百晓学者学者目录

昝祥

副教授、副研究员、助理研究员、博士生导师、教授、研究员、硕导、讲师，合肥工业大学

精选作品

期刊论文

2026

钨粉改性工艺对喂料流变性能及钡钨阴极多孔钨基体孔隙性能的影响

何高勇，陈锦文，昝祥，罗来马，吴玉程

《粉末冶金技术》

DOI

2025

基于双峰晶粒结构的金属材料强塑性协同优化及应用探讨

罗来马，叶伟，魏国庆，刘祯，马冰，昝祥，吴玉程

《中国有色金属学报》

2025

粘结剂与粉末特性对金属注射成形喂料性能影响的研究进展

罗来马，阮方杰，叶伟，黄竹品，昝祥，吴玉程

《粉末冶金技术》

DOI

2025

Preparation of W–Cu composite with Cu-network structure via W-coated Cu powder structure optimization

Gang Yao, Xu Shen, Cai-Yan Wang, Xi-Peng Ding, Laima Luo, Jia-Qin Liu, Xiang Zan, Yucheng Wu

Journal of Materials Research and Technology

DOI

2025

Influence of the Injection Process on Two-Phase Separation in Stainless-Steel Metal Powder Injection Molding

Yan Li, Xingjie Peng, Xiang Zan, Laima Luo, Yucheng Wu

Metals

DOI

2024

Hf含量对湿化学法制备超细W-Y2O3复合材料显微组织与性能的影响

刘祯，颜硕，罗来马，昝祥，吴玉程

《中国有色金属学报》

2024

不同淬火加热温度对GCr15钢球显微组织及硬度的影响

袁影，钱坤，昝祥，郭金福，王登峰

《热加工工艺》

2024

氧化钇颗粒增强钨板在激光热负荷加载下的损伤及组织演化

任大雅，昝祥

《粉末冶金技术》

2024

第二相成分改性硬质合金的研究进展

杨宇，朱晓勇，昝祥，罗来马，刘家琴，吴玉程

《稀有金属与硬质合金》

2024

Effects of Y2Zr2O7 particles and rolling deformation process on the mechanical properties and heat load behavior of W–Y2Zr2O7 plate

Gang Yao, Shen Xu, Jia-Qin Liu, Hong-Yu Chen, Laima Luo, Xiang Zan, Yucheng Wu

Journal of Materials Research and Technology

DOI

2024

Formation mechanism of W-coated Cu composite powders and the metal injection molding using polyoxymethylene-based binders

Xi-Peng Ding, Cai-Yan Wang, Fang-Jie Ruan, Zhu-Pin Huang, Wan-Nan Xu, Laima Luo, Xiang Zan, Yucheng Wu

Journal of Materials Research and Technology

DOI

2024

In-situ observation of restoration of tungsten plate via high-temperature confocal laser scanning microscopy

Kang Wang, Jiaqin Liu, Xiang Zan, Laima Luo, Yucheng Wu

Nuclear Materials and Energy

DOI

2024

Failure analysis of damaged tungsten monoblock components of upper divertor outer target in EAST fusion device

Kang Wang, Ya Xi, Xiang Zan, Dahuan Zhu, Laima Luo, Rui Ding, Yucheng Wu

Nuclear Engineering and Technology

DOI

2024

Enhanced thermal-mechanical properties of rolled tungsten bulk material reinforced by in situ nanosized Y–Zr–O particles

Gang Yao, Hongyu Chen, Laima Luo, Xiang Zan, Yucheng Wu

Nuclear Engineering and Technology

DOI

2024

Restoration kinetics and microstructural evolution of moderately warm-rolled yttria dispersion-strengthened tungsten plate during annealing at high temperatures

Kang Wang, Ya Xi, Xiang Zan, Laima Luo, Jiaqin Liu, Yucheng Wu

Journal of Nuclear Materials

DOI

2023

低能高通量氦离子辐照下W28Ta28V28Zr8Sc8高熵合金损伤行为研究

王亚锋，陈志鸿，徐云凤，罗来马，昝祥，朱晓勇，吴玉程

《稀有金属材料与工程》

2023

面向等离子体材料用先进钨复合材料的改性研究进展与趋势

罗来马，颜硕，刘祯，昝祥，吴玉程

《粉末冶金技术》

2023

Study on elemental composition and interfacial structure of the second phase in WC-8Co hard alloy doped with rare earth components

Yu Yang, Zhenyun Lu, Xiang Zan, Laima Luo, Yucheng Wu

International Journal of Refractory Metals and Hard Materials

DOI

2023

Change of interfacial structure between the matrix and second phase of Y–Zr-modified WC-8Co cemented carbide

Yu Yang, Zhenyun Lu, Xiang Zan, Laima Luo, Yucheng Wu

Ceramics International

DOI

2023

Recrystallization kinetics of larger yttria particle dispersion tungsten alloy warm rolled to 50% thickness reduction

Kai Wang, Guangyu He, Xiang Zan, Limin Luo, J Q Liu, Yucheng Wu

Journal of Physics Conference Series

DOI

2023

Microstructure and wear performance of a WC-8Co hard alloy modified using W powders doped with Y2O3

Yang Yu, Zhen-Yun Lu, Zhenyun Lu, Junyu Tang, Xiang Zan, Qingqing Hou

International Journal of Refractory Metals and Hard Materials

DOI

2023

Characterization of the Crack and Recrystallization of W/Cu Monoblocks of the Upper Divertor in EAST

