董祉序｜沈阳工业大学｜学者主页

2026

基于GA-RF的螺杆转子砂带磨削表面粗糙度预测

李越，杨赫然，孙兴伟，董祉序，刘寅

《制造技术与机床》

2026

Research on predicting spindle rotational error in spiral groove CNC milling machines

He-Ran Yang, Yi-You Wang, Xing-Wei Sun, Zhi-Xu Dong, Yin Liu, Shi-Bo Mu, Li-Ya Jin

The International Journal of Advanced Manufacturing Technology

DOI

2026

Meshing principle of a constant-transmission ratio hybrid-mismatch conical-surface-enveloping cylindrical worm-Archimedean face worm gear drive

Shi-Bo Mu, Yuan Yang, Xing-Wei Sun, Zhi-Xu Dong, Fang Yan, Yin Liu, Sheng Qu, Fei Pan, Weifeng Zhang, Ya-Ping Zhao

Mechanism and Machine Theory

DOI

2025

基于SSA-GA-BP神经网络的激光三角法测量误差研究

肖清浩，董祉序，孙兴伟，杨赫然，刘寅

《仪表技术与传感器》

2025

基于麻雀算法优化神经网络的螺杆砂带磨削去除深度预测

杨赫然，张培杰，孙兴伟，潘飞，董祉序，刘寅

《表面技术》

DOI

2025

基于微量润滑的多主元高熵合金铣削加工数值模拟

吴岩伟，刘寅，孙兴伟，杨赫然，董祉序，张维锋

《金刚石与磨料磨具工程》

DOI

2025

基于RF-LSSVM的螺杆铣削颤振监测

孙兴伟，李佳，杨赫然，张维锋，董祉序，刘寅

《振动、测试与诊断》

DOI

2025

A Study of the Double-Headed Screw Rotor Profile Measured by the Laser Displacement Sensor Under Multifactor Constraints

Dongxu Bao, Zhixu Dong, Dongxu Zhou, Mengnan Sun, Ke Zhang

IEEE Sensors Journal

DOI

2025

Experimental investigations into surface quality of milling with minimal quantity lubrication for multi elements high-entropy alloy

Jin-Kai Hu, Yin Liu, Yan-Wei Wu, He-Ran Yang, Zhi-Xu Dong, Xing-Wei Sun, Shi-Bo Mu, Hong-Xun Zhao, Sheng Qu

The International Journal of Advanced Manufacturing Technology

DOI

2025

Research on Curvature Interference Characteristics of Conical Surface Enveloping Cylindrical Worm–Face Worm Gear Drive

Shi-Bo Mu, Xing-Wei Sun, Zhi-Xu Dong, He-Ran Yang, Yin Liu, Weifeng Zhang, Sheng Qu, Hong-Xun Zhao, Ya-Ping Zhao

Applied Sciences

DOI

2025

The effect of novel silica-based polishing solution on the UV-CMP performances of K9 optical glass

Sheng Qu, Xing-Wei Sun, Zhi-Xu Dong, Shi-Bo Mu, Hong-Xun Zhao, Tian-Biao Yu, Zhe-Lun Ma, Zi-Xuan Wang, Ji Zhao

Ceramics International

DOI

2025

Thermal error modeling of feed system based on digital twin fusion and transfer learning under complex operating conditions

Shuai-Shuai Zhu, Hong-Xun Zhao, Xing-Wei Sun, He-Ran Yang, Zhi-Xu Dong

Journal of Intelligent Manufacturing

DOI

2025

Influence of processing parameters on the quality of laser-assisted belt grinding of titanium alloys and optimization of processing parameters

Fei Pan, Xing-Wei Sun, He-Ran Yang, Yin Liu, Hong-Xun Zhao, Zhi-Xu Dong, Shi-Bo Mu, Hua Gao

The International Journal of Advanced Manufacturing Technology

DOI

2025

Meshing theory of point-contact conical-envelope cylindrical worm-face worm gear drive

