蓝慧芳｜东北大学｜学者主页

2026

基于自动机器学习的汽车用热镀锌钢板力学性能预测

童李洋辰，蓝慧芳，李明，郑成东，任慧彬，唐帅

《锻压技术》

2026

淬火温度对27CrMnB履带钢磨损性能的影响

柴湘雨，霍喜伟，宋玉卿，李承，蓝慧芳，杜林秀

《金属热处理》

DOI

2026

Nb-Ti系冷轧低合金高强钢退火过程中的再结晶行为及强化机制

裴冠博，惠晓莹，杜江波，徐鹏力，史浩冉，蓝慧芳

《材料热处理学报》

DOI

2026

试验参数对含Ti微合金钢扩孔性能的影响

张宗学，蓝慧芳，胡珂，唐帅

《锻压技术》

2026

Effect of Cr on the Dynamic Recrystallization Behavior of Austenite and Ti(C,N) Precipitation in Ti‐Microalloyed Steel During High‐Temperature Deformation

Jie Xiong, Huifang Lan, Shuai Tang, Zhenyu Liu, Guodong Wang

steel research international

DOI

2026

Tailoring retained austenite characteristics and mechanical properties in bainitic steel through designed hot-rolled initial microstructures

Tong Li, Xiuhua Gao, Yuxuan Qiao, Guoqing Feng, Wang Li, Chang Liu, Huifang Lan, Haoqing Zheng, Zhiwei Liu

Journal of Materials Research and Technology

DOI

2026

Hydrogen Segregation at the Coherent α-Fe/V4C3 Interface: First-Principles Insights into the Role of Carbon Vacancies

Lin-xian Li, Aoxuan Guo, Jiamin Liu, Huifang Lan, Shuai Tang, Z B Liu, Guodong Wang

Nanomaterials

DOI

2026

Influence of annealing temperature on microstructure evolution and strength-ductility trade-off in warm-rolled Ti-6Al-4V thin strips

Huifang Lan, Zhipeng Guo, Shuai Tang, Jianping Li

Materials Today Communications

DOI

2026

Carbon vacancy network mediated hydrogen trapping at the α-Fe/VC interface

Lin-xian Li, Huifang Lan, Shuai Tang, Fengliang Tan, Qing Peng, Z. Y. Liu, Guodong Wang

Physical Chemistry Chemical Physics

DOI

2026

First-principles investigation of alloying element effects on hydrogen trapping and diffusion at the α-Fe/VC interface and within the VC bulk

Lin-xian Li, Huifang Lan, Shuai Tang, Qing Peng, Zhen-Yu Liu, Guodong Wang

Physical Chemistry Chemical Physics

DOI

2025

热处理工艺对27CrMnB履带钢组织与性能的影响

霍喜伟，宋玉卿，柴湘雨，李承，蓝慧芳，杜林秀

《材料热处理学报》

DOI

2025

连续退火工艺对塑性增强型复相钢组织的影响

孟原，苏冠侨，蓝慧芳，高秀华，李通，刘珍光，于驰

《轧钢》

DOI

2025

700 MPa钒微合金化车轮钢TMCP工艺及性能研究

苏少文，高彩茹，崔凯禹，蓝慧芳，杜林秀

《热加工工艺》

DOI

2025

Austenite Formation Kinetics of Dual-Phase Steels: Insights from a Mixed-Control Model Under Different Heating Conditions

Huifang Lan, Xiaoying Hui, Jiangbo Du, Shuai Tang, Linxiu Du

Modelling—International Open Access Journal of Modelling in Engineering Science

DOI

2025

High-performance on-line repair of subsea pipeline steel via underwater direct metal deposition: Microstructure evolution and mechanical properties

Zhandong Wang, Chunke Wang, Linzhong Wu, Zhiyuan Jia, Mingzhi Chen, Huifang Lan, Guifang Sun

Materials Science and Engineering A

DOI

2025

Tailoring bainitic transformation and mechanical properties in high-strength steel via Mn-induced chemical heterogeneity

Huifang Lan, Siyu Liu, Ping Xu, Shuai Tang, Linxiu Du

Materials Letters

DOI

2025

Enhanced strength-ductility synergy in cold-rolled Bainitic steel: Insights into the influence of slow cooling

Huifang Lan, Siyu Liu, Shuai Tang, Yunlong Ma, Linxiu Du

Ironmaking & Steelmaking Processes Products and Applications

DOI

2025

Study of a bainite-based quenching and partitioning process for regulating the stability of RA