Ya Xi, Gaoyong He, Xiang Zan, Kang Wang, Dahuan Zhu, Laima Luo, Rui Ding, Yucheng Wu

Applied Sciences

DOI

2022

轧制加工对聚变装置用颗粒增强钨合金性能影响的研究进展

罗来马，赵志豪，姚刚，昝祥，朱晓勇，程继贵，吴玉程

《中国有色金属学报》

2022

离心喷雾干燥制备W-10Re合金粉末及其烧结行为研究

王亚锋，陈志鸿，徐旺之，王越，罗来马，昝祥，吴玉程

《中国钨业》

2022

The preparation process of ultrafine gain W-Re powder by wet chemical method and its effect on alloy properties

Wang–Zhi Xu, Jing Wang, Laima Luo, Xiang Zan, Yucheng Wu

Materials Today Communications

DOI

2022

Manufacturing of magnetron sputtering tungsten coatings and irradiation damage behavior under helium plasma exposure

Yunfeng Xu, Yue Xu, Laima Luo, Xiang Zan, Yucheng Wu

Vacuum

DOI

2022

Shape retention of cemented carbide prepared by Co melt infiltration into un-sintered WC green parts made via BJ3DP

Junyu Tang, Laima Luo, Zhen Liu, Xiang Zan, Yucheng Wu

International Journal of Refractory Metals and Hard Materials

DOI

2022

Enhanced mechanical and electrical properties of CuCrZr-WC alloy prepared by mechanical alloying and spark plasma sintering

Yongqiang Qin, Yi Zhuang, Yue Wang, Yifan Zhang, Laima Luo, Xiang Zan, Yucheng Wu

Fusion Engineering and Design

DOI

2022

Surface Damage and Microstructure Evolution of Yttria Particle-Reinforced Tungsten Plate during Transient Laser Thermal Shock

Daya Ren, Ya Xi, Jie Rong Yan, Xiang Zan, Laima Luo, Yucheng Wu

Metals

DOI

2022

The superior thermal stability and irradiation resistance capacities of tungsten composites synthesized by simple second-phase particle component modulation

Gang Yao, Hong–Yu Chen, Zhihao Zhao, Laima Luo, Yong Ma, Jigui Cheng, Xiang Zan, Qiu Yu Xu, Yucheng Wu

Journal of Nuclear Materials

DOI

2021

67%变形量纯钨轧板在1250℃退火过程中的再结晶行为

周智伟，王康，昝祥，罗来马，吴玉程

《精密成形工程》

2021

Excellent performance of W–Y2O3 composite via powder process improvement and Y2O3 refinement

Gang Yao, Xuepeng Liu, Zhihao Zhao, Laima Luo, Jigui Cheng, Xiang Zan, Zumin Wang, Qiu Yu Xu, Yucheng Wu

Materials & Design

DOI

2021

Evaluating surface damage behavior of W-(Y0.9La0.1)2O3 composites during spark plasma sintering process improvement

Gang Yao, Xuepeng Liu, Zhi-Yuan Zhao, Zhihao Zhao, Laima Luo, Jigui Cheng, Xiang Zan, Qiu Yu Xu, Yucheng Wu

Journal of Nuclear Materials

DOI

2021

Microstructure and annealing behavior of three rolled pure tungsten plates with different thickness reduction

Kang Wang, Ya Xi, Xiang Zan, Laima Luo, Yucheng Wu

Fusion Engineering and Design

DOI

2021

Effects of solid–liquid doping and spark plasma sintering on the microstructure and mechanical properties of Y2O3-doped copper matrix composites

Yongqiang Qin, Yu Ming Tian, Yi Zhuang, Laima Luo, Xiang Zan, Yucheng Wu

Vacuum

DOI

2021

Damage evolutions of completely recrystallized W–Y2O3 composite evaluated using the dual effects of electron beam thermal shock and helium ion irradiation

Gang Yao, Zhihao Zhao, Laima Luo, Jigui Cheng, Xiang Zan, Qiu Yu Xu, Yucheng Wu

Materials Chemistry and Physics

DOI

2021

Evolution of microstructure and texture in a warm-rolled yttria dispersion-strengthened tungsten plate during annealing in the temperature range between 1200 °C and 1350 °C

Kang Wang, Daya Ren, Xiang Zan, Laima Luo, Wolfgang Pantleon, Yucheng Wu

Journal of Alloys and Compounds

DOI

2021

Anisotropy and stability of the mechanical properties of the W alloy plate reinforced with Y-Zr-O particles and prepared by a wet chemical method

Zhihao Zhao, Gang Yao, Laima Luo, Xiang Zan, Qiu Yu Xu, Yucheng Wu

International Journal of Refractory Metals and Hard Materials

DOI

2021

Tensile fracture behavior and texture evolution of a hot-rolled W–Y2(Zr)O3 alloy

Zhihao Zhao, Gang Yao, Laima Luo, Xiang Zan, Qiu Yu Xu, Yucheng Wu

Journal of Nuclear Materials

DOI

2021

Study on preparation and properties of WC-8Co cemented carbide doped with rare earth oxide

Yu Yang, Lai Ma Luo, Xiang Zan, Xiao Yong Zhu, Liu Zhu, Yu Cheng Wu

International Journal of Refractory Metals and Hard Materials

DOI

2021

Effective joining between oxide dispersion strengthened tungsten-based material (ODS-W) and TZM alloy via spark plasma sintering technology