Shi-Bo Mu, Xing-Wei Sun, Zhi-Xu Dong, He-Ran Yang, Yin Liu, Weifeng Zhang, Qing-Xiang Meng, Ya-Ping Zhao

Mechanism and Machine Theory

DOI

2025

Study on the polishing mechanism under the combined effect of K2CO3, KH550 and ultrasonic vibration for K9 optical glass

Sheng Qu, Zhijie Cui, X. Chu, Xing-Wei Sun, Zhi-Xu Dong, He-Ran Yang, Yin Liu, Zi-Xuan Wang, Tian-Biao Yu, Ji Zhao

Applications of Surface Science

DOI

2025

Experimental investigations into the effect of low-temperature milling process on burr morphology, chip morphology and tool wear for cocrfenimn high-entropy alloy

Zhenshan Luo, Yin Liu, He-Ran Yang, Zhi-Xu Dong, Xing-Wei Sun, Ze-Wei Yuan, Shi-Bo Mu, Hong-Xun Zhao, Sheng Qu

The International Journal of Advanced Manufacturing Technology

DOI

2025

Experimental investigations into milling characteristics of CoCrFeNiMn high-entropy alloy assisted by low-temperature regulation

Yin Liu, Zhenshan Luo, Haosheng Dong, Xing-Wei Sun, Cuiping Li, He-Ran Yang, Shi-Bo Mu, Hong-Xun Zhao, Zhi-Xu Dong

Journal of the Brazilian Society of Mechanical Sciences and Engineering

DOI

2025

Optimization of the components and polishing performances of SiO2 slurry containing K2CO3 and KH550 for UV-CMP of K9 optical glass

Sheng Qu, Zhijie Cui, Chao Zhang, Xing-Wei Sun, Zhi-Xu Dong, He-Ran Yang, Yin Liu, Zi-Xuan Wang, Tian-Biao Yu, Ji Zhao

Ceramics International

DOI

2025

Effect of low-temperature on the surface quality for Zr-based bulk metallic glass using by milling-grinding composite processing

Yuxuan Lu, Xing-Wei Sun, Yin Liu, Zhi-Xu Dong, He-Ran Yang, Sheng Qu, Hong-Xun Zhao, Shi-Bo Mu, Fei Pan, Ze-Wei Yuan

Applied Physics A

DOI

2025

Measurement of crack cavity evolution based on decorrelated digital volume correlation

Haodi Tang, Derui Li, Bin Cheng, Zhixu Dong

Measurement

DOI

2024

基于改进支持向量机的砂带磨损程度识别

陈斯睿，孙兴伟，杨赫然，董祉序，刘寅

《电子测量与仪器学报》

2024

基于改进松鼠搜索算法优化神经网络的数控机床进给系统热误差预测

杨赫然，李帅，孙兴伟，董祉序，刘寅

《仪器仪表学报》

DOI

2024

空间调制型偏振成像的滤波器带宽优化方法研究

董祉序，杨澍，郭仁杰，孙梦楠，孙兴伟

《仪器仪表学报》

DOI

2024

工艺参数对不锈钢管切割表面质量的影响研究

李和伟，孙兴伟，杨赫然，董祉序，刘寅

《组合机床与自动化加工技术》

2024

基于激光测量的螺纹廓形数据降噪处理方法

蔡雨辰，董祉序，杨赫然，刘寅

《机械工程与自动化》

2024

螺杆铣床主轴振动对螺杆转子表面质量影响分析

林泽利，孙兴伟，杨赫然，张维锋，董祉序，赵泓荀

《振动与冲击》

2024

切削参数对ZrO2陶瓷切削过程影响的数值模拟

吕世聪，刘寅，孙兴伟，董祉序，杨赫然，张维锋

《金刚石与磨料磨具工程》

2024

新工科视域下机械类专业学位研究生创新能力提升研究

杨赫然，孙兴伟，董祉序，刘寅

《高教学刊》

2024

ITO导电玻璃单颗磨粒切削机理仿真试验研究

邱晓龙，孙兴伟，刘寅，杨赫然，董祉序，张维锋

《金刚石与磨料磨具工程》

2024

A process parameters decision approach considering spindle vibration in helical surface milling for minimising energy consumption and surface roughness value