Tong Li, Xiuhua Gao, Yuxuan Qiao, Haoqing Zheng, Guoqing Feng, Wang Li, Chang Liu, Huifang Lan

Materials Science and Engineering A

DOI

2024

Fe-C-Mn-Si-Al双相钢两相区加热过程中的奥氏体相变行为研究

谢钊远，林关强，王定峰，蓝慧芳

《热加工工艺》

2024

Study on the Formation and Mechanical Stability of Retained Austenite in Complex Phase Steel with High Formability

Tong Li, Xiuhua Gao, Yuan Meng, Wang Li, Huifang Lan, R.D.K. Misra

steel research international

DOI

2024

Investigation of thermal and fluid dynamics behaviors of melt pool during laser direct metal deposition on inclined substrates

Kai Zhao, Mingzhi Chen, Zhandong Wang, Rui Li, Zhiyuan Jia, Huifang Lan, Guifang Sun

Materials Today Communications

DOI

2024

Influence of Intercritical Annealing on Microstructure, Ductility, and Toughness of Medium Mn Steels

Huifang Lan, Guanqiang Lin, Yunlong Ma, Bin Hu, Linxiu Du

Journal of Materials Engineering and Performance

DOI

2024

First-principles study of hydrogen trapping and diffusion mechanisms in vanadium carbide with connecting carbon vacancies

Lin-xian Li, Huifang Lan, Shuai Tang, Haile Yan, Fengliang Tan, Sybrand van der Zwaag, Qing Peng, Zhenyu Liu, Guodong Wang

International Journal of Hydrogen Energy

DOI

2024

Unlocking the Mechanisms behind Austenite Formation of Cold‐Rolled Ferrite–Martensite Dual‐Phase Steels: The Role of Ferrite Recrystallization

Huifang Lan, Shuai Tang, Jianping Li, Linxiu Du

steel research international

DOI

2023

一种铁素体-奥氏体相变动力学模型

蓝慧芳，柳泽阳，武梦如

《东北大学学报(自然科学版)》

2023

Study on microstructure evolution, mechanical properties and deformation mechanism of Ti-6Al-4V alloy by hydraulic tension on-line warm rolling

Qiang-qiang Zhu, Huifang Lan, Baosen Lin, Dong-xiao Wang, Su Huang, Yuyong Chen, Xing-di Yang, Jianping Li

Journal of Alloys and Compounds

DOI

2023

Effect of initial grain size on the microstructure and mechanical properties of vacuum solution treated Ti–6Al–4V alloy

Qiang-qiang Zhu, Su Huang, Huifang Lan, Wenyong Niu, Tao Sun, Gui-qiao Wang, Xing-di Yang, Jianping Li

Vacuum

DOI

2023

Preparation of high performance Ti–6Al–4V alloy thin strip by on-line warm rolling and study of its microstructure evolution and mechanical properties

Qiang-qiang Zhu, Su Huang, Wenyong Niu, Huifang Lan, Tao Sun, Gui-Qiao Wang, Xing-di Yang, Jian-ping Li

Journal of Materials Research and Technology

DOI

2023

Formation mechanism and microstructure evolution of light etched region during rolling contact fatigue in M50 steel

Xingyu Lu, Lina Zhou, Chengshuai Lei, Hongwei Liu, Huifang Lan

Journal of Materials Research and Technology

DOI

2023

Microstructure Characteristics and Mechanical Properties of Flash Butt Welded 590 MPa V-N Microalloyed Heavy-Duty Truck Wheel Steel

Cairu Gao, Kaiyu Cui, Huifang Lan, Tao Liu, Linxiu Du, Yujiao Ma, Xinxin Guo, Chenshuo Cui

Metals

DOI

2023

Effect of solution treatments on microstructure and mechanical properties of Ti–6Al–4V alloy hot rolled sheet

Qiang-qiang Zhu, Xingdi Yang, Huifang Lan, Dongxiao Wang, Hongtao Lou, Jianping Li

Journal of Materials Research and Technology

DOI

2023

In-situ Observation of High-temperature Phase Transformation of Ti-6Al-4V Titanium Alloy

Qiang-qiang Zhu, Xingdi Yang, Huifang Lan, Jianping Li, Tianxing Zhang

Journal of Physics Conference Series

DOI

2022

铁素体区等温过程中Ti-Mo-Cu微合金钢中的共析出行为

唐帅，蓝慧芳，段磊，金剑锋，李建平，刘振宇，王国栋

《金属学报》

2022

Microstructure, crystallography, mechanical and damping properties of a low-carbon bainitic steel austempered at various temperatures