Dong–Guang Liu, Haoran Ma, Chong-Fei Ruan, Laima Luo, Xiang Zan, Zumin Wang, Yucheng Wu

Results in Materials

DOI

2021

Recrystallization behavior of pure tungsten hot-rolled with high accumulated strain during annealing at 1250 °C–1350 °C

Kang Wang, Daya Ren, Xiang Zan, Laima Luo, Xiao–Yong Zhu, Yucheng Wu

Materials Science and Engineering A

DOI

2020

Plasma-surface interaction experimental device: PSIEC and its first plasma exposure experiments on bulk tungsten and coatings

Yue Xu, Yunfeng Xu, Zuosheng Wu, Laima Luo, Xiang Zan, Gang Yao, Ya Xi, Yafeng Wang, Xiaoyu Ding, Hailin Bi, Xiao–Yong Zhu, Qiu Yu Xu, J. Wu, Yucheng Wu

Fusion Engineering and Design

DOI

2020

Evolution of microstructure and texture of moderately warm-rolled pure tungsten during annealing at 1300 °C

Kang Wang, Haitao Sun, Xiang Zan, Umberto Maria Ciucani, Wolfgang Pantleon, Laima Luo, Yucheng Wu

Journal of Nuclear Materials

DOI

2020

Research status and development trend of preparation technology of ceramic particle dispersion strengthened copper-matrix composites

Yongqiang Qin, Yu Ming Tian, Yu–Qiang Peng, Laima Luo, Xiang Zan, Qiu Yu Xu, Yucheng Wu

Journal of Alloys and Compounds

DOI

2020

Synthesis of Y2O3-doped WC-Co powders by wet chemical method and its effect on the properties of WC-Co cemented carbide alloy

Yu Yang, Laima Luo, Xiang Zan, Xiao-Yong Zhu, Liu Zhu, Yucheng Wu

International Journal of Refractory Metals and Hard Materials

DOI

2020

Preparation Technology of Ultra-Fine Tungsten Carbide Powders: An Overview

Yucheng Wu, Yu Yang, Xiao–Yue Tan, Laima Luo, Xiang Zan, Xiao–Yong Zhu, Qiu Yu Xu, Jigui Cheng

Frontiers in Materials

DOI

2020

Effect of Y2O3 on microstructure and mechanical properties of WC-Co-cemented carbides prepared via solid-liquid doping method and spark plasma sintering

Yongqiang Qin, Yu–Qiang Peng, Yu Ming Tian, Laima Luo, Yong Ma, Xiang Zan, Xiao-Yong Zhu, Yucheng Wu

Materials Today Communications

DOI

2020

A powder metallurgy route to fabricate CNT-reinforced molybdenum-hafnium-carbon composites

Yong Wei, Laima Luo, Huai-Bing Liu, Xiang Zan, J. Song, Qiu Yu Xu, Xiao-Yong Zhu, Yucheng Wu

Materials & Design

DOI

2020

Microstructural evolution and mechanical properties of carbon nanotubes–reinforced TZM composites synthesized by powder metallurgy

Yong Wei, Laima Luo, Xiang Zan, Jiupeng Song, Xiao–Yong Zhu, Yucheng Wu

Journal of Alloys and Compounds

DOI

2020

Transport parameters and permeation behavior of hydrogen isotopes in the first wall materials of future fusion reactors

Yue Xu, Zuosheng Wu, Laima Luo, Xiang Zan, Xiao–Yong Zhu, Qiu Yu Xu, Yucheng Wu

Fusion Engineering and Design

DOI

2020

Influence of helium ion irradiation damage behavior after laser thermal shock of W-2%vol Y2O3 composites

Gang Yao, Xiao–Yue Tan, Laima Luo, Xiang Zan, Yue Xu, Qiu Yu Xu, Xiao–Yong Zhu, Kazutoshi Tokunaga, Yucheng Wu

Progress in Nuclear Energy

DOI

2020

Surface damage during transient thermal load of 50% thickness reduced W-2% (Vol.) Y2O3 sheet with different recrystallization volume fraction

Xiang Zan, Jie Yan, Haitao Sun, Kang Wang, Youyun Lian, Xiao–Yue Tan, Laima Luo, Xiang Liu, Yucheng Wu

International Journal of Refractory Metals and Hard Materials

DOI

2019

机械球磨时间对W-Nb合金氦辐照行为的影响（英文）

罗来马，徐梦瑶，昝祥，徐虬，朱晓勇，刘家琴，程继贵，吴玉程

《稀有金属材料与工程》

2019

钼基材料的强韧化技术研究现状和发展趋势

罗来马，周宇芬，章宇翔，昝祥，刘家琴，朱晓勇，吴玉程

《中国有色金属学报》

DOI

2019

不同背压方式对静液挤压过程影响的模拟研究

洪凯骏，杜晟强，昝祥

《精密成形工程》

2019

粉末冶金Ti-47Al-2Nb-2Cr-0.2W金属间化合物的高温动态力学行为（英文）

欧阳思慧，刘彬，刘咏，昝祥，梁霄鹏，李争

Transactions of Nonferrous Metals Society of China

2019

Preparation and properties of FeAl/Al2O3 composite tritium permeation barrier coating on surface of 316L stainless steel

Jun Huang, Hao Xie, Laima Luo, Xiang Zan, Dong–Guang Liu, Yucheng Wu

Surface and Coatings Technology

DOI

2019

Deuterium irradiation resistance and relevant mechanism in W–ZrC/Sc2O3 composites prepared by spark plasma sintering