Weifeng Zhang, Xing-Wei Sun, He-Ran Yang, Yin Liu, Zhi-Xu Dong, Hong-Xun Zhao, Shi-Bo Mu, Jiahao Chen

Journal of the Brazilian Society of Mechanical Sciences and Engineering

DOI

2024

Simulation and experimental study on microgrinding mechanism and machining morphology of ITO conductive glass

Xing-Wei Sun, Xiaolong Qiu, Yin Liu, Fei Pan, Jiahao Chen, Weifeng Zhang, Zhi-Xu Dong, He-Ran Yang

The International Journal of Advanced Manufacturing Technology

DOI

2024

Simulation and experimental investigation of material removal profile based on ultrasonic vibration polishing of K9 optical glass

Sheng Qu, Xing-Wei Sun, Zhi-Xu Dong, Yin Liu, He-Ran Yang, Weifeng Zhang, Shi-Bo Mu, Zi-Xuan Wang, Tian-Biao Yu, Ji Zhao

Tribology International

DOI

2024

Comparative study of tool wear mechanisms in drilling ZrO2 ceramics using various tool types

Yin Liu, Shicong Lv, Xing-Wei Sun, He-Ran Yang, Zhi-Xu Dong, Shi-Bo Mu, Weifeng Zhang, Ya-Dong Gong

Journal of the Brazilian Society of Mechanical Sciences and Engineering

DOI

2024

Integrated thermal error modeling and compensation of machine tool feed system using subtraction-average-based optimizer-based CNN-GRU neural network

Tongtong Yang, Xing-Wei Sun, He-Ran Yang, Yin Liu, Hong-Xun Zhao, Zhi-Xu Dong, Shi-Bo Mu

The International Journal of Advanced Manufacturing Technology

DOI

2024

Correction to: Integrated thermal error modeling and compensation of machine tool feed system using subtraction‑average‑based optimizer‑based CNN‑GRU neural network

Tongtong Yang, Xing-Wei Sun, He-Ran Yang, Yin Liu, Hong-Xun Zhao, Zhi-Xu Dong, Shi-Bo Mu

The International Journal of Advanced Manufacturing Technology

DOI

2023

基于CNN-GRU组合神经网络的数控机床进给系统热误差研究

孙兴伟，杨铜铜，杨赫然，董祉序，刘寅

《仪器仪表学报》

DOI

2023

基于改进神经网络算法的数控钻攻中心进给轴热误差预测

李帅，杨赫然，孙兴伟，潘飞，董祉序，刘寅

《电子测量与仪器学报》

2023

基于结构光测量技术的DMD自适应掩膜生成

郑小钰，董祉序，杨赫然，孙兴伟，刘寅

《电子测量与仪器学报》

2023

基于激光三角位移传感器的双头螺杆在机测量系统

Meng-Nan Sun, Zhi-Xu Dong, Wei Xu, Ming-Xuan Liu, Xing-Wei Sun

Chinese Journal of Lasers

DOI

2023

基于数字微镜的高动态范围成像方法研究

郑小钰，杨赫然，孙兴伟，董祉序，刘寅

《机械工程与自动化》

2023

螺杆转子磨削去除深度研究

陈斯睿，孙兴伟，袁立志，董祉序，刘寅，杨赫然

《机械工程与自动化》

2023

基于改进鲸鱼算法的B样条曲线拟合

李赫，董祉序

《机械工程与自动化》

2023

盘铣刀铣削过程中刀具磨损研究

辛明泽，孙兴伟，董祉序，刘寅，袁立志，杨赫然

《机械工程与自动化》

2023

数控机床进给系统热特性分析

李帅，杨赫然，孙兴伟，董祉序，刘寅

《机械工程与自动化》

2023

基于响应面法的分级注水泥器结构优化

徐瑞强，孙兴伟，刘寅，杨赫然，董祉序

《石油机械》

2023

Experimental investigations into groove bottom surface roughness for Zr-based bulk metallic glass by using milling