Chunxia Yao, Huifang Lan, Zhen Tao, Min Qi, Linxiu Du

Journal of Materials Science

DOI

2021

The Significance of Mn Prepartitioning on Bainitic Transformation and Mechanical Properties of a Low‐Carbon Bainitic Steel

Chunxia Yao, Huifang Lan, Zhen Tao, Raja Devesh Kumar Misra, Linxiu Du

steel research international

DOI

2021

Modelling and experimental validation of austenite growth from As-quenched martensite during intercritical annealing of a medium-Mn steel

Guanqiang Lin, Huifang Lan, Linxiu Du

Journal of Materials Science

DOI

2021

Enhanced Strength and Toughness of Low‐Carbon Bainitic Steel by Refining Prior Austenite Grains and Austempering Below Ms

Chunxia Yao, Huifang Lan, Zhen Tao, Raja Devesh Kumar Misra, Linxiu Du

steel research international

DOI

2021

Effect of pulse frequency on the morphology, microstructure, and corrosion resistance of high‑nitrogen steel prepared by laser directed energy deposition

Kun Yang, Zhandong Wang, Mingzhi Chen, Huifang Lan, Guifang Sun, Zhonghua Ni

Surface and Coatings Technology

DOI

2021

Effect of the Initial Microstructure and Thermal Path on the Final Microstructure and Bendability of a High Strength Ferrite-martensite Dual Phase Steel

Huifang Lan, Shuai Tang, Linxiu Du, Jianping Li, Sybrand van der Zwaag

ISIJ International

DOI

2021

Investigation of the underwater laser directed energy deposition technique for the on-site repair of HSLA-100 steel with excellent performance

Zhandong Wang, Guifang Sun, Mingzhi Chen, Y. Lu, S.B. Zhang, Huifang Lan, Kedong Bi, Zhonghua Ni

Additive manufacturing

DOI

2021

High-performance Ti-6Al-4V with graded microstructure and superior properties fabricated by powder feeding underwater laser metal deposition

Zhandong Wang, Guifang Sun, Y. Lu, Mingzhi Chen, Huifang Lan, Kedong Bi, Z.H. Ni

Surface and Coatings Technology

DOI

2021

Enhancement of Balance in Strength, Ductility, and Stretch Flangeability by Two-Step Austempering in a 1000 MPa Grade Cold Rolled Bainitic Steel

Shuai Tang, Huifang Lan, Zhenyu Liu, Guodong Wang

Metals

DOI

2020

Melt pool evolution on inclined NV E690 steel plates during laser direct metal deposition

Mingzhi Chen, Yi Lu, Zhandong Wang, Huifang Lan, Guifang Sun, Zhonghua Ni

Optics & Laser Technology

DOI

2020

The Role of Microstructural Constituents on Strength–Ductility–Local Formability of a Transformation‐Induced‐Plasticity‐Aided Bainitic Steel

Shuai Tang, Huifang Lan, Jianping Li, Zhenyu Liu, Guodong Wang

steel research international

DOI

2019

等温淬火工艺对超高强贝氏体钢组织性能影响

姚春霞，蓝慧芳，杜林秀

《东北大学学报(自然科学版)》

2019

奥氏体化条件对高强度贝氏体钢相变动力学的影响

英焕岩，刘昊炎，蓝慧芳，柳萌

《热加工工艺》

DOI

2017

Improvement of strength-toughness combination in austempered low carbon bainitic steel: The key role of refining prior austenite grain size

Huifang Lan, Linxiu Du, Qiang Li, Chunlin Qiu, J.P. Li, R.D.K. Misra

Journal of Alloys and Compounds

DOI

2015

Microstructural evolution and mechanical properties of low-carbon steel treated by a two-step quenching and partitioning process

Shu Ai Yan, Xianghua Liu, Wayne J. Liu, Huifang Lan, Hongyan Wu

Materials Science and Engineering A

DOI

2014

热轧冷却方式和冷轧压下率对含钛IF钢冷轧板组织和力学性能的影响

王敏莉，秦炜，杜江波，蓝慧芳

《机械工程材料》

2014

Effect of Austempering Route on Microstructural Characterization of Nanobainitic Steel

Huifang Lan, Linxiu Du, Na Zhou, Xianghua Liu

Metals Advances

2014

Fabrication and Microstructural Control of Nano-structured Bulk Steels: A Review

Linxiu Du, Shengjie Yao, Jun Ping Hu, Huifang Lan, Hui Xie, Guodong Wang

Acta Metallurgica Sinica (English Letters)