Gang Yao, Hongyu Chen, Ming-Qi Fu, Laima Luo, Xiang Zan, Qiu Yu Xu, Kazutoshi Tokunaga, Xiao–Yong Zhu, Yucheng Wu

Progress in Nuclear Energy

DOI

2019

Effect of annealing on the microstructure behavior of D+-irradiated W-2vol.%TiC composite prepared by wet-chemical method

Yu-Xiang Zhang, Xiao–Yue Tan, Xiang Zan, Laima Luo, Yue Xu, Qiu Yu Xu, Kazutoshi Tokunaga, Xiao–Yong Zhu, Yucheng Wu

Fusion Engineering and Design

DOI

2019

Microstructure evolutions of the W–TiC composite conducted by dual-effects from thermal shock and He-ion irradiation

Yu-Fen Zhou, Xiao–Yue Tan, Laima Luo, Yue Xu, Xiang Zan, Qiu Yu Xu, Kazutoshi Tokunaga, Xiao–Yong Zhu, Yucheng Wu

Tungsten

DOI

2019

Precipitation behavior of Ti-45Al-3Fe-2Mo-0.5C intermetallics after creep tests at 750 °C

Jingwen Qiu, Canxu Zhou, Bin Liu, Yong Liu, Huizhong Li, Xiaopeng Liang, Xiang Zan

Materials Characterization

DOI

2019

Dynamic tensile behavior of PM Ti−47Al−2Nb−2Cr−0.2W intermetallics at elevated temperatures

Sihui Ouyang, Bin Liu, Yong Liu, Xiang Zan, Xiaopeng Liang, Zheng Li

Transactions of Nonferrous Metals Society of China

DOI

2019

Recrystallization kinetics of 50% hot-rolled 2% Y2O3 dispersed tungsten

Xiang Zan, Mu Gu, Kang Wang, Laima Luo, Xiao–Yong Zhu, Yucheng Wu

Fusion Engineering and Design

DOI

2019

Effect of Y2O3 particles on the helium ion irradiation damage of W-2%Y2O3 composite prepared by wet chemical method

Gang Yao, Laima Luo, Xiao–Yue Tan, Xiang Zan, Qiu Yu Xu, Xiao-Yong Zhu, Eryang Lu, Xing-Zhong Cao, Jigui Cheng, Yucheng Wu

Materialia

DOI

2019

Combined effect of laser thermal shock and helium ion irradiation on W-Y2O3 composites

Yu-Xiang Zhang, Xiao–Yue Tan, Laima Luo, Yue Xu, Xiang Zan, Qiu Yu Xu, Kazutoshi Tokunaga, Xiao–Yong Zhu, Yucheng Wu

Fusion Engineering and Design

DOI

2019

Surface damage evolution during transient thermal shock of W-2%vol Y2O3 composite material in different surfaces

Gang Yao, Xiao–Yue Tan, Laima Luo, Kai-Jun Hong, Xiang Zan, Qiu Yu Xu, Xiao-Yong Zhu, Youyun Lian, Xiang Liu, Yucheng Wu

Fusion Engineering and Design

DOI

2019

Microstructure and Its High Temperature Oxidation Behavior of W-Cr Alloys Prepared by Spark Plasma Sintering

Qingqing Hou, Ke Huang, Laima Luo, Xiao–Yue Tan, Xiang Zan, Qiu Yu Xu, Xiao-Yong Zhu, Yucheng Wu

Materialia

DOI

2018

TiC含量对W-30Cu/TiC复合材料显微结构和性能的影响（英文）

谌景波，黄丽枚，罗来马，昝祥，吴玉程

《稀有金属材料与工程》

2018

自蔓延高温合成高熔点粉体的研究现状与发展

罗来马，章宇翔，昝祥，刘家琴，朱晓勇，吴玉程

《稀有金属》

2018

核聚变堆用钨及钨基材料热负荷损伤行为的研究进展

吴玉程，姚刚，罗来马，昝祥，朱晓勇，李萍，程继贵

《中国有色金属学报》

2018

第一壁材料用纳米结构氧化物弥散强化钢制备工艺及其性能研究进展

吴玉程，卫勇，罗来马，昝祥，朱晓勇，罗广南，陈俊凌

《核聚变与等离子体物理》

2018

Densification and microstructure evolution of W-TiC-Y2O3 during spark plasma sintering

Yu-Fen Zhou, Zhi-Yuan Zhao, Xiao–Yue Tan, Laima Luo, Yue Xu, Xiang Zan, Qiu Yu Xu, Kazutoshi Tokunaga, Xiao–Yong Zhu, Yu-Cheng Wu

International Journal of Refractory Metals and Hard Materials

DOI

2018

Preparation of ultrafine-grained/nanostructured tungsten materials: An overview

Yucheng Wu, Qingqing Hou, Laima Luo, Xiang Zan, Xiao–Yong Zhu, Ping Li, Qiu Yu Xu, Jigui Cheng, Guang–Nan Luo, Jun–Ling Chen

Journal of Alloys and Compounds

DOI

2018

Isotropic thermal conductivity in rolled large-sized W-Y2O3 bulk material prepared by powder metallurgy route and rolling deformation technology

Gang Yao, Xiao–Yue Tan, Ming-Qi Fu, Laima Luo, Xiang Zan, Qiu Yu Xu, Jiaqin Liu, Xiao–Yong Zhu, Jigui Cheng, Yucheng Wu