Yin Liu, Zhichao Song, Zheng Liang, Xiaoqing Cui, Ya-Dong Gong, Xing-Wei Sun, Zhi-Xu Dong, He-Ran Yang, Wei-Jun Liu

The International Journal of Advanced Manufacturing Technology

DOI

2023

Simulation experimental investigations into material removal mechanism of SiC ceramic by using drilling-grinding composite machining

Yin Liu, Jiahao Chen, Xing-Wei Sun, Zhi-Xu Dong, He-Ran Yang, Hong-Xun Zhao, Shi-Bo Mu, Weifeng Zhang, Ya-Dong Gong, Wei-Jun Liu

The International Journal of Advanced Manufacturing Technology

DOI

2023

Experimental investigations into effect of milling parameters on milling force and burr micromorphology for Zr-based bulk metallic glass by using groove milling

Yin Liu, Ya-Dong Gong, Xiaoqing Cui, Zheng Liang, Wei-Jun Liu, Ze-Wei Yuan, He-Ran Yang, Zhi-Xu Dong, Xing-Wei Sun

The International Journal of Advanced Manufacturing Technology

DOI

2022

基于隐式Adams方法的螺旋曲面铣削系统稳定性预测研究

杨赫然，耿超绪，孙兴伟，董祉序

《振动与冲击》

2022

流体粘度对涡轮流量计计量特性影响研究

孙兴伟，李宜霖，杨赫然，董祉序，王海燕

《仪器仪表学报》

DOI

2022

基于砂带表面磨粒分布的螺杆曲面重复磨削区域表面粗糙度预测

董浩生，杨赫然，孙兴伟，董祉序，刘寅

《电子测量与仪器学报》

2022

基于改进神经网络算法的螺杆砂带磨削表面粗糙度预测研究

董浩生，杨赫然，孙兴伟，董祉序，刘寅

《表面技术》

2022

基于响应面和人群搜索算法的固井泥浆流量计叶轮结构参数优化

李宜霖，孙兴伟，杨赫然，王海燕，刘寅，董祉序

《电子测量与仪器学报》

2022

基于改进BP神经网络的螺杆转子铣削表面粗糙度预测

杨赫然，孙兴伟，戚朋，董祉序，刘寅

《电子测量与仪器学报》

2022

基于改进的微面元偏振BRDF模型的粗糙表面偏振反射特性分析

白鹏涛，孙兴伟，董祉序，刘寅，杨赫然

《激光杂志》

2022

基于样条函数改进的傅里叶积分重建算法研究

于雪，孙兴伟，董祉序，刘寅，杨赫然，吴翔恂

《机械工程与自动化》

2022

基于数字微镜的高动态调光方法

贺晚秋，孙兴伟，董祉序，刘寅，杨赫然，郑小钰

《激光杂志》

2022

螺旋槽专用数控铣床立柱拓扑优化设计

薛柏惠，杨赫然，孙兴伟，董祉序，刘寅

《机械工程与自动化》

2022

涂层表面反射偏振建模及其特性分析方法

Zhi-Xu Dong, Peng-Tao Bai, Wei Xu, Yin Liu, Xing-Wei Sun

Acta Optica Sinica

DOI

2022

基于响应面法与粒子群算法的石油管螺纹激光清洗工艺参数优化

Xing-Wei Sun, Zhong Zhang, He-Ran Yang, Zhi-Xu Dong, Yin Liu

Chinese Journal of Lasers

DOI

2022

钢板锈蚀层激光清洗的热力学分析研究

张众，孙兴伟，杨赫然，董祉序，刘寅

《制造技术与机床》

DOI

2022

Study on dip error compensation model of laser displacement sensor and its application in measurement of spiral curved surface profile