DOI

2014

Comparison on mechanical properties and microstructure of a C–Mn–Si steel treated by quenching and partitioning (Q&P) and quenching and tempering (Q&T) processes

Shu Ai Yan, Xianghua Liu, Wayne J. Liu, Huifang Lan, Hongyan Wu

Materials Science and Engineering A

DOI

2014

Effect of microstructural constituents on strength–toughness combination in a low carbon bainitic steel

Huifang Lan, Linxiu Du, R.D.K. Misra

Materials Science and Engineering A

DOI

2014

Effect of Austempering Route on Microstructural Characterization of Nanobainitic Steel

Huifang Lan, Linxiu Du, Na Zhou, Xianghua Liu

Acta Metallurgica Sinica (English Letters)

DOI

2013

含Cu低碳钢Q&P工艺处理的组织性能与强化机理

闫述，刘相华，刘伟杰，蓝慧芳，吴红艳

《金属学报》

2012

Ultrafine Grained Steels with Improved Ductility Fabricated by Repetitive Thermo‐Mechanical Processing

Huifang Lan, Linxiu Du, Xiaonan Wang, Xianghua Liu

steel research international

DOI

2009

控轧控冷工艺对高强度结构钢组织及力学性能的影响

蓝慧芳，杜林秀，刘彦春，刘相华

《东北大学学报(自然科学版)》

2009

工艺参数对高强度钢强度及韧性的影响

蓝慧芳，杜林秀，李卓，刘彦春，刘相华

《材料热处理学报》

DOI

2009

钢材品种升级——从低合金高强度到低成本高性能

刘相华，周满春，于明，杜林秀，蓝慧芳

《锻压技术》

2009

High performance low cost steels with ultrafine grained and multi-phased microstructure

Xianghua Liu, Huifang Lan, Linxiu Du, Weijie Liu

Science China Technological Sciences

DOI

2008

马氏体冷轧—回火制备超细晶钢及其热稳定性

蓝慧芳，刘相华

《材料研究学报》

2008

终冷温度对高强度工程机械用钢性能的影响

蓝慧芳，杜林秀，刘彦春，刘相华，王国栋

《机械工程材料》

2007

Ultrafine Ferrite Grains Produced by Tempering Cold-rolled Martensite in Low Carbon and Microalloyed Steels

Huifang Lan, W. J. Liu, X. H. Liu

ISIJ International

DOI

精选作品

期刊论文

基于自动机器学习的汽车用热镀锌钢板力学性能预测

淬火温度对27CrMnB履带钢磨损性能的影响

Nb-Ti系冷轧低合金高强钢退火过程中的再结晶行为及强化机制

试验参数对含Ti微合金钢扩孔性能的影响

Effect of Cr on the Dynamic Recrystallization Behavior of Austenite and Ti(C,N) Precipitation in Ti‐Microalloyed Steel During High‐Temperature Deformation

Tailoring retained austenite characteristics and mechanical properties in bainitic steel through designed hot-rolled initial microstructures

Hydrogen Segregation at the Coherent α-Fe/V4C3 Interface: First-Principles Insights into the Role of Carbon Vacancies

Influence of annealing temperature on microstructure evolution and strength-ductility trade-off in warm-rolled Ti-6Al-4V thin strips

Carbon vacancy network mediated hydrogen trapping at the α-Fe/VC interface

First-principles investigation of alloying element effects on hydrogen trapping and diffusion at the α-Fe/VC interface and within the VC bulk

热处理工艺对27CrMnB履带钢组织与性能的影响

连续退火工艺对塑性增强型复相钢组织的影响

700 MPa钒微合金化车轮钢TMCP工艺及性能研究

Austenite Formation Kinetics of Dual-Phase Steels: Insights from a Mixed-Control Model Under Different Heating Conditions

High-performance on-line repair of subsea pipeline steel via underwater direct metal deposition: Microstructure evolution and mechanical properties

Tailoring bainitic transformation and mechanical properties in high-strength steel via Mn-induced chemical heterogeneity

Enhanced strength-ductility synergy in cold-rolled Bainitic steel: Insights into the influence of slow cooling

Study of a bainite-based quenching and partitioning process for regulating the stability of RA

Fe-C-Mn-Si-Al双相钢两相区加热过程中的奥氏体相变行为研究

Study on the Formation and Mechanical Stability of Retained Austenite in Complex Phase Steel with High Formability

Investigation of thermal and fluid dynamics behaviors of melt pool during laser direct metal deposition on inclined substrates

Influence of Intercritical Annealing on Microstructure, Ductility, and Toughness of Medium Mn Steels