Fusion Engineering and Design

DOI

2018

Microstructure and transient laser thermal shock behavior of W–TiC–Y2O3 composites prepared by wet chemical method

Mengyao Xu, Laima Luo, Jin–Shan Lin, Yue Xu, Xiang Zan, Qiu Yu Xu, Kazutoshi Tokunaga, Xiao–Yong Zhu, Yucheng Wu

Journal of Alloys and Compounds

DOI

2018

Effect of laser beam thermal shock on the helium ion irradiation damage behavior of W-TiC-Y2O3 composites

Mengyao Xu, Laima Luo, Yue Xu, Xiang Zan, Qiu Yu Xu, Kazutoshi Tokunaga, Xiao–Yong Zhu, Yucheng Wu

Journal of Nuclear Materials

DOI

2018

An overview of oxidation-resistant tungsten alloys for nuclear fusion

Dong–Guang Liu, Liang Zheng, Laima Luo, Xiang Zan, Jiupeng Song, Qiu Yu Xu, Xiao–Yong Zhu, Yucheng Wu

Journal of Alloys and Compounds

DOI

2018

Helium irradiation behavior of tungsten-niobium alloys under different ion energies

Meng-Yao Xu, Laima Luo, Yu-Feng Zhou, Xiang Zan, Yue Xu, Qiu Yu Xu, Kazutoshi Tokunaga, Xiao–Yong Zhu, Yucheng Wu

Fusion Engineering and Design

DOI

2018

Influence of Nb content on the microstructure and deuterium retention of W–Nb alloys

Laima Luo, Jingbo Chen, Jin–Shan Lin, Xiang Zan, Xiao–Yong Zhu, Qiu Yu Xu, Yucheng Wu

Fusion Engineering and Design

DOI

2018

Microstructure and helium irradiation performance of W–ZrC/Sc 2 O 3 composites prepared spark plasma sintering

Hongyu Chen, Laima Luo, Xiang Zan, Qiu Yu Xu, Te Zhu, Jiaqin Liu, Jigui Cheng, Yucheng Wu

International Journal of Refractory Metals and Hard Materials

DOI

2018

Microstructure and damage behavior of W–Cr alloy under He irradiation

Ke Huang, Laima Luo, Xiang Zan, Qiu Yu Xu, Dong–Guang Liu, Xiao–Yong Zhu, Jigui Cheng, Yucheng Wu

Journal of Nuclear Materials

DOI

2018

Numerical Simulation and Experimental Research of the Hydrostatic Extrusion Process of Pure Tungsten

Shengqiang Du, Kai-Jun Hong, Xiang Zan, Ping Li, Laima Luo, Yang Yu, Yucheng Wu

Springer proceedings in energy

DOI

2017

W/Si复合材料的制备及抗激光冲击性能

陈泓谕，罗来马，林锦山，昝祥，朱晓勇，吴玉程

《中国有色金属学报》

2017

不同轧制比纯钨1250～1350℃下的再结晶行为

余明，王康，昝祥，罗来马，吴玉程

《材料热处理学报》

2017

Preparation and properties of fine-grained and ultrafine-grained W-TiC-Y2O3 composite

Jin–Shan Lin, Laima Luo, Ke Huang, Xiang Zan, Qiu Yu Xu, Jiaqin Liu, Xiao-Yong Zhu, Jigui Cheng, Yucheng Wu

Fusion Engineering and Design

DOI

2017

Preparation of TiC-doped W-Ti alloy and heat flux performance test under laser beam facility

Jing Shi, Laima Luo, Shuang Wang, Wei-Qi Pan, Qiu Yu Xu, Xiang Zan, Xiao–Yong Zhu, Jigui Cheng, Yucheng Wu

Fusion Engineering and Design

DOI

2017

Thermal shock behavior of W–ZrC/Sc2O3 composites under two different transient events by electron and laser irradiation

Hongyu Chen, Laima Luo, Xiang Zan, Qiu Yu Xu, Kazutoshi Tokunaga, Jia-Qin Liu, Xiao–Yong Zhu, Ji-Gui Cheng, Yucheng Wu

Journal of Nuclear Materials

DOI

2017

Transient thermal shock behavior of W–Zr/Sc2O3 composites prepared via spark plasma sintering

Hongyu Chen, Laima Luo, Xiang Zan, Qiu Yu Xu, Kazutoshi Tokunaga, Jia-Qin Liu, Dong–Guang Liu, Xiao–Yong Zhu, Ji-Gui Cheng, Yucheng Wu

Fusion Engineering and Design

DOI

2017

Repair behavior of He+-irradiated W–Y2O3 composites after different temperature-isochronal annealing experiments

Gang Yao, Xiao–Yue Tan, Laima Luo, Xiang Zan, Jiaqin Liu, Qiu Yu Xu, Xifao-Yong Zhu, Yucheng Wu

Nuclear Instruments and Methods in Physics Research Section B Beam Interactions with Materials and Atoms

DOI

2017

Microstructure and performances of W–TiC–Y2O3 composites prepared by mechano-chemical and wet-chemical methods

Jin–Shan Lin, Yuchen Hao, Laima Luo, Meiling Zhao, Qiu Yu Xu, Xiang Zan, Xiao–Yong Zhu, Yucheng Wu