Zhi-Xu Dong, Ren-Jie Guo, Meng-Nan Sun, Wei Xu

Optical Engineering: The Journal of SPIE

DOI

2021

基于改进遗传算法的机床主轴径向回转误差分离技术研究

杨赫然，赵桐，孙兴伟，董祉序，刘鹏君

《仪器仪表学报》

DOI

2021

基于切削微元的盘铣刀铣削力预测研究

孙兴伟，戚朋，杨赫然，董祉序

《组合机床与自动化加工技术》

DOI

2021

盘铣刀装配状态下的动态特性分析研究

耿超绪，杨赫然，孙兴伟，董祉序，王海燕

《机械工程与自动化》

2021

基于新型小波阈值函数的降噪方法研究

徐方素，孙兴伟，董祉序，王海燕，杨赫然

《机械工程与自动化》

2021

基于EEMD的数据降噪算法研究

薛峰，孙兴伟，董祉序，杨赫然，王海燕

《机械工程与自动化》

2020

基于EMD的螺杆转子激光测量信号去噪算法研究

卜凡娜，杨赫然，孙兴伟，董祉序，王海燕，杜晓宇

《机械工程与自动化》

2020

一种变角度相贯坡口的加工路径优化方法研究

韩坤，孙兴伟，杨赫然，董祉序，刘伟军，刘广鹏，杜晓宇

《机械工程与自动化》

2020

三螺杆泵从动杆截面造型与切削轨迹规划研究

张禹，孙兴伟，杨赫然，董祉序，杨冬，张妮妮，杜晓宇

《机械工程与自动化》

2020

A Low-Rank and Sparse Decomposition-Based Method of Improving the Accuracy of Sub-Pixel Grayscale Centroid Extraction for Spot Images

Zhi-Xu Dong, Xing-Wei Sun, Fangsu Xu, Wei-Jun Liu

IEEE Sensors Journal

DOI

2019

基于改进精英克隆选择算法的B样条曲线逼近方法

董祉序，徐方素，孙兴伟，刘伟军

《仪器仪表学报》

DOI

2019

铣削螺杆钻具转子有限元模态分析

姜丽杰，王海燕，黄德涛，孙兴伟，杨赫然，董祉序

《机械工程与自动化》

2019

锥双螺杆螺旋槽加工中的刀具加工参数研究

张静，王俊英，王海燕，孙兴伟，杨赫然，董祉序

《机械工程与自动化》

2019

CDIO模式在面向工程教育专业认证的《机械制造装备设计》课程教学中的研究与设计

杨赫然，孙兴伟，董祉序，潘飞

《教育现代化》

DOI

2019

An on-machine precision measurement method for API threads

Zhi-Xu Dong, Xing-Wei Sun, C. Chen, He-Ran Yang

Measurement science and technology

DOI

2019

A Laser-Based On-Machine Measuring System for Profile Accuracy of Double-Headed Screw Rotor

Zhi-Xu Dong, Fangsu Xu, Xing-Wei Sun, Wei-Jun Liu

Italian National Conference on Sensors

DOI

2019

An improved signal processing method for the laser displacement sensor in mechanical systems

Zhi-Xu Dong, Xing-Wei Sun, C. Chen, He-Ran Yang, Li-Jian Yang

Mechanical systems and signal processing

DOI

2018

基于激光位移传感器的自由曲面精密测量方法

董祉序，孙兴伟，刘伟军，杨理践，王雷

《仪器仪表学报》

DOI

2018

激光三角法高精度测量模型

孙兴伟，于欣玉，董祉序，杨赫然

《红外与激光工程》

2018

Research on the On-machine Precise Measurement Method for Drill Pipe Thread

Zhi-Xu Dong

DOI

2018

High accuracy measurement model of laser triangulation method

Xing-Wei Sun, Xin-Yun Yu, Zhi-Xu Dong, He-Ran Yang

DOI

2018

A Fast and On-Machine Measuring System Using the Laser Displacement Sensor for the Contour Parameters of the Drill Pipe Thread