First-principles study of hydrogen trapping and diffusion mechanisms in vanadium carbide with connecting carbon vacancies

Unlocking the Mechanisms behind Austenite Formation of Cold‐Rolled Ferrite–Martensite Dual‐Phase Steels: The Role of Ferrite Recrystallization

一种铁素体-奥氏体相变动力学模型

Study on microstructure evolution, mechanical properties and deformation mechanism of Ti-6Al-4V alloy by hydraulic tension on-line warm rolling

Effect of initial grain size on the microstructure and mechanical properties of vacuum solution treated Ti–6Al–4V alloy

Preparation of high performance Ti–6Al–4V alloy thin strip by on-line warm rolling and study of its microstructure evolution and mechanical properties

Formation mechanism and microstructure evolution of light etched region during rolling contact fatigue in M50 steel

Microstructure Characteristics and Mechanical Properties of Flash Butt Welded 590 MPa V-N Microalloyed Heavy-Duty Truck Wheel Steel

Effect of solution treatments on microstructure and mechanical properties of Ti–6Al–4V alloy hot rolled sheet

In-situ Observation of High-temperature Phase Transformation of Ti-6Al-4V Titanium Alloy

铁素体区等温过程中Ti-Mo-Cu微合金钢中的共析出行为

Microstructure, crystallography, mechanical and damping properties of a low-carbon bainitic steel austempered at various temperatures

The Significance of Mn Prepartitioning on Bainitic Transformation and Mechanical Properties of a Low‐Carbon Bainitic Steel

Modelling and experimental validation of austenite growth from As-quenched martensite during intercritical annealing of a medium-Mn steel

Enhanced Strength and Toughness of Low‐Carbon Bainitic Steel by Refining Prior Austenite Grains and Austempering Below Ms

Effect of pulse frequency on the morphology, microstructure, and corrosion resistance of high‑nitrogen steel prepared by laser directed energy deposition

Effect of the Initial Microstructure and Thermal Path on the Final Microstructure and Bendability of a High Strength Ferrite-martensite Dual Phase Steel

Investigation of the underwater laser directed energy deposition technique for the on-site repair of HSLA-100 steel with excellent performance

High-performance Ti-6Al-4V with graded microstructure and superior properties fabricated by powder feeding underwater laser metal deposition

Enhancement of Balance in Strength, Ductility, and Stretch Flangeability by Two-Step Austempering in a 1000 MPa Grade Cold Rolled Bainitic Steel

Melt pool evolution on inclined NV E690 steel plates during laser direct metal deposition

The Role of Microstructural Constituents on Strength–Ductility–Local Formability of a Transformation‐Induced‐Plasticity‐Aided Bainitic Steel

等温淬火工艺对超高强贝氏体钢组织性能影响

奥氏体化条件对高强度贝氏体钢相变动力学的影响

Improvement of strength-toughness combination in austempered low carbon bainitic steel: The key role of refining prior austenite grain size

Microstructural evolution and mechanical properties of low-carbon steel treated by a two-step quenching and partitioning process

热轧冷却方式和冷轧压下率对含钛IF钢冷轧板组织和力学性能的影响

Effect of Austempering Route on Microstructural Characterization of Nanobainitic Steel

Fabrication and Microstructural Control of Nano-structured Bulk Steels: A Review

Comparison on mechanical properties and microstructure of a C–Mn–Si steel treated by quenching and partitioning (Q&P) and quenching and tempering (Q&T) processes

Effect of microstructural constituents on strength–toughness combination in a low carbon bainitic steel

Effect of Austempering Route on Microstructural Characterization of Nanobainitic Steel

含Cu低碳钢Q&P工艺处理的组织性能与强化机理

Ultrafine Grained Steels with Improved Ductility Fabricated by Repetitive Thermo‐Mechanical Processing

控轧控冷工艺对高强度结构钢组织及力学性能的影响

工艺参数对高强度钢强度及韧性的影响

钢材品种升级——从低合金高强度到低成本高性能

High performance low cost steels with ultrafine grained and multi-phased microstructure

马氏体冷轧—回火制备超细晶钢及其热稳定性

终冷温度对高强度工程机械用钢性能的影响

Ultrafine Ferrite Grains Produced by Tempering Cold-rolled Martensite in Low Carbon and Microalloyed Steels

会议论文

冷轧低合金高强钢再结晶和析出行为研究

马氏体冷轧—区淬火制备超细双相钢

书籍章节

High Strength-Ductility Combination of a Medium-Mn Steel Through Pre-annealing and Fast Heating