Journal of Alloys and Compounds

DOI

2017

Investigation of W–B behavior during short transient events by laser irradiation

Hongyu Chen, Laima Luo, Xiang Zan, Qiu Yu Xu, Xiao-Yong Zhu, Yucheng Wu

Fusion Engineering and Design

DOI

2017

Hardness loss and microstructure evolution of 90% hot-rolled pure tungsten at 1200–1350 °C

Mingquan Yu, Kang Wang, Xiang Zan, Wolfgang Pantleon, Laima Luo, Xiao–Yong Zhu, Yucheng Wu

Fusion Engineering and Design

DOI

2017

Microstructure and deuterium retention after ion irradiation of W–Lu 2 O 3 composites

Jin–Shan Lin, Laima Luo, Qiu Yu Xu, Xiang Zan, Te Zhu, Yucheng Wu

Journal of Nuclear Materials

DOI

2017

Effects of thickness reduction on recrystallization process of warm-rolled pure tungsten plates at 1350 °C

Kang Wang, Xiang Zan, Mingquan Yu, Wolfgang Pantleon, Laima Luo, Xiao–Yong Zhu, Ping Li, Yucheng Wu

Fusion Engineering and Design

DOI

2017

Comparison of Hydrostatic Extrusion between Pressure-Load and Displacement-Load Models

Shengqiang Du, Xiang Zan, Ping Li, Laima Luo, Xiao–Yong Zhu, Yucheng Wu

Metals

DOI

2016

掺杂合金元素面向等离子体钨基材料的研究现状与发展趋势

罗来马，施静，昝祥，李萍，罗广南，陈俊凌，吴玉程

《中国有色金属学报》

2016

W-Ni/Yb2O3复合材料的制备及烧结性能

赵美玲，罗来马，王爽，谭晓月，朱晓勇，昝祥，吴玉程

《稀有金属材料与工程》

2016

Damage behavior of REE-doped W-based material exposed to high-flux transient heat loads

Jing Shi, Laima Luo, Jin–Shan Lin, Xiang Zan, Xiao–yong Zhu, Qiu Yu Xu, Yucheng Wu

Fusion Engineering and Design

DOI

2016

Chemical Synthesis and Oxide Dispersion Properties of Strengthened Tungsten via Spark Plasma Sintering

Xiaoyu Ding, Laima Luo, Hongyu Chen, Xiao–Yong Zhu, Xiang Zan, Jigui Cheng, Yucheng Wu

Materials

DOI

2016

Influence of ball milling processing on the microstructure and characteristic of W–Nb alloy

Jingbo Chen, Laima Luo, Jin–Shan Lin, Xiang Zan, Xiao–Yong Zhu, Guang–Nan Luo, Yucheng Wu

Journal of Alloys and Compounds

DOI

2016

Microstructure and performance of rare earth element-strengthened plasma-facing tungsten material

Laima Luo, Jing Shi, Jin–Shan Lin, Xiang Zan, Xiao–Yong Zhu, Qiu Yu Xu, Yucheng Wu

Scientific Reports

DOI

2016

Effects of zirconium element on the microstructure and deuterium retention of W–Zr/Sc2O3 composites

Hongyu Chen, Laima Luo, Jingbo Chen, Xiang Zan, Xiao–Yong Zhu, Qiu Yu Xu, Guang–Nan Luo, Junling Chen, Yucheng Wu

Scientific Reports

DOI

2016

Effect of mechanical alloying on the microstructure and properties of W–Ti alloys fabricated by spark plasma sintering

Shuang Wang, Laima Luo, Jing Shi, Xiang Zan, Xiao–Yong Zhu, Guang–Nan Luo, Yucheng Wu

Powder Technology

DOI

2016

Effect of second-phase particles on the properties of W-based materials under high-heat loading

Xiao–Yue Tan, Ping Li, Laima Luo, Qiu Yu Xu, Kazutoshi Tokunaga, Xiang Zan, Yucheng Wu

Nuclear Materials and Energy

DOI

2016

Thermal shock behavior of W-0.5 wt% Y2O3 alloy prepared via a novel chemical method

Meiling Zhao, Laima Luo, Jing-Shan Lin, Xiang Zan, Xiao-Yong Zhu, Guang–Nan Luo, Yucheng Wu

Journal of Nuclear Materials

DOI

2016

Investigation of microstructure and irradiation behavior of W–Nb/Ti composites prepared by spark plasma sintering

Jingbo Chen, Laima Luo, Meiling Zhao, Qiu Yu Xu, Xiang Zan, Yucheng Wu

Fusion Engineering and Design

DOI

2016

Properties of Lu2O3 doped tungsten and thermal shock performance

Shuang Wang, Jun Zhang, Laima Luo, Xiang Zan, Qiu Yu Xu, Xiao–Yong Zhu, Kazutoshi Tokunaga, Yucheng Wu

Powder Technology

DOI

2016

Mechanical Properties and Microstructure of the CoCrFeMnNi High Entropy Alloy Under High Strain Rate Compression

Bingfeng Wang, Ao Fu, Xiaoxia Huang, Bin Liu, Yong Liu, Zezhou Li, Xiang Zan

Journal of Materials Engineering and Performance

DOI

2016

Microstructure and properties of TiN-reinforced W–Ti alloys prepared by spark plasma sintering

Shuang Wang, Laima Luo, Meiling Zhao, Xiang Zan, Xiao-Yong Zhu, Guang–Nan Luo, Yucheng Wu