Zhi-Xu Dong, Xing-Wei Sun, C. Chen, Meng-Nan Sun

Italian National Conference on Sensors

DOI

2018

Measurement of Free-Form Curved Surfaces Using Laser Triangulation

Zhi-Xu Dong, Xing-Wei Sun, Wei-Jun Liu, He-Ran Yang

Italian National Conference on Sensors

DOI

2017

钻杆管螺纹型面信息在机测量方法研究

孙兴伟，于欣玉，董祉序

《组合机床与自动化加工技术》

2016

石油钻杆螺纹廓形参数在机测量系统研究

王可，董祉序，孙兴伟，华晋伟

《仪器仪表学报》

DOI

2016

On-machine laser reflection detection and feedback compensation device and method for profile of oil thread

Xing-Wei Sun, Ke Wang, Zhi-Xu Dong

2016

On-machine laser direct detection device for profile accuracy of oil thread and measurement method

Ke Wang, Xing-Wei Sun, Zhi-Xu Dong

2016

Pipe Thread-Intelligent Detection and Restoration Technology

Ke Wang, Zhi-Xu Dong, Wen-Qing Jing

DOI

2015

平衡面轴向位置对影响系数动平衡法的影响

董祉序，王可，武国奎，孙兴伟，孙梦楠

《机床与液压》

2015

多头螺杆钻具等壁厚定子衬套的性能分析

王可，董祉序，梁利，孙兴伟

《机床与液压》

精选作品

期刊论文

基于GA-RF的螺杆转子砂带磨削表面粗糙度预测

Research on predicting spindle rotational error in spiral groove CNC milling machines

Meshing principle of a constant-transmission ratio hybrid-mismatch conical-surface-enveloping cylindrical worm-Archimedean face worm gear drive

基于SSA-GA-BP神经网络的激光三角法测量误差研究

基于麻雀算法优化神经网络的螺杆砂带磨削去除深度预测

基于微量润滑的多主元高熵合金铣削加工数值模拟

基于RF-LSSVM的螺杆铣削颤振监测

A Study of the Double-Headed Screw Rotor Profile Measured by the Laser Displacement Sensor Under Multifactor Constraints

Experimental investigations into surface quality of milling with minimal quantity lubrication for multi elements high-entropy alloy

Research on Curvature Interference Characteristics of Conical Surface Enveloping Cylindrical Worm–Face Worm Gear Drive

The effect of novel silica-based polishing solution on the UV-CMP performances of K9 optical glass

Thermal error modeling of feed system based on digital twin fusion and transfer learning under complex operating conditions

Influence of processing parameters on the quality of laser-assisted belt grinding of titanium alloys and optimization of processing parameters

Meshing theory of point-contact conical-envelope cylindrical worm-face worm gear drive

Study on the polishing mechanism under the combined effect of K2CO3, KH550 and ultrasonic vibration for K9 optical glass

Experimental investigations into the effect of low-temperature milling process on burr morphology, chip morphology and tool wear for cocrfenimn high-entropy alloy

Experimental investigations into milling characteristics of CoCrFeNiMn high-entropy alloy assisted by low-temperature regulation

Optimization of the components and polishing performances of SiO2 slurry containing K2CO3 and KH550 for UV-CMP of K9 optical glass

Effect of low-temperature on the surface quality for Zr-based bulk metallic glass using by milling-grinding composite processing

Measurement of crack cavity evolution based on decorrelated digital volume correlation

