赵波，刘传绍，高国富

《第一届国际机械工程学术会议论文集》

预印本

2025

Surface Quality Study of Sicp/Al Composites by Laser Induced Oxidation Elliptic Ultrasonic Machining

Maozhen Xu, Yanqin Li, Daohui Xiang, Chaosheng Song, Zhaojie Yuan, Zhiqiang Zhang, Shuaikun Yang, Mingyang Ma, Guofu Gao, Jinglin Tong

SSRN Electronic Journal

DOI

此主页由公开资料整理，尚未经学者本人认领。