Powder Technology

DOI

2016

Fabrication of W-Cu/Lu2O3 Composites with High Strength and Electrical Conductivity Prepared by Electroless Plating and Powder Metallurgy

Ze Long Lu, Lai Ma Luo, Jun Zhang, Yong Qing Qin, Xin Min Huang, Guang-Nan Luo, Xiao Yong Zhu, Xiang Zan, Ji Gui Cheng, Yu Cheng Wu

Materials science forum

DOI

2015

化学镀和粉末冶金法制备W-15Cu复合材料及性能研究（英文）

罗来马，谭晓月，卢泽龙，罗广南，昝祥，程继贵，吴玉程

《稀有金属材料与工程》

2015

活化处理对W-1.5% TiC复合粉体烧结行为影响规律研究

丁孝禹，罗来马，黄丽枚，罗广南，昝祥，朱晓勇，吴玉程

《稀有金属材料与工程》

2015

应变率对等温锻造TiAl基合金脆韧转变特性的影响

昝祥，杨政，欧阳力，贺跃辉，吴玉程

《合肥工业大学学报(自然科学版)》

2015

Investigation on W/Fe diffusion bonding using Ti foil and Ti powder interlayer by SPS

Hongyu Chen, Laima Luo, Jun Zhang, Xiang Zan, Xiao–Yong Zhu, Guang–Nan Luo, Yucheng Wu

Journal of Nuclear Materials

DOI

2015

Effect of mechanical milling on the microstructure of tungsten under He+ irradiation condition

Xiao–Yue Tan, Ping Li, Laima Luo, Hongyu Chen, Xiang Zan, Te Zhu, Guang–Nan Luo, Yucheng Wu

Fusion Engineering and Design

DOI

2015

Mechanical properties and microstructural change of W–Y2O3 alloy under helium irradiation

Xiao–Yue Tan, Laima Luo, Hongyu Chen, Xiao–Yong Zhu, Xiang Zan, Guang–Nan Luo, Junling Chen, Ping Li, Jigui Cheng, Dongping Liu, Yucheng Wu

Scientific Reports

DOI

2015

The constitutive responses of Ti-6.6Al-3.3Mo-1.8Zr-0.29Si alloy at high strain rates and elevated temperatures

Jun Zhang, Yang Wang, Yang Wang, Xiang Zan, Yu Wang, Yu Wang

Journal of Alloys and Compounds

DOI

2015

Effects of TiN nanoparticles on the microstructure and properties of W–30Cu composites prepared via electroless plating and powder metallurgy

Limei Huang, Laima Luo, Meiling Zhao, Guang–Nan Luo, Xiao–Yong Zhu, Jigui Cheng, Xiang Zan, Yucheng Wu

Materials & Design (1980-2015)

DOI

2015

Synthesis and formation mechanism of W/TiC composite powders by a wet chemical route

Xiao–Yue Tan, Laima Luo, Hongyu Chen, Ping Li, Guang–Nan Luo, Xiang Zan, Jigui Cheng, Yucheng Wu

Powder Technology

DOI

2015

Fabrication of W–1 wt.% TiC composites by spark plasma sintering

Xiaoyu Ding, Laima Luo, Hongyu Chen, Guang–Nan Luo, Xiao-Yong Zhu, Xiang Zan, Jigui Cheng, Yucheng Wu

Fusion Engineering and Design

DOI

2014

钨铜复合材料的研究进展

黄丽枚，罗来马，丁孝禹，罗广南，昝祥，洪雨，吴玉程

《机械工程材料》

2014

第一壁材料W/Cu界面设计与制备研究现状

罗来马，谭晓月，罗广南，昝祥，朱晓勇，吴玉程

《核聚变与等离子体物理》

2014

Effect of doped niobium on the microstructure and properties of W–Nb/TiC composites prepared by spark plasma sintering

Laima Luo, Jingbo Chen, Hongyu Chen, Guang–Nan Luo, Xiao–Yong Zhu, Jigui Cheng, Xiang Zan, Yucheng Wu

Fusion Engineering and Design

DOI

2014

Development of tungsten as plasma-facing materials by doping tantalum carbide nanoparticles

Xiao–Yue Tan, Laima Luo, Ze-Long Lu, Guang–Nan Luo, Xiang Zan, Jigui Cheng, Yucheng Wu

Powder Technology

DOI

2014

Effect of doped Lu2O3 on the microstructures and properties of tungsten alloy prepared by spark plasma sintering

Jun Zhang, Laima Luo, Xiao-Yong Zhu, Hongyu Chen, Junling Chen, Xiang Zan, Jigui Cheng, Yucheng Wu

Journal of Nuclear Materials

DOI

2014

Influence of TiN nanoparticles on the microstructure and properties of W matrix materials prepared by spark plasma sintering

Shuang Wang, Laima Luo, Xiao–Yue Tan, Guang–Nan Luo, Xiang Zan, Jigui Cheng, Xiao-Yong Zhu, Yucheng Wu

Journal of Nuclear Materials

DOI

2014

Fabrication of W–Cu/La2O3 composite powder with a novel pretreatment prepared by electroless plating and its sintering characterization

Laima Luo, Ze-Long Lu, Huang Xin-min, Xiao–Yue Tan, Guang–Nan Luo, Jigui Cheng, Xiang Zan, Xiao-Yong Zhu, Yucheng Wu

International Journal of Refractory Metals and Hard Materials

DOI

2014

Study on activated W powders by chemical activation pretreatment and its sintering behavior