基于改进支持向量机的砂带磨损程度识别

基于改进松鼠搜索算法优化神经网络的数控机床进给系统热误差预测

空间调制型偏振成像的滤波器带宽优化方法研究

工艺参数对不锈钢管切割表面质量的影响研究

基于激光测量的螺纹廓形数据降噪处理方法

螺杆铣床主轴振动对螺杆转子表面质量影响分析

切削参数对ZrO2陶瓷切削过程影响的数值模拟

新工科视域下机械类专业学位研究生创新能力提升研究

ITO导电玻璃单颗磨粒切削机理仿真试验研究

A process parameters decision approach considering spindle vibration in helical surface milling for minimising energy consumption and surface roughness value

Simulation and experimental study on microgrinding mechanism and machining morphology of ITO conductive glass

Simulation and experimental investigation of material removal profile based on ultrasonic vibration polishing of K9 optical glass

Comparative study of tool wear mechanisms in drilling ZrO2 ceramics using various tool types

Integrated thermal error modeling and compensation of machine tool feed system using subtraction-average-based optimizer-based CNN-GRU neural network

Correction to: Integrated thermal error modeling and compensation of machine tool feed system using subtraction‑average‑based optimizer‑based CNN‑GRU neural network

基于CNN-GRU组合神经网络的数控机床进给系统热误差研究

基于改进神经网络算法的数控钻攻中心进给轴热误差预测

基于结构光测量技术的DMD自适应掩膜生成

基于激光三角位移传感器的双头螺杆在机测量系统

基于数字微镜的高动态范围成像方法研究

螺杆转子磨削去除深度研究

基于改进鲸鱼算法的B样条曲线拟合

盘铣刀铣削过程中刀具磨损研究

数控机床进给系统热特性分析

基于响应面法的分级注水泥器结构优化

Experimental investigations into groove bottom surface roughness for Zr-based bulk metallic glass by using milling

Simulation experimental investigations into material removal mechanism of SiC ceramic by using drilling-grinding composite machining

Experimental investigations into effect of milling parameters on milling force and burr micromorphology for Zr-based bulk metallic glass by using groove milling

基于隐式Adams方法的螺旋曲面铣削系统稳定性预测研究

流体粘度对涡轮流量计计量特性影响研究

基于砂带表面磨粒分布的螺杆曲面重复磨削区域表面粗糙度预测

基于改进神经网络算法的螺杆砂带磨削表面粗糙度预测研究

基于响应面和人群搜索算法的固井泥浆流量计叶轮结构参数优化

基于改进BP神经网络的螺杆转子铣削表面粗糙度预测

基于改进的微面元偏振BRDF模型的粗糙表面偏振反射特性分析

基于样条函数改进的傅里叶积分重建算法研究

基于数字微镜的高动态调光方法

螺旋槽专用数控铣床立柱拓扑优化设计

涂层表面反射偏振建模及其特性分析方法

基于响应面法与粒子群算法的石油管螺纹激光清洗工艺参数优化

钢板锈蚀层激光清洗的热力学分析研究

Study on dip error compensation model of laser displacement sensor and its application in measurement of spiral curved surface profile

基于改进遗传算法的机床主轴径向回转误差分离技术研究

基于切削微元的盘铣刀铣削力预测研究

盘铣刀装配状态下的动态特性分析研究

基于新型小波阈值函数的降噪方法研究

基于EEMD的数据降噪算法研究

基于EMD的螺杆转子激光测量信号去噪算法研究

一种变角度相贯坡口的加工路径优化方法研究

三螺杆泵从动杆截面造型与切削轨迹规划研究

A Low-Rank and Sparse Decomposition-Based Method of Improving the Accuracy of Sub-Pixel Grayscale Centroid Extraction for Spot Images

基于改进精英克隆选择算法的B样条曲线逼近方法

铣削螺杆钻具转子有限元模态分析

锥双螺杆螺旋槽加工中的刀具加工参数研究

CDIO模式在面向工程教育专业认证的《机械制造装备设计》课程教学中的研究与设计

An on-machine precision measurement method for API threads

A Laser-Based On-Machine Measuring System for Profile Accuracy of Double-Headed Screw Rotor

An improved signal processing method for the laser displacement sensor in mechanical systems