Xiaoyu Ding, Laima Luo, Limei Huang, Xiao–Yue Tan, Hao Li, Guang–Nan Luo, Xiang Zan, Yu Hong, Jigui Cheng, Yucheng Wu

International Journal of Refractory Metals and Hard Materials

DOI

2014

Microstructure and properties of tungsten–samarium oxide composite prepared by a novel wet chemical method and spark plasma sintering

Xiaoyu Ding, Laima Luo, Xiao–Yue Tan, Guang–Nan Luo, Ping Li, Xiang Zan, Jigui Cheng, Yucheng Wu

Fusion Engineering and Design

DOI

2014

Effects of simplified pretreatment process on the morphology of W–Cu composite powder prepared by electroless plating and its sintering characterization

Limei Huang, Laima Luo, Xiaoyu Ding, Guang–Nan Luo, Xiang Zan, Jigui Cheng, Yucheng Wu

Powder Technology

DOI

2013

稀土改性钨合金的研究现状与发展趋势

罗来马，卢泽龙，李浩，罗广南，昝祥，吴玉程

《稀有金属》

2013

国际热核试验堆第一壁材料的研究进展

丁孝禹，李浩，罗来马，黄丽枚，罗广南，昝祥，朱晓勇，吴玉程

《机械工程材料》

2013

高温动态拉伸下NG TiAl弹塑性行为的数值模拟

王东，李子然，昝祥

Journal of University of Science and Technology of China

2013

Microstructure Evolution of TiAl under Tensile Impact Loadings

Xiang Zan, Li Ouyang, Yu Wang, Yue Hui He, Yong Liu, Weidong Song

Materials science forum

DOI

2013

Sintering behavior of W–30Cu composite powder prepared by electroless plating

Laima Luo, Xiao–Yue Tan, Ze-Long Lu, Xiao-Yong Zhu, Xiang Zan, Guang–Nan Luo, Yucheng Wu

International Journal of Refractory Metals and Hard Materials

DOI

2013

PREPARATION OF ULTRAFINE W – Cu COMPOSITE POWDER USING ULTRASONIC-ASSISTED ELECTROLESS PLATING

Limei Huang, Laima Luo, Xiaoyu Ding, Xiang Zan, Yu Hong, Jigui Cheng, Yucheng Wu, Guang–Nan Luo, Liu Zhu

Modern Physics Letters B

DOI

2013

Microstructure Evolution of Ti-46.5Al-2Nb-2Cr at Different Strain Rates and Temperatures

Xiang Zan, Yu Wang, Yue Hui He, Yong Liu, Weidong Song

Key engineering materials

DOI

2012

晶界对近片层TiAl高温动态力学行为的数值模拟

卢山，李子然，昝祥

《中国有色金属学报》

2012

Microstructure Evolution of Dynamic Recrystallization of 42CrMo Steel during Multi-Stage Forging by FEM

Dong Yeol Yang, Wen Lin Chen, Rui Zhou, Shao Yang Wang, Yong Ma, Xiang Zan, Peng Li

Applied Mechanics and Materials

DOI

2012

Numerical simulation of dynamic mechanical behavior of near lamellar TiAl at elevated temperature with influence of grain boundary

Xiang Zan

The Chinese Journal of Nonferrous Metals

2011

冲击拉伸加载下等轴TiAl的微观组织演化行为

昝祥，贺跃辉，卢正欣，汪洋，夏源明

《粉末冶金材料科学与工程》

2011

不同微观组织TiAl金属间化合物高温动态力学行为与断裂特性(英文)

昝祥，贺跃辉，汪洋，夏源明

Transactions of Nonferrous Metals Society of China

2011

Dynamic behavior and fracture mode of TiAl intermetallics with different microstructures at elevated temperatures

Xiang Zan, Yuehui He, Yang Wang, Yuanming Xia

Transactions of Nonferrous Metals Society of China

DOI

2010

用于动态断裂试验的高温炉设计及温度场模拟

许文君，昝祥，汪洋，宫能平

《安徽理工大学学报(自然科学版)》

2008

三种微观组织的Ti-46.5Al-2Nb-2Cr高温动态力学行为的实验研究

昝祥，汪洋，夏源明，贺跃辉

《实验力学》

2005

高温冲击拉伸试验中的快速接触加温技术

昝祥，陈晓宏，黄文，夏源明

《实验力学》

2003

固相烧结多孔碳化硅的光致发光及电阻率

昝祥，陈治明，马剑平，封先锋，蒲红斌

《西安理工大学学报》

会议论文

2014

化学镀法制备超细W-Cu复合粉体

谭晓月，罗来马，黄丽枚，朱晓勇，昝祥，吴玉程

《安徽省机械工程学会第八次会员代表大会暨学会成立50周年庆典》

预印本

2025

Microstructure and Performance Study of WC-12Co Cemented Carbide Fabricated by Material Extrusion Additive Manufacturing

Laima Luo, Min–Hui Wang, Yongqiang Qin, Xiang Zan, Yucheng Wu

SSRN Electronic Journal

DOI

书籍章节

2014

Microstructure and properties of W-TiC/Cf composites prepared by spark plasma sintering

Huilin Chen, Laima Luo, Xiao–Yue Tan, Guang–Nan Luo, Ping Li, Xiang Zan, Xiao–Yong Zhu, Yang Wu

Elsevier eBooks

DOI

此主页由公开资料整理，尚未经学者本人